Platform-Tools
Windows - Mac OS - Linux
Drivers
Windows 64 Bit - 32 Bit - Mac OS
Zip
Stock Firmware (Android 11) - Bootloader Unlock
GSI ROM (PixelExperience_Plus_arm64-ab-11.0-20211011-UNOFFICIAL.img.xz)
product_gsi.img
Root Magisk (rename the .apk file extension to .zip) installing using recovery OrangeFoxR11.1 - twrp_3.6.1-11-0
****COMMAND****
flash stock - flash gsi
adb reboot bootloader
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot flash super super.img_sparsechunk.11
fastboot flash super super.img_sparsechunk.12
fastboot flash super super.img_sparsechunk.13
fastboot flash super super.img_sparsechunk.14
fastboot flash super super.img_sparsechunk.15
fastboot erase carrier
fastboot erase userdata
fastboot erase metadata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot reboot
exit
adb reboot fastboot
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot flash product product_gsi.img
fastboot flash boot boot2.img
fastboot flash system pixel.img
fastboot flash recovery recovery2.img
fastboot -w
fastboot reboot
exit
Click to expand...
Click to collapse
Spoiler
- boot boot2.img and recovery recovery2.img <---- optional
- fastboot flash system pixel.img <---- rom-name
Procedure to install the GSI custom ROM
- Extract Platform Tools + Stock Firmware + GSI ROM + gsi product (in the same folder) and launch commands, easy
List + GSI
II'm test before, thanks
Si alguien lo prueba para hacerle saber cómo le está yendo
I've already tried it and it can't install the rom, I don't know if I'm executing the command wrong or what, but it didn't work for me.
Kira565 said:
I've already tried it and it can't install the rom, I don't know if I'm executing the command wrong or what, but it didn't work for me.
Click to expand...
Click to collapse
1. https://mirrors.lolinet.com/firmware/moto/astro/official/
2. Ctrl + F download rom "RPL31" (RPLS31, not)
3. After you install the Stock ROM and the device starts correctly, activate usb debugging and execute these commands:
adb reboot fastboot
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot flash product product_gsi.img
fastboot flash system ROM.img
fastboot -w
fastboot reboot
exit
Por favor de um jeito pelo Orange Fox sem PC
Alexsjvr1 said:
Melhor da um jeito pelo Orange Fox sem utilização de PC por favor
Click to expand...
Click to collapse
Alexsjvr1 said:
1. https://mirrors.lolinet.com/firmware/moto/astro/official/
2. Ctrl + F download rom "RPL31" (RPLS31, not)
3. After you install the Stock ROM and the device starts correctly, activate usb debugging and execute these commands:
adb reboot fastboot
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot flash product product_gsi.img
fastboot flash system ROM.img
fastboot -w
fastboot reboot
exit
Click to expand...
Click to collapse
thanks bro I already tried several I am currently on corvus gsi
Alexsjvr1 said:
Hello! How are you? This is my first post on this page, and I wanted to share the method to install GSI ROM on this One Fusion, I do it at the request of a friend
It is a simple process that does not take more than 15 minutes, come on! !
SDK tools platform 7-Zip
Windows - Mac OS - Linux
Windows Drivers 64 Bit 32 Bit - Mac OS
Stock Firmware (Android 11) - Bootloader Unlock
GSI ROM (PixelExperience_Plus_arm64-ab-vndklite-11) - product_gsi.img
Magisk (rename the .apk file extension to .zip) installing using custom recovery
or you can try this already patched image magisk_patched
COMMAND
Spoiler
- boot boot2.img and recovery recovery2.img <---- optional
- fastboot flash system pixel.img <---- rom-name
Procedure to install the GSI custom ROM
- Extract Platform Tools + Stock Firmware + GSI ROM + gsi product (in the same folder) and launch commands, easy
Here is a link that I find interesting to share for those who have not yet decided which rom to install 15 best custom ROMs
Click to expand...
Click to collapse
its faster and stable, but the multimedia audio via Bluetooth does not work.
In Logcat... Bluetooth is crazy and has battery drain... the rom needs a FIX.
I RECOMMEND CrDroid GSI ctrl+f (-arm64-bgZ-lite.img.xz)
crDroid.net - increase performance and reliability over stock Android for your device
official crDroid ROM blog
crdroid.net
The Open GApps Project
OpenGApps.org offers information and pre-built packages of The Open GApps Project. The Open GApps Project is an open-source effort to script the automatic generation of up-to-date Google Apps packages. All Android versions and platforms supported.
opengapps.org
reddermanu said:
its faster and stable, but the multimedia audio via Bluetooth does not work.
In Logcat... Bluetooth is crazy and has battery drain... the rom needs a FIX.
Click to expand...
Click to collapse
You can fix the bluetooth media audio disabling the A2DP offload in PHH settings, I have also experienced the battery drain issue on most GSIs, try to stick to AOSP as I haven't met any battery drain there.
reddermanu said:
its faster and stable, but the multimedia audio via Bluetooth does not work.
In Logcat... Bluetooth is crazy and has battery drain... the rom needs a FIX.
Click to expand...
Click to collapse
Solution to Bluetooth connection problem
To fix the Bluetooth connection problem, simply go to Settings/PHH Treble Settings/Misc Features and check the Force-disable A2DP offload option. Then, restart the phone.
KUATIKO said:
I RECOMMEND CrDroid GSI ctrl+f (-arm64-bgZ-lite.img.xz)
crDroid.net - increase performance and reliability over stock Android for your device
official crDroid ROM blog
crdroid.net
The Open GApps Project
OpenGApps.org offers information and pre-built packages of The Open GApps Project. The Open GApps Project is an open-source effort to script the automatic generation of up-to-date Google Apps packages. All Android versions and platforms supported.
opengapps.org
Click to expand...
Click to collapse
crDroid exelent option
I got the following error when I executed the command fastboot flash system image:
target reported max download size of 536870912 bytes
Invalid sparse file format at header magic
sending sparse 'system_a' 1/6 (524212 KB)...
OKAY [ 13.213s]
writing 'system_a' 1/6...
OKAY [ 2.874s]
sending sparse 'system_a' 2/6 (518272 KB)...
OKAY [ 13.113s]
writing 'system_a' 2/6...
FAILED (remote: Operation not permitted)
finished. total time: 31.563s
Click to expand...
Click to collapse
The bootloader is unlocked and I flashed the stock rom as described on tutorial.
lteixeiramnc said:
I got the following error when I executed the command fastboot flash system image:
The bootloader is unlocked and I flashed the stock rom as described on tutorial.
Click to expand...
Click to collapse
@lteixeiramnc you must use the latest version of fastboot https://developer.android.com/studio/releases/platform-tools.
crdroid is the best https://sourceforge.net/projects/tr...om-v316-220330-arm64-bgZ-lite.img.xz/download
disable the A2DP offload in PHH settings!
Alexsjvr1 said:
Hello! How are you? This is my first post on this page, and I wanted to share the method to install GSI ROM on this One Fusion, I do it at the request of a friend
It is a simple process that does not take more than 15 minutes, come on! !
SDK tools platform - 7-Zip
Windows - Mac OS - Linux
Windows Drivers 64 Bit 32 Bit - Mac OS
Stock Firmware (Android 11) - Bootloader Unlock
GSI ROM (PixelExperience_Plus_arm64-ab-vndklite-11) - product_gsi.img
Magisk (rename the .apk file extension to .zip) installing using custom recovery
or you can try this already patched image magisk_patched
COMMAND
Spoiler
- boot boot2.img and recovery recovery2.img <---- optional
- fastboot flash system pixel.img <---- rom-name
Procedure to install the GSI custom ROM
- Extract Platform Tools + Stock Firmware + GSI ROM + gsi product (in the same folder) and launch commands, easy
Here is a link that I find interesting to share for those who have not yet decided which rom to install 15 best custom ROMs
Click to expand...
Click to collapse
@dpkg-i-foo-deb @Alexsjvr1 masters!
can i install a android12 gsi??
latest pixelexperience for example?
reddermanu said:
@dpkg-i-foo-deb @Alexsjvr1 masters!
can i install a android12 gsi??
latest pixelexperience for example?
Click to expand...
Click to collapse
Yes+info: https://teletype.in/@syoker/XT2073-FlashGSIROM_EN
Alexsjvr1 said:
Yes+info: https://teletype.in/@syoker/XT2073-FlashGSIROM_EN
Click to expand...
Click to collapse
@Alexsjvr1 best android 12 gsi rom for astro? help with link... I don't know which one to download
reddermanu said:
@Alexsjvr1 best android 12 gsi rom for astro? help with link... I don't know which one to download
Click to expand...
Click to collapse
These are the most used:
Pixel Experience Plus
Release Pixel Experience Plus 12.1 v412 · ponces/treble_build_pe
Initial PE+ build Sync with April sources of PE+ Sync with AOSP 12.1 v412 (thanks @phhusson) Clean flash is not required if coming from normal version!
github.com
SuperiorOS
xiaomemeindex.com
CorvusOS
Tipz Team Builds - Browse /GSIs/CorvusROM/Beta/20220423 at SourceForge.net
sourceforge.net
crDroid
Gsi_projects - Browse /v412/crDroid-8.4 at SourceForge.net
sourceforge.net
Alexsjvr1 said:
These are the most used:
Pixel Experience Plus
Release Pixel Experience Plus 12.1 v412 · ponces/treble_build_pe
Initial PE+ build Sync with April sources of PE+ Sync with AOSP 12.1 v412 (thanks @phhusson) Clean flash is not required if coming from normal version!
github.com
SuperiorOS
xiaomemeindex.com
CorvusOS
Tipz Team Builds - Browse /GSIs/CorvusROM/Beta/20220423 at SourceForge.net
sourceforge.net
crDroid
Gsi_projects - Browse /v412/crDroid-8.4 at SourceForge.net
sourceforge.net
Click to expand...
