{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP version: 3.5.2_11
For device: gta4lwifi
Device Tree: https://github.com/juic3b0x/twrp_android_device_samsung_gta4lwifi
Maintainer/Authors build: ragarcia87
Installation Instructions
If TWRP Already Installed
Download recovery.img from below
Copy recovery.img to device
Install > Install Image > recovery.img to Recovery
Reboot > Recovery
Enjoy
From PC
Download Odin Flashable Tar from bellow
Put tablet into Odin Download Mode
Flash Blank vbmeta via Userdata
Flash Odin Flashable Tar via AP
Enjoy
Working
ADB
MTP
Everything, except decryption of internal data (havent tested)
Bugs
(My tablet is already decrypted so haven't tested this, please advise)
OS-encrypted storage (Internal Data) not able to be decrypted in TWRP.
Downloads
recovery.img
https://mega.nz/file/bkcimDCK#tkv6ATvxx_gEUJJ4OD2WQ1WsRPTINRZCc2hTFPg62aY
Blank vbmeta
https://mega.nz/file/74dAUBSQ#w_XN49p8TRppiOVEvI_eGXkzf6jgZWXarN4Qi6BFr-4
Odin Flashable Tar
https://mega.nz/file/C0NgmD6S#lWD70RUXsXs_sv-0E5BOHPoitQc8keyorarW0xtXV-4
Thanx a lot bro. was looking for it. working fine. is there any custom or modified samsung rom without bloat sothat we can use this recovery for that.
Glad it's working well for you. And to be honest, I've tried a few GSI roms and they work well, like crDroid GSI and CAOS GSI... I've been trying to cook up my own port of a few ROMs also to no avail yet but soon...
ragarcia87 said:
Glad it's working well for you. And to be honest, I've tried a few GSI roms and they work well, like crDroid GSI and CAOS GSI... I've been trying to cook up my own port of a few ROMs also to no avail yet but soon...
Click to expand...
Click to collapse
How do I install the GSI ROMs because I only get Boot Recovery dtbo vbmeta_samsung VBMeta and Super (system vendor odm product)
EdwardTCM said:
How do I install the GSI ROMs because I only get Boot Recovery dtbo vbmeta_samsung VBMeta and Super (system vendor odm product)
Click to expand...
Click to collapse
You have to use a patch called DynaPatch v1.5. It patches TWRP to be able to install individual images to the super dynamic partition... I don't know if I can post a link but if you Google DynaPatch v1.5 you'll be able to find it, just flash via TWRP and then reboot to Recovery and it will show system, vendor, product etc in the install
ragarcia87 said:
You have to use a patch called DynaPatch v1.5. It patches TWRP to be able to install individual images to the super dynamic partition...
Click to expand...
Click to collapse
Oh alright thanks
ragarcia87 said:
You have to use a patch called DynaPatch v1.5. It patches TWRP to be able to install individual images to the super dynamic partition... I don't know if I can post a link but if you Google DynaPatch v1.5 you'll be able to find it, just flash via TWRP and then reboot to Recovery and it will show system, vendor, product etc in the install
Click to expand...
Click to collapse
I got the file but nothing happened
Edit: Never mind I fixed it
Enter TWRP recovery
Select Install – select DynaPatch-v1.5.zip, Swipe to confirm Flash
Select Reboot – Recovery or Turn Power off
One time only to flash this patch except you reflash the TWRP recovery
The images attached are to show that it works.. I show a before the patch is installed and then after its installed... make sure you follow the directions above.
Aight, after i unlocked the bootloader, everytime i try to flash the vbmeta or even the twrp, it fails. any idea why?
"Only official released binaries are allowed to be flashed(vbmeta)"
Liloabouu said:
Aight, after i unlocked the bootloader, everytime i try to flash the vbmeta or even the twrp, it fails. any idea why?
"Only official released binaries are allowed to be flashed(vbmeta)"
Click to expand...
Click to collapse
After unlocking, did you re-enable Dev mode and check OEM?
Could you please refresh your device tree on GitHub with the changes you made for Android 11?
Magendanz said:
Could you please refresh your device tree on GitHub with the changes you made for Android 11?
Click to expand...
Click to collapse
I can certainly try, lol... Been super busy lately, 7days a week, two jobs no time off till after the new year lol... I'll keep ya posted
I'm having a problem with stock recovery overwriting TWRP. I have the latest stock, BUJ1, installed. I flash vbmeta and recovery with Odin and boot into TWRP. Format data and reboot recovery. Everything works fine. Reboot to system and go through the setup, make sure developer mode still enabled. Again, everything appears to work. Download the DynaPatch and copy it to the T500 SD card. Turn off the tablet and attempt to boot TWRP. It's gone. Back to stock recovery. What am I doing wrong????
read post below... sorry ... tried to edit and it double posted...
lewmur said:
I'm having a problem with stock recovery overwriting TWRP. I have the latest stock, BUJ1, installed. I flash vbmeta and recovery with Odin and boot into TWRP. Format data and reboot recovery. Everything works fine. Reboot to system and go through the setup, make sure developer mode still enabled. Again, everything appears to work. Download the DynaPatch and copy it to the T500 SD card. Turn off the tablet and attempt to boot TWRP. It's gone. Back to stock recovery. What am I doing wrong????
