Question Moto G Pure - XT2163-4 vs XT2163-2 - LTE bands - Moto G Play (2021)

New here. Didn't see a forum for the Moto G Pure XT2163. Mods - I am sorry. Please move wherever's best.
Discovered that the version Verizon is selling (notably the slickdeals thread on the one from Visible) is different. It's -2 vs. -4.
Looks like VZW disabled most of the bands that T-Mobile/Sprint use - 25, 41, 71, for example.
Looking to see if it's possible to enable those bands. One report on SD thread says they bricked their device trying RETUS version but IDK if the bootloader needs to be unlocked first, or if it would even help. Probably more work to unlock these bands if it's even possible.
Downloads look available here https://mirrors.lolinet.com/firmware/moto/ellis/official/
Haven't messed with flashing a phone in years. May be able to try later but hoping anyone else here can look into this.

I'm going to guess as is the case with most other Android devices branded by Verizon that the bootloader will be restricted from being unlocked. There is really no way around this as it's an OEM based policy. If you want to play with custom ROMs or root based modding, I would highly recommend ditching the Verizon or any other carrier branded variant with the exception of T-Mobile/Metro and Google Fi (there are others) that actually allow OEM unlock. Not only that, but if you're looking for certain connectivity bands, you don't want to settle for a carrier device variant designed to use a particular set of bands which don't include the ones you need. No sense getting a Verizon variant to run on T-Mobile/Sprint bands when you can, you know, get the T-Mobile variant in the first place. Get the global unlocked variant model if you can and start from there. Far easier than the headaches you'll get trying to transform VZW to TMUS.

Cross-flashing is not going to unlock bands, you need to change modem configuration. Throw your SoC(Mediatek) followed by "unlock bands" into Google and see if you have any luck.

I also didn't see a forum for the Moto G Pure and was wondering if anyone knows of a custom bootloader like TWRP or CWM for it? I think I have enough understanding of how to sideload the app, I just need something to send the phone. I tried using a random TWRP mod on it but it fails, invalid signature. I haven't tried doing the phone rooting thing in years now, but I have this Moto G Pure phone without any service on it that I'm willing to experiment on. It can be used as a test bed or data extraction device to put code from it on the internet if someone needs it to help custom rom makers for example by testing stuff on it. Perhaps that's why no one has a custom recovery for it yet.
I don't know exactly how to extract the phones current ROM data so all I've done so far is unlock the bootloader. The phone's carrier based on the unactivated sim card shows it's a T-Mobile branded device, but the T-Mobile and other carrier software is inactive other than the few Moto apps. An article on XDA say's the phone's suck, but that's just not true at least not to me. It's a fine phone like it is, but if I can format it's SSD and only install what I want it to have on it that would be great. It's just a spare sim locked phone that I can't use my active sim card in. So with that it's now a project phone. I would like to mainly just unbloat it and free up all that used space occupied by the recovery partition. I don't necessarily need a whole new ROM, just want to root it. That's the only way to erase those factory files that I know of.
For me unlocking the bootloader wasn't to hard to do. You have to make sure the drivers from Motorola are installed and have a current version of ADB available on a computer. I still had a version of ADB tools that was almost a decade old now so I had to update that for the fastboot oem_unlock_unlockcode (automated code from Motorola support) command to work. To find out if it can be unlocked or not go here:
https://motorola-global-portal.custhelp.com/app/standalone%2Fbootloader%2Funlock-your-device-b
At the Moto site they will guide you on how to generate the code they want you to send them. You have to sign in to their site to use that function though. After I finally figured out what to type in the CMD window it generated that code and I edited it down to one long line of numbers and give it to the page. In seconds I had an email with the unlock code inside.
Unlocking it seems to help with uninstalling some of the built in stuff, before I could only disable most of the apps that come with it. The apps are still probably on there I just have to factory reset it and they'll come back. Now however the removed apps don't show as using any internal storage, all the apps info numbers go to 0 bytes, but still even doing that it's still over 10GB of unmovable data. When it should really be more like 2-3 GB for the entire system. I hate how Google just inserts itself in your life even when you don't want it at all.
I anyone passing by reading this post needs more details please let me know and I'll try to get the information or even data files from the phone. Would a copy of it's stock firmware be of any help? If so let me know how I would go about saving a copy of it. I'll keep looking for answers but it seems this phone is not high on the priority list or is new or something. So there is only scam guides trying to tell you "How to unlock your phone" or "Install TWRP on Motorola devices" and other clearly click bait sites. I can't even find the stock rom for it on Motorola's site, just outdated versions from 2016, with different build numbers, that can't be right.
All I know is unlocking the bootloader was the first step on all the guides and I've done that. Got a warranty voided notice and everything. There currently isn't a custom recovery mod for this model as far I can tell. If I can ever find that then I can try Linage or just debloat Android 11 which is probably the safer and easier option provided I can find that Custom Covery'.
When it boots up now, it has to tell me it's unlocked and all the dangers it poses. Dangerous if you cared about what was on it I suppose. There is nothing on it I can't just copy back over to it, other than the stock operating system.
Oh yeah, it's model number and other side of the box information is:
Model Name: Moto G PURE
SKU: MO-XT21634-AJB (MOXT21634AJB)
Software Version RRH31.Q3-46-20
Production date was 12/15/2021
I'm not sure what other information to include.

