Hi fellow developers.
So,my story is quite weird and expected indeed.
Being the noob I am at flashing custom roms and recoveries,I flashed orange fox recovery on my device,even flashed a custom rom and managed to use it for about 3/4 hours.
Then I thought that my device was ready, all my changes work,and it is a good idea to relock my bootloader.So,without flashing the stock recovery back,I relocked my bootloader.
After reboot,my device is stuck on "Red state" and keeps on rebooting after every 5 secs. I can't even boot to fastboot mode,nor can I completely shut down my device.
So any ideas what can I do? Do I need to go to the service center? If yes,what would they do and how much would they charge?
Thank you!.
Kaybee2611 said:
Hi fellow developers.
So,my story is quite weird and expected indeed.
Being the noob I am at flashing custom roms and recoveries,I flashed orange fox recovery on my device,even flashed a custom rom and managed to use it for about 3/4 hours.
Then I thought that my device was ready, all my changes work,and it is a good idea to relock my bootloader.So,without flashing the stock recovery back,I relocked my bootloader.
After reboot,my device is stuck on "Red state" and keeps on rebooting after every 5 secs. I can't even boot to fastboot mode,nor can I completely shut down my device.
So any ideas what can I do? Do I need to go to the service center? If yes,what would they do and how much would they charge?
Thank you!.
Click to expand...
Click to collapse
Not that only you should have the stock recovery to relock bootloader, you should need to return completely to stock to can relock it safely.
Follow this guide carefully https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ replace all the files needed when it comes to your specific model.
Kaybee2611 said:
Hi fellow developers.
So,my story is quite weird and expected indeed.
Being the noob I am at flashing custom roms and recoveries,I flashed orange fox recovery on my device,even flashed a custom rom and managed to use it for about 3/4 hours.
Then I thought that my device was ready, all my changes work,and it is a good idea to relock my bootloader.So,without flashing the stock recovery back,I relocked my bootloader.
After reboot,my device is stuck on "Red state" and keeps on rebooting after every 5 secs. I can't even boot to fastboot mode,nor can I completely shut down my device.
So any ideas what can I do? Do I need to go to the service center? If yes,what would they do and how much would they charge?
Thank you!.
Click to expand...
Click to collapse
For future reference, NEVER re-lock the bootloader when your phone isn't 100% stock. The guide SubwayChamp linked above should work.
SubwayChamp said:
Not that only you should have the stock recovery to relock bootloader, you should need to return completely to stock to can relock it safely.
Follow this guide carefully https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ replace all the files needed when it comes to your specific model.
Click to expand...
Click to collapse
Hey @SubwayChamp
I did try the method you recommended. But,my phone is not recognised as a mediatek device.They show all the connected devices as usb.
Kaybee2611 said:
Hey @SubwayChamp
I did try the method you recommended. But,my phone is not recognised as a mediatek device.They show all the connected devices as usb.
Click to expand...
Click to collapse
[GUIDE] REALME 7 RMX2155 GLOBAL BOOTLOADER UNLOCK
WELCOME, ALL. After a very tiring process of swapping between ROMs and changing regions, APKs, et cetera, we have finally been able to perfect the method for unlocking the bootloader of the RMX2155! This is a detailed guide aimed to give you an...
forum.xda-developers.com
Try following step one to eight inclusive. Should then recognize your device.
Kaybee2611 said:
Hey @SubwayChamp
I did try the method you recommended. But,my phone is not recognised as a mediatek device.They show all the connected devices as usb.
Click to expand...
Click to collapse
how much will service center charge for repairing it??
Hey for me same problem now in my narzo 30a.... can u fix that problem ? @Kaybee2611
daitama said:
how much will service center charge for repairing it??
Click to expand...
Click to collapse
I didn't bring it to the repair center, in my country no one knows about. IDK which the price could be, maybe 40 buckets.