Click to expand...
Click to collapse
Thats my bad, youll want to use the multidisabler to fix that.. I have added it to the twrp.. once twrp is installed go to Advanced > Terminal and then type multidisabler then press enter. This will disable the stock recovery restoration.
What if I don't have TWRP installed yet but the tablet is rooted with Magisk? Is it okay to flash TWRP from within a running system?
ragarcia87 said:
Thats my bad, youll want to use the multidisabler to fix that.. I have added it to the twrp.. once twrp is installed go to Advanced > Terminal and then type multidisabler then press enter. This will disable the stock recovery restoration.
Click to expand...
Click to collapse
Thanks. That worked but I flashed DynaPatch and then lineage-19.0-20211216-UNOFFICIAL-treble_a64_bvS-vndklite.img in super and it bootloops. Any ideas? Of course this was after format of data and factory reset wipe.
lewmur said:
Thanks. That worked but I flashed DynaPatch and then lineage-19.0-20211216-UNOFFICIAL-treble_a64_bvS-vndklite.img in super and it bootloops. Any ideas?
Click to expand...
Click to collapse
You'll have to reflash stock super or extract the stock super img and flash vendor, product, odm, then the lineage to system
Also @lewmur will need the lineage-19.0-20211216-UNOFFICIAL-treble_arm64_bvS-vndklite.img variant. Not a64
paziusss said:
Also @lewmur will need the lineage-19.0-20211216-UNOFFICIAL-treble_arm64_bvS-vndklite.img variant. Not a64
Click to expand...
Click to collapse
paziusss said:
Also @lewmur will need the lineage-19.0-20211216-UNOFFICIAL-treble_arm64_bvS-vndklite.img variant. Not a64
Click to expand...
Click to collapse
Thanks. Got LOS 19 to boot. Do you know what gapps to use with it?
Related
OrangeFox Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* bruh moment
*/
OrangeFox is FREE SOFTWARE (cool)
Downloads:
TWRP TAR archive(For DL Mode): https://drive.google.com/file/d/1XzbUxpkUwL-eyl-rgDZqsuzfiA8PgeOt/view?usp=sharing
Flashable Zip (For TWRP/Old Ver): https://drive.google.com/open?id=1AyK46TWsaLHcOztJP9fSrwdi7wf7FcKV
dm-verity and force encrypt disable: https://zackptg5.com/android.php#disverfe
Rootfix(PIE): https://drive.google.com/file/d/1bgQcaiI-npszWBMruuXT0Hh3i_kzezZx
Rootfix(Q): https://drive.google.com/file/d/1zX2P6ChkjQbdWzyZUvomvp9wt2tkwzq0/view?usp=sharing
Documentation and Frequently Asked Questions: https://wiki.orangefox.tech/en/guides
Installation:
For users on stock:
NOTE: YOU WILL LOOSE ALL YOUR DATA!!!!!!
0. Unlock your bootloader
1. Boot to DL Mode and flash the twrp tar archive through your preferred version of odin (in bl tab)
2. DO NOT LET THE DEVICE BOOT. POWER IT OFF
3. Boot into recovery (Pow + Vol Up + USB plugged)
4. Go To Wipe -> Format Data
5. Flash orangefox recovery zip and reboot recovery
6. Flash Disable_Dm-Verity_ForceEncrypt_*.zip
7. Flash Rootfix.zip (mandatory on pie, q)
Boot the device and set it up again
8. Flash Magisk (optional)
DO NOT SETUP ANY FORM OF SCREEN LOCK ON STOCK ROM
For users who already have TWRP:
Just flash the flashable zip
Bugs
Encryption
You tell me :silly:
FEATURES:
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* Flashlight
* Password, torch, led
* Support for Miui and Custom ROMs
* Superb new UI and themes
* OrangeFox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more!
Screenshots
https://files.orangefox.tech/Screenshots/R10/
Sources:
DT: https://github.com/rupansh/twrp_device_samsung_gta2xl/tree/android-9.0
Kernel: https://github.com/rupansh/android_kernel_samsung_msm8953 (Rootfix HEAD = d74120555f651b0189e166d96e54605cbca347b4)
Rootfix Q: https://github.com/rupansh/android_kernel_samsung_gta2xl/tree/android-10
XDA:DevDB Information
OrangeFox Recovery Project, Tool/Utility for the Samsung Galaxy Tab A series
Contributors
rupanshji
Source Code: https://gitlab.com/OrangeFox
Version Information
Status: Stable
Stable Release Date: 2020-02-26
Created 2020-02-25
Last Updated 2020-12-28
Reserved
Telegram group for testing and general development discussion(T590/T595/T597): https://t.me/smt595
This guide and recovery will work with Samsung Galaxy Tab A (2018) SM-T595N?
kimo9hero said:
This guide and recovery will work with Samsung Galaxy Tab A (2018) SM-T595N?
Click to expand...
