Hello All!
So i decided to ask for your help dear developers
Well, i'm runing latest Cm9 build and i have a problem with lockscreen....when I Unlock the screen it is flickering once, then it's ok...is an anoiyng bug...in Cm7 was implemented On-Screen animation...jus like Off-Screen animation...I realy want to implement myself that On-screen animation or if i could "remove" this anoyng bug with screen flickering..:|...please somebudy can help me?...I searched alot and i don't find anything...
Here is a video ...:
http://www.youtube.com/watch?v=bIjXIaV48B8
My Devices is: Lg Optimus Sol runnig Cm9 latest build..
Q&A for [ROM] Dirty Unicorns 4.4.4 {Jewel} v8.0 [Both New/Old Partition]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
HTC evo 4G LTE s-on
Can some please tell me if is possible to install the DU V8 ROM on the HTC evo 4g LTE s-on, because I have tried and will only get me to the logo at the boot screen and stays there. Thanks
yhwh111 said:
Can some please tell me if is possible to install the DU V8 ROM on the HTC evo 4g LTE s-on, because I have tried and will only get me to the logo at the boot screen and stays there. Thanks
Click to expand...
Click to collapse
Reboot into fastboot and fastboot flash boot boot.img from the du.zip
I'm trying to install V4A, which works with every other ROM I've tried, but it will not install on this ROM and claims a busybox error. When I go to install busybox, I see that the current version is 1.21, which is outdated. The most recent version, 1.22, installs just fine and there are no errors from the busybox (stericson) app, but when I reboot and try installing V4A, it fails with the same busybox error. Again, this is the only ROM that V4A does not work with, so I know it's not a compatibility issue with the apk I'm using. I've tried it on Liquidsmooth, Omni, InsertCoin, Viper, and several others, both on KK ROMs and JB ROMs, and they all have installed V4A just fine. I am on the latest hboot, radio, and firmware, using Captain Throwbacks 2.8.0.3 TWRP recovery, and have not had any problems with V4A installing on any other ROMs until this ROM. I would greatly appreciate any suggestions or information about this issue. If there is a better audio mod that works with this ROM I will gladly try it out because I much prefer this ROM over any other stock KK ROMs. Thanks in advance.
GAPPS for 8.1?
Is there a GAPPS available for 8.1? I only see GAPPS for 8.0 available in the weeklies.
can this happen lol?
hi is it possible to put this rom on my evo 4G not LTE with hboot 2.10.0001 and s-off? Would i have to install the cpatins sense rom and bootloader in order for this to work? or can i simply not because its not an LTE device?
Please help, I install DU from twrp 2.8 and it goes fine, with no errors. But, when I reboot to system, it flashes with HTC logo and then it stuck with black screen. Is this a known issue?
Dirty Unicorns 4.4.4 {Jewel} 8.1
after much learning and trial and error i have up and running Dirty Unicorns 4.4.4 {Jewel} 8.1 on my Sprint Evo 4g Lte.
My job uses MDM to manage devices and deliver work/corporate email.
My job requires the device be encrypted.
when i try to encrypt my phone, it reboots and doesn't go through the encryption process.
I read post that have a custom rom on my phone should not prevent it for being encrypted.
are we able to encrypt device with this rom? how? Help//
help
I updated my Evo 4g lte to be able to use CM11 and now use Dirty Unicorn 4.4. I have some questions/problems I hope some one can help me with.
First I sometimes have a problem when I'm watching a youtube video and turn the phone to go to landscape mode, the phone will freeze and then reboot. Not sure what's going on with this.
Second, yesterday something happened to my phone. It was setup with the status bar at the top where the time and date are. At some point during the day the phone decided it would hide the time and date etc. If I swipe down, like I want to open the quick settings, the time and date will appear but after a couple seconds it disappears again. How do I change that so the time and date will stay visible?
help
I updated my Evo 4g lte to be able to use CM11 and now use Dirty Unicorn 4.4. I have some questions/problems I hope some one can help me with.
First I sometimes have a problem when I'm watching a youtube video and turn the phone to go to landscape mode, the phone will freeze and then reboot. Not sure what's going on with this.
Second, yesterday something happened to my phone. It was setup with the notification bar at the top where the time and date are. At some point during the day the phone decided it would hide the time and date etc. If I swipe down, like I want to open the quick settings, the time and date will appear but after a couple seconds it disappears again. How do I change that so the time and date will stay visible?
Well I figured out that I had expanded view on
---------- Post added at 03:36 PM ---------- Previous post was at 03:35 PM ----------
But I still have the problem with the sporadic freezing and rebooting
Zeranoe said:
Is there a GAPPS available for 8.1? I only see GAPPS for 8.0 available in the weeklies.
