Related
Seems the root tool used in Xperia Z is not worked in Japan version SO-03e with firmware10.1.E.0.250, just want to know anyone could provide other approach to root it. Thanks.
i had my SO-03E rooted on 3 May after upgraded to 250... using the root many android tool developed by Bin4ry.
http://forum.xda-developers.com/showthread.php?t=1886460
but it stop at '/data/local/tmp/onload.sh ...' while i run the same tool. I checked my friend who have this same tablet, he also encounterred the same problem after upgrade to 250. Seems it works on 244, but no way to downgrade
rankman2004 said:
but it stop at '/data/local/tmp/onload.sh ...' while i run the same tool. I checked my friend who have this same tablet, he also encounterred the same problem after upgrade to 250. Seems it works on 244, but no way to downgrade
Click to expand...
Click to collapse
Same for me..:crying:
K4HD said:
Same for me..:crying:
Click to expand...
Click to collapse
Go to this thread and download http://forum.xda-developers.com/showthread.php?t=2284082 (mine is wifi only ; don't know if this work with LTE device).
I updated mine to latest FW before rooting mine and have the same issue as you guys (stuck at '/data/local/tmp/onload.sh).
Downgraded and root it fine and root is retained after upgraded to Sony's latest.
plutozz said:
Go to this thread and download http://forum.xda-developers.com/showthread.php?t=2284082 (mine is wifi only ; don't know if this work with LTE device).
I updated mine to latest FW before rooting mine and have the same issue as you guys (stuck at '/data/local/tmp/onload.sh).
Downgraded and root it fine and root is retained after upgraded to Sony's latest.
Click to expand...
Click to collapse
Thanks, but it's not working with LTE device (SO-03E). The only way to root XTZ LTE Docomo is to dowgrade to 10.1.E.0.244.
i followed the step-by-steps instructions from this post. using Bin4ry's tool.
http://forum.xda-developers.com/showthread.php?t=2186368
extracted for your quick reference
"... How-to:
Preparation
1. increase screen timeout to 10 mins: Settings -> Display -> Sleep -> 10 mins
2. enable USB debugging : Settings -> Developer options -> Enable and Settings -> Developer options -> USB Debugging (check it)
3. enable install from "unknown sources": Settings -> Security -> Unknown source (check it)
4. download the rooting toolkit package and save it on C:\
5. exit all adb requiring apps like PC Suite, PC Companion, Flashtool, etc as they will interfere with the rooting process
6. extract the ENTIRE contents of the package (and not just one file) to some directory on c:\
Execution
7. once you are ready with all the above connect phone to PC and execute "runme.bat" from the location where the entire contents are extracted
8. press enter to start the process, as the device is detected the toolkit will start executing steps one by one
9. keep watching the command prompt and wait for the following to come up "press the button to restore the data in your phone"
10. at this point look at the device screen, an app will start, select RESTORE data
11. now u will get "if Restoring data is complete," in the command prompt
<not applicable to tablet> 12. at this point open Phone & dial *#*#7378423#*#* <not applicable to tablet>
13. select "Service tests" in your phone operation.
14. select "Display" (screen will turn white), the toolkit will now start executing some commands
<i did not remember i had done this step. as it reboots automatically> 15. now press power button to turn off screen wait for few seconds and press it power button again (repeat it a few time) till then keep observing the command prompt for outputs
16. u will see "transfer files to your phone part2", "installing busybox,su,Superuser,etc..." & finally "Cleaning up"
17. after that the device should automatically reboot
18. thats it device should now be rooted ..."
please give me a thanks. if you find this useful.
jaseli said:
i followed the step-by-steps instructions from this post. using Bin4ry's tool.
http://forum.xda-developers.com/showthread.php?t=2186368
extracted for your quick reference
"... How-to:
Preparation
1. increase screen timeout to 10 mins: Settings -> Display -> Sleep -> 10 mins
2. enable USB debugging : Settings -> Developer options -> Enable and Settings -> Developer options -> USB Debugging (check it)
3. enable install from "unknown sources": Settings -> Security -> Unknown source (check it)
4. download the rooting toolkit package and save it on C:\
5. exit all adb requiring apps like PC Suite, PC Companion, Flashtool, etc as they will interfere with the rooting process
6. extract the ENTIRE contents of the package (and not just one file) to some directory on c:\
Execution
7. once you are ready with all the above connect phone to PC and execute "runme.bat" from the location where the entire contents are extracted
8. press enter to start the process, as the device is detected the toolkit will start executing steps one by one
9. keep watching the command prompt and wait for the following to come up "press the button to restore the data in your phone"
10. at this point look at the device screen, an app will start, select RESTORE data
11. now u will get "if Restoring data is complete," in the command prompt
<not applicable to tablet> 12. at this point open Phone & dial *#*#7378423#*#* <not applicable to tablet>
13. select "Service tests" in your phone operation.
14. select "Display" (screen will turn white), the toolkit will now start executing some commands
<i did not remember i had done this step. as it reboots automatically> 15. now press power button to turn off screen wait for few seconds and press it power button again (repeat it a few time) till then keep observing the command prompt for outputs
16. u will see "transfer files to your phone part2", "installing busybox,su,Superuser,etc..." & finally "Cleaning up"
17. after that the device should automatically reboot
18. thats it device should now be rooted ..."
please give me a thanks. if you find this useful.
Click to expand...
Click to collapse
as i said, i followed the instructions,but the tool stop at '/data/local/tmp/onload.sh ...' for a long time, can not continue. It is strange that you did not encounter this problem after upgraded to 250. Seems all of the users enounterred this error after upgraded to 250.
@jaseli how do you open the Service menu in step 12-13 without dialer?
rankman2004 said:
as i said, i followed the instructions,but the tool stop at '/data/local/tmp/onload.sh ...' for a long time, can not continue. It is strange that you did not encounter this problem after upgraded to 250. Seems all of the users enounterred this error after upgraded to 250.
Click to expand...
Click to collapse
@rankman2004
when i am trying to upgrade my rooted tablet using FTF file, i remember that there is a preparation step not included above. but i found in another Taiwanese forum.
included here and please let me know if it helped.
1. make sure tablet is not connected to PC
2. settings => Xperia => USB connection
3. USB connection mode => choose MSC mode (default is MTP which might prevent the root tool to proceed)
Hondaracer said:
@jaseli how do you open the Service menu in step 12-13 without dialer?
Click to expand...
Click to collapse
the service menu pops out automatically. not need to use dialer.
jaseli said:
@rankman2004
when i am trying to upgrade my rooted tablet using FTF file, i remember that there is a preparation step not included above. but i found in another Taiwanese forum.
included here and please let me know if it helped.
1. make sure tablet is not connected to PC
2. settings => Xperia => USB connection
3. USB connection mode => choose MSC mode (default is MTP which might prevent the root tool to proceed)
the service menu pops out automatically. not need to use dialer.
Click to expand...
Click to collapse
@jaseli, you rooted before upgraded? If yes, I think it is the reason as the root is kept after upgraded!
rankman2004 said:
@jaseli, you rooted before upgraded? If yes, I think it is the reason as the root is kept after upgraded!
Click to expand...
Click to collapse
rooted after upgrade. care to share which root mode you chose? i used 3 new mode
從我使用 Tapatalk 2 的 SO-03E 發送
jaseli said:
rooted after upgrade. care to share which root mode you chose? i used 3 new mode
從我使用 Tapatalk 2 的 SO-03E 發送
Click to expand...
Click to collapse
Yes, I choose option 3 new mode,what is the tool's version? V29? After u choose the servicetest-> display, the tool will run without error?
rankman2004 said:
Yes, I choose option 3 new mode,what is the tool's version? V29? After u choose the servicetest-> display, the tool will run without error?
Click to expand...
Click to collapse
since i did that on May 3, i think used the latest version, v30?
i got the tablet rooted... maybe that was an error or two. but the end result is i can use the tablet as usual and have root at the same time.
just upgraded to 265 and the root many android tool does not work anymore.
stuck at the same place as everyone now.
the white screen (tablet) with '/data/local/tmp/onload.sh in windows command box
jaseli said:
since i did that on May 3, i think used the latest version, v30?
i got the tablet rooted... maybe that was an error or two. but the end result is i can use the tablet as usual and have root at the same time.
just upgraded to 265 and the root many android tool does not work anymore.
stuck at the same place as everyone now.
the white screen (tablet) with '/data/local/tmp/onload.sh in windows command box
Click to expand...
