Question How do you root moto g power 2021 xt2117-4 - Moto G Power (2021)

How do you root moto g power 2021 xt2117-4
Does anyone know how thx in advance

gfhgfjfh said:
How do you root moto g power 2021 xt2117-4
Does anyone know how thx in advance
Click to expand...
Click to collapse
[Guide] Root Motorola with Magisk (UnLocked Bootloader)(Non-TWRP method)
Root Motorola Devices with Magisk Note: This method has been working with most Moto Devices that the Bootloader can be UnLocked. If the Bootloader cannot be Unlocked this method will not work. Please only use this as a reference. If you require...
forum.xda-developers.com

Yes that's the only way to go if you want root it works listen to your senior members

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot "C:\Program Files (x86)\Minimal ADB and Fastboot\boot.img"
target reported max download size of 804474880 bytes
sending 'boot_a' (65536 KB)...
OKAY [ 2.800s]
writing 'boot_a'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 3.157s
need help iam stuck on this

@gfhgfjfh
I think you need to 'fastboot reboot bootloader', once before you try flashing it. Likely you are not in the fastbootd but just fastboot. I know, it's crazy, but that's how mine worked.

gfhgfjfh said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot "C:\Program Files (x86)\Minimal ADB and Fastboot\boot.img"
target reported max download size of 804474880 bytes
sending 'boot_a' (65536 KB)...
OKAY [ 2.800s]
writing 'boot_a'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 3.157s
need help iam stuck on this
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot "C:\Program Files (x86)\Minimal ADB and Fastboot\magisk_patched.img"
target reported max download size of 804474880 bytes
sending 'boot_a' (65536 KB)...
OKAY [ 2.575s]
writing 'boot_a'...
OKAY [ 0.530s]
finished. total time: 3.111s
now iam at this point am i flashing it wrong iam so close

gfhgfjfh said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot "C:\Program Files (x86)\Minimal ADB and Fastboot\magisk_patched.img"
target reported max download size of 804474880 bytes
sending 'boot_a' (65536 KB)...
OKAY [ 2.575s]
writing 'boot_a'...
OKAY [ 0.530s]
finished. total time: 3.111s
now iam at this point am i flashing it wrong iam so close
Click to expand...
Click to collapse
iam also getting damn fingerprint error code or something

and now i touch phone screen and it doesnt do anything the touch sensor doesnt work like the is broke or something

gfhgfjfh said:
and now i touch phone screen and it doesnt do anything the touch sensor doesnt work like the is broke or something
Click to expand...
Click to collapse
That's usually caused by using the wrong boot.img
I would reflash the full firmware, and use that boot.img to patch.

sd_shadow said:
That's usually caused by using the wrong boot.img
I would reflash the full firmware, and use that boot.img to patch.
Click to expand...
Click to collapse
i cant use the touchscreen i dont know why i can use the power and volume buttons

gfhgfjfh said:
i cant use the touchscreen i dont know why i can use the power and volume buttons
Click to expand...
Click to collapse
Because the boot.img doesn't match the other firmware.

sd_shadow said:
Because the boot.img doesn't match the other firmware.
Click to expand...
Click to collapse
so is there a solution

what is the code to flash

gfhgfjfh said:
what is the code to flash
Click to expand...
Click to collapse
The easiest way is just to use LMSA
or
You need to find the Device Model #, Codename, Software Channel, and build #

sd_shadow said:
The easiest way is just to use LMSA
or
You need to find the Device Model #, Codename, Software Channel, and build #
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-borneo_t-b56067c181a-210805
(bootloader) product: borneo
(bootloader) board: borneo
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB MICRON S0J9K8 RV=08 PV=10 FV=0000000000000004
(bootloader) ufs: N/A
(bootloader) ram: 4GB MICRON LP4x DIE=16Gb M5-M8=FF 04 10 10
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: ZY22BZ4KB8
(bootloader) cid: 0x0015
(bootloader) channelid: 0x99
(bootloader) uid: A46D6C6D
(bootloader) securestate: flashing_unlocked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 804474880
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 03-23-2021
(bootloader) sku: XT2117-4
(bootloader) carrier_sku: XT2117-4
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 3845
(bootloader) iccid: 8901240242700527772
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: boost
(bootloader) ro.build.fingerprint[0]: motorola/borneo_t/borneo:10/QZBS30
(bootloader) ro.build.fingerprint[1]: .Q4-43-43-8/eb1b9:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.73.08p BORNEO_NA_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Thu Feb 4 22:38
(bootloader) kernel.version[3]: :02 CST 2021
(bootloader) git:xbl: MBM-3.0-borneo_t-9304f2ad5-210805
(bootloader) git:xbl_config: MBM-3.0-borneo_t-9304f2ad5-210805
(bootloader) git:abl: MBM-3.0-borneo_t-b56067c181a-210805
(bootloader) git:rpm: MBM-3.0-borneo_t-6b0a297-210805
(bootloader) git:tz: MBM-3.0-borneo_t-9de24c4c2-210805
(bootloader) git:hyp: MBM-3.0-borneo_t-9de24c4c2-210805
(bootloader) git:devcfg: MBM-3.0-borneo_t-9de24c4c2-210805
(bootloader) git:keymaster: MBM-3.0-borneo_t-3b8c7a4-210805
(bootloader) git:storsec: MBM-3.0-borneo_t-3b8c7a4-210805
(bootloader) git:uefisecapp: MBM-3.0-borneo_t-3b8c7a4-210805
(bootloader) gitrov: MBM-3.0-borneo_t-9de24c4c2-210805
(bootloader) git:qupfw: MBM-3.0-borneo_t-f07d142-210805
(bootloader) frp-state: protected (210)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 6
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28C86870
(bootloader) primary-display: tm_ili9881x_video_display
(bootloader) secondary-display:
all: listed above

can you help me by looking at that

gfhgfjfh said:
can you help me by looking at that
Click to expand...
Click to collapse
hey what file do i flash the stock or what

gfhgfjfh said:
hey what file do i flash the stock or what
Click to expand...
Click to collapse
Code:
product: borneo
sku: XT2117-4
ro.carrier: boost
Q4-43-43-8/
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
borneo/official/Boost/
XT2117-4_BORNEO_T_BOOST_10_QZBS30.Q4-43-43-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Download this firmware
Find the service_file.xml
open it with notepad++
copy the text
paste in text box at Online FlashFile Converter
or use LMSA

sd_shadow said:
Code:
product: borneo
sku: XT2117-4
ro.carrier: boost
Q4-43-43-8/
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
borneo/official/Boost/
XT2117-4_BORNEO_T_BOOST_10_QZBS30.Q4-43-43-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Download this firmware
Find the service_file.xml
open it with notepad++
copy the text
paste in text box at Online FlashFile Converter
or use LMSA
Click to expand...
Click to collapse
thx man i got it your a lifesaver

Related

Problem with switching from CWM to TWRP on XT1021, urgent!

