my realme narzo 30a is stuck on bootloop when i flashed twrp and then vbmeta then i use adb to boot to recovery now it is on boot loop i cant enter fastboot or recovery nor normal mode i cant do anything can someone help.
FoldedOdin said:
my realme narzo 30a is stuck on bootloop when i flashed twrp and then vbmeta then i use adb to boot to recovery now it is on boot loop i cant enter fastboot or recovery nor normal mode i cant do anything can someone help.
Click to expand...
Click to collapse
Same here bro did you got any solution please reply?
Re-flash Stock ROM to get rid off of all modifications you applied so far.
RajuAnsari124 said:
Same here bro did you got any solution please reply?
Click to expand...
Click to collapse
no
jwoegerbauer said:
Re-flash Stock ROM to get rid off of all modifications you applied so far.
Click to expand...
Click to collapse
how do you do that?
Look inside here:
Realme Narzo 30A RMX3171 Flash File Firmware (Stock ROM) - Mobile Guru4
Download the Oppo Realme Narzo 30A RMX3171 Flash File (Firmware ROM) from here. the given file is in OFP extension using Realme Flashtool.
www.mobileguru4.com
jwoegerbauer said:
Look inside here:
Realme Narzo 30A RMX3171 Flash File Firmware (Stock ROM) - Mobile Guru4
Download the Oppo Realme Narzo 30A RMX3171 Flash File (Firmware ROM) from here. the given file is in OFP extension using Realme Flashtool.
www.mobileguru4.com
Click to expand...
Click to collapse
dont i need to enter fastboot mode in order to flash the stock rom
Flashing Stock ROM typically is achieved by ADB Sideload method. But this in your case can't be performed because your device stucks in a bootloop, means a stable USB-connection what ADB relies on isn't possible.
jwoegerbauer said:
Flashing Stock ROM typically is achieved by ADB Sideload method. But this in your case can't be performed because your device stucks in a bootloop, means a stable USB-connection what ADB relies on isn't possible.
Click to expand...
Click to collapse
what should i do?
My recommendation: Take this high-end phone to authorized service center and let them try to fix it.
k i will take this phone to the service center thanks for helping so far
Related
Does anybody knows how to root or flash a recovery or a rom on a Huawei Y6 2018 ATU-l21?
Thank you.
JiX666 said:
Does anybody knows how to root or flash a recovery or a rom on a Huawei Y6 2018 ATU-l21?
Thank you.
Click to expand...
Click to collapse
I could not find an recovery for Huawei Y6 2018 but I may tell you this:
You may unlock your bootloader and root your device.
How you may root it?
Get the boot.img of your model (you may get it extracting an update.app for your model)
Install Magisk Manager on your device and patch that boot.img
After that go to your PC, make sure you have usb debugging and OEM unlock enabled from dev settings on your phone and install "minimal adb&fastboot 15 sec installer" or something like that and put the patched boot.img in the folder of minimal adb and fastboot.
Now shutdown your device and after that press power and volume down for about 5 seconds and connect the usb cable ( that usb cable should be connected to PC). Now your device should go into fastboot. Now type fastboot devices(In minimal adb and fastboot console). It should show you an number, if nothing shows up then its not good.
If it shows up type fastboot flash boot boot.img
You are done. This may go wrong and may hard brick your device, don't blame me for that.
This requires your bootloader to be unlocked, to unlock it you need to get the bootloader unlock code from huawei, put your phone into fastboot and type fastboot oem unlock (code)
If I helped, the thanks button works well
Thespartann said:
Get the boot.img of your model (you may get it extracting an update.app for your model)
Click to expand...
Click to collapse
Can you better explain this step please?
JiX666 said:
Can you better explain this step please?
Click to expand...
Click to collapse
So basically download this https://forum.xda-developers.com/showthread.php?t=2433454
Get the update.app for your device.
The update.app is basically the Stock Rom for your device.
Search google to find it.
Now extract huawei update extactor into an folder. And run the exe. (The link i sent)
And now you will select the update file (update.app) and you should see some .img files, now you may extract all of them, but select the system.img and boot.img and right click on your mouse. You will see the option Extract selected.
Now wait until it extractes itself.