Click to collapse
I have .265 also and experience same issue when trying to root. Did you manage to get rooted with .265 ?
I tested with.250 , not working...
Please tell me how to get to the ROOT SGP321 .253?
Bootloader unlocked.
June 02, 2015
Edit: If anyone has a link to the stock ROM for the Ascend G7, please let me know. I would love to make a custom ROM that doesn't take up 98% of all resources 99% of the time.
Hello everyone.
Before I get started, here is everything you need to know about this post.
- This root works as of June 29, 2015
- This is a rooting process for the Huawei Ascend G7
- I did not make this, so please consider supporting all mentioned sources
- I am a new user to XDA, but I've been developing for over a decade. I will regularly check this post if enough people who view it have questions
There are two parts to this process.
First, we unlock the bootloader
Second, we flash a recovery, and subsequently, SU (root)
Let's get started. This will take at least 16 hours. User interaction 5 minutes, and about a 16 hour wait for an email response from Huawei.
Also, I have a new account, so I cannot post links. So please bear with me. I will upload photos in as best order as I can.
Before we get started, please note that your phone will factory reset in this process.
First thing's first. The Ascend G7 requires an unlocked bootloader, before any root can take place. This is obviously temporary, until someone finds a circumvention. But for now, this is how this needs to be done.
Send an email to [email protected], with this format:
Dear Sir/Madam
Please may I request the bootloader unlock code for my Huawei Ascend G7?
Here are some Details:
Serial Number: (Found under Settings --> About phone --> Status)
IMEI: (Found under Settings --> About phone --> Status)
Baseband version: (Found under Settings --> About phone)
Please could you send me the code directly, as I cannot access the product ID on my device.
Thank You
Your name
This part is important. Sometimes, they do not even reply to your email(s). It is recommended - nay, required - for you to put "URGENT" in the subject field of the email. Something along the lines of "URGENT Request Bootloader Unlock Code." It would also be best if you mark your email as urgent/high priority, as well.
Meanwhile, while you wait for the email from them with your unlock code, (expect it to arrive the day after), download the Android SDK and the Java JDK, if you haven't already. What you need most are the SDK tools, which you can also download by typing in "SDK tools android" in Google and finding a download for the stand-alone tools.
Make sure Android Studio is updated, if you already have it. To make sure you have everything you need, open up command prompt in platform-tools, by holding shift and right clicking somewhere on the white, in the folder, (explained in attached picture).
Then, plug in your phone. Make sure USB debugging is enabled. To do so, go to Settings --> About phone --> Tap "Build Number" 7 times in a row. Then go back, and you will see "Developer options." Click on that, and enable USB debugging. Also, this optional, but I like to enable the "Stay Awake" function.
Make sure to accept any prompts that your phone will ask.
Then, go to the command prompt and type in "adb devices" without the quotations.
If you've done everything correctly so far, you should see something similar to the attached command prompt image file.
If everything checks out, let's proceed. If not, post below, and I, or fellow XDA users, will help you out.
Proceed to type in, "adb reboot bootloader" without the quotations, into the command prompt window that you opened. Your Ascend G7 should reboot into fastboot, where you will see something like the attached picture below, of the bootloader screen.
Except, it will say Phone Locked instead of Phone Unlocked.
Now, go back to your command line, and type in "fastboot reboot," to have access to your phone and its functions, while you wait for the email from Huawei.
`````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````
Everything below this line should be done AFTER receiving a reply email from Huawei, with your unlock code.
Now, download the "PHILZ-TOUCH-6.rar" file. I cannot attach it here because it exceed file size limit. No virus, no surveys, here's the link, https/goo.gl/sxPv7I. Just add a colon and a forward slash after https. It is not a virus, in case your firewall or antivirus software brings up red flags. I will post the whole ZIP that I've downloaded from another website. There's a bunch of redundant elements in the folder, but just in case you know what you're doing and might need the tools, I'll keep them there. But all you will need are 2 things from the folder. They're mentioned next.
Go to where you extracted PHILZ to, and hold shift and right click and open a command window in that directory, and type in "adb devices" one more time to make sure your device is listed and connected. Then, type in "adb reboot bootloader," give it a second, and then when fastboot loads up, type in,
fastboot oem unlock 123456789123
Replace "123456789123" with the unlock code provided to you from the Huawei email. Give it a second, and then you should be good. It should now say "Phone Unlocked" in red. Now, type
"fastboot reboot"
in the command line (that was opened in the PHILZ folder), without quotations. Then type,
adb reboot bootloader, one more time, and then,
Navigate to the PHILZ folder, and run "install-windows.bat" as administrator, if using Windows.
If using Linux, run "Install-Linux.sh," and if using a Mac, run "Install-Max.sh"
Now, in CMD type,
fastboot boot recovery.img
Then, again type in
fastboot reboot
Your phone will reboot.
`````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````
Aaaaaaand that's it! You should now be rooted. I recommend going to play store, and downloading a Root Checker to ascertain root access.
The last picture, where it says I have root access now, is a program called Root Genius. It's a one click tool to root any android device - obviously except the Ascend G7, (knowing my luck). But it does work as a root checker as well, if you want to ascertain root access. You can also download Root Checker from the play store; works more or less the same way.
Any questions, feel free to ask. Re-reading this, I could see if the instructions bring confusion to some. I will be glad to clarify any questions.
Works
Root confirmed G7-L01
some point that I did not understood
dear wertywhy,
your guide is really well done, but there are some points not clear to me
1) open up command prompt in platform-tools
what is platform-tools? A specific folder? I was not able to find it
2) if I open the command prompt from any forlder using the shift+right button as you said and then write adb devices I get this message:
'adb' is not recognized as in internal or external command operable progrma or batch file. What should I do?
3) when I connect the phone by usb cable, should I do something more (like enabling device file manager, pc suite or other options) or just connect it in charge only mode?
thank you for your time!
and... by the way, I'm really impressed that I got the anwer from Huawei with the code, that's really cool! Thank you!!
---------- Post added at 04:09 PM ---------- Previous post was at 03:19 PM ----------
I found the platform-tools folder, now if I type adb devices from a prompt open from that folder I don't get the error message anymore, but I get nothing, just the flashing prompt line (the huawei phone is on and usb connected to pc)
dear wertywhy,
your guide is really well done, but there are some points not clear to me
1) I had to install hi-suite to let the command adb work (before that adb was not finding the phone)
2) the file names of adb inside PHILZ_TOUCH is adb-windows and fastboot is fastboot-windows
3) when I input the command adb-windows devices inside the prompt inside the PHILZ folder the result is device offline, I could unlock the phone running the command from platform-tools directory (phone is unlocked now) but I can't run the command to root the phone until I have this "device offline"
Point 1 and 2 are not problem, just something that happened to me, but point 3 is stopping me, any idea how to solve point 3?
Frankleoni said:
3) when I input the command adb-windows devices inside the prompt inside the PHILZ folder the result is device offline, I could unlock the phone running the command from platform-tools directory (phone is unlocked now) but I can't run the command to root the phone until I have this "device offline"?
Click to expand...
Click to collapse
I'm having the same problem. I tried toggling usb debugging off and back on, tried another usb port and another PC (WIN 7 and 8) but none of that helped.
<device offline>
Frankleoni said:
dear wertywhy,
your guide is really well done, but there are some points not clear to me
1) I had to install hi-suite to let the command adb work (before that adb was not finding the phone)
2) the file names of adb inside PHILZ_TOUCH is adb-windows and fastboot is fastboot-windows
3) when I input the command adb-windows devices inside the prompt inside the PHILZ folder the result is device offline, I could unlock the phone running the command from platform-tools directory (phone is unlocked now) but I can't run the command to root the phone until I have this "device offline"
Point 1 and 2 are not problem, just something that happened to me, but point 3 is stopping me, any idea how to solve point 3?
Click to expand...
Click to collapse
Hi Frank,
Let's troubleshoot,
If it lists your device as offline, open up cmd (Run --> cmd), and type in,
taskkill /f /im adb.exe
Then, restart your G7; when it boots up, turn off and then on USB debugging, then find PHILZ, and retry point 3. If device is still offline, please let me know. The issue sounds like it's within the phone, not within ADB.
