Related
Hello,
as I've read on the net, i9100 should be a dualband wifi device. 2.4 Ghz AND 5 Ghz ought to be supported.
I that true? Is someone actually using 5 Ghz-only mode or was that just marketing buzz?
greetings
No, it doesn´t connect to 5GHz WLAN
How could I control it ? I don't have anything related to it in my settings' panel ^^'
LightspeedGalaxy said:
No, it doesn´t connect to 5GHz WLAN
Click to expand...
Click to collapse
it does, i´m using it once in a while
sewe said:
it does, i´m using it once in a while
Click to expand...
Click to collapse
You are right! I just tried that, and it works just fine.
Thanks for your answers. But which one is correct?
Did you set your Wifi-AP to IEEE 802.11a which is 5Ghz or to 802.11n, which uses 2.4 AND 5 Ghz?
Please some more details. Right now the possibility for dualband is still just 66%
greetings
My case :
My house Router Setting - 2.4ghz band for Wireless G and 5ghz band for Wireless N... Both worked with my phone. But G on 2.4ghz more stable (most of the time 3bar or more), fot N on 5ghz sometime no network coverage.
My router : DLink Quadband DIR825
Sent from my GT-I9100 using XDA App
I'm using Apple's Time Capsule with both 5 Ghz N and 2.4 Ghz G and N.
As usual 5Ghz is faster but weaker in signal strength.
Yarymo said:
How could I control it ? I don't have anything related to it in my settings' panel ^^'
Click to expand...
Click to collapse
I tried to set my router to 5GHz mode, and it wouldn´t find the WLAN even if I´m standing next to the Router.
I only tried 802.11n, not 802.11a.
But as others said differently I may give it another try. My Firmware is still KE2, maybe the updated the WLAN-driver later?
I´d actually would like to be able to use 5GHz, as there are quite a few 2,4GHz WLANs next to me, so bandwidth isn´t always the best.
So, whats the case now? Are there several different Hardware/Softwarelayouts on the market or why are there these differences?
Can someone confirm that pure 5GHz wifi works or not, based on trial and error, and post his Firmware-details?
Greetings,
Fenrasa
EDIT:
i googled something VERY interesting:
[Firmware] I9100XXKG1 (Android 2.3.4) (05.07.2011) is supposed to be able to connect to 5GHz Wifis. Can someone try it out and confirm it?
Another poster to the thread wrote, that "KE2 and 7" ought to connect to 5GHz wifi as well.
SOURCE: --cant post link yet, need 8 posts ---
No people some ROM's supporting some NOT !!
Example: Stock Rom -supporting!
and LeoMar75 Rom Revolution
My EU device with KE7 ROM does connect to 5GHz on my WNDR3700 router. IIRC I had to make the SSID visible to make the original connection; once the connection was set up, I then reset the SSID to hidden.
Allright!
Samsung Galaxy S2 i9100 on I9100XXKE7 logged into my 5GHz Wifi. (Buildnummer GINGERBREAD.XWKE7)
Thank you all for your help!
Just a follow up question to this:
It appears the GS2 does have 5ghz support at least to some degree.
Is this 802.11a 5ghz, or 802.11n 5ghz, or both? And on a side-note, what's the fastest speed you've got it to negotiate with wifi? On my Galaxy S, even with 802.11n and 10 feet away from my router, I usually max out at 72 mbps.
It definitely supports 802.11n at 5 GHz, as that's how I connect to my home network. I have no idea how fast the link is -- never bothered to check.
Now that I'm at home, I just connected to my 5 GHz 802.11n, and the link speed reported by the SGS2 is 65 Mbps, the same speed I get connecting at 2.4 GHz. I'm sitting about 2 meters from my access point, and the 5 GHz signal strength is only "good", as opposed to "excellent" for the 2.4 GHz.
3waygeek said:
It definitely supports 802.11n at 5 GHz, as that's how I connect to my home network. I have no idea how fast the link is -- never bothered to check.
Now that I'm at home, I just connected to my 5 GHz 802.11n, and the link speed reported by the SGS2 is 65 Mbps, the same speed I get connecting at 2.4 GHz. I'm sitting about 2 meters from my access point, and the 5 GHz signal strength is only "good", as opposed to "excellent" for the 2.4 GHz.
Click to expand...
