Related
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
The goal of this ROM is to provide full Treble-compatible hardware support, and nothing else.
This means that hardware which DON'T have Treble API won't be supported, like Essential's external camera.
No feature will be added. This will ease forward porting to new Android versions, which is the very goal of Project Treble
My hope is that other ROM developers will use this ROM as a basis to construct more advanced ROM.
For a list of supported devices, consult and fill https://github.com/phhusson/treble_experimentations/wiki
How to flash:
Follow instructions available at https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Changelog
v29 (2019-03-06):
- March security patch
- Fix MT6739 incoming SMS and mobile data
v27 (2019-01-08):
- January security patch
- arm32_binder64 variant
- Minor stuff
v25 (2018-09-07)
- September security patch
- [Mi 6X/Mi Pad 4] Fix backlight
- [Mi Mix 2S] Disable fingerprint button behaviour
- [Galaxy S9/Note 9]
- Fix (some) MTK incoming call
- Fix a2dp on some devices
- Fix boot on some devices
v23 (2018-08-07):
- August security patch
- Fixes tethering on some Qualcomm devices (Thanks @notsyncing)
- Enable Ambient Display for everyone
- Add an off-computer flasher (first step towards OTA)
- Fixes MTP
- Fixes fingerprint on Moto devices
- Change Huawei quick charge based on device (Thanks @Dil3mm4 )
- Fixes camera on Moto devices
- Fix notches height for some devices (Thanks @tadiT7)
v22 (2018-07-03):
- July security patches
- Fixes Samsung Galaxy S9 fingerprint enrollment
- Fix in-call audio for Pixel 2
- Disable night mode on some MTK for which it is very slow
- Fix wifi tethering on some configurations
v21 (2018-06-27):
- [OnePlus 6] Fix booting on A slot
- [OnePlus 6] Fix userdata filesystem size
- [OnePlus 6] Include a framework-res overlay (fixes auto backlight, improve battery-life, ...)
- Fix status bar height for notches on various devices (Thanks @tadiT7)
- [Samsung Galaxy S9 Qualcomm] Fix backlight
- Fix webview in Android Go variant
- Fix audio jack for some devices
- Fix H264 encoding on Huawei (Thanks @OldDroid)
- Fix backlight on some SDM845 devices (Xiaomi Mi Mix 2S, Xiaomi Mi8)
v20 (2018-06-07):
- June Android security patch level
- New experimental FLOSS variant (check sources for list of apps)
- [OnePlus6] Fixes backlight
- [OnePlus6] Partial support for DnD slider
- Fixes bug on some A/B devices where device would stop booting after several success
v19 (2018-06-03):
- Huawei fast charge (Thanks @flex1911 and @OldDroid)
- Fix MTK TrustKernel TEE (those devices will need to factory reset!)
- Support 32bits Android 8.0 devices
- Rewrite Security Patch Level for Android 8.1 devices, and A/B devices as well. Should fix boot for some devices.
- Enable GPU profiling on Huawei devices to fix UI glitches
- Fixed Modded Google Camera installation
- Use round icons
- Enable doze
- New Android Go variant
- On Huawei devices add "Swipe fingerprint for notifications" option
- Releases are now compressed with xz. Uncompress before flashing.
v18 (2018-05-14):
- Update to Android Security Patch level 2018-05-01
- Disable HW keystore on mediatek devices using trustedkernel, until it is fixed
- Re-enable Huawei navigation keys (Thanks @LuK1337 and OpenKirin team)
- Fixes android build version/security patch level (might lead to stuck on bootanimation some devices)
- Enable NightMode for everyone
- Enable automatic backlight with Huawei Mate 9 settings on Huawei devices
- Remove unnecessary warning on boot (if you still get it, it means it is useful, to tell me!)
- Include android.system.net.netd, fixes data connection for several Qualcomm devices
v17: (2018-04-24)
- Fixes multimedia from SDCard
- Fixes in-call audio for Qualcomm devices
- Fixes in-call earpiece/speaker for Foxconn/Qualcomm devices (Razer Phone, Sharp Aquos S2, ...)
- Fixes signal level for Huawei devices (Thanks to OpenKirin team)
- Fixes boot on some A-only devices (HTC U11+, Xperia XZ1 at least)
- Report vendor's security patch level instead of framework security patch level
- Fix fsck for f2fs (Thanks @flex1911 and @LuK1337)
v16: (2018-04-05)
- Fixes MTP access to sdcard
- v15 was missing graphical glitches fix. Applied it again.
- Resize /system to maximum size on first boot
v15: (2018-04-03)
- Update to 2018-04-01 security patches
- Fixes FAT sdcards
- Fixes some USB-C headphones on some devices
- Fix Essential PH-1 boot
v14: (2018-03-26)
- Fixes Galaxy S9(+) backlight control
v13: (2018-03-23)
- Disable Android's fake touches, which made unlocking hard
- Fixes Galaxy S9 boot and WiFi
- Make system.img back to 1.5GB
- Disable again adb auth, to help debugging
v12: (2018-03-05)
- Updated to security patch 2018-03-01
- Various stability, behind-the scene, changes
- Fixes camera on MTK devices
- Support ARM32 devices
- Supports HW button backlight
v11: (2018-02-20):
- Fixes bluetooth on Kirin 970 devices (Thanks @LuK1337)
- Fixes sdcard on Huawei devices
- Includes nfc-nci.conf, should fix NFC on some devices
- Show real Android version (Thanks @LuK1337)
- Enable ADB authentification
v10: (2018-02-18)
- Android 8.1 !
- Includes versioned vndk, so devices running both 8.1 and 8.0 should work
v9: (2018/01/15)
- Include the compositing fixes for Kirin 970
- Crude support for Huawei fingerprint gestures (click = home, left = back, right = voice assistant, up = quick settings, down = notifications, long press = recent apps)
v8: (2018/01/14)
- Huawei compositing fixes (fixes various graphical glitches)
- Various su SELinux fixes
v7: (2017/12/30)
- Fixes various regressions (APNs, A/B, vanilla, fingerprint ...)