Alternatively, if that doesn't work, please delete PHILZ off your computer, and wherever it says "PHILZ" in my guide, replace it with the attached folder, (attached with this reply).
Cheers
PS, please make sure to check that your phone is not only in USB debugging mode, but that you've approved/allowed your computer access to your phone, (a prompt will show up on the Ascend G7 that asks you whether or not you trust your PC). And also make sure your phone isn't just set to "charge" when plugged in - activate/select MTP when you connect your phone to computer.
<device offline>
lume12 said:
I'm having the same problem. I tried toggling usb debugging off and back on, tried another usb port and another PC (WIN 7 and 8) but none of that helped.
Click to expand...
Click to collapse
Please refer to my reply to Frankleoni below.
Thank you for replying chy_vak,
I tried your solution in both the PHILZ folder and the new folder you attached. The device shows offline in both of them. However in the build-tools folder it shows online. The command line taskkill /f /im adb.exe terminated adb but the device still shows offline. I did everything in the exact order you wrote.
offline
search Kings Root via Google Chrome, install it and run it Easy and without chat with Huawei support
Kingroot Works like a charm !
@chy_vak, Thank you for your Work. 1st Part works great. 2nd Part went wrong, i dunno why i`ve tried every thing. I hate this Kingroot think, don`t touch it you never will leave it.
I have connect my G7 because unlock works. When i use CMD from Adb Tool it is connected, when i use command prompt from Philz he cant see and find the mobile?? Something for you absolute clearly, isn`t for other. Sry cant do screenshot with notebook and Win 10. have fun
Another Working Method to Root Huawei Ascend G7-L01/L03
Greetings!
I got an Ascend G7 Recently and I needed to Root it as soon as I got it. That's why I kind of broke my head looking for the current methods to do it. I found this one very promising so I started working. I followed the steps that were given to us one by one. Everything was alright until I tried to install the Windos-Installer.bat as administrator, I tried to many ways to this method work, but as much as I tried, I couldn't go with it, that's why I started working for 11 hours until I got it. This Worked for me, and I want to share it with you.
Please read the following notes before you start by rooting your device:
-As usually, do it at your own risk, I'm not responsable of any brick, or issue that damaged your device.
-This Method is working great on Windows 10
-This Method is working at 04/08/2015
-This Method, was tried by me, the directions I give to you, are based on my work by rooting my device and my experience, the software and files included were made and posted by someone else including the person who wrote this post: http://forum.xda-developers.com/gen...-confirmed-t3125621/post61122491#post61122491
-You can find screenshots of the procedure below
-You will need a microSD
-I strongly recommend you to have at least 80% of battery to avoid risks of bricks
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Here begins the directions:
1.- As has been said, you will need to unlock your device bootloader in order to root your phone. So as they said, you will need to write an email to Huawei. The mail you will send should look like this:
To: [email protected],
[email protected]
Subject: (URGENT) Unlock Bootloader
Model: Huawei G7-L03/L01 (Depends on your version)
Serial Number: (The one that comes in your Huawei's box)
IMEI: (You can get it on your box or in the info included on Configuration->About the phone->State
Product ID: (You can get it by typing on the Dial the next code: *#*#1357946#*#*)
I appreciate your concern of reading this. Waiting for a response.
Sincerely: (Your name)
After a while (Could take between 15 minutes and 16 hours depending on their time) A Huawei worker will answer you something like this:
Dear Customer,
Thank you for supporting Huawei device. My working number is ****. Your unlock code :************** , please keeping your unlock code properly.Thank you!
Huawei Terminal Company limited
1.1.- (OPTIONAL) As we are going to unlock the bootloader, we are going to make a factory reset, so I strongly recomend you to make a backup with the official huawei backup app in order to restore our settings, apps, and files.
1.2.- Once Again, as has been said, you will need to download the whole Android suite (Android Studio) the last version, update your java version, and download the last drivers for your device (A good way to do the last is by installing the HiSuite of Huawei).
1.3.- You need to activate the debug mode. You can find it in: Configuration->Developer Options->USB Debug (If you dont have the Developer options enabled, you have to go to Configuration->About the phone->Compilation And tap this last one 7 times)
2.- Download the .rar a the end of the page and extract it where you want, includes everything we are going to need. [You must put the file ''superuser.zip'' on your microSD (In the root of the microSD)]. After Downloading it, you must open a cmd window, running it as administrator. After that you will write:
cd (Here you should paste the ubication of your extracted File Ex: C:\Users\Josh\Downloads\Root Ascend G7)
Now you are in this ubication that includes adb. Write:
adb devices
You should see: List of devices attached, a code and the word device (There is a capture below). If you do, we can proceed.
3.- Type :
adb reboot bootloader
It should load a white page with the Android pet and the words FASTBOOT&RESCUE MODE Below there is the phrase ''PHONE LOCKED'' in color. Now type:
fastboot oem unlock *********** (The code Huawei gave to you)
Now your phone will make a factory reset. You will see how it reboots by itself and back to the default settings. You will need to activate the debug USB mode again. By this point its supposed your bootloader is now unlocked, to probe it, we will type again:
adb devices (To check it is correctly plugged)
Then we will type:
adb reboot bootloader
And now at the end of the page it should say: ''PHONE UNLOCKED''. If you do, we can proceed.
4.- At this point, you have two options: You can replace your stock recovery mode by a ClockWorkMod Recovery (I strongly recomend you to do that) or you can just ROOT the phone whithout replacing your stock recovery.
If you decided by replacing your stock recovery follow the next directions: We still have our CMD window opened and running adb while the phone it is on the bootloader mode. So now what you have to do it's to type:
fastboot flash recovery recoveryP.img (CMD will work and show a few commands)
And after that type:
fastboot reboot
Your phone will reboot again normally and we can proceed.
If you decided not to replace your stock recovery instead of typing ''fastboot flash recovery recoveryP.img'' you have to type:
fastboot boot recoveryP.img (This will send you directly to CWM recovery)
5.- You must acces to CWM Recovery.
If you installed it on your phone, turn off your device and then press the power button and vol+ until the Huawei logo appears, you should be in the recovery mode by now.
If you didn't install it, you already are in CWM recovery.
6.- With the vol and power buttons or the touch buttons at the end you should be able to navigate on the recovery. We go to:
Advanced Functions->Re-root System (SuperSu)->Yes-Apply SuperSu (You will see a few code at the end of the screen)
7.- Without leaving the recovery mode, go to the main screen and now we go to:
Install Zip->Choose zip from /sdcard->superuser.zip (The one that you previously putted on your microSD)->Yes-Install superuser.zip
(You will see again a few code at the end of the page) We go back to the main screen and Select:
Reboot System now
8.- It's supposed we are ROOT now. At first you will see the ''superuser'' app installed. To probe that works, Install ''android-terminal-emulator-1-0-70-multi-android.apk'' that it is included on the folder ''Terminal'' form the file you downloaded. Now open a new terminal window and type
su (If everything worked, superuser will ask for permissions)
8.1.- Restore your data with the Huawei Backup App
And that is all we have superuser acces now. If you have any question or issue let me know and I will help you.
https://mega.co.nz/#!Al9FxDBY!QHkljnnIbjURX01A59tJPNkAVQd3LbKTqRJHD_nNxrs
Thank you!
Cant boot into recovery
Hey guys so i tried following this procedure but it never works :/ if i flash the custom recovery and try boot into it, the phone directly goes to fastboot and rescue mood so cant boot into recovery, not even the stock recovery. if i try directly booting into the custom recovery it says dtb not found :/ can someone please help me?
the model is G7-L11 and the bootloader is unlocked
Engineer Mode Huawei Ascend G7 L03
Huawei Ascend G7 L03
Hi,
I have tried every thing to go into Engineer Mode.... Even Mobile Uncle Does not do that!
Please some one Help....
Huawei Ascend G7 L03
thanks for the translated philz touch
Hello everyone, I have a big problem with a Huawei G7. I did Philz Touch and Root. How can I go back to stock rom?
I've emailed Huawei 3 times now, left a week in between emails, and still haven't received my unlock code. Has anyone else had this issue?
