Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone.
They can't able to Flash update through stock settings OR via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth.
So here is the process to flash any incremental update via twrp just we need update zip, vbmeta image and boot image of old oos version respective to your new update means if. We are upgrading to V11 we need V10 boot img
U can use following commands to extract your current stock boot img after connecting to PC
adb shell
dd if=/dev/block/sdc49 of=/sdcard/boot.img
exit
Note: Remember this process will replace your twrp and removes root to gain root access. We need to repeat twrp installation shown in the following tutorial
TUTORIAL TWRP AND ROOT NORD 2 OXYGEN OS 11 ( Links updated!)
SO finally I successfully rooted with TWRP and root access.thanks to all developers @Eastw1ng @TheMalachite Following are all download links combined in one post Also there are two threads like unlocking boot loader and twrp but there are some...
forum.xda-developers.com
You can gain root acess only by flashing magisk.zip file after step no 7 given under instructions but I didn't tested it yet.
DOWNLOADS:
1)Download update v11 from Telegram :
®D$ in OnePlus Nord 2 Community
t.me
2) DOWNLOAD V13:
®D$ in OnePlus Nord 2 Community
t.me
3) Download V14 update zip:
️ in OnePlus Nord 2 Community
t.me
4) Download A15 update zip:
e9708c8610bae8fa64d76e0f9a55dda444ce981a.zip
drive.google.com
We can also download update in system update process. Just download OTA update and when we boot in twrp just click install and then go to following folder there you will find update.zip
/data/OTA-package/update.zip
5)A17 update zip:
https://t.me/OnePlusNord2GlobalOfficial/81364
Download vbmeta:
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download boot.img:
1) upgrade from v10 to v11(indian)
boot.img
drive.google.com
2) upgrade from v11 to v13(indian)
bootnew.img
drive.google.com
3)Upgrade from v13 to v14:
Rose in OnePlus Nord 2 Community
t.me
4)Upgrade from A14 to A15:
Rose in OnePlus Nord 2 Community
t.me
5)15 Boot img india (update from A15 to AA16)
https://t.me/OnePlusNord2GlobalOfficial/57795
5)A16 boot.img to upgrade to A17:
Rose in OnePlus Nord 2 Community
A16 stock boot image
t.me
6)17 BOOT IMG Upgrade to A18 (boot.img vbmeta zip extract file)
Rose in OnePlus Nord 2 Community
t.me
Boot img for nord 2 EU REGION :
File folder on MEGA
mega.nz
This another thread for all boot img of EU region
Stock Boot & Patched images Oneplus Nord 2 Oxygen 11.3 DN2103_11_A.07/09/10 EEA
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process! https://mega.nz/folder/fZx2nBaR#Q33lJstFRMQg6_0j7Z0TJw Special Thanks: @HofaTheRipper @phhusson
forum.xda-developers.com
Instructions :
1) Download all file from the link given under this thread place them at one place on your phone so it can be easily accessible when we boot in TWRP.
2)Now to boot in TWRP use following root acess app called as advance reboot. Open it and click reboot to recovery
Advanced Reboot Tools [ROOT] - Apps on Google Play
Provides lots of options for restarting your device; excellent for tweakers.
play.google.com
Or you can use adb command after connecting phone to pc in USB debugging mode.
adb reboot recovery
3) when phone boot in TWRP click install tab now go to folder where we placed All files.
4) click install image tab at bottom now you we see image files boot. img and vbmeta.img that we downloaded
5)now select boot.img and then select boot partation and slide bottom bar after successful installation
6)click reboot and select recovery phone will boots back to twrp( This step is optional)
7)Now again click Install and find our old folder now select update.zip file and slide bottom bar it will take 2min for complete falshing of zip.
8)now agian click install now click install image and select vbmeta.img
9)Now click reboot system phone will reboots and take 10min.
Now you are successfully updated and have new OOS 11.3 A11 version on your phone without any issues.
Follow the video:
New update v13 update process :
New update A14 update process:
New update A15:
New update A16:
New A18 update:
pankspoo said:
Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone.
They can't able to Flash update via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth.
So here is the process to flash any incremental update via twrp just we need update zip, vbmeta image and boot image of old oos version respective to your new update means if. We are upgrading to V11 we need V10 boot img.
Follow the video:
Click to expand...
Click to collapse
good Instructions! Reboot after flashing boot.img isnt necessary. OTA Update zip can be downloaded within OTA App in Settings (do not press reboot). After downloading you can reboot to TWRP and the file location is: /data/OTA-package/update.zip.
HofaTheRipper said:
good Instructions! Reboot after flashing boot.img isnt necessary. OTA Update zip can be downloaded within OTA App in Settings (do not press reboot). After downloading you can reboot to TWRP and the file location is: /data/OTA-package/update.zip.
Click to expand...