Related
Hello Guys~i really need some help~please~I'm using Sony Ericsson X10~
I do the bootloader unlock sim~all fine...~downgrade...with flash tool~
After that~downgrade success lol~and i open the qsd8250_semc to unlock sim~
The system will just start if you press any key but after i do that~
i forgot to close my flashtool~damm~==~
and i close my qsd8250_semc.cmd 1st then i close flashtool~i think it crash already~
after that the phone automatic start up~i don care about it and i take out the battery and put in again~then start from the step qsd8250_semc.
i open the qsd8250_semc and all success killing...etc~
but when i need to upgrade back the karnel~i got a big problem~
the flash tool say "USB debugging"are off and wan to start up the phone and go to enable it~
but i cannot start my phone~just stack at the loading screen with the word~(Sony Ericsson)~i waiting about 1hours also cannot get in~i tried to wait it~and i try to do the upgrade karnel process again~
the flash tool is run about 80%~i think it success but it say again need to on the "USB debugging"and aborted~
Damm~now when i start up my phone~after the word (Sony Ericsson)come out~and then it will display a green background and got a big (!) symbol~
Someone can help me to fix this problem please~thx alot~Guys~
Some One Please Help~
waikhin520 said:
Some One Please Help~
Click to expand...
Click to collapse
Lol. Ok, what you've manage to do was successfully brick you phone. No worries, this is an easy fix.
1. Download a stock 2.3.3 SE ROM.
2. Put .ftf file into the firmware folder of the flashtool (make sure its the latest version flashtool.)
3. Follow the flashtool's instructions.
4. After successfully flashing the stock ROM, Keep the flashtool open. Unplug the device and boot the device. Enable debugging and unknown sources.
5.Plug in phone (phone should still be on), flashtool will recognize the device seconds after. Then root.
6. After successfully rooting the device, repeat unlocking methods.
PS: The wonderful thing about our devices (x10) is that you can never break your phone by flashing too many times or bricking the device. Never. The only absolute way to break your phone is to damage the USB port. So be gentle with that part of the phone.
Mr.Quipster said:
Lol. Ok, what you've manage to do was successfully brick you phone. No worries, this is an easy fix.
1. Download a stock 2.3.3 SE ROM.
2. Put .ftf file into the firmware folder of the flashtool (make sure its the latest version flashtool.)
3. Follow the flashtool's instructions.
4. After successfully flashing the stock ROM, Keep the flashtool open. Unplug the device and boot the device. Enable debugging and unknown sources.
5.Plug in phone (phone should still be on), flashtool will recognize the device seconds after. Then root.
6. After successfully rooting the device, repeat unlocking methods.
PS: The wonderful thing about our devices (x10) is that you can never break your phone by flashing too many times or bricking the device. Never. The only absolute way to break your phone is to damage the USB port. So be gentle with that part of the phone.
Click to expand...
Click to collapse
It's not true that you can't brick it. Once you have unlocked the bootloader there's a chance to brick it (One or two devs have done it before).
aR_ChRiS said:
It's not true that you can't brick it. Once you have unlocked the bootloader there's a chance to brick it (One or two devs have done it before).
Click to expand...
Click to collapse
If you're talking about "bricking" the device then of course there is always a chance of bricking. Whether it be on a locked or unlocked bootloader. I was talking about permanently breaking the device, meaning it is unable to fix or repair.
Mr.Quipster said:
If you're talking about "bricking" the device then of course there is always a chance of bricking. Whether it be on a locked or unlocked bootloader. I was talking about permanently breaking the device, meaning it is unable to fix or repair.
Click to expand...
Click to collapse
You misunderstand
Bricking means to permantly break it.
With a locked bootloader you can not do that because you can always do a software repair with SEUS/PCCompanion.
With an unlocked bootloader you can do that and the only potential way of savng it is with JTAG.
But here is the point, You cannot brick your phone with a locked bootloader!!!
It may lock on you, you may not be able to boot, but thats does not mean its bricked
gregbradley said:
You misunderstand
Bricking means to permantly break it.
With a locked bootloader you can not do that because you can always do a software repair with SEUS/PCCompanion.
With an unlocked bootloader you can do that and the only potential way of savng it is with JTAG.