Thanks
1.- As has been said, you will need to unlock your device bootloader in order to root your phone. So as they said, you will need to write an email to Huawei. The mail you will send should look like this:
To: [email protected],
[email protected]
Subject: (URGENT) Unlock Bootloader
Model: Huawei G7-L03/L01 (Depends on your version)
Serial Number: (The one that comes in your Huawei's box)
IMEI: (You can get it on your box or in the info included on Configuration->About the phone->State
Product ID: (You can get it by typing on the Dial the next code: *#*#1357946#*#*)
I appreciate your concern of reading this. Waiting for a response.
Sincerely: (Your name)
Does anyone have a good tutorial on how to flash twrp on the phone ? I've tried different things but it never works
any other method exept this email method? they wont answer me.
So we just managed to get our Huawei P9 Plus (VIE-AL10C00B106) successfully rooted
0.) *** if you have your Bootloader UNLOCK Code from Huawei, jump to STEP 3 ****
1.) downloaded DC-Unlocker, created a account, added 4 Credits(4EUR) to account. Device should have USB DEBUG Mode enabled and you need to enable 'Manufacture' mode: in dial pad type *#*#2846579#*#* - you enter the "Project Menu", go to "Background settings" -> "USB ports settings" and switch to "Manufacture mode". Dont forget to have your device Drivers (ADB) installed
2.) Once your P9 Plus is normal booted, start DC-Unlocker (here we tested 1.00.1299) , select "huawei phones" with "auto detect" and hit the Search-Button. Your device should be found and listed with IMEI, FW ect.
If you have entered your account details under "SERVER" in dc-unlocker, you can now use the "read bootloader" Button to get your bootloader unlock code - your Credits are GONE then. SAVE THIS CODE BEFORE CLOSING DC-UNLOCKER!!!!!!
3.) Boot your device in fastboot - screen should show "locked" as status on the white screen. Type command "fastboot oem unlock XXXXXXXX" (replace the XXXX with your unlock code from DC Unlocker)
4.) Phone Screen should show a WARNING Message and offer to press VOL UP to UNLOCK phone - WARNING, if you select UNLOCK and press PWR Button to agree, DEVICE WILL INSTANTLY RESETED TO MANUFACTUR DEFAULT
5.) Download the Root-SuperSU-v2.65.zip (DIRECT DOWNLOAD) and put it on a SD-Card
6.) Download the TWRP3.0.2_EMUI4.1_H95X File (DIRECT DOWNLOAD)
7.) Reboot your phone and re-enable USB DEBUG Mode, dont forget to ALLOW Debugging via PC if promped. Insert your SD-Card with the SuperSU Zip into your phone if not already done.
8.) RUN TWRP3.0.2_EMUI4.1_H95X, it will reboot your phone in Fastboot mode. By pressing 1 and then enter, you will Install TWRP 3.0.20. Follow the instructions, by pressing enter again your phone should reboot
9.) while rebooting, HOLD VOL UP and VOL DOWN together pressed until Phone tell you "booting", it should boot into TWRP now
10.) On TWRP, in the right Corner, you can Switch Language from Chinese to English (selectable, dont worry). Now go to INSTALL, move to EXT_SDCARD as source and select the SuperSU ZIP -> INSTALL
the installation of SuperSU may show mounting/unmount errors, but will be installed anyway.
After Operation is done, reboot your Phone into normal Mode. You should find SuperSU installed on your device now.
Working Firmware Versions :
VIE-AL10C00B102*
VIE-AL10C00B106
VIE-AL10C00B163
If anything goes wrong, you may RESTORE your phone to TOTAL Stock by downloading
*VIE-AL10_C00B102 (initial CN nonspecific_Android 6.0_EMUI4.1) firmware - DOWNLOAD HERE (LINK will be added later)
Put the UPDATE.APP File (~2.8GB) (content of SDupdate_Package.tar.gz) in an folder named "dload" on your MicroSD Card and reboot phone with holding VOL UP and VOL DOWN. If the Huawei Logo appears, keep Buttons pressed until DEVICE gives you a vibration impulse. Device should now completly restore initial Firmware from SD-Card. PHONE IS LOCKED again after is operation.
****** i will add Firmware Files B102(initial full release), B106(update) and B163(latest update) LATER to this thread, need to Upload them first ******
Thanks. Can Xposed work on ?
Faisal Alro8y said:
Thanks. Can Xposed work on ?
Click to expand...
Click to collapse
I flashed the framework and installed apk but it still keeps telling me "framework not running"
I'll try later again
not sure but is anyone having an issue trying to link google contacts and google calendar to the phone?
Yes, I had some problems but exported them from the web and inported them back in to the phone
Sathelp said:
Yes, I had some problems but exported them from the web and inported them back in to the phone
Click to expand...
Click to collapse
how did u do that?? so u exported it from Google contacts den used their Computer software to upload it all back in?? back there is no backup made to google moving forward yeah??
anyone knows when the international ROM will be out? i heard some variants actually allow for Google accounts to sync with the phone.
Yes, exported from the web page on my PC and put the file on my phone, then opened contacts on the phone, selected inport from the menu and imported them from the file I cresated. I found no other way at the time other than moving them to your sim card on another phone, then use that sim on your P9+
Calendar and contact sync adapter work fine here, we installed the apks I posted in the mate thread...
Does this unlock also work with the International versions for example VIE-L29 ?
Could anyone test if FlashFire works?
Guys here real TWRP with decrypt option. Chinese TWRP ****. My sources are clear and free for every one
http://forum.xda-developers.com/p9-plus/development/recovery-twrp-t3388330
Anyone could you please backup oeminfo p9 plus AL10 and share ? Thanks
Sent from my HUAWEI NXT-L29 using Tapatalk
somboons said:
Anyone could you please backup oeminfo p9 plus AL10 and share ? Thanks
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Down Here:
Unzip to:
/storage/sdcard0/TWRP/BACKUPS/YOUR_SERIAL_NUMBER/2016-06-13--04-34-28_OEMinfo_A10/
Restore Backup with: TWRP
hi, i apologize for such a noob question, but i've never rooted a phone before so i'm wondering what are the benefits of rooting the Huawei P9 plus? i understand the basic gist of what rooting does and why you'd want it for phones with heavy, heavy bloat (like, say, a Samsung S5 from a US carrier). but the VIE-AL10 unit's bloatware can mostly be uninstalled (i have the china unlocked version), and with NiLS lockscreen, Nova Launcher, and the Android N theme that i got from this forum, i was able to get the phone running mostly like a normal, clean phone without any sign of those tacky Chinese bloat.
so i'm just wondering at this point what more can root do? what do you guys plan on doing, or have done, to your P9 plus after rooting?
thanks, and apologies again if this is a really dumb question for those experienced in this.
tested on L29.
Phone unlocks but I got stuck on Encryption unsuccessful loop. I did full format, but this removed the OS completely.
I have TWRP running though
Ok working unlocked rooted xposed.
Will rooting/unlocking the bootloader void the warranty or trigger some sort of counter that cannot be reset ?
How to turn phone into recovery after switching of the phone ? need to help my brother in abroad.
sam razzy said:
How to turn phone into recovery after switching of the phone ? need to help my brother in abroad.
Click to expand...
Click to collapse
Power plus volume up+ volume down.
Basically press all the buttons together.
who could help me to have the stock firmware for AL10 ?? Thanks
jvelasco said:
Down Here:
Unzip to:
/storage/sdcard0/TWRP/BACKUPS/YOUR_SERIAL_NUMBER/2016-06-13--04-34-28_OEMinfo_A10/
Restore Backup with: TWRP
Click to expand...
Click to collapse
Can you unpacke and upload only oeminfo ? I don't have P9 plus , I will add in my SRK Tool huawei.
[GUIDE] Huawei P10 Debrand/Rebrand/Update for Nougat&Oreo "Updated_19.5.2018"
Huawei P10 debrand/rebrand/update GUIDE
This thread will be discontinued, because Huawei refuses to provide unlock codes in the future, because of security reasons.
A shame that after the support end of the device it will be quite useless, cause you don´t get any security updates and have no chance to make secure again, by flashing something else.
I recommend you not buy any Huaweidevices in the future cause of that.
Disclaimer:
Before you do anything (stupid), backup your data!!!! Don´t make me or others responsible, i warned you!!!!!