Click to collapse
thank for the direct linksssssss
[Guide] Root Pixel 6 with Magisk + Unlock Bootloader + Pass SafetyNet + More
Android Security Bulletin—June 2023
Pixel Update Bulletin—June 2023
Introduction
This Guide is for Pixel 6 owners that want to Root their phone, and enjoy the benefits of rooting it. The Guide is divided into three parts: Information, Instructions, and Other.
~ ~ ~ Part I - INFORMATION ~ ~ ~
Disclaimer
I assume no responsibility for the malfunctioning/bricking of your phone.
If you choose to use a Custom Kernels, Custom ROM, etc. You should read the Installation Instructions in their thread before using this guide or attempting to install them. Additionally, the order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting them
.
Prerequisites
A Pixel 6 phone with an unlocked bootloader.
The latest Android 13 Factory or OTA Image: "oriole" for Pixel 6
Factory Image
a. 13.0.0 (TQ3A.230605.010, Jun 2023)b. 13.0.0 (TQ3A.230605.010.A1, Jun 2023, T-Mobile, T-Mobile MVNOs)c. Which one should I use?
OTA Image
a. 13.0.0 (TQ3A.230605.010, Jun 2023)b. 13.0.0 (TQ3A.230605.010.A1, Jun 2023, T-Mobile, T-Mobile MVNOs)c. Which one should I use?
A Computer with the latest working SDK Platform-tools 33.0.3 installed.
Important Notes:
a. Before installing SDK Platform-tools, check for older versions of fastboot on your computer: Open a Command prompt and type fastboot --version at the prompt. If a adb/fastboot is found delete the folder containing them. Also, check the path environment for paths to them and remove it.
b. Update Platform Tools, regularly, for optimal performance.
c. Need Google's USB Drivers for your Pixel Phone?
NEW
Both Slots Bootable
@badabing2003 has found a way to Have both slots bootable.
He has automated the procedure and added it to PixelFlasher.
@Lughnasadh tested the Both Slots Bootable procedure on his Google Pixel 7 Pro and Google Pixel 6 Pro phones: It works!
Android 14 Beta are up.
Builds are only available for the following Pixel devices:
Google Pixel 4a5(G)
Google Pixel 5 and 5a
Google Pixel 6 and 6 Pro
Google Pixel 6a
Google Pixel 7 and 7 Pro
* * * 64-bit-only system images * * *
Google Pixel 4a (5G)
Google Pixel 5
Google Pixel 6
Google Pixel 6 Pro
Android 14 GSI binaries and release
Pixel 4a5(G)
Pixel 5 and 5a
Pixel 6 and 6 Pro
Pixel 6a Pro
Pixel 7 and 7 Pro
Update(s)
Factory/OTA Images - 13 June
Android 14 DP
Factory images and OTA images
Android 14 GSI binaries and release
Magisk Alpha - app-release_709f25f6-26101.apk 12 Apr
Magisk Beta - Magisk v26.1.apk 11 Apr
Magisk Canary - app-release_a8c4a33e-26103.apk 23 Jun
Magisk Cygisk - Click Pages 5 for installation Instructions.
Magisk Delta -
app-release
Magisk Stable - Magisk v26.1.apk 11 Apr
SafetyNet - Displax's SafetyNet Fix, v2.4.0-MOD_1.3 17Jun
SDK Platform-tools 33.0.3 Aug 2022
Custom Kernels
a. Google Pixel 6 Pro ROMs, Kernels, Recoveries, & Otherb. ElementalX Kernel Manager
My Other Guides
Pixel 7 Pro
Pixel 5
Pixel 4a (5G)
Pixel 4 XL
Pixel 3 XL
Pixel 1 XL
Credits/Thanks/Recognitions
@topjohnwu - Magisk.
vvb2060 - Magisk alpha.
Those I may have, inadvertently, forgotten.
~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~
(The Instructions listed below are not steps, they are individual sets of instructions.)
Unlock Bootloader/Return Phone to Stock/Lock Bootloader
Unlock Bootloader
This will erase all user data from the device!
Backup your data
Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
When your phone reboots disconnect your usb cable.
Notes: After unlocking your bootloader, you'll see a warning: The bootloader is unlocked and... You will see this warning until, you relock the bootloader.
Do not relock your bootloader until you have returned the device to Stock.
Return Phone to Stock
Backup your data/Internal storage
Use the Android flash tool:
select Wipe => Force Flash Partitions => Lock Bootloader.
Lock Bootloader
If your phone is not 100 percent stock do Return Phone to Stock. If you don't you may brick your phone.
This will erase all user data from the device!
Boot fastboot mode
Open a Command Prompt and type this at the Prompt: fastboot flashing lock
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete, then type this at the Command Prompt: fastboot reboot
Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
Tap Back > Developer options and toggle OEM Unlock off.
Manually Install/Update Factory Image keep data or wipe data.
Important Note(s):
If you haven't updated your phones Factory image in awhile. It is not necessary to flash all the missed images in succession. Flash the latest Factory image.
If your phone was previously rooted, open Magisk manager and disable all Magisk modules. If you hid the Magisk manager app the default name for the hidden Magisk app is settings.
If you are uncomfortable manually flashing the factory image. Try PixelFlasher by badabing2003.
"Updating Pixel 6, Pixel 6 Pro, and Pixel 6a devices to Android 13 for the first time
Warning: The Android 13 update for Pixel 6, Pixel 6 Pro, and the Pixel 6a contains a bootloader update that increments the anti-roll back version for the bootloader. This prevents the device from rolling back to previous vulnerable versions of the bootloader. After flashing an Android 13 build on these devices you will not be able to flash and boot older Android 12 builds. For developers who need to develop and test against an Android 12 environment, a special Developer Support Build that contains the bootloader update should be used.
After taking an Android 13 update and successfully booting the device post update, an Android 12 build resides in the inactive slot (seamless updates for more information on slots) of the device. The inactive slot contains an older bootloader whose anti-rollback version has not been incremented. If the active slot is then flashed with a build that fails to boot, the fallback mechanism of seamless updates kicks in and the device tries to boot from the inactive slot. Since the inactive slot contains the older bootloader, the device enters an unbootable state.
To avoid hitting this state, if you are flashing a Pixel 6, Pixel 6a, or Pixel 6 Pro device with an Android 13 build for the first time, please flash the bootloader partition to the inactive slot"...
If you want to update to the Android 13 Factory image without wiping your phone: Do Flash Factory Image Keep Data (below).
Always verify you have the latest working version of SDK Platform-Tools installed on your computer before installing the Factory Image: Pixel 6 - oriole.
If you get an error while flashing, try one of these options:
Change the USB port to a non charging USB port.
Change the USB cord.
Change Computers.
If you phone bootloops
Press the Power button until the phone turns off.
Press the Power and Volume Down to boot the bootloader.
Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
then type
fastboot Reboot
Backup your data
Download the latest Factory Image: Pixel 6 - oriole to your Computer.
Go to Part II - INSTRUCTIONS => 4. Extract Files from the FactoryImage/Flash boot.img and extract the flash-all.bat file.
Flash Factory Image Keep Data
Upgrading to Android 13
* E D I T - flash-all.bat file *
Flash to current/Active Slot.
@Echo off
PATH=%PATH%;"%SYSTEMROOT%\System32"
fastboot flash bootloader bootloader-oriole-slider-9.9-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot flash radio radio-oriole-a9999a-999999-999999-a-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot [update image-oriole-aa9a.999999.999.zip
Note:The -w is removed to Keep Data.
echo Press any key to exit...
pause >nul
exit
Note: It is a good idea to flash the Google factory image to both slots (A & B) when Upgrading to new Android Version.
See Flash Other Slot bat file... below, to flash to the other/inactive slot.
* * * * E N D - Edit * * * *
Updating Android 13
Flash to Other/Inactive Slot.
Note: See Flash Other Slot bat file... below.
* * * * Create - Flash Other Slot bat file * * * *
Save Flash Other Slot bat file - as flash-other.bat
Note: To run this file type flash-other at the Command Prompt.
ECHO OFF
PATH=%PATH%;"%SYSTEMROOT%\System32"
echo This is the slot you are currently on.
fastboot getvar current-slot
echo Press any key to continue...
pause >nul
fastboot --set-active=other
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
echo This is the slot you switched to.
fastboot getvar current-slot
echo Press any key to continue...
pause >nul
flash-all
exit
* * E N D - Creating File * *
After, you have edited the flash-all.bat file. Copy/Move these files to the Platform-tools folder:
bootloader-oriole-....img
flash-all.bat
image-oriole-....zip
radio-oriole-....img
On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
Connect your phone to the computer.
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is completed.
Go-to Part II - INSTRUCTIONS => 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
Flash Factory Image Wipe Data
This will wipe your phone's Data/Internal Storage.
Do not edit the flash-all.bat file.
If you need to disable Verity and Verification: See Disabling Verity and Verification below.
Disabling Verity and Verification
* E D I T - flash-all.bat file *
@Echo off
PATH=%PATH%;"%SYSTEMROOT%\System32"
fastboot --set-active=other
fastboot reboot-bootloader
fastboot flash bootloader bootloader-oriole-slider-9.9-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot flash radio radio-oriole-a9999a-999999-999999-a-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot - w update --disable-verity --disable-verification image-oriole-aa9a.999999.999.zip
echo Press any key to exit...
pause >nul
exit
Notes:
The first time you Disable Verity and Verification it will wipe your Data/Internal Storage.