Click to collapse
Yes but I don't want to go to automatic reboot and flashing process of OTA Update installation after download which may cause some issues for new users.
The old boot.img I image is the stock one not rooted right? How can you extract it from your firmware if you're not rooted? From the Nandroid backup maybe?
Edit, found out: https://forum.xda-developers.com/t/how-to-extract-your-boot-img-from-any-rom-adb.3760210/ Just had to google it
Don't wo
Raygen said:
The old boot.img I image is the stock one not rooted right? How can you extract it from your firmware if you're not rooted? From the Nandroid backup maybe?
Click to expand...
Click to collapse
Donts worry from here every new updates we will provide all stock boot. img
Thread updated for latest update v13 for India region
HI. This is my 1st OnePlus and OxygenOS. I am now on DN2103_11_A.11 and OTA is available. It is DN2103_11_A.12
Basically I can flash it from TWRP and I do not need to save and flash boot.img afterwards bec OS will be the same version. Is that so? Or am I wrong? And I have to follow threads instructions ?
Thank you
jis251 said:
HI. This is my 1st OnePlus and OxygenOS. I am now on DN2103_11_A.11 and OTA is available. It is DN2103_11_A.12
Basically I can flash it from TWRP and I do not need to save and flash boot.img afterwards bec OS will be the same version. Is that so? Or am I wrong? And I have to follow threads instructions ?
Thank you
Click to expand...
Click to collapse
NO u need A11 boot img of only DN 2103 firmware not indian I don't have that now first flash that then flash update zip of v12 then flash Vbmeta now that's done
pankspoo said:
NO u need A11 boot img of only DN 2103 firmware not indian I don't have that now first flash that then flash update zip of v12 then flash Vbmeta now that's done
Click to expand...
Click to collapse
HI. And thx for quick reply. I mange now, thank you.
DN2103 A.11 stock boot img :
HofaTheRipper said:
DN2103 A.11 stock boot img :
Click to expand...
Click to collapse
You got it do it now
HofaTheRipper said:
DN2103 A.11 stock boot img :
Click to expand...
Click to collapse
HI and thx. I have made TWRP backup, boot and vbmeta
So I can first restore boot then flash OTA and then restore vbmeta, yes? (Version 11)
I do not have to flash boot and vbmeta, restore does the same??
jis251 said:
HI and thx. I have made TWRP backup, boot and vbmeta
So I can first restore boot then flash OTA and then restore vbmeta, yes? (Version 11)
I do not have to flash boot and vbmeta, restore does the same??
Click to expand...
Click to collapse
Don't use backup boot image restore process.
Just download above boot image given
https://forum.xda-developers.com/attachments/boot_stock_a11-img.5461307/
and vbmeta image given in. My thread
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
And u r update zip of device of your region not mine
First flash boot img then. Install update zip then. Flash Vbmeta done
pankspoo said:
Don't use backup boot image restore process.
Just download above boot image given
https://forum.xda-developers.com/attachments/boot_stock_a11-img.5461307/
and vbmeta image given in. My thread
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
And u r update zip of device of your region not mine
First flash boot img then. Install update zip then. Flash Vbmeta done
Click to expand...
Click to collapse
Thx. OK I do that.
Magisk is installed (patched) to boot image so after OTA and Vbmeta I flash Magisk to keep root.
jis251 said:
Thx. OK I do that.
Magisk is installed (patched) to boot image so after OTA and Vbmeta I flash Magisk to keep root.
Click to expand...
Click to collapse
Yes
pankspoo said:
Download boot.img:
1) upgrade from v10 to v11(indian)
boot.img
drive.google.com
2) upgrade from v11 to v13(indian)
bootnew.img
drive.google.com
Click to expand...
Click to collapse
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
NetSoerfer said:
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
Click to expand...
Click to collapse
Ok I will upload in thread
NetSoerfer said:
Do the boot.img files in the original post only work on the Indian variant? Where can I get the A11 boot.img for the European variant if I want to update to A12?
Click to expand...
Click to collapse
File folder on MEGA
mega.nz
Use boot images from stock folder
pankspoo said:
U can use following commands to extract your current stock boot img after connecting to PC
adb shell
dd if=/dev/block/sdc49 of=/sdcard/boot.img
exit
Click to expand...
Click to collapse
Still trying to wrap my head around this (although updating worked fine from A11 to A12 on my EEA variant, thanks @pankspoo!).
Can I actually extract a stock boot.img from a Magisk-rooted phone? Is it stock (in which case why is root removed by the update.zip) or is it modified (in which case, why can I extract it as stock)?
NetSoerfer said:
Still trying to wrap my head around this (although updating worked fine from A11 to A12 on my EEA variant, thanks @pankspoo!).
Can I actually extract a stock boot.img from a Magisk-rooted phone? Is it stock (in which case why is root removed by the update.zip) or is it modified (in which case, why can I extract it as stock)?