I solved it somehow. I was able to flash with fastboot the image TWRP 2.8.7 but I can't flash any other TWRP version.
Somebody have any idea why?
Hi guys,
I've got a really big problem that I cannot solve until now so I'm asking for you help.
Some information:
Phone: XT1021 European version
Recovery: TWRP 3.2.0.0
Bootloader: Unlocked (confirmed today)
Flashed: With magisk
Laptop: Ubuntu with adb and fastboot installed
I installed yesterday the newest Version of AOSPExtended of Android 8.1.0 on my device.
Worked flawlessly.
Afterwards I tried to flash the newest TWRP 3.2.3.0.img, so I booted in the recovery and flashed it. After that the recovery was gone and I wasn't able to start the ROM anymore.
My SD-Card broke as well and was only in a read-only-state, so I bought a new one and replaced it.
I followed this guide Unbrick phone and this guide on github with method 5 Github to put my phone back in stock version.
I succeeded to start the Stock ROM and continued to install CWM and flashing SuperSU following this guide SuperSU.
It all worked out. So far so good.
But now I have the problem that I cannot flash any TWRP image. I followed this Guide step by step. After that my laptop shows me this error.
[email protected] ~/Downloads/github $ fastboot flash recovery recoverycwm.img
target reported max download size of 299892736 bytes
sending 'recovery' (8102 KB)...
OKAY [ 0.279s]
writing 'recovery'...
OKAY [ 0.918s]
finished. total time: 1.197s
[email protected] ~/Downloads/github $ fastboot flash recovery twrp-2.7.1.0-condor.img
target reported max download size of 299892736 bytes
sending 'recovery' (6 KB)...
OKAY [ 0.032s]
writing 'recovery'...
(bootloader) Invalid boot image
FAILED (remote failure)
finished. total time: 0.051s
So I'm not able at all to flash TWRP. I tried with different versions and I'm asking for your help.
Thanks a lot.
This is the result of the command fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 500E
(bootloader) product: condor
(bootloader) secure: yes
(bootloader) hwrev: 0x82B0
(bootloader) radio: 0x1
(bootloader) emmc: 4GB Micron REV=06 PRV=12 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8210 CS
(bootloader) serialno: hidden by me
(bootloader) cid: 0x0007
(bootloader) channelid: 0x45
(bootloader) uid: hidden by me
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 299892736
(bootloader) reason: Volume down key pressed
(bootloader) imei: hidden by me
(bootloader) meid:
(bootloader) date: 11-03-2014
(bootloader) sku: XT1021
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Feb 22 14: 9:18 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/condor_retde/condor_umts:
(bootloader) ro.build.fingerprint[1]: 5.1/LPCS23.13-34.8-3/3:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.full[0]: Blur_Version.23.201.3.condor_retd
(bootloader) ro.build.version.full[1]: e.retdeall.en.DE
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband: hidden by me
(bootloader) kernel.version[0]: Linux version 3.4.42-g70ad15f ([email protected]
(bootloader) kernel.version[1]: ilclbld72) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Mon Feb 22 08:31:09 CST 2016
(bootloader) sdi.git: git=MBM-NG-V50.0E-0-g3ccd862
(bootloader) sbl1.git: git=MBM-NG-V50.0E-0-g20700d2
(bootloader) rpm.git: git=MBM-NG-V50.0E-0-gcebb121
(bootloader) tz.git: git=MBM-NG-V50.0E-0-g65c6b0f
(bootloader) aboot.git: git=MBM-NG-V50.0E-0-g4ed7eaf
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 1/1
(bootloader) ro.carrier: retde
all: listed above
finished. total time: 0.060s
I solved it. I was able to install the TWRP app in Cyanogenmod 12.1 and to flash TWRP 3.2.3.0.
It seems like all the files I downloaded from twrp.me were corrupted so I wasn't able to flash them, so check your md5.
Thread can be marked as solved and closed.