When doing Subsequent updates and disabling Verity and Verification, the -w flag can be removed to Keep Data.
Once you start Disabling Verity and Verification you should continue doing it. If you skip disabling one time. The next time you Disable Verity and Verification it will wipe your phone.
Some kernels require Disabling verity and verification
To flash both slots (A & B partitions) see Flash Other Slot bat file... above.
* * * * E N D - Edit * * * *
Open the folder you extracted the Factory Image to and Copy/Move these files to the Platform-tools folder:
android-info.txt
bootloader-oriole-....img
flash-all.bat
image-oriole-....zip
radio-oriole-....img
On your phone: Boot the bootloader (fastboot mode) (Power off the phone => Press the Power and Down buttons until you see Start)
Connect your phone to the computer.
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is complete.
Setup phone
Enable Developer Mode and USB Debugging
Setup => About phone => Tap Build number 7 times or untill you see you are a 'Devloper'.
Setup => System => Developer options => Enable Developer options => enable USB Debugging
Go-to Part II - INSTRUCTIONS => 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
(NEW) Make Both Slots Bootable: Manually, Flash the OTA Image to Both Slots - One bootable and rooted, the other slot bootable without root.
Before you start
Backup your data
Make sure that there is no pending OTA update, by going to Settings > About phone > System updates, which should say Your system is up to date.
Download the latest Factory and OTA image for your device.
Verify the checksum of the Factory and OTA image. The last portion of the filename is the first 8 digits of its SHA-256 checksum; the full SHA-256 checksum is shown next to the download link.
Extract the boot.image from the Factory image:
Extract the Factory Image file that you downloaded (oriole-a9a9a.999999.999-factory-99a9a99a.zip) into a folder.
Open the folder you extracted the Factory image to and extract the Image file (image-oriole-aa9a.999999.999.zip) into a folder. The stock boot.img file should be in this folder.
Patch the boot.img:
Open the Magisk (Alpha/Beta/Canary/Delta/Stable) App
The Update Channel should be set to Alpha/Beta/Canary/Delta/Stable, depending on the version you installed.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot.img file you extracted from the factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the boot.img has been patched (magisk_patched_xxxxxx.img), and is stored in the download folder.
Reboot
Copy/Move the magisk_patched....img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
Sideload the OTA zip file
Boot Recovery mode
With the device powered on and USB debugging enabled, type: adb reboot recovery
If you're unable to use adb to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select the Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should be on the screen.
Access the recovery menu:
Hold the Power button and press Volume up button up once. The recovery text menu will appear.
Connect the phone to the PC via USB cable
Enter sideload mode:
Select the Apply update from ADB option from the recovery text menu
(Optional) Verify Computer sees your device:
Type: adb devices and press return.
Your device number should shows up with "sideload" next to it.
Sideload the OTA zip file
Select the Apply update from ADB option from the recovery text menu
Type:
adb sideload oriole-ota-aa9a.999999.999-a99999aa.zip and press enter.
Once sideloading finishes, reboot the phone by choosing Reboot system now option on the The recovery text menu.
Note: This slot is bootable and NOT ROOTED
Sideload the OTA zip file to the other slot and Root it.
Boot Recovery mode
With the device powered on and USB debugging enabled, type: adb reboot recovery
If you're unable to use adb to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select the Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should be on the screen.
Access the recovery menu:
Hold the Power button and press Volume up button up once. The recovery text menu will appear.
Connect the phone to the PC via USB cable
Enter sideload mode:
Select the Apply update from ADB option from the recovery text menu
Sideload the OTA zip file
Type: adb sideload oriole-ota-aa9a.999999.999-a99999aa.zip at the prompt and press enter.
Once sideloading finishes, choose Reboot system now option on the The recovery text menu.
Flash Magisk_patched....img to root
On the phone: Boot bootloader/fastboot mode
On the PC:
Open a Command Prompt in the SDK Platform-tools folder.
Type: fastboot flash boot magic_patched....img at the Prompt and press enter.
Type: fastboot reboot at the Prompt and press enter.
Disconnect the phone from the PC.
Note: This slot is bootable and ROOTED.
Done!
Extract Files from Factory Image: flash-all.bat boot/init_boot.img Flash boot/init_boot.img
Extract Files from Factory Image
Extract flash-all.bat and boot.img file
Download the latest Factory image to your phone.
Extract the Factory Image file (oriole-a9a9a.999999.999-factory-99a9a99a.zip) to a folder. The, stock, flash-all.bat file should be in this folder.
Open the folder you extracted the Factory image to and, extract the Image file (image-oriole-aa9a.999999.999.zip) into the folder. The, stock, boot.img file should be in this folder.
Flash boot/init_boot.img
Flashing the boot/init_boot.img removes root.
Open the folder you extracted the 'image...zip' file to and copy the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer
Open a Command Prompt and type the following command at the prompt:
fastboot flash boot --slot all boot.img
Reboot
Root/Reroot with Magisk and Pass SafetyNet.
Android 13
Upgrade to Android 13: OP, Part II - INSTRUCTIONS, 2. Install/Update Factory Image keep data or wipe data, Keep data
Patching the boot.img - to root/reroot.
If your phone was previously rooted, DO NOT repeat DO NOT install another Magisk Manager app. Do this before you patch the boot/init_boot image:
Open the Magisk Manager app and disable all Magisk modules. If you hid the Magisk manager app the default name for the hidden Magisk app is settings.
If you gave it a different name and you've forgotten the name. Use TB checker to find the name of the hidden Magisk Manager. You can also use TB Checker to check if you have more than one Magisk Manager app installed.
Extract the boot/init_boot.img file from the Factory Image.
Download the latest Factory image to your phone.
Extract the Factory Image file (oriole-a9a9a.999999.999-factory-99a9a99a.zip) to a folder.
Open the folder you extracted the Factory image to and extract the Image file (image-oriole-aa9a.999999.999.zip) into the folder. The, stock, boot/init_boot.img file should be in this folder.
Install Magisk Canary - Download app-release.apk
or
Magisk Beta/Stable App
Open Magisk Beta/Canary/Stable App
The Update Channel should be set to Beta/Canary/Stable, depending on the version you Installed.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot.img file you extracted from the latest factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the boot.img has been patched (magisk_patched_xxxxxx.img), and stored in the download folder.
Reboot
Copy/Move the patched boot.img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
Copy it to a USB drive and transfer it to your computer.
Move it to your computer using adb push
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt in the folder you copied the patched boot.img to.
Type fastboot flash boot "name of patched boot".img without the quote marks at the Prompt and press enter.
Type fastboot reboot at the Prompt and press enter.
Important, if your phone boot loops try one of the following options:
Flash the 'stock' boot.img to both slots: fastboot flash boot boot.img --slot all
Remove Modules
Press the Power button until the phone turns off.
Press the Power and Volume Down to boot the bootloader.
Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
fastboot Reboot.
Important, if the Magisk Manager app has the Superuser and Module buttons greyed out:
Read @badabing2003 post
Pass Safety Net with SafetyNet Fix
Download File(s)
Displax's latest SafetyNet Fix, a "fork" of kdrag0n safetynet-fix.
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
Install Displax's safetyNet Fix
Open Magisk
Tap Modules icon
Tap Install from storage
Navigate to the Displax's SafetyNet Fix file you downloaded.
Tap the Displax's SafetyNet Fix file.
Tap the check mark (✓ at the bottom) to start the installation.
After it installs tap the Save icon to save the log
Tap Reboot.
Settings for Magisk Canary
Open Magisk App
Tap the Setup icon.
Scroll down to App and set the Update Channel to Canary.
Scroll down to Check Updates and enable it.
Scroll down to Magisk and enable Zygisk.
Enable Denylist
Tap Configure DenyList => Tap 3 Dot Menu => Check ✓ Show system apps => Check ✓ Google Play Store, Google Pay, Google Wallet etc.
(Optional) Scroll down to Superuser and enable Enable Biometric Authentication.
Get Device Certified
Turn Airplane mode on
Open Settings
Tap Apps & notifications
Tap see all...
Tap three dot menu
Tap Show system
Scroll to Google Play Store
Tap Storage and Cache
Tap Clear storage
Note: Repeat the 3 steps above for any app that needs Device Certification i.e., Google Play Services, Google Pay, Google Wallet, etc.
reboot
Turn Airplane mode off
Check Device Certification
Open Google Play Store app
Tap Menu - Circle top right
Tap Settings
Tap About
Check Play protect certification
It may take 24 hours for Device Certification to be updated.
Note: If after completeting Get Device Certified and Check Device Certification you've waited 24 hours your Device is not Certifed or your Device is Certified and certain Google Store apps (Google Pay, NetFliks, etc.) are not working. Use the Play Integrity API Checker app or the TB Checker - Safetynet and Root app to verify you are passing Play Integrity.
Set Magisk App Update Channel/Update Magisk
Set Magisk App Update Channel
Open Magisk App > Tap Settings icon > Update Channel > Select Stable, Beta, Canary or Custom.
Update Magisk
When Magisk App notifies you of an update:
Tap install.
Select, Direct Install (Recommended)
When it finishes installing
Tap, Save Log
Log location: /storage/emulated/0/Download
Tap, Reboot
Done!
Install/Update Magisk Modules
Download Modules
Download File(s)
Displax's latest SafetyNet Fix, a "fork" of kdrag0n safetynet-fix.
