[ROM] [R] [ONE UI 3.1] [G988U] [G986U] [G981U] - Samsung Galaxy [SNAPDRAGON] S20 / S20+ / S20 Ultra

This ROM is based on Android 11 One UI 3.1 for the Samsung Galaxy S20, S20 Plus or S20 Ultra 5G Snapdragon with modified firmware to allow for a safe update while retaining bit 1 to keep bootloader unlock. This ROM uses the AIO userdata image created by @jrkruse to automatically flash TWRP, Magisk and all of the fixes that we need for our rooted devices. Link to AIO thread here
Flash at your own risk! I am not responsible for any dead device, loss of data, etc.
Requirements:
Must have an unlocked bootloader
Modified odin to flash ROM
Instructions:
Back up any important data because this will wipe your internal storage
Download rom for your device from below and unzip ROM to PC
Connect phone to PC and load all 5 files into odin. *If using no wipe userdata, your lockscreen pin will be reset to swipe so you'll just have to set that again when you boot into system
Press start
When it's finished, phone will reboot and automatically boot to TWRP to format (wipe) data. Then phone will reboot to TWRP again to flash some files. When it is finished, the phone will reboot to system
After you finish setup wizard, open rom control, allow root access and open each tab to set default values
Downloads:
Krog_Roms_G981U1_DUJ7_V2.1
Krog_Roms_G986U(1)_DUJ7_V2.1
Krog_Roms_G988U(1)_DUJ7_V2.1
Odin3_v3.14.1_3B_PatcheD.zip
V2.1 Changelog:
Updated ROM to November 2021 security patch
Updated AIO to include latest TWRP and hardware off zip
V2 Changelog:
U1 firmware with September 2021 security patch
Call recording added
Caller ID and spam protection
Fixed Samsung Health
Modded theme store for unlimited trial time
Over 1k fonts
Added option in settings/advanced features to enable/disable apps that auto-start at boot
Status bar background color choices
3Minit battery in status bar
Show/hide stock battery in status bar
Show/hide stock battery info in quick settings panel
Battery bar in status bar
Adjust size of network speed in status bar
Advanced power menu with switches for all items except power off
Power menu background choices
Power menu text color choices
Removed reboot confirmations in power menu
Navigation bar background choices
Navigation bar gifs
Battery bar in navbar
3Minit battery option for navigation bar
Lockscreen display timeout options
Quick reply from secure lockscreen
Option to automatically expand single notifications in notification panel
Option to wake up display when USB is connected or disconnected
Ability to remove persistent notifications
Thanks to:
@afaneh92
@jrkruse
@klabit87
@stang5litre
Kernel source link

Saved

This looks awesome! Is it 3.1 based on android 11 or 10?

Can you confirm if this ROM addresses the issue where the display dims when you are talking on the phone. It gets so dimmed I cannot even see where any button it is to get the screen back to bright. I end up pressing on the screen and many times I press a button inadvertently and sometimes it is the hang up key. The most dreadful feature of Samsung.

yes_have_some said:
This looks awesome! Is it 3.1 based on android 11 or 10?
Click to expand...
Click to collapse
It is Android 11
mwyarm said:
Can you confirm if this ROM addresses the issue where the display dims when you are talking on the phone. It gets so dimmed I cannot even see where any button it is to get the screen back to bright. I end up pressing on the screen and many times I press a button inadvertently and sometimes it is the hang up key. The most dreadful feature of Samsung.
Click to expand...
Click to collapse
I haven't seen this issue. If it happens to you on full stock, it could be a hardware issue with your phone. Make sure you don't have anything covering the sensors that are up near the front camera on the screen.

Krog18 said:
It is Android 11
I haven't seen this issue. If it happens to you on full stock, it could be a hardware issue with your phone. Make sure you don't have anything covering the sensors that are up near the front camera on the screen.
Click to expand...
Click to collapse
It is a common issue. I don't want to clutter the ROM Q&A but here is just one of many links (https://us.community.samsung.com/t5/Galaxy-S-Phones/Screen-dims-when-making-calls/td-p/319723/page/4). Apparently the right setting varies by phone type but I am using S20 Ultra+. I am simply looking for a ROM where I can override if the phone is active (either by touch, motion if not logged out, etc. the screen does not dim). Thanks

This seems promising, will it work on SM-9880? since its both snapdragon?

Krog18 said:
This ROM is based on Android 11 One UI 3.1 for the Samsung Galaxy S20 Ultra 5G Snapdragon with modified firmware to allow for a safe update while retaining bit 1 to keep bootloader unlock. This ROM uses the AIO userdata image created by @jrkruse to automatically flash TWRP, Magisk and all of the fixes that we need for our rooted devices. Link to AIO thread here
Flash at your own risk! I am not responsible for any dead device, loss of data, etc.
Requirements:
Must have an unlocked bootloader
Modified odin to flash ROM
Instructions:
Back up any important data because this will wipe your internal storage
Download and unzip ROM to PC
Connect phone to PC and load all 5 files into odin
Press start
When it's finished, phone will reboot and automatically boot to TWRP to format (wipe) data. Then phone will reboot to TWRP again to flash some files. When it is finished, the phone will reboot to system
After you finish setup wizard, open rom control, allow root access and open each tab to set default values
Downloads:
Krog_Roms_G988U1_DUH2_V2.7z
Odin3_v3.14.1_3B_PatcheD.zip
V2 Changelog:
U1 firmware with September 2021 security patch
Call recording added
Caller ID and spam protection
Fixed Samsung Health
Modded theme store for unlimited trial time
Over 1k fonts
Added option in settings/advanced features to enable/disable apps that auto-start at boot
Status bar background color choices
3Minit battery in status bar
Show/hide stock battery in status bar
Show/hide stock battery info in quick settings panel
Battery bar in status bar
Adjust size of network speed in status bar
Advanced power menu with switches for all items except power off
Power menu background choices
Power menu text color choices
Removed reboot confirmations in power menu
Navigation bar background choices
Navigation bar gifs
Battery bar in navbar
3Minit battery option for navigation bar
Lockscreen display timeout options
Quick reply from secure lockscreen
Option to automatically expand single notifications in notification panel
Option to wake up display when USB is connected or disconnected
Ability to remove persistent notifications
Thanks to:
@afaneh92
@jrkruse
@klabit87
@stang5litre
Kernel source link
Click to expand...
Click to collapse
can you make a rom for s20

mimsiroll said:
This seems promising, will it work on SM-9880? since its both snapdragon?
Click to expand...
Click to collapse
No, it won't as it is. I'd have to build one specifically for the 0 variant. I'll see what I can do after I get the U variants taken care of.
ywhuangc said:
can you make a rom for s20
Click to expand...
Click to collapse
I can. I have one for G986U just about ready and I can build one for G981U next

Krog18 said:
No, it won't as it is. I'd have to build one specifically for the 0 variant. I'll see what I can do after I get the U variants taken care of.
I can. I have one for G986U just about ready and I can build one for G981U next
Click to expand...
Click to collapse
thank you.

is it possible to make a file for SM-G981V?