Click to collapse
I haven't tested personally. I cant find any info about T595N when I do a google search. what firmware are you on
not working on T597P,when i try to flash it i get size error in TWRP, then tried to flash just the img with tar tool and odin and it hangs. The original TWRP works though.
edit: Used a different version of twrp from another thread and was able to successfully flash.
Good Job, Good Job! Orange fox will be really well used on a custom lineage ROM. Again, Good Job!
koobie777 said:
not working on T597P,when i try to flash it i get size error in TWRP, then tried to flash just the img with tar tool and odin and it hangs. The original TWRP works though.
edit: Used a different version of twrp from another thread and was able to successfully flash.
Click to expand...
Click to collapse
Which version of twrp you used? I have the same size error message.
edit: ok, i have found
https://drive.google.com/drive/folders/1yeSLA6lgyKRVQhec5nbyThN-bVED_B8n
dm.homelinux.com said:
Which version of twrp you used? I have the same size error message.
edit: ok, i have found
https://drive.google.com/drive/folders/1yeSLA6lgyKRVQhec5nbyThN-bVED_B8n
Click to expand...
Click to collapse
that's the one I uploaded and was gonna link to you haha nice
Samsung Galaxy Tab A 2017 SM T385
OrangeFox Recovery Project & Viper OS for "Samsung tab a 2017 sm t385",anybody who can help on this topic.....................Please help me...................
Glad to see some development of SM-T595. Im looking forward to try things soon.
From "For users on stock" -
8. Flash Magisk (optional)
Click to expand...
Click to collapse
Using which method?
Also, how does this conflict/overlap/interact with [root-samsung-galaxy-tab-10-5-2018]?
Is this recovery treble enabled?
for T590 is now Android Q available. Anyone successful tried to use TWRP or Orangefox with it? T590XXU3CTH1_T590OXM3CTH1_DBT
I tried:
Erase all/Flash Stock/Flash TWRP from this Post, wasn´t able to boot to TWRP
Erase all/Flash Stock/Flash TWRP 3.3.1, boot to TWRP. Flash Fox. Run into recovery loop
Updated bugged twrp link
Fixed stock instructions
New update + Q rootfix coming soon
Marpo12 said:
for T590 is now Android Q available. Anyone successful tried to use TWRP or Orangefox with it? T590XXU3CTH1_T590OXM3CTH1_DBT
I tried:
Erase all/Flash Stock/Flash TWRP from this Post, wasn´t able to boot to TWRP
Erase all/Flash Stock/Flash TWRP 3.3.1, boot to TWRP. Flash Fox. Run into recovery loop
Click to expand...
Click to collapse
looking forward to Orangefox release . Alternativ solution for time inbetween to get root acccess on Android Q/10. Tested with T590XXU3CTH1_T590OXM3CTH1_DBT follow instructions on
https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
hello,
i tried this on T590 and didn't manage to install it.
bootloader unlock, of course.
1st try : Flash Stock, Flash TWRP from this Post => reboot in download mode at each boot
2nd try :Flash Stock, Flash TWRP 3.3.1, boot to TWRP. Flash Fox from this post. => reboot in download mode at each boot
all on android 9 T590XXU3BTE2_T590OXM3BTE2_AUT
before, i was on android 10 T590XXU3CTH1_T590OXM3CTH1_AUT_10
did someone manage to install orange fox on T590 ?
Lebannen74 said:
hello,
i tried this on T590 and didn't manage to install it.
bootloader unlock, of course.
1st try : Flash Stock, Flash TWRP from this Post => reboot in download mode at each boot
2nd try :Flash Stock, Flash TWRP 3.3.1, boot to TWRP. Flash Fox from this post. => reboot in download mode at each boot
all on android 9 T590XXU3BTE2_T590OXM3BTE2_AUT
before, i was on android 10 T590XXU3CTH1_T590OXM3CTH1_AUT_10
did someone manage to install orange fox on T590 ?
Click to expand...
Click to collapse
Hi, T595 recovery images are not compatible with T590 because of different kernel.
rupanshji said:
Hi, T595 recovery images are not compatible with T590 because of different kernel.
Click to expand...
Click to collapse
thanks for your reply.
ok but sad. I'm stuck with samsung official rom as there is almost nothing for the T590
added rootfix for android q
Helo, im searching for any twrp for Sm T597V thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.4.0
PitchBlack version: 3.0.0
For device: Poco M2 Pro (gram)
Maintainer/Authors build: kenny3fcb
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Kernel: https://github.com/ChaitanayaMittal/android_kernel_xiaomi_sm6250.git
PitchBlack Team: @rezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Fully native android like UI
Supports Treble and non-Treble ROMs
Up-to-date kernel, built from sources
Full dark theme with changeable accents
Reorganized menus
MIUI OTA support
Disable DM Verity
Use AromaFM as default file manager
Various tools are include
Universal flash-able file for all variant of a device
Many bug fixes & optimization & much more
Click to expand...