BrittonCBurton said:
I also didn't see a forum for the Moto G Pure and was wondering if anyone knows of a custom bootloader like TWRP or CWM for it? I think I have enough understanding of how to sideload the app, I just need something to send the phone. I tried using a random TWRP mod on it but it fails, invalid signature. I haven't tried doing the phone rooting thing in years now, but I have this Moto G Pure phone without any service on it that I'm willing to experiment on. It can be used as a test bed or data extraction device to put code from it on the internet if someone needs it to help custom rom makers for example by testing stuff on it. Perhaps that's why no one has a custom recovery for it yet.
I don't know exactly how to extract the phones current ROM data so all I've done so far is unlock the bootloader. The phone's carrier based on the unactivated sim card shows it's a T-Mobile branded device, but the T-Mobile and other carrier software is inactive other than the few Moto apps. An article on XDA say's the phone's suck, but that's just not true at least not to me. It's a fine phone like it is, but if I can format it's SSD and only install what I want it to have on it that would be great. It's just a spare sim locked phone that I can't use my active sim card in. So with that it's now a project phone. I would like to mainly just unbloat it and free up all that used space occupied by the recovery partition. I don't necessarily need a whole new ROM, just want to root it. That's the only way to erase those factory files that I know of.
For me unlocking the bootloader wasn't to hard to do. You have to make sure the drivers from Motorola are installed and have a current version of ADB available on a computer. I still had a version of ADB tools that was almost a decade old now so I had to update that for the fastboot oem_unlock_unlockcode (automated code from Motorola support) command to work. To find out if it can be unlocked or not go here:
https://motorola-global-portal.custhelp.com/app/standalone%2Fbootloader%2Funlock-your-device-b
At the Moto site they will guide you on how to generate the code they want you to send them. You have to sign in to their site to use that function though. After I finally figured out what to type in the CMD window it generated that code and I edited it down to one long line of numbers and give it to the page. In seconds I had an email with the unlock code inside.
Unlocking it seems to help with uninstalling some of the built in stuff, before I could only disable most of the apps that come with it. The apps are still probably on there I just have to factory reset it and they'll come back. Now however the removed apps don't show as using any internal storage, all the apps info numbers go to 0 bytes, but still even doing that it's still over 10GB of unmovable data. When it should really be more like 2-3 GB for the entire system. I hate how Google just inserts itself in your life even when you don't want it at all.
I anyone passing by reading this post needs more details please let me know and I'll try to get the information or even data files from the phone. Would a copy of it's stock firmware be of any help? If so let me know how I would go about saving a copy of it. I'll keep looking for answers but it seems this phone is not high on the priority list or is new or something. So there is only scam guides trying to tell you "How to unlock your phone" or "Install TWRP on Motorola devices" and other clearly click bait sites. I can't even find the stock rom for it on Motorola's site, just outdated versions from 2016, with different build numbers, that can't be right.
All I know is unlocking the bootloader was the first step on all the guides and I've done that. Got a warranty voided notice and everything. There currently isn't a custom recovery mod for this model as far I can tell. If I can ever find that then I can try Linage or just debloat Android 11 which is probably the safer and easier option provided I can find that Custom Covery'.
When it boots up now, it has to tell me it's unlocked and all the dangers it poses. Dangerous if you cared about what was on it I suppose. There is nothing on it I can't just copy back over to it, other than the stock operating system.
Oh yeah, it's model number and other side of the box information is:
Model Name: Moto G PURE
SKU: MO-XT21634-AJB (MOXT21634AJB)
Software Version RRH31.Q3-46-20
Production date was 12/15/2021
I'm not sure what other information to include.
Click to expand...
Click to collapse
hey i just came up on one of these today, nice phone considering... Any luck with trying to find a custom recovery? I have been looking as well but development seems pretty sparse right now. I am in the same boat as you, unlocked bootloader, locked everything else lol. I cant even find a way to root it without TWRP! I am curious if one of the other moto G series phones would have the same TWRP? Also check this out. It sounds legit but IDK...https://www.getdroidtips.com/root-motorola-g-pure-xt2163/