Can g981n support

great,thanks,ivery like this rom,wish update continue

ROM works great.
I noticed scrolling screenshot is broken (it was on my stripped down build of DUH2 as well and I'm not sure what broke it)

ChongoDroid said:
ROM works great.
I noticed scrolling screenshot is broken (it was on my stripped down build of DUH2 as well and I'm not sure what broke it)
Click to expand...
Click to collapse
It's working for me. Did you maybe debloat something you shouldn't have?

Can I flash this rom on g9860?

Krog18 said:
It's working for me. Did you maybe debloat something you shouldn't have?
Click to expand...
Click to collapse
yeah I think that might be it. it's weird because I had it on my regular install of duh2
basically the screen scrolls but if you click it again after one scroll it'll stop scrolling and it includes that bar at the bottom of the screen shot

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so this is what happens when I scroll a few times, sometimes it's 1 or 2 times.

ChongoDroid said:
yeah I think that might be it. it's weird because I had it on my regular install of duh2
basically the screen scrolls but if you click it again after one scroll it'll stop scrolling and it includes that bar at the bottom of the screen shot
Click to expand...
Click to collapse
Try uninstalling updates for screen capture app
Edit:
I was able to reproduce this. It seems that there might have been a bad update to the Samsung capture apk, but the version in the rom is good. You can go back to it using the method described above. Then I updated to version 4.8.04.2 through the galaxy store and it seems to be working well so far

@Krog18
Thanks very much for this rom, it's running without issues for me
Question...what does modded theme store mean specifically? I went looking for themes and there were paid and free ones like it's always been. Maybe I was looking in the wrong place, is there a separate section for themes that are trials?
Edit: nevermind, I clicked on one of the paid themes, and I see an option for "download trial" I'm assuming that's what you mean, unlimited trial?

Related

[ROM][ICS] AOKP for MediaPad - Milestone 22.8 Final

AOKP Milestone 22.8
Huawei MediaPad
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks and credits
to all these great opensource communities, and of course KANG team and mediapad developers.
Features:
Unsecure boot.img (stock AOSP kernel)
Superuser & Busybox preinstalled
Deodexed
180 Degree rotation
Built in performance/init.d configuration (Thanks Kejar & company)
Custom Power Menu
Brightness slider in navigation bar.
Custom color for anything in RC
Custom Clock Color/Location: Right, Center, Disable
Battery Icon/ Color Picker: CircleMod, Bar, Text Only, Icon Only, Icon+Text or None
Battery Bar in Status Bar or Nav Bar, Bar Thickness, Charging animation
Nav Bar Transparency
Nav Bar Button Reorder: Back-Home-Search-Menu
Nav Bar Color Picker
Nav Bar Button Glow Duration: Off, Fast, Slow
Nav Bar: Long press to Search button
Nav Bar Hide on Lockscreen
Toggles in Pull Down Menu: Auto rotate, Bluetooth, GPS, Wi-Fi, Aiplane mode, Vibrate,
Silent, Sync, Data, 4G, Tethering, Torch, Brightness
'Traditional' toggle layout (where the toggle are on the very top) -- find in RC > Statusbar
General > Layout
LCD Density (Careful with this)
Menu Button location: Right, Left, both, Remove
Menu Button Visability: Always show, Always show Invisible Icons
Lockscreen Style: Stock, Quad, Octo, ol' gingerbread
Lockscreen Wallpaper
Lockscreen color changer
Lockscreen calendar
Lockscreen SMS customizable shortcut (with icons)
Lockscreen Horizontal Option
Performance Menu: (Use With Caution) Max/ Min CPU, Scaling Governor
Unlock Sceen with Legacy Menu Icon
Volume Key to Wake Screen
Volume Key to Skip Tracks
Long-press back button to kill process
Disable CRT off animation
LED pulse settings (time on/off)
ICS ringtones/notification sounds
Customize carrier text to whatever.
Power Menu options: Boot to recovery/ Boot loader, Reboot, Screenshot
Facebook contact sync integration (must wipe to get this)
Disable Boot animation
Keyboard: Volume keys act as a cursor while typing -- disable in keyboard options
Long press home for recent apps (thanks brucekey)
Quick torch (enable in ROMControl, long press power when phone turned off. See the magic.)
Fast charge toggle for maguro/toro for kernels that support it
Weatherpanel in notification drawer
Weather on lockscreen
Work:
Radio
Data connection
Touchscreen
Full hardware acceleration
Sound
Microphone
Sensors
Camera
Wi-fi
HDMI
GPS
Usb-host
Usb connection to PC (mtp, ptp)
Bluetooth
Problems:
Some glitches in preview of running apps;
Broken photo/camcorder preview;
Random mac address after reboot;
Wrong country detection in Google Play over wifi with turned off radio.
Screenshots:
AOKP Mediapad Screenshot part 1
AOKP Mediapad Screenshot part 2
Donate:
Donate if you like this ROM. Thank
Changelog:
Changelog:
22.8
witched back to stock kernel, but with arkusuma's touchscreen fix - no random reboots now (because 3.0.38 kernel was unstable on cm9 for me and a few other users);
fixed USB connection to PC;
fixed GPS;
fixed USB-host;
fixed "phone UI" of cm9 launcher to "tablet" one (now you can adjust grid size, default is 6x6);
changed back light.sensor values to stock one (at least it works now);
fixed Bluetooth
Download:
ROM: AOKP for Mediapad - Milestone 6
GAPPS: Google Apps 29.04
8.8
init release
Download:
ROM: AOKP for Mediapad - Milestone 6
GAPPS: Google Apps 29.04
Additional description:
Install:
Be aware that im not responsible for any damage that can cause this rom!!!
Flash TWRP recovery from fastboot by these commands:
fastboot flash recovery recovery.img
fastboot flash recovery2 recovery.img
Click to expand...
Click to collapse
Then download AOKP for Huawei Mediapad, Gapps and place them on your sdcard (not internal memory).
Boot in TWRP Recovery, then choose Backup and check cust partition, then Swipe to back up (you will get full backup of stock rom).
Pls notice, that this recovery can make backup only of /cust partition, not /hwcust like in international roms.
Press back to go to main menu and choose Wipe there, then press Factory reset, then System (thats important, 'cause update zip cant format ext4 system partition).
Press back again and choose Install, then find downloaded zip rom, choose it and Swipe to Confirm Flash.
Press back again and choose Install, then find downloaded zip with Gapps, choose it and Swipe to Confirm Flash.
Then reboot in system and enjoy AOKP rom on your Mediapad
amazing, mediapad is getting better in better
one more function I want for my tablet is able to lock screen rotation of current angle.(same Ipad is)
Is radio working ? any download link ?
woohoo
Thanks for the upcoming work !!!!
It's fantastic, thanks man.
Welcome Devs. This community will be so alive.
how to flash this ROM ?
I guess everyone just realize how powerfull this device is... before i was thinking about replacing this tablet...
But i couldnt found any 7" tablet better than mediapad...
7.7 is good but the 3g still pricey and it doesnt have hdmi out
Nexus 7?? Yeah it got tegra3 procie.. but no 3g nor ext storage..
I just need to buy a better case for this beauty..
Sent from my HUAWEI MediaPad using Tapatalk 2
in my computer does not have enough memory to complete the compilation.
who can build from source?
zyr3x said:
in my computer does not have enough memory to complete the compilation.
who can build from source?
Click to expand...
Click to collapse
and what are the requirements?
Sent from my Nexus S using xda app-developers app
zyr3x said:
in my computer does not have enough memory to complete the compilation.
who can build from source?
Click to expand...
Click to collapse
I can (I have a powerfull computer), but you have to explain me how
If you want we can meet on skype or gtalk, send me the contact in pm
monkeydrufy said:
I can (I have a powerfull computer), but you have to explain me how
If you want we can meet on skype or gtalk, send me the contact in pm
Click to expand...
Click to collapse
I have a powerful computer but limited Internet connection... it says downloading the kernel will take about an hour!
Here's what has to be done, I think:
First, you need Linux (Windows users: switch now before it's too late!)
Start by getting repo as explained here:
http://source.android.com/source/downloading.html
When it comes to downloading the source itself, run this instead:
repo init -u https://github.com/AOKP-MEDIAPAD/platform_manifest.git -b ics
then run:
repo sync
Then, to build, you have to follow the instructions here:
http://s.android.com/source/initializing.html
And then should be able to build using:
mka
or:
mka otapackage
(makes a flashable zip)
as explained here:
https://github.com/AOKP-MEDIAPAD/vendor_aokp_ics
I haven't done this myself, just what I gather from the instructions on those pages - I tried downloading the source until I realized how big it is.
Hopefully someone who knows can clarify these instructions, post a howto, or much better, make a zip archive for us to flash ))
Can I use a live linux version?
because I use windows
use virtualbox
441Excelsior said:
use virtualbox
Click to expand...
Click to collapse
yeah, you're right
I'm installing ubuntu, see you later
thanks
---------- Post added at 06:55 PM ---------- Previous post was at 06:18 PM ----------
when I try to "curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo" it say "permission denied"
any idea?
thanks
monkeydrufy said:
yeah, you're right
when I try to "curl ..."
any idea?
thanks
Click to expand...
Click to collapse
you could try "sudo curl ...."
diapolon said:
you could try "sudo curl ...."
Click to expand...
Click to collapse
I've tried, same result