If you wan´t to go back to your orginial version some day, you have to backup your OEMinfo!!! Best way to that is via TWRP before the rebranding ( see details of STEP 1)
When using the follwing script, take your time and drink a cup of coffee/tea!!!! First rule, don´t panic!!! Don´t do any (unnecessary) extra steps, while using the script!!!
Be aware that the phone sometimes takes longer for a step to finish, or you get stuck on a certain procedure (maybe depending on your branding). Key is to what to do at this point e.g. how to boot manually into fastboot.
If for some reason you must restart the procedure and factory reset appeared for the step, remember to look for the debugsettings and other mandatory settings.
Please use the orginal cable that came with the device for the rebranding and not some cheap aftermarket stuff. Also make sure you USB-Port has enough power (Might be the case on some notebooks)
70% of the posts/questions here are answered, if you read the gude carefully. So do you´re job and read!!!! Yes, i know it´s a lot to read, but details will maybe save your a**
Make sure you removed security pin from the device and also remove the google-account from the device itself, so you are not triggering googlesecuritysystem on nougat or oreo.
If you have a carrier version of the singleSIM P10 (VTR-L09xxxx) and you want rebrand or debrand it, you have to use the firmware for DualSIM (VTR-L29xxxx), or you SIM won´t be recognized anymore!
The good thing is, after that, you´ll be able to use both SIM or SIM and microSD. The provided HWOTA rom is mainly for the L29. If you want the L09 you have to replace the "update_all_hw.zip" in the update folder. If you not sure how to get, take a look in the Huawei-Forums
From Oreo to Oreo:
1. Download: @AndroidFilehost: HWOTA8_P10_B369a (Oreo) (MD5-Hash: fd330a74d22d2ef55a02bfcfdcea33ee )
All important files are inside this package!!
2. The steps for the this procedure are described here:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
From Nougat To Oreo (or Nougat to Nougat, if you use the older files):
STEP 1 (optional steps for the oeminfo backup are cursive)
1. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!)
The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
If you already unlocked your bootloader with installed twrp you can go to step 2. You don´t have to install TWRP in the following miniguide. the script installs it automatically.
But if you want to backup your system or the OEMinfo you have to do this step.
1. Request an unlock code: https://docs.google.com/forms/d/e/1FAIpQLSeGwoQ44zqykuTfjCQrVP07JOHBYnBcAxAbz9SAVxPTFqMh9g/viewform or contact Huawei via live chat on their site.
It may take some time till you get the code. Hopefully they revamp their old unlocksite in the future, cause using a googleform seems to be temporary solutions anyways.
I also found a nice handy tool, but haven´t testet it yet on the p10 and officially it isn´t yet supported (for now only P20): https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711 If can prove that it´s working for the P10 just leave a comment in the thread here or in the orginal thread.
2 Download Hisuite and install: HiSuite
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. Install the ADB Minimal Installer or ADB and Fastboot for Mac and then restart if you already have the driver installed then skip this step.
5. Download TWRP for the P10
6. Now go to ADB and Fastboot installation directory open ADB folder and open the command window as an administrator
7. Connect your phone to PC and reboot the device into fastboot mode by typing “adb reboot bootloader”.
8. Type “fastboot devices” in command prompt and hit enter, it gives you serial numbers in return means your phone connected properly.
10. To unlock bootloader, type fastboot oem unlock yourunlockkey. Here replace unlock key with the key you got. For example “fastboot oem unlock 1234567890″.
11. If you want TWRP at this point you have to copy the downloaded twrp.img-file into the adb directory and type fastboot flash recovery twrpimage.img If you already have oreo running on your device, you must use this updatepackage and follow the guide <.--instead of twrpimage.img type in the exact filename you´ve downloaded.
12. To restart the system type “fastboot reboot”
13. Boot into TWRP and make a Backup of the "OEMinfo" and/or the system. You should be able to that without any guide, otherwise it´s a big mistake keep reading and following this guide!!!
STEP 2
1. Depending on your variant (You can check with the app firmwarefinder and imei, if the update is approved) use:
@AndroidFilehost: HWOTA_P10_B369a (Oreo) (MD5-Hash: b935a84180565fb1717a46d7337f2d43 )
@AndroidFilehost: HWOTA_P10_B365 (Oreo) (MD5-Hash: dbcd30e157625fc6d709b26d49421bb6 )
@MegaUpload: HWOTA_P10_B360 (Oreo) (MD5-Hash: E75DCD3950517E517865878DF8F21679 )
Be aware, it takes some modifications to the script if you wan´t to rollback to nougat. You´ll find guides here on xda for that. So really be sure if you want the new oreo version.
Also you bootloader may stay unlocked after using the script to update to oreo. You have to relock it manually. Boot in fastboot mode and use: fastboot relock INSERTYOURUNLOCKKEYHERE. After relocking your device will once again do a factory reset.
@MegaUpload: HWOTA_P10_B180 (Nougat) (MD5-Hash: 7E11EE56E83AB98DA4DE03273A6A7633 )
@MegaUpload: HWOTA_P10_B179 (Nougat) (MD5-Hash: 7D133B7484E7B4AABA84BA1284D148EC )
some older versions of the hwota:
@MegaUpload: HWOTA_P10_B164
@MegaUpload: HWOTA_P10_B130
and extract it on your PC or your device SD Card. I recommend using 7zip.
2. Run the update.bat file from a preopended CMD with adminrights, It will ask you if you copied the files. Press any key to continue.
3. Now connect your device and Reboot into Bootloader mode using “Volume Down + Power” or just use “adb reboot bootloader” then press any key.
4. The above step will install TWRP in your device.
5. Now Disconnect USB Cable and turn off your device and use “Volume Up + Power” to enter TWRP.
6. Once you’re in TWRP mode, plug in the USB cable again and press the Enter key on your computer.
7. If your files are saved in the HWOTA folder on the SD card, type 1 and press ENTER and if files are saved in the HWOTA/Update folder on your PC, type 2 and press ENTER. I recommend using the sdcard, cause you avoid problems with cheap cables, driverproblems, etc. Make sure you sdcard is fully working and has no errors.
8. It’ll ask you the update type, again type 1 and press the Enter button twice.
9 Done! Be patient an let it do it thing.
10. If you have any problems booting, i recommend doing an low-level factory reset after.
11. Run the update.bat file as an administrator, It will ask you if you copied the files. Press any key to continue.
12. Now connect your device and Reboot into Bootloader mode using “Volume Down + Power” or just use “adb reboot bootloader” then press any key.
13. The above step will install TWRP in your device.
14. Now Disconnect USB Cable and turn off your device and use “Volume Up + Power” to enter TWRP.
15. Once you’re in TWRP mode, plug in the USB cable again and press the Enter key on your computer.
16. If your files are saved in the HWOTA folder on the SD card, type 1 and press ENTER and if files are saved in the HWOTA/Update folder on your PC, type 2 and press ENTER. I recommend using the harddrive of the pc
17. It’ll ask you the update type, again type 1 and press the Enter button twice.
18. Done! Be patient an let it do it´s thing.
19. If you have any problems booting, i recommend doing an low-level factory reset after.
20. If you are rebranding your device with this method, you have to do the whole "STEP 2" again in order to flash the new system files correctly. Also sometimes the device gets stuck on installing the new system after pushing the big updatefiles via adb. Wait 10min and if nothings happens you have to longpress the power key in order to complete.
21. After the new firmwarefiles have been pushed the device will make a factory reset, if it fails, restart the device while pressing Power+Volume up and factory reset the device from the orginal recovery. If enter TWRP at this point, something went wrong.
After that, you´ll be able to get updates directly from huawei via systemupdate or use the awesome firmware finder from the playstore.
If you wondering how to use the firmware finder, watch this guide and do it step by step: Firmware Finder Tutorial If you don´t want to rebrand/debrand this maybe enough for you!
