Related
Hello all, I used the htc unlock method, but I am not able to flash a different radio version.
Does anyone know how to do that?
(Just booting into bootloader does not do the trick like it would normal unlock methods)
Thanks.
Anyone?
Sent from my PG86100 using XDA App
have you tried the commands
adb reboot bootloader
fastboot boot recovery.img
and flashing the radios from fastboot? or FlashimageGUI (which probably will not work for radios)
I have been wondering this myself. I have not heard of any methods that have come up to allow this recently. Same thing goes for splash images as I havent seen any method for those.
I have an idea of how it may be possible though. Perhaps someone else with a bit more knowledge can chime in to let us know if it is possible or not.
Anyhow.
Being officially unlocked I don't believe that ROOT is an issue like it is on an unofficial method. I know typically you would NOT accept an OTA to prevent the loss of ROOT. However, being an officially unlocked device, I am not sure if it matters.
I know that when I unlocked my device I had to manually unlock it, then I installed my recovery, then I simply flashed SU to it. My thought is that you can take the OTA. If the OTA doesn't work, you may have to re-lock the device, then run the OTA. But I believe the OTA would be safe. Once OTA completed, then flash your unlock token again, put recovery back on, then flash SU again.
Or I believe you could also wait for the new RUU instead of an OTA. Put on stock ROM, re-lock, run RUU, re-unlock, install recovery, flash SU.
The problem is that you may not be able to flash back to the previous radio once you are done.
Any thoughts on this?
UPDATE: I recently (like two minutes ago) learned that an RUU will not update a radio. I was under the impression that they did. Since it will not, I guess the RUU method will not work. Still curious about the OTA method though.
From the HTCDev Q and A:
HTCDev said:
Why is my security still on (S-On) after I have unlocked my bootloader?
Your device is shipped with Security on (S-ON) to protect your system software configuration (such as the bootloader, radio, boot, recovery, system and others). After you have unlocked the bootloader, however, you will have lifted the restrictions on boot, recovery and system. This means you can customize boot, recovery and system images on your phone as you desire. You can easily see that you have successfully unlocked the bootloader by looking at the top of the screen when entering the bootloader screen. Security is left on to protect things like the radio, and SIM lock.
Click to expand...
Click to collapse
yousefak said:
From the HTCDev Q and A:
Click to expand...
Click to collapse
Well, yeah. The S stays on to protect the radio.
But the S would be on regardless if you never rooted to begin with, but an OTA would allow the radio to update. So, my thought is that you can potentially take an OTA with the HTC unlock method and get the new radio.
If it were me, I would save my titanium file to my PC (just as a precaution), I would re-lock my device using fastboot oem lock, then I would run the RUU that matches my current software version. This would return me to stock/unrooted. At this point you should be able to accept an OTA. The OTA updates your radio/software/etc. Once you update, flash the unlock token again, then flash the superuser binary back onto the phone. Now, this would be contingent that HTC doesn't go back on their word and they dont push an OTA that prevents you from unlocking the phone.
Now, Ill admit I am not a developer, so I am not an expert, but it is my understanding that once it is unlocked putting root on the phone is pretty straight forward. You don't have to come up with a root method such as revolutionary, etc. It should simply allow Superuser because it is unlocked. If this is not the case, then Ill admit that my thought process is flawed. However, if it is the case, then why not return to stock, take an OTA, unlock, re-root, use titanium? Like I said, may not be able to return to previous radio, but why would you anyhow?
mildlydisturbed said:
have you tried the commands
adb reboot bootloader
fastboot boot recovery.img
and flashing the radios from fastboot?
Click to expand...
Click to collapse
Can someone tell me how exactly to accomplish the above?
I ran these commands and the it said "Installing update..." but the radio remains the same.
Thanks again.
I'm trying to return my HTC One back to being unrooted because I wanna update it and almost everywhere I read, you need to unroot to get over the air updates. So I got S-Off and I relocked my bootloader, but whenever I try running the RUU, it always fails. I tried flashing it and I tried running the exe file. Why does it keep failing? Also, is it true you can't get OTA updates while being rooted? The RUU I use is for Cingular (which from my understanding is the one AT&T uses) and I have Super CID. Lastly, if anyone knows an easier way to return my phone to being completely stock and unrooted that would be great. Thanks in advance!