[ROM][ZIP] Rwilco12's Mostly Stock OG1 v1.2 (Updated 10/31/15)

Hey Everyone!
It's been a long time coming and is still a work in progress (my ROM's always are, I keep finding something new I want and add it) but here it is! Rwilco12's Mostly Stock OG1.
As you all know I like a mostly stock look and feel but I like to tweak things a bit to get the performance and enhancements that I want out of my ROM. When I build the ROM I build it for my use and my use alone. Then I share it with everyone in the hopes that someone else out there will enjoy it as much as I do. I am always open to other ideas but I may or may not incorporate them in to my ROM depending on time and whether or not I actually like it.
That being said, let's get on to the fun stuff!
The ROM/Changelog:
Rwilco12's Mostly Stock OG1 v1.2 - 10/31/2015- Changed Root Method (guaranteed root for all users now)
- Enabled Call Duration In Contacts
- Enabled Message Logs In Contacts
- Fixed Missing PRL and Profile Updates Bug
- Removed Carrier Text On Lockscreen
- Custom Lockscreen Wallpaper
- Custom Homescreen Wallpaper
- Removed Google Maps Due to FC's (get it from the Play Store)
- Customized Device Setup Screens
- Added Startup Manager to Settings
- Minor Theming to Recents Menu
- Enabled High-Quality Sound Setting in Call Settings
- Enabled Increased Volume in Pocket/Bag Setting in Call Settings
- Enalbed Additional LED Indicator Options in Display Settings
- Added Extended Reboot Menu
Rwilco12's Mostly Stock OG1 v1.1 - 10/21/2015
- Fixed Permissions Manager Display Bug
- Added Updater Support (and fixed the auto-flash bug from the NE5 build!)
- Added Torchlight Options to Settings
- Added Additional Toggles
- Enabled Multi Window For All Apps
- Enabled Multi Window Quad View (four apps at once instead of just two)
- Removed Knox from Settings (the right way this time)
- Removed S Finder and Quick Connect
- Disabled Device Wake (Screen Turning On) When Plugged In
- Blacked Out Notifications and Toggles
- Removed Margins on Notifications and Toggles
- Debloated More Junk
Rwilco12's Mostly Stock OG1 v1.0 (Initial Release) - 10/15/2015
- OG1 Stock Base
- Deodexed
- Knox Removed
- Pre-Rooted
- Massively Debloated (List of Removed Apps in Post #2)
- Remapped Recents Key to Menu and Search (Long Press for Search)
- Remapped Long Press Home to Recents
- Added Rwilco12's Wallpaper Gallery
- Added Rwilco12's Updater (currently not 100% functional - v1.1 will fix)
- Added Gmail Exchange
- Added Google Calendar
- Added Custom Boot Animation Support
- Added Custom Boot Animation
- Added Custom Boot Sound
- Added Call Button to Phone Logs
- Enabled Wi-Fi Hotspot
- Enabled Read/Write to SDcard
- Enabled Call & Message Block Settings
- Enabled Camera Shutter Sound Menu
- Enabled Camera GPS Tag Menu
- Enabled Scheduled Text Messages
- Enabled 360 Degree Rotation
- Enabled Permissions Manager
- Removed Connections Optimizer
- Removed Battery & Charger Cover Prompts
- Removed Knox from Settings
- Reduced Default Animation Scales for Increased Responsiveness and Speed
- Created Custom Default CSC Workspace​
Prerequisites:
You MUST be on a Lollipop bootloader in order for this ROM to work. I recommend flashing the OG1 Stock TAR and then Philz Recovery through Odin prior to flashing the ROM.​
Directions:
- Boot to your custom recovery (recommended recovery is Philz Touch v6.41.6).
- Wipe Cache.
- Wipe Dalvik Cache.
- Wipe System and Data (Under "Wipe Data/Factory Reset" and then "Clean to Install a New ROM" in Philz Touch).
- Flash ROM!
- Enjoy!​
Downloads:
Rwilco12's Mostly Stock OG1 v1.2
Philz Touch v6.41.6​
Credits/Thanks:
- As always a HUGE thanks to @tdunham for his awesome guides that made this ROM possible!​
XDA:DevDB Information
Rwilco12's Mostly Stock OG1 v1.1, ROM for the Sprint Samsung Galaxy S 5
Contributors
rwilco12
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-10-15
Created 2015-10-15
Last Updated 2015-11-17
Removed Apps:
system/app/AllShareCastPlayer
system/app/AllshareFileShare
system/app/AllshareFileShareClient
system/app/AllshareFileShareServer
system/app/AllshareMediaServer
system/app/AllshareMediaShare
system/app/AntHalService
system/app/ANTPlusPlugins
system/app/ANTRadioService
system/app/Blurb
system/app/Books
system/app/Drive
system/app/DriveLink
system/app/DriveLinkRemote
system/app/Dropbox
system/app/DropboxOOBE
system/app/Flipboard
system/app/GeoLookout
system/app/Headlines
system/app/InteractiveTutorial
system/app/Music2
system/app/Newsstand
system/app/PlayGames
system/app/PlusOne
system/app/PolarisOffice5
system/app/SamsungAppsWidget_Phone_Carrier
system/app/SBrowser
system/app/SBrowserTry
system/app/SecEmail_K
system/app/SecExchange
system/app/SecKidsModeInstaller
system/app/SecMemoDL
system/app/SmartRemote_KL
system/app/SprintVoicemail
system/app/Street
system/app/Swype
system/app/Videos
system/app/YouTube
system/priv-app/HealthService
system/priv-app/ID
system/priv-app/Kies
system/priv-app/SamsungApps_K
system/priv-app/SamsungBilling
system/priv-app/SamsungMusic_20
system/priv-app/SecMyFiles2014
system/priv-app/SecVideo
system/priv-app/SHealth3_5
system/priv-app/SNS
system/priv-app/S-Voice_Android_phone
system/priv-app/VoiceNote
system/priv-app/Zone
Reserved.
Now before you guys tell me how bad this ROM is, please note that I am working on it and have a LOT more planned for it. I started the project and ran out of time to get everything I wanted into it. Be ready for more fun stuff!
Great to see this finally drop. Can't wait to try it. Thanks a lot for this.
Sent from my SM-G900P using XDA Free mobile app
Now I didn't odin the od1 firmware,but I did flash rom,after boot screen phone goes black.I have to pull battery.powered up into recovery,re did my backup.now I didn't let it sit,maybe instead of the boot screen going until it boots it just goes black? I will try again later after phone charges up more....