Click to expand...
Click to collapse
You can use those adb commands while booted in TWRP, without being rooted. So you'll extract the stock boot image
Related
Before rooting, you'll need an unlocked bootloader. Check my previous guide here: https://forum.xda-developers.com/x3...ck-bootloader-realme-x3-t4136325/post83109505.
After unlocking, we can get started with rooting.
First, you'll want to install Magisk Manager. You can find the latest APK here: https://github.com/topjohnwu/magisk/releases.
Next, you'll need to download the latest OTA OZIP. There's a link at the end of the post for this.
While that's downloading, you'll also need to grab a copy of an OZIP extractor. Follow the link below, download the repository as a ZIP, and unzip it.
For this program to work, you'll need Python 3 installed. On Linux systems, it should already be installed. On Windows 10, you can install Python from the Store.
Open a terminal or CMD window and cd to where you extracted the OZIP extractor files.
Use pip to install the docopt module: "pip3 install docopt".
Once the OZIP has finished downloading, move it to the same folder as the extractor program.
Run the following command: "python3 ozipdecrypt.py NAME_OF_OZIP_FILE". This will take a while!
Once it's done extracting, there will be a ZIP file with the same name as the OZIP. We only need two files from here: boot.img and vbmeta.img.
Extract those two files to the same folder as the extractor program.
Copy the boot.img file to your device.
Open Magisk Manager and choose the "INSTALL" option next to the Magisk status. Tap "INSTALL" in the dialog that appears and then choose "Select and Patch a File."
Browse to where you copied your boot.img to and select it. Magisk will now patch it and create a file named magisk_patched.img in your Download folder. Copy magisk_patched.img back to your computer.
Reboot your phone into fastboot: "adb reboot bootloader". If you don't have ADB or fastboot installed (which you should, since you needed them for the previous guide), you can find the link in the bootloader unlocking guide.
Before you flash the patched boot image, you need to disable image verification, which is where the vbmeta.img comes in.
Run "fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification" (remember, you'll probably need to unplug and replug the device after hitting Enter). This will disable boot verification and allow the patched image to actually work.
Finally, run "fastboot flash boot magisk_patched.img". This will flash the rooted boot image to your device.
Run "fastboot reboot" and let the phone boot back into the system. Check Magisk Manager and you should now be rooted!
Troubleshooting:
If you get an error that the boot image was "destroyed," don't worry. You'll just need to flash the stock boot.img and try again. Unplug your phone from your computer and wait for it to turn off. Once the screen is black, hold down VOL-DWN and PWR to enter fastboot mode. You can then run "fastboot flash boot boot.img" (where boot.img is the stock image) to restore. Reboot, then try the vbmeta and patched image flashing again.
You can get the OTA OZIPs from Realme EU's site: https://www.realme.com/eu/support/software-update.
You can get an OZIP extractor from here: https://github.com/bkerler/oppo_ozip_decrypt. (NOTE: you'll need to install the "docopt" Python module.)
OZIPs contain a boot.img, which you can extract and patch with Magisk for root. If someone else has an idea for patching Magisk into the boot.img, this is where to start.
Here's my patched boot.img for A.32. I don't recommend using this on other versions: https://www.androidfilehost.com/?w=files&flid=315334
Could you share your patched boot.img for the latest OS version? And could you check if the aux magisk module from X2 pro works to activate all aux cameras in Gcam? Thanks
Patched boot image
Thanks Zacharee1....Could someone upload the patched boot image for the latest one? Also do we have a generic version of twrp that can be installed on x3 ?? If yes, then we could try installing havoc gsi...
I've added a link to a patched A.32 boot.img.
also needed pip install pycryptodome win10
Zacharee1 said:
I've added a link to a patched A.32 boot.img.
Click to expand...
Click to collapse
Thanks a ton Zacharee!!
But it seems like I have A.33 version (https://www.realme.com/in/support/software-update)
I wish we had a video guide or something. Does anyone have a patched A.33 boot.img?
cheth20 said:
Thanks a ton Zacharee!!
But it seems like I have A.33 version (https://www.realme.com/in/support/software-update)
I wish we had a video guide or something. Does anyone have a patched A.33 boot.img?
Click to expand...
Click to collapse
It's pretty simple to patch it yourself. Download the OZIP, use the Python tool to unencrypt it, take the boot.img file out of the created ZIP, copy it to your device, and then patch with with Magisk Manager.
https://drive.google.com/file/d/1Od99thSd_a8sCOSpDYb0KyBLOzREiG76/view?usp=sharing
From Software Update - realme (India)
Firmware for RMX2085
I have RMX2085 model. So installing RMX2081 would be okay?
