Question Hard Bricked my realme gt when trying to root, anyone know how to unbrick it? - Realme GT

hello, i hard bricked my device when i tried to root it. anyone can help to unbrick? instructions? mine is eu version. thanks in advance

What were the steps you did that resulted in bricking your device? Did you make a backup by any chance?

crossdeath said:
What were the steps you did that resulted in bricking your device? Did you make a backup by any chance?
Click to expand...
Click to collapse
device bootloped while rooting device then tried to flash stock rom using xda tutorial. i ran the commands they killed the device completely. nothing is working no display nothing.

See below link
HELP REALME GT 8/128 CN HARDBRIK
Hi guys, I recently bought a gt realme on aliexpress and I didn't realize it was the cn version, while trying to change the rom via flashboot my pc died, in the middle of the process. Now it doesn't turn on, and when connected via usb only the...
forum.xda-developers.com
Try to contact @hoangzk9

Related

[Q] MTK6573 I9100 unbricked

Hi All,
I have a galaxy s II clone from China. I have tried to flash it and it's bricked.
So I would like to revive it somehow. Can anyone help me how?
The only one way how I can connect to phone with adb. I've tried to flash an original Galaxy S II recovery and boot image but it doesn't work.
If you know the way how to di it or have an original rom for this phone please answer to my note.
Thanks, K
9100 bricked
kusinczky said:
Hi All,
I have a galaxy s II clone from China. I have tried to flash it and it's bricked.
So I would like to revive it somehow. Can anyone help me how?
The only one way how I can connect to phone with adb. I've tried to flash an original Galaxy S II recovery and boot image but it doesn't work.
If you know the way how to di it or have an original rom for this phone please answer to my note.
Thanks, K
Click to expand...
Click to collapse
Hi,
I never know exactly your model but the phone based on mtk6573 are all the same, first of all I need to know the way you choose for reprogram the phone...I hope that you choose Sp flash tool...and you unselect the first two selection before reprogram. If not, the only way you have are trying to find the original ROM in flash mode not in .zip mode!! or send me the phone
hi,
Thanks your reply. I tried to find our phone's rom but unsuccessfully.
If you know how to find it please help me.
Thanks in advance
Do you have anyone have any solutions?