YES ROM DID BOOT,takes some time.
mholloway said:
Now I didn't odin the od1 firmware,but I did flash rom,after boot screen phone goes black.I have to pull battery.powered up into recovery,re did my backup.now I didn't let it sit,maybe instead of the boot screen going until it boots it just goes black? I will try again later after phone charges up more....
Click to expand...
Click to collapse
Sorry! I forgot to put the big disclaimer in the flash process. I've added this line to the OP. "*Please remember that Lollipop and Deodexed ROM's don't like to play nice with each other and require some time to get acquainted before the ROM will boot. It is not uncommon for the first boot to take between 10 and 20 minutes!"
1. There is a problem Philz Touch v6.41.6 on G900P (build version OG1 )
when flash Philz Touch v6.41.6 with ODIN. Error occurs (Fail)
So I Used TWRP
2. There is a problem when I use APP Associated with Root (ex. root explorer )
phone become freeze, APP Goes Down
3. I can show SuperSU. but rootchecker show to me that this phone have not root access
this is Korea and I am not goot at English
I used TWRP To Flash This Rom. It Worked. Waited AFew Minutes On The Boot Animation. Then Screen Turns Black. I Take Out The Battery Then Back In. Then It Installs Android Updating. Then Setup Home Screen All Well
Sent from my SM-G900P using XDA Free mobile app
Thank you so much for this! Can't wait to give it a spin tonight. Is there a way to revert the soft buttons back to stock function within the ROM, or would it be too much trouble to create/upload a zip that does that? Just a preference of mine, no big deal if you can't.
This sounds awesome! I'm quite partial to the normal button behavior, though. Is there any way to change it back?
Cubit33 said:
Thank you so much for this! Can't wait to give it a spin tonight. Is there a way to revert the soft buttons back to stock function within the ROM, or would it be too much trouble to create/upload a zip that does that? Just a preference of mine, no big deal if you can't.
Click to expand...
Click to collapse
shadowlink217 said:
This sounds awesome! I'm quite partial to the normal button behavior, though. Is there any way to change it back?
Click to expand...
Click to collapse
I'll have to see what I can do.
After having issues getting the rom to boot the first time through Philz. I went through the wiping process again and installed the rom. The second time, I was able to get the rom to boot. When rebooting in recovery and it ask you to apply the root, I selected "no" the second attempt and it worked. Rom went through boot screen, hit the black screen, pulled battery, rebooted and then got the optimizing apps. Hope this helps anyone having issues. Thanks again, cant wait to give this a go!
Finally a ROM that runs nice and smooth without so much bloat. Great work! The ONLY thing I am wondering is how to remove the bootscreen sound? It's the only thing I don't like. Thanks for the awesome work.
JGillis2391 said:
Finally a ROM that runs nice and smooth without so much bloat. Great work! The ONLY thing I am wondering is how to remove the bootscreen sound? It's the only thing I don't like. Thanks for the awesome work.
Click to expand...
Click to collapse
Lol I was super proud of that boot sound! The original Terminator intro. But since you said lots of other nice things, I'll forgive your lack of taste and tell you how to fix it.
To remove it go to system/media/audio and delete PowerOn.ogg from there and the SPR and XAS folders.
I love the boot animation. The rom runs very smooth and fast. Waiting for the updater date. Forces close when i try to open itt. I would love 3minit battery mod on This rom. Wish someone can make a flashable zip for the ones that want it. I know i do
Sent from my SM-G900P using XDA Free mobile app
Haha thanks man. I actually do like the sound of it but I just think it lasts a bit too long. Appreciate it and loving this ROM so far. Coming off of using MOAR for a long time but it lagged my phone so badly and drained my battery. Kind of forgot how fast this phone can be!
Son Rise said:
I love the boot animation. The rom runs very smooth and fast. Waiting for the updater date. Forces close when i try to open itt. I would love 3minit battery mod on This rom. Wish someone can make a flashable zip for the ones that want it. I know i do
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
You mean this Updater?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm working on the next ROM build and plan on having it up soon. Nothing ground breaking but a few more goodies.
EDIT: Speaking of the Updater, I may have the auto flash issue from the NE5 build resolved...
rwilco12 said:
You mean this Updater?
View attachment 3509946
I'm working on the next ROM build and plan on having it up soon. Nothing ground breaking but a few more goodies.
EDIT: Speaking of the Updater, I may have the auto flash issue from the NE5 build resolved...
Click to expand...
Click to collapse
Looks amazing! ! Can't wait for the next version
Sent from my SM-G900P using XDA Free mobile app
Incoming update!
- Fixed Permissions Manager Display Bug
- Added Updater Support (and fixed the auto-flash bug from the NE5 build!)
- Added Torchlight Options to Settings
- Added Additional Toggles
- Enabled Multi Window For All Apps
- Enabled Multi Window Quad View (four apps at once instead of just two)
- Removed Knox from Settings (the right way this time)
- Removed S Finder and Quick Connect
- Disabled Device Wake (Screen Turning On) When Plugged In
- Blacked Out Notifications and Toggles
- Removed Margins on Notifications and Toggles
- Debloated More Junk