If i helped press the thanks button
Thespartann said:
So basically download this https://forum.xda-developers.com/showthread.php?t=2433454
Get the update.app for your device.
The update.app is basically the Stock Rom for your device.
Search google to find it.
Now extract huawei update extactor into an folder. And run the exe. (The link i sent)
And now you will select the update file (update.app) and you should see some .img files, now you may extract all of them, but select the system.img and boot.img and right click on your mouse. You will see the option Extract selected.
Now wait until it extractes itself.
If i helped press the thanks button
Click to expand...
Click to collapse
Stock Rom isn't available yet for download.
I've tried installing TWRP using fastboot flash recovery recovery.img
That failed.
Then I used fastboot flash recovery/ramdisk recovery.img
Succes… But then its impossible to boot into TWRP. It automatically jumps to eRecovery.
Huawei Y6 Prime 2018 ATU-L21
Oreo 8.0.0
---------- Post added at 10:52 PM ---------- Previous post was at 10:39 PM ----------
inkepinkje said:
Stock Rom isn't available yet for download.
I've tried installing TWRP using fastboot flash recovery recovery.img
That failed.
Then I used fastboot flash recovery/ramdisk recovery.img
Succes… But then its impossible to boot into TWRP. It automatically jumps to eRecovery.
Huawei Y6 Prime 2018 ATU-L21
Oreo 8.0.0
Click to expand...
Click to collapse
And I don't know if 'there is a custom Rom available from other devices that are compatible with this one.
Build number ATU-L21 8.0.0.100(C423)
EDIT: Google search gave me this
To find stock rom for ATU-L21. Search for Atomu-L21
They are the same.
inkepinkje said:
Stock Rom isn't available yet for download.
I've tried installing TWRP using fastboot flash recovery recovery.img
That failed.
Then I used fastboot flash recovery/ramdisk recovery.img
Succes… But then its impossible to boot into TWRP. It automatically jumps to eRecovery.
Huawei Y6 Prime 2018 ATU-L21
Oreo 8.0.0
---------- Post added at 10:52 PM ---------- Previous post was at 10:39 PM ----------
And I don't know if 'there is a custom Rom available from other devices that are compatible with this one.
Build number ATU-L21 8.0.0.100(C423)
EDIT: Google search gave me this
To find stock rom for ATU-L21. Search for Atomu-L21
They are the same.
Click to expand...
Click to collapse
Hm. Treble made some things different.
Also what recovery you wanted to flash?
I could not find any for Huawei Y6 2018 so you may hard brick your device if you use one for Y6 2015 etc.
Thespartann said:
Hm. Treble made some things different.
Also what recovery you wanted to flash?
I could not find any for Huawei Y6 2018 so you may hard brick your device if you use one for Y6 2015 etc.
Click to expand...
Click to collapse
I've tried flashing serveral twrp's. ClockWorkMod is definitely a no go. Then there is a mate10 tool. Tried that. Nothing. It says bootloader locked. While frp and bootloader are both unlocked.
I'm not worried about a hardbrick. It was a gift. So just toying around.
Found a stock firmware on easyfirmware.com . But they make you pay. So nope.
I'll just keep on googling until I find something that will work.
My coding is nill. So.... Hope and pray.
inkepinkje said:
I've tried flashing serveral twrp's. ClockWorkMod is definitely a no go. Then there is a mate10 tool. Tried that. Nothing. It says bootloader locked. While frp and bootloader are both unlocked.
I'm not worried about a hardbrick. It was a gift. So just toying around.
Found a stock firmware on easyfirmware.com . But they make you pay. So nope.
I'll just keep on googling until I find something that will work.
My coding is nill. So.... Hope and pray.
Click to expand...
Click to collapse
Well well well. If you tried to flash clockworkmod or twrp to your device, Huwei Y6 2018, from Huawei Y6 2015 that means hard brick lol, what were you thinking. See the description of the thread lul. You could have hard bricked your device, there are no custom recovery's for Huawei Y6 2018. So be more carefull, clockword recovery is already oold so there was no reason to be for an device from 2018.
Thespartann said:
Well well well. If you tried to flash clockworkmod or twrp to your device, Huwei Y6 2018, from Huawei Y6 2015 that means hard brick lol, what were you thinking. See the description of the thread lul. You could have hard bricked your device, there are no custom recovery's for Huawei Y6 2018. So be more carefull, clockword recovery is already oold so there was no reason to be for an device from 2018.