Moto E5 Plus - Flashing Locked - No System - Only Access to fastboot & TWRP

Hello folks!
Long time lurker. Now it's me who's bricked their phone and needs help. I've already put over 30 hs troubleshooting this and I'm out of options.
I'm trying to revive a moto E5 Plus (XT1924-5).I fiddled with it trying to flash it back to stock and relock it.
It now boots directly into bootloader and probably needs stock to be reflashed. The problem is that flashing is locked and I cannot enable OEM unlock since I cannot access system. Information below:
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: -----------
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1a
(bootloader) uid: D8912C2100000000000000000000
(bootloader) securestate: flashing_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: UTAG "bootmode" configured as fastboot
(bootloader) imei: -----------
(bootloader) meid:
(bootloader) date: 09-20-2018
(bootloader) sku: XT1924-5
(bootloader) carrier_sku: XT1924-5
(bootloader) battid: SNN5989A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Dec 29 3: 6:21 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.311.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAM_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=f9c74b2
(bootloader) devcfg.git: git=f9c74b2
(bootloader) keymaster.git: git=f9c74b2
(bootloader) cmnlib.git: git=f9c74b2
(bootloader) cmnlib64.git: git=f9c74b2
(bootloader) prov.git: git=f9c74b2
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retar
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.119s
Code:
>fastboot oem unlock
...
(bootloader) invalid boot state
OKAY [ 0.003s]
finished. total time: 0.004s
Code:
fastboot flashing unlock
...
(bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer
(bootloader) Options.
OKAY [ 0.005s]
finished. total time: 0.006s
I've already tried the following:
1) Flash Stock downloaded from lolinet (firmware/moto/rhannah/official/RETAR/) and from Lenovo Moto Smart Assistant. They fail because flashing is locked.
2) Flashing through Lenovo Moto Smart Assistant. It fails with no comment/log. Probably because of the above.
3) Flashing boot and recovery using TWRP, then try to boot and/or flash stock. No luck.
4) I tried to change the flashing_locked flag using "adb shell setprop ro.oem_unlock_supported 1" and "adb shell setprop ro.oem_unlock_allowed 1". The flags don't get saved after the phone boots again into fastboot.
4) booting stock image using "fastboot boot boot.im" and try to flash stock. It's still not allowed.
As far as I know the potential solutions may be:
a) build a TWRP flashable image using the stock images. I tried doing it using ASSAYYED_KITCHEN but it does not seem to support sparsechung system images. I'm blocked.
b) intentionally hardbrick the phone and blankflash it. I don't know how to harbrick it and I don't have access to the blankflash image.
Any help or guidance may be highly appreciated :fingers-crossed:. Thanks os much in advance!
Bumping! I'd appreciate some help, I'm stuck and without a phone.
simon917 said:
Bumping! I'd appreciate some help, I'm stuck and without a phone.
Click to expand...
Click to collapse
Although there is no section for your device.
You can post in
https://forum.xda-developers.com/moto-e5/help
Your posts will get more relevant views that way.
Sent from my ali using XDA Labs
sd_shadow said:
Although there is no section for your device.
You can post in
https://forum.xda-developers.com/moto-e5/help
Your posts will get more relevant views that way.
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Thanks!
simon917 said:
Thanks!
Click to expand...
Click to collapse
Unfortunately I don't think there's a solution to your problem.
Looks like the system partitions are messed up.
Lots of similar posts across the Moto devices.
Are you flashing with standard fastboot.exe or mfastboot.exe ?
Sent from my ali using XDA Labs
sd_shadow said:
Unfortunately I don't think there's a solution to your problem.
Looks like the system partitions are messed up.
Lots of similar posts across the Moto devices.
Are you flashing with standard fastboot.exe or mfastboot.exe ?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
I tried both fastboot and mfastboot. The partition gpt.bin can be reflashed, but the rest of the images cannot:
Code:
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot oem fb_mode_set
...
OKAY [ 0.002s]
finished. total time: 0.003s
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (45 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.081s]
finished. total time: 0.088s
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot flash bootloader bootloader.img
target max-sparse-size: 256MB
sending 'bootloader' (7483 KB)...
OKAY [ 0.238s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Committing 'bootloader.default.xml'
(bootloader) - flashing 'emmc_appsboot.mbn' to 'aboot'
(bootloader) - flashing 'rpm.mbn' to 'rpm'
(bootloader) - flashing 'tz.mbn' to 'tz'
(bootloader) - flashing 'devcfg.mbn' to 'devcfg'
(bootloader) - flashing 'cmnlib.mbn' to 'cmnlib'
(bootloader) - flashing 'cmnlib64.mbn' to 'cmnlib64'
(bootloader) - flashing 'keymaster.mbn' to 'keymaster'
(bootloader) - flashing 'prov.mbn' to 'prov'
(bootloader) - flashing 'sbl1.mbn' to 'sbl1'
OKAY [ 0.898s]
finished. total time: 1.138s
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (68730 KB)...
OKAY [ 2.165s]
writing 'modem'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 2.170s
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (16384 KB)...
OKAY [ 0.517s]
writing 'boot'...
(bootloader) flash permission denied
FAILED (remote failure)
Does this shed any light?
Hello please i have same phone, only acces fastboot and twrp but oem Unlock, please help me bro
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZL5223WDJH
(bootloader) cid: 0x0032
(bootloader) channelid: 0x18
(bootloader) uid: 17E0C47C00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351878090871116
(bootloader) meid:
(bootloader) date: 05-20-2018
(bootloader) sku: XT1924-4
(bootloader) carrier_sku: XT1924-4
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 31 19:39:17 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.331.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=9692555-dirty
(bootloader) devcfg.git: git=9692555-dirty
(bootloader) keymaster.git: git=9692555
(bootloader) cmnlib.git: git=9692555
(bootloader) cmnlib64.git: git=9692555
(bootloader) prov.git: git=9692555-dirty
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tigco
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
pepoxxx said:
Hello please i have same phone, only acces fastboot and twrp but oem Unlock, please help me bro
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZL5223WDJH
(bootloader) cid: 0x0032
(bootloader) channelid: 0x18
(bootloader) uid: 17E0C47C00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351878090871116
(bootloader) meid:
(bootloader) date: 05-20-2018
(bootloader) sku: XT1924-4
(bootloader) carrier_sku: XT1924-4
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 31 19:39:17 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.331.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=9692555-dirty
(bootloader) devcfg.git: git=9692555-dirty
(bootloader) keymaster.git: git=9692555
(bootloader) cmnlib.git: git=9692555
(bootloader) cmnlib64.git: git=9692555
(bootloader) prov.git: git=9692555-dirty
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tigco
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Click to expand...
Click to collapse
Try LMSA's Flash Rescue
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk

Moto E5 play XT1921-3 (James T-Mobile variant) won't read sim card after flashing stock firmware