Click to collapse
Interesting, thanks 3waygeek! Glad to hear 5Ghz appears to work with 802.11n.
*Bump*
Anyone else have any experience/input?
5ghz works here too, speeds seem to be faster( not that they matter on real life conditions) but signal ill always be weaker for 5ghz as it doesn't penetrate walls and such as well as 2.4
Sent from Samsung Galaxy S2 on TELUS.
I am quite confused about the statements here regarding the signal ranges of a....n..
can somebody have a look at "http://en.wikipedia.org/wiki/IEEE_802.11" they give the largest ranges for ...n signals. The only thing I can confirm is that yes, I can connect to all: a... and ...n..
Well it may be useful to gather a collection of working/not working stats together to find the best rom/kernel/modem combos.
NOT working (5GHz network not detected, Time Capsule with separate named 5GHz channel, picked up fine by Macbook Pro):
ROM: VillainROM 2.4.2
Kernel: 2.6.35.11 ninphetamine 2.0.5, and also 2.1.3
Modem: XXKG6
ROM: LeoMar75 2.6 - XXKH3
Kernel: 2.6.35.11 ninphetamine 2.1.3
Modem: XXKH3
well, for those who can't connect to 5Ghz band, try to adjust channel setting on your router may solve the problem.
My S2 only supports 36-48 channels currently, and I can't find any region option in the setting menu.
BTW, yes, the 5Ghz signaling strength is not as good as 2.4Ghz. However, the trasmission rate (or efficiency) is much better than 2.4Ghz due to less interfere.
I noticed my WiFi signal isn't as strong as my original Epic was. Does this phone support wireless N?
Like explained in this thread?
http://forum.xda-developers.com/showthread.php?t=1158629
I tried N on my evo a while back and thought it sucked my battery down compare to G. My N network shows up fine on my 3D although I haven't tested it cause G is plenty fine for the 3D. Plus I get excellent battery life leaving wi-fi on G and don't really need the speed bump going to N. I don't think N will work on 5Ghz though. My ipad2 will see a 5Ghz N network but not my evo. So if your N is on 5Ghz it won't even show up in your list, at least it didn't for me.
I get between 65 and 72 mbps with my 3D on my 4G i was topping off at 54mbps.
That really is too bad... I thought I remembered having read somewhere that the 802.11 chipset in the 3D supported 5Ghz..? If that's the case I would be curious if a different firmware or driver might be able to enable use of the 5Ghz spectrum.
catejust said:
That really is too bad... I thought I remembered having read somewhere that the 802.11 chipset in the 3D supported 5Ghz..? If that's the case I would be curious if a different firmware or driver might be able to enable use of the 5Ghz spectrum.
Click to expand...
Click to collapse
My ipod touch 4th gen won't see a 5Ghz N network either. I ended up switching my N network back to 2.4 since hardly anything even sees a 5Ghz network.
The evo3d does support n but only on a 2.4ghz signal. Your router must be set to that signal in order to use it. It will not see 5ghz ssid. I average 78 to 94 mbps on wifi. Hope this helps.
Locked & Loaded
laie1472 said:
The evo3d does support n but only on a 2.4ghz signal. Your router must be set to that signal in order to use it. It will not see 5ghz ssid. I average 78 to 94 mbps on wifi. Hope this helps.
Locked & Loaded
Click to expand...
Click to collapse
I could be standing right next to the router and not get better than a 11 mbps rate when the cable service is 25 mbps (and the computer reaches that high). Why would that be? I looked in all the Linksys settings and cant see what could be changed.
qualitymove13 said:
I could be standing right next to the router and not get better than a 11 mbps rate when the cable service is 25 mbps (and the computer reaches that high). Why would that be? I looked in all the Linksys settings and cant see what could be changed.
Click to expand...
Click to collapse
Are you on a 2.5ghz n signal???
Locked & Loaded
I believe so. My routers settings page shows mixed mode b, g and n and all of the other settings seem to be set to auto.
I also toggled "best wi-fi performance" as well to see if there was a difference. None.
laie1472 said:
Are you on a 2.5ghz n signal???
Locked & Loaded
Click to expand...
Click to collapse
do you currently have a 802.11b device connected at the same time as the Evo 3D?
802.11n on the 2.4 side, might be talking slower because you have a slower device connected? (maybe an old iPhone, or old laptop or something?)