Actually I installed GSI ROM after this and now stuck with boot animation loops. Any idea if it would be okay to flash 2081 ROM else where can I get the one for 2085 version?
sukhad86 said:
https://drive.google.com/file/d/1Od99thSd_a8sCOSpDYb0KyBLOzREiG76/view?usp=sharing
From Software Update - realme (India)
Click to expand...
Click to collapse
cheth20 said:
I have RMX2085 model. So installing RMX2081 would be okay?
Actually I installed GSI ROM after this and now stuck with boot animation loops. Any idea if it would be okay to flash 2081 ROM else where can I get the one for 2085 version?
Click to expand...
Click to collapse
The firmware is the same for them all.
Great thread @Zacharee1. I have been waiting for this!
I have one question - is it mandatory to download the OTA package and do the patching? Is it because of the absence of recovery software like TWRP yet, for the X3 Super Zoom?
phonedroid said:
Great thread @Zacharee1. I have been waiting for this!
I have one question - is it mandatory to download the OTA package and do the patching? Is it because of the absence of recovery software like TWRP yet, for the X3 Super Zoom?
Click to expand...
Click to collapse
Yes, and that's why. It might be possible to pull the boot image directly from your device, but I'm not sure.
Can someone tell me if I can use realme 6 pro vbmeta.img?
realme x3 super zoom twrp recovery bro give me
Hi Sukhad,
I updated the system to the latest OTA (39), but I do not have the latest magisk patched file. Could you kindly help me with latest version patched boot for x3 superzoom?
sukhad86 said:
https://drive.google.com/file/d/1Od99thSd_a8sCOSpDYb0KyBLOzREiG76/view?usp=sharing
From Software Update - realme (India)
Click to expand...
Click to collapse
Thanks Zacharee1!
Finally did it (15/20 year old windows machines... Win7 was dificult and finally use a win8). Worth big as root gives me a new smartphone
Had all sorts of problems (installing python... But once installed was pretty quick) mainly adb conneting...
Anyway I will share vbmeta.img attached for a38 rom.
Also link to boot img, again a38.
For A38 rom
http://www.mediafire.com/file/i9jvl1al95k40vv/magisk_patched_a38.img/file
bro please could u tell me.. help
cheth20 said:
I have RMX2085 model. So installing RMX2081 would be okay?
Actually I installed GSI ROM after this and now stuck with boot animation loops. Any idea if it would be okay to flash 2081 ROM else where can I get the one for 2085 version?
Click to expand...
Click to collapse
bro please could u tell me.. after unlocking the bootloader of realme X3 superzoom , does it breaks the fingerprint sensor?
ota update after root
Someone have experiencing ota update failed on rooted device with this procedure? I m on RMX2081EU_11.A.40 but ota update to RMX2081EU_11.A.42 fails. how to update now?
Good afternoon. I want to get a root for my X3 super zoom, but I literally do not understand all the manipulations so that your description is attached with an image (screenshots). I think it will be useful for everyone who can't.
Anyone have working patched boot.img for a46?? I'm trying and always boot destroyed. Magisk 21.4
It's really weird on official en site there is a42 soft from September but on pl site there is a46 from December.
That device can't install TWRP yet, so only method that OPN users have to root his phones is that:
https://forum.xda-developers.com/oneplus-nord/how-to/guide-how-to-root-oneplus-nord-t4139411
I think to simplyfy that method in two scripts, one to extract payload.bin and root your phone, and another to convert that extracted payload.bin to fastboot installable ROM.
Make sure that you have python installed in your computer before use it.
Here is the steps to use it:
1. Download any OxygenOS update from Some_Random_Username's Repo:
https://forum.xda-developers.com/oneplus-nord/how-to/oneplus-nord-repo-oxygen-os-builds-t4138085
2. Download the script:
English v1 version for Windows: https://www.androidfilehost.com/?fid=8889791610682922150
Spanish v1 version for Windows: https://www.androidfilehost.com/?fid=8889791610682922151
3. Extract the script on any folder
4. Extract "payload.bin" file from OxygenOS update, downloaded previously on step 1
5. Execute "payload.bat" and follow the steps on the script
OPTIONAL: After root your phone or extract "payload.bin" file, you can use "flash-all.bat" file from scripts file to flash whole OxygenOS update from fastboot mode!
TIPS:
- As Some_Random_Username said, you should backup your /persist once rooted (dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img) and save it somewhere on your cloud/computer, because this might save you from a broken fingerprint sensor and an RMA in the future if it turns out this device has same issue as 8-series when it comes to crossflash regional builds of OOS.
This step will be include to the script in the future
Credits:
@topjohnwu for making Magisk
@Some_Random_Username for original guide and updated repo build of Oxygen OS
@mauronofrio for original fastboot script
Reserved
You can fastboot boot twrp.img and then flash magisk, so flashing a boot image is not the only way to root.