But here is the point, You cannot brick your phone with a locked bootloader!!!
It may lock on you, you may not be able to boot, but thats does not mean its bricked
Click to expand...
Click to collapse
Thank you for clearing that up. Now I know...
Guys Thx alot~can you give me a link of the 2.3.3 SE ROM~
?
waikhin520 said:
Guys Thx alot~can you give me a link of the 2.3.3 SE ROM~
?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=936733
can i ask~download which one~><~me damm foolish~
waikhin520 said:
Guys Thx alot~can you give me a link of the 2.3.3 SE ROM~
?
Click to expand...
Click to collapse
Use PCCompanion to install stock 2.3.3 rom...
Just click on update and/or repair
I noe already~thx~downloading~hope it work~^^~alive~
Thx a lot~Man~^^~Love u guys~
Hello,
I just jumped on a good deal for Xperia Z5 (E5823) with software issue. Device boots up to the Xperia logo screen and hags there. I am preparing myself for flashing but hoping a simple hard reset might solve the problem. What should my steps be? I already downloaded Flashtool and did some reading on the forum to get myself familiar with the process. Looks like I will need to download FTF file (I am in US, prefer to have unbranded with minimal carrier bloat) and can use your advice on which version/file to start with. Ideally I would want to root as well, but for now more concerned about restoring back to stock. I did read that Lollipop has a better performance, but open to suggestions for whatever is easier/stable. Any guidance/advice is appreciated (with links to tools or downloads if avail). Is there a way to tell what version # along with region/customization I have installed now?! Should I try the Sony Companion software?
For the record, I have successfully flashed custom ROMS on various Samsung/LG devices, as well as Nexus 4/5. Therefore, feel pretty confident this should not be impossible or any harder. Thanks A LOT.
An update after spending few hours yesterday. PC Companion doesn't recognize the phone when attempting to repair (Vol down + insert USB). It did install few drivers when connected to PC, and it looks like the phone does go into flashmode (as indicated by LED staying green). Then tried the Flashtool, created FTF file (based on tutorial at XperiaBlog) and again the same thing, can't get the phone to be recognized in flashmode. It does respond in fastboot mode and able to get some identifying information. I couldn't find any information on how to flash system, kernel, etc through fastboot (was hoping to use the Flashtool FastBoot mode option, but picking corresponding SIN files resulted is fail errors). I am afraid that flashmode might not work for me as the phone might not have USB debugging enabled (not sure what was done to it and who had it prior).
Are the other alternatives/methods I should try? I wish there was a way to send flash commands from ADB command prompt (like with Nexus phones) and from fastboot mode. Any ideas? Really love the phone, though and want to get it repaired to replace my huge LG! Thanks everyone.
coolmen777 said:
An update after spending few hours yesterday. PC Companion doesn't recognize the phone when attempting to repair (Vol down + insert USB). It did install few drivers when connected to PC, and it looks like the phone does go into flashmode (as indicated by LED staying green). Then tried the Flashtool, created FTF file (based on tutorial at XperiaBlog) and again the same thing, can't get the phone to be recognized in flashmode. It does respond in fastboot mode and able to get some identifying information. I couldn't find any information on how to flash system, kernel, etc through fastboot (was hoping to use the Flashtool FastBoot mode option, but picking corresponding SIN files resulted is fail errors). I am afraid that flashmode might not work for me as the phone might not have USB debugging enabled (not sure what was done to it and who had it prior).
Are the other alternatives/methods I should try? I wish there was a way to send flash commands from ADB command prompt (like with Nexus phones) and from fastboot mode. Any ideas? Really love the phone, though and want to get it repaired to replace my huge LG! Thanks everyone.
Click to expand...
Click to collapse
Why couldn't you use adb? I use it to flash the recovery every once in a while, I hate flash tool. It took me a good 4 different PCs before I found one it would work on
civicsr2cool said:
Why couldn't you use adb? I use it to flash the recovery every once in a while, I hate flash tool. It took me a good 4 different PCs before I found one it would work on
Click to expand...