[Q] Bricked Alcatel One Touch 4030X

Hi there! I bricked my alcatel by deleting a folder which apparently was vital for android. Is there any way to unbrick it without paying a visit to alcatel's service? I need PWM or TWRP to flash it with the stock rom, right? Unfortunately I hadn't installed either, so is there any other way to flash the stock rom now?
nougiw said:
Hi there! I bricked my alcatel by deleting a folder which apparently was vital for android. Is there any way to unbrick it without paying a visit to alcatel's service? I need PWM or TWRP to flash it with the stock rom, right? Unfortunately I hadn't installed either, so is there any other way to flash the stock rom now?
Click to expand...
Click to collapse
download one touch upgrade 2.7.3 and upgrade your phone and u'll get back your original system.. :good:
Call_Me_Hudson said:
download one touch upgrade 2.7.3 and upgrade your phone and u'll get back your original system.. :good:
Click to expand...
Click to collapse
No, the OTUS trick didn't work for me. The only way to fix this is by having the stock ROM which is the 4030X. If anyone has it or has Alcatel One touch S'Pop with 4030X(not A,D,E,Y only X) firmware, please pm me.
nougiw said:
No, the OTUS trick didn't work for me. The only way to fix this is by having the stock ROM which is the 4030X. If anyone has it or has Alcatel One touch S'Pop with 4030X(not A,D,E,Y only X) firmware, please pm me.
Click to expand...
Click to collapse
who was the original ROM firmware from
hhan2220 said:
who was the original ROM firmware from
Click to expand...
Click to collapse
What do you mean? It was android 4.1 for Alcatel One Touch S'Pop. And the code of the ROM is 4030X
4030A is for America
4030D & 4030E is for the dual sim variant of S'Pop (named Glory 2) for Europe and Asia correspondingly
4030Y is the NFC version.
I guess 4030X is Europe and single sim
At this moment I have used 4030E to unbrick it but I have locked networks, no Greek, 2 sim operating system and an S'Pop which says Glory 2 on boot up. It's not very possible I get a warranty-covered fix in this situation.
I can use the rom from any stock 4030X, I'm just looking for a 4030X owner with a non-bricked device to contact me.
nougiw said:
What do you mean? It was android 4.1 for Alcatel One Touch S'Pop. And the code of the ROM is 4030X
4030A is for America
4030D & 4030E is for the dual sim variant of S'Pop (named Glory 2) for Europe and Asia correspondingly
4030Y is the NFC version.
I guess 4030X is Europe and single sim
At this moment I have used 4030E to unbrick it but I have locked networks, no Greek, 2 sim operating system and an S'Pop which says Glory 2 on boot up. It's not very possible I get a warranty-covered fix in this situation.
I can use the rom from any stock 4030X, I'm just looking for a 4030X owner with a non-bricked device to contact me.
Click to expand...
Click to collapse
Now a days handset manufactures customise ROM for different markets they see (sim free) OR the sales channel through service providers (network sales) . they also tweak the ROM loader points accordingly. So the only option for you is to find out where the original ROM backup and try and load it.
Any luck finding the stock ROM for the 4030X model?
d3vil said:
Any luck finding the stock ROM for the 4030X model?
Click to expand...
Click to collapse
No, unfortunately I haven't so far. Could you possibly help me with that?
Hi
Im looking for firmware for this mobile with have polish lang inside...I have the device fully working without lock but i gues is to late.
Ps if You still w8ing for firmware and can copy from my device its ok only tell me how to do it.
arturkolacz said:
Hi
Im looking for firmware for this mobile with have polish lang inside...I have the device fully working without lock but i guess is to late.
Ps if You still w8ing for firmware and can copy from my device its ok only tell me how to do it.
Click to expand...
Click to collapse
You are not late at all. I haven't found anything yet, so I'd be awfully thankful to you if you'd help me.
1)Does your language menu include greek?
2)Does your phone say "onetouch s'pop" when it's starting?(or it says "onetouch Glory2"?)
3)Does your firmware version in settings say 4030X?(or it says 4030E/4030D/4030A?)