Yup:good:
The fastboot roms are already available in the dedicated thread and with the twrp i made you can flash magisk and also stock roms, i really don't know at what this is needed
mauronofrio said:
The fastboot roms are already available in the dedicated thread and with the twrp i made you can flash magisk and also stock roms, i really don't know at what this is needed
Click to expand...
Click to collapse
goRt said:
You can fastboot boot twrp.img and then flash magisk, so flashing a boot image is not the only way to root.
Click to expand...
Click to collapse
I know that fastboot roms is already in the dedicated thread, but maybe isn't updated or any people want to extract himself (for example, now you don't have latest 10.5.5 version uploaded!)
Also with TWRP, you can't install it as normal recovery yet, so maybe people want to do and try it with fastboot method, and can use my script for help himselves.
That is another and automated method to help people only
dimusa said:
I know that fastboot roms is already in the dedicated thread, but maybe isn't updated or any people want to extract himself (for example, now you don't have latest 10.5.5 version uploaded!)
Also with TWRP, you can't install it as normal recovery yet, so maybe people want to do and try it with fastboot method, and can use my script for help himselves.
That is another and automated method to help people only
Click to expand...
Click to collapse
Twrp can also be flashed if needed
VERY IMPORTANT:
Please make sure your boot.img version matches the ROM version . that's mean if you update your device then you have to use patch boot.img from new recovery rom.never use the old one. If they mismatch you might brick your phone and MediaTek phones are HELL to unbrick.
YOU HAVE BEEN WARNED.
Yes you can root your phone without data loss. You do not need to you type so much command line. You have to patch the stock boot image file with magisk manager. Then you have to download a a blank vbmeta.img file.(link in this post)
Then run this command
fastboot flash vbmeta vbmeta.img
fastboot flash boot patch-boot.img
%%replace patch-boot as your file name...
I guarantee you no data loss.
Remember one thing...
You must patch the correct boot image of your rom... If you to flash a wrong version of bhoot image then you have some problem.
Suppose you update miui global 11.0.5.0 from 11.0.4.0 and you use 11.0.4.0 version patch boot image file....
Then your device boot up but you can not play any music .....i do this dump thing.....but do not worry just flash currect patch boot image and your problem is gone...
Shas45558 said:
Yes you can root your phone without data loss. You do not need to you type so much command line. You have to patch the stock boot image file with magisk manager. Then you have to download a a blank vbmeta.img file.
https://forum.hovatek.com/thread-32719.html
Go to method 3....log in to download vbmeta.img file.
Then run this command
fastboot flash boot patch-boot.img
fastboot flash vbmeta vbmeta.img
%%replace patch-boot as your file name...
I guarantee you no data loss.
Remember one thing...
You must patch the correct boot image of your rom... If you to flash a wrong version of bhoot image then you have some problem.
Suppose you update miui global 11.0.5.0 from 11.0.4.0 and you use 11.0.4.0 version patch boot image file....
Then your device boot up but you can not play any music .....i do this dump thing.....but do not worry just flash currect patch boot image and your problem is gone...
Click to expand...
Click to collapse
Hey @Shas45558, I can't root MIUI V11.0.7.0.Q having tried these steps on a friend's phone yesterday. It worked on my phone on V11.0.50.Q but I also installed that update though my bootloader is still locked as you may know
nielsync said:
Hey @Shas45558, I can't root MIUI V11.0.7.0.Q having tried these steps on a friend's phone yesterday. It worked on my phone on V11.0.50.Q but I also installed that update though my bootloader is still locked as you may know
Click to expand...
Click to collapse
Do u flash vbmeta.img?? (Download from this post)
It workes for me every time...
When any update appires you should download full recovery rom reather then otq update.
Then extract and patch boot which is insiDe the recovery rom...
It will must work...
Shas45558 said:
Do u flash vbmeta.img?? (Download from this post)
It workes for me every time...
When any update appires you should download full recovery rom reather then otq update.
Then extract and patch boot which is insiDe the recovery rom...
It will must work...
Click to expand...
Click to collapse
That's exactly what I did. Downloaded the full recovery rom and extracted it. Patched the boot.img inside images folder with Magisk canary and after copied it to my PC and flashed it via fastboot. I then flashed the vbmeta after. Do you mind sharing with me your patched boot image for V.11.0.7Q? Maybe I'll have luck with that otherwise I did everything right. Its really strange.
nielsync said:
That's exactly what I did. Downloaded the full recovery rom and extracted it. Patched the boot.img inside images folder with Magisk canary and after copied it to my PC and flashed it via fastboot. I then flashed the vbmeta after. Do you mind sharing with me your patched boot image for V.11.0.7Q? Maybe I'll have luck with that otherwise I did everything right. Its really strange.
Click to expand...
Click to collapse
You should use your phone and magisk manager To patch boot image file...