If that doesn't work, take off mixed mode, and set it only to n, or at least G and N.
Triumph said:
do you currently have a 802.11b device connected at the same time as the Evo 3D?
802.11n on the 2.4 side, might be talking slower because you have a slower device connected? (maybe an old iPhone, or old laptop or something?)
If that doesn't work, take off mixed mode, and set it only to n, or at least G and N.
Click to expand...
Click to collapse
Anything else that is connected is either G or N. The router settings dont allow mixed n/g only b/g, figures...
Overstew said:
I noticed my WiFi signal isn't as strong as my original Epic was. Does this phone support wireless N?
Like explained in this thread?
http://forum.xda-developers.com/showthread.php?t=1158629
Click to expand...
Click to collapse
try standing closer to your router, works every time
Triumph said:
do you currently have a 802.11b device connected at the same time as the Evo 3D?
802.11n on the 2.4 side, might be talking slower because you have a slower device connected? (maybe an old iPhone, or old laptop or something?)
If that doesn't work, take off mixed mode, and set it only to n, or at least G and N.
Click to expand...
Click to collapse
Ummm. You quoted the wrong post. My n works fine. I was trying to help the other member
Locked & Loaded
qualitymove13 said:
I believe so. My routers settings page shows mixed mode b, g and n and all of the other settings seem to be set to auto.
I also toggled "best wi-fi performance" as well to see if there was a difference. None.
Click to expand...
Click to collapse
Well you might have to invest in a different router. Your router needs to be set at 2.4ghz in order for the 3d to see the ssid and connect. Otherwise it will only see the g. Try updating your routers firmware and see if that might help. Also call the tech support or check the routers website to see if it supports 2.4ghz
Locked & Loaded
laie1472 said:
Well you might have to invest in a different router. Your router needs to be set at 2.4ghz in order for the 3d to see the ssid and connect. Otherwise it will only see the g. Try updating your routers firmware and see if that might help. Also call the tech support or check the routers website to see if it supports 2.4ghz
Locked & Loaded
Click to expand...
Click to collapse
Thank you for the help. Looks like there is no firmware upgrade as it it a draft 802.11 n router. Time for a new one... :-/
qualitymove13 said:
Thank you for the help. Looks like there is no firmware upgrade as it it a draft 802.11 n router. Time for a new one... :-/
Click to expand...
Click to collapse
Not a bad thing. A netgear 3500 dualbad will only set you back about 170 + warranty of course. But look at it like this do it now and its over. Got mine from bestbuy with a 4yr warranty. With this router you can have multiple networks setup. I have the 5ghz for my 3 desktops and my laptop which support the signal. Then I have the 2.4ghz n just for the 3d. Then I also have a guest network for friends who visit and want to connect which is a,b,g or n. You can configure the networks as you see fit. Its a great investment imo and with the 4yr warranty you covered. Hope this helps.
Locked & Loaded
catejust said:
That really is too bad... I thought I remembered having read somewhere that the 802.11 chipset in the 3D supported 5Ghz..? If that's the case I would be curious if a different firmware or driver might be able to enable use of the 5Ghz spectrum.
Click to expand...
Click to collapse
Yeah the EVO 3D does not support 5ghz N Band.....at least it doesn't detect mine.
Does any phone out support 5 GHz wireless n? I'm not positive but I don't think so. And even if it does what ISP has speeds that even come close to the speeds available in that spectrum? I have 5 GHz n on my computer and yes it performs better on speed tests than my 3D but Time Warner isn't selling 300 Mbps service. My 3D and my OG EVO both cap out at 72 Mbps which I attribute to "good neighbor" mode in 2.4 GHz which basically never let's you use channel bonding that is required for higher speeds. That being said 72 Mbps is more than sufficient for anything I'm doing on my phone especially considering my service is only 15/2 Mbps. On a separate note I did notice the Samsung 10.1 tab does support 5 GHz.
Sent from my 3VO using Tapatalk
Is the N on a separate chip in the 3vo? I don't understand how N would suck the battery faster than G. I thought N was more efficient than G.
dannytill said:
Does any phone out support 5 GHz wireless n? I'm not positive but I don't think so. And even if it does what ISP has speeds that even come close to the speeds available in that spectrum? I have 5 GHz n on my computer and yes it performs better on speed tests than my 3D but Time Warner isn't selling 300 Mbps service. My 3D and my OG EVO both cap out at 72 Mbps which I attribute to "good neighbor" mode in 2.4 GHz which basically never let's you use channel bonding that is required for higher speeds. That being said 72 Mbps is more than sufficient for anything I'm doing on my phone especially considering my service is only 15/2 Mbps. On a separate note I did notice the Samsung 10.1 tab does support 5 GHz.