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
LSposed Releases
Shamiko Releases
Install Modules from Storage
Open Magisk
Tap the Modules icon
Tap Install from storage
Navigate to the folder with the Module you want to install.
Tap the Module to highlite it and tap Select.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Install Modules from Androidacy Module Manager
Open Androidacy Module Manager
Tap the Modules icon
Locate the Module you want to install
Tap Install
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Update Modules
Open Androidacy Module Manager
You, will see the Modules that have Updates.
Tap the Module you want to update.
Tap install.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Open a Command Prompt/Boot Fastboot Mode/Boot Recovery
Open a Command Prompt on Computer
Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type cmd and press enter.
Open a Powershell Command Prompt on Computer: Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type powershell and press enter.
Notes:
Enable USB Debugging, on your phone: Settings ==> System ==> Advanced ==> Developer options ==> Scroll down to USB debugging and enable it.
When using the Powershell Command Prompt Commands must be preceeded with ./: i.e, ./fastboot devices
If you do not want to open a Command Prompt every time you want to use the fastboot command, add the path to the Platform-tools folder to Windows environment variables.
Boot fastboot mode (bootloader):
Power off phone, press and hold the power and volume down buttons until you see Start.
Boot Recovery
Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
Test fastboot
Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
Enable USB Debugging.
Open a Command Prompt on your computer in the Platform-tools folder.
Boot fastboot mode on your phone
Connect the phone to the Computer.
At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
ADB Sideload
Stock Recovery
Full OTA Images for Nexus and Pixel Devices - Updating instructions
Custom Recovery TWRP
Waiting for Android 12 (R) T.W.R.P
~ ~ ~ Part III - OTHER ~ ~ ~
Custom ROMs
Need help with a Custom ROM?
If you are you are trying to install or have installed a Custom ROM, read and follow the Installation Instructions in the OP of the Custom ROM thread.
Search the thread of the Custom ROM you are trying to install or have installed for answer(s)/solution(s) to your question(s)/problem(s): If you don't find a answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM thread you are trying to install or have installed.
If you are trying to install a Addon(s) {Custom Kernel, Magisk, etc.} to the Custom ROM you installed: Search the thread of the Custom ROM you installed or the thread of the Addon you want to add to your Custom ROMfor answer(s)/solution(s) to your question(s)/problem(s). If you don't find an answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM or Addon (Custom Kernel, Magisk, etc.) thread.
ROMs
Google Pixel 6 ROMs, Kernels, Recoveries, & Other
Other Custom Rom
[ROM][13][raven][oriole] riceDroid 8.0[AOSP][PIXEL]
Themes, Apps, and Mods
Google Pixel 6 Themes, Apps, and Mods
T.W.R.P. Backup/Restore
Waiting for Android 13 T.W.R.P.
huzzah!
Homeboy76 said:
[Guide] Root Pixel 6 Android 12 with Magisk + Unlock/Lock Bootloader + More
Android Security Bulletin—January 2022
Pixel Update Bulletin—January 2022
Introduction
This Guide is for Pixel 6 owners that want to Root their phone, and enjoy the benefits of rooting it without installing a Custom ROM. However, for those that just can't live without a Custom ROM, take a look at 'Custom ROMs for Pixel 5'.
NEW
Understand 5G network...
With the Magisk Canary update to 23016, there is no longer a need to wipe or --disable verity -- disable verification
Magisk Alpha (vvb2060)
Download Link.
The differences between the different variants of Magisk
Magisk Modules for Magisk Alpha/Canary
a. GitHub - Fox2Code/FoxMagiskModuleManager: A new module manager for Magisk when the official app drop support for it
b. Fox Magisk Module Manager Releases
Update(s)
Factory/OTA Images - Jan
Magisk Canary - Magisk-23016 15Dec
TWRP - Waiting for T.R.W.P. for Android 12
SafetyNet - SafetyNetFix v2.2.1 (Zygisk) 22Dec
SDK Platform-tools - r31.0.3 18Aug
Custom ROMs[/INDENT]
[ROM][SNOWCONE][oriole][12] StatiXOS v5.0
Custom Kernels[/INDENT]
a. ElementalX - Check ElementalX Kernel Manager
b. [KERNEL] CleanSlate P6 - S1.2.0 |S2S|AdBlock|VIB|BatterySvr [Nov 22] by tbalden
c. [KERNEL] [blu_spark r45] [A12]
Custom ROMs
a. ProtonAOSP[12] 01Nov
b. lineage v18-1 redfin[12] Nightly
Disclaimer
I assume no responsibility for the malfunctioning/bricking of your phone.
The order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting an item.
Prerequisites
A Pixel 6 phone with an unlocked bootloader.
The latest Android 12 Factory or OTA Image: "oriole" for Pixel 6
Factory Image
a. 12.0.0 (SQ1D.220105.007, Jan 2022)
b. Which one should I use?
OTA Image
a. 12.0.0 (SQ1D.220105.007, Jan 2022)
b. Which one should I use?
A Computer with the latest SDK Platform-Tools: r31.0.3 installed.
Important Notes:
a. Update Platform Tools, regularly, for optimal performance.
b. Need Google's USB Drivers for your Pixel Phone?
My Other Guides
My other guides:
Pixel 5
Pixel 4a (5G)
Pixel 4 XL
Pixel 3 XL
Pixel 1 XL
Credits/Thanks/Recognitions
Google - Android 12 factory/OTA images.
@topjohnwu - Magisk.
vb2060 - Magisk alpha.
Those I may have, inadvertently, forgotten.
~ ~ ~ INSTRUCTIONS ~ ~ ~
Unlock Bootloader/Return Phone to Stock/Lock Bootloader
Unlock Bootloader
This will erase all user data from the device!
Backup your data
Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
When your phone reboots disconnect your usb cable.
Notes: After unlocking your bootloader, you'll see a warning: The bootloader is unlocked and... You will see this warning until, you relock the bootloader.
Do not relock your bootloader until you have returned the device to Stock.
Return Phone to Stock
Backup your data/Internal storage
Settings > System > Advanced > Reset Options > Erase all data (factory reset)
Log in
Set up phone
Lock Bootloader
Return the phone to Stock before locking the bootloader, failure to do so could brick your phone
This will erase all user data from the device!
Boot fastboot mode
Open a Command Prompt and type this at the Prompt: fastboot flashing lock
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete, then type this at the Command Prompt: fastboot reboot
Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
Tap Back > Developer options and toggle OEM Unlock off.
Install/Update Factory Image keep data or wipe data
Important Note(s):
Install Magisk Canary 23016
Note: Tap 3 dot menu across from canary => Download, app-debug.apk
Always verify you have the latest version of SDK Platform-Tools installed on your computer before installing the Factory Image: Pixel 6 - oriole.
If you get an error:while flashing, try one of these options:
Change the USB port to a non charging USB port.
Change the USB cord.
Change Computers.
Backup your data
Download the latest Factory Image: Pixel 6 - oriole to your Computer.
Extract the factory Image to a folder.
Flash Factory Image Keep Data
Open the folder you extracted the Factory Image to and Edit the flash-all.bat file with a file editor i.e., DroidEdit app.
Change this line: fastboot -w update image-oriole-sq9d.999999.999.zip
to this: fastboot update image-oriole-sq1d.999999.999.zip
Note: If you do not remove the -w your internal storage will be wiped.
After, you have edited the flash-all.bat file. Copy/Move these files to the Platform-tools folder:
bootloader-oriole-....img
flash-all.bat
image-oriole-....zip
radio-oriole-....img
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is completed.
Go-to Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
Flash Factory Image Wipe Data
This will wipe your phone's Internal Storage.
Open the folder you extracted the Factory Image to and Copy/Move these files to the Platform-tools folder:
bootloader-oriole-....img
flash-all.bat
image-oriole-....zip
radio-oriole-....img
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is complete.
Setup phone
Enable Developer Mode and USB Debugging
Setup => About phone => Tap Build number 7 times or untill you see you are a 'Devloper'.
Setup => System => Developer options => Enable Developer options => enable USB Debugging
Go-to Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
Root/Reroot with Magisk and Pass SafetyNet.
Android 12
Upgrade to Android 12: OP, INSTRUCTIONS, Install/Update Factory Image keep data or wipe data, Keep data
Patching the boot.img - to root/reroot.
Do #6 - Extract boot.img
Install Magisk Canary
Note: Tap 3 dot menu across from canary => Tap Go to file => Download, app-debug.apk
Open Magisk Canary App
Set the Update Channel Canary.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot.img file you extracted from the latest factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the boot.img has been patched (magisk_patched_xxxxxx.img), and stored in the download folder.
Reboot
Copy the patched boot.img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt in the folder you copied the patched boot.img to.
Type fastboot flash boot "name of patched boot".img without the quote marks at the Prompt and press enter.
Type fastboot reboot at the Prompt and press enter.
Important Notes:If your phone boot loops try one of the following options:
Flash the 'stock' boot.img to both slots: fastboot flash boot boot.img --slot all
Boot Safe Mode - Press Power Off button ==> Press Power Off until you see boot Safe Mode ==> Press Ok.
Pass Safety Net with SafetyNet Fix 2.2.1
Download File(s)
Universal SafetyNet Fix · v2.2.1 (Zygisk)
Why Zygisk?
Install SafetyNet Fix 2.2.1
Open Magisk
Tap Modules icon
Tap Install from storage
Navigate to the SafetyNetFix file you downloaded
Tap the SafetyNetFix file
Tap the check mark (✓ at the bottom) to start the installation.
After it installs tap the Save icon to save the log
Tap Reboot.