- Fixes dev/input requirement (not useful to any real-life product yet, afaik)
- Fixes some not-installable applications from Play Store
- Fixed substratum in phh's superuser
v6: (2017/12/19)
- Major code clean-up. Please report regressions
- Fixes random reboot on Huawei devices
- Optionally includes SU (you need to install phh's SuperUser from F-Droid/Play Store)
v5: (2017/12/14)
- Fixes FDE decryption (SystemUI was crashing in loop)
- Use a real list of APNs
- Include Chrome and Gboard (fixes IME crash when trying to input a symbol)
- Fixes SEPolicy for Hardware Overlay Picker (should fix crash of Hardware Overlay Picker on startup)
v4: (2017/12/10)
- Fixes sdcard in MTP
- Fixes Dual-SIM
- Includes hardware-specific overlays:
- Enable 4G selection in networks
- Bigger status bar on Essential PH-1
- Enable navigation bar on HTC U11+
v3: (2017/12/04)
- Fixes sdcard in MTP build fail, so will be fixed in next release
- New variant including gapps
v2: (2017/11/26)
- Fix wifi tethering
- Fix F2FS userdata
- Fix sdcard
- Fix fingerprint (Huawei)
Download:
https://github.com/phhusson/treble_experimentations/releases/download/v29
Want to chat about this project? Go to Freenode IRC, #phh-treble.
IRC: irc://irc.freenode.net/#phh-treble
WebIRC: http://webchat.freenode.net/?channels=#phh-treble&uio=d4
Matrix: #freenode_#phh-treble:matrix.org
Other chatrooms:
Telegram https://t.me/phhtreble
Thanks @MishaalRahman and @Exelios for the huge kickstart help
Thanks to all my donators:
- @Exelios
- @fargonaz
- @VictorM86
- @howdid
- @heatfire
- @ohwarumbloss
- @RexGoogolplex
- @abhas.abhia
- @Emoclaw
- @Sebianoti
- @DocRambone
- @egandt
- @Blackbird1997
- @Burakki
- @josdehaes
- @TheUndertaker21
Thanks to the following companies:
- Huawei, for a Huawei View 10
- Blackview, for a Blackview A20
PS: Yes the name sucks, but I'm clueless about a name
How to know if your phone is supported:
- Does your OEM provides a stock Oreo ROM?
No ===> Your phone is not supported
- Run Treble Check on stock Oreo ROM. Does it say Treble is supported?
No ===> Your phone is not supported
If all answers are yes, then your phone MIGHT be supported.
Test it, and report the result!
Build script available at https://github.com/phhusson/treble_experimentations/blob/master/build.sh
Current status:
Over-all:
Xperia XZ1:
- Broken camera (because of Sony's DRM)
Huawei Mate 9 Pro and Honor 9:
- Fingerprint sensor should have "home" behaviour
- software keys should be disabled
Known end-user problems (WON'T BE FIXED in this ROM):
- No exfat
Known mess:
- A-only should use https://android-review.googlesource.com/q/hashtag:"non-ab-boot-gsi"+(status:open OR status:merged) instead of dm-verity hacks
- the dm-verity work-around is also needed on A/B, so other patches are missing, for some other reason
- On A/B devices, this system.img effectively transforms the device into a userdebug build. This means adb root works!
adb root should work on A-only later too, though it requires that the OEM includes https://android-review.googlesource.com/q/topic:move-adbd-to-system+(status:open+OR+status:merged)
This can probably be worked-around by moving adbd inside a /system/etc/init/xxx.rc
- ADB auth is totally disabled at the moment on A/B, this is bad, but useful for debugging.
- Huawei (for instance Mate 9) doesn't declare android.hardware.fingerprint. This ROM does it for them, but this need to be better implemented
- SuperSU and Magisk screws with SELinux policy. DO NOT USE SuperSU OR Magisk WITH THIS ROM
Great work guys, indeed revolutionary work, Congrats
Can there be support for the LG optimous g pro
Leone/kyleproxx said:
Can there be support for the LG optimous g pro
Click to expand...
Click to collapse
That phone was released in 2013, so it's unlikely.
Support for Xiaomi Redmi Note 4 (mido), is it possible?
Following the project.
weldone @phhusson.
will this rom support oneplus5 later on?
jef_00 said:
will this rom support oneplus5 later on?
Click to expand...
Click to collapse
OnePlus said they won't support Treble, so no.
You can try to complain to them, since all they do is because for good PR.
phhusson said:
OnePlus said they won't support Treble, so no.
You can try to complain to them, since all they do is because for good PR.
Click to expand...
Click to collapse
thanks for you answer mate
Wonderful work you're doing here! Would you mind explaining what is the A/B only versions? What do those letters mean? Are there means of reverting back from your experimental build to stock Oreo?
Swan Princess said:
Wonderful work you're doing here! Would you mind explaining what is the A/B only versions? What do those letters mean? Are there means of reverting back from your experimental build to stock Oreo?
Click to expand...
Click to collapse
A/B refers to the new partitioning system on the Pixel and Essential devices. It has one active slot and a backup slot for all parts of the system, so you'll have a boot_a and boot_b, system_a and system_b, and so on. Most devices still use a singular slot system, so unless you have a pixel or essential phone, you would flash the normal O build. Also, the steps on how to flashing back to stock are usually device specific, but you should be able to restore your stock O build by just reflashing the stock system.IMG from your device and wiping in fastboot.
IH8TouchWiz said:
A/B refers to the new partitioning system on the Pixel and Essential devices. It has one active slot and a backup slot for all parts of the system, so you'll have a boot_a and boot_b, system_a and system_b, and so on. Most devices still use a singular slot system, so unless you have a pixel or essential phone, you would flash the normal O build. Also, the steps on how to flashing back to stock are usually device specific, but you should be able to restore your stock O build by just reflashing the stock system.IMG from your device and wiping in fastboot.
Click to expand...
Click to collapse
Oh, thank you for explaining that to me! I have a Mate 9 and I seem to enjoy living on the bleeding edge, at the same time I'm dependent on WiFi tethering for my net. So may try it and see how it works at least. Would love to see if we get any opportunities to fiddle with the camera processing and GPS subsystems, as those are my hobbies.
Swan Princess said:
Wonderful work you're doing here! Would you mind explaining what is the A/B only versions? What do those letters mean? Are there means of reverting back from your experimental build to stock Oreo?
Click to expand...
Click to collapse
Well A/B is the new partitioning scheme where all firmware partition exist twice, and the bootloader switches from one to the other when updating. This is also called seamless updates.
To revert back to stock... Well flash stock?
interesting project, I've a question..are there any chance to run this project on device like P8 Lite 2015 (Kirin620) and P8 Lite 2017 (kirin655) since both are arm64? and also System A/B must be enabled on that device? thanks in advance
haky 86 said:
interesting project, I've a question..are there any chance to run this project on device like P8 Lite 2015 (Kirin620) and P8 Lite 2017 (kirin655) since both are arm64? and also System A/B must be enabled on that device? thanks in advance
Click to expand...
Click to collapse
Unless they are officially updated to Oreo and supports Treble (very unlikely), then no.
PresidentMcCain said:
Unless they are officially updated to Oreo and supports Treble (very unlikely), then no.
Click to expand...
Click to collapse
Only P8 Lite 2017 will get Android Oreo soon reported by many websites, but not sure if can handle Treble project.