Click to collapse
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
Code:
v3.0.0
- Fully Redesigned UI
- Added new Keychecks While Flashing PBRP or recovery.img or Ramdisk
- Fully Redesigned Website https://pitchblackrecovery.com
- New Android like Power Menu (Activated via power key hold)
- Flashlight toggled by Vol up(+) on hold
- New Scrollable Advanced menu
- Totally Redesigned Icons
- Removed old unnecessary Theming Stuff
- Tested on almost all handy Resolutions
- Flashlight toggle on Lockscreen
- More checks for SAR/Non-SAR\
- New Navbar
- Support on almost all Android version (5.0+)
- Update ozip decrypt
- Fix up ozip print logs & take all paths
- Update FUNDING.yml
- Fixed encrypted removal checks & buttons
- Add Flag for disabling treble compatibility by default
- Is_Data_Wiped: Simplify function signature
- Unified AB_OTA_UPDATER
- Change AB device log storage to /data/recovery
- Delay start if specified in board
- Optimize touchscreen driver initialization delay.
v2.9.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
Downloads
Flashable zip
https://sourceforge.net/projects/po...m-3.0.0-20200806-1712-UNOFFICIAL.zip/download
Contributors
Kenny3fcb , ChaitanayaMittal
reserved
Thanks. Buying this phone tomorrow.
Here we go..
Thanks for the recovery..
Thanks for pbrp. This device gonna rock.
thanks for the recovery sir
This should work on as curtana as well right?
Thanks. need to disable encryption, should i flash any lazyflasher?
btw nice work.
can someone please tell me how to make backups
I want to make backup of my apps and the settings related to it. in backup page I'm getting 2 "super" options what should i so pls help
Encryption problem
It is asking for password when I try to wipe internal storage, showing decryption failed when I try with blank password.....
mohanbarman said:
It is asking for password when I try to wipe internal storage, showing decryption failed when I try with blank password.....
Click to expand...
Click to collapse
i had this issue as well, i fixed it by just starting fresh. flashed stock rom using miflash then rooted it again, watch a video with exact steps. im on a custom rom now but im scared to root it because it bricked my device somehow
Why is there no more update for this recovery?
Unlocked bootloader and flashed recovery (followed the mentioned procedure). Rebooted into the system. Booted back to recovery, replaced by default MIUI recovery. Why? Using MIUI 12 stock
deathgame said:
Unlocked bootloader and flashed recovery (followed the mentioned procedure). Rebooted into the system. Booted back to recovery, replaced by default MIUI recovery. Why? Using MIUI 12 stock
Click to expand...
Click to collapse
I think u need to flash a file lazy flasher.
Or change rom on first recovery boot.
MIUI overwrites recovery to stock.
jthreja said:
I think u need to flash a file lazy flasher.
Or change rom on first recovery boot.
MIUI overwrites recovery to stock.
Click to expand...
Click to collapse
Please provide the link for lazy flasher. Can't find much development and discussion here on xda for this device strange.
Can't flash custom rom just after installing recovery. Can't mount product, vendor etc kind of errors.
deathgame said:
Please provide the link for lazy flasher. Can't find much development and discussion here on xda for this device strange.
Can't flash custom rom just after installing recovery. Can't mount product, vendor etc kind of errors.
Click to expand...
Click to collapse
Need to google bro should not be device specific.
Also you can flash recovery when you are ready to flash the rom. That would be better.
jthreja said:
Need to google bro should not be device specific.
Also you can flash recovery when you are ready to flash the rom. That would be better.
Click to expand...
Click to collapse
I flashed rom just after installing recovery without even booting to system. Got errors while wiping the partitions.
deathgame said:
I flashed rom just after installing recovery without even booting to system. Got errors while wiping the partitions.
Click to expand...
Click to collapse
Have you tried mounting the partitions?
What is the error you get?
jthreja said:
Have you tried mounting the partitions?
What is the error you get?
Click to expand...
Click to collapse
Recovery was unable to mount or unmount product, vendor and system partitions.
Hi,
It is asking for password when I try to wipe internal storage before installing custom rom, showing decryption failed when I try with blank password....
To avoid this issue in future, do i also need to install disable_dm_verity_force_enc zip before magisk?
How to proceed, pls help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
Code:
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Touch Works in all states (No matter about lockscreen there or not)
- Decryption works
- Otg works
- Flash Rom works
- F2FS support
- Fastboot boot command support
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash (system-vendor-product)
INSTALLATION:
1. Download the TWRP image file to your PC.
2. Put your device into fastboot.
3. Type the following command to flash the recovery:-
Code:
fastboot flash recovery "name_of_recovery.img"
4. On installation of TWRP , to boot the recovery do:-
Code:
fastboot boot "name_of_recovery.img"
The device will automatically reboot into TWRP, and you will have TWRP as your permanent recovery!
5. Enjoy!
Download:
TWRP By mahajant99
Donation:
PayPal: PayPal.me/mhjn950
UPI: [email protected]
XDA:DevDB Information
TWRP, Tool/Utility for the Xiaomi Poco X3 NFC
Contributors
mahajant99
Source Code: https://github.com/mahajant99/device_xiaomi_surya_twrp
Version Information
Status: Beta
Beta Release Date: 2020-09-26
Created 2020-09-26
Last Updated 2021-01-02
Reserved
Tyvm
Awesome job, haven't tried it yet, but definitely will when I get my X3
What's the diference between this and [RECOVERY][3.4.0-12][surya]TWRP Xiaomi Poco X3?