Agent_Orange1488 said:
hey i just came up on one of these today, nice phone considering... Any luck with trying to find a custom recovery? I have been looking as well but development seems pretty sparse right now. I am in the same boat as you, unlocked bootloader, locked everything else lol. I cant even find a way to root it without TWRP! I am curious if one of the other moto G series phones would have the same TWRP? Also check this out. It sounds legit but IDK...https://www.getdroidtips.com/root-motorola-g-pure-xt2163/
Click to expand...
Click to collapse
Well I was able to use Magisk to "root" it with the patched boot file trick, but still that's not the same thing as I did before with a Samsung phone and the CWM recovery deal. That gave the user all the control they wanted. Even though the phone claims I have root access, I'm not sure what to do with Magisk's root trick. I still don't see a way to backup or install a different operating system or just a blank Android 11 OS. My knowledge there is limited and there isn't a custom recovery for this model as far as I can tell.
So I still can't wipe the drive or remove the OEM partition that contains the installers for the bundled stuff. I'd still need some form of interface that has more features than the stock Fastboot and Bootloader modes offer I guess, or I just don't know how to use the software tools correctly. It's still locked even with root as far as I can tell but if there is something more I'm missing or an additional app to install for example, like SU. Is that still a thing? If I'm on the right track let me know.

BrittonCBurton said:
Well I was able to use Magisk to "root" it with the patched boot file trick, but still that's not the same thing as I did before with a Samsung phone and the CWM recovery deal. That gave the user all the control they wanted. Even though the phone claims I have root access, I'm not sure what to do with Magisk's root trick. I still don't see a way to backup or install a different operating system or just a blank Android 11 OS. My knowledge there is limited and there isn't a custom recovery for this model as far as I can tell.
So I still can't wipe the drive or remove the OEM partition that contains the installers for the bundled stuff. I'd still need some form of interface that has more features than the stock Fastboot and Bootloader modes offer I guess, or I just don't know how to use the software tools correctly. It's still locked even with root as far as I can tell but if there is something more I'm missing or an additional app to install for example, like SU. Is that still a thing? If I'm on the right track let me know.
Click to expand...
Click to collapse
Thanks for the reply!!! I am speaking from a place of semi-ignorance here but I would thing that you could install SuperSU from inside the system, right? As long as the root binary is there...idk though and from what I hear, chainfire is not responsible for SuperSU anymore so it has become somewhat sketchy. I saw a post (about this phone, I think) that mentioned having to install terminal emulator and running root command from there to achieve legit root after flashing the patched boot.img. I will see if I can find the post again and update you. Is there anyway you could post the boot.img? Or give me a link for it?

Agent_Orange1488 said:
Thanks for the reply!!! I am speaking from a place of semi-ignorance here but I would thing that you could install SuperSU from inside the system, right? As long as the root binary is there...idk though and from what I hear, chainfire is not responsible for SuperSU anymore so it has become somewhat sketchy. I saw a post (about this phone, I think) that mentioned having to install terminal emulator and running root command from there to achieve legit root after flashing the patched boot.img. I will see if I can find the post again and update you. Is there anyway you could post the boot.img? Or give me a link for it?
Click to expand...
Click to collapse
Well I can try and learn how to extract the phones information to my computer. I don't know how to do that exactly. The way I was able to get a hold of the phones stock firmware data was by using Lenovo's Smart Rescue and Recovery software.
You have to enable usb debugging mode, attach the phone to the computer with the software running and make sure that you didn't disable/delete Device Help. That app is what makes the Lenovo software work, otherwise the Recovery software fails to see the phone. If it sees the phone correctly then you can see the preselected target firmware it wants you to download under the Rescue tab along the top.
So I did that and grabbed the files it created without actually applying them to the device. The whole thing is a little over 2GB and difficult to host but I put the stock boot.img file here for anyone who needs it. If anyone wants all the files I can try to upload the whole thing one file at at time. That's the way it was sent to me, an uncompressed folder. If I zip it all up and try to upload it most sites will say file size exceeded. Anyway here's the link...
boot
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

Thanks I was able to patch it with Magisk and achieve root. It looks like Magisk is an SU manager anyway. I have never used it before so this is a first for me. The root and bootloader unlock seem a little pointless without any recovery or ROM though....I guess it's time to learn how to compile one lol

I just picked up the Moto G Pure (XT2163-4) Android 11 aka Red Velvet Cake *sounds yummy lol*....I've been searching around and not seen any info about any rooting method for this device....besides the "Root All Motorola Phones" crap...and I don't feel like risking making a paper weight with it. Even on here it doesn't show up in the...add device list....was going to add to my profile...but can't.