Which RUU did you use? Apparently the last official one was JB 4.3 w/ Sense 5.0, ver. 3.17.502.3. The one for KK4.4.2 w/ Sense 5.0, ver. 4.18.502.7 was apparently not actually released by ATT and many people were having problems with it.
clsA said:
Well near as I can tell the RUU did not originate from HTC, someone was able to create it and sign it same as HTC would. But the files behave differently than the "Real" HTC RUU. The only solution I found was to use the True HTC RUU from 3.xx.502.x and OTA to 4.xx.502.x to 5.xx.502.x. It requires s-off to flash the OTA's so it's not the perfect solution for everyone.
Click to expand...
Click to collapse
So if you tried with the KK4.4.2 RUU, download the JB4.3 RUU from http://www.htc1guru.com/. Since you're S-OFF, you can use either the .exe or the decrypted .zip. I used the decrypted .zip before and it worked fine. Once you get that flashed you can then take the OTAs to update to KK4.4.2 w/ Sense 6. You'll need to be on the AT&T network to get those OTA. Otherwise you'll need to manually flash the updates, as clsA states in his post that I quoted above.
As for not getting OTAs while being rooted....
It's not so much that being rooted prevents getting OTAs. It's the process of getting to root that modifies or deletes system files that need to be intact for the OTA to work. OTA need to be installed through stock recovery. If you're rooted, it's most likely that you have a custom recovery. Also, unlocking the bootloader deletes some files the OTA checks for. If those files not there, the OTA will not install.
Flashing an RUU is the easiest way to get completely stock. It resets the phone to an out-of-the-box state. Whereas a factory reset done from bootloader or recovery basically just wipes the data partition, which will remove any apps you installed and user data. But any modifications to the system partition that are done remain. You don't get back the files that are deleted when you unlocked the bootloader.
Also, since you are S-OFF, there's no need to relock your bootloader to run an RUU. That's only required if you're S-ON. And once you get S-OFF, there is no reason to go back to S-ON.
Since I just want to get the new OTA update, do you recommend I just flash the update as opposed to going back to stock recovery because I don't mind having a rooted phone? Also, my phones camera suddenly became blurry, is it possible that the rooting had something to do with it? If it did, would flashing the OTA update fix it or would I need to go back to stock recovery or would neither fix it? Sorry for so many questions.
First off, what version is currently on your phone? Depending on where you're currently at you may need to flash more than one update in order to get it to the latest version. And no matter what, you'll need to flash stock recovery in order for the updates to flash. OTA updates, whether taken OTA or flashed manually, require stock recovery, as I mentioned before. Also, again as I mentioned before, the process of rooting your phone (more specifically, the process of unlocking your bootloader) most likely deleted files from your system partition that need to be in place in order for the OTA updates to install. If they are not there, the update will fail. So to answer your question...No, I don't recommend "just flash the update as opposed to going back to stock recovery". It won't work.
Since you didn't answer my question and state which RUU you tried, I don't know if you tried a bad 4.4.2 RUU or if there are other issues with your device and/or computer that's preventing any RUU from installing. If you just don't want to flash the RUU, then you can try flashing the update in the phone's current state and when it fails, you can analyze the error report, try to track down stock versions of the files you're missing and restore them if you find them, then try the update again, hoping you found everything. That's a lot more of a hassle than just flashing the RUU, flashing the updates, rooting, and setting up your phone.
Another option is to just flash a custom ROM. Most of them will bring the phone up to the latest version. Some will even take it higher than what is officially available from AT&T.
As for your camera problem, can't see how just rooting would cause that, but maybe it did. Without knowing the cause of the issue, I can't say if just flashing the OTA would fix it. If it's a software issue, then possibly it would. If it's a hardware issue, then probably not. Focus on updating the phone and worry about the camera issue if it still persists once updated.
Sorry, I forgot about your question. First of all, I got it working using RUU Zip M7 UL JB43 SENSE50 MR Cingular US 3.17.502.3-decrypted. The one that didn't work for me is RUU Zip M7 UL JB 50 Cingular - 1.26.502.12. Second, I am running 4.4.2. Thats for anyone who comes across this and was wondering. Thanks for your help sharksfan7. Also, in case you were wondering, my camera is still blurry, but I'll start a different thread for that.
FOUND THE RECOVERY (See below)
Right now my goal is to go back to stock to flash the OTA Update. I am running my nandroid back up I first made when which is the 4.4.4 w/ Software # 1.58.502.1. and right now I have TWRP as my recovery.