Settings for Magisk Canary
Open Magisk App
Tap the Setup icon.
Scroll down to App and set the Update Channel to Canary.
Scroll down to Check Updates and enable it.
Scroll down to Magisk and enable Zygisk and Enforce DenyList.
Tap Configure DenyList => Tap 3 Dot Menu => Check ✓ Show system apps => Check ✓ Google Play Store, Google Pay, etc.
Optional Scroll down to Superuser and enable Enable Biometric Authentication.
Get Device Certified Clear Google Play Services, Google Play Store, Google Pay, etc. data
Turn Airplane mode on
Open Settings
Tap Apps & notifications
Tap see all...
Tap three dot menu
Tap Show system
Scroll down to Google Play Store
Tap Storage and Cache
Tap Clear storage
Note: Repeat the 3 steps above for Google Play Services, Google Pay, etc.
reboot
Turn Airplane mode off
Check Device Certification
Open Google Play Store app
Tap Menu - Circle top right
Tap Settings
Tap About
Check Play protect certification.
Open a Command Prompt/Boot Fastboot Mode/Boot Recovery
Open a Command Prompt on Computer
Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type cmd and press enter.
Open a Powershell Command Prompt on Computer: Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type powershell and press enter.
Notes:
Enable USB Debugging, on your phone: Settings ==> System ==> Advanced ==> Developer options ==> Scroll down to USB debugging and enable it.
When using the Powershell Command Prompt Commands must be preceeded with ./: i.e, ./fastboot devices
If you do not want to open a Command Prompt every time you want to use the fastboot command, add the path to the Platform-tools folder to Windows environment variables.
Boot fastboot mode (bootloader):
Power off phone, press and hold the power and volume down buttons until you see Start.
Boot Recovery
Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
Test fastboot
Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
Enable USB Debugging.
Open a Command Prompt on your computer in the Platform-tools folder.
Boot fastboot mode on your phone
Connect the phone to the Computer.
At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
ADB Sideload
Stock Recovery
Full OTA Images for Nexus and Pixel Devices - Updating instructions
Custom Recovery TWRP
Waiting for Android 12 (R) T.W.R.P
Extract/Flash boot.img
Extract boot.img
Download the latest Factory image to your phone.
Extract the Factory Image file (oriole-sp1d.999999.999-factory-99a9a99a.zip) to a folder.
Open the folder and, extract the Image file (image-oriole-sp1d.999999.999.zip) into the folder.
Copy the boot.img file to the computer's Platform-tools folder.
Flash boot.img
Flashing the boot.img removes root.
Open the folder you extracted the 'image...zip' file to and copy the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer
Open a Command Prompt and type the following command at the prompt:
fastboot flash boot --slot all boot.img
Reboot
Set Magisk App Update Channel/Update Magisk
Set Magisk App Update Channel
Open Magisk App > Tap Settings icon > Update Channel > Select Stable, Beta, Canary or Custom.
Update Magisk
When Magisk App notifies you of an update:
Tap install.
Select, Direct Install (Recommended)
When it finishes installing
Tap, Save Log
Log location: /storage/emulated/0/Download
Tap, Reboot
Done!
Custom ROMs
Need help with a Custom ROM?
First, read and follow the Installation Instructions. The installation instructions are in the OP.
Second, if you have a problem Installing it, Search the thread of the Custom ROM you are trying to install for a solution to problem: If you don't find a solution post your request for help on the thread.
ROMs
Alpha/Beta
None
Official
None
Unofficial
[ROM][SNOWCONE][oriole][12] StatiXOS v5.0
Apps/Mods/Scripts/Tethering/Themes
Tulsadiver's Mods
Stand alone Clock, Navbargone, etc. Mods
Quick Pull down Tile-Accent Colors
ADB Font Installer including the lockscreen clock
ADB Magisk Module Mod Maker
Other Mods
[MOD][MAGISK][ANDROID 12] Addon Features for Pixel Devices - Pixel 6 Thread
aodNotify - Notification Light / LED for Pixel 6!
How-To Enable Two-Button Navigation on Android 12 (Root Required)!
Audio switcher
T.W.R.P. Backup/Restore
Waiting for Android 12 T.W.R.P.
Click to expand...
Click to collapse
Great resource, thanks. Think you can put it in the How To Guide so it's easy to find?
[GUIDE] Pixel 6 Pro "raven": Unlock Bootloader, Update, Root, Pass SafetyNet
⚠️⚠️⚠️ WARNING! IF YOU ARE UPDATING TO ANDROID 13 FOR THE FIRST TIME, READ THIS FIRST!⚠️⚠️⚠️ If you are looking for my guide on a different Pixel, find it here: Pixel 3 Pixel 3XL Pixel 3a Pixel 3aXL Pixel 4 Pixel 4XL Pixel 4a Pixel 4a (5G)...
forum.xda-developers.com
bobby janow said:
Great resource, thanks. Think you can put it in the How To Guide so it's easy to find?
[GUIDE] Pixel 6 Pro "raven": Unlock Bootloader, Update, Root, Pass SafetyNet
⚠️⚠️⚠️ WARNING! IF YOU ARE UPDATING TO ANDROID 13 FOR THE FIRST TIME, READ THIS FIRST!⚠️⚠️⚠️ If you are looking for my guide on a different Pixel, find it here: Pixel 3 Pixel 3XL Pixel 3a Pixel 3aXL Pixel 4 Pixel 4XL Pixel 4a Pixel 4a (5G)...
forum.xda-developers.com
Click to expand...
Click to collapse
XDA Staff moved it. Are you suggesting I should make a Guide for the Pixel 6 Pro?
Thank you @Homeboy76 as always your guides are excellent.
Nice.!
I put this thread on the watch list incase I have a brain fart. And need to find a good reference for what I am working on at that moment.
Homeboy76 said:
XDA Staff moved it. Are you suggesting I should make a Guide for the Pixel 6 Pro?
Click to expand...
Click to collapse
For sure! Depending on your time committments that would be great.
When I go to patch the boot.img I get an error in Magisk
Code:
- Device platform: arm64-v8a
- Installing 92546e8a (23016)
! Process error
! Installation failed
In the logs, I see the following error in the stack trace
Code:
java.io.FileNotFoundException: /storage/emulated/0/boot.img: open failed: EACCES (Permission denied)
It seems like Magisk doesn't have permission to access the boot image?
EDIT:
Nevermind, it was caused by the app I was using to select the file. I used Google's default Files app and that fixed it
As always, great work! Boomarked in case i have a brain fart
Homeboy76 said:
[Guide] Root Pixel 6 Android 12 with Magisk + Unlock/Lock Bootloader + More
Android Security Bulletin—January 2022
Pixel Update Bulletin—January 2022
Introduction
This Guide is for Pixel 6 owners that want to Root their phone, and enjoy the benefits of rooting it without installing a Custom ROM. However, for those that just can't live without a Custom ROM, take a look at 'Custom ROMs for Pixel 6'.
NEW
Understand 5G network...
With the Magisk Canary update to 23016, there is no longer a need to wipe or --disable verity -- disable verification
Magisk Alpha (vvb2060)
Download Link.
The differences between the different variants of Magisk
Magisk Modules for Magisk Alpha/Canary
a. GitHub - Fox2Code/FoxMagiskModuleManager: A new module manager for Magisk when the official app drop support for it
b. Fox Magisk Module Manager Releases
Update(s)
Factory/OTA Images - Jan
Magisk Canary - Magisk-23016 15Dec
TWRP - Waiting for T.R.W.P. for Android 12
SafetyNet - SafetyNetFix v2.2.1 (Zygisk) 22Dec
SDK Platform-tools - r31.0.3 18Aug
Custom ROMs[/INDENT]
[ROM][SNOWCONE][oriole][12] StatiXOS v5.0
Custom Kernels[/INDENT]
a. ElementalX - Check ElementalX Kernel Manager
b. [KERNEL] CleanSlate P6 - S1.3.1 |S2S|AdBlock|VIB|BatterySvr [Jan 15] tbalden
c. [KERNEL] [blu_spark r45] [A12]
Custom ROMs
a. ProtonAOSP[12] 01Nov
b. lineage v18-1 redfin[12] Nightly
Disclaimer
I assume no responsibility for the malfunctioning/bricking of your phone.
The order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting an item.
Prerequisites
A Pixel 6 phone with an unlocked bootloader.
The latest Android 12 Factory or OTA Image: "oriole" for Pixel 6
Factory Image
a. 12.0.0 (SQ1D.220105.007, Jan 2022)
b. Which one should I use?
OTA Image
a. 12.0.0 (SQ1D.220105.007, Jan 2022)
b. Which one should I use?
A Computer with the latest SDK Platform-Tools: r31.0.3 installed.
Important Notes:
a. Update Platform Tools, regularly, for optimal performance.
b. Need Google's USB Drivers for your Pixel Phone?
My Other Guides
My other guides:
Pixel 5
Pixel 4a (5G)
Pixel 4 XL
Pixel 3 XL
Pixel 1 XL
Credits/Thanks/Recognitions
Google - Android 12 factory/OTA images.
@topjohnwu - Magisk.
vvb2060 - Magisk alpha.
Those I may have, inadvertently, forgotten.
~ ~ ~ INSTRUCTIONS ~ ~ ~
Unlock Bootloader/Return Phone to Stock/Lock Bootloader
Unlock Bootloader
This will erase all user data from the device!
Backup your data
Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
When your phone reboots disconnect your usb cable.
Notes: After unlocking your bootloader, you'll see a warning: The bootloader is unlocked and... You will see this warning until, you relock the bootloader.