Do not use computer to patch it
I give the boot file in this post which root your redmi 9 based on global v11.0.7.0....
Do not flash it on outher version...
Extract mboot7.tar you get mboot7.img....
Flash it and enjoy root on globalv11.0.7.0....
Do not forget to flash vbmeta.img....
Flash vbmeta file then patch boot file..
Good luck..
Shas45558 said:
You should use your phone and magisk manager To patch boot image file...
Do not use computer to patch it
I give the boot file in this post which root your redmi 9 based on global v11.0.7.0....
Do not flash it on outher version...
Extract mboot7.tar you get mboot7.img....
Flash it and enjoy root on globalv11.0.7.0....
Do not forget to flash vbmeta.img....
Flash vbmeta file then patch boot file..
Good luck..
Click to expand...
Click to collapse
Thanks a lot it worked!!! :good:
I've been patching using Magisk Manager canary version on the phone. What version of Magisk Manager did you use It's really strange
nielsync said:
Thanks a lot it worked!!! :good:
I've been patching using Magisk Manager canary version on the phone. What version of Magisk Manager did you use It's really strange
Click to expand...
Click to collapse
I use this version of magisk manager and it always work
Shas45558 said:
I use this version of magisk manager and it always work
Click to expand...
Click to collapse
Thanks. I've been using Magisk Manager beta/canary and it seems it does not patch the boot image properly. You are the best.
Thanks for the post. It helped me to root my redmi note 9.
nielsync said:
Thanks. I've been using Magisk Manager beta/canary and it seems it does not patch the boot image properly. You are the best.
Click to expand...
Click to collapse
Welcome. Redmi 9 and redmi note 9 are are based on same chipset mt6768....
And so the process help you. I think it is the same to root any device running on Android 10.
And vbmeta.img which I provide upper post, is a universal vbmeta.img. you can use it to flash any Android device which has vbmeta partition because this vbmeta.img is a dummy file or you can call it as a blank file...
Shas45558 said:
Welcome. Redmi 9 and redmi note 9 are are based on same chipset mt6768....
And so the process help you. I think it is the same to root any device running on Android 10.
And vbmeta.img which I provide upper post, is a universal vbmeta.img. you can use it to flash any Android device which has vbmeta partition because this vbmeta.img is a dummy file or you can call it as a blank file...
Click to expand...
Click to collapse
My issues was patching using the canary version of Magisk Manager which isn't stable enough and was probably not patching the boot image properly as opposed to Magisk Manager 7.5.1 which is the stable version. Nice explanation on the vbmeta.img file.
VERY IMPORTANT:
Please make sure your ROM version matches the ROM version of those patched boot image and files. If they mismatch you might brick your phone and MediaTek phones are HELL to unbrick.
YOU HAVE BEEN WARNED.
For the post author:
Thanks for your effort
I understand you are trying to help and that you put a note at the end of your post. But please make it clear at the BEGINING, that this method is valid for this specific ROM Version "xx.x.xx.x.x"
I guess this still doesn't unlock the bootloader, and what about system updates?
Kiwironic said:
VERY IMPORTANT:
Please make sure your ROM version matches the ROM version of those patched boot image and files. If they mismatch you might brick your phone and MediaTek phones are HELL to unbrick.
YOU HAVE BEEN WARNED.
For the post author:
Thanks for your effort
I understand you are trying to help and that you put a note at the end of your post. But please make it clear at the BEGINING, that this method is valid for this specific ROM Version "xx.x.xx.x.x"
Click to expand...
Click to collapse
Ok i do ir on top and bottom of the post and thanks for your advice:good::good:
I have an issue. I cannot install any custom recovery on Redmi 9, no matter how much I try (Twrp or PBRP). Every time the phone reboots directly. There is anyone that can help me?
rizelgeorgel said:
I have an issue. I cannot install any custom recovery on Redmi 9, no matter how much I try (Twrp or PBRP). Every time the phone reboots directly. There is anyone that can help me?
Click to expand...
Click to collapse
Download pbrp from official website.then extract it and you will get a .img file.flash it via fastboot mood and the cmd is
fastboot flash recovery pbrp.img
*Change pbrb.img according to your file name.
One big question..did you unlock your bootloader and root your device?
Thank you very much! I succeeded according to your advice!
shas hows pbrp?
regarding flashing?
mhark.moby said:
shas hows pbrp?
regarding flashing?
Click to expand...
Click to collapse
Pbrp is in beta testing....so it has some bug and there's no use to install..
Buenas tardes tengo problemas al cargar el parche de magisk en redmi 9. Cuando cargo el boot.img parchado de magisk el tlfn queda en bootloop estoy en la version 11.0.8 global.
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process!