I can try Port for Mido (Redmi Note 4/X)?
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
The goal of this ROM is to provide maximum hardware compatibility inside a Generic System Image.
No feature will be added. This will ease forward porting to new Android versions, which is the very goal of Project Treble
My hope is that other ROM developers will use this ROM as a basis to construct more advanced ROM.
How to flash:
Follow instructions available at https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
What doesn't work:
- NFC on some devices
- Front camera on Razer Phone
- Stock AOSP camera app on some devices. Please use OpenCamera app
- many graphic glitches on Moto E5
What works:
- Pretty much everything else
Tested devices:
- Samsung Galaxy S9+ Exynos
- OnePlus 6
- Blackview A20
- Koolnee Rainbow
- Cubot X18 Plus
- Pixel 2 XL (running Android 8.1 vendor)
- Lenovo Moto E5
- Allview V3 Viper
- Razer phone
- Huawei View 10
- Huawei Mate 9
This is an experimentation, this means that I'm mostly interested in bugreports.
But, I don't want too many reports, so please:
- If you use a community Treble, ASK YOUR TREBLE DEV FIRST (then they can come ask me here)
- I want bugs only about hardware features, not software bugs
- A bug without a device name doesn't exist
- A bug without a log doesn't exist
Downloads are available at https://github.com/phhusson/treble_experimentations/releases/tag/v119
ChangeLog:
v113 (2019-05-07):
- May security patch
- various fixes for Xiaomi Mi 9
v111 (2019-03-06):
- March Android security patch
- Fix MT6739 incoming SMS and mobile data connection
- Fix audio glitches on sakura
- Added overlay for:
- Asus Zenfone L1
- Lenovo S5
- HTC U12+
- Fix low brightness issue on Realme 2 Pro (Thanks @SamarV-121)
- Fix sound on Motorola james, pettyl, evert, jeter, aljeter
- Fix device will boot only few times on A/B devices running Pie vendor
- Fix boot on some Moto devices running Pie vendor
- Refix in-call mute on Huawei devices
- Disable fingerprint as a key on Xiaomi sakura
- Fix some graphical glitches on some low-end Snapdragon devices
v109 (2019-01-08):
- January security patch
- Fix RIL on Exynos 7870 devices
- Possibly fix NFC on some Huawei devices
- Fix sound on some Lenovo Moto devices
- Fix flashlight on Huawei Y6 2018
- Fix backlight on Xperia XZ1
- Fix audio jack on LG V40
- Fix quick settings position on "low end" screens
- Fix notch, auto backlight, ... for various devices
v108 (2018-12-05):
- Fix broken UI on Snapdragon 425, 430, 435
- Fix bootanimation for some Mediatek devices
- Some fixes for some Samsung devices (J6/A6 and alikes. It's still very unstable)
- Support IA key on Xiaomi Mi Mix 3
- Fix fingerprint pressing a button on Xiaomi Mi Mix 3, Xiaomi Mi 8 Lite, Xiaomi Mi A2
- Fix brightness on Xiaomi Mi 8 Lite, Xiaomi Redmi Note 5, Xiaomi Redmi Note 4X, Xiaomi Mi Max 3,
- Fix the hide notch option
- Add a new variant for devices running 32bits Android, but 64bits binder (if the kernel is 64bits, or this is a Pie-originated device)
- Fix weird/ugly sound on Xiaomi Mi Mix 3
- Fix boot on some Huawei devices
- Fix flashlight on Huawei devices
- Fix boot/instability on Qualcomm Android 8.0 vendors
- Fix USSD on Huawei devices
- Fix in-call mute on Huawei devices
- Support notch on Xiaomi Mi 8 Lite
- Fix stereo not enabled on reboot on Samsung Galaxy S/Note 9/+
- Adjust Xiaomi Mi 8SE statusbar and rounded corners
- Fix OnePlus6 overlay
- December security patch
v107 (2018-11-09):
- If you like this release, you can donate: https://www.paypal.me/phhusson
- Stereo on Samsung Galaxy S9/Note9 (enable it in the Treble Settings)
- Improve performance of Pie recent apps on Galaxy S9/Galaxy Note9/Huawei P20 Lite
- Fix S-Pen rotation on Galaxy Note 9
- November security patch
- Fix boot on some Android 8.0 vendors
- Fix passphrase on Hotspot
- Fix fingerprint triggering key event on various Xiaomi
- Fix fingerprint gestures on Huawei
- Overlays (auto brightness and power profiles) for many devices)
v105 (2018-09-19):
- Fix hotspot (for some devices?)
- Fix NFC for some devices
- [Samsung] Disable some pre-installed malwares
- [Samsung] Support glove mode
- [Samsung] Fix some screen-sleep related issues (like dead touchscreen on suspend, or not working hard click button)
- [OP6/OP3T] Double tap to wake
- [Xiaomi] Fix distorted sound
- [Moto G6] Fix distorted sound
- gapps variant is back!
- Fix incall audio on qualcomm P vendor devices
- Fix boot on some community treble devices
- [Xiaomi some devices] Disable fingerprint button
- [Mediatek MT6750] Fix boot/crashing UI
- [SDM660 8.0] Fix camera
- [Huawei P20/Pro] Support notch
- [Redmi 6 Pro Indian edition] Support notch
v104 (2018-09-05):
- September security patch
- [Samsung Galaxy Note 9] Fix WiFi, brightness and fingerprint sensor
- [Samsung Galaxy S9] Support assistant and partial "home" button on S9
- Include phh su
- [Xiaomi Mi 6X] Fix backlight control on
- [Xiaomi ...] Fix sound on Mi 8 *, Poco,
- [Xiaomi Mi Mix 2S] Delete fingerprint key event
- [Treble app] [Huawei] Setting for hwcomposer overlay bypass option to workaround blur issue
- [Treble app] minor fixes
- Add support for status bar reduction for notches
- Fix webview issue when not using gapps
- Huawei RROs (automatic backlight, battery infos, ...) (Thanks @Dil3mm4)
- [Known regression of this version] Broke ro.sf.hwrotation (needed for screen rotation on some devices)
v103 (2018-08-29):
- New Treble app. Look for it in the Settings
- Fix incoming calls on MTK
- Fix MTK RIL vendor 8.0
- Fix brightness on Mi Pad 4
- Fix dark mode for some devices
- Fix brightness for Note 9 and Japanese S9
- Fix status bar height for Pocophone F1's notch
v102 (2018-08-22):
- Fix boot on some MTK devices
- Fix boot on some Huawei devices
- Fix boot on some community-ported devices
- Fix screen rotation on some devices
- Fix WiFi and fingerprint sensor on various devices
- Fix S9 dead-touchscreen-on-resume issue
See current bug bounties at https://www.reddit.com/r/PhhTreble/comments/aioloo/bug_bounties/
Communication channels:
Reddit: https://www.reddit.com/r/PhhTreble/
Telegram: https://t.me/phhtreble
Thanks.