Agent_Orange1488 said:
Thanks I was able to patch it with Magisk and achieve root. It looks like Magisk is an SU manager anyway. I have never used it before so this is a first for me. The root and bootloader unlock seem a little pointless without any recovery or ROM though....I guess it's time to learn how to compile one lol
Click to expand...
Click to collapse
Yeah now we're on the same page then. I thought the same thing, not much use to have an unlocked boot loader and root access without software to make use of it. I gave the phone to my nieces to play with for now, but it's with in arms reach if I need it for instructions yet to be defined. I should receive updates to this post if anyone else responds.

Gamekeeper408 said:
I just picked up the Moto G Pure (XT2163-4) Android 11 aka Red Velvet Cake *sounds yummy lol*....I've been searching around and not seen any info about any rooting method for this device....besides the "Root All Motorola Phones" crap...and I don't feel like risking making a paper weight with it. Even on here it doesn't show up in the...add device list....was going to add to my profile...but can't.
Click to expand...
Click to collapse
Yeah appears it was produced in late 2021 or sold at that time so it's new and no one has made any custom firmware's or recoveries for it as far as I know. I don't know how to do that, requires computer programming skills. I don't have any of those.

Gamekeeper408 said:
I just picked up the Moto G Pure (XT2163-4) Android 11 aka Red Velvet Cake *sounds yummy lol*....I've been searching around and not seen any info about any rooting method for this device....besides the "Root All Motorola Phones" crap...and I don't feel like risking making a paper weight with it. Even on here it doesn't show up in the...add device list....was going to add to my profile...but can't.
Click to expand...
Click to collapse
I feel your pain! Had mine a few days and of course came to XDA immediately to find the DL on this joint but no luck... Ya I definitely don't recommend one click root method for this. If you want, I can post/link the patched boot.img i made with magisk. Mine boots with it and have confirmed root.

BrittonCBurton said:
Yeah now we're on the same page then. I thought the same thing, not much use to have an unlocked boot loader and root access without software to make use of it. I gave the phone to my nieces to play with for now, but it's with in arms reach if I need it for instructions yet to be defined. I should receive updates to this post if anyone else responds.
Click to expand...
Click to collapse
Excellent, it's nice to be caught up with everyone else haha!! I am going to do some digging and posting and whatnot to try to find some info on porting a recovery for this model. I feel like it can't be too different from at least one or two of the other G series phones. I will see updates as well so please post if you come up with anything!!
BTW does anyone know the process of creating a device page for this joint?! I think this phone is definitely worth some development...

Agent_Orange1488 said:
Excellent, it's nice to be caught up with everyone else haha!! I am going to do some digging and posting and whatnot to try to find some info on porting a recovery for this model. I feel like it can't be too different from at least one or two of the other G series phones. I will see updates as well so please post if you come up with anything!!
BTW does anyone know the process of creating a device page for this joint?! I think this phone is definitely worth some development...
Click to expand...
Click to collapse
Good luck finding anything that will load onto the phone. Seems like it would be possible to install LineageOS on it if nothing else. You'd think by now installing a phone's operating system would be similar to how operating systems are installed on other computers. All I get is invalid signature, way to much security (for them) on phone OS'es. With phones and PDA's apparently you can't just find the OS you want to use and install it. Where's the generic and bloat free Andriod 11 stock OS/firmware at? No such thing? It's either "Gaggles" way or nothing apparently. (It's ok if you don't know either, maybe someone else has more information about that.)

BrittonCBurton said:
Good luck finding anything that will load onto the phone. Seems like it would be possible to install LineageOS on it if nothing else. You'd think by now installing a phone's operating system would be similar to how operating systems are installed on other computers. All I get is invalid signature, way to much security (for them) on phone OS'es. With phones and PDA's apparently you can't just find the OS you want to use and install it. Where's the generic and bloat free Andriod 11 stock OS/firmware at? No such thing? It's either "Gaggles" way or nothing apparently. (It's ok if you don't know either, maybe someone else has more information about that.)
Click to expand...
Click to collapse
Ya I'm definitely not going to try anything on the actual device, (ESPECIALLY if I am trying to put it together myself) but I am pretty sure you can test that stuff on a virtual system. Some kind of android emulator or whatever. As for a stock/debloated/de-odexed ROM, I haven't seen one but that couldn't be all that difficult to put together, right? I mean as long as the patched boot.img is included anyway. I feel like a recovery would be a higher priority though...? BTW, I have never used Lineage before, how is it?