nougiw said:
You are not late at all. I haven't found anything yet, so I'd be awfully thankful to you if you'd help me.
1)Does your language menu include greek?
2)Does your phone say "onetouch s'pop" when it's starting?(or it says "onetouch Glory2"?)
3)Does your firmware version in settings say 4030X?(or it says 4030E/4030D/4030A?)
Click to expand...
Click to collapse
1) No
2) Onetouch s'pop
3) Yes its 4030X
arturkolacz said:
1) No
2) Onetouch s'pop
3) Yes its 4030X
Click to expand...
Click to collapse
I've sent you a couple private messages, have you seen 'em? I'm asking because I got no reply yet...
Not much of an android expert, but I recently(as in 5 hours ago) bricked my one touch 4033a and I was pretty frantic. But, you should be able to reset the phone through holding down volume then power. Unless that is not possible as well. I'm not sure if the rom from my provider will be able to help you. PM me if that's possible, and instruct me how to do that.
one touch 4030x
Hi my onetouch s pop (4030x) is stuck on boot screen, have tried pwr+vol up, factory rset but it still hangs on the boot screen. Have tried update manager it just says I have latest version and quits, so am stuck on boot screen not knowing what to do. it has never been rooted, just stock, not many apps on it either, running Jelly Bean, any help much appreciated.
Thank you
clay0001 said:
Hi my onetouch s pop (4030x) is stuck on boot screen, have tried pwr+vol up, factory rset but it still hangs on the boot screen. Have tried update manager it just says I have latest version and quits, so am stuck on boot screen not knowing what to do. it has never been rooted, just stock, not many apps on it either, running Jelly Bean, any help much appreciated.
Thank you
Click to expand...
Click to collapse
I finally took it to the service center and had it fixed. They charged nothing. They didn't even ask anything. This is your best chance if you'd ask me. Yet when I get back home cause I'm away for a couple days, I could possibly send you my backup to try and upload it to your phone, but I have to warn you that this is highly probable to complicate things even more. Think it over and let me know.
I may just do that, phone only a few months old, not been touched rooting wise, sure it may be an app that caused the prob, will have to see if I can find the receipt for it, was only bought as a cheap replacement till I can get a better phone. Don't have much luck with phones, already got two bricked Moto Defy's, Don't know if half my problem is running win7 as a virtual machine on a mac
clay0001 said:
I may just do that, phone only a few months old, not been touched rooting wise, sure it may be an app that caused the prob, will have to see if I can find the receipt for it, was only bought as a cheap replacement till I can get a better phone. Don't have much luck with phones, already got two bricked Moto Defy's, Don't know if half my problem is running win7 as a virtual machine on a mac
Click to expand...
Click to collapse
Don't even think about it. Since you haven't even routed the phone, service center is way your best solution. Do find that receipt!!
[deleted]
[deleted]
clay0001 said:
Hi my onetouch s pop (4030x) is stuck on boot screen, have tried pwr+vol up, factory rset but it still hangs on the boot screen. Have tried update manager it just says I have latest version and quits, so am stuck on boot screen not knowing what to do. it has never been rooted, just stock, not many apps on it either, running Jelly Bean, any help much appreciated.
Thank you
Click to expand...
Click to collapse
Hi there Junior and everybody
I am EXACTLY in the same situation. I was messing with the vold.fstab in order to switch external memory card as internal, and... BRICK!
Blank screen after "Alcatel'SPop" welcome logo. I tryed PWR+VOLUP and then "wipe data/factory reset" (without knowing what that really meant, i have to say and nothnig happened, i am still in stuck in the blank screen.
If i could get a rom image, i guess i could copy it into the external memory card and "apply update form phone memory".. Isn't it?
If so, now the issue is to find the proper rom: Alcatel onetouch S pop (4030X)
Any hint, help, advise?
thank you