[ROM] [International] [UNOFFICIAL] CarbonROM 5.1.1

CarbonROM is an aftermarket firmware based on the CyanogenMod and Android Open Source Project.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonROM GitHub.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! Always Make a nandroid backup!!
Features:
CM Theme Engine
Wi-Fi notifications
Audio:
AudioFX Equalizer
AOSP & CM Audio features
Slim Extra features like:
Camera Shutter sound,
Screenshot Sound,
Safe Headset Volume,
Less frequent notification sounds, etc.
Volume steps,
Audio charge notification
Display Options
Adaptive Brightness
Daydream
Ambient Display
Wake Up on Charge
Double Tap to Sleep
Omni Screen Recorder
Color Calibration
Expanded desktop
CM Notification manager
Slim Heads Up Notifications and its features
LockScreen:
CM shortcuts
Slim shortcuts
Weather with custom style
"CarbonFibers" features Menu:
Status Bar
Slim Clock & Date Options
Weather
Battery Options
(Portrait, Landscape, Circle, Dotted Circle Text or Hidden)
Mobile & Wifi Network activity icon options
Network traffic monitor
Brightness control
notification count
notification ticker
Custom carrier label options
CM custom Navigation Bar tweaked (size/color and other)
Custom Navigation ring
Interface:
Toast animations,
Listview animations,
System animations,
Gesture Anywhere,
App Circle Side Bar
Recents:
Clear All Button Tweaks
Hideable Google search bar
Slim PIE
Notification Drawer
Tile Options (Fully customizable)
Quick Setting Options
Quick & Smart Pulldown
Colorized Tiles
Power Menu:
Advanced reboot
Screenshot
Screen Record
Profile Switcher
Airplane Mode
User Switcher
Settings
Device Lockdown
Sound Panel
Buttons
Fully CM customization for hard buttons (tweaked)
Omni Wake lock blocker
SuperSU - Huge thanks to @Chainfire
Download
Google Apps
any 5.1.1 package
I use this one​
Installation Instructions
Backup
Wipe data/factory reset
Install ROM
Install Google Apps
Reboot to bootloader, flash boot.img from ROM ZIP
Credits
@Lloir
@Thomy
CarbonROM
Source
https://github.com/Phoenix09/android_device_htc_enrc2b-2
https://github.com/themuppets/proprietary_vendor_htc
https://github.com/Lloir/htc_kernel_oxp
https://github.com/CarbonROM
Known Issues:
adding SlimAction to quick settings causes System UI to endlessly crash Fixed 2016-01-09
What Works:
should be the same as @Lloir's CM 12.1 builds
Lloir said:
Working list
Almost everything on 12.1
GPS is a little broken, it STILL WORKS with google maps and so on, just no actual GPS. Yes you can still find you're way to that girl's place you met on tinder :good:
Click to expand...
Click to collapse
Kernel with S2W/DT2W
Download
source
S2W is enabled by default, DT2W is disabled.
default settings:
# enable/disable Sweep2Wake
echo 1 > /sys/android_touch/sweep2wake
# Sweep2Wake distance (in px)
# Not recommended to set this higher than 600
echo 325 > /sys/android_touch/s2w_min_distance
# Sweep2Wake direction settings
# 1: Direction doesn't matter
# 0: Direction does matter
echo 1 > /sys/android_touch/s2w_allow_stroke
# Sweep2Wake Register threshold (in px)
# Number of pixels needed to swipe until button panel gets locked and swipe is registered.
echo 9 > /sys/android_touch/s2w_register_threshold
# Enable/Disable DT2W
echo 0 > /sys/android_touch/s2w_allow_double_tap
Click to expand...
Click to collapse
you can use /data/userinit.sh to change the settings
thanks to @reaper90 for the original script for EliteKernel
Download
reaper90 said:
How to use:You can edit the script by using "edit_userinit.bat" in the .zip file, you can also start installation process right after you finished. Of course it is also possible to change the values on your phone once the script is installed. The script as it is provided by me only contains the default values, so if you don't edit anything, it won't change anything.
How to install:
1. Unpack the.zip file
2. Connect your phone to your computer, make sure USB debugging is enabled
3. Run "install userinit.bat" file and you'll be guided through the installation process.
The installer will push the script file to the right location and automatically set permissions as mentioned by nik3r. You'll need to reboot in order to make your settings apply!
Click to expand...
Click to collapse
The best thing about this is, your using what I haven't released yet
Thanks for testing for me!
I also Fully endorse this... MORE DEVS MORE ROMS AMIRITE!!!!
I LOVE CARBON...THX...
i tried to add SlimAction to quicksettings ... fc in loop! had to wipe data to solve...
:cyclops:​
el-Loko said:
I LOVE CARBON...THX...
i tried to add SlimAction to quicksettings ... fc in loop! had to wipe data to solve...
:cyclops:​
Click to expand...
Click to collapse
I'll do a new build in a few days (if it builds) and try it on that, I'll report it if it's still broken.
I was going to try it on my Nexus 7 but on the build I'm running Settings crashes every time I tap add.