Downloads:
The Fastboot restoration file can be downloaded in here:
DN2103_11_A.07
DN2103_11_A.10 *deleted
DN2103_11_A.11 *deleted
please use ota files to upgrade
File folder on MEGA
mega.nz
include Flash Root & TWRPinstaller
tool for Windows (.bat)
Special Thanks: @HofaTheRipper @phhusson
Caution! Please check your version on your mobile phone before flashing. these files may only be used for V07!If you want to upgrade, use the ota files here.
Oneplus Nord 2 Oxygen 11.3 DN2103_11_A.10 EEA ROM
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process! Downloads: The Fastboot restoration file can be downloaded in here: https://mega.nz/folder/bMwxRCKb#E_ZX3TfA9hhbuODHMquxDA include...
forum.xda-developers.com
before flashing
Backup your nvcfg.img, nvdata.img, nvram.img, persist.img, proinfo.img, protect1.img and protect2.img with Partition Backup from Playstore
Partitions Backup & Restore - Apps on Google Play
Backup your important partitions to avoid any data or IMEI corruption
play.google.com
Interesting! Could I ask what ROM this is?
Eastw1ng said:
Interesting! Could I ask what ROM this is?
Click to expand...
Click to collapse
Hi, this is Oxygen OS .. I forget it in the Title Thanks
11.3.A07 EEA and11.3.A10 EEA
After doing this, will the updates come from oneplus as usual?
xirosiman said:
After doing this, will the updates come from oneplus as usual?
Click to expand...
Click to collapse
Yes, but i not test to Upgrade
sakarya1980 said:
Hi, this is Oxygen OS .. I forget it in the Title Thanks
11.0.3.A07 EEA
Click to expand...
Click to collapse
Hey thanks for the reply, my question was mostly if this is the stock rom for the oneplus nord 2, or is this a different rom made compatible?
Eastw1ng said:
Hey thanks for the reply, my question was mostly if this is the stock rom for the oneplus nord 2, or is this a different rom made compatible?
Click to expand...
Click to collapse
Stock, not custom
sakarya1980 said:
Yes, but i not test to Upgrade
Click to expand...
Click to collapse
I tested. You must flash without root, then can you upgrade @xirosiman
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process!
OTA files here (put this files to your OTG)
File folder on MEGA
mega.nz
Click to expand...
Click to collapse
Stock boot.img https://mega.nz/folder/fZx2nBaR#Q33lJstFRMQg6_0j7Z0TJw
Click to expand...
Click to collapse
Please use this commands
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta2.img
Fastboot flash boot nord2_stock_boot_A07.img
ok i managed to make it run.
when all is done, it can not boot.
i managed to flash the boot.img from the other thread in order to make it run.
xirosiman said:
ok i managed to make it run.
when all is done, it can not boot.
i managed to flash the boot.img from the other thread in order to make it run.
Click to expand...
Click to collapse
You must flash vbmeta2 then boot.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta2.img
Do you try v10? You can not flash from v7 to v10 and please check your driver
ok i have done it. Somehow the wifi toggle wasnt working but after flashing vbmeta and boot its ok.
i managed to go to A7 stock and now is updating to A10.
One thing i noticed, the combination of volume down and start button has changed only to fastboot.
And the only way to go to recovery is from command
also it can not recognise the sim cards
and the updade through ota is failed. it can not verify says
xirosiman said:
ok i have done it. Somehow the wifi toggle wasnt working but after flashing vbmeta and boot its ok.
i managed to go to A7 stock and now is updating to A10.
One thing i noticed, the combination of volume down and start button has changed only to fastboot.
And the only way to go to recovery is from command
also it can not recognise the sim cards
and the updade through ota is failed. it can not verify says
Click to expand...
Click to collapse
You can't update from 7 to 10. You must flash ota file with v9, then Upgrade to 10.
Wlan and Bluetooth works, after flash v7 again
Here ota files
https://mega.nz/folder/rQhhHQpA#nNHvPlmzBXwPjmaFpuDa2Q
Please put both file to your otg storage and flash it, with stock recovery. Every time after flash vbmeta2
You can start recovery with fastboot reboot recovery
Downgrading from 10 to 7 was not successful. Even if the rom works it can not recognise the sim cards.
Now i am flasing 10 to see if it works
during flashing its says "Invalid sparse file format at header magic" do this has something to do with drivers?
xirosiman said:
Downgrading from 10 to 7 was not successful. Even if the rom works it can not recognise the sim cards.
Now i am flasing 10 to see if it works
during flashing its says "Invalid sparse file format at header magic" do this has something to do with drivers?
Click to expand...
Click to collapse
dont abort this. Invalid sparse file format at header magic" is normal, but you must wait ...
sakarya1980 said:
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process!
Please use this commands
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta2.img
Fastboot flash boot nord2_stock_boot_A07.img
Click to expand...