Also can someone confirm something for me. This nandroid I am running is rooted obviously and has SuperUser on it. If I go back to the stock recovery can I still do the OTA update even though SuperUser is there and the phone is unlocked?
Also in order to get the stock recovery back on the phone I need to use ABD and the windows command prompt method correct?
Thanks
found this link and was able to find the stock recovery finally. I clicked "Non-WWE- Recovery Images" Ten on the site it opens I clicked the more recoveries folder at the top and 1.58.502.1 was the first one.
http://forum.xda-developers.com/showthread.php?t=2701376
Now the only thing I need to know is if going back to stock recovery will allow me to update to OTA even though there is SuperUser on my device and even though I am rooted and unlock (S-on)
magicbumm328 said:
found this link and was able to find the stock recovery finally. I clicked "Non-WWE- Recovery Images" Ten on the site it opens I clicked the more recoveries folder at the top and 1.58.502.1 was the first one.
http://forum.xda-developers.com/showthread.php?t=2701376
Now the only thing I need to know is if going back to stock recovery will allow me to update to OTA even though there is SuperUser on my device and even though I am rooted and unlock (S-on)
Click to expand...
Click to collapse
As long as the ROM is stock (nothing modified by root) and stock recovery, you can update by OTA (root okay, unlocked bootloader okay).
Another option, just relock the bootloader and run the 4.4.4 RUU. It saves you from all the hassle (finding stock ROM and stock recovery), plus installing 2 OTAs. Only reason to do it the way you are, is to keep user data (RUU wipes phone) and it also saves you from having to relock.
redpoint73 said:
As long as the ROM is stock (nothing modified by root) and stock recovery, you can update by OTA (root okay, unlocked bootloader okay).
Another option, just relock the bootloader and run the 4.4.4 RUU. It saves you from all the hassle (finding stock ROM and stock recovery), plus installing 2 OTAs. Only reason to do it the way you are, is to keep user data (RUU wipes phone) and it also saves you from having to relock.
Click to expand...
Click to collapse
Well I do have the stock ROM. Idk if it having super user on it counts as being modified by root though? If not then its fine. And as mentioned I found the stock recovery as well.
The only reason I was looking to do it this way was because I do not really know what RUU is or how to do any of it. Idk how difficult it would be to relock the boot loader then figure out the RUU thing. Idk what the differences are between that and my phone being rooted as it is now are. I'll have to see if there is a thread that explains this RUU thing to me.
Thanks for the help and suggestion too btw
magicbumm328 said:
Well I do have the stock ROM. Idk if it having super user on it counts as being modified by root though? If not then its fine.
Click to expand...
Click to collapse
SuperUser is same as root, and is fine.
When I say "modifed by root" that often is when a user deletes "bloatware" they don't want, or adds apps, or modifies apps in the system partition.
If you didn't explicitly do any of those things, you should be fine. You will know this is the problem when you install the OTA, as the install will fail with the error message that the "system has been modified".
magicbumm328 said:
The only reason I was looking to do it this way was because I do not really know what RUU is or how to do any of it. Idk how difficult it would be to relock the boot loader then figure out the RUU thing. Idk what the differences are between that and my phone being rooted as it is now are. I'll have to see if there is a thread that explains this RUU thing to me.
Click to expand...
Click to collapse
RUU = ROM update utility
RUU is super easy, you don't really need much guidance to use it. LOCKED or RELOCKED bootloader is required to run it (UNLOCKED if okay if you have s-off). PC required, and the RUU will wipe the phone (so backup any personal data you want to keep, into your PC, cloud, etc.). Aside from those points, RUU is a self-explanatory executable (.exe) program that runs from your PC, and simple to use.
Relocking the bootloader is accomplished easily with a single fastboot command (after connecting phone to PC and booting into fastboot mode): fastboot oem lock
This is also assuming you did the bootloader unlock yourself, and therefore have fastboot/adb setup on your computer.
Running the RUU itself (after relocking the bootloader) is very easy. Boot into OS (some folks have better success being booted into fastboot mode, but I think the RUU is designed to run when booted into OS), connect to PC, then just run the RUU executable on your PC. The RUU executable will then just guide you what you need to do. Its mostly automated, you just need to confirm a few dialogue screens, etc. The RUU will reboot the phone a couple times, install the needed files automatically, and that's really it.