STEP 3 (Optional Update Method 1)
If you have already unlocked your bootloader und installed TWRP, you can also use this method to install the new system update (Don´t try it if you are running oreo or wan´t to install it!! There is no stable und fully functioning version of TWRP for Oreo yet!!!):
1. Make a complete backup of your current system via twrp and save the backup to sd or your pc.
2. Download one of the Huawei P10_HWOTA files from above, save it on your device and unzip it
3. Navigate to the update folder in the HWOTA-folder and copy the 3 files to your device (sdcard recommended)
4. Now Boot your device into TWRP
5. In TWRP flash "update.zip" and don´t reboot!!!
6. Flash "update_all_hw.zip" and don´t reboot!!!
7. Flash "update_data_public.zip"
6. Wait until all files are flashed
7. Done! Reboot TWRP
STEP 4 (Optional Update Method 2):
1. download and install Firmware Finder
2. start the app and search for the exact model you want to update for example VTR-L29C432
3. Look for an FullOTA package and check with your IMEI if the device is approved, otherwise it won´t install cause huawei hasn´t signed the update for your device (IMEI) yet.
3. hit the button "inapp proxy" and setup the proxy with localhost and port 8080 in your phone´s wifi settings.
4. check for the update in systemupdate-app from huawei on your phone, start the update and pause it quickly (at 1-3%).
5. delete the proxy in your wifi settings.
6. resume the update
7. After successful download your device will reboot and install the update
If it fails there actually 3 reasons:
1. your Wifi is crap
2. you didn´t do the steps correctly
3. the firmware isn´t approved for your device, so be sure to check with imei before
(Maybe) Useful Links:
Team MT
Team MT Firmware Database for VTR-L29C432
New Huawei Multi Tool from TeamMT (Be sure to check it out, it´ll soon support the P10)
Guide for firmware finder (made by Firicel69)
OEMInfo Collections
My Other P10 Plus Thread
[TOOL] TOOL ALL IN ONE (No P10 Support yet, but you can request it)
Tips:
Pressing Power + Volume Down will launch the Fastboot Mode
Pressing Power + Volume Up will launch the Recovery Mode
Pressing Power + Volume Down with connected USB will launch the Fastboot Mode in forcemode (might useful if you can´t boot to the bootloader)
Pressing Power + Volume Down+Up will launch the forced firmwareupdate if you have the suitable updatefiles on your sdcard in a folder named "dload"
Turning your phone off and then pressing Volume Down while pluging in your USB-Cable will launch the Fastboot Mode
This whole thing was only possible because of the hard work of other heros here on xda!!
Mainly its based on the method from mankindtw [Guide] Mate 9 Flash Update Package and Rebrand
Big THX to mankindtw for the script!! Please send him some money, if you can!
Thanks a lot.
I plan to use your method.
Can I change the Chinese version (VTR-AL00) to VTR-L29 version in this way?
sangsaby said:
Thanks a lot.
I plan to use your method.
Can I change the Chinese version (VTR-AL00) to VTR-L29 version in this way?
Click to expand...
Click to collapse
I´m not 100% sure, but in my opionion your VTR-AL00 (should be the china version with playstore) has exactly the same hardware as the VTR-L29. Be sure to backup you system or at least only your oeminfo.
In case you rebranding doesn´t function you can revert back to your orginal version via TWRP. Maybe you should try the 636 instead of the 432, depending on your location.
sangsaby said:
Thanks a lot.
I plan to use your method.
Can I change the Chinese version (VTR-AL00) to VTR-L29 version in this way?
Click to expand...
Click to collapse
Hi, i would like to rebrand to VTR-AL00, can you please send me the oem info of vtr-AL00?
Thank you
yangsong2000 said:
Hi, i would like to rebrand to VTR-AL00, can you please send me the oem info of vtr-AL00?
Thank you
Click to expand...
Click to collapse
Really sure, think about it twice, most people want rebrand their phone to L09 or L29. I makes no sense to rebrand to VTR-L00, the only advantage i see, is that you get updates earlier, but in fact the other variants get really often updates too.
People with VTR-L00 bought their device cheap in china and want to rebrand because of the missing playstore, or thr missing LTE bands.
Here you can see the differences between the variants:
http://consumer.huawei.com/en/phones/p10/specs/
I´m sorry i can´t provide yoo a oeminfo for the VTR-L00.
LwannaCM said:
Really sure, think about it twice, most people want rebrand their phone to L09 or L29. I makes no sense to rebrand to VTR-L00, the only advantage i see, is that you get updates earlier, but in fact the other variants get really often updates too.
People with VTR-L00 bought their device cheap in china and want to rebrand because of the missing playstore, or thr missing LTE bands.
Here you can see the differences between the variants:
http://consumer.huawei.com/en/phones/p10/specs/
I´m sorry i can´t provide yoo a oeminfo for the VTR-L00.
Click to expand...
Click to collapse
Actually in VTR-AL00 you have more features and the updates are faster. Moreover, you can install play store
By the way in case I don't like it, I can go back to European version. But at the moment I want to try VTR-AL00!
Do you know where I can download it or do you know someone who has it?
Thank you
Good day.. i am using this method.. i have one question..
what is this firmware provided?? HWOTA_P10_B164.zip
is it VTR-L29C432 or C636??
thanks!
francisac3 said:
good day.. I am using this method.. I have one question..
What is this firmware provided?? Hwota_p10_b164.zip
is it vtr-l29c432 or c636??
Thanks!
Click to expand...
Click to collapse
vtr-l29c432
Be sure to stick exactly to the steps! After its finished wait at least 15min.
If the device won´t reboot itself, you have to switch it off and maybe make a low level reset via orginal recovery, if you´re stuck in a boot loop.
Happened to me on 1 of 5 flashes.
yangsong2000 said:
Actually in VTR-AL00 you have more features and the updates are faster. Moreover, you can install play store
By the way in case I don't like it, I can go back to European version. But at the moment I want to try VTR-AL00!
Do you know where I can download it or do you know someone who has it?
Thank you
Click to expand...
Click to collapse
Sorry, i couldn´t find a oeminfo for the VTR-AL00
LwannaCM said:
vtr-l29c432
Be sure to stick exactly to the steps! After its finished wait at least 15min.
If the device won´t reboot itself, you have to switch it off and maybe make a low level reset via orginal recovery, if you´re stuck in a boot loop.
Happened to me on 1 of 5 flashes.
Click to expand...
Click to collapse
thanks.. will try this on my vtr-tl00 chinese version.. downloading the file now
Rebrand p10
Hi I have VTR-L29C738B150. It is brand Polish mobile Polkomtel. I want to change to open Europe software. I try to do this like in this post but nothing happened after I am in TWRP and click enter. Please help me.
what happened to the update.bat?? i cant use this.. when i open the update.bat... it only pops up then immediately close
DiMeteo24 said:
Hi I have VTR-L29C738B150. It is brand Polish mobile Polkomtel. I want to change to open Europe software. I try to do this like in this post but nothing happened after I am in TWRP and click enter. Please help me.
Click to expand...
Click to collapse
Maybe you forgot to unplug the cable. Just repeat the steps to this point. If you however get stuck, try to flash a custom rom for the p10 from this section, at least you get your device working again.
Maybe you find a solution here: [Guide] Mate 9 Flash Update Package and Rebrand it´s the same batch from mankindtw, only with files for the p10.
francisac3 said:
what happened to the update.bat?? i cant use this.. when i open the update.bat... it only pops up then immediately close
Click to expand...
Click to collapse
Maybe the update.bat hates you, just kiddin Open a CMD as admin run the update.bat from there. What you describe is a common problem and relates to a lot of other batchfiles
Rebrand P10
LwannaCM said:
Maybe you forgot to unplug the cable. Just repeat the steps to this point. If you however get stuck, try to flash a custom rom for the p10 from this section, at least you get your device working again.
Maybe you find a solution here: [Guide] Mate 9 Flash Update Package and Rebrand it´s the same batch from mankindtw, only with files for the p10.
Click to expand...
Click to collapse
I do all like You say. But I have a problem (I can't do backup in TWRP and while I install TWRP on the end there is a error). Maybe I shoud set something in developer option?
DiMeteo24 said:
I do all like You say. But I have a problem (I can't do backup in TWRP and while I install TWRP on the end there is a error). Maybe I shoud set something in developer option?
Click to expand...
Click to collapse
Please read again everything in Step 1, there lies your answer how to get your TWRP and what to activate in developersettings. This step has nothing to do with the update.bat and is absolutely crucial and mandatory.
After installing TWRP the official way, make a backup and continue.