Click to collapse
Did a full upgrade from stock 07 to 09 then 10, went perfectly.
Thanks Sakarya!
Eastw1ng said:
Did a full upgrade from stock 07 to 09 then 10, went perfectly.
Thanks Sakarya!
Click to expand...
Click to collapse
Hi, good ota flash 07 to 09?
Yeah OTA flash from 07 to 09, then a flash from 09 to 10 and followed up with the rooted boot image to make sure everything was as you described. Works flawlessly!
Is there any way to flash the ROM without fastboot? I bricked the phone and I'm unable to get to fastboot.
Update tonOxygen 11.3 DN2103_11_A.10 EEAinclude Flash Root & TWRPinstaller
tool for Windows (.bat)
[RECOVERY][UNOFFICIAL] TWRP 3.5.2_11-0 for OnePlus Nord 2 5G [denniz]
https://forum.xda-developers.com/t/...-2_11-0-for-oneplus-nord-2-5g-denniz.4335021/
Hi all and sorry for my bad english in first!!
i live in italy and i've buyed(but still not recieved) one oneplus 9r from china whit oxygenos rom on board..
When it comes i want to root & debloat it, but i've some queustion cause in last year i've used only device with custom rom!.
first of all i wan't to root the phone, but preserve the possibility to update the OS with ota. if i understand right it's possible with magisk, can please someone tell me the correct step to make?
after root i vant to uninstall not necessary app for my utilization (facebook/instagram/netflix, red cable and oneplus account, google app, gdrive, google photo and most of BigG apps cause i'm using only gmail/yt/maps/ an store!).
the question is.... if i uninstall this app it will be re installed in future ota?
Thanks in advice!
Step1 : unlock bootloader, this will wipe the storage, then setup the device once again then enable usb debugging in developer options.
You can use this
Tool to make (tool all in one) your life easier : https://sourceforge.net/projects/tool-all-in-one/files/TOOL_ALL_IN_ONE_1.0.6.1.zip/download
you should select 8t as 9r is not supported officially
at the moment.
Step2: update the phone to latest version , right now it's 11.2.5.5
Step 3: download the same version of the oxygen is ota wether from xda, OnePlus official site , oxygen updater ( make sure it is full version).
Step4: on pc now extract only the payload.bin file in the input of the payload extracter ,
Now use the payload extracter ,
Run .exe and get boot.img .
payload_dumper_tool_by_ius.zip
drive.google.com
(MAKE SURE THE PHONE OS VERSION AND BOOT IMG VERSION IS SAME)
Step 5: install magisk manager on phone, now patch the boot.img that you extracted earlier. Copy this patched boot.img in platforms tool folder(I hope that u have installed the platform tools and adb & fastboot ).
Step 6: open terminal there in platform tools , use the tool all in one to boot your phone in fast boot mode,then flash patched boot.img using.
Fastboot devices
Fastboot flash boot_a patched.img
Fastboot flash boot_b patched.img
Bingo got rooted.
Step 7( optional) : now properly restart the phone by opening magisk , then install universal safety net fix, debloat modules in magisk.
You can use lucky patcher to debloat unnecessary things (which don't exist as it is oxygen os)
Now in future if your phone gets ota make sure you disable all magisk modules then download the full version of ota from oxygen updater & update it locally & do not restart.
go to magisk ,
flash magisk to inactive slot.
restart now,
REnable the modules. (Tip don't enable the lucky patcher module this will put you in bootloop)
enjoy the ota .
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
lvints said:
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
Click to expand...
Click to collapse
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
Way better than twrp just follow the steps u won't lose anything
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
So how did it go?
Rajveer chauhan said:
So how did it go?
Click to expand...
Click to collapse
I've already downloaded the files, but I haven't tested them yet.
I'll leave it for the weekend, if there's a problem I can solve it with peace of mind.
Sir have you tried changing the font of your 9R?
I've been looking on the magisk forums or some app but I haven't had success.
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Rajveer chauhan said:
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Click to expand...
Click to collapse
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Same version
lvints said:
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Click to expand...
Click to collapse
.
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
I flashed the img file and it booted to OrangeFox but I cannot press anything as the screen does not react. What is the solution for it?
It's is compatible with oos 11
Not with oos 12, any custom roms
Rajveer chauhan said:
It's is compatible with oos 11
Not with oos 12, any custom roms
Click to expand...
Click to collapse
I was on OOS 11. The 11.2.8.8.LE28DA.
Flashed it, boot up but cannot press anything. How can I go back to the original boot?
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Rajveer chauhan said:
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Click to expand...
Click to collapse
Thanks I got back to the original boot, but now how can I root with Magisk?
@Rajveer chauhan
Hello sr
Have you updated your 9r for A12 ? If yes, how did you do it? Would it be possible to go from A11 (11.2.8.8) to A12 (C.33)?