Been using it for more than 24hrs on a Razer Phone. Battery seems slightly better than in stock MR1, cameras do work except for the frontal one. Everything else, excluding the exceptions mentioned in OP, works perfectly, snappy and at full 120hz.
This is some daily driver material
Amazing!
Thanks a lot as always ! Love your work !!!
I have it booting. Which gapps did you use?
linuxct said:
Been using it for more than 24hrs on a Razer Phone. Battery seems slightly better than in stock MR1, cameras do work except for the frontal one. Everything else, excluding the exceptions mentioned in OP, works perfectly, snappy and at full 120hz.
This is some daily driver material
Click to expand...
Click to collapse
Great work Pierre ! Keep it up dude.
found the "*" same builds without the "nosu" tag. posted on a mirror site around same time as the ones on github. Any chance they are @phhusson builds too?
EDIT:
OK there is now a readme.md on the site claiming they are phhusson builds.
Happy to see your Pie AOSP Thread here bro..
Tested on MiPad4 :
- Bluetooth seems OK
- screen rotation OK after enabling it
- Wifi doesn't turn on
There are regular errors :
Code:
08-21 06:05:06.004 2267 2267 W ServiceManagement: Waited one second for [email protected]::IBootControl/default. Waiting another...
08-21 06:05:08.337 3597 3597 F linker : CANNOT LINK EXECUTABLE "/vendor/bin/hw/[email protected]": library "[email protected]" not found
I also see "LightsService: Light requested not available on this device. 2" sometimes, but I don't know if it's an issue.
Camera has issues, but I didn't test it with the 8.1 image, so perhaps they aren't linked with 9.0.
Here is what I get with the stock camera app :
- Back camera is OK for preview and video recording, but takes rotated pictures.
- Front camera is OK for preview, but as soon as i start recording the framerate lowers, colors are washed out, and there is a quite aggressive smoothing. I stays the same after stopping the record, then going out and back in the app restores the original preview behavior. Pictures are also rotated.
Also, same build.prop related issues as 8.1 build :
- backlight "blinking"
- bad DPI : 480 instead of 320
- seen as phone
Bluetooth for audio works on android9.0?
Bootloop on Huawei P10, vendor 8.0
Maybe I'm missing something.
Booted fine on Sharp Aquos S2 (SS2) with 8.0 vendor. I'll do some testing later and provide an update.
The instructions link (https://www.xda-developers.com/flash-generic-system-image-project-treble-device/) doesn't work. 404.
oh yes finally GSI is ready
let me first test it in arm device
Thanks
Can anyone tell me what the patches.zip file is and do we need to flash after gsi?
CANNOT LINK EXECUTABLE "/system/bin/sh": library "/vendor/lib/libshim_camera.so" needed or dlopened by "/system/bin/sh" is not accessible for the namespace "(default)"
sadly i get this
device : Redmi 2 ( wt88047)
8.1 vendor
：天使：正在下载我感觉应该不错
mod edit - translation added according to Forum Rules
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Click to expand...
Click to collapse
-=-=-
:Angel: I am downloading, I feel it should be good.
-=-=- @LingiMao
fivearcosstheeye said:
I have it booting. Which gapps did you use?
Click to expand...
Click to collapse
BITGapps.
After flash .img file:bootloop and in twrp system mount fail
Device:galaxy S9+
Xiaomi Mi 9
[Cepheus]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are NOT risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
I. Official Firmwares
II. EU and China Firmwares
III. Guide for Bootloader Status, Drivers, and Rooting
IV. Removing Bloatwares in Locked Bootloader
Stable Firmware
GLOBAL
10.2.9.0 PFAMIXM
10.2.6.0 PFAMIXM
10.2.3.0 PFAMIXM
EU (EEA)
10.2.22.0 PFAEUXM
10.2.17.0 PFAEUXM
10.2.15.0 PFAEUXM
10.2.12.0 PFAEUXM
10.2.24.0 PFAEUXM
10.2.26.0
11.0.6.0
CHINA
10.2.16.0 PFACNXM
10.2.15.0 PFACNXM
10.2.11.0 PFACNXM
10.2.5.0. PFACNXM
10.2.25.0.PFACNXM
MIUI 11 11.0.20
MIUI 11 11.0.3.0
11.0.2.0 OTA 11.0.3.0
Global Beta Firmware
9.4.2 Recovery
9.3.22 Recovery
9.3.7 Recovery
9.3.1 Recovery
9.5.9 Recovery
9.5.16
9.5.23
China Beta Firmware
9.4.1 Recovery
9.3.22 Recovery
9.3.14 Recovery
9.5.1
9.4.18
9.9.3
MIUI 11 9.9.24
MIUI 11 9.9.25
MIUI 11 9.9.26
MIUI 11 9.10.9
MIUI 11 9.10.16
MIUI 11 9.10.17
MIUI 11 9.12.27
EU Firmware
Stable Firmware
10.2.16.0
Beta Firmware
9.4.18
9.4.11
9.4.1
9.3.28
9.3.21
9.3.1
9.4.25
9.4.26
9.5.1
9.5.9
9.5.16
9.5.23
9.5.30
9.6.5
9.6.20
9.6.27
9.7.4
9.7.11
9.7.19
9.17.22
9.8.1
9.8.8
9.8.9
9.8.22
9.8.29
9.9.3
9.9.6
MIUI 11 EU
9.9.26
9.10.10
9.11.7
9.11.22
9.11.28
9.11.5
9.12.12
Mi-Room
9.4.11
9.4.18
9.4.25
9.5.9
9.5.16
9.6.20
9.6.27
9.7.4
9.8.1
Revolution OS
9.5.1
9.5.29
9.6.23
9.9.7
9.9.21
9.11.21
malchik-solnce
9.4.18
9.4.30 - NEW
Disable File Encryption
DFE
Drivers
Minimal ADB and Fastboot
ADB/Fastboot tools - Recommended
USB Drivers
Bootloader Status
Type the commands using ADB
fastboot devices
fastboot oem device-info
If fastboot issues Device unlocked: true - the bootloader is unlocked
If fastboot issues Device unlocked: false - the bootloader is locked
TWRP Recovery
TWRP 3.2.3-10
TWRP 3.2.3-6 test
Twrp 3.2.3 by mauronofrio
Root
Magisk
Google Pay Fix
Install PrebuiltGmsCore and flash Google pay Patchfix (Android 9 only)
Stock Kernel
Stock Kernel img
Switch between Global Stable (MI, EEA / EU, RU)
-Locked or Unlocked Bootloader try this XiaoMiTool V2 Project
Removing Bloatwares in Locked Bootloader
-Enable Developer Options and click USB debugging
1.Open and click run as administrator XiaomiADBfastboottools.exe
2.Click Debloater
3.Check your phone (Allow)
4.Select the system apps that want you to delete
5. Wait for the process....
6.After finished.. click the Reboot into System
Donation for a coffee
Donation for a coffee
Donation for a coffee
Android Q 9.8.8 [Cepheus]
Android Q 9.8.8
Changelog
Download
Android Q Beta 3
Downloads:
Xiaomi Mi 9 Android Q firmware
MIUI ROM Flashing Tool
Mi PC suite
Installation
Option 1
1.Download Mi PC Suite and open
2.Put Mi 9 in Fastboot mode connect the phone to your PC, and select the firmware.