Click to expand...
Click to collapse
I see. Its been a while since I've played with Android. So my bad. Been just a week playing around again.
inkepinkje said:
I see. Its been a while since I've played with Android. So my bad. Been just a week playing around again.
Click to expand...
Click to collapse
Well its ok.
I may port TWRP for your device, when i have time
I have managed to boot TWRP but it cant mount partition so got stuck in a twrp boot loop. i had to flash another recovery to be able to get to erecovery and boot.
ps: tried to root, dint work!
Fernandodx1000 said:
I have managed to boot TWRP but it cant mount partition so got stuck in a twrp boot loop. i had to flash another recovery to be able to get to erecovery and boot.
ps: tried to root, dint work!
Click to expand...
Click to collapse
May you send me the erecovery so i may check if i can port TWRP propretly?
Thanks
Thespartann said:
May you send me the erecovery so i may check if i can port TWRP propretly?
Thanks
Click to expand...
Click to collapse
how do i extract the .img from my device ? I cant find any tool for snapdragon
Fernandodx1000 said:
how do i extract the .img from my device ? I cant find any tool for snapdragon
Click to expand...
Click to collapse
If you can boot into Twrp then boot into it and try to make an Nandroid Backup of stock Recovery.
Thespartann said:
If you can boot into Twrp then boot into it and try to make an Nandroid Backup of stock Recovery.
Click to expand...
Click to collapse
I can't. Twrp can't mount storage or any partition.
Fernandodx1000 said:
I can't. Twrp can't mount storage or any partition.
Click to expand...
Click to collapse
I paid to download the stock rom. Downloading now, probably just got scam.
Fernandodx1000 said:
I paid to download the stock rom. Downloading now, probably just got scam.
Click to expand...
Click to collapse
Seriously?
Hopefully you don't get scammed.
You may send me the erecovery if its not an scam
You can extract it via Huawei update extractor.
Thespartann said:
Seriously?
Hopefully you don't get scammed.
You may send me the erecovery if its not an scam
You can extract it via Huawei update extractor.
Click to expand...
Click to collapse
here you have !
I have flashed erecovery and works !
https://mega.nz/#!6eplUQAB!K4hfh2s-b_sSVSJ_Xxg65sywdpJHNRKtzs2ZMRr2bVk
Fernandodx1000 said:
here you have !
I have flashed erecovery and works !
https://mega.nz/#!6eplUQAB!K4hfh2s-b_sSVSJ_Xxg65sywdpJHNRKtzs2ZMRr2bVk
Click to expand...
Click to collapse
Have you rooted it?
JiX666 said:
Have you rooted it?
Click to expand...
Click to collapse
I dont.
I bricked my huawei mate 10. Please help. TIA
me 2
You have to give more information if you want us to provide a viable (if there are any) solution. What firmware were you on, what firmware were you trying to install?
i was trying to install xposed
bootloop
me too please help
I'd really appreciate your help
I have a Huawei Mate 10 on Android Oreo 8.0 rooted and bootloader unlocked
Lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
Current build number:
System 8.0.0.38(0310)
Product model:
ALP-L29
I tried installing Xposed Framework ... after installation got in a bootloop
eRecovery doesn't work
I don't have TWRP
can only enter fastboot
the device has an SD card slot but I'm confused because some say upgrading or formatting it works and some say it doesn't .
I just want the device to boot ... I don't care about the data
please kindly help
thanks in advance
hero3210 said:
me too please help
I'd really appreciate your help
I have a Huawei Mate 10 on Android Oreo 8.0 rooted and bootloader unlocked
Lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
Current build number:
System 8.0.0.38(0310)
Product model:
ALP-L29
I tried installing Xposed Framework ... after installation got in a bootloop
eRecovery doesn't work
I don't have TWRP
can only enter fastboot
the device has an SD card slot but I'm confused because some say upgrading or formatting it works and some say it doesn't .
I just want the device to boot ... I don't care about the data
please kindly help
thanks in advance
Click to expand...
Click to collapse
More info:
fastboot oem get-product-model
...