It all started when I wanted to root my phone so that I could move more apps to my sd card. I followed this tutorial: https://www.theworldsbestandworst.com/2020/06/root-motorola-moto-e5-play/ but the version of SuperSU they had me install bricked my phone (My phone would freeze on startup at the t-mobile logo).
So, having done so in the past, I knew I could flash the stock firmware and hopefully get my phone back to working condition. I tried using two different downloads of the stock firmware. One from here: https://sourceforge.net/projects/moto-e5-firmware/files/JAMES/XT1921-3/ and one from here: https://forum.xda-developers.com/t/...he-e5-play-xt1921-3-t-mobile-variant.3839675/ (it's the link first given by timjames474). For both downloads I used the batch file method of flashing described here:
because RSDLite wasn't detecting my device. However, both of the times I tried flashing the stock firmware my phone worked normally but was unable to detect my sim card.
Was I using the wrong download of stock firmware? Is my phone broken for good? Please help me.
tezcatlipoca7123 said:
It all started when I wanted to root my phone so that I could move more apps to my sd card. I followed this tutorial: https://www.theworldsbestandworst.com/2020/06/root-motorola-moto-e5-play/ but the version of SuperSU they had me install bricked my phone (My phone would freeze on startup at the t-mobile logo).
So, having done so in the past, I knew I could flash the stock firmware and hopefully get my phone back to working condition. I tried using two different downloads of the stock firmware. One from here: https://sourceforge.net/projects/moto-e5-firmware/files/JAMES/XT1921-3/ and one from here: https://forum.xda-developers.com/t/...he-e5-play-xt1921-3-t-mobile-variant.3839675/ (it's the link first given by timjames474). For both downloads I used the batch file method of flashing described here:
because RSDLite wasn't detecting my device. However, both of the times I tried flashing the stock firmware my phone worked normally but was unable to detect my sim card.
Was I using the wrong download of stock firmware? Is my phone broken for good? Please help me.
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
Here is what my terminal returns when I enter getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.45
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY323SRCZP
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 09E5223100000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 354146092420788
(bootloader) meid:
(bootloader) date: 03-18-2019
(bootloader) sku: XT1921-3
(bootloader) carrier_sku: XT1921-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint[0]: motorola/james_t/james:8.0.0/OCP27
(bootloader) ro.build.fingerprint[1]: .91-51-4/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g5480efb-0001
(bootloader) kernel.version[1]: 6-gd2768b6 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.8 (GCC) ) #1 SMP PREEMPT Fri Jul
(bootloader) kernel.version[3]: 20 10:36:48 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VB9.45-0-geb7a3e0
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=5fefee4-dirty
(bootloader) devcfg.git: git=5fefee4-dirty
(bootloader) keymaster.git: git=5fefee4
(bootloader) cmnlib.git: git=5fefee4
(bootloader) cmnlib64.git: git=5fefee4
(bootloader) prov.git: git=5fefee4-dirty
(bootloader) aboot.git: git=MBM-NG-VB9.45-0-gff56367
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: tmo
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.772s
tezcatlipoca7123 said:
Here is what my terminal returns when I enter getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.45
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY323SRCZP
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 09E5223100000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 354146092420788
(bootloader) meid:
(bootloader) date: 03-18-2019
(bootloader) sku: XT1921-3
(bootloader) carrier_sku: XT1921-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint[0]: motorola/james_t/james:8.0.0/OCP27
(bootloader) ro.build.fingerprint[1]: .91-51-4/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g5480efb-0001
(bootloader) kernel.version[1]: 6-gd2768b6 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.8 (GCC) ) #1 SMP PREEMPT Fri Jul
(bootloader) kernel.version[3]: 20 10:36:48 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VB9.45-0-geb7a3e0
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=5fefee4-dirty
(bootloader) devcfg.git: git=5fefee4-dirty
(bootloader) keymaster.git: git=5fefee4
(bootloader) cmnlib.git: git=5fefee4
(bootloader) cmnlib64.git: git=5fefee4
(bootloader) prov.git: git=5fefee4-dirty
(bootloader) aboot.git: git=MBM-NG-VB9.45-0-gff56367
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: tmo
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.772s
Click to expand...
Click to collapse
The firmware you are using should be correct.
getvar say baseband is missing
Code:
(bootloader) version-baseband: <not found>
and both system slots are INVALID
Not a good sign.
You didn't see any flashing errors?
RSD Lite doesn't work with Windows 10, do you have a Windows 7 machine?
Try posting the service.xml text in https://kfhost.net/flashfile
and compare with your batch file.
sd_shadow said:
The firmware you are using should be correct.
getvar say baseband is missing
Code:
(bootloader) version-baseband: <not found>
and both system slots are INVALID
Not a good sign.
You didn't see any flashing errors?
RSD Lite doesn't work with Windows 10, do you have a Windows 7 machine?
Try posting the service.xml text in https://kfhost.net/flashfile
and compare with your batch file.
Click to expand...
Click to collapse
The batch file I had was slightly different than the one produced by the website you had me use. I replaced the batch file's contents and flashed the firmware again. I got these errors (not sure if 'image signed with key bad key' is an error so I'm including it just incase):
(bootloader) is-logical:FSG: not found
Sending 'FSG' (1696 KB) OKAY [ 0.222s]
Writing 'FSG' (bootloader) Invalid partition name FSG
FAILED (remote: '')
fastboot: error: Command failed
(bootloader) is-logicalSP: not found
Sending 'DSP' (16384 KB) OKAY [ 0.689s]
Writing 'DSP' (bootloader) Invalid partition name DSP
FAILED (remote: '')
fastboot: error: Command failed
(bootloader) is-logical:boot: not found
Sending 'boot' (16384 KB) OKAY [ 0.526s]
Writing 'boot' (bootloader) Image signed with key bad key
OKAY [ 0.553s]
Finished. Total time: 1.279s
(bootloader) is-logical:recovery: not found
Sending 'recovery' (16484 KB) OKAY [ 0.698s]
Writing 'recovery' (bootloader) Image signed with key bad key
OKAY [ 0.584s]
Finished. Total time: 1.316s
I got the same bad key errors when I flashed the firmware with my first batch file. After this flash the phone still works normally besides not being able to read the sim card.
tezcatlipoca7123 said:
The batch file I had was slightly different than the one produced by the website you had me use. I replaced the batch file's contents and flashed the firmware again. I got these errors (not sure if 'image signed with key bad key' is an error so I'm including it just incase):
(bootloader) is-logical:FSG: not found
Sending 'FSG' (1696 KB) OKAY [ 0.222s]
Writing 'FSG' (bootloader) Invalid partition name FSG