Option 2
1.Turn off your Mi 9.
2.Press and hold the Volume Down and Power buttons to enter Fastboot mode.
3.Connect the Mi 9 to your PC.
4.Double-click the downloaded firmware to decompress it.
5.Open the file folder for the decompressed firmware and copy its path on the PC.
6.Once the MIUI ROM Flashing Tool is installed, open MiFlash.exe and paste it into the address bar the firmware file folder path copied in the previous step.
7.Click the first button (circled out in yellow) to refresh.
8.Click the second button (circled out in red) to flash the firmware to your Mi 9.
Bugs:
Alarm does not ring when the device is switched off.
Device restarts after user selects wireless projection device in the Wireless display.
Settings app stops running after user deactivates shortcut to mute device.
Settings app stops running when Gesture is selected in Settings.
File app stops running after refresh.
Unable to switch screen color in Settings.
Unable to add a fingerprint
Viper4Android + DDPlus
Viper4android + DDPlus =
*Extreme Caution
1.Install Audio Modification Library (AML) and Audio Compatible Patch (ACP) via Magisk Repo and reboot.
2.Install DDPlus via Magisk and reboot.
3.Install Viper4Android via Magisk Repo (install as system app) and reboot. (materialized).
4.selinux changer (choose permissive if not working in enforcing).
5.Profiles
DDPlus
Profiles 1
Profiles 2
*Put profiles in Viper4Android folder
*after choosing profile close and open Viper4android turn on turn off the master power and close viper4android (check if Driver Status (Enabled: YES)
Another one
great efforts ? much love
Rooting Xiaomi devices doesn't void their warranty, just to let you know.
Hello,
you propose a version 3.2.3-10 of TWRP.
I had not seen it in any of mi9's root posts. It is suitable for this smartphone?
Flash latest Magisk and You have rooted Mi9.
Wysłane z mojego MI 9 przy użyciu Tapatalka
MIUI 10 10.2.9.0 Android Pie 9.0 is up!
Changelog
Camera
New: Introducing Macro mode
Optimization: Ultra wide angle mode changed to 0.6X Ultra wide angle zoom
Optimization: Brightness adjustments for human faces in third party apps
Optimization: Image quality for photos and videos
Fix: Photo previews for individual shots weren't displayed in some cases
Settings
Fix: Screen brightness was lowered in the Dark mode whenever audio volume was adjusted
Fix: Fingerprint scanner couldn't be used when TalkBack was on.
Malchik-Solnce ROM
MIUI 10 9.4.18 Android Pie 9.0
Changelog
New
- screen time
- wallpaper slideshow
- AI 3.0 in camera (Mi8, test)
- icons of unimportant notifications
- new font size settings
- dynamic photo mode (Mi8, Mi9)
- a full-fledged GameTurbo mode
- settings for color names in the call log
- custom camera watermark (Mi8)
- new charging animation on the lock screen
- choosing the background color in hours (auto, light or dark)
- disabling search by gesture up (desktop settings)
Optimization
- updated Magisk 19. 0
- translations updated to 9.4.18
- updated music app
- select region in settings (Note 5, Mi9)
Corrections
- fixes known bugs
- fixed Wi-Fi status check bug
- fixed crash when editing photos (portrait effects)
- fixed Turbo Game mode (clear plug-in data security)
Bugs
- error 7 (clean the cust (root / cust) folder before flashing)
- cannot wind the system (mount it before the firmware with your hands)
- Google Pay does not work but we have work around fix..
Important Information
The list of changes may vary depending
on the version of Androi d, device or interface language.
Install firmware only through TWRP.
Remove Magisk: META-INF \ com \ miui \ magisk.
Revolution OS 9.5.1 Android Pie 9.0 is up!
Changelog
The System
the New - Base updated to 9.4.11
the New - Added of low brightness By DC attenuation function (MI9)
the Optimize - Updated the the Google security patch (2019 # 3) to Improve system security
the Optimize - Optimization of the speaker's stereo effects
the New - the New not boot animation for the the MIX range (the word the MIX Comes out under Revolution OS)
the Optimize - Updated Youtube vanced, microg, the Google Keyboard and the WebView the Google
Desk is
Fix - Optimized the experience of setting a password the when using the a transparent a wallpaper
the Settings
the Optimize - Optimized display of the accessibility display list (MiMIX2S)
Optimize - Viewing the grouping of the homepage optimized
Optimize - Optimize the display of the list display accessibility
Optimize the screening of the
screen.
Click here to view the
security page
.
The Optimize - the optimize the style of the red • envelope wizard request window the below the horizontal screen
Fix - repairing the risk copy-DURING the virus scan process will of the restart the scan
Camera
the New - the Activated 18: 6 (full screen in the camera
Lock screen
the New - Charge screen for all devices
Fix - Problems that a double bar was generated when no notifications
Fix it is a fissure
fix it
? , the charging ball does not Disappear
Fix - Fix the problem That the notification bar of the lock screen is abnormal the when unlocking in the the status of the screen
the Optimize - the Optimize the the GPS the status bar display icon
the Optimize - the optimize the user interface and the experience of changing the name of fingerprints.
Optimize - optimize the quick copy of the "require password once every 72 hours" function
Fix it
after you use your fingerprint.
Fix it for a moment.
There is no problem for you to fix the cable
.
It is not necessary to
update the problem.
Fix - fixes the drop-down notification bar of the lock screen, charging the ball does not Disappear
Fix - minor notifications are not solved, But IT Shows a problem with the entry "Not by important notifications"
Fix - the fix the problem That the 24- hour dynamic video display style does not show the background image
Fix - correct the bottom of the lock screen when applying a third-party theme shows a messy problem
Landscape Mode
Fix - Blinks when the screen is turned (Mi 9, Mi 8 Pro).