(bootloader) ALP-L29
fastboot getvar vendorcountry
vendorcountry: hw/meafnaf
fastboot oem get-build-number
...
(bootloader) :System 8.0.0.38(0310)
fastboot getvar rescue_enter_recovery
getvar:rescue_enter_recovery FAILED (remote: FAIL:need all image flashed!)
fastboot oem oeminforead-SYSTEM_VERSION
...
(bootloader) :ALP-L29 8.0.0.128(C185)
please inform me of how to flash update.zip because I get an error
or place in in SD card because UPDATE.APP is more than 4GB ..
I think for the experienced, my problems are fairly easy to fix so please help ... I appreciate any suggestion. Thank you.
royhanks3 said:
You have to give more information if you want us to provide a viable (if there are any) solution. What firmware were you on, what firmware were you trying to install?
Click to expand...
Click to collapse
ALP-L29 bootloader unlocked.
Rooted
I am just struck in bootloop.
Erecovery doest help. I have the firmware(update.app) just tell me how to flash the stock rom i.e (update.app)
Thanks in advance.
Please help
Karthik1898 said:
ALP-L29 bootloader unlocked.
Rooted
I am just struck in bootloop.
Erecovery doest help. I have the firmware(update.app) just tell me how to flash the stock rom i.e (update.app)
Thanks in advance.
Please help
Click to expand...
Click to collapse
You need to unpack the update.app with Huawei Update Extractor and get the system.img.Then flash it with fastboot and check if it boots.
Pretoriano80 said:
You need to unpack the update.app with Huawei Update Extractor and get the system.img.Then flash it with fastboot and check if it boots.
Click to expand...
Click to collapse
How can this be done?
Tumpster said:
How can this be done?
Click to expand...
Click to collapse
I've just told you in my previous post, lol.
Use this guide - > https://forum.xda-developers.com/mate-10/how-to/guide-extracting-stock-firmware-files-t3756733 <- to extract the system.img and then flash the image with this command : fastboot flash system system.img
Then reboot the with "fastboot reboot" command and hope that your system boots.
I bricked my Huawei Mate 10 too
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Carnage! said:
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
As i know you cannot downgrade from pie to oreo try to flash back the pie files as u did before with HWOTA8 and see if the devise boot
Carnage! said:
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
Flash back stock pie kernel. Hwota flashes recovery and kernel (and ramdisk which fails because there is no ramdisk partition in pie). If kernel doesn't work because its corrupt or wrong (pie kernel is 4.9 while Oreo use 4.4) your device can't boot recovery or boot to system.
You can downgrade using TWRP but you'd have to do it manually.
Antidote03 said:
As i know you cannot downgrade from pie to oreo try to flash back the pie files as u did before with HWOTA8 and see if the devise boot
Click to expand...
Click to collapse
Thanks for the suggestion. I tried flashing back the pie files using HWOTA8 but the software requires you to boot to recovery in order for the installation to continue but the device won't boot to recovery, it's just stuck on device is booting now screen.
---------- Post added at 11:42 AM ---------- Previous post was at 11:39 AM ----------
ante0 said:
Flash back stock pie kernel. Hwota flashes recovery and kernel (and ramdisk which fails because there is no ramdisk partition in pie). If kernel doesn't work because its corrupt or wrong (pie kernel is 4.9 while Oreo use 4.4) your device can't boot recovery or boot to system.
You can downgrade using TWRP but you'd have to do it manually.
Click to expand...
Click to collapse
Thanks for the explanation. At least I have an idea now what caused the issue . If it's fine do you have the steps or link which provides steps how to downgrade using TWRP?
Carnage! said:
Thanks for the explanation. At least I have an idea now what caused the issue . If it's fine do you have the steps or link which provides steps how to downgrade using TWRP?
Click to expand...
Click to collapse
Look here - > https://forum.xda-developers.com/mate-10/how-to/how-people-bricked-phone-rebranding-ota-t3797555 <- use the Huawei Update Extractor tool to get the image files than flash with fastboot.
kernel = fastboot flash kernel kernel.img
system = fastboot flash system system.img
recovery = fastboot flash recovery_ramdisk recovery.img
Obviously, replace image name with the ones you are using.