Click to collapse
I gladly would, except that I am not very comfortable using it due to lack of experience and available zips for my Z5 compact. Can you point me to that info and how to make zips to flash and what to start with? I am willing to try it.
Also, how can I check if my boot loader is unlocked? Can't seemed to find a command to use. Thanks again.
Any pointers for zips or how to flash a rom through fastboot? Thanks.
coolmen777 said:
Any pointers for zips or how to flash a rom through fastboot? Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2277112
We have a couple aosp Roms available to flash, I'd try cm13. I don't know if you've tried to unlock your bootloader yet or not but you should try that. You could also try flashing zombie kernal and see if that'd boot up.
civicsr2cool said:
Why couldn't you use adb? I use it to flash the recovery every once in a while, I hate flash tool. It took me a good 4 different PCs before I found one it would work on
Click to expand...
Click to collapse
civicsr2cool said:
http://forum.xda-developers.com/showthread.php?t=2277112
We have a couple aosp Roms available to flash, I'd try cm13. I don't know if you've tried to unlock your bootloader yet or not but you should try that. You could also try flashing zombie kernal and see if that'd boot up.
Click to expand...
Click to collapse
Thanks for the reply and guidance. I would prefer to stick with Stock Xperia software and launcher. From my experience, CM tends to be buggy and I need full stable functionality with max battery (hoping to give Stamina a test). I am not sure if the bootloader is unlocked and don't want to mess with it unless I absolutely have to (does unlocking BL still messes with DRM keys for camera processing?) Wish I could see if it is unlocked somehow, maybe someone tried to flash/root it and messed up the bootloader somehow.
I will look at zombie kernel (does it need unlocked bootloader or recovery to flash, will it work with stock ROM?) Thanks again for your help.
coolmen777 said:
Thanks for the reply and guidance. I would prefer to stick with Stock Xperia software and launcher. From my experience, CM tends to be buggy and I need full stable functionality with max battery (hoping to give Stamina a test). I am not sure if the bootloader is unlocked and don't want to mess with it unless I absolutely have to (does unlocking BL still messes with DRM keys for camera processing?) Wish I could see if it is unlocked somehow, maybe someone tried to flash/root it and messed up the bootloader somehow.
I will look at zombie kernel (does it need unlocked bootloader or recovery to flash, will it work with stock ROM?) Thanks again for your help.
Click to expand...
Click to collapse
I'm only trying to suggest things that could get the phone working again not permanent solutions lol I don't run cm13 yet as it's definitely not refined. Flashing a stock ftf should be able to bring you to complete original specs without unlocking bootloader or anything.
civicsr2cool said:
I'm only trying to suggest things that could get the phone working again not permanent solutions lol I don't run cm13 yet as it's definitely not refined. Flashing a stock ftf should be able to bring you to complete original specs without unlocking bootloader or anything.
Click to expand...
Click to collapse
Lol, I understand now. It looks like the bootloader might still be locked as I am unable to flash zombie kernel (command: "fastboot flash boot boot.img" results in sending OK, but Failed: remote command not allowed). Looks like I am stuck to trying to unlock a bootloader to keep trying to revive the phone. Just bothers me that I can't get into Flashmode (even after installing drivers that come with Flashtool). Could this be because the phone might not have USB debugging enabled? Is there a way to try to flash the stock through fastboot (as zip) instead of ftf?
My big concern is loosing TA partition and associated DRM keys (any way to back it up from fastboot or toolkit?). Or is that not a factor with the hack available now? Sorry for all these questions, just getting more and more frustrated with this.
coolmen777 said:
Lol, I understand now. It looks like the bootloader might still be locked as I am unable to flash zombie kernel (command: "fastboot flash boot boot.img" results in sending OK, but Failed: remote command not allowed). Looks like I am stuck to trying to unlock a bootloader to keep trying to revive the phone. Just bothers me that I can't get into Flashmode (even after installing drivers that come with Flashtool). Could this be because the phone might not have USB debugging enabled? Is there a way to try to flash the stock through fastboot (as zip) instead of ftf?