Click to expand...
Click to collapse
You can use the same GAPPS. They don't change just because the ROM version does.
They only change if the Android version changes from say Kitkat to Lollipop.
In this case, you're good man.....
New Download Link plz
DU v8.2 Link for Jewel no longer valid. Please supply new link.
Any word on lollipop for the old partition? Thanks.
Sent from my EVO LTE using XDA Free mobile app
I've tried uninstalling, wiping, EVERYTHING, and the wifi doesn't even turn on. I can't activate data because the phone doesn't have a plan anymore.
Any quick solution i missed while skimming the thread of help?
Q&A for [ROM][UB][4.4.4][AROMA]UltraXperia™ Revolution v2.0 [04.08.2014][CONTINUED]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UB][4.4.4][AROMA]UltraXperia™ Revolution v2.0 [04.08.2014][CONTINUED]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
awesome work!
This ROM is simply awesome. It's easy to install (I get bootlop for first time, but fixed it, definitely my bad xD).
It's perfect ROM for people, who looking for sony stock-looking, great for daily using Android.
I'm using version 1.8. I really love smoothness, and stability of this rom. It have little bugs, but - nevermind.
Good things:
Stock Sony apps
CM based ROM
Fully working Polish language
Sony theme, which is exact port from Z series
Absolutely great for daily use, nearly fully functional
Fully working notification bar, LED & sensors
Did I mention smoothness?
Annoying things:
Keyboard is missing sometimes.
THIS clock widget font... Don't like it. It's looking quite silly in my opinion. It should look like Sony stock clock font. ht tp://andro idswiki.com/wp-content/uploads/2014/07/Xperia-Z2.jpg
There is no screen unlock animation from Z2.
Dialer, camera UI does not look like in Z2 firmware.
NFC Tags not working. But it's not so important.
In Aroma installer, user should have more choice between stock looking icons, UI options, etc. To personalise it even better.
(i don't like icons look in 2.0, that's why i didn't install it... I know, stupid xD)
Notification bar is not transparent.
Bad things:
Hmm... Not found.
So... In my opinion this ROM is such awesome. If developers could work at things what I mentioned in "Annoying", this rom will be such a masterpiece.
@MT27i Bro can you port this awesome rom for Xperia u (st25i)
Sent from my ST25i using XDA Free mobile app
I do all the process but after installation my xperia u dosent boot its showing dark screen.
it also showing dark screen when i flash the given boot.img file with the rom, then i use the image of cm11 rom and start installing the rom but when its finish it does not boot.
i really like your rom and want to use it plz help i am now using cm11 rom.
thanks in advance
Disregard my previous statement:
i am stuck at the blue screen. its like a live wall paper. For the moment i am switching to stock rom. But please reply to this message so that i can get back to this rom.
Thanks.
Please also give the ROM Android 5 thanks
help
i have flash the boot.img
but icoudnt go to recovery
after seeing sony logo i press volume-
but nothing happen and screen go black
AviRaj said:
I do all the process but after installation my xperia u dosent boot its showing dark screen.
it also showing dark screen when i flash the given boot.img file with the rom, then i use the image of cm11 rom and start installing the rom but when its finish it does not boot.
i really like your rom and want to use it plz help i am now using cm11 rom.
thanks in advance
Click to expand...
Click to collapse
I worked to run this rom on xperia u, but phone is stuck at boot animation
Sent from my ST25i using XDA Premium app
How to disable home screen rotation?
This ROM is Nice, smooth and beautiful. But i just have a little problem with it right now, is there any way to disable the auto rotation on the home screen? It ruined my wallpapers after i set them as the home screen walpaper, because after the home screen goes back to potrait from landscape mode, my wallpapers will not fill the other page on the home screens (there's some black color beside the wallpaper). I'm using the latest version (2.0) Thank you.
Hi everyone, I've been annoyed by this missing coloured emoji problem for quite some time now and don't know how to solve it.
I'm on the latest official miui global beta 7.7.13
http://imgur.com/l1u4PHg
I have magisk with emojione installed.
Even without it, these few emojis still don't have colour
Would appreciate if anyone could check if they are facing the same issue, or post the solution here. Thank you
have you managed to find the solution? I'm on MIUI 10 now and the same emojis aren't fixed yet...
Hi,I have an issues with proximity senzor on my 3SE aka Kate . I am on LOS 15.1 - tried flash back MIUI, reset senzor there and back to LOS.Tried app proximity senzor reset/optimizer but ... still facing that issues
Anyone have/know how to fix?Thanks in advance
Try flashing agni
wrong section, it is not a development topic.