For downgrading, download this tool - > https://mega.nz/#!oxkQWApD!-PtLtrekX3DS-iglnr7xpdB1285dF1nZSiOSHyZsqKA <- unpack it on your PC, launch Flash.bat and follow the On Screen instructions .
Now you got it why you shouldn't spam threads? You get answers all over the forum, which is not nice.
Pretoriano80 said:
Look here - > https://forum.xda-developers.com/mate-10/how-to/how-people-bricked-phone-rebranding-ota-t3797555 <- use the Huawei Update Extractor tool to get the image files than flash with fastboot.
kernel = fastboot flash kernel kernel.img
system = fastboot flash system system.img
recovery = fastboot flash recovery_ramdisk recovery.img
Obviously, replace image name with the ones you are using.
For downgrading, download this tool - > https://mega.nz/#!oxkQWApD!-PtLtrekX3DS-iglnr7xpdB1285dF1nZSiOSHyZsqKA <- unpack it on your PC, launch Flash.bat and follow the On Screen instructions .
Now you got it why you shouldn't spam threads? You get answers all over the forum, which is not nice.
Click to expand...
Click to collapse
Thanks for the steps. I will try it later and will let you know. I really apologize for spamming since I panicked and I don't know where to get help. I will continue and reply to this thread only moving forward.
Carnage! said:
Thanks for the steps. I will try it later and will let you know. I really apologize for spamming since I panicked and I don't know where to get help. I will continue and reply to this thread only moving forward.
Click to expand...
Click to collapse
I would start with just flashing kernel. Flashing system can disable Oem unlock, which will result in frp lock in fastboot.
@Pretoriano80
Thx this has Fixed my Phone
In Huawei Service Center they are not able to fix the Firmwarefail *rofl*
ante0 said:
I would start with just flashing kernel. Flashing system can disable Oem unlock, which will result in frp lock in fastboot.
Click to expand...
Click to collapse
I think he already flashed system once! ?
ante0 said:
I would start with just flashing kernel. Flashing system can disable Oem unlock, which will result in frp lock in fastboot.
Click to expand...
Click to collapse
Got it. Thanks again for all the help!
Please need help to unbrick my phone model dub-lx2 . i tried to flash system, ramdisk, ramdisk recovery, kernel via fastboot. no errors but system don't boot. i tried to update by dload but every time uodate fail. i don't konw how or Wich uppdate.app to restore the stock system.
Phone no not booting only fastboot command works
Delhamito said:
Please need help to unbrick my phone model dub-lx2 . i tried to flash system, ramdisk, ramdisk recovery, kernel via fastboot. no errors but system don't boot. i tried to update by dload but every time uodate fail. i don't konw how or Wich uppdate.app to restore the stock system.
Phone no not booting only fastboot command works
Click to expand...
Click to collapse
How did you unlock the bootloader?
Sent from my HUAWEI DUB-LX1 using XDA Labs
Paid service 4$ : ministryofsolutions.com/huawei-bootloader
Please if u have sotck rom or system backup please share it could not find firmware for this model only online update
Did you fix it??
Delhamito said:
Paid service 4$ : ministryofsolutions.com/huawei-bootloader
Please if u have sotck rom or system backup please share it could not find firmware for this model only online update
Click to expand...
Click to collapse
Delhamito said:
Please need help to unbrick my phone model dub-lx2 . i tried to flash system, ramdisk, ramdisk recovery, kernel via fastboot. no errors but system don't boot. i tried to update by dload but every time uodate fail. i don't konw how or Wich uppdate.app to restore the stock system.
Phone no not booting only fastboot command works
Click to expand...
Click to collapse
If you need help you should post here your mobile build number .you have to convert Update.app file to raw-xml file and correct loader for flash.if you have umt qfire tool then you can unbrick your phone .:good:
i can easy unbrick dub-lx,
Huawei y7 pro สามารถใช้แอป King Root ใด้ใหมครับ
I have unlocked the bootloader after that I have installed the twrp and wanted to have the magisk too.
but unfortunately when flashed magisk zip phone got bricked and didnt boot into recovery just go into fastboot (btw the recovery i flashed was also temporary as it has been gone every time i restart and i have to again reflash the recovery) kindly help me how to unbrick my phone????? tried many method found online all in vain.
I was using realme ui 1.0.