My big concern is loosing TA partition and associated DRM keys (any way to back it up from fastboot or toolkit?). Or is that not a factor with the hack available now? Sorry for all these questions, just getting more and more frustrated with this.
Click to expand...
Click to collapse
Come to think of it without getting into the phone to enable unlocking the bootloader I don't think you would even be able to do that. Even if the drivers weren't installed the phone should go into flash mode. I had a hard time with my first attempt with flash tool at getting into flash mode. If you hold power and volume up you should be able to power down the phone completely then hold volume up while plugging in. The problem I had was my PC has a few different USB ports and I was using one that was meant for charging and it wouldn't go into flash mode, tried a different port and it went well after that.
Failed: remote command not allowed ???
This error is because you have not enabled OEM Unlocking from the Developer Option.
If you have enabled it but still receiving the error then you have not unlocked bootloader properly.
There is no need to unlock bootloader for flashing official sony firmwares. It is pretty simple. If you are facing any problems then please feel free to message me.
my email : [email protected]
#coolmen777
Looks like this phone got the dreaded sleep of death bug (won't turn on at all, no matter which combination of buttons I press). Had it on the charger for last 3 days (no led indicators at all and no vibrations), so I got a brick now. Any ideas? This phone should still be under warranty (manufactored week 9 of 2016), but Sony USA refuses to service International phones in their facility. Learned that based on IMEI, this is a Hong Kong version and they want an invoice from authorized dealer for warranty work. Are there are other countries that honor warranty without checking invoice (go by date of manufactoring?) I had Moto and LG repaired before just based on age of phone, no invoice needed. This is my last resort option (to attempt sending in for service).
coolmen777 said:
Looks like this phone got the dreaded sleep of death bug (won't turn on at all, no matter which combination of buttons I press). Had it on the charger for last 3 days (no led indicators at all and no vibrations), so I got a brick now. Any ideas? This phone should still be under warranty (manufactored week 9 of 2016), but Sony USA refuses to service International phones in their facility. Learned that based on IMEI, this is a Hong Kong version and they want an invoice from authorized dealer for warranty work. Are there are other countries that honor warranty without checking invoice (go by date of manufactoring?) I had Moto and LG repaired before just based on age of phone, no invoice needed. This is my last resort option (to attempt sending in for service).
Click to expand...
Click to collapse
search on here for a thread about flashing the wrong ftf onto the phone, I think op used a tablet ftf and had teh same results and had to send to sony
edit:
http://forum.xda-developers.com/z5-compact/help/flashed-wrong-mm-rom-phone-dead-help-t3330929
civicsr2cool said:
search on here for a thread about flashing the wrong ftf onto the phone, I think op used a tablet ftf and had teh same results and had to send to sony
edit:
http://forum.xda-developers.com/z5-compact/help/flashed-wrong-mm-rom-phone-dead-help-t3330929
Click to expand...
Click to collapse
Thanks, not very encouraging given the fact that Sony USA supposedly doesn't currently have a service center to repair international phones (closed their TX center). Are there other countries (Canada or UK) which have less stringent policies of needing invoice (for proof of purchase) and can simply go off of manufacture date from the IMEI or device info? Thanks again.
So my phone just got stuck while normal usage. Tried restarting and the phone began boot looping.
Did plenty of research and finally decided to flash. Tried to flash using mi flash in fastboot mode but failed then google search made me realise my bootloader was locked. Did more research and decided to flash using test point EDL method.
Things went pretty well and the flash (miui v8) and the process became successful and when I powered my device the phone went back to boot loop again.
Tried flashing again and the result was the same.
It would be really helpful if somebody could actually help clear the issue. Did pretty much everything I could do as a newbie to flashing.
thank you!
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
thisbearisdrunk said:
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
Click to expand...
Click to collapse
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
M i L i N said:
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
Click to expand...
Click to collapse
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
thisbearisdrunk said:
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
Click to expand...
Click to collapse
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
M i L i N said:
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
Click to expand...