Fullscreen
the New - fullscreen mode Improvements on devices with as with the Water Water Drop of Notch (Mi 9, redmi Note7)
Clock
the New - added the Possibility freely to the select Communities white or a black background Used in the clock configuration
The Optimize - the background Used color of the watch the after the this the update is Communities white
the Network Assistant
Fix - the fix the problem That the operation saves as with the invalid the after setting the OF THE SAME quota in the package
Album
the Optimize - the Optimize the Removal of the SLOW album
the Optimize - the Optimize SLOW loading of album Pages
Optimize - Optimize the album thumbnail by loading a slow problem
FaceID
Fix - In some cases, the message Didn't disappear.
Blocking the Application
Fix - Fix some error of models The visualization of the input the box of the application password blocking
the Game tools
the Optimize - Fully updated, support to block blocking device, the SIM cards, the apps, for Among: others.
Optimize - Added desktop shortcut function for game acceleration.
Optimize - optimizes how to activate the game's acceleration mode.
Fix - the fix the game to? Answer the speaker, the duration of the call Shows the wrong question
Fix - the correction of the fast travel network A to Accelerate the incoming directory the click is not sensitive
the Optimize - the new version of the game accelerates the home page and the The style of the interface is completely new.
The Optimize - the game's toolkit The is fully up closeup to date, Supports information screen lock, network A card with one's-the click switch statement and OTHER functions The
Other optimizations and adjustments
Fix - the problem of the user interface of the height of the button AT the bottom of the interface guide is not uniform.
MIUI 10 EU 9.4.25 Android Pie 9.0 is up!
CHANGELOG 9.4.25
System
Optimize - Update Android security patches for some devices
Lock screen, status bar, notification bar
Optimize - Add lock screen resident notification in the do not disturb state
Fix - Fixed an issue where Talkback mode was not charging but prompted "fast charging"
Fix - Fix the problem that still occurs in special cases after the screen is closed.
Camera
Fix - Fix the filter's occasional darkening problem
Fix - Fix filter occasional mosaic problem
Fix - Fix the pre-shooting mirror watermark flattening problem
Fix - Fix the switch mode when fixing the front photo square, return to the problem that the photo does not remember the square
Network assistant
Fix - Fix the problem that the traffic ranking is stopped and stops running.
Hi, can I use the xiaomi adb tool to unlock bootloader?
madsponge26 said:
MIUI 10 10.2.9.0 Android Pie 9.0 is up!
Click to expand...
Click to collapse
Should this be flashed from TWRP or from fastboot using MiFlash?
Thank you!
MIUI EU 9.4.26 Android Pie 9.0 is up!
Changelog
Optimized System Performance
Improve System and Security Stability
Mi - Room 9.4.25 is up!
Official changes:
Security patch update for some devices.
Updated low battery warning.
Added notification on the lock screen about the active Do Not Disturb mode.
Bug fixes, system optimization.
Changes from the MiRum team:
Added support for the Xiaomi Mi6 device based on Android 9.
Added separate volume for calls and notifications (thanks to MiuiPro).
Dialer style selection returned (Phone> Menu> Advanced> Dialer View).
Fixed dialer in dark mode.
Fixed the background of the input field in the notification panel in dark mode.
Completion and improvement of existing patches and translation.
Fixed the “Voice Match” function for Mi8.
Added 10.2.24.0 EEA..
Added MIUI 10 EU 9.5.1 Android Pie 9.0 is up!
Changelog
Hi, i'm on MIUI 10.2.24.0 STABLE (GLOBAL)
What twrp should i use, atm. there are 3 different versions available.
I want to use TWRP for nandroid backup (not working yet) and flash Magisk and maybe later other CAF or GSI roms.
9.4.30 malchik-solnce
Changelog
List of changes
New:
- screen time
- wallpaper slideshow
- dynamic photo mode (Mi8, Mi9)
- custom camera watermark (Mi8)
- select the background color in hours (auto, light or dark)
- some new features in the camera for Mi8 (frontal flash of the screen backlight, makeup, correction, etc.)
Optimization:
- updated translations to 9.4.30
- updated music application (data-app)
Corrections:
- corrections of known errors
- fixed clipping of a custom watermark ( Mi8)
Having Issue with Battery, Performance, Camera, Sound, or Signals/Network after installing Custom Rom, then this threat is perfect for you.
Your Phone must be ROOTED !!!!
Disclaimer - I am not responsible if anything wrong happens, you are doing it on your own Risk.
Battery -
Download the two Given Apps
L Speed - https://apkpure.com/l-speed-gaming-battery-saver-performance-root/com.paget96.lspeed/download
Easy DPI Changer - https://play.google.com/store/apps/details?id=com.chornerman.easydpichanger&hl=en_IN
Set L Speed Profiles to Balance Mode and
Set Resolution to 1080x2220 (FHD) or 1480x720(HD)
Performance -
If you want to increase +10-15 fps while playing games then follow the instructions.
1st - Flash Custom Kernel
By flashing custom kernel, there is high chances to increase performance of your device.
These are my recommendation,
For Lineage OS/AOSP based ROM use RZ Kernel.
For oneUI (9 above) based ROM use Phantom Kernel.
For samsung experience (7.1.1-8.1) based ROM use Zceed Kernel.
RZ Kernel - https://forum.xda-developers.com/ga...rnel-rz-kernel-samsung-galaxy-note-8-t3916568
Phantom Kernel - https://forum.xda-developers.com/ga...nt/kernel-phantom-kernel-n950-f-fd-n-t3825268
Xceed Kernel - https://forum.xda-developers.com/galaxy-note-8/development/kernel-xceed-t3728594
2nd - Tweaking Kernel
Download this app
Mtweak - https://androidfilehost.com/?fid=4349826312261770830
This app enable us to control over the kernel which we flashed on our device.
If you don't care about battery life then follow this steps.
1) Must Flash BusyBox and Root Manager.
2) Give Root Access to Mtweaks
3) go to CPU option
4) set CPU Governor to Performance and enable Apply to Boot
5) go to GPU option
6) set GPU Governor to Booster and enable Apply to Boot
Camera -
GCAM for NOTE 8 - https://forum.xda-developers.com/galaxy-note-8/themes/google-camera-hdr-portrait-t3730325
Flash Camera2API using any Custom Recovery [Not Compulsory]
Camera2API - https://www.cyanogenmods.org/downloads/camera2-api-enabler-zip-file-download/
Sound -
The port which I am going to give will improve your device Sound Quality Dramatically.