So you have unlocked bootloader from ui 1.0 and flash twrp and try to root. Perhaps the magisk is not for ui 1.0. Can you still go into twrp and flash ui 1.0 (c.03) or downgrade? BTY your phone is India version, right?
donkeyman1234 said:
So you have unlocked bootloader from ui 1.0 and flash twrp and try to root. Perhaps the magisk is not for ui 1.0. Can you still go into twrp and flash ui 1.0 (c.03) or downgrade? BTY your phone is India version, right?
Click to expand...
Click to collapse
yeah still i can go to twrp but unable to install the officiAL rom as twrp does not recognizing ozip file so what to do now? i have global version.
So you used stock recovery to flash india version ui 1.0 and unlock the bootloader and flash twrp, that sounds great. Just try to change ozip to zip and see twrp do.
---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------
Sajidmaibal said:
yeah still i can go to twrp but unable to install the officiAL rom as twrp does not recognizing ozip file so what to do now? i have global version.
Click to expand...
Click to collapse
rename ozip to zip, see if twrp works? And can you show me your phone version?
donkeyman1234 said:
So you have global version then you used stock recovery to flash india version ui 1.0 and unlock the bootloader and flash twrp, that sounds great. Just try to change ozip to zip and see twrp do, because I can't unlock the bootloader for my global version. Maybe you can show us how you unlock the global version steps by steps.
---------- Post added at 12:31 PM ---------- Previous post was at 12:29 PM ----------
rename ozip to zip, see if twrp works? And can you show me your phone version?
Click to expand...
Click to collapse
unfortunately i have hard bricked my phone. dont know thinking what i just tried to lock the bootloader and boom. now just boot/recovery destroyed screen appears on the screen. any soln:crying:? or i have to wait till this corona pandemic over nd get it done from service centre??
Sajidmaibal said:
unfortunately i have hard bricked my phone. dont know thinking what i just tried to lock the bootloader and boom. now just boot/recovery destroyed screen appears on the screen. any soln:crying:? or i have to wait till this corona pandemic over nd get it done from service centre??
Click to expand...
Click to collapse
unlocking bootlaoder is easy
1. you need in dept test app latest one
2. submit for review
3. review will get successful in 10/20 mins
4. then just follow the normal procedure for unlocking
kindly follow these vidoes for reference
https://youtu.be/dW4yKt6Xtss
https://youtu.be/V-4ArXEmySM
Sajidmaibal said:
yeah still i can go to twrp but unable to install the officiAL rom as twrp does not recognizing ozip file so what to do now? i have global version.
Click to expand...
Click to collapse
So you hard bricked you phone by locking bootloader.
Maybe you should take it to service center.
Flash twrp 3316 IMG..it will flash ozip
Had boot/recovery destroyed message after attempting to flash a gsi. I followed the unbrick guide. I can access fastboot & boot into recovery, however touch input is not working so I'm unable to do anything. Phone sticks on the realme screen when attempting to let it boot. Any ideas? I live in the US so a service center isn't possible.
XDA seems pretty dead these days. Shame.
J-Mizzle said:
XDA seems pretty dead these days. Shame.
J-Mizzle said:
Had boot/recovery destroyed message after attempting to flash a gsi. I followed the unbrick guide. I can access fastboot & boot into recovery, however touch input is not working so I'm unable to do anything. Phone sticks on the realme screen when attempting to let it boot. Any ideas? I live in the US so a service center isn't possible.
Click to expand...
Click to collapse
it happened to me too. i can help you. first boot into fastboot and use ur computer to flash twrp using command "fastboot flash recovery (attach twrp img here) then boot into recovery which should be twrp and then download orangefox recovery for realme xt. it should be a zip file so just install it using twrp. Then get the official realme xt ozip from their website boom orangefox should install it then wipe data once again.. then start your system. if it goes into recovery again just wipe data again and it should work.
Click to expand...
Click to collapse
any update here guys? bricked my phone on relocking bootloader.
Long story short, I accidentally formatted everything while trying to flash Stock ROM using SP Flash Tool.
Now I'm having the "Download not completed" error at boot.
I tried solving it by flashing oppo_cutsom which didn't do any good, and after I took it to repairs, they told me I need the original NVRAM & NVDATA
which I can't find anywhere online (at least, not for free -_-).