However, since you seem confidant you already have a stock ROM and corresponding stock recovery, I suppose the RUU doesn't gain you too much. But if you hadn't done those steps already, it often saves folks the hassle of tracking down the right stock ROM and recovery for their CID and current firmware. RUU in my opinion is a cleaner install, as it installs a complete stock image (not just updating piecemeal, like an OTA often does).
Also, since OTAs typically need to be installed in sequence, you will probably need to OTA to 2.23 software, than another OTA to 3.42 software. As RUU is a complete image, it would get you to 3.42 software in one fell swoop.
One other thing to note, is that if you are for some reason not connected to AT&T's network (using another carrier, another country, etc.) you will not get any OTAs on the AT&T branded device. AT&T oddity here, most other version will still OTA, even when not connected to a specific carrier. In contrast the AT&T RUU is able to be downloaded and run by anyone with an internet connection and PC (regardless of country, carrier, etc.). I'm under the assumption that most folks on this forum section are on AT&T's network, although I know that some are not (you haven't stated either way).
RUU links are included on my Index thread under heading "RUUs": http://forum.xda-developers.com/showthread.php?t=2751432
Aside from wiping the phone (OTA keeps user data, but you may end up wiping anyway if you run into bugs after OTA), the other downside to RUU is that you need to relock the bootloader. Then you need to unlock the bootloader again (via the HTCDev.com site, or alternately sunshine) if you want to install custom recovery, install custom ROMs, root, etc.
So the choice is really yours (RUU versus OTA). I'm just giving it as an alternative.
Due to a bug, I have been able to get root on my OnePlus 2 running Oxygen 2.1.1 without a wipe.
DISCLAIMER: This may not give you root on yours, and obviously it may also loose you data, so don't do it unless you know you can cope with that. YMMV, but I've documented here for posterity how to do it!
I had unlocked the bootloader previously, because my device is an import, so it is possible, though unlikely that it simply doesn't wipe on an unlock after re-lock (OTA locks bootloader).
The basic steps are :
Encrypt your device
Unlock the bootloader (this won't wipe because of encryption!)
Boot TWRP
use adb to push SuperSu to your device and then flash it
Then you will have root. Step by step instructions below.
Note that TWRP currently doesn't support encryption on our devices, so you'll have to use something other than that to back up your data if you want to use a custom rom. This simply gives you rooted stock Oxygen.
After rooting :
Code:
$ adb shell
[email protected]:/ $ su
[email protected]:/ # id
uid=0(root) gid=0(root) context=u:r:init:s0
Step 1: Encrypt your device.
This is irritating but fairly simple. You have to have fully charged your device AND keep it plugged in, and it takes ~50 minutes to complete. It's the standard android encryption, so follow any guide for this, such as https://support.google.com/nexus/answer/2844831?hl=en-GB
Step 2: Unlock the bootloader.
Again, this is well documented - here's a guide : http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568 - The important thing is that if you're encrypted, this does not do a wipe, in my experience.
Step 3: Boot TWRP
Download TWRP from https://dl.twrp.me/oneplus2/ and save it somewhere you can find it later - I'm going to assume you're on linux and have saved it in ~/Downloads/TWRP.img
Reboot into bootloader mode (Power and Volume up) and start TWRP by issuing the following command (substituting your path to twrp) :
Code:
~$ fastboot boot Downloads/twrp-2.8.7.0-oneplus2.img
Step 4: Root it!
This is a bit tricky because once you're encrypted you can't access the SDCard, so you need a bit of magic to flash the zip.
First, do the swipe to enable modifications, then in mount, tick the /system option.
Then, on your PC, download SuperSU's .zip update from https://download.chainfire.eu/696/supersu/ (similar to above, assuming same download location) and use adb push to put it on the device in /tmp :
Code:
adb push Downloads/UPDATE-SuperSU-v2.46.zip /tmp/su.zip
Next, from the main TWRP menu, select Install. Navigate up (you start in sdcard that is empty) and into tmp, then select the su.zip file in there.
Swipe to install the zip - TWRP will complain because it can't access /data, but handily, /data is not needed to root!
Select Reboot, and viola, you have SuperSU and root! Now you can install Titanium Backup and back up your device.
Cool, perhaps renaming the title like "Unlock and root without wiping" could make more sense?
ranyardm said:
I had unlocked the bootloader previously, because my device is an import, so it is possible, though unlikely that it simply doesn't wipe on an unlock after re-lock (OTA locks bootloader).
Click to expand...
Click to collapse
OTAs don't re-lock the bootloader though...