For now it's the same I presume
bacitoto said:
What's the diference between this and [RECOVERY][3.4.0-12][surya]TWRP Xiaomi Poco X3?
For now it's the same I presume
Click to expand...
Click to collapse
Other recovery has issues TWRP overwrites, this one is previous version but doesnt have this issue tested is working better more user friendly thanks to the developer
This one doesnt freeze the screen after overwrite Nice job bro!!!
piranime said:
Other recovery has issues TWRP overwrites, this one is previous version but doesnt have this issue tested is working better more user friendly thanks to the developer
This one doesnt freeze the screen after overwrite Nice job bro!!!
Click to expand...
Click to collapse
Yes, works good. Flashed Magisk without Problems and tried some reboots without freezing toucscreen!
This one works flawlessly
This TWRP needs some vbmeta file to survive? Format data working? Decryption?
how to use this recovery on this phone but not to be permanent.. I just need temporary twrp to install magisk zip file... Anyone knows?
BlueMan_86 said:
how to use this recovery on this phone but not to be permanent.. I just need temporary twrp to install magisk zip file... Anyone knows?
Click to expand...
Click to collapse
check the installation steps and skip step no. 3 and proceed to step 4 - that will load twrp only virtually...
Good day guys, question, this TWRP can format data, wipe , etc , flash latest magisk like always ?
Is someone using Xiaomi EU with this TWRP and if can provide instructions for flashing or flashing EU via Miflash I´ve read that it's like a fastboot rom/ . TGZ)?... it´s the only rom for now, and stock rom is a monumental mess....
Before on my previous device Davinci I enter TWRP wipe all, flash custom rom based on MIUI , format data and reboot...
Hello Sir, how to unlock the bootloader?
iamlaybhari said:
Hello Sir, how to unlock the bootloader?
Click to expand...
Click to collapse
Any Tutorial on Youtube for Xiaomi devices with MIUI 11, 12 will work , it's the same method for all
Joakin2k said:
This TWRP needs some vbmeta file to survive? Format data working? Decryption?
Click to expand...
Click to collapse
No, just follow the steps mentioned in thread
Joakin2k said:
Good day guys, question, this TWRP can format data, wipe , etc , flash latest magisk like always ?
Is someone using Xiaomi EU with this TWRP and if can provide instructions for flashing or flashing EU via Miflash I´ve read that it's like a fastboot rom/ . TGZ)?... it´s the only rom for now, and stock rom is a monumental mess....
Before on my previous device Davinci I enter TWRP wipe all, flash custom rom based on MIUI , format data and reboot...
Click to expand...
Click to collapse
Yes you can format data wipe etc stuff with this twrp and also magisk can be flashed with it. Rest yes you can flash EU ROM too, download the eu zip from their site.
Thanks OP
Do you need bootloader unlocked to use this flash recovery i am still waiting 7 days for my bootloader unlock?
jutley said:
Do you need bootloader unlocked to use this flash recovery i am still waiting 7 days for my bootloader unlock?
Click to expand...
Click to collapse
Yeah, unlocked bootloader only.
---------- Post added at 03:06 PM ---------- Previous post was at 03:00 PM ----------
Most of the time this recovery will not save the modification I do in Settings (time format, unchecked install twrp app, time zone, unchecked display sleep). After I reboot to recovery, all settings are default.
Any chance to get an custom recovery that supports Android R?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP version: 3.6.0_11
For device: gta4lwifi
Device tree: https://github.com/pazos/android_device_samsung_gta4lwifi
Maintainer/Authors build: paziusss
Known limitations
FBE encrypted storage (Internal Data) not able to be decrypted in TWRP.
Changelog
2021-12-08:
Added: exfat support
Added: mass storage support
Fixed: USB composition rules
Supressed audit messages in logcat
Misc changes (see device tree for details)
2021-12-05: Initial release
Motivation and credits.
AFAICT there're two TWRP builds on xda for the SM-T500, made by ragarcia87 and agreenbhm
The main motivation for Yet Another TWRP build was getting fastboot working, so we can follow official instructions to flash GSI builds on our devices.
Credits to u/agreenbhm for the device tree: https://github.com/agreenbhm/android_device_samsung_gta4lwifi
Credits to u/ragarcia87 for the thread, which I used as a template for this one
Installation Instructions
Spoiler
From computer:
Download Odin Flashable Tar from bellow
Put tablet into Odin Download Mode
Flash Blank vbmeta via Userdata
Flash Odin Flashable Tar via AP
From TWRP:
Download recovery.img from below
Copy recovery.img to device
Install > Install Image > recovery.img to Recovery
Reboot > Recovery
Flashing system/vendor/product/odm partitions
Spoiler
Logical partitions are read only from TWRP. If you want to flash them you'll need to reboot in fastbootd.