Sent from my 3VO using Tapatalk
Click to expand...
Click to collapse
Don't forget the 3D can act as a dlna server si you can use more speed.
Anyone else confirm?
I'm seeing that this will not connect to my 802.11n network, won't even see it in fact, that runs on 5GHz. Connects to 2.4GHz networks fine.
Looking at spec sheet, no frequency is listed. I would assume as with most devices it is 2.4 only? Gonna test it here in a few myself.
I don't know of any mobile device that supports 802.11n dual band. All the phones/tablets only use 2.4 ghz band for 802.11n as far as I can tell.
MultiDev said:
I don't know of any mobile device that supports 802.11n dual band. All the phones/tablets only use 2.4 ghz band for 802.11n as far as I can tell.
Click to expand...
Click to collapse
My Galaxy Tab 7 supports 802.11n on 5 GHz, though only some of the channels my router supports.
I have not been able to get my Photon to connect to the Wireless N network on my router, only the Wireless G network. Not sure what's up with that?
My Motorola ATRIX connects to the 2.4 and 5 GHz network. I can confirm the photon does not.
Sent from my MB860 using XDA Premium App
Is everyone sure about this??? I have a wireless N setup, photon connected fine, running about 65Mbps with good signal
A2CKilla said:
Is everyone sure about this??? I have a wireless N setup, photon connected fine, running about 65Mbps with good signal
Click to expand...
Click to collapse
Be aware the question is regarding 802.11n @ 5Ghz.. You can have an 802.11n setup with just 2.4Ghz (most common)
RickNY1971 said:
Be aware the question is regarding 802.11n @ 5Ghz.. You can have an 802.11n setup with just 2.4Ghz (most common)
Click to expand...
Click to collapse
oh, my mistake, but i'm pretty sure i have it at 5Ghz, cause i have my N network and a G network setup (for some of the laptops in the house) on the same router
A2CKilla said:
oh, my mistake, but i'm pretty sure i have it at 5Ghz, cause i have my N network and a G network setup (for some of the laptops in the house) on the same router
Click to expand...
Click to collapse
802.11b, 802.11g and 802.11n broadcast on the same 2.4GHz signal, 5GHz signal is only for 802.11n.
And no, these radios are only 2.4GHz.....I've tested at home as well.
A2CKilla said:
oh, my mistake, but i'm pretty sure i have it at 5Ghz, cause i have my N network and a G network setup (for some of the laptops in the house) on the same router
Click to expand...
Click to collapse
Even with a dual-radio router, it's possible they're both running on 2.4 I believe. Could you go into your router configuration and check what channel you're running your N network on?
manekineko said:
Even with a dual-radio router, it's possible they're both running on 2.4 I believe. Could you go into your router configuration and check what channel you're running your N network on?
Click to expand...
Click to collapse
I will check when i get home and give an update
A2CKilla said:
I will check when i get home and give an update
Click to expand...
Click to collapse
Did you check?
TS
twospirits said:
Did you check?
TS
Click to expand...
Click to collapse
i gave it a gander, either i'm lookin in the wrong place or i'm really not running 5Ghz
hello,
i would like to know, how fast SGS3 can connect to my cisco e4200 n router that advertise 450mbps throughput ..
i'm trying to get 450mbps connection to my router..
on my router i setup wireless n and wireless bg network..
when i connect to 2.4g network i get 75mbps connection 1m away from router.
the same speed i get when i connect SGS3 to 5ghz network..
what i'm doing wrong?
thx
by
kikan
This
http://homecommunity.cisco.com/t5/Wireless-Routers/E4200-How-do-you-connect-at-450Mbps/td-p/376169
Sent from my GT-P1000 using xda app-developers app
I would think a major limitation would be because the wifi chip + antenna are SISO not MIMO. It could also be a compatibility issue between wireless chipset in the gt-i9300 and the router
Addition:
There are other special requirements to achieve 450Mbps too...