Agent_Orange1488 said:
I feel your pain! Had mine a few days and of course came to XDA immediately to find the DL on this joint but no luck... Ya I definitely don't recommend one click root method for this. If you want, I can post/link the patched boot.img i made with magisk. Mine boots with it and have confirmed root.
Click to expand...
Click to collapse
That would be great if you could share that patched boot.img......it is for the XT2163-4 MOTO G PURE correct?

Gamekeeper408 said:
That would be great if you could share that patched boot.img......it is for the XT2163-4 MOTO G PURE correct?
Click to expand...
Click to collapse
Agent_Orange1488 said:
I feel your pain! Had mine a few days and of course came to XDA immediately to find the DL on this joint but no luck... Ya I definitely don't recommend one click root method for this. If you want, I can post/link the patched boot.img i made with magisk. Mine boots with it and have confirmed root.
Click to expand...
Click to collapse
I would also like the patched boot.img if it is for the XT2163-4. Thanks

Hey boys I actually got rid of the moto g pure...for now at least lol! GREAT phone and I would be willing to get it back once there is some dev work done on it...will definitely be watching the threads on it. Good luck boys!!!

Hi
I read the above posts, and it seems like even if I am able to root it using Magisk, I won't be able to flash it with custom rom?
Thank you Agent_Orange1488 for the posts.

Related

Stock Recovery Needed For ZTE Avail 2 (Z992 - AT&T)