FAILED (remote: '')
fastboot: error: Command failed
(bootloader) is-logicalSP: not found
Sending 'DSP' (16384 KB) OKAY [ 0.689s]
Writing 'DSP' (bootloader) Invalid partition name DSP
FAILED (remote: '')
fastboot: error: Command failed
(bootloader) is-logical:boot: not found
Sending 'boot' (16384 KB) OKAY [ 0.526s]
Writing 'boot' (bootloader) Image signed with key bad key
OKAY [ 0.553s]
Finished. Total time: 1.279s
(bootloader) is-logical:recovery: not found
Sending 'recovery' (16484 KB) OKAY [ 0.698s]
Writing 'recovery' (bootloader) Image signed with key bad key
OKAY [ 0.584s]
Finished. Total time: 1.316s
I got the same bad key errors when I flashed the firmware with my first batch file. After this flash the phone still works normally besides not being able to read the sim card.
Click to expand...
Click to collapse
Strange you shouldn't have a recovery.img
Can you attach the service.xml ?
sd_shadow said:
Strange you shouldn't have a recovery.img
Can you attach the service.xml ?
Click to expand...
Click to collapse
I did have twrp on my phone before the flash
Here's the servicefile.xml, the firmware doesn't have a service.xml:
tezcatlipoca7123 said:
I did have twrp on my phone before the flash
Click to expand...
Click to collapse
Devices with a/b system slots don't have a recovery partition it's part of the boot.img now
so now when you install Twrp or magisk the boot partition must be changed.
Here's the servicefile.xml, the firmware doesn't have a service.xml:
Click to expand...
Click to collapse
Yes, my bad
Try just
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Tried it, each command comes back "OKAY". My phone still can't read the sim card though.
tezcatlipoca7123 said:
Tried it, each command comes back "OKAY". My phone still can't read the sim card though.
Click to expand...
Click to collapse
Windows 10?
sd_shadow said:
Windows 10?
Click to expand...
Click to collapse
Yes, I have have an older machine but I don't know if it still works or what version it is.
tezcatlipoca7123 said:
Yes, I have have an older machine but I don't know if it still works or what version it is.
Click to expand...
Click to collapse
If it's XP or 7 you could try RSD Lite
With the current machine, have you updated adb files?
Tried different USB ports?
sd_shadow said:
If it's XP or 7 you could try RSD Lite
With the current machine, have you updated adb files?
Tried different USB ports?
Click to expand...
Click to collapse
The other pc is also windows 10 .
I'm using the most current platform-tools.
I'll try using other usb ports but my computer doesn't have trouble connecting to my phone so I'm not sure how that'd help (or if your talking about trying to get RSD Lite to work I've already tried other usb ports).
tezcatlipoca7123 said:
The other pc is also windows 10 .
Click to expand...
Click to collapse
The only time RSD Lite has worked for me with Windows 10 is if it originally shipped with 7 and was upgraded to 10.
Man any solutions? I reinstalled firmware, after unlocking bootloader then I flashed twrp and magisk using that twrp but my baseband version is unknown, IMEI unknown.
but my Wi-Fi is working fine, Can someone guide me through with it?
muneebwolf said:
Man any solutions? I reinstalled firmware, after unlocking bootloader then I flashed twrp and magisk using that twrp but my baseband version is unknown, IMEI unknown.
but my Wi-Fi is working fine, Can someone guide me through with it?
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.4A
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY323JV88W
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: B94B05DB00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 354146091881899
(bootloader) meid:
(bootloader) date: 12-17-2018
(bootloader) sku: XT1921-3
(bootloader) carrier_sku: XT1921-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 9:35:18 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/james_t/james:8.0.0/OCPS2
(bootloader) ro.build.fingerprint[1]: 7.91-150-5-1-3/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.311.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gf60ba68 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Tue May 7 15:58:26 CDT
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VB9.4A-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=7a51f9f-dirty
(bootloader) devcfg.git: git=7a51f9f-dirty
(bootloader) keymaster.git: git=7a51f9f
(bootloader) cmnlib.git: git=7a51f9f
(bootloader) cmnlib64.git: git=7a51f9f
(bootloader) prov.git: git=7a51f9f-dirty
(bootloader) aboot.git: git=MBM-NG-VB9.4A-0-g4e376e8
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: tmo
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
muneebwolf said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.4A
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY323JV88W
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: B94B05DB00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 354146091881899
(bootloader) meid:
(bootloader) date: 12-17-2018
(bootloader) sku: XT1921-3
(bootloader) carrier_sku: XT1921-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 9:35:18 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/james_t/james:8.0.0/OCPS2
(bootloader) ro.build.fingerprint[1]: 7.91-150-5-1-3/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.311.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gf60ba68 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Tue May 7 15:58:26 CDT
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VB9.4A-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=7a51f9f-dirty
(bootloader) devcfg.git: git=7a51f9f-dirty
(bootloader) keymaster.git: git=7a51f9f
(bootloader) cmnlib.git: git=7a51f9f
(bootloader) cmnlib64.git: git=7a51f9f
(bootloader) prov.git: git=7a51f9f-dirty
(bootloader) aboot.git: git=MBM-NG-VB9.4A-0-g4e376e8
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: tmo
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Click to expand...
Click to collapse
Looks like you have this version
XT1921-3_JAMES_TMO_8.0.0_OCPS27.91-150-5-1-3_cid21_subsidy-MPCS_RSU_regulatory-DEFAULT_CFC.xml.zip
this is the newest version
XT1921-3_JAMES_TMO_8.0.0_OCPS27.91-150-14-13_cid21_subsidy-TMO_RSU_regulatory-DEFAULT_CFC.xml.zip
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
but that shouldn't have anything do with your problem, unless you have been flashing a different version than 27.91-150-5-1-3
The invalid slots are worrisome, often with this problem, a blankflash is needed to fix it.
Are you using flashfile.xml to get the correct flash commands?
sd_shadow said:
Looks like you have this version
XT1921-3_JAMES_TMO_8.0.0_OCPS27.91-150-5-1-3_cid21_subsidy-MPCS_RSU_regulatory-DEFAULT_CFC.xml.zip
this is the newest version
XT1921-3_JAMES_TMO_8.0.0_OCPS27.91-150-14-13_cid21_subsidy-TMO_RSU_regulatory-DEFAULT_CFC.xml.zip
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
but that shouldn't have anything do with your problem, unless you have been flashing a different version than 27.91-150-5-1-3
The invalid slots are worrisome, often with this problem, a blankflash is needed to fix it.
Are you using flashfile.xml to get the correct flash commands?
Click to expand...
Click to collapse
Man I used downloaded this firmware from lolinet, used all the necessary commands but still its not working, and yes I used flashfile.xml