Sent from my Galaxy S6 using Tapatalk
new build here
Changes:
fixed FC with SlimAction, the icon for screenshot was missing
added missing hardware keys config for CarbonROM Fibers so now you won't see options that can't work (like home button wake)
Phoenix09 said:
new build here
Changes:
fixed FC with SlimAction, the icon for screenshot was missing
added missing hardware keys config for CarbonROM Fibers so now you won't see options that can't work (like home button wake)
Click to expand...
Click to collapse
I tried to install the ROM but it failed.
I flashed the boot.img in bootloader and did a factory reset.
I use latest twrp 2.8.7.0 and was running Lloirs ROM 20150917
same story here, this new version seems to have a lot of snags more than the previous one, wifi fails often, the google apps did install well but had problems to start,this is the first build having small problems so far(your original private build was very good CARBON-5.1.1-UNOFFICIAL-20150920-0305-enrc2b. or). I will continue to test and report with exact facts later.
Thank you
Wnsly said:
I tried to install the ROM but it failed.
I flashed the boot.img in bootloader and did a factory reset.
I use latest twrp 2.8.7.0 and was running Lloirs ROM 20150917
Click to expand...
Click to collapse
this is weird, it installed for me yesterday but now doesn't, I have a new build that definitely does
qwesta said:
same story here, this new version seems to have a lot of snags more than the previous one, wifi fails often, the google apps did install well but had problems to start,this is the first build having small problems so far(your original private build was very good CARBON-5.1.1-UNOFFICIAL-20150920-0305-enrc2b. or). I will continue to test and report with exact facts later.
Thank you
Click to expand...
Click to collapse
today's build seems to work ok, I'll upload it soon
Edit: here
Sent from my Galaxy S6 using Tapatalk
Phoenix09 said:
this is weird, it installed for me yesterday but now doesn't, I have a new build that definitely does
today's build seems to work ok, I'll upload it soon
Edit: here
Sent from my Galaxy S6 using Tapatalk
Click to expand...
Click to collapse
Thanks for your quick response.
The new build gives the same error. There's something wrong with unmounting the system. It keeps failing
Wnsly said:
Thanks for your quick response.
The new build gives the same error. There's something wrong with unmounting the system. It keeps failing
Click to expand...
Click to collapse
it should still install, it's failing to unmount because it's already unmounted
I just flashed CM then Carbon and it definitely installed
Sent from my Galaxy S6 using Tapatalk
Phoenix09 said:
it should still install, it's failing to unmount because it's already unmounted
I just flashed CM then Carbon and it definitely installed
Sent from my Galaxy S6 using Tapatalk
Click to expand...
Click to collapse
Ok will try again
Edit:
Installation worked. I ignored the error flashed gapps and it booted!!
Nice to see there's still development on the One X+
Hi dear
3g internet not work
mike36 said:
Hi dear
3g internet not work
Click to expand...
Click to collapse
go to settings, set preferred network to 3G
it definitely works, I just tested it
I think it has the wrong default, I'll check later
Sent from my Galaxy S6 using Tapatalk
Phoenix09 said:
it should still install, it's failing to unmount because it's already unmounted
I just flashed CM then Carbon and it definitely installed
Sent from my Galaxy S6 using Tapatalk
Click to expand...
Click to collapse
Wnsly said:
Ok will try again
Edit:
Installation worked. I ignored the error flashed gapps and it booted!!
Nice to see there's still development on the One X+
Click to expand...
Click to collapse
Next time just unmount system in advanced -> mount (I think)
I had this issue on my Nexus 5
Phoenix09 said:
go to settings, set preferred network to 3G
it definitely works, I just tested it
I think it has the wrong default, I'll check later
Sent from my Galaxy S6 using Tapatalk
Click to expand...
Click to collapse
The same problem as is evident image
As I have a problem in the store captured images of the screen
mike36 said:
The same problem as is evident image
As I have a problem in the store captured images of the screen
logs?
Click to expand...
Click to collapse
Note the network logo in the top bar there (!)
Must be (3g) to worke internet
Lloir said:
logs?
Click to expand...
Click to collapse
Hello my friend
I'd like to download this rom. But the problem is that it does not connect to the Internet at 3g ..... in wifi work
Please help
mike36 said:
Hello my friend
I'd like to download this rom. But the problem is that it does not connect to the Internet at 3g ..... in wifi work
Please help
Click to expand...
Click to collapse
Did you flashed boot.img in bootloader over adb?

Android 10-Various Mods-Zip installer-creates Magisk module.