Boot in TWRP
Go to reboot and select fastboot.
Wait until you see a TWRP dialog saying "entered in fastboot"
Once you flashed all desired partitions reboot to recovery
In recovery wipe -> format data.
Notes on GSI flashing:
/product partition is unused in GSI builds. You can flash an empty image to gain 1GB for other logical partitions.
/system partition will be resized to the size of the GSI image you're flashing.
Thanks for migrating this to Android 11! One issue I'm seeing is that I can't mount the Micro SD card.
Also, the link for your device tree seems to be broken. Could you please update?
Hi Magendanz. Thanks for your feedback.
I have no issues mounting the MicroSD card. Do you have some logs?
Updated DT link!
About the device tree: I'm having trouble pushing the changes to github because my slow connection. Will see if I got them pushed somehow. If not I will revert blobs to agreenbhm version.
Magendanz said:
Thanks for migrating this to Android 11! One issue I'm seeing is that I can't mount the Micro SD card.
Also, the link for your device tree seems to be broken. Could you please update?
Click to expand...
Click to collapse
paziusss said:
I have no issues mounting the MicroSD card. Do you have some logs?
Click to expand...
Click to collapse
Here's the log...
Hi!
Indeed, I didn't test with exfat. Should be fixed soon. Also adb sideload don't work in the version attached.
I will make the changes ASAP and give a better commit history in device tree
Hi. Device tree updated with support for exfat and ADB sideload fixed.
Will upload the binaries in a few hours!
Thanks for bringing a nicer TWRP for GSI loading to our devices. I flashed this with no issues, but I am really struggling to get my device to boot any GSI. I am sure it is something that I am doing wrong on my end, since I have not messed with Samsung devices or any GSI installations before. Is there a change to have a more in-depth guide written up on installing a GSI on our device, or is there one already available that has similar instructions? I am planning on starting from scratch once I get home, and would like to have all of my ducks in a row before attempting again.
stompysan said:
Thanks for bringing a nicer TWRP for GSI loading to our devices. I flashed this with no issues, but I am really struggling to get my device to boot any GSI. I am sure it is something that I am doing wrong on my end, since I have not messed with Samsung devices or any GSI installations before. Is there a change to have a more in-depth guide written up on installing a GSI on our device, or is there one already available that has similar instructions? I am planning on starting from scratch once I get home, and would like to have all of my ducks in a row before attempting again.
Click to expand...
Click to collapse
Sure, I'll write a deep guide when I get basic stuff sorted out.
For starters, it is:
On TWRP -> Reboot -> Fastboot
Let the device reboot, wait until you see TWRP "entered fastboot"
Check your computer sees the device with
fastboot devices
(retry until it does)
Now erase system and flash a new image:
fastboot erase system
fastboot flash system whatever-aosp-gsi-ab-arm64.img
Finally reboot to recovery
fastboot reboot recovery
And format data:
Wipe -> Format data
Now you can reboot to the system. It will work.
I've tested it with Google AOSP builds, PHH builds and LineageOS builds based on PHH.
Bugs you'll find on any GSI build:
1. MTP doesn't work (needs a kernel change)
2. Brightness slider doesn't work (can be fixed easily without kernel change)
3. Probably more that I didn't found yet
Hi. I've updated recovery binaries and added a changelog.
Please report the issues you find.
paziusss said:
Sure, I'll write a deep guide when I get basic stuff sorted out.
For starters, it is:
On TWRP -> Reboot -> Fastboot
Let the device reboot, wait until you see TWRP "entered fastboot"
Check your computer sees the device with
fastboot devices
(retry until it does)
Now erase system and flash a new image:
fastboot erase system
fastboot flash system whatever-aosp-gsi-ab-arm64.img
Finally reboot to recovery
fastboot reboot recovery
And format data:
Wipe -> Format data
Now you can reboot to the system. It will work.
I've tested it with Google AOSP builds, PHH builds and LineageOS builds based on PHH.
Bugs you'll find on any GSI build:
1. MTP doesn't work (needs a kernel change)
2. Brightness slider doesn't work (can be fixed easily without kernel change)
3. Probably more that I didn't found yet
Click to expand...
Click to collapse
Will it work with Pixel Experience?
EdwardTCM said:
Will it work with Pixel Experience?
Click to expand...
Click to collapse
I didn't try. Install instructions are the same for all GSI roms. You can get a big list of GSIs in https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Some roms are bigger than stock, so you'll need to delete/wipe your product partition first. OP has instructions about it. I personally prefeer to flash an empty product.img instead of deleting the logical partition, to avoid TWRP warnings trying (and failing) to mount the partition.
paziusss said:
I didn't try. Install instructions are the same for all GSI roms. You can get a big list of GSIs in https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Some roms are bigger than stock, so you'll need to delete/wipe your product partition first. OP has instructions about it. I personally prefeer to flash an empty product.img instead of deleting the logical partition, to avoid TWRP warnings trying (and failing) to mount the partition.
Click to expand...
Click to collapse
Alright Thanks
paziusss said:
Sure, I'll write a deep guide when I get basic stuff sorted out.