If you've unlocked it previously, it'll stay unlocked unless you boot into fastboot mode and do a "fastboot oem lock".
Spannaa said:
OTAs don't re-lock the bootloader though...
If you've unlocked it previously, it'll stay unlocked unless you boot into fastboot mode and do a "fastboot oem lock".
Click to expand...
Click to collapse
Not true I'm afraid. The OP2 OTA to 2.1.0 did indeed relock the bootloader. I know this because I would never want to lock the bootloader, and I'm on a Chinese OP2 which came with masses of spyware, so to install clean 2.0.1 I had to unlock the bootloader originally (they managed to get the spyware into the recovery image!). Anyway, it's irrelevant to this thread how the bootloader got relocked, I just documented this fiddly way of getting an unlocked bootloader with root on a locked OP2.
ranyardm said:
Not true I'm afraid. The OP2 OTA to 2.1.0 did indeed relock the bootloader. I know this because I would never want to lock the bootloader, and I'm on a Chinese OP2 which came with masses of spyware, so to install clean 2.0.1 I had to unlock the bootloader originally (they managed to get the spyware into the recovery image!). Anyway, it's irrelevant to this thread how the bootloader got relocked, I just documented this fiddly way of getting an unlocked bootloader with root on a locked OP2.
Click to expand...
Click to collapse
Maybe my post should have said "OTAs don't re-lock the bootloader since 2.1.0"
Anyway, if your method works then great :good:
There's another way to do it here.
Can everyone who's done this attest that the data indeed doesn't get wiped?
cheekrox said:
Can everyone who's done this attest that the data indeed doesn't get wiped?
Click to expand...
Click to collapse
I'd also be very happy to have this confirmed by another party!
Confirmed. Data does NOT get wiped.
cheekrox said:
Confirmed. Data does NOT get wiped.
Click to expand...
Click to collapse
Confirmed on 2.2.0 or still on 2.1.X?
Can confirm, this still works on 2.2.0.
i didnt try this tutorial, but when i rooted my phone, my data didnt got wiped either.
will root on 6p running android n dev preview wipe phone?
Any chance this works also on 1+1? I'm desperate for a way to root without unlocking so I can install titanium/nandroid and do a full proper backup before wiping clean (battery life is utter crap). Running latest stock 6.01 COS. Never unlocked, never wiped since 15R.
Thanks!
anyone tried this on OOS 3 ?
Yeah, bump!
Now my OP2 is on Oxygen 3.0.2, and Android 6.0.1 - stock.
My phone had always been (bootloader) unlocked and rooted, since the day after I got it.
But to get the new OTA update to Oxygen 3, I tried a different method this time, where some people said you can do a temporary un-root, get the stock OTA update, and then re-root.
I followed their instructions, but I can't re-root as simple and easy as they said.
Before the process, I didn't do a nandroid backup because my sdcard doesn't have room :-|
So now I need to re-root without losing data.
And I've tried helium before, many times, and it never works for me.
Any other ideas, or has anyone tried this encryption trick yet with Oxygen 3?
Thanks!
tried it on oos 3.1:
everything worked until a bootloop at the last restart.
also twrp asked me to unlock the phone, i did that.
what to do now?
Did anyone ever have any success with this approach on 3.1?
LoL How do you boot/flash TWRP on locked bootloader?
aIecxs said:
LoL How do you boot/flash TWRP on locked bootloader?
Click to expand...
Click to collapse
Lol, you can't.
Software up to date issue
HI all, just got this M8 and it is an ATT Version. but I believe it is unlocked because I am using it with cricket.
When trying to update Android Tells me software is up to date ?
Android version 5.0.2
HTC Sense Version 6.0
Software Number 4.28.502.1
HTC SDK API Level
I am pretty sure that ATT has updated to Marshmallow by now / So why can't I update? I am on wifi and 4G/LTE Could it be because I am using a Cricket Sim Card in the Phone ?
I have downloaded the RUU for Marshmallow software version 6.20.502.5. Should I continue with the Manual update ?
I believe this phone was originally purchased from ATT on May of 2016 if it makes any difference , figured I post it. since it could be a newer version of HTC M8.
Also is there a way to back up my current stock rom, without Rooting phone ? Thanks for all your help.
As I cannot root my phone, because when I go into developer option and search for S-off That option is not there and I can't Continue.
My responses below in red font:
ELEVO said:
HI all, just got this M8 and it is an ATT Version. but I believe it is unlocked because I am using it with cricket.