I am no longer going to make aroma installers. The zip method is very similar and should work whether or not you are flashing modules as long as one of the modules does not mod the framework-res.apk or SystemUIGoogle.apk. Download the zip installer. Unzip it into a folder on your internal sdcard. Find that folder once you are in TWRP.
This what it looks like. Inside those folders are the zips you will flash. Hit the back button in TWRP and go to the next one you want to flash. Continue until you are done then flash complete installation. Nothing is flashed to your system until you flash "complete installation".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Zip Installer Instructions
!!! Make sure you have installed the 3Minit Resources APK prior to flashing the 3Minit Battery Mod!!!
1. FLASH ONE Of THE SYSTEMUI BASES BEFORE FLASHING THESE MODS. IT PROVIDES THE NECESSARY SMALI'S AND PUBLIC ID'S
2. FLASH ALL THE MODS YOU WANT. ONCE YOU DONE WITH EVERYTHING, FLASH THE "COMPLETE INSTALLATION" ZIP AND REBOOT.
List of MODS Available
Clock Format and Position Mods
Internet Traffic Speed Single Indicator (changes from upload-download) otherwise signals are over/under
Choose Traffic Speed Indicator Up-Down Icon Colors (default is white)
Navbar Height Options
Navbar Swap
Remove NavBar
3 Minit Battery
One percent custom battery Mods-Several to choose from
One percent custom battery Text-only-Several to choose from
Colored Statusbar-Navbar Icons
Choose number of QS columns 3-7
Colored Statusbar Icons
Remove Carrier Text Options
Smaller LTE Icon
Custom Battery Sizes in case custom batteries are too large or too small
The developer of Active edge gave me permission to use his base so that people would not have to make a choice between his and my mods. All credit for this goes to him. You must delete the active edge sense module and use one of my active edge modules. If it doesn't say active edge then it isn't active edge sense compatible. If there is an issue with edge sense after flashing, do not contact edge sense op with issues. He does not troubleshoot modified versions of his mod (and neither do I).
ADB Installer Instructions-Root is required
1. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work.
2. FLASH ALL THE MODS YOU WANT. ONCE YOU DONE WITH EVERYTHING, FLASH THE "COMPLETE INSTALLATION" Option. This will create a Magisk Manager flashable zip in a folder on your sdcard called ozop. Flash that to install your selection of mods.
Root required
Instructions.
1. Unzip ADB Mods Installer Files.zip on your PC
2. Run TulsadiverModsInstaller.bat (Give ADB Root Permissions)
3. ADB debugging Enabled
4. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work
5. Go through the other options selecting what all mods you want. It is generally best to start at the top and work your way down.
6. Once finished with selections, run "Complete Installation" at the bottom. This will generate your mymagisk.zip module in a folder called "ozop" on your sdcard.
Android 11 uploaded 9-24-20
Note Added a couple of wifi and data signal options.
WiFi 1 and Cell Tower 1
WiFi 2 Cell Tower 2
WiFi 3 data 3
Android 11
Zip Installer for Android 10 uploaded 9-24-20
https://www.androidfilehost.com/?fid=8889791610682944477
ADB installer uploaded 9-24-20
https://www.androidfilehost.com/?fid=8889791610682944438
-----------------------------
Android 10
Zip Installer for Android 10 uploaded 6-4-20
https://mega.nz/file/xVYGUAQJ#nzuPlPTEXbM0PL4fAyWoQ7Z_PfDNdvWeUgUYTX2U1jo
--------------------------------------------------------------------------------------
Pixel Launcher Mod
Credit goes to sharkie405 for his guide.
Start by picking a base. Bases come with, or without, a search bar and Hotseat heights The larger number of rows you pick, the lower your hotseat drops on your home screen. If your hotseat comes out too low, try again with a higher base.
Remove Search Bar
App Drawer background color (Light and Dark Mode)
App Drawer Text Color or remove (Light and Dark Mode)
Home screen App Text Color
Smart-screen Text color
App Icon Sizes 45-50-56 dip (56 is stock)
Columns (5-6-7)
Rows (5 through 11)
Android 11
ADB Pixel Launcher Installer uploaded 9-13-20
https://www.androidfilehost.com/?fid=8889791610682936558
Zip Installer uploaded 9-23-20
https://www.androidfilehost.com/?fid=8889791610682943568
-------------------------------
Android 10
ADB Pixel Launcher Installer uploaded 6-18-20
https://www.androidfilehost.com/?fid=8889791610682873110
TWRP zip Installer
https://www.androidfilehost.com/?fid=8889791610682873111
Awesome work! Thanks
Nice thanks op ?
You need to be rooted?
failax said:
You need to be rooted?
Click to expand...
Click to collapse
No as far you got twrp and running P
dukat0s said:
No as far you got twrp and running P
Click to expand...
Click to collapse
I think you need to be rooted
failax said:
You need to be rooted?
Click to expand...
Click to collapse
Yes, you need root. It is possible to install mods via adb but root is still needed.
Hey @Tulsadiver
Great mods!
I'm on the P and I do have some problems.. I'm not much of a tweaks guy, All I want to do, is to get rid of the navbar.
In aroma I do select remove navbar with 3 Titles - the first one - but the clock moves to the right. Anyway to just disable the navbar? And that everything else stays the same?
Thank you!
Bucika said:
Hey @Tulsadiver
Great mods!
I'm on the P and I do have some problems.. I'm not much of a tweaks guy, All I want to do, is to get rid of the navbar.
In aroma I do select remove navbar with 3 Titles - the first one - but the clock moves to the right. Anyway to just disable the navbar? And that everything else stays the same?
Thank you!
Click to expand...
Click to collapse
Use the base "stock like" and your clock should be on the left then select 3 column remove navbar. I'm working on an updated version. Should be out later today or this evening.
Awesome! It works great now!
Anyone tried on DP2??
Bucika said:
Anyone tried on DP2??
Click to expand...
Click to collapse
Not yet since im having issues rooting dp2 :/
Jiggs82 said:
Not yet since im having issues rooting dp2 :/
Click to expand...
Click to collapse
I will try to root it, and try out the zip after I get home from work later today.. I love the new nav thing lol, but I need to shrink it as it looks way to big for me.. Maybe even disable the whole thing and use some kind of navigation app to get to the menu.
Anyways I'll try it later today and I'll see how it goes!
Bucika said:
I will try to root it, and try out the zip after I get home from work later today.. I love the new nav thing lol, but I need to shrink it as it looks way to big for me.. Maybe even disable the whole thing and use some kind of navigation app to get to the menu.
Anyways I'll try it later today and I'll see how it goes!
Click to expand...
Click to collapse
Ok please let me know cuz i was up all night fighting with my phone lol i lost my backups and files trying to root dp2 smh so i had to just reflash the dp2 factory image and twrp only so hopefully we can root it if not ill have to flash 8.1 again and start from scratch ...sigh lol
Lol yeah i feel u on the new gesture nav bar its pretty cool but still too early for my liking ..
I tried the DP2 yesterday and didn't have any issues rooting at all on latest Magisk 16.4
pro_b said:
I tried the DP2 yesterday and didn't have any issues rooting at all on latest Magisk 16.4
Click to expand...
Click to collapse
What steps did you take to get it up and running?
Don't install he has to update the zip will cause bootloops!!!!!
I can confirm that.. you will get the bootloop!
I just hope there is a new .zip in the works! I would really love to reduce the size of the navbar gestures..
ct_tec313 said:
Don't install he has to update the zip will cause bootloops!!!!!
Click to expand...
Click to collapse
Glad I read this before jumping in. Will wait. Thanks for sharing and preventing me and any others from unnecessary aggravation. You are a gentleman. @Bucika that goes for you too.
Yay... I didn't read and flashed it ... fruit loops for me!