For starters, it is:
On TWRP -> Reboot -> Fastboot
Let the device reboot, wait until you see TWRP "entered fastboot"
Check your computer sees the device with
fastboot devices
(retry until it does)
Now erase system and flash a new image:
fastboot erase system
fastboot flash system whatever-aosp-gsi-ab-arm64.img
Finally reboot to recovery
fastboot reboot recovery
And format data:
Wipe -> Format data
Now you can reboot to the system. It will work.
I've tested it with Google AOSP builds, PHH builds and LineageOS builds based on PHH.
Bugs you'll find on any GSI build:
1. MTP doesn't work (needs a kernel change)
2. Brightness slider doesn't work (can be fixed easily without kernel change)
3. Probably more that I didn't found yet
Click to expand...
Click to collapse
I flashed phhusson's GSI rom but my galaxy tab a7 keeps boot looping
paziusss said:
Sure, I'll write a deep guide when I get basic stuff sorted out.
For starters, it is:
On TWRP -> Reboot -> Fastboot
Let the device reboot, wait until you see TWRP "entered fastboot"
Check your computer sees the device with
fastboot devices
(retry until it does)
Now erase system and flash a new image:
fastboot erase system
fastboot flash system whatever-aosp-gsi-ab-arm64.img
Finally reboot to recovery
fastboot reboot recovery
And format data:
Wipe -> Format data
Now you can reboot to the system. It will work.
I've tested it with Google AOSP builds, PHH builds and LineageOS builds based on PHH.
Bugs you'll find on any GSI build:
1. MTP doesn't work (needs a kernel change)
2. Brightness slider doesn't work (can be fixed easily without kernel change)
3. Probably more that I didn't found yet
Click to expand...
Click to collapse
I'm trying to flash the ROM I downloaded but I keep getting Sparse errors and when it finishes I get this FAILED (remote: Operation not permitted)
Edit: Maybe this is happening because of the ROM being A only
EdwardTCM said:
I flashed phhusson's GSI rom but my galaxy tab a7 keeps boot looping
Click to expand...
Click to collapse
You need one of the ARM64 AB variants. No matter if it is vanilla, floss or gapps.
thank you for twrp and fastboot but i noticed that most gsi images are bugy no brightness or randemly rebooting
paziusss said:
You need one of the ARM64 AB variants. No matter if it is vanilla, floss or gapps.
Click to expand...
Click to collapse
OOOH I thought it was A Only
EdwardTCM said:
I'm trying to flash the ROM I downloaded but I keep getting Sparse errors and when it finishes I get this FAILED (remote: Operation not permitted)
Click to expand...
Click to collapse
paziusss said:
Sure, I'll write a deep guide when I get basic stuff sorted out.
For starters, it is:
On TWRP -> Reboot -> Fastboot
Let the device reboot, wait until you see TWRP "entered fastboot"
Check your computer sees the device with
fastboot devices
(retry until it does)
Now erase system and flash a new image:
fastboot erase system
fastboot flash system whatever-aosp-gsi-ab-arm64.img
Finally reboot to recovery
fastboot reboot recovery
And format data:
Wipe -> Format data
Now you can reboot to the system. It will work.
I've tested it with Google AOSP builds, PHH builds and LineageOS builds based on PHH.
Bugs you'll find on any GSI build:
1. MTP doesn't work (needs a kernel change)
2. Brightness slider doesn't work (can be fixed easily without kernel change)
3. Probably more that I didn't found yet
Click to expand...
Click to collapse
To anyone who wants to try the Pixel Experience rom
USE A/B NOT A ONLY
EdwardTCM said:
To anyone who wants to try the Pixel Experience rom
USE A/B NOT A ONLY
Click to expand...
Click to collapse
Btw the wifi doesn't work
One Issue when downgrading to TWRP 3.5 is that it will boot loop
OrangeFox Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
OrangeFox is FREE SOFTWARE
Information
Status: unofficial Beta
Android 12 only
Version: R11.1_1
Release Date: 11th October 2022
Updated: February 2023
Maintainer: @CFKod
Sources
Device Tree: https://github.com/forforksake/recovery_device_motorola_kyoto
Kernel: Prebuilt
Downloads:
onedrive
github releases
Installation:
This is an A/B device, it does not have a recovery partition
It also does not allow fastboot boot command
Only option is this case it to fastboot flash boot ofox.img from bootloader, then select recovery mode, once booted into recovery, flash your stock boot image followed by flashing the ofox.zip (to install the recovery to ramdisk)
Code:
fastboot flash boot ofox.img
Select recovery mode from the bootloader menu
Once ofox has loaded
install your stock boot.img to boot parition
Install ofox.zip
Reboot to bootloader and then select recovery mode
You are now in Orangefox recovery
Install magisk from files menu included
https://wiki.orangefox.tech/en/guides/installing_orangefox
Documentation (FAQ):
https://wiki.orangefox.tech/en/guides
Source changelog:
https://wiki.orangefox.tech/changelog
Unlocked Bootloader required
Moto unlocking site
vbmeta flags
From bootloader, Flash vbmeta from your firmware zip using two important flags
(--disable-verification --disable-verity)
Code:
fastboot flash vbmeta --disable-verification --disable-verity vbmeta.img
Torch not yet working and in order to fit into the devices small boot image AAPT has also been removed.