Do not relock your bootloader until you have returned the device to Stock.
Return Phone to Stock
Backup your data/Internal storage
Settings > System > Advanced > Reset Options > Erase all data (factory reset)
Log in
Set up phone
Lock Bootloader
Return the phone to Stock before locking the bootloader, failure to do so could brick your phone
This will erase all user data from the device!
Boot fastboot mode
Open a Command Prompt and type this at the Prompt: fastboot flashing lock
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete, then type this at the Command Prompt: fastboot reboot
Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
Tap Back > Developer options and toggle OEM Unlock off.
Install/Update Factory Image keep data or wipe data
Important Note(s):
Install Magisk Canary 23016
Note: Tap 3 dot menu across from canary => Download, app-debug.apk
Always verify you have the latest version of SDK Platform-Tools installed on your computer before installing the Factory Image: Pixel 6 - oriole.
If you get an error:while flashing, try one of these options:
Change the USB port to a non charging USB port.
Change the USB cord.
Change Computers.
Backup your data
Download the latest Factory Image: Pixel 6 - oriole to your Computer.
Extract the factory Image to a folder.
Flash Factory Image Keep Data
Open the folder you extracted the Factory Image to and Edit the flash-all.bat file with a file editor i.e., DroidEdit app.
Change this line: fastboot -w update image-oriole-sq9d.999999.999.zip
to this: fastboot update image-oriole-sq1d.999999.999.zip
Note: If you do not remove the -w your internal storage will be wiped.
After, you have edited the flash-all.bat file. Copy/Move these files to the Platform-tools folder:
bootloader-oriole-....img
flash-all.bat
image-oriole-....zip
radio-oriole-....img
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is completed.
Go-to Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
Flash Factory Image Wipe Data
This will wipe your phone's Internal Storage.
Open the folder you extracted the Factory Image to and Copy/Move these files to the Platform-tools folder:
bootloader-oriole-....img
flash-all.bat
image-oriole-....zip
radio-oriole-....img
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is complete.
Setup phone
Enable Developer Mode and USB Debugging
Setup => About phone => Tap Build number 7 times or untill you see you are a 'Devloper'.
Setup => System => Developer options => Enable Developer options => enable USB Debugging
Go-to Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
Root/Reroot with Magisk and Pass SafetyNet.
Android 12
Upgrade to Android 12: OP, INSTRUCTIONS, Install/Update Factory Image keep data or wipe data, Keep data
Patching the boot.img - to root/reroot.
Do #6 - Extract boot.img
Install Magisk Canary
Note: Tap 3 dot menu across from canary => Tap Go to file => Download, app-debug.apk
Open Magisk Canary App
Set the Update Channel Canary.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot.img file you extracted from the latest factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the boot.img has been patched (magisk_patched_xxxxxx.img), and stored in the download folder.
Reboot
Copy the patched boot.img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt in the folder you copied the patched boot.img to.
Type fastboot flash boot "name of patched boot".img without the quote marks at the Prompt and press enter.
Type fastboot reboot at the Prompt and press enter.
Important Notes:If your phone boot loops try one of the following options:
Flash the 'stock' boot.img to both slots: fastboot flash boot boot.img --slot all
Boot Safe Mode - Press Power Off button ==> Press Power Off until you see boot Safe Mode ==> Press Ok.
Pass Safety Net with SafetyNet Fix 2.2.1
Download File(s)
Universal SafetyNet Fix · v2.2.1 (Zygisk)
Why Zygisk?
Install SafetyNet Fix 2.2.1
Open Magisk
Tap Modules icon
Tap Install from storage
Navigate to the SafetyNetFix file you downloaded
Tap the SafetyNetFix file
Tap the check mark (✓ at the bottom) to start the installation.
After it installs tap the Save icon to save the log
Tap Reboot.
Settings for Magisk Canary
Open Magisk App
Tap the Setup icon.
Scroll down to App and set the Update Channel to Canary.
Scroll down to Check Updates and enable it.
Scroll down to Magisk and enable Zygisk and Enforce DenyList.
Tap Configure DenyList => Tap 3 Dot Menu => Check ✓ Show system apps => Check ✓ Google Play Store, Google Pay, etc.
Optional Scroll down to Superuser and enable Enable Biometric Authentication.
Get Device Certified Clear Google Play Services, Google Play Store, Google Pay, etc. data
Turn Airplane mode on
Open Settings
Tap Apps & notifications
Tap see all...
Tap three dot menu
Tap Show system
Scroll down to Google Play Store
Tap Storage and Cache
Tap Clear storage
Note: Repeat the 3 steps above for Google Play Services, Google Pay, etc.
reboot
Turn Airplane mode off
Check Device Certification
Open Google Play Store app
Tap Menu - Circle top right
Tap Settings
Tap About
Check Play protect certification.
Open a Command Prompt/Boot Fastboot Mode/Boot Recovery
Open a Command Prompt on Computer
Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type cmd and press enter.
Open a Powershell Command Prompt on Computer: Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type powershell and press enter.
Notes:
Enable USB Debugging, on your phone: Settings ==> System ==> Advanced ==> Developer options ==> Scroll down to USB debugging and enable it.
When using the Powershell Command Prompt Commands must be preceeded with ./: i.e, ./fastboot devices
If you do not want to open a Command Prompt every time you want to use the fastboot command, add the path to the Platform-tools folder to Windows environment variables.
Boot fastboot mode (bootloader):
Power off phone, press and hold the power and volume down buttons until you see Start.
Boot Recovery
Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
Test fastboot
Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
Enable USB Debugging.
Open a Command Prompt on your computer in the Platform-tools folder.
Boot fastboot mode on your phone
Connect the phone to the Computer.
At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
ADB Sideload
Stock Recovery
Full OTA Images for Nexus and Pixel Devices - Updating instructions
Custom Recovery TWRP
Waiting for Android 12 (R) T.W.R.P
Extract/Flash boot.img
Extract boot.img
Download the latest Factory image to your phone.
Extract the Factory Image file (oriole-sp1d.999999.999-factory-99a9a99a.zip) to a folder.
Open the folder and, extract the Image file (image-oriole-sp1d.999999.999.zip) into the folder.
Copy the boot.img file to the computer's Platform-tools folder.
Flash boot.img
Flashing the boot.img removes root.
Open the folder you extracted the 'image...zip' file to and copy the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer
Open a Command Prompt and type the following command at the prompt:
fastboot flash boot --slot all boot.img
Reboot
Set Magisk App Update Channel/Update Magisk
Set Magisk App Update Channel
Open Magisk App > Tap Settings icon > Update Channel > Select Stable, Beta, Canary or Custom.
Update Magisk
When Magisk App notifies you of an update:
Tap install.
Select, Direct Install (Recommended)
When it finishes installing
Tap, Save Log
Log location: /storage/emulated/0/Download
Tap, Reboot
Done!
Custom ROMs
Need help with a Custom ROM?
First, read and follow the Installation Instructions. The installation instructions are in the OP.
Second, if you have a problem Installing it, Search the thread of the Custom ROM you are trying to install for a solution to problem: If you don't find a solution post your request for help on the thread.
ROMs
Alpha/Beta
None
Official
None
Unofficial
[ROM][SNOWCONE][oriole][12] StatiXOS v5.0
Apps/Mods/Scripts/Tethering/Themes
Tulsadiver's Mods
Stand alone Clock, Navbargone, etc. Mods
Quick Pull down Tile-Accent Colors
ADB Font Installer including the lockscreen clock
ADB Magisk Module Mod Maker
Other Mods
[MOD][MAGISK][ANDROID 12] Addon Features for Pixel Devices - Pixel 6 Thread
aodNotify - Notification Light / LED for Pixel 6!
How-To Enable Two-Button Navigation on Android 12 (Root Required)!
Audio switcher
T.W.R.P. Backup/Restore
Waiting for Android 12 T.W.R.P.
Click to expand...
Click to collapse
C:\Users\Derek>fastboot flash boot C:\Users\Derek\Desktop\magisk_patched-23016_zt99Y.img
target reported max download size of 261095424 bytes
sending 'boot' (65536 KB)...
OKAY [ 1.853s]
writing 'boot'...
FAILED (remote: partition (boot) not found)
finished. total time: 1.869s
This is the error i get. Even when trying the stock boot.img
What can i do to fix this?
deadliving said:
C:\Users\Derek>fastboot flash boot C:\Users\Derek\Desktop\magisk_patched-23016_zt99Y.img
target reported max download size of 261095424 bytes
sending 'boot' (65536 KB)...
OKAY [ 1.853s]
writing 'boot'...
FAILED (remote: partition (boot) not found)
finished. total time: 1.869s
This is the error i get. Even when trying the stock boot.img
What can i do to fix this?
Click to expand...
Click to collapse
I'm assuming you have the latest version of SDK Platform-tools r. 31.0.3 installed on your computer, there are no typing errors on the command fastboot..., USB debugging is enabled, and fastboot.exe is in this folder:
C:\Users\Derek\Desktop
Try opening Command Prompt in this folder:
C:\Users\Derek\Desktop
Then type:
fastboot flash boot magisk_patched-23016_zt99Y.img to flash it.
After jan. Update my device when rebooting shows ypur device is corrupted before the unlocked bootloader screen warning is this normal? Wasnt there in dec. Update
Nightf0x_007 said:
After jan. Update my device when rebooting shows ypur device is corrupted before the unlocked bootloader screen warning is this normal? Wasnt there in dec. Update
Click to expand...
Click to collapse
No!
Curious, how did you update your phone?
Homeboy76 said:
No!