[Magisk Module] Nokia Extensions

Nokia Extensions
Telegram Group
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Module description
Why should the Chinese have all the fun? This module aims at porting features from the Chinese variants of Nokia phones to the Global variants. **Internet connection is required while flashing!** Files are downloaded using curl.
Click to expand...
Click to collapse
Features
Note: If you want to install only some of the following, you can do so. During installation, use the volume keys to select what you want to install and what not to install.
1. AI Floating Touch
- The phone will recommend relevant applications according to your usage.
- You can also:
- Use the custom shortcuts to customize the shortcut menu.
- Use gestures to enrich your interaction with the phone.
2. App Traffic Control
- Control Internet usage (both mobile data and WiFi) by your Apps. Ex: You can restrict internet access to an app completely or allow it to use only WiFi and not mobile data.
3. Data speed indicator
- Shows your internet speed on the status bar.
4. Evenwell Debloater
- Systemless-ly removes Evenwell apps.
- List of apps and overlays removed.
5. Face Unlock
- Unlock with a glance. Just lift the phone to unlock, even when the screen is off. Find it under device security settings.
- Note: Using your face data to unlock your device is less secure than using the pattern, PIN or password. Your device might be unlocked by people who look like you.
6. Game assistant
- Enhance your gaming experience.
- Block notifications and calls for uninterrupted gaming.
7. Glance Screen
- An enhanced version of Ambient display with more features.
8. HyperClip
- This is a simple and powerful Clipboard Manager.
9. Junk Cleaner
- Clears cache and junk files.
10. NokiaPure font
- Change your system font to NokiaPure
11. OTA Updater
- Install system updates without entering recovery.
12. Screenshot Plus
- Take long screenshots, edit them on the go.
13. Screen Recorder
- Supports FHD, HD and SD at 30 and 60 FPS, records audio too.
14. Smart Boost
- Enjoy gaming without frame drops and hiccups!
15. Task Manager
- View and end a running task.
16. Virus scan
- Scan for virus and keep your phone secure.
17. NEX Overlay
- One-handed mode
- Full-screen navigation gestures
- Double tap navigation bar/status bar to sleep
- Swapping navbar keys (back and recents button)
- Direct call answer
- Advanced section in the settings app
- Double tap to wake (untested)
- Clear all button (For Android Pie, you have to set SystemUI as the recents provider using QuickSwitch)
Click to expand...
Click to collapse
How to's
- To install the module, flash the zip using Magisk manager and reboot.
- To uninstall the module, flash the same zip again and reboot.
- To install an OTA update using OTA updater,
- Restore your stock boot image from Magisk Manager(Magisk Manager - Uninstall - Restore images). Don't reboot and don't flash the stock boot using fastboot, you'll lose root!
- Place the OTA update zip file in your internal storage(/storage/emulated/0/).
- The file has to be renamed correctly. [More info here]. You can get your current build version from NEX Launcher's Device section.
- Dial *#*#874#*#* to install the update.
- To get the internet speed on the status bar, go to Settings - Network & Internet - Data Usage and toggle Show data speed.
- To access App traffic control, go to Settings - Network & Internet - Data Usage - App Traffic Control. You can also access it from NEX Launcher.
- HyperClip will show up when you long press on a text input field.
- Swipe right to add to favourite.
- Swipe left to delete or share.
- Long press to view the full content.
- To use Screenshot plus and Screen Recorder, add them to Quick Settings.
- To open AI Floating Touch, Smart boost and the like use NEX Launcher.
- If you have installed the overlays, you'll see a new gesture section in settings, where you can find one hand mode, navigation gestures etc.
- About OTA Link
Click to expand...
Click to collapse
Compatibility
- Nokia Phones
- Magisk 18.0+
- Magisk Manager 7.1.0+
- Android Oreo
- Android Pie
Click to expand...
Click to collapse
Downloads
- You can find the latest release here.
Click to expand...
Click to collapse
Source code
- Module
- NEX Launcher
- Nokia Extensions Repo
- nex substratum
Click to expand...
Click to collapse
XDA:DevDB Information
[Magisk Module] Nokia Extensions, Tool/Utility for Nokia phones
Contributors
Akilesh_15
Version Information
Status: Stable
Current Stable Version: v2.5
Stable Release Date: 2019-06-12
Created 2019-06-12
Last Updated 2019-06-12
Screenshots
This requires root?
hansel_mendonca said:
This requires root?
Click to expand...
Click to collapse
Obviously. Read the title, it's a Magisk module
Akilesh T said:
Obviously. Read the title, it's a Magisk module
Click to expand...
Click to collapse
Fantastic work bro. Useful for Global users. Keep up the good work... :good:
Rajeev said:
Fantastic work bro. Useful for Global users. Keep up the good work... :good:
Click to expand...
Click to collapse
Thank you bro
Can you help me howto installing it on my nokia 7 plus?
Emad tober said:
Can you help me howto installing it on my nokia 7 plus?
Click to expand...
Click to collapse
You need unlocked bootloader firstly. Then root your phone using Magisk. Now you can flash the module via Magisk manager app.
Will this deprive me of air updates?
Emad tober said:
Will this deprive me of air updates?
Click to expand...
Click to collapse
No. But you have to unroot before installing an OTA update (you can root again after updating) and you must not alter the system.
Thanks alot....
I have two issues..! one is in lockscreen clock text there is a square character istead of a colon, and for network speed indicator the color is always white,so when using chrome we cant see the network speed as new chrome uses white color status bar,hope you can fix it soon
also how can i open taskmager and all
was wondering if I could somehow get the screen recorder apk only? that's all I need ?
zohaibahd said:
was wondering if I could somehow get the screen recorder apk only? that's all I need ?
Click to expand...
Click to collapse
Yes, you can. One of the highlights of this module is that you can select only the files you want to install. While flashing via Magisk Manager, use the volume keys to select only screen recorder and say no to others.
Will it work on pie?
jirka607 said:
Will it work on pie?
Click to expand...
Click to collapse
Yes. Works on Android 8.1.0 and 9
I am new here, is it possible to get that goods as na app to instal it without loosing warranty?
BERNARD
BERNARD-DOMINIK said:
I am new here, is it possible to get that goods as na app to instal it without loosing warranty?
BERNARD
Click to expand...
Click to collapse
Once your phone is unlocked, it will no longer be covered by the manufacturer's limited warranty provided by HMD Global.
Will this work with stock Android?
Will it work on other Android one devices ? Or stock roms ?

Categories

Resources