Sent from my GT-I9300 using xda premium
thanks for advice,
i tried to setup my wifi in different ways, but no luck..
maximum connection i can reach is 72Mbps
Does any one manage to get higher connection between SGS3 and wifi router 802.11n ?
by
kikan
72 is as high as it goes
Sent from my GT-I9300 using xda app-developers app
NetCopAD said:
72 is as high as it goes
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
With my netgear wndr3700 I can connect at 150mbps
Sent from my GT-I9300 using xda premium
I'm getting 150mbps on the VirginMedia Superhub running 5Ghz
o.k. so is possible that i have something wrong with my cisco E4200 router..
so SGS3 have only single-stream ?
because my router for 450Mbps have to use all tree-streams..
thank to all for responding...
i will have to send an email to cisco...
now i will flash ddwrt firmware to see if is there any difference
by
kikanx
kikan said:
o.k. so is possible that i have something wrong with my cisco E4200 router..
so SGS3 have only single-stream ?
because my router for 450Mbps have to use all tree-streams..
thank to all for responding...
i will have to send an email to cisco...
now i will flash ddwrt firmware to see if is there any difference
by
kikanx
Click to expand...
Click to collapse
nothing wrong with cisco...
i'm using omega rom and something in my rom is f...ed...
by
kikan
I get 75mbs on 2.4ghz wireless n and 150mbs on 5.0 wireless n.
cisco E1500 -
Cisco e1500 with ddwrt big
it has only 2.4Ghz and all get 72mbps...max.. G/N or only-N - same results
it's advertised like 300Mbps...
by
kikan
wifi boost over service mode
hi, long time no hear..
just want to share this tip, that i found out few minutes ago..
http://www.youtube.com/watch?v=zdv-I-XkTt4
now i can connect to my cisco e4200 over 5gHz with 150Mbps connection...
still didn't found out how can i get 450mbps on samsung galaxy s3...or at least 300mbps...
on e4200 i set up only wireless N on 40MH channel...and wpa2 pre...
by
kikan
kikan said:
hi, long time no hear..
just want to share this tip, that i found out few minutes ago..
now i can connect to my cisco e4200 over 5gHz with 150Mbps connection...
still didn't found out how can i get 450mbps on samsung galaxy s3...or at least 300mbps...
on e4200 i set up only wireless N on 40MH channel...and wpa2 pre...
by
kikan
Click to expand...
Click to collapse
As mentioned by xtechx, this is a chipset limitation. You'll just have to live with it since it only has a single antenna (meaning it supports about half of the maximum transmission speed of your router for Wireless N), as with most mobile wifi chipsets. Though if I remember correctly, the HTC One supports MIMO (full wifi speeds)
Sythun said:
As mentioned by xtechx, this is a chipset limitation. You'll just have to live with it since it only has a single antenna (meaning it supports about half of the maximum transmission speed of your router for Wireless N), as with most mobile wifi chipsets. Though if I remember correctly, the HTC One supports MIMO (full wifi speeds)
Click to expand...
Click to collapse
hi,
thnks for info....
by
kikan
P.S. after switching off , power saver on WIFI (in service mode), my battery is empty in 18hrs...
itetin zagashira
kikan said:
hello,
i would like to know, how fast SGS3 can connect to my cisco e4200 n router that advertise 450mbps throughput ..
i'm trying to get 450mbps connection to my router..
on my router i setup wireless n and wireless bg network..
when i connect to 2.4g network i get 75mbps connection 1m away from router.
the same speed i get when i connect SGS3 to 5ghz network..
what i'm doing wrong?
thx
by
kikan
Click to expand...
Click to collapse
I only got 150M connection
andrewcw said:
I only got 150M connection
Click to expand...
Click to collapse
As mentioned by xtechx, this is a chipset limitation. You'll just have to live with it since it only has a single antenna (meaning it supports about half of the maximum transmission speed of your router for Wireless N), as with most mobile wifi chipsets. Though if I remember correctly, the HTC One supports MIMO (full wifi speeds)
by
kikan
kikan said:
hi,
thnks for info....
by
kikan
P.S. after switching off , power saver on WIFI (in service mode), my battery is empty in 18hrs...
Click to expand...
Click to collapse
Yeah, kind of normal behavior if you switch power save mode off. What do you expect?