Rebrand P10
LwannaCM said:
Please read again everything in Step 1, there lies your answer how to get your TWRP and what to activate in developersettings. This step has nothing to do with the update.bat and is absolutely crucial and mandatory.
After installing TWRP the official way, make a backup and continue.
Click to expand...
Click to collapse
I will show you where is the problem.
when I boot in fastboot I see something like this:
replace recovery to TVRP
target reported........
sending recovery........
OKEY
writing recovery.....
FAILED <remote:Command not allowed>
finished
after this I do all with volume up+power and nothing happened
DiMeteo24 said:
I will show you where is the problem.
when I boot in fastboot I see something like this:
replace recovery to TVRP
target reported........
sending recovery........
OKEY
writing recovery.....
FAILED <remote:Command not allowed>
finished
after this I do all with volume up+power and nothing happened
Click to expand...
Click to collapse
O.K. now i understand, did you set OEM-Unlocking in Developer Options? It seems like you have a locked FRP and your device doesn´t allow flashing the custom recovery.
Someone already had this problem on the Mate 9:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page56
LwannaCM said:
O.K. now i understand, did you set OEM-Unlocking in Developer Options? It seems like you have a locked FRP and your device doesn´t allow flashing the custom recovery.
Someone already had this problem on the Mate 9:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page56
Click to expand...
Click to collapse
I have FRP lock but I cant set OEM unlocking in developer option because it is grey (non active)
DiMeteo24 said:
I have FRP lock but I cant set OEM unlocking in developer option because it is grey (non active)
Click to expand...
Click to collapse
K, now we are talking. Only thing you can do is flash your rom back to stock the semi-official way:
Download the firmware finder from the playstore.
Search for your device (not the one you want rebrand to) and check with IMEI in Firmware Finder just to be sure. Here you have a guide: Firmware Finder Tutorial
If you prefer reading, you can also follow this: https://forum.xda-developers.com/p10/how-to/guide-update-p10-via-firmware-finder-app-t3674477
Then you should be back to normal. When it´s finished you can try again, just be really sure following the steps and do no extra steps!! ....for Instance wiping something after you installed TWRP
You can try the dload method instead, but i recommend doing it via firmwarefinder, simply cause it will work.
A2017X DFU MultiDL Tool…The Ultimate DFU to EDL Mode Unbrick Tool
DFU bricked ??....It seems opening the phone is history....
DFU bricked ??....Throw away that EDL Cable....
My friend @Aviver saw this post on myzte.cn : http://www.myzte.cn/thread-356482-1-1.html
@Teet1 linked us the download and @Aviver could test it on his bricked DFU phone and guess...IT WORKED !!!
A) How To : Follow the setup here and read a more in depth review of @AnonVendetta HERE
B) Tool : New ZTE DFU_MultiDL_A2017X_Tool.exe ( english setup )
Free translation :
[B][A2017 save brick] official tools to save brick to the DFU mode free disassemble into the 9008[/B]
today to help the Friends group @ Chi Feng Lan Moon Shadow shoes cracked a flash tool.
After selecting the port with software, DFU can actually enter 9008, preventing brick.
After entering 9008, you can switch to miflash or Qualcomm qpst.
Of course, this software can also be used directly for flashing.
1. Connect the mobile phone to the computer, recommend the system Windows 7, install ZTE's own driver package, 9008 driver package (miflash comes with), miflash brush tool (alternate) . Install the provided SalesMultiDL_A2017 tool (this is the official after-sales tool, provided by the netizen, invade and delete), and find the installation directory, the patch file is overwritten by the main program, and the crack is completed.
2. Press and hold the power button to decrease the volume to enter the factory mode. If you can't boot directly, skip this step in dfu mode.
3. According to the help file of the software, view and select the port. Displaying “Connected” means that the machine is recognized. Click the green play button to start, observe the restart of the mobile phone, and disconnect the data cable to enter the port 9008. This step may be different, there are also cases where you select the port directly into the 9008. You must observe the port of the computer device manager in the form of dfu or edl 9008, 4. After entering 9008, theoretically select the installation package from below and click on the green player. The button can start to brush, here ZTE official line brush package is not available. So this step turns off the software and changes to the miflash brush package to try to brush. -------------------------------------------------- ----- Other ways to enter the 9008 port: 1. In the early version, press and hold the power button and the volume up and down buttons simultaneously. 2, you can enter the system or twrp, computer command line mode, adb shell reboot edl. 3, can not boot, search for millet engineering line production method to make millet engineering line to enter. 4. Disassemble the test point to enter 9008. This method can be replaced by the tool provided in this post.
Progress?
Working on it. I managed to get an account made for the site! :victory: Only to find out you also have to be in a certain user group to be able to download. The site uses a point system to determine what user group you have access to. To get point you basically have to spend time on, and do things in the site. So that's where I'm at.
millerz said:
Working on it. I managed to get an account made for the site! :victory: Only to find out you also have to be in a certain user group to be able to download. The site uses a point system to determine what user group you have access to. To get point you basically have to spend time on, and do things in the site. So that's where I'm at.
Click to expand...
Click to collapse
Thnx. Also having an account there but we have the same problem. That's why someone who's more regularly on these sites could help.
raystef66 said:
Thnx. Also having an account there but we have the same problem. That's why someone who's more regularly on these sites could help.
Click to expand...
Click to collapse
You could also download it via the Baidu link. Someone just posted it but you have to register for Baidu. I have a registered account there (had to jump through some hoops) but I've managed to download it for you so no one else has to do the same. The download was also painfully slow. Here you go:
https://www.dropbox.com/s/tlrsf4erdnbzsnv/SalesMultiDL_A2017_Crack.7z?dl=0
Create a new thread on it if you like for a guide! This will be extremely useful for permanent bricks. Nice find :good:
Teet1 said:
You could also download it via the Baidu link. Someone just posted it but you have to register for Baidu. I have a registered account there (had to jump through some hoops) but I've managed to download it for you so no one else has to do the same. The download was also painfully slow. Here you go:
https://www.dropbox.com/s/tlrsf4erdnbzsnv/SalesMultiDL_A2017_Crack.7z?dl=0
Create a new thread on it if you like for a guide! This will be extremely useful for permanent bricks. Nice find :good:
Click to expand...
Click to collapse
Most appreciated !
If this tool works this will be a major help into unbricking our A7.
Will keep you informed
raystef66 said:
Most appreciated !
If this tool works this will be a major help into unbricking our A7.
Will keep you informed
Click to expand...
Click to collapse
Make good use of it. I had to download it over night! I have a 300 mbps connection but since the download was in China it wanted to download at 50-100 kpb/s. Keep us well informed!
Teet1 said:
Make good use of it. I had to download it over night! I have a 300 mbps connection but since the download was in China it wanted to download at 50-100 kpb/s. Keep us well informed!
Click to expand...
Click to collapse
Yeah, I know someone who's waiting for his EDL cable.....:cyclops:
GOOD NEWS FOR EVERYONE !!!!
When your phone is in DFU and nothing seems to work to get EDL to work and connect to 9008.....seems that this tool, once it is installed, running and connected to your phone, you just have to close the program and open MIFLASH to flash your EDL....THAT SIMPLE !
Hereby a quick guide :
1. Download the tool DFU_MultiDL_A2017_tool or from dropbox thnx @Teet1 for his initial upload !
2. Extract the 7z
3. Install the setup.exe (it's in chinese but just follow the '>' and you'll be ok
4. once done, replace the ZTE_Sales_Update_Framework within the program folder on your drive
4a how to get english program UI (until we have a new english setup.exe ready)
Connect your phone
5. Start the program and follow the pictures down below
5.1 Only work with the left button, tap on it and select the first option
5.2 You have to see to which port your phone is connected to, remember that one and choose that one out of the list on 1--USB
5.3 Apply that choice using the right button below
6. After you succesfully noticed your phone was connected, close the program and open Miflash....you should be able to flash an EDL rom again
That's the way @Aviver did re-aviver-ed his phone in DFU mode...that simple !
Seems like the axon7 should be unblickable now
raystef66 said:
GOOD NEWS FOR EVERYONE !!!!
When your phone is in DFU and nothing seems to work to get EDL to work and connect to 9008.....seems that this tool, once it is installed, running and connected to your phone, you just have to close the program and open MIFLASH to flash your EDL....THAT SIMPLE !