I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Stephen Wayne Hamilton said:
I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Click to expand...
Click to collapse
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
drago10029 said:
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
Click to expand...
Click to collapse
If needed, I could back up my /system folder and send it to you.
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
it's alright man. someone on android forums has already made a custom ROM. so the ball is rolling on out weak old device :laugh:
build.prop?
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
did you ever get around to doing this? there is supposedly a stock image on androidforums but when I opened the Zip, all it had was the stock apps, no build.prop, which I think I blew away with xblast (xposed plugin). now I hang on the boot screen image. there is a stock Rom for the z993 our there, which I suppose I could use, because they are supposed to be the same phone, just different carriers... but then I need to get the at&t apn's and it is just a PITA. so if you could post /system backup or just a stock build.prop, that would be great!
(I'd post links to these rooms but I guess I'm too new of a member... I can provide them if needed.)
I'm way late on this, but just thought I'd post to say that I no longer have the device, and I was never able to fix it.In any case, I hope the rest of you guys get it fixed. It seemed to be a halfway decent phone, although a bit sluggish at times. But beyond that, with all the bloat removed, I'd say it ran pretty well for the duration of time that I had it (less than a month). I currently have a GNote 3 (T-Mobile) and a GNote Pro 12.2" now and it's just awesome, I'm really loving them.
Sorry, accidental double-post (can't figure out how to delete this post, the "Edit/Delete" button doesnt appear to have any option to entirely delete a post).
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
alirezayami said:
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
Click to expand...
Click to collapse
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
alirezayami said:
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
Click to expand...
Click to collapse
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
AlexZap said:
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thnx Alex
I would highly appreciate if anyone tell me what ADB Driver I should use for ZTE Z992. I almost understood all the procedure in the links but now the problem is despite I tried different ADB Drivers, but still ADB reboot-bootloader boots phone again in Normal bootloader.
Also Fastboot devices command does not see the phone, while ADB Devices command see it.
Seems bootloader is locked. Right? What should I do?
This is the method I used when I rooted my avail2 :
http://androidforums.com/zte-avail-2-zte-prelude/821217-how-root-zte-avail-2-z992-guide.html
The author (and I) just used the included drivers from zte that come with the phone. From what I remember, fastboot worked fine. Just hold the volume down button then turn the phone on. It will seem to lock on the start screen, but this is the bootloader. Then connect your cable and try your fastboot commands.
If you are already rooted, you can just download the package here
http://androidforums.com/prelude-all-things-root/797487-cwm-recovery-installer-zte-prelude.html
And skip the middle section, using the impactor to root (13 and 14).
Depending on what's wrong with your phone, you could also try just using the stock recovery and doing a system reset there. It will wipe any bad custom settings, but if the rom is still viable it might get you up and running again. It got me out of a bootloop without re-romming the whole thing. And with titanium backup or system app mover you can reinstall anything you need in the system partition.
*edit - Damn kindle auto correct
Sent from my KFTHWI using Tapatalk
A bit to much fiddling resulted in disaster
Hello XDA forum users,
I'm about ready to toss this phone in the trash. I have an AT&T Avail 2 with model number z992, which is apparently manufactured by a company called ZTE. First I think it would be helpful to explain what I've done to the phone and perhaps others out there can tell me if I've destroyed the phone or if it can be fixed.
A friend of mine sold me the phone for 10 bucks, its in great condition which is why its such a shame that it seems perma-bricked. I have no need for the phone aspect of the device, I simply wanted to "convert" it to a handheld media/application player, like an ipod or tablet for example. The phone comes with several bundled software applications that I find completely useless and wanted them removed, EX. AT&T Navigator and other AT&T software, plus a bunch of google applications.
The first thing I did when I decided to try and customize it was to use Kango's root tool which worked and rooted the phone. I was all excited that it worked and continued by installing the Super User application which allowed me to gain full control over the device. (I should have stopped there.) After the successful phone root I then installed a 3rd party app called NoBloat and used its uninstall options to remove a lot of stuff. I couldn't tell you exactly what all was removed but looking back, it must have been more important than I realized at the time. I know I took out all the AT&T software, then all the Google stuff to, which destroyed the play store. I didn't take out anything that seemed like a system file but apparently the Google stuff is the system files. The phone still worked in this state but it was erratic and things like Contacts would crash even if it was not running. So I considered that a failed attempt and commenced to do a factory reset using the recovery menu (Vol Up + Menu Key + Power button) but the factory reset didn't work, well not like it was supposed to. I had used the restore option before and it made the phone work like it was brand new. Now when the phone is powered on it will boot to the initial setup and ask me to choose a language, then it will get as far as the wireless connection screen (sometime not even that far) and the phone reports that "Unfortunately, Setup Wizard has stopped." and then I tap OK and the setup wizard restarts at the language screen. This is the state it is in now and I do not know how to fix it, I'm beginning to think there currently is no method to fix this.