Sent from my GT-I9300 using Tapatalk 4 Beta
kikan said:
hi, long time no hear..
just want to share this tip, that i found out few minutes ago..
http://www.youtube.com/watch?v=zdv-I-XkTt4
now i can connect to my cisco e4200 over 5gHz with 150Mbps connection...
still didn't found out how can i get 450mbps on samsung galaxy s3...or at least 300mbps...
on e4200 i set up only wireless N on 40MH channel...and wpa2 pre...
by
kikan
Click to expand...
Click to collapse
Thanks for the tip!! My Wifi speed according to the SpeedTest app is now 20Mbps which is twice what they were before turning off power save mode. However, they are still no where near what others are reporting for max speeds on the SG3
glad to hear this,
but power management will be hungry...
by
kikan
my be you can install wakelockdetector and manage to shutdown all not necessary process for you..
by
kikan
https://play.google.com/store/apps/details?id=com.uzumapps.wakelockdetector
Old post but what the heck.
Wireless devices are built to operate at given speeds.
Common Android device connection speeds are 54Mbits/sec(802.11g), 65Mbits/sec, 72Mbits/sec, 150Mbits/sec(5GHz).
As WiFi is half-duplex, you will never see 'real' data throughput at the listed connection speed.
At very best, you'll probably only see ⅔ the connection speed.
The connection speed is often dictated by the number of antennas a device has and generally max'd out at 150Mbit/sec on 2.4GHz frequency due to 20MHz channel allocation limit, where 40MHz channel allocation is not encouraged.
5GHz frequency connection speeds are generally higher as 5GHz is based on 40MHz channel width.
I have a Sony XPERIA M (C1905) with dual band (2.4GHz/5GHz) WiFi.
5GHz has a connection speed of 150Mbits/sec.
Over 5GHz it has a bandwidth throughput of 109Mbits/sec in an optimal environment.
5GHz is a higher frequency than 2.4GHz so it will not have the same signal strength of 2.4GHz at distance.(trade-off)
If you really want to test WiFi throughput on an Android device, you have to use iPerf for Android and then install a Windows/linux version of iPerf on a NAS/PC.
This will provide true maximum bandwidth/throughput available to your Android device in a LAN where your testing servers should not bottleneck the Android device you are testing.
Because of the channel allocation, you have to have a 802.11ac router if your Android device supports 802.11ac to obtain the max. 802.11ac throughput.
I am really experiencing slow wifi speeds on my
RN3. I am using cm13 unofficial stable build..
I tried to test the speed in the official nightly builds
The result is the same...
Did anyone experience this ?
what are your speeds? what type of network (802.11n/g/ac?) are you connecting to? What frequency?
goofball2k said:
what are your speeds? what type of network (802.11n/g/ac?) are you connecting to? What frequency?
Click to expand...
Click to collapse
When i was on stock miui
Speeds :
Download : 2.25 mbps
When i am on cm13
Speeds :
Download : 1.32 mbps
And also web pages load very slowly..
Saraf Vikyath said:
When i was on stock miui
Speeds :
Download : 2.25 mbps
When i am on cm13
Speeds :
Download : 1.32 mbps
And also web pages load very slowly..
Click to expand...
Click to collapse
That doesn't give me much indication on the network you're connecting to. Is it wireless N? AC?
What are you using to test to get your speeds?
goofball2k said:
That doesn't give me much indication on the network you're connecting to. Is it wireless N? AC?
What are you using to test to get your speeds?
Click to expand...
Click to collapse
Well..
My broadband : ACT Fiber
My router : D-Link
Testing : Ookla speed test.
By the way i saw many threads regardimg this problem with cm13 in other sites..
But non has solved it..
I tried to Change DNS but nup..
D-Link what? What model specifically.
I believe the RN3 only has 1x1 MIMO antenna so only 72mbps for 2.4Ghz and 433mbps for 5Ghz AC.
on 2.4Ghz, I get around 70mbps, and 5ghz, I get around 200 mbps
Personnally Wi-Fi is working fine for me on my Kate device with the CM13 build for Kenzo.
With the speedtest.net app I can max out my Internet connection speed at 43 mbps.
Hi!
My internet speed is 200 download/100 upload. On my laptop get around 80/80 via wifi, but on my phone only 50/50. All this near the router (no AC, just N).
Can someone confirm the maximum speed RN3 Pro SD650 can handle via wifi N?
Cheers! : )