Choose any one Part. (Both Part works absolutely fine)
Part I
Dolby for Q - https://drive.google.com/file/d/1-4fI3JSIdFoHJQ2PUHFxQiHumOGYszCs/view (All Four)
OR
Part II
ACDB-0.47 - https://drive.google.com/file/d/1SGO_y4kpeO7wGFMkvJgVUWHP9iTw95Bc/view
Dolby-Atmos-RC4-ACDB - https://drive.google.com/file/d/1Z5G6KJpP-93dI2MlgebSSVvpU4LbxtUB/view
Flash these Modules using Magisk Manager.
You can feather improve using ViPER4Android FX
https://magiskroot.net/viper4android-fx/
If you want Dual Speaker functionality.
XDA Forum - https://forum.xda-developers.com/galaxy-note-8/themes/dual-speakers-samsung-galaxy-note-8-t4110799
Follow the instructions and you're good to go.
If still unable to follow, here is the Link for
YouTube video - https://youtu.be/k0eLNnazoGo
Signal/Network -
Go to Access Point Names(APN), Create a New APN and Fill the give Information
Name - AnyName
APN - portalnmms
APN type - **LEAVE IT BLANK**
APN protocol - IPv4/IPv6
APN roaming protocol - IPv4/IPv6
Bearer - Uncheck Unspecified and Check LTE to GPRS
Save the API, wait for 5 min and you might see some Improvement.
Fast Charging -
Force Fast Charge - https://forum.xda-developers.com/re...isk-force-fast-charge-emperoreye1993-t3804901
Flash it using Magisk.
Can’t say it has a full fix but bring bit improvements to it.
Test on Lineage OS 16, Lineage OS17.1, Pixel Experience Plus, Evolution X 2.4, Evolution X 4.3, crDroid, HavocOS 2.x, and some AOSP based ROMs.
You can also use these Tweaks on any ONE UI Rom like Hades Rom.
Follow the Steps Systematically.
And If any Query You can Reply or DM me on Instagram - adygreg
Youtube Channel - https://www.youtube.com/channel/UCfgOffADDHCh7dOxUeB4NRQ
AdyGreg said:
Having Issue with Battery, Performance, Camera, Sound, or Signals/Network after installing Custom Rom, then this threat is perfect for you.
Your Phone must be ROOTED !!!
Disclaimer - I am not responsible if anything wrong happens, you are doing it on your own Risk.
Battery -
Download the two Given Apps
L Speed - https://apkpure.com/l-speed-gaming-battery-saver-performance-root/com.paget96.lspeed/download
Easy DPI Changer - https://play.google.com/store/apps/details?id=com.chornerman.easydpichanger&hl=en_IN
Set L Speed Profiles to Balance Mode and
Set Resolution to 1080x2220 (FHD) or 1480x720(HD)
Performance -
Flash RZ Kernel using any Custom Recovery (Might Help you with Signal Issue)
RZ Kernel - https://forum.xda-developers.com/ga...rnel-rz-kernel-samsung-galaxy-note-8-t3916568
Camera -
GCAM for NOTE 8 - https://forum.xda-developers.com/galaxy-note-8/themes/google-camera-hdr-portrait-t3730325
Flash Camera2API using any Custom Recovery [Not Compulsory]
Camera2API - https://www.cyanogenmods.org/downloads/camera2-api-enabler-zip-file-download/
Sound (NEW) -
The port which I am going to give will improve your device Sound Quality Dramatically.
Download - https://drive.google.com/file/d/1-4fI3JSIdFoHJQ2PUHFxQiHumOGYszCs/view (All Four)
Flash these Modules using Magisk Manager.
You can feather improve using ViPER4Android FX Available in Magisk Manager
Signal/Network -
Go to Access Point Names(APN), Create a New APN and Fill the give Information
Name - AnyName
APN - portalnmms
APN type - **LEAVE IT BLANK**
APN protocol - IPv4/IPv6
APN roaming protocol - IPv4/IPv6
Bearer - Uncheck Unspecified and Check LTE to GPRS
Save the API, wait for 5 min and you might see some Improvement.
Test on Lineage OS 16, Lineage OS17.1, Pixel Experience Plus, Evolution X 2.4, Evolution X 4.3, crDroid, HavocOS 2.x, and some AOSP based ROMs.
You can also use these Tweaks on any ONE UI Rom like Hades Rom.
Follow the Steps Systematically.
And If any Query You can Reply or DM me on Instagram - @AdyGreg
Click to expand...
Click to collapse
Thank you sir . It fixed my internet speed issue.
Sound
Nice one.
Can you make dual speakers mod flashable with twrp for roms that has single speaker.
Also if i want to improve sound quality in hadesrom, is it possible? Since hadesrom already have dolby.
Feeling more best audio .. thank sir..
Anx Camera for custom ROMs [ DEPRECATED ]
PS: Use Mi camera new port from second post.
Android 12 & 12L
Download:
- v7.0
Android 13
Download:
- v7.1 ( working on Pixel Os except 48MP)
- v7.2 ( working on many roms )
1. Flash miui camera magisk module.
2. Reboot.
3. Enable Permissions in App Info if launching the app at first does not ask for any permission (Camera, Files, Location, Microphone).
Changelogs:
09.09.2022
• Fixed slow motion along with 48MP mode.
• Fixed Portrait mode + filters along with wide/uw/macro lens.
• Enabled documents, Night, short video, time-laps, long exposure and clone modes.
• Enabled and edited watermark as "SHOT ON REDMI NOTE 10 AI QUAD CAMERA".
18.09.2022
• Fixed portrait again on some Roms.
• Fixed HDR mode on back camera.
• Fixed broken zoom ( green screen ).
17.10.2022
• Upgraded to v7.2 and dropped A12 builds.
• Fixed 48MP on A13 ( thanks to @Anush02198 for help).
• Fixed front portrait.
• Removed front slow motion button ( was causing crashes ).
• Removed scanner miui app and fixed Document option.
AEonAX link
AnxCamera wiki
Thanks to:
AEonAX, SonalSingh18 and AMRGAMAL1
New Mi Camera port [ magisk module]
Version 4.3
Build date : 18-11-2022
For mojito A13 Custom Roms
Mi Camera magisk module:
➥ Download [Gdrive]
Instructions:
• Delete any anx / miui camera magisk modules if there is already.
• Flash via magisk manager Mi Camera magisk module and reboot to system.
• If necessary, flash 48MP fix magisk module according to android security patch then reboot to system ( uninstall 48MP fix if you get "can't connect to camera").
48MP fix for android 13 magisk module (November 2022 security patch and previous):
➥ Download [Gdrive]
48MP fix for android 13 magisk module (+December 2022 security patch):
➥ Download [Mega]
48MP fix for android 12 magisk module:
➥ Download [Gdrive]
Changelog:
• Optimized for mojito.