Click to collapse
If it recognises ur phone like that then flashing does nothing to ur phone so the only way is to go into edl mode and then flashing
https://forum.xda-developers.com/re...ool-redmi-note-4-edl-mode-o-removing-t3684024
Use this tool to go into edl mode and then flash
This thread can help ,because i bricked my phone once without unlocking the bootloader and the miflashtool recognised my phone like how it recognised urs and this thread saved my phone
Good luck
Hi, my BQ Aquaris U2 Lite won't boot, I unlocked its bootloader and when I restart it, it is stuck at the next screen:
Your device software can't be checked for corruption. Please lock the bootloader.
If no key pressed:
Your device will boot in 5 seconds
But nothing happens, it stays there.
Help please, thank you.
@help38
The first time that an Android device boots up, the bootloader ( the Android counterpart to Windows BIOS/UEFI ) starts running. It is basically a software program that contains a list of OS instructions to ensure the smooth functioning of the device. Once this bootloader is unlocked, the user can manually change what ROM image was set as default by the OEM, and customize the device according to its liking.
Simply unlocking the bootloader does NOTHING than the Android OS now is waiting for instruction what ROM to load and run
jwoegerbauer said:
@help38
The first time that an Android device boots up, the bootloader ( the Android counterpart to Windows BIOS/UEFI ) starts running. It is basically a software program that contains a list of OS instructions to ensure the smooth functioning of the device. Once this bootloader is unlocked, the user can manually change what ROM image was set as default by the OEM, and customize the device according to its liking.
Simply unlocking the bootloader does NOTHING than the Android OS now is waiting for instruction what ROM to load and run
Click to expand...
Click to collapse
Hi, thank you, but my phone is stuck at that screen and nothing happens, I can't boot Android, do you know what is happening?
I unlocked the bootloader with BQ Firmware Flash Tool, because the phone only loaded Android Recovery, and didn't boot up the OS.
I only want to recover my files and photos
Thank you again.
@help38
I think you've to flash a Custom ROM. Note that's only possible if USB debugging got enabled on phone before unlocking the bootloader took place.
jwoegerbauer said:
@help38
I think you've to flash a Custom ROM. Note that's only possible if USB debugging got enabled on phone before unlocking the bootloader took place.
Click to expand...
Click to collapse
How can I do that?
I didn't have USB debugging enabled, aren't there any other ways to recover my files?
Thank you.
help38 said:
How can I do that?
I didn't have USB debugging enabled, aren't there any other ways to recover my files?
Thank you.
Click to expand...
Click to collapse
No other methods, AFAIK
Even doing a Factory Reset doesn't relock the bootloader.
BTW: The 1st thing of all things an Android user should do is to enable USB debugging on his phone: that makes it all easier.
jwoegerbauer said:
No other methods, AFAIK
Even doing a Factory Reset doesn't relock the bootloader.
BTW: The 1st thing of all things an Android user should do is to enable USB debugging on his phone: that makes it all easier.
Click to expand...
Click to collapse
, thank you, but, do you know if there is someone who could recover the files by paying him?
I really want those files
help38 said:
, thank you, but, do you know if there is someone who could recover the files by paying him?
I really want those files
Click to expand...
Click to collapse
Repair service?
jwoegerbauer said:
Repair service?
Click to expand...
Click to collapse
I don't think they could, but I will try, thanks.
jwoegerbauer said:
Repair service?
Click to expand...
Click to collapse
They told me that they can't...
Do you know any other place to recover my photos?
Thank you again.
At least is there a way to unbrick the phone?
Thanks.
Help please
When i flashed the Evolution X Rom to Stock rom It Got Failed And My Device Is Not Turning ON.
Whenever I Tried To Install stock Rom using mi flash tool It Is Saying "Cannot Recieve Hello Packet" & write time out,maybe device was disconnected Please Help ME To Fix
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
papsr6 said:
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
Click to expand...
Click to collapse
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
wetito said:
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
Click to expand...
Click to collapse
I Had Tried EDL flashing from Unlock Tool Flashing Done Perfectly But Formatting Failed..Is it a partition error ?.. The Display is not turning on.. No Signal Only The Signal is Entering EDL mode
wetito said:
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
Click to expand...