Things I've tried so far include installing minimal ADB-Fastboot to try and sideload various ROM images, the ones I found here and other places. The phone is not recognized by Windows 7 though and the ADB does not work like it did on a motorola phone I did this to before. I've also purchased an inexpensive 8GB microSD chip with an adapter so I could put the ROM info on that and tried the "Update from external storage option" and that seems like it would work but none of the ROM's I've used will install. I guess because there is some kind of security feature built into the phones hardware which checks the data files for specific tags/sizes and therefore won't accept any of the ROMS I've tried.
There is no means to access the old file system anymore like most guides show, I do not have any CWM's installed nor any backup data whatsoever. It's been reset and now it seems the data it used to restore itself is, while not completely missing, damaged and will not reload anymore. All the guides I've read or watched usually show the user in the operating system or using software on a PC to type out commands. None of that works on this phone though, the phone as I just described it is basically bricked. Is there anything that can fix this, or is the phone a paper weight now? A functional ROM image from AT&T seems unlikely as they have absolutely no relevant information about this on the commercial website and the help and support seems like it's setup for old people who don't understand technology at all. If anyone out there has experience with issues like this then by all means let me know. If more information is necessary then I will be glad to provide it if available.
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Britton Burton said:
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Click to expand...
Click to collapse
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commands
adb.exe push cwm-z993.img /cache
adb.exe shell "su -c 'dd if=/cache/cwm-z993.img of=/dev/block/mmcblk0p17'
This should flash cwm if your phone is rooted and adb shell is working.
Sent from my KFTHWI using XDA Premium 4 mobile app
AlexZap said:
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commandsp
Click to expand...
Click to collapse
I have not come across that particular file yet, I did try to google it and the only results it had were two and one of those was this post. Would you mind telling me where I might find a copy of the kaw202_recoverflasher.zip?
I managed to find the zip you were talking about and have downloaded it, for anyone else looking for it. I am unable to post links but I would have linked to the files you mentioned. For others looking for the same zip file search for "CWM Recovery Installer ZTE PRELUDE". That's the title of the thread I found the file on that Alex mentioned above. The instructions on the page don't seem like they apply to the situation I'm stuck in but I'll give it a whirl anyway and see if the files work.
If this forum is like the others I've read through so far then there is no real answer to the issue. The phone seems kind of new and not many of the power users on these forums use rinky dink phones like this one. You guys all have the 600 dollar models I guess. What bugs me about this this phone and the state I managed to put it in, is that the damn thing was programmed the first time when it was made. So it seems to me like there should be a way to reprogram the phone the same way the factory did it. Think about it, when they make the phones they don't have any information on the phone at all. It's completely empty, so there must be a way to load the software for the phone even if the phone has no data at all in the main storage. If the files in the recovery flasher.zip file work then I'll post back the results but if it's like the other files I've messed around with (which didn't do anything) then I'm throwing it in the trash can.
Anyway thanks for your response and for pointing me in a different direction Alex
---------- Post added at 09:15 PM ---------- Previous post was at 08:39 PM ----------
HELL YEAH!!! It worked thank you Alex, ​
I would have never figured this out without your help! The phone now has a version of CWM on it and the recovery menu is different. I just tried to install a ROM and it said successful. After the phone rebooted went back to the setup screen from ZTE but it still did the same thing. However this is progress and I should be able to "wander in the dark" and figure out a way to use the CWM to install a completely new rom. Any recommendations on a ROM to use for the z992?
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Britton Burton said:
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Click to expand...
Click to collapse
ze
Glad I could help, but none of the work was done by me, the guys over at android central did all the heavy lifting, I just pointed you in the right direction. I have a stock system e m image around here somewhere if you need it, tho installation will be a bit more complicated. If azazels rom ever gives you issues, ill dig it up and try and help you install it.
Sent from my KFTHWI using XDA Premium 4 mobile app