• Added necessary vendor libraries.
• Unnecessary codes removed.
• Experimental features unlocked.
• Enabled Night, 48MP, Short video, Panorama, Documents, VLOG, Time-Laps, Slow motion, Movie Effects, Ai Watermark, Custom Watermark, Clone modes..
15-12-2022
• added new 48MP fix for December security patch.
29-12-2022
• Removed parallel processing from experimental features.
• Switched to platform keys.
• Fixed few sepolicy rules.
11-06-2023
• Fixed timed burst in pro mode.
• Fixed back portrait in some ROMs.
• Removed experimental features and its annoying message.
• Switched to original mi camera icon.
• Added monet support (only in camera settings for now).
• Fixed parallel-processing on Android 13 (by ceracz)
• Set default HDR mode to Auto (by ceracz).
• Dropped stock camera provider (by ceracz), so no need to 48MP fix.
19-06-2023
• Fixed blur in background on portrait mode.
Notes:
• ROMs builders should add this commit, to fix front camera & portrait issues if it is not included in rom source: https://github.com/SpiceOS/android_bionic/commit/e1b0c860ea4dfc74cf9c016812b0d3aea315b1d0
• For those who want include Mi Camera on their builds, use this repo, this commit and this commit.
• To fix 48mp from source add this commit:
https://review.lineageos.org/q/topic:twelve-camera-privapp
• Don't use spoofing module like Dolby Atmos or Pixel props .. Otherwise they will affect camera functionallies.
Thanks to:
AmrGamal, Ceracz ,Praditia Nur, Anush,
Anx team and all testers.
Do you have MIUI gallery?
ibanezred16 said:
Do you have MIUI gallery?
Click to expand...
Click to collapse
This apk worked for me:
Google Drive - Download warning
drive.google.com
Disable Force Encryption for
Mojito / oss vendor :
Usage:
1- Comming from encrypted rom
- Flash the new encrypted ROM
- Flash ofox
- Reboot to ofox
- Flash decrypt zip
- Format data
- Reboot system
2- Comming from decrypted rom
- Wipe data/dalvik/cache
- Flash the new encrypted ROM
- Flash ofox
- Reboot to ofox
- Flash decrypt zip
- Reboot system
Notes:
• This zip decrypt your data.
• This zip won't decrypt data on stock vendor.
• This zip won't decrypt data on erofs Roms.
• Flash it everytime after flashing new rom.
• Decrypted DATA = LESS SECURE device.
Working Fm radio as magisk module:
For A12 and A13 (most latest a13 roms don't have FM radio app).
- Flash the module via magisk
- Reboot to system
Increase sawp (ZRAM) from 2Gb to 4Gb
installation:
- Go to ofox recovery
- Flash attached zip
- Reboot to system
Ps:
Some roms have limited vendor partition size and RO, so they don't accept fstab.zram file modification or decryption.
Don't flash this zip on Roms having Neternels kernel as it has by default 4gb vbswap.
KProfiles modes (only for neternels kernel) :
Switch between battery , balanced and performance modes (manual or auto) using KProfiles app ( settings / battery / or using qs tile ).
- Flash Kprofiles magisk module.
- Reboot.
- Tested and worked on many a12L/a13 roms.
Ps:
It won't work on Roms using non-Neternels kernel.
Hami_Do said:
Working Fm radio as magisk module:
For A12 and A13 (most latest a13 roms don't have FM radio app).
- Flash the module via magisk
- Reboot to system
Click to expand...
Click to collapse
This is a great achievement. Weldone Hami_do
Hami_Do said:
• This zip won't decrypt data on stock vendor.
• This zip won't decrypt data on Roms having RO vendor.
• This zip won't decrypt data on erofs Roms.
• Flash it everytime after flashing new rom.
• Decrypted DATA = LESS SECURE device.
Click to expand...
Click to collapse
Unlike the classic method which decrypts data at vendor fstab level, the new method can decrypt data even on RO roms such as erofs roms.
Soon i will let you know how..
Edit:
Last time I have decrypted successfully Arrow Os A13 erofs (Read Only ROM) using dfe-neo from here :
[A/B][A-ONLY][SCRIPT][READ-ONLY][EROFS][ANDROID 10+] Universal Disable Force Encryption for RO and RW "NEO STABLE"
Disable Force Encryption NEO Do you all know what DFE is? no? Anyway. Basically, your device has an encrypted data section "/data" by default. Let's look at the advantages of google's solution that we will lose after disabling encryption: -...
forum.xda-developers.com
thanks for the miui camera port
All works great with both 12 and 13 beta.
Just had to disable some pixel props on magisk for the camera port to work flawlessly.
Thanks.
Has anyone tried the flashable anx camera on pixel os a12?
devcon69 said:
All works great with both 12 and 13 beta.
Just had to disable some pixel props on magisk for the camera port to work flawlessly.
Thanks.
Click to expand...
Click to collapse
Can you show which pixel props to disable?
Mthw said:
Has anyone tried the flashable anx camera on pixel os a12?
Click to expand...
Click to collapse
Since PixelOS uses read only filesystem (erofs) it might not even be possible to flash stuff there.
Anyone tested anxcamera for GSI a12L with wcsf kernel on their mojito devices?
pihpih95 said:
Anyone tested anxcamera for GSI a12L with wcsf kernel on their mojito devices?
Click to expand...
Click to collapse
Not with WCSF but tested on Neternels. Selfie and portrait mode crashes.
Samir2298 said:
Not with WCSF but tested on Neternels. Selfie and portrait mode crashes.
Click to expand...
Click to collapse
I see, thanks for the information i think i will try anxcam with WCSF later and report it back here
Mthw said:
Since PixelOS uses read only filesystem (erofs) it might not even be possible to flash stuff there.
Click to expand...
Click to collapse
Flashing files directly in system you can't on erofs i agree, but flashing magisk modules on erofs is possible , there is no problem.
----
@pihpih95 I think same issues on neternels you will find them on WCSF..
except if you want try it on a12 , try PLC version ( prebuilt libcameraservice ), because my anx a12 module has a prebuilt libcameraservice.
And if you want try WCSF on a13 , try NPLC because there is no libcameraservice in my anx a13 module.
Hami_Do said:
I think same issues on neternels you will find them on WCSF..
except if you want try it on a12 , try PLC version ( prebuilt libcameraservice ), because my anx a12 module has a prebuilt libcameraservice.
And if you want try WCSF on a13 , try NPLC because there is no libcameraservice in my anx a13 module.
Click to expand...
Click to collapse
i found that whenever i record the video , it is not save to any of my storage , how to overcome this problem ? im using WCSF-PLC latest on AncientOS GSI,taking picture just fine , im using port v7 anxcam