When trying to update Android Tells me software is up to date ?
I am pretty sure that ATT has updated to Marshmallow by now / So why can't I update? I am on wifi and 4G/LTE Could it be because I am using a Cricket Sim Card in the Phone ?
That is correct, the AT&t version (and most US versions) can only OTA update if connected to the proper branded carrier (AT&T in this case). Therefore, the RUU is your best option to update.
I have downloaded the RUU for Marshmallow software version 6.20.502.5. Should I continue with the Manual update ?
You can. But you need to flash the 6.20.502.5 firmware first, before you can flash the RUU. See instructions to flash the firmware here: https://forum.xda-developers.com/showpost.php?p=67123738&postcount=7
Then run the RUU. Keep in mind, that RUU will wipe the phone. So backup your data to an off-phone location (cloud, computer, etc.) before RUU.
Also is there a way to back up my current stock rom, without Rooting phone ? The current Lollipop ROM? No, there will be no way to revert to LP by official means, once you RUU to Marshmallow. I doubt you will find the need or desire to "downgrade" to obsolete LP version. If for some reason you did want to, there are options, but would require unlocking the bootloader (to install custom recovery and flash a Lollipop ROM), or s-off (which would allow you to "downgrade" by RUU - which is not allowed with s-on).
As I cannot root my phone, because when I go into developer option and search for S-off That option is not there and I can't Continue.
You are misunderstanding a couple things:
1) s-off is not a setting in Developer Options. s-off can only be obtained with sunshine app ($25)
2) You don't need s-off to root this device. Simply unlock the bootloader, install TWRP, and flash SuperSU to root
Click to expand...
Click to collapse
Detailed
redpoint73 said:
My responses below in red font:
Click to expand...
Click to collapse
Thanks for the detailed reply, really helpful and greatly appreciated :good:
Two more Questions, Can I upgrade to an official DEV Edition RUU on this ATT Device? or would I have to use a Custom Dev ROM ? as I am trying to Tether with my phone, just like my official Developer HTC M8 I purchased in 2014 , Seems AT&T phone wont allow me to Tether ?
Also once I flash firmware and upgrade to official RUU will need to Unlock and Root Loader? Will doing upgrading to official Marshmallow Relock bootloader and Un Root Phone ? Back to Stock ? Thanks again, I will be attempting this pretty soon. Thanks again
For the Record, I have made a back up of my Lollipop via TWRK. I also backed it up using Titanium back up, just in case.
Again, my responses in red font:
ELEVO said:
Thanks for the detailed reply, really helpful and greatly appreciated :good:
You're welcome. Always happy to help!
Two more Questions, Can I upgrade to an official DEV Edition RUU on this ATT Device?
You can't flash the Dev Edition RUU with s-on. Even though the versions are very similar (same model ID - MID) the two versions have different carrier ID (CID). Wrong carrier ID will make the Dev Ed RUU fail, by definition. And the only way to change CID is with s-off. Further, its not really necessary to flash the Dev Ed RUU (and not worth spending money of s-off) to accomplish what you want (see more below)
or would I have to use a Custom Dev ROM ? as I am trying to Tether with my phone, just like my official Developer HTC M8 I purchased in 2014 , Seems AT&T phone wont allow me to Tether ?
Its correct that the AT&T stock ROM disables tethering. Flashing most custom ROMs (or the Dev Ed ROM) will enable tethering - as well as remove annoying AT&T branding and bloat apps. Flashing the Dev Ed RUU is not necessary to accomplish this.
Also once I flash firmware and upgrade to official RUU will need to Unlock and Root Loader? Will doing upgrading to official Marshmallow Relock bootloader and Un Root Phone ? Back to Stock ? Thanks again, I will be attempting this pretty soon. Thanks again
You need to relock the bootloader in order to flash firmware and RUU (command: fastboot oem lock). Once the RUU is complete, the phone will be on a fully stock "factory" image. So you will be unrooted. You will also be back to stock recovery (no longer have TWRP installed). From there, what you want to do:
1) Unlock the bootloader again. Either use the same unlock bin code you used to unlock BL before. Or get a new code from HTCDev.com
2) Flash TWRP back to the phone with fastboot. TWRP 3.0.2 is recommended for compatibility with MM firmware.
3) Flash the desired custom ROM. The custom ROM will be rooted (if you flash the Dev Ed ROM, you can select root in the AROMA installer).