[Q] Find 7 Clone MT6572 Bricked! helpp!!

Hi... Can you please help me... a Few minutes ago i bricked my friend phone because i dont know that his phone was a clone...i tried to flash his recovery through mobileuncle and it say success but after i reboot the phone just not wouldnt start... (a black screen with baclight On only)...
Can you upload a rom for me...? Maybe im scared right now... i can fix any phone that is original but not a clone.. i am also experienced with the sp flashtool as i have flashed lenovo a850+ and a850 a lot of times... pls help me!?
fastboot mode, restore a recovery...
Some Oppo build flash recovery !!!
But its an oppo find 7 clone... i mnaged to turn it on somehow and from oppo bootscreen it changed to Gowin bootscreen... after some googling i managed to find out that its the same look and design as the Gowin M7
If it's MTK-based, it's not a clone, it's a completely different device.
A true "clone" would be identical internally and be able to run Oppo software without modification.
No one here can help you since you're messing with some noname MTK device.
Entropy512 said:
If it's MTK-based, it's not a clone, it's a completely different device.
A true "clone" would be identical internally and be able to run Oppo software without modification.
No one here can help you since you're messing with some noname MTK device.
Click to expand...
Click to collapse
Lol... its device name is : android... not gonna help much... anyway thanks...

Bricked/Bootloop Samsung A9 Pro 2016 Vietnam Copy

Good day maam/sir,
im a new guy here and i want to say hello to all of you. is there any chance or solutions you can offer or share for to fix my bricked/bootloop Samsung A9 Pro Vietnam Copy/Clone??? thank you in advance to all of you, God Bless!!!
Staine777 said:
Good day maam/sir,
im a new guy here and i want to say hello to all of you. is there any chance or solutions you can offer or share for to fix my bricked/bootloop Samsung A9 Pro Vietnam Copy/Clone??? thank you in advance to all of you, God Bless!!!
Click to expand...
Click to collapse
so if you want help, you need to provide more information
please answer to the following questions
Bricked? bootloop at bootanimation, or stuck at bootlogo
processor? Mediatek MT6795?
how did it brick, what have you done brofre it bricked
stock rom aviable anywhere?
-- tried to flash stock rom with SP-Flashtool?
TimurAlaskara_TR said:
so if you want help, you need to provide more information
please answer to the following questions
Bricked? bootloop at bootanimation, or stuck at bootlogo
processor? Mediatek MT6795?
how did it brick, what have you done brofre it bricked
stock rom aviable anywhere?
-- tried to flash stock rom with SP-Flashtool?
Click to expand...
Click to collapse
i cant determine sir if it is brick or bootloop but one thing is for sure it is stocked on Samsung Logo. i was rooting my phone sir via kingroot. the root was a success but the SuperSU binary failed to update so i install and run SuperSUme. after the process i rebooted it because it says so, and that were the problem started sir. i think ROMs are available. but the device cannot be putted on Download Mode for Odin, id already tried it sir. i dont have any reference left sir. please, please, please help me sir... Thank you very much sir...
Staine777 said:
i cant determine sir if it is brick or bootloop but one thing is for sure it is stocked on Samsung Logo. i was rooting my phone sir via kingroot. the root was a success but the SuperSU binary failed to update so i install and run SuperSUme. after the process i rebooted it because it says so, and that were the problem started sir. i think ROMs are available. but the device cannot be putted on Download Mode for Odin, id already tried it sir. i dont have any reference left sir. please, please, please help me sir... Thank you very much sir...
Click to expand...
Click to collapse
I had a clone s4 some time ago called No1 S6, after some time its internal sd card got broken... i do not recommend it to root and flash custom rom to that phones.
it had an mtk6582 which was a midrange SoC while that now its one of the crappiest chipsets..
however, clone mediatek phones do not have a "download mode", so odin does not work as well
You need to get the real name of the phone, i think there was a youtuber who reviewed a clone galaxy a9 his youtubechannel name was "mayiandjay" you could contact him via email for the devices name.
Then search on needrom.com for a rom for that phone and flash it via SP flashtool. When flashing a rom to a mtk phone with spflashtool the phone just needs to be turned off, no need to get into any mode ;
TimurAlaskara_TR said:
I had a clone s4 some time ago called No1 S6, after some time its internal sd card got broken... i do not recommend it to root and flash custom rom to that phones.
it had an mtk6582 which was a midrange SoC while that now its one of the crappiest chipsets..
however, clone mediatek phones do not have a "download mode", so odin does not work as well
You need to get the real name of the phone, i think there was a youtuber who reviewed a clone galaxy a9 his youtubechannel name was "mayiandjay" you could contact him via email for the devices name.
Then search on needrom.com for a rom for that phone and flash it via SP flashtool. When flashing a rom to a mtk phone with spflashtool the phone just needs to be turned off, no need to get into any mode ;
Click to expand...
Click to collapse
Thank very much sir for this, its a relief for me that there is still hope for my device. ill try this as soon as possible and i will immediately feedback you for any update.. again, thank you very, very, much sir and more power to you....
Staine777 said:
Thank very much sir for this, its a relief for me that there is still hope for my device. ill try this as soon as possible and i will immediately feedback you for any update.. again, thank you very, very, much sir and more power to you....
Click to expand...
Click to collapse
Instead of sayin thx just press the thx button at the right down corner of the post P
Defenetly let me know how it goes, there are also good videos about flashing a rom with spflasftool
Sir i found it.
Brand: Alps
Model: XS-A891
CPU Model: MT6580

Dead Note 3 Pro Helio X10

I bought a note 3 pro at the bay. The memer said he bricked it by an update. I tought no problem i repair it.
I´m stuck since one week. The Phone doesn´t make any life signs. Dead from the beginning. No fastboot. No edl. nothing.
I didn´t find any test points at the phone . I made myself a deep flash cable . But no reaction.
Any other tipps?
EDL only works on Qualcomm as far as I know. No idea how to revive a MTK based device
Amon_Re said:
EDL only works on Qualcomm as far as I know. No idea how to revive a MTK based device
Click to expand...
Click to collapse
thx for the answer. It doesn´t help, but know I know that I had no chance.
Maybe someone knows how to get the phone alive.
kevke74 said:
thx for the answer. It doesn´t help, but know I know that I had no chance.
Maybe someone knows how to get the phone alive.
Click to expand...
Click to collapse
You could give this a try, it's specific for that version of the phone:
[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Rom With SP Flash Tool On Redmi Note 3 (MTK)
Amon_Re said:
You could give this a try, it's specific for that version of the phone:
[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Rom With SP Flash Tool On Redmi Note 3 (MTK)
Click to expand...
Click to collapse
THX. I´ve tried this one already, but phone still isn´t recognized. That is the biggest problem of all.
kevke74 said:
THX. I´ve tried this one already, but phone still isn´t recognized. That is the biggest problem of all.
Click to expand...
Click to collapse
I think the motherboard is fried or emmc is dead or the cpu had some probs it can be anything if u want to buy a rn3 to for the snapdragon version and also buy it new it just costs 150$
Androbots said:
I think the motherboard is fried or emmc is dead or the cpu had some probs it can be anything if u want to buy a rn3 to for the snapdragon version and also buy it new it just costs 150$
Click to expand...
Click to collapse
It must be something like this. I tried everythind. A little bit frustrated, becuase I thought i could fix that with an little bit of effort, but I think, I lost it:crying:. Next time I´m buying a working one, not something to repair easily

Categories

Resources