Curious, how did you update your phone?
Click to expand...
Click to collapse
This is how i updated to dec.
-Executed flash-all flashed bootloader & radio but didnt want to update the device
- fastboot update the image
- fastboot boot magisk patched image
- opened magisk and directly installed magisk
Nightf0x_007 said:
This is how i updated to dec.
-Executed flash-all flashed bootloader & radio but didnt want to update the device
- fastboot update the image
- fastboot boot magisk patched image
- opened magisk and directly installed magisk
Click to expand...
Click to collapse
"Executed flash-all flashed bootloader & radio but didnt want to update the device"
What?
Homeboy76 said:
"Executed flash-all flashed bootloader & radio but didnt want to update the device"
What?
Click to expand...
Click to collapse
Flash-all without -w
Nightf0x_007 said:
Flash-all without -w
Click to expand...
Click to collapse
Did you patch the boot.img with magisk-canary_23016?
Homeboy76 said:
Did you patch the boot.img with magisk-canary_23016?
Click to expand...
Click to collapse
Yes ofcourse, i might end up backing up my data and resetting and flash protonaosp
Update!
Magisk Canary 23017
@Homeboy76
Is this link correct?
Google Pixel 5 - LineageOS 18.1
LineageOS 18.1 Changelog for Google Pixel 5 (redfin). This page is listing the official LineageOS 18.1 (Android 11 11.0) changes and downloads for Google Pixel 5 (redfin).
www.lineageoslog.com
It points to Pixel 5
This step by step tutorial is all about
☆☆☆ FastbootD video tutorial : https://m.youtube.com/playlist?list=PLvggR4skCxYzhB3SXxpSx4LvRzGwx9k45Full round-trip of "GSIs flashing process".
Step to install Stock ROM with Fastboot ability.(need 3in1.tar)
Step to flash GSI on top of Stock ROM.
get rid of SU.which came with "bvS" or "bgS" Variant.(option if you want Magisk)
Step to update GSI without lost your data include magisk.
Step to Recovery back to the First Boot with Magisk (hidden).
<<Additional for PHH AOSP>>
Add Adaptive Auto-brightness for T225 (magisk module) here
Add Face Unlock. here
<< Additional for Stock SAM A13 based>>
Add Restore Samsung Knox features.(had lost from unlocked and root)
Add Advanced Setup New LeOS
ADD DUAL BOOT WITH Vega Bobo DSU Sideloader. (SAM Stock A13 Base) Example here:
**FastbootD Help.
fastboot commands
fastboot commands. GitHub Gist: instantly share code, notes, and snippets.
gist.github.com
--info--
Sam did not provided " fastboot mode" for all devices. only "Odin flashing tool".
What is the FasdtbootD?
What is FastbootD? How to Boot to FastbootD Mode
In this tutorial, we will explain you what is FastbootD Mode in Android, how to boot to FastbootD Mode and how to exit this mode.
www.droidwin.com
*Limitation of FastbootD
FastbootD not the same as regular "fastboot", impossible to use fastbootd without " Dynamic partition. etc., dynamic partitions are automatically created, resized, or deleted as needed.
*FastbootD has access in logical partition like Super Partition.
( have odm +product+vendor+system partition inside) , Because dynamic partitions are implemented in userspace, partitions needed by the bootloader can't be made dynamic. For example, boot, dtbo, and vbmeta are read by the bootloader, and so must remain as physical partitions.
then
You can't uses by fastbootD performed
Code:
fastboot --disable-verity flash vbmata vbmeta.img
✓ Not enough space to resize partition solution
Solution:
Removing stock system_ext and/or product from fastbootd is enough, like so:
***Don't uses this command
"fastboot delete-logical-partition product"
why ?
the product partition, with around 1.3GB in size isn’t even required by the GSIs.
then you can delete data on product partition.
*(Didn't delete product partition itself but deletes only data inside this partition , then android will auto-resize product'spartition.)
Do this.
Code:
adb reboot fastboot
Code:
fastboot erase product
set the size of the product partition to 0
Code:
fastboot resize-logical-partition product 0x0
To verify if the partition size has become 0.
Code:
fastboot getvar all
If one of the lines shows the below code, then the process is a success.
Code:
(bootloader) partition-size:product:0x0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
or
>fastboot erase system_ext
>fastboot resize-logical-partition system_ext 0x0
---End Info--
Resource:
Basic knownledge.
my customAP tutorial.
** When using FastbootD you should knows
Set of fastbootd command.
-content-
Flashing Any GSIsUsing Fastboot without CustomAP 》Save your time.Example_use AOSP A13 from phhusson TrebleDroid GSI.
Complete Cycle From Fastboot Flashing >>>ROOT (Magisk,SU)>>Customized UI >>Update without Lost Data and Magisk.Requirement:
-Unlocked BootLoader
-(Recommend) Stock Firmware Update to A13 such as
"SM-T225XXU1CWA2" etc.,
Why? Used Android 13 GSIs.
1. MTP works
2. Offline Charging works
3. Google Assistant can call for you. (Ok Google call xxx) Stock A13 didn't do it.
etc.,
>Step to install Stock ROM together with Fastboot ability at the same time.
(clean install with stock firmware)
Extract AP Framework File for "recovery.img.lz4" and patch to add FastbootD ability. [ Download Attach file ] or patch by yourself here https://github.com/Johx22/Patch-Recovery.
Flash Stock Framework File with odin. (AP , BL, CP, CSC_not_home) + Magisk patch-boot & vbmeta & patch-recovery at (USERDATA Slot) ( include 3 patch-files to one tar file) [ Download Attach file ] -After reboot must connects internet and set "Developer options = enable OEM unlocking + USB debugging"
(Computer) Download and extract Platform tools to C:\ https://developer.android.com/studio/releases/platform-tools.
(Computer) Download and install Fastboot interface Driver. https://www.droidwin.com/how-to-install-fastboot-drivers-in-windows-11/
Note:
1.you can dirty flash patched fastbootD-recovery at AP slot. When you had any firmware or gsi installed.
2.Howto magisk-patch (boot.img.lz4 + vbmeta.img.lz4). in General Section.
>Step to flash GSI on top of Stock ROM
Set of Command to install GSIs on top of Stock Firmware.
-Connect device with USB cable to Computer.
-Download your GSIs.
-Extract "GSI.img file into platform tools directory.
-open CMD inside the platform-tools folder and then type in the below command
** Check device was already connected with computer.
*** Check bootloader version (patched) is the same as your device's firmware.
0.
Code:
adb devices
1.
Code:
adb reboot fastboot
-Device will turn display into FastbootD mode
2.
Code:
fastboot erase system
option: if you founded ‘Not enough space to resize partition’) error.
Code:
fastboot delete-logical-partition product
3.
Code:
fastboot flash system gsi-filename.img
4. FastootD (pic below)Select "Enter recovery menu"
5.Recovery (pic below)
Select "wipe data/factory reset" menu
6. Recovery (pic above)
Select "reboot system now" menu
>>Finished " Flashing with FastbootD"<<
After installation.
- This variant was included with " PHH-SU".
>Step get rid of SU.(option if you want Magisk) (bvS or bgS variant)
adb shell Enter
su Enter
chmod +x /system/bin/phh-securize.sh Enter
/system/bin/phh-securize.sh Enter
* Device will auto reboot.
After this Magisk icon will show up.
Click Magisk icon to continue setup additional files and reboot.
-----------------------------------------------------------------
*Step to update GSI without lost your data include magisk.
*** (Recommended: use Magisk-Gapps, if you don't want to re-process install gapps again.)
Disable all magisk modules. (if you used another Launcher or Port it from another GSI , pleases uninstall it first.)
Flash New-Update-GSI with FastbootD
Code:
fastboot flash system new-gsi.IMG
then REBOOT System (No factory reset or wipe data)
Code:
fastboot reboot
After get rid of SU , magisk will show up.
get rid of SU
Code:
adb shell
Code:
su
Code:
chmod +x /system/bin/phh-securize.sh
Code:
/system/bin/phh-securize.sh
Note: After this magisk will works again. (with all modules you had installed .)
===End of Update Version info===
Scripts by phhusson to automatically build/CI/Release TrebleDroid GSI
more than 2 times per month
Then I write this easy additional way to update without lost your data..
>Step to Recovery back toThe First Boot with Magisk (hidden installed).
1.Run Factory Reset From Recovery by press and hold (Power+ Vol down)
2. Connect internet and enable Developer options.
3. Enable OEM unlocking & USB debugging.
4. Reboot after that Magisk setting icon will show up again.
--End update--
Happy Chinese New Year!General Section
** Compared 2 projects
** Restore Samsung Knox features.
✓ How to create Magisk patch for boot.img + vbmeta.img
extract (vbmeta.img.lz4 + boot.img.lz4) from your AP Stock
create compress one file xxx .tar with 7zip
move (vbmeta.img.lz4 + boot.img.lz4).tar (xxx.tar) to tab a7 lite
install magisk.apk on you tab a7 lite
patch the tar file. (with magisk manager)
result magisk-patch file at Tab a7 :-Download folder.
✓ Howto install fastboot driver.
How to Install Fastboot Drivers in Windows 11
In this comprehensive tutorial, we will show you the detailed steps to install the Fastboot Drivers onto your Windows 11 PC
www.droidwin.com
✓ [Add pre-patch-recovery-FastbootD]
*** S2 = can't downgrade (Android version) even firmware version.
SM-T220 A13SM-T225 A13SM-T 227U A13SM-T 225N A13T220XXS2CWA7T225XXS2CWA8T227UVLU3CVLAT225NKOU1CWA3T220XXU1CWA2T225XXS2CWA6T220XXU1CWA1T225XXU1CWA2T220XXU1CVL7T225XXU1CVL6T220XXU1CVL5T225XXU1CVL5T220XXS2CWA8T225XXU2CWB3
✓ Howto install "adb &fastboot" on PC
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
You should also replace your adb with the latest binaries by Google.