Question How do I recover after re-locking the bootloader?

I relocked the bootloader using "fastboot oem lock" and I've lost the OS. When I use LMSA and try the rescue option it fails in the Flashing section before it can load the OS image file. It fails every time during Flashings before reaching 50%. Any suggestions?
dary1361 said:
I relocked the bootloader using "fastboot oem lock" and I've lost the OS. When I use LMSA and try the rescue option it fails in the Flashing section before it can load the OS image file. It fails every time during Flashings before reaching 50%. Any suggestions?
Click to expand...
Click to collapse
Try unlock code again
sd_shadow said:
Try unlock code again
Click to expand...
Click to collapse
Below I have copied what I get when I try the unlock code.
I cant change OEM unlock setting since the OS wont boot. When I start the device I get "No valid operating system could be found. The device will not boot."
PS D:\platform-tools> .\fastboot oem unlock "UNIQUE_KEY"
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
FAILED (remote: '')
fastboot: error: Command failed
dary1361 said:
Below I have copied what I get when I try the unlock code.
I cant change OEM unlock setting since the OS wont boot. When I start the device I get "No valid operating system could be found. The device will not boot."
PS D:\platform-tools> .\fastboot oem unlock "UNIQUE_KEY"
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
FAILED (remote: '')
fastboot: error: Command failed
Click to expand...
Click to collapse
Try flashing stock manually with fastboot
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
Try flashing stock manually with fastboot
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
I followed the video and created the "servicefile.bat" file. But when I run it, I get the below message. All the flash commands fail. Is it a bootloader locked issue? But the fastboot unlock command doesn't work and the OS does not load, for me to unlock.
D:\RSD_Lite_v6.2.4\GUAMNA_RETAIL_QZAS30.Q4_39_35_4_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>echo off
max-sparse-size: 268435456
Finished. Total time: 0.004s
OKAY [ 0.002s]
Finished. Total time: 0.003s
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
.
.
.
dary1361 said:
I followed the video and created the "servicefile.bat" file. But when I run it, I get the below message. All the flash commands fail. Is it a bootloader locked issue? But the fastboot unlock command doesn't work and the OS does not load, for me to unlock.
D:\RSD_Lite_v6.2.4\GUAMNA_RETAIL_QZAS30.Q4_39_35_4_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>echo off
max-sparse-size: 268435456
Finished. Total time: 0.004s
OKAY [ 0.002s]
Finished. Total time: 0.003s
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
.
.
.
Click to expand...
Click to collapse
What does getvar all say? (remove imei before posting)
Code:
fastboot getvar all
Here is the result.
PS D:\platform-tools> .\fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-guamna_retail-bfe8cf6b47-210204
(bootloader) product: guamna
(bootloader) board: guamna
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: GWLC
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SKHYNIX hB8aP> RV=08 PV=03 FV=0000000034303030
(bootloader) ufs: N/A
(bootloader) ram: 3GB SKHYNIX LP4x DIE=12Gb M5-M8=06 05 00 0D
(bootloader) cpu: SM_KAMORTA 1.0
(bootloader) serialno: **********
(bootloader) cid: ******
(bootloader) channelid: 0x8d
(bootloader) uid: ***********
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 798722048
(bootloader) reason: Volume down key pressed
(bootloader) imei: ***************
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 12-17-2020
(bootloader) sku: XT2093-4
(bootloader) carrier_sku: XT2093-4
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 4054
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retus
(bootloader) ro.build.fingerprint[0]: motorola/guamna_retail/guamna:10/Q
(bootloader) ro.build.fingerprint[1]: ZAS30.Q4-39-35-2/87822e:user/relea
(bootloader) ro.build.fingerprint[2]: se-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.52R GUAMNA_GWLC_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Thu Feb 4 01:17
(bootloader) kernel.version[3]: :32 CST 2021
(bootloader) git:xbl: MBM-3.0-guamna_retail-9304f2ad5-210204
(bootloader) git:xbl_config: MBM-3.0-guamna_retail-9304f2ad5-210204
(bootloader) git:abl: MBM-3.0-guamna_retail-bfe8cf6b47-210204
(bootloader) git:rpm: MBM-3.0-guamna_retail-6b0a297-210204
(bootloader) git:tz: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:hyp: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:devcfg: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:keymaster: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) git:storsec: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) git:uefisecapp: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) gitrov: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:qupfw: MBM-3.0-guamna_retail-f07d142-210204
(bootloader) frp-state: protected (77)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: yes
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: ***********
(bootloader) primary-display: hlt_hx83102d_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.216s
dary1361 said:
Here is the result.
PS D:\platform-tools> .\fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-guamna_retail-bfe8cf6b47-210204
(bootloader) product: guamna
(bootloader) board: guamna
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: GWLC
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SKHYNIX hB8aP> RV=08 PV=03 FV=0000000034303030
(bootloader) ufs: N/A
(bootloader) ram: 3GB SKHYNIX LP4x DIE=12Gb M5-M8=06 05 00 0D
(bootloader) cpu: SM_KAMORTA 1.0
(bootloader) serialno: **********
(bootloader) cid: ******
(bootloader) channelid: 0x8d
(bootloader) uid: ***********
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 798722048
(bootloader) reason: Volume down key pressed
(bootloader) imei: ***************
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 12-17-2020
(bootloader) sku: XT2093-4
(bootloader) carrier_sku: XT2093-4
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 4054
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retus
(bootloader) ro.build.fingerprint[0]: motorola/guamna_retail/guamna:10/Q
(bootloader) ro.build.fingerprint[1]: ZAS30.Q4-39-35-2/87822e:user/relea
(bootloader) ro.build.fingerprint[2]: se-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.52R GUAMNA_GWLC_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Thu Feb 4 01:17
(bootloader) kernel.version[3]: :32 CST 2021
(bootloader) git:xbl: MBM-3.0-guamna_retail-9304f2ad5-210204
(bootloader) git:xbl_config: MBM-3.0-guamna_retail-9304f2ad5-210204
(bootloader) git:abl: MBM-3.0-guamna_retail-bfe8cf6b47-210204
(bootloader) git:rpm: MBM-3.0-guamna_retail-6b0a297-210204
(bootloader) git:tz: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:hyp: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:devcfg: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:keymaster: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) git:storsec: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) git:uefisecapp: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) gitrov: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:qupfw: MBM-3.0-guamna_retail-f07d142-210204
(bootloader) frp-state: protected (77)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: yes
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: ***********
(bootloader) primary-display: hlt_hx83102d_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.216s
Click to expand...
Click to collapse
You are using this firmware?
https://mirrors.lolinet.com/firmware/moto/guamna/official/RETUS/
XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
I had used the ROM which LMSA recognizes and downloads, which is
GUAMNA_RETAIL_QZAS30.Q4_39_35_4_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml
I also tried with the one displayed after "getvar all" and which you suggested.
XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I get the same result.
C:\XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>echo off
max-sparse-size: 268435456
Finished. Total time: 0.001s
OKAY [ 0.002s]
Finished. Total time: 0.004s
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
fastboot: error: Command failed
Sending 'bootloader' (13824 KB) OKAY [ 0.359s]
Writing 'bootloader' (bootloader) Validating 'bootloader.default.xml'
(bootloader) flash permission denied
.
.
.
dary1361 said:
I had used the ROM which LMSA recognizes and downloads, which is
GUAMNA_RETAIL_QZAS30.Q4_39_35_4_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml
I also tried with the one displayed after "getvar all" and which you suggested.
XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I get the same result.
C:\XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>echo off
max-sparse-size: 268435456
Finished. Total time: 0.001s
OKAY [ 0.002s]
Finished. Total time: 0.004s
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
fastboot: error: Command failed
Sending 'bootloader' (13824 KB) OKAY [ 0.359s]
Writing 'bootloader' (bootloader) Validating 'bootloader.default.xml'
(bootloader) flash permission denied
.
.
.
Click to expand...
Click to collapse
Are just using the .bat ?
Try manually entering commands
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
sd_shadow said:
Are just using the .bat ?
Try manually entering commands
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
Click to expand...
Click to collapse
same
fastboot flash partition gpt.bin
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
fastboot: error: Command failed
Repeated the manual flash process using a mac system too. Used sudo.
Still getting
sudo ./fastboot flash partition gpt.bin
Password:
Sending 'partition' (37 KB) OKAY [ 0.002s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
fastboot: error: Command failed
Did I brick the phone? I just re-locked the bootloader!
Ok I'm having the same issue please tell me you figured it out.
wonderlandpoet said:
Ok I'm having the same issue please tell me you figured it out.
Click to expand...
Click to collapse
What does getvar all say? (remove imei before posting)
Code:
fastboot getvar all
sd_shadow said:
What does getvar all say? (remove imei before posting)
Code:
fastboot getvar all
Click to expand...
Click to collapse
sd_shadow said:
What does getvar all say? (remove imei before posting)
Code:
fastboot getvar all
Click to expand...
Click to collapse
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-borneo_retail-bfe8cf6b47-210331
(bootloader) product: borneo
(bootloader) board: borneo
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB MICRON S0J9K8 RV=08 PV=10 FV=0000000000000004
(bootloader) ufs: N/A
(bootloader) ram: 4GB MICRON LP4x DIE=16Gb M5-M8=FF 04 10 10
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: ZY22BNZWRJ
(bootloader) cid: 0x0032
(bootloader) channelid: 0x97
(bootloader) uid: 753B7C40
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (3)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 804474880
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-19-2021
(bootloader) sku: XT2117-4
(bootloader) carrier_sku: XT2117-4
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 4080
(bootloader) iccid: 8901260971168257655
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: fi
(bootloader) ro.build.fingerprint[0]: motorola/borneo_retail/borneo:10/Q
(bootloader) ro.build.fingerprint[1]: ZBS30.Q4-43-35-2/f8e93:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.57p BORNEO_NA_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Wed Mar 31 10:1
(bootloader) kernel.version[3]: 4:31 CDT 2021
(bootloader) git:xbl: MBM-3.0-borneo_retail-9304f2ad5-210331
(bootloader) git:xbl_config: MBM-3.0-borneo_retail-9304f2ad5-210331
(bootloader) git:abl: MBM-3.0-borneo_retail-bfe8cf6b47-210331
(bootloader) git:rpm: MBM-3.0-borneo_retail-6b0a297-210331
(bootloader) git:tz: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:hyp: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:devcfg: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:keymaster: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) git:storsec: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) git:uefisecapp: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) gitrov: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:qupfw: MBM-3.0-borneo_retail-f07d142-210331
(bootloader) frp-state: protected (475)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 1
(bootloader) slot-retry-count:_b: 7
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28C86870
(bootloader) primary-display: tm_ili9881x_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.156s
wonderlandpoet said:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-borneo_retail-bfe8cf6b47-210331
(bootloader) product: borneo
(bootloader) board: borneo
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB MICRON S0J9K8 RV=08 PV=10 FV=0000000000000004
(bootloader) ufs: N/A
(bootloader) ram: 4GB MICRON LP4x DIE=16Gb M5-M8=FF 04 10 10
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: ZY22BNZWRJ
(bootloader) cid: 0x0032
(bootloader) channelid: 0x97
(bootloader) uid: 753B7C40
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (3)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 804474880
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-19-2021
(bootloader) sku: XT2117-4
(bootloader) carrier_sku: XT2117-4
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 4080
(bootloader) iccid: 8901260971168257655
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: fi
(bootloader) ro.build.fingerprint[0]: motorola/borneo_retail/borneo:10/Q
(bootloader) ro.build.fingerprint[1]: ZBS30.Q4-43-35-2/f8e93:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.57p BORNEO_NA_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Wed Mar 31 10:1
(bootloader) kernel.version[3]: 4:31 CDT 2021
(bootloader) git:xbl: MBM-3.0-borneo_retail-9304f2ad5-210331
(bootloader) git:xbl_config: MBM-3.0-borneo_retail-9304f2ad5-210331
(bootloader) git:abl: MBM-3.0-borneo_retail-bfe8cf6b47-210331
(bootloader) git:rpm: MBM-3.0-borneo_retail-6b0a297-210331
(bootloader) git:tz: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:hyp: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:devcfg: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:keymaster: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) git:storsec: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) git:uefisecapp: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) gitrov: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:qupfw: MBM-3.0-borneo_retail-f07d142-210331
(bootloader) frp-state: protected (475)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 1
(bootloader) slot-retry-count:_b: 7
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28C86870
(bootloader) primary-display: tm_ili9881x_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.156s
Click to expand...
Click to collapse
Have you tried LMSA'S rescue option?
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
sd_shadow said:
Have you tried LMSA'S rescue option?
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes and I will start the download and it will sit at 0% for hours I click on settings then it says program not responding
Huh, why did the os disappear after relocking the bootloader..
What did you perform before relocking the bootloader?
ChazzMatt said:
You have to boot to the bootloader screen manually, using the volume + power button trick.
Once on the bootloader screen, when you plug you phone into a PC with ADB installed, it should recognize it.
Then, flash the full stock firmware, from the link above. It's Brazil Marshmallow firmware with December 2016 Security Update. I don't know of any newer right now. You have Brazil XT1225, so that Brazil firmware is compatible with your phone.
But with locked bootloader you have to flash exact same version or newer made for your phone, and you have to enter the commands correctly or you may brick your phone. (When I flashed from Puerto Rico Kitkat to India Lollipop, I messed up. But since my bootloader was unlocked, I just reflashed again, when I realized my mistake.)
If you are not sure of the steps, google Motorola firmware ADB. Here's a couple of excellent tutorials:
How to Manually Official Firmware on any Motorola Device
https://forum.xda-developers.com/dr...force-how-to-manually-flash-official-t3282077
I use this one above. IGNORE where it says you need an unlocked bootloader, because he's talking about cross-region flashing which you are NOT doing. You are flashing your own region firmware.
This one below is by rootjunky and he while he also discusses RSDLite, later in the article he says ADB/fastboot are best as RSDLite can stall.
Motorola Firmware Restore Plus Unbrick
http://www.rootjunky.com/motorola-firmware-restore/
If you get your phone running again, I suggest you unlock the bootloader. There are ways to hide an unlocked bootloader (like Magisk), if that's why you locked it back... But an unlocked bootloader + root makes it YOUR phone and much easier to recover from disasters.
Click to expand...
Click to collapse
This technique is for Motorola devices so it may work, I'm not sure I've ever owned one of those devices.
Get back to me if it works..