Can someone please share their Narzo 30A's NVRAM & NVDATA with me?
Thanks in advance
@RealmeNarzo30AUpdates Do a search on Telegram and you will find what you want only for realme Narjo 30a:
Shubham 786 said:
@RealmeNarzo30AUpdates Do a search on Telegram and you will find what you want only for realme Narjo 30a:
Click to expand...
Click to collapse
Thanks, I'll check it out
mouradsme said:
Long story short, I accidentally formatted everything while trying to flash Stock ROM using SP Flash Tool.
Now I'm having the "Download not completed" error at boot.
I tried solving it by flashing oppo_cutsom which didn't do any good, and after I took it to repairs, they told me I need the original NVRAM & NVDATA
which I can't find anywhere online (at least, not for free -_-).
Can someone please share their Narzo 30A's NVRAM & NVDATA with me?
Thanks in advance
Click to expand...
Click to collapse
You can't rip bro
If you done anyhow your imei will be still gone
iamshubh69 said:
You can't rip bro
If you done anyhow your imei will be still gone
Click to expand...
Click to collapse
I managed to get the "Download not completed" fixed, but now I'm in a different kind of bootloop, and I think I need a "verified" version of recovery.img...Where can I find it?
mouradsme said:
I managed to get the "Download not completed" fixed, but now I'm in a different kind of bootloop, and I think I need a "verified" version of recovery.img...Where can I find it?
Click to expand...
Click to collapse
Ask someone on narzo 30a telegram group for stock recovery img it might work
iamshubh69 said:
Ask someone on narzo 30a telegram group for stock recovery img it might work
Click to expand...
Click to collapse
I already did
thank you for taking the time on this
iamshubh69 said:
Ask someone on narzo 30a telegram group for stock recovery img it might work
Click to expand...
Click to collapse
I just managed to install PBRP recovery onto my device, and I accessed it then went straight to Fastboot option (I wanted to flash the stock ROM using realme flash tool), but my PC couldn't detect the device (not Fastboot, nor ADB) although it detects other android phones.
Anyways, since that didn't work - I tried installing PixelExperience (It worked before on my phone, so I thought it would work again but after rebooting the phone didn't even boot).
I then flashed the original dtbo.img, but there's no system,, only the recovery.
Any idea how to fix this?
mouradsme said:
I just managed to install PBRP recovery onto my device, and I accessed it then went straight to Fastboot option (I wanted to flash the stock ROM using realme flash tool), but my PC couldn't detect the device (not Fastboot, nor ADB) although it detects other android phones.
Anyways, since that didn't work - I tried installing PixelExperience (It worked before on my phone, so I thought it would work again but after rebooting the phone didn't even boot).
I then flashed the original dtbo.img, but there's no system,, only the recovery.
Any idea how to fix this?
Click to expand...
Click to collapse
Can you send fast boot mode pic to me it might help
First of all, thanks for guiding me to that group on Telegram (I found the stock recovery there, and I could flash the .ozip thanks to it) but I only managed to make it boot to the yellow RealMe logo, and now it stays there until it reboots on its own. What could I have done wrong? (I did wipe data/reset everything before starting to flash the ROM).
mouradsme said:
First of all, thanks for guiding me to that group on Telegram (I found the stock recovery there, and I could flash the .ozip thanks to it) but I only managed to make it boot to the yellow RealMe logo, and now it stays there until it reboots on its own. What could I have done wrong? (I did wipe data/reset everything before starting to flash the ROM).
Click to expand...
Click to collapse
Try fastboot -w in fastboot mode seems like encryption issue
iamshubh69 said:
Try fastboot -w in fastboot mode seems like encryption issue
Click to expand...
Click to collapse
I have no access to fastboot,
can I use Mtkclient and erase usedata instead?
Edit:
I noticed that after flashing PBRP recovery, and choosing the fastboot option, the devices is detected in fastboot mode (via command "fastboot devices") for like 2 seconds, then it loses connection. Any idea why?
Okay I just revived the phone,
What I was missing for it to boot was the original oppo_custom image,
For those who haven't got a backup, here's the one I used to restore my phone:
Realme_Narzo_30A_oppo_custom.rar
drive.google.com