Click to collapse
papsr6 said:
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
Click to expand...
Click to collapse
My Phone Is Now Like This :
hishamhsm said:
I Had Tried EDL flashing from Unlock Tool Flashing Done Perfectly But Formatting Failed..Is it a partition error ?.. The Display is not turning on.. No Signal Only The Signal is Entering EDL mode
Click to expand...
Click to collapse
What you wrote is not good... I don't know unloock tool. But before use this applications is necessary read carefully the instructions. It seems you didn't have do this. Good luck. Ps: if your phone boot into fastboot reflash stock via miflash... If you don't have made a big damage it will work. Very import is select the correct slot before flash... In my case i always select slot a to make a clean and safe installation
wetito said:
What you wrote is not good... I don't know unloock tool. But before use this applications is necessary read carefully the instructions. It seems you didn't have do this. Good luck. Ps: if your phone boot into fastboot reflash stock via miflash... If you don't have made a big damage it will work. Very import is select the correct slot before flash... In my case i always select slot a to make a clean and safe installation
Click to expand...
Click to collapse
is mi authorized account needed
hishamhsm said:
is mi authorized account needed
Click to expand...
Click to collapse
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
wetito said:
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
Click to expand...
Click to collapse
no fastboot , no charging
wetito said:
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
Click to expand...
Click to collapse
will you help me to flash my phone via teamviewer
Sorry if you have damage bootloader (so fastboot don't work), the only way is edl. But i don't know how to solve edl flash fail. You had ask to other user, or search with Google. Or i'm afraid for you... Buy new phone. For the future if you want modding... Do it carefully
wetito said:
Sorry if you have damage bootloader (so fastboot don't work), the only way is edl. But i don't know how to solve edl flash fail. You had ask to other user, or search with Google. Or i'm afraid for you... Buy new phone. For the future if you want modding... Do it carefully
Click to expand...
Click to collapse
Thanks Bro Thanks For Your Support,.... Love From Kerala , India
Good luck
Same thing happened to me then i went mi authorised service centre and they charged 179rs and now my phone is working fine
azeem_saifi0411 said:
Same thing happened to me then i went mi authorised service centre and they charged 179rs and now my phone is working fine
Click to expand...
Click to collapse
is that phone under warranty while it was bricked
hishamhsm said:
is that phone under warranty while it was bricked
Click to expand...
Click to collapse
Sorry no. You have the bootloader unlocked... If your restore via edl will fail, in my opinion the best choice is buy a new phone. I don't know in your country. considerating that motheborard is not damaged... But phone must be open... The minum cost of this repair i think could be 100 € (convert in your currency). On YouTube there are a lot of tutorial how to do by yourself... But i'm not shure you have all skills...
wetito said:
Sorry no. You have the bootloader unlocked... If your restore via edl will fail, in my opinion the best choice is buy a new phone. I don't know in your country. considerating that motheborard is not damaged... But phone must be open... The minum cost of this repair i think could be 100 € (convert in your currency). On YouTube there are a lot of tutorial how to do by yourself... But i'm not shure you have all skills...
Click to expand...
Click to collapse
I Have Given It to A repair shop. They told me that that is emmc/UFS chip issue. So they will reprogramme the chip fix it and give the phone to me... They Told that it should fix..
Anyway I'm from India
hishamhsm said:
I Have Given It to A repair shop. They told me that that is emmc/UFS chip issue. So they will reprogramme the chip fix it and give the phone to me... They Told that it should fix..
Anyway I'm from India
Click to expand...
Click to collapse
I suppose that was the problem. I hope the repair shop in india are cheapest than in italy for the future... Make Modding with care
wetito said:
I suppose that was the problem. I hope the repair shop in india are cheapest than in italy for the future... Make Modding with care
Click to expand...
Click to collapse
Repairing cost around 10dollars . In India repairing cost is low but the price of mobile phones and spare parts are too high due to tax.
Thank you so much for your help and support bro. Love From India❤❤