Question Moto G PLay (2021) cannot reunlock bootloader

Hey gang. I unlocked a motorola g play 2021 rooted it and tried to flash twrp onto it whch didnt work. So I flashed the boot.img file and it restarted as a new phone would. The next morning. bear with me here. It states no OS present to boot. So I restart the phone to the bootloader and it states the bootloader is locked and now will only restart to the bootloader. When I try to flash the recovery or boot image it just stated bootloader permission denied then it fails. I have been flashing samsungs for years with no problems and when there is I can usually solve it easily. But ths damn motorola has me stumped.. Here is the getvar all info. Any help possible would be greatly appreciated. Guess Im still more of an amature then i thought. Please advise. Thanks
I tried going through the unlock bootloader sequence and this is what it tells me.
C:\Android\platform-tools>fastboot oem unlock CSSPP***#*#********
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
FAILED (remote: '')
fastboot: error: Command failed
this got me back to Android recovery page. But when I try to do a factory reset it says no directory or file present
fastboot --c "console=ttyHSL0,115200,n8" boot recovery.img
The Lenovo rescue tool fails at 40% every time.
Unlock Code: CSSPP***************
get var all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-guamna_t-bfe8cf6b47-210609
(bootloader) product: guamna
(bootloader) board: guamna
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: GWLC
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SKHYNIX hB8aP> RV=08 PV=03 FV=0000000034303030
(bootloader) ufs: N/A
(bootloader) ram: 3GB SKHYNIX LP4x DIE=12Gb M5-M8=06 05 00 0D
(bootloader) cpu: SM_KAMORTA 1.0
(bootloader) serialno: ZY22BQWX4M
(bootloader) cid: 0x0015
(bootloader) channelid: 0x8e
(bootloader) uid: F66B2378
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 798750720
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351647111426774
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-20-2021
(bootloader) sku: XT2093-3
(bootloader) carrier_sku: XT2093-3
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 3854
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: metropcs
(bootloader) ro.build.fingerprint[0]: motorola/guamna_t/guamna:10/QZAS30
(bootloader) ro.build.fingerprint[1]: .Q4-39-57-2-2-1-1-3-3/882ca7:user/
(bootloader) ro.build.fingerprint[2]: release-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.73.08R GUAMNA_GWLC_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Wed Jun 9 07:26
(bootloader) kernel.version[3]: :55 CDT 2021
(bootloader) git:xbl: MBM-3.0-guamna_t-c904c5c3f-210609
(bootloader) git:xbl_config: MBM-3.0-guamna_t-c904c5c3f-210609
(bootloader) git:abl: MBM-3.0-guamna_t-bfe8cf6b47-210609
(bootloader) git:rpm: MBM-3.0-guamna_t-6b0a297-210609
(bootloader) git:tz: MBM-3.0-guamna_t-9de24c4c2-210609
(bootloader) git:hyp: MBM-3.0-guamna_t-9de24c4c2-210609
(bootloader) git:devcfg: MBM-3.0-guamna_t-9de24c4c2-210609
(bootloader) git:keymaster: MBM-3.0-guamna_t-3b8c7a4-210609
(bootloader) git:storsec: MBM-3.0-guamna_t-3b8c7a4-210609
(bootloader) git:uefisecapp: MBM-3.0-guamna_t-3b8c7a4-210609
(bootloader) gitrov: MBM-3.0-guamna_t-9de24c4c2-210609
(bootloader) git:qupfw: MBM-3.0-guamna_t-f07d142-210609
(bootloader) frp-state: protected (77)
(bootloader) current-slot: b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 1
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28C86657
(bootloader) primary-display: hlt_hx83102d_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.267s
Mikeo31 said:
Hey gang. I unlocked a motorola g play 2021 rooted it and tried to flash twrp onto it whch didnt work. So I flashed the boot.img file and it restarted as a new phone would. The next morning. bear with me here. It states no OS present to boot. So I restart the phone to the bootloader and it states the bootloader is locked and now will only restart to the bootloader. When I try to flash the recovery or boot image it just stated bootloader permission denied then it fails. I have been flashing samsungs for years with no problems and when there is I can usually solve it easily. But ths damn motorola has me stumped.. Here is the getvar all info. Any help possible would be greatly appreciated. Guess Im still more of an amature then i thought. Please advise. Thanks
I tried going through the unlock bootloader sequence and this is what it tells me.
C:\Android\platform-tools>fastboot oem unlock CSSPP***#*#********
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
FAILED (remote: '')
fastboot: error: Command failed
this got me back to Android recovery page. But when I try to do a factory reset it says no directory or file present
fastboot --c "console=ttyHSL0,115200,n8" boot recovery.img
The Lenovo rescue tool fails at 40% every time.
Unlock Code: CSSPP***************
get var all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-guamna_t-bfe8cf6b47-210609
(bootloader) product: guamna
(bootloader) board: guamna
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: GWLC
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SKHYNIX hB8aP> RV=08 PV=03 FV=0000000034303030
(bootloader) ufs: N/A
(bootloader) ram: 3GB SKHYNIX LP4x DIE=12Gb M5-M8=06 05 00 0D
(bootloader) cpu: SM_KAMORTA 1.0
(bootloader) serialno: ZY22BQWX4M
(bootloader) cid: 0x0015
(bootloader) channelid: 0x8e
(bootloader) uid: F66B2378
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 798750720
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351647111426774
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-20-2021
(bootloader) sku: XT2093-3
(bootloader) carrier_sku: XT2093-3
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 3854
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: metropcs
(bootloader) ro.build.fingerprint[0]: motorola/guamna_t/guamna:10/QZAS30
(bootloader) ro.build.fingerprint[1]: .Q4-39-57-2-2-1-1-3-3/882ca7:user/
(bootloader) ro.build.fingerprint[2]: release-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.73.08R GUAMNA_GWLC_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Wed Jun 9 07:26
(bootloader) kernel.version[3]: :55 CDT 2021
(bootloader) git:xbl: MBM-3.0-guamna_t-c904c5c3f-210609
(bootloader) git:xbl_config: MBM-3.0-guamna_t-c904c5c3f-210609
(bootloader) git:abl: MBM-3.0-guamna_t-bfe8cf6b47-210609
(bootloader) git:rpm: MBM-3.0-guamna_t-6b0a297-210609
(bootloader) git:tz: MBM-3.0-guamna_t-9de24c4c2-210609
(bootloader) git:hyp: MBM-3.0-guamna_t-9de24c4c2-210609
(bootloader) git:devcfg: MBM-3.0-guamna_t-9de24c4c2-210609
(bootloader) git:keymaster: MBM-3.0-guamna_t-3b8c7a4-210609
(bootloader) git:storsec: MBM-3.0-guamna_t-3b8c7a4-210609
(bootloader) git:uefisecapp: MBM-3.0-guamna_t-3b8c7a4-210609
(bootloader) gitrov: MBM-3.0-guamna_t-9de24c4c2-210609
(bootloader) git:qupfw: MBM-3.0-guamna_t-f07d142-210609
(bootloader) frp-state: protected (77)
(bootloader) current-slot: b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 1
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28C86657
(bootloader) primary-display: hlt_hx83102d_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.267s
Click to expand...
Click to collapse
Try flashing manually
LMSA should have a copy of firmware in C:\ProgramData\LMSA\Download\RomFiles
Or you can download it from
https://mirrors.lolinet.com/firmware/moto/guamna/official/MetroPCS/
XT2093-3_GUAMNA_METROPCS_10_QZAS30.Q4-39-57-2-2-1-1-3-3_subsidy-MPCS_RSU_QCOM_regulatory-DEFAULT_CFC.xml.zip
Unzip
First try
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot oem fb_mode_clear
fastboot reboot
It might boot normally
if not try
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
reboot bootloader
then try LMSA again
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
Try flashing manually
LMSA should have a copy of firmware in C:\ProgramData\LMSA\Download\RomFiles
Or you can download it from
https://mirrors.lolinet.com/firmware/moto/guamna/official/MetroPCS/
XT2093-3_GUAMNA_METROPCS_10_QZAS30.Q4-39-57-2-2-1-1-3-3_subsidy-MPCS_RSU_QCOM_regulatory-DEFAULT_CFC.xml.zip
Unzip
First try
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot oem fb_mode_clear
fastboot reboot
It might boot normally
if not try
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
reboot bootloader
then try LMSA again
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
thanks very much I'll give it a go and repost. @sd_shadow
Mikeo31 said:
thanks very much I'll give it a go and repost. @sd_shadow
Click to expand...
Click to collapse
No good. on the first method.
C:\adb>fastboot flash partition gpt.bin
target reported max download size of 798763008 bytes
sending 'partition' (37 KB)...
OKAY [ 0.009s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
finished. total time: 0.167s
No good on the 2nd method
Permission denied
FAILED(remote failure)
and the LMSA gets as far as 50% depending on which time I ran it and states
Flashboot Flash single partition
Flash failed please try again
Could it be something to do with the A/B Partition.? I flashed Magisk on one of them and it restarted. I went to bed and got up the next morning and here we are.
Hi I'm Steve I'm new here and I'm just learning how to root my phone and be a developer so if anybody could help me I really appreciate it
Is there a blank flash.zip yet for this phone? Usually I've seen mirrors.lolinet.com include blankflash files with each variant of moto phones. This one is an exception. Or can anyone make one perhaps?
I transferred the fastboot.exe out of the LMSA or RSA file, because I noticed it's something like 7.5mb, and seemed to gain extra fastboot functionality. This was when I encountered, maybe not exactly the same, but a similar issue with relocking the bootloader.
I used the command (after copying the Lincoln log of a fastboot executable to my working directory):
fastboot -b flash boot boot.img
And by some stroke of luck, it booted into the OS. I know that command looks weird, but I was so frustrated, I just started going down the list and trying everything I could. If you haven't tried switching boot slots, you may give that a whirl as well. I do hope this helps.
My setup is an old dual core Intel, with windows 10 version 20H1....one of the older windows 10 releases.
Mikeo31 said:
No good. on the first method.
C:\adb>fastboot flash partition gpt.bin
target reported max download size of 798763008 bytes
sending 'partition' (37 KB)...
OKAY [ 0.009s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
finished. total time: 0.167s
Click to expand...
Click to collapse
Did you fastboot oem fb_mode_set first?

Categories

Resources