For the Record, I have made a back up of my Lollipop via TWRK. I also backed it up using Titanium back up, just in case.
Always good to make backups. Although be aware, that RUU will wipe the phone, including internal storage. So if you picked internal storage as your backup location, you'll want to move/copy to another location (removable SD is okay, otherwise to computer or cloud).
Also note that restoring app data (as well as call logs, SMS) using Titanium, after RUU or ROM flash should be okay. But don't restore any system data, as this can cause problems.
Click to expand...
Click to collapse
redpoint73 said:
Again, my responses in red font:
Click to expand...
Click to collapse
Ok i came back to this old post. I forgot all about it, it really is helping me alot.
My questioin is after i Relock the bootloader can i do a factory wipe? will this remove everything from my phone and bring it back to stock?
I relocked my phone, but all my apps and contacts are their.
Bricked ?
ELEVO said:
Ok i came back to this old post. I forgot all about it, it really is helping me alot.
My questioin is after i Relock the bootloader can i do a factory wipe? will this remove everything from my phone and bring it back to stock?
I relocked my phone, but all my apps and contacts are their.
Click to expand...
Click to collapse
I think i may have bricked my phone? I went and installed an RUU firmware file for Marshmallow as most instruct to do via Fastboot. All went well, installation completed and i was able to send command to phone to reboot. when it tried to reboot. white screen with HTC Comes on and then goes almost black with a very light dark grey background.
Phone would not reboot into anything but dark screen. even when i restarted it with power button. the only thing that worked for me, was Holding Down Power/Volume and quickly hit the volume down button before device would vibrate to reboot, that took me into recovery. Below is what i see in Recovery.
Phone now has new software
***RELOCKED***
m8_UL_CA PVT SHIP S-ON
HBOOT-3.1.0.0000
RADIO-4.0 [email protected]
OpenDSP-V56.2.2-00593-M8974_FO.0126
0S-6.20.502.5
eMMC-boot 2048MB
APR 14 2016,19:39:46.0
HBOOT
<Vol UP> to previous item
<Vol Down> to next item
<Power> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
CHECK SMARTSD
IMAGE CRC
SHOW BARCODE
I was able to run and "IMAGE CRC" via boot loader. it gave me alot of numbers after calculating. not sure if that is a good sign ?
Things I've tried in Recovery.
1. Recovery goes back to black screen.
2. SHOW BARCODE Works- 3 bar codes showed up.
3. Fastboot works. but when i try command "adb devices" it says list of devices attached. but nothing shows up
4. Tried to do a factory reset and tries to do it, then a black phone pops up on screen with green arrow sgoing in circles for like 10 seconds. then reboots to dark screen.
Please Help :crying: Thanks
Can anyone help me with this? I bought the phone with me on vacation and now using an HTC Developer Edition that the button down doesn't work and Volume down button us sunk in But at least i have my phone with all my contacts and apps , For now ?
I would like to know if i can unbrick my other HTC . Thanks.
Late in responding, as I was on work travel myself, and not on XDA for over a week.
ELEVO said:
I think i may have bricked my phone?
Click to expand...
Click to collapse
It's basically impossible for you to do anything with an s-on M8 that will actually brick it. That is the good thing about s-on.
ELEVO said:
I went and installed an RUU firmware file for Marshmallow as most instruct to do via Fastboot. All went well, installation completed and i was able to send command to phone to reboot. when it tried to reboot. white screen with HTC Comes on and then goes almost black with a very light dark grey background.
Click to expand...
Click to collapse
I think you only flashed the firmware.zip and not the RUU. Based on the condition here, and your other thread you created here: https://forum.xda-developers.com/htc-one-m8/help/htc-one-e-m8-fastboot-issues-t3757628
I clearly described above to flash the firmware.zip then the RUU. They are 2 completely different things. Firmware is about 80 MB and only contains hboot, radio, and a few other things. RUU is a full image that is 1.5 GB.
No boot after flashing signed firmware is normal, as it expects the RUU to be run afterwards.
ELEVO said:
Fastboot works. but when i try command "adb devices" it says list of devices attached. but nothing shows up
Click to expand...
Click to collapse
adb doesn't work in fastboot mode. Only fastboot commands will work in fastboot mode. You can only use adb when booted to OS (not an option for you, obviously) or alternately in custom recovery TWRP. So what you describe (adb not working) is normal and expected.
However, fastboot is enough to get the phone working from the described condition.