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
Download the platform tools for windows zip file. Find out where your current adb.exe file is located. Extract the zip into that location, overwrite the old file(s).
Note: Don't delete any files from platform-tools
>>>>>>>>>>>>>>
√ Download:
Where are New AOSP A13 official?
Releases · TrebleDroid/treble_experimentations
Scripts to automatically build/CI/Release TrebleDroid GSI - TrebleDroid/treble_experimentations
github.com
Note: (Read/Write System should uses variant "vndklite".)
✓Changes PHH-SU to Magisk.
- Connect device with your computer. run below command.
Code:
adb shell Enter
su Enter
chmod +x /system/bin/phh-securize.sh Enter
/system/bin/phh-securize.sh Enter
May be didn't found phh-securize.sh only uses root file manager deleted "/system/xbin/su"
√ You can install "GAPPS" by adb shell or by Magisk-Gapps module.
(Cause we didn't have TWRP, but don't worry about TWRP.)
*install Bromite Systemwebview
*Vega Bobo DSU Sideloader (Root mode with magisk)
*this firmware can't downgrade.**S2**T225XXS2CWA6 , it will no longer be possible to roll back even to the previous firmware .
( A13"SM-T225XXU1CWA2)
* Add some T220 FastbootD -Recovery-patch
Reserved:
Option tools for customize your AOSP GSI.
Install Gapps modules with Magisk. ( For Android 13)DOWNLOAD: https://litegapps.site/index.html
CLICK NAME FOR DOWNLOAD
1. [MAGISK]LiteGapps_Nano_arm64_13.0_v2.8_official.zip (Base)
2. GoogleSearch_LiteGapps_Addon_arm64_13.0.zip. (add-on)
3. GoogleAssistant_LiteGapps_Addon_arm64_13.0.zip. (add-on)
Note: you can add add-on mod from here.
STEP. ( with magisk manager )
Flash 1 and Reboot
Flash 2 and Reboot
Flash 3 and Reboot
How to configure Google Assistant . ( For make a call )
-Set Default Digital Assistant.
Open Setting and Search with keyword " digital assistant or assistant"
-Configure OK Google.
Open Setting 》Google 》Setting for Google apps 》Search Assistant & Voice 》 Google Assistant 》Hey Google & Voice match
ENABLE Hey Google.
tom.android said:
You can install "GAPPS" by adb shell .
Click to expand...
Click to collapse
Where can I download a compatible package and what command besides adb shell do I have to run in order to install?
nirogu325 said:
Where can I download a compatible package and what command besides adb shell do I have to run in order to install?
Click to expand...
Click to collapse
readme inside archrive.
tom.android said:
readme inside archrive.
Click to expand...
Click to collapse
The readme only leads me to the package's website which does not tell me which specific command I have to run after adb shell. I then went to the Telegram group which basically tells me this: "adb root then adb shell or adb shell then su" and then "just run the script" Uh-huh. How do I run the script? "running it".
nirogu325 said:
The readme only leads me to the package's website which does not tell me which specific command I have to run after adb shell. I then went to the Telegram group which basically tells me this: "adb root then adb shell or adb shell then su" and then "just run the script" Uh-huh. How do I run the script? "running it".
Click to expand...
Click to collapse
nirogu325 said:
The readme only leads me to the package's website which does not tell me which specific command I have to run after adb shell. I then went to the Telegram group which basically tells me this: "adb root then adb shell or adb shell then su" and then "just run the script" Uh-huh. How do I run the script? "running it".
Click to expand...
Click to collapse
1. install root explorer app. (such as Mixplorer)
2. create directory "gapps" or anyname at /data
such as /data/gapps
3. extract archrive " TitaTheGapps.zip" to dir from 2
4. open terminal adb shell ----then su then
cd /data/gapps/tita
chmod +x ./installer.sh
5. add more space for new gapps by delete some unuseful from "/system/system_ext/apex"
Del "android.vndk.v.28,29,30,32 keep only v31
6. run script---> sh ./installer.sh
note you can use command "mount -o rw,remount /system" or used root explorer do it. (changes RO to RW) before mod system.
nirogu325 said:
The readme only leads me to the package's website which does not tell me which specific command I have to run after adb shell. I then went to the Telegram group which basically tells me this: "adb root then adb shell or adb shell then su" and then "just run the script" Uh-huh. How do I run the script? "running it".
Click to expand...
Click to collapse
Here is what I did to install GApps on AOSP A13:
Get TheGappsInstaller-Tita archive here: https://github.com/ChonDoit/TheGappsInstaller/releases/tag/Tita (specifically: TitaTheGapps_Terminal_20221225.tar.xz)
Extract the tar archive from the tar.xz file
Follow instructions below (credits: ozmage)
adb push TitaTheGapps_Terminal_20221225.tar /sdcard/Download
adb root
adb shell
cd /data
mkdir GAPPS
mv /sdcard/Download/TitaTheGapps_Terminal_20221225.tar GAPPS
cd GAPPS
tar xvpf TitaTheGapps_Terminal_20221225.tar
cd TitaTheGapps_Terminal_20221225
chmod a+x ./installer.sh
sh ./installer.sh
tom.android said:
1. install root explorer app. (such as Mixplorer)
2. create directory "gapps" or anyname at /data
such as /data/gapps
3. extract archrive " TitaTheGapps.zip" to dir from 2
Click to expand...
Click to collapse
dapr0b said:
Here is what I did to install GApps on AOSP A13:
Get TheGappsInstaller-Tita archive here: https://github.com/ChonDoit/TheGappsInstaller/releases/tag/Tita (specifically: TitaTheGapps_Terminal_20221225.tar.xz)
*instructions*
Click to expand...
Click to collapse
Thank you both, THAT is real support.
Update: Howto update GSI without lost your data.
Update.
Flashing Any GSIsUsing Fastboot without CustomAP any longer.
tom.android said:
Update.Flashing Any GSIsUsing Fastboot without CustomAP any longer.
Click to expand...
Click to collapse
Thank you.
I have one question though.
My tab is already updated to SM-T225XXU1CWA2. In the firs step, can I just simply flash with ODIN your attached fastbootd-recovery.tar in AP slot and the 3-in-1.tar in USERDATA slot without including the stock framework file (AP, BL, CP, CSC)?
jtrakx said:
Thank you.
I have one question though.
My tab is already updated to SM-T225XXU1CWA2. In the firs step, can I just simply flash with ODIN your attached fastbootd-recovery.tar in AP slot and the 3-in-1.tar in USERDATA slot without including the stock framework file (AP, BL, CP, CSC)?
Click to expand...
Click to collapse
1. flash only 3in1.tar at AP slot. (magisk 25.2 + vbmeta + recovery-patch)
-install gsi
2. remove SU by
adb shell Enter
su Enter
bra bra bra
look at my tutorial
tom.android said:
1. flash only 3in1.tar at AP slot. (magisk 25.2 + vbmeta + recovery-patch)
2. remove SU by
adb shell Enter
su Enter
bra bra bra
look at my tutorial
Click to expand...
Click to collapse
Thank you. That's a big help.
update iconify v6.0 (extract zip file run iconify.apk ) or update from app.
Iconify • Customize Boring Android UI
Updated to v6.0.0
What's new?
• Custom battery color
• Semi Transparent Brightness bar style
• Semi Transparent QS tile style
• Semi Transparent Notification style
• 5 styles of volume panel
• Improved UI roundness
XPosed Menu: (LSPosed recommended)
• Transparent Qs Panel (Supports more rom)
• Window Level Blur and Force blur enabler for unsupported ROMs
• Vertical QS tiles
• Custom header image (GIF supported)
• Custom header clocks
• Custom lockscreen clocks (custom font supported)
• Clock and status icons background chip
Full Changelog: Click Here
Teamfly Launcher (Didn't test)
TeamFiles Launcher
A launcher which aims to provide stability, speed & customizationMore info at github.com/TeamFiles/TeamFiles-LauncherJoin t.me/loopprojects to get more updates!
store.kde.org
May be compatible with quick switch of OneUI 5.
I also have a question, is this only for SM-T225XXU1CWA2 only ? or T220 can do this too . I have T220 XAR us version android 13 gsi pixel Experience plus with magisk. I want to install fastbootD and install gsi without custom AP.. do I use this guide?
abc1054 said:
I also have a question, is this only for SM-T225XXU1CWA2 only ? or T220 can do this too . I have T220 XAR us version android 13 gsi pixel Experience plus with magisk. I want to install fastbootD and install gsi without custom AP.. do I use this guide?
Click to expand...
Click to collapse
yes u can , extract AP file>>recovery.img.lz4. boot.img.lz4. vbmeta.img.lz4. upload here if you can't patch.
Can you explain how to patch it. Thanks
abc1054 said:
Can you explain how to patch it. Thanks
Click to expand...
Click to collapse
1.boot.IMG.lz4. 2. vbmeta.IMG.lz4. patch with magisk
2.recovery.IMG.lz4. patch follow with https://github.com/Johx22/Patch-Recovery
tom.android said:
yes u can , extract AP file>>recovery.img.lz4. boot.img.lz4. vbmeta.img.lz4. upload here if you can't patch.
Click to expand...
Click to collapse
Here is my files