Hereby a quick guide :
1. Download the tool DFU_MultiDL_A2017_tool or from dropbox thnx @Teet1 for his initial upload !
2. Extract the 7z
3. Install the setup.exe (it's in chinese but just follow the '>' and you'll be ok
4. once done, replace the ZTE_Sales_Update_Framework within the program folder on your drive
Connect your phone
5. Start the program and follow the pictures down below
5.1 Only work with the left button, tap on it and select the first option
5.2 You have to see to which port your phone is connected to, remember that one and choose that one out of the list on 1--USB
5.3 Apply that choice using the right button below
6. After you succesfully noticed your phone was connected, close the program and open Miflash....you should be able to flash an EDL rom again
That's the way @Aviver did re-aviver-ed his phone in DFU mode...that simple !
Seems like the axon7 should be unblickable now
Click to expand...
Click to collapse
This is revolutionary stuff, really! Wish it'd come out before I had to open my phone a a month ago. Now I have some regrettable scuffs around the speaker grills on an otherwise spotless device ?
raystef66 said:
GOOD NEWS FOR EVERYONE !!!!
When your phone is in DFU and nothing seems to work to get EDL to work and connect to 9008.....seems that this tool, once it is installed, running and connected to your phone, you just have to close the program and open MIFLASH to flash your EDL....THAT SIMPLE !
Hereby a quick guide :
1. Download the tool DFU_MultiDL_A2017_tool or from dropbox thnx @Teet1 for his initial upload !
2. Extract the 7z
3. Install the setup.exe (it's in chinese but just follow the '>' and you'll be ok
4. once done, replace the ZTE_Sales_Update_Framework within the program folder on your drive
Connect your phone
5. Start the program and follow the pictures down below
5.1 Only work with the left button, tap on it and select the first option
5.2 You have to see to which port your phone is connected to, remember that one and choose that one out of the list on 1--USB
5.3 Apply that choice using the right button below
6. After you succesfully noticed your phone was connected, close the program and open Miflash....you should be able to flash an EDL rom again
That's the way @Aviver did re-aviver-ed his phone in DFU mode...that simple !
Seems like the axon7 should be unblickable now
Click to expand...
Click to collapse
You can replace the Chinese language files in the tool installation directory with the English files in the same directory.
Replace "\Resource\Locales\ZH_CN\DL_WCDMA.lang" with "\Resource\Locales\US_EN\DL_WCDMA.lang".You'll get a full version of English.
raystef66 said:
Hi,
My friend @Aviver saw this post on myzte.cn : http://www.myzte.cn/thread-356482-1-1.html
@Teet1 linked us the download and @Aviver could test it on his bricked DFU phone and guess...IT WORKED !!!
Follow the setup here
It seems opening the phone is history....
Free translation :
[B][A2017 save brick] official tools to save brick to the DFU mode free disassemble into the 9008[/B]
today to help the Friends group @ Chi Feng Lan Moon Shadow shoes cracked a flash tool.
After selecting the port with software, DFU can actually enter 9008, preventing brick.
After entering 9008, you can switch to miflash or Qualcomm qpst.
Of course, this software can also be used directly for flashing.
1. Connect the mobile phone to the computer, recommend the system Windows 7, install ZTE's own driver package, 9008 driver package (miflash comes with), miflash brush tool (alternate) . Install the provided SalesMultiDL_A2017 tool (this is the official after-sales tool, provided by the netizen, invade and delete), and find the installation directory, the patch file is overwritten by the main program, and the crack is completed.
2. Press and hold the power button to decrease the volume to enter the factory mode. If you can't boot directly, skip this step in dfu mode.
3. According to the help file of the software, view and select the port. Displaying “Connected” means that the machine is recognized. Click the green play button to start, observe the restart of the mobile phone, and disconnect the data cable to enter the port 9008. This step may be different, there are also cases where you select the port directly into the 9008. You must observe the port of the computer device manager in the form of dfu or edl 9008, 4. After entering 9008, theoretically select the installation package from below and click on the green player. The button can start to brush, here ZTE official line brush package is not available. So this step turns off the software and changes to the miflash brush package to try to brush. -------------------------------------------------- ----- Other ways to enter the 9008 port: 1. In the early version, press and hold the power button and the volume up and down buttons simultaneously. 2, you can enter the system or twrp, computer command line mode, adb shell reboot edl. 3, can not boot, search for millet engineering line production method to make millet engineering line to enter. 4. Disassemble the test point to enter 9008. This method can be replaced by the tool provided in this post.
Click to expand...
Click to collapse
This is a god send! Saved me from a DFU brick! Thanks to all involved!
English version update
Replace the lan_CHN.ini in your program folder under bin/languages
(or just change the name 'lan_ENG' into 'lan_CHN' and remove the original lan_CHN.ini)
or use ZTE DFU_MultiDL_A2017 Tool (English Version) - extract and replace all the files to your existing program folder thnx @millerz for his work :good:
(or extract it to your desktop and double tap the ZTE_Sales_Update_Framework.exe - that should work too)
If anyone has the time to change the whole setup.exe file to begin the install-setup in english and change the tool UI in english, feel free to upload it here
This is a great thing to have now that the Axon 7 is probably on its last leg of support.
This is absolutely incredible. I've had a DFU'd A2017G before from trying to install LOS 15.1 by following the guide on their OP. Thank you!
Not working for me, unfortunately. My A2017U is DFU. When I run this program, everything looks like it's working. It finds the phone, and then the PC will recognize it as 9008. MiFlash will even flash an EDL package, and say it's a success. But when I reboot the phone, it's still not working. I can still only boot into DFU.
I've tried multiple USB ports, installed the program a couple different ways, and tried 3 or 4 different EDL packages. Any ideas?
EDIT: Mine always says "connect state - disconnected," but it seems to force Windows to recognize the phone as 9008. Coul this be part of the issue?
This saved my ass. Used the English version with ease. Cannot thank everyone involved with this enough.
privatedoodle said:
Not working for me, unfortunately. My A2017U is DFU. When I run this program, everything looks like it's working. It finds the phone, and then the PC will recognize it as 9008. MiFlash will even flash an EDL package, and say it's a success. But when I reboot the phone, it's still not working. I can still only boot into DFU.
I've tried multiple USB ports, installed the program a couple different ways, and tried 3 or 4 different EDL packages. Any ideas?
EDIT: Mine always says "connect state - disconnected," but it seems to force Windows to recognize the phone as 9008. Coul this be part of the issue?
Click to expand...
Click to collapse
As of what I read the main part is working, that is reconnecting 9008 able to flash an EDL. That's the main goal.
The edl flash seems to be successful as I understand so that's strange... Anyway, did you try the @djkuz edl tool and flash an edl out of his range of U-roms?
KwesiJnr said:
This is revolutionary stuff, really! Wish it'd come out before I had to open my phone a a month ago. Now I have some regrettable scuffs around the speaker grills on an otherwise spotless device
Click to expand...
Click to collapse
HAHA I feel you brother. I bricked my axon 7 after barely getting it replaced through ZTE's advanced exchanged. It was perfect condition, but now the speaker grills are ugly on the corners where I tried to remove them. Getting speaker grills on AliExpress though.
endrew360 said:
HAHA I feel you brother. I bricked my axon 7 after barely getting it replaced through ZTE's advanced exchanged. It was perfect condition, but now the speaker grills are ugly on the corners where I tried to remove them. Getting speaker grills on AliExpress though.
Click to expand...
Click to collapse
Really? Did you find any at all? Please send a link. I have searched a few times (on AliExpress) but to no avail. Closest one I came to was eBay, but the seller doesn't ship to my country.
raystef66 said:
As of what I read the main part is working, that is reconnecting 9008 able to flash an EDL. That's the main goal.
The edl flash seems to be successful as I understand so that's strange... Anyway, did you try the @djkuz edl tool and flash an edl out of his range of U-roms?
Click to expand...
Click to collapse
I had been using MiFlash, but I switched over and tried the @djkuz tool. Failed again. The log says it "failed to open com port." Is this a driver issue, or something else? I've reinstalled the qualcomm drivers, but maybe I'm missing some other piece?
Screenshots here:
https://imgur.com/a/1P3YCuR