XDA : DevDB Information
OrangeFox Recovery Project, Tool/Utility for Kyoto
(Tested on Motorola Edge 20 lite 5G)
Contributors
@CFKod
Credits
* TeamWin - for TWRP
* The OrangeFox Team - for your hard work
* Maintainer @CFKod
ADB sideload not working with the img, it terminates sideloads with the following error: Failed to unmount vendor
The image is purely to allow you to flash your own stock boot image... Then install orange fox recovery ramdisk over your stock boot by flashing the zip
Unlocked Bootloader required
Moto unlocking site
vbmeta flags
From bootloader, Flash vbmeta from your firmware zip
using two important args
--disable-verification --disable-verity
Makefile:
fastboot flash vbmeta --disable-verification --disable-verity vbmeta.img
Thanks!
installation
From unlocked BL with patched vbmeta,
Fastboot flash boot ofox.img
Select recovery mode in bootloader > boot into ofox recovery
install your stock A12 boot.img **do not reboot**
flash release zip _this simply installs recovery ramdisk_.
flash magisk.zip if required
CFKod said:
installation
From unlocked BL with patched vbmeta,
Fastboot flash boot ofox.img
Select recovery mode in bootloader > boot into ofox recovery
install your stock A12 boot.img **do not reboot**
flash release zip _this simply installs recovery ramdisk_.
flash magisk.zip if required
Click to expand...
Click to collapse
i cant neither boot or flash the recovery
i have magisk installed anf i have ramdisk. what is wrong here??? thx for help
hmmm, now i 'm getting error E3004: this package is for kyoto. this device not supported
update: i'm now able to flash orangefox.img, but when i boot to recovery ,instead it reboots bootloader :\
freakologik said:
update: i'm now able to flash orangefox.img, but when i boot to recovery ,instead it reboots bootloader :\
Click to expand...
Click to collapse
Sorry for the delay
I have now resolved that issue
Please see the ofox Img...
This will allow you to boot recovery
Then install stock
Followed by ofox zip
ofox
Folder
1drv.ms
freakologik said:
i cant neither boot or flash the recovery
View attachment 5729847
i have magisk installed anf i have ramdisk. what is wrong here??? thx for help we
Click to expand...
Click to collapse
freakologik said:
i cant neither boot or flash the recovery
View attachment 5729847
i have magisk installed anf i have ramdisk. what is wrong here??? thx for help
Click to expand...
Click to collapse
Wait..
The device doesn't have a recovery partition and it also doesn't allow us to fastboot boot
It only allows us to fastboot flash boot boot.img
I tried to make that clear on the release download
I will update the main thread
CFKod said:
Wait..
The device doesn't have a recovery partition and it also doesn't allow us to fastboot boot
It only allows us to fastboot flash boot boot.img
I tried to make that clear on the release download
I will update the main thread
Click to expand...
Click to collapse
yeah in the meantime i've understand it
i try install now
thanks for your work and time
freakologik said:
yeah in the meantime i've understand it
i try install now
thanks for your work and time
Click to expand...
Click to collapse
Thanks, I overly panicked haha.
If you are on telegram
Feel free to message me directly
@cardiffian
it's working,finally!!!
a question : to use the recovery can i never use pin/fingerprint? it's not clear for me
freakologik said:
it's working,finally!!!
a question : to use the recovery can i never use pin/fingerprint? it's not clear for me
Click to expand...
Click to collapse
Fantastic news
Well, try rebooting to android,
Create the lockscreen protection again;
Reboot to OrangeFox
Decrypt... Fingers crossed
So I successfully decrypted user data on my first beta dated 03-10-22
Used it perfectly for quite a few days.
I've added a folder to onedrive as 03102022 with the zip, feel free to try it if you can't get anywhere with user decryption in current build.
However, I have since had to make some build tweaks to try and improve what we had... Testing backup restore etc...
Now Userdata decryption only works for me when lockscreen pin is removed...
I'm correcting some annoyances and mount errors in the logs... And reverting some of the changes I have since made. So will let you know once I have uploaded.
Also some excellent advice on the ofox wiki - I have format /data already to test the feature, so perhaps my next step is fastboot - w and start a fresh
https://wiki.orangefox.tech/en/guides/encryption
Only tested on a 12
Unfortunately I no longer have a working kyoto device
Smashed the LCD for a 2nd time.
I can access the device itself via adb, so I get to mess around with phonesploit / metasploit framework without any worry if I break it
I can't see the lcds for these things becoming cheap and widely available for a while, so for now it joins the graveyard of android devices in mydrawer
Purchased a pixel 6a
@CFKod
How to upload these Recovery?
Thank you in advance.
I need help in my thread, do you know how to do it?
Questions about firmware
Hi. I want to change the software channel from pluspl to RETEU. How to do it? Anyone help? Thanks in advance, best regards.
forum.xda-developers.com
.