Recovery and/or ROM for LG L15G?

Does anyone know of a custom recovery that has been compiled for the LG L15G (AKA Sunrise)? I've been looking all weekend for one and haven't had any luck. I know there's no official build of either CWM or TWRP available for it, but I'm hoping to find an unofficial build that will work. I have it rooted already, but I've not been able to find a recovery for it and I don't want to do any more hacking till I have that.
Also if anyone can point me towards a decent custom ROM for this thing I'd appreciate it. I haven't had any luck finding that either.
siskulous said:
Does anyone know of a custom recovery that has been compiled for the LG L15G (AKA Sunrise)? I've been looking all weekend for one and haven't had any luck. I know there's no official build of either CWM or TWRP available for it, but I'm hoping to find an unofficial build that will work. I have it rooted already, but I've not been able to find a recovery for it and I don't want to do any more hacking till I have that.
Also if anyone can point me towards a decent custom ROM for this thing I'd appreciate it. I haven't had any luck finding that either.
Click to expand...
Click to collapse
i have this model but i updated it before I knew it would prevent me from rooting it... any way you could upload a backup of your firmware that I can use to downgrade to?
How can you beat a $9 phone
siskulous said:
Does anyone know of a custom recovery that has been compiled for the LG L15G (AKA Sunrise)? I've been looking all weekend for one and haven't had any luck. I know there's no official build of either CWM or TWRP available for it, but I'm hoping to find an unofficial build that will work. I have it rooted already, but I've not been able to find a recovery for it and I don't want to do any more hacking till I have that.
Also if anyone can point me towards a decent custom ROM for this thing I'd appreciate it. I haven't had any luck finding that either.
Click to expand...
Click to collapse
Just picked this phone up too, any luck on getting a ROM for it?
I picked one up....couldn't resist for just $9.82. I didn't let it update, so I was able to root it with Kingroot 4.6. Quite snappy after all the bloatware was removed. Have about 1.5gb of internal memory left, but added an 8gb microSD. I haven't been able to findy any recovery, doubt one exists. Nice little emergency phone to have in the car or backpack.
Just picked this phone up as well, and KingoRoot doesn't work. I wasn't prompted for a firmware update when I first cranked it up so I guess I'm on some version that isn't supported? Can anybody clarify what the status of this device is currently? I've got the Tracfone version.
I just rooted my LG L15G tracphone with KingRoot and it worked immediately. Great!
Next step is to get this 10 dollar phone unlocked.
By the way, my firmware version is: Android 4.4.2
I picked one up last night. Kingroot said my device wasn't supported but clicking "try it" successfully rooted the device!
I replaced Kingroot with SuperSU by following these directions: http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html?m=1
I've removed McAfee, but are the Tracfone bloat apps safe to remove?
Tracfone refused to give me the unlock code because their policy is that the phone must be active and have minutes on it for 12 consecutive months (wtf?)
One unlock website did have our device listed (http://www.imei-unlocker.com) but both their methods said that unlock wasn't available yet. They refunded me for both attempts.
If anyone has a Linux setup, we can compile our own TWRP. I found the kernel source earlier today: http://opensource.lge.com/osSch/list?types=NAME&search=Lgl15g
anuraj1 said:
I picked one up last night. Kingroot said my device wasn't supported but clicking "try it" successfully rooted the device!
I replaced Kingroot with SuperSU by following these directions: **Link removed**
I've removed McAfee, but are the Tracfone bloat apps safe to remove?
Tracfone refused to give me the unlock code because their policy is that the phone must be active and have minutes on it for 12 consecutive months (wtf?)
One unlock website did have our device listed (**Linked Removed***) but both their methods said that unlock wasn't available yet. They refunded me for both attempts.
If anyone has a Linux setup, we can compile our own TWRP. I found the kernel source earlier today: **link removed **]
Click to expand...
Click to collapse
I just got this phone for Christmas. What version of Kingroot did you use? The ones I'm downloading don't work. (The one I've tried says something about no available root strategy and adds me to some stupid que line or something. There is no "try it" button after it does this.) You happen to have the specific APK you used and what version was your phone on when you rooted it?
Currently mine is Android version 4.4.2 with kernel version 3.4.0. I haven't attempted to update it yet as I am to assume that would be a bad idea. Unless you have a version newer then mine, then I guess updating would actually help me in this situation.
Looks like there STILL isn't any custom rom or custom recovery for this phone yet. It's been out since July and thanks to the $10 phone promo, there are tons of these out in the wild so I'm surprised nothing has been done with it yet.
I really want to root it as I want to remove some bloatware like McAfee and Polaris office. I would also like to uninstall Chrome so that I can install it to SD card. (unless Chrome can't be moved to SD card, in which case this would be a waste of time I suppose.) Aside from a few extra Google apps, there really isn't that much bloatware aside from what I already mentioned above. I can wait for a custom rom/recovery (though having a custom recovery would be nice as it would allow me to backup my phone incase something gets messed up). I just want to free up some internal storage by removing the bloatware.
(also, the no outside links thing with new users is annoying. I agree new users shouldn't be allowed to. But please at least code the forum to be smarter. I had to manually remove all the links to a post I quoted before it would let me post. That's kinda stupid. If I quote a post in the same thread I'm responding too that has links, it should be assumed to be safe since the links were posted by a verified member. I would hope the forum could fix that or at least have the common ***king courtesy of removing the links from the quotes for me. )
EDIT:
Ok some interesting news to report. It almost wants to work now. For what ever reason, it randomly decided to finally show me the "Try it" button. (I should have clarified earlier it never displayed that button. It would just say root strategy unavailable and that was the end of it. Now it says there is one and lets me use the Try It button. However it will get to about 60% (though it will randomly stop earlier on other attempts. Sometimes my phone will reboot after it reaches 20% or so) it will just say root failed.
I don't understand why this is seeing that my LG Sunrise is pretty much the same as someone else who managed to root it with Kingroot. It's never been updated. (I even checked for updates and there aren't any).
The only thing I can think of that might be a problem is that the phone isn't yet activated as I have not gotten air time for it yet. Does this root process require the phone to be on an active SIM first?
Root with Root Genius
I have root my LG L15G (Android 4.4.2, kernel 3.4.0+, software version LGL15G10f) with Root Genius for PC v3.0.85.
Of cource, before rooting "Developer options" must be unlocked (5-8 taps on Settings>About Phone>Software information>Build number) and turned on; in "Developer options" must be selected "USB debugging".
After this connect phone to PC. All phone drivers must be installed.
Run Root Genius. When program will ready and say about connect with LG L15G - press one button. After 2-3 minutes root is enabled.
Titanium Backup works. But I have no ideas for unlock the phone to make a possibility work in other GSM-networks, except TracFone's.
Hmm, I had tried Root Genius and that didn't work for me (and yeah I did enable USB debugging. I apparently was using an older build of Root Genius. But I found and used the build you used and still get the unsupported model error. ). My software version is as follows:
Android Version: 4.4.2
Baseband version: M8610B-AAAANAZM-1.0.6060
Kernel version: 3.4.0+
Build number: KOT49I.LGL15G11a
Software version: LGL15G11a
There does appear to be some differences in the software version of mine vs the post above me. I'm guessing they changed something. But that's odd as my phone was brand new just like yours assuming you got it around the same time as me.
EDIT. Ok some bad news. Looks like there was a newer software update (that my phone apparently came with) that blocks root and even prevents download mode from working. (I had attempted to boot into download mode but none of the button combinations work and even the root scripts I've tried can't get it to reboot into download mode)
Seems I'm stuck with a phone I probably can't ever root.
It seems it can still be forced into download mode by using a "56k/130k/910k cable" cable (special cable with resistor on one of the data lines). But they are running for $18 on ebay and way to damn expensive for a simple cable with a resistor installed. Resistors are probably only worth pennies each, so they are way too expensive to be charging that much for it.
If I had a such a cable, the root script I had tried awhile back might have worked as it needs to get the phone into download mode to finish the process.
There seems that there's little hope for your phone but I may have a solution. My LG Sunrise got updated as well and got root access with the update. You can use King Root but not Kingo.
Look it up on Google. So far I've had no success on getting to the recovery mode.
I've tried rooting with KingRoot. It will just say it failed after 20% (sometimes it goes higher, but always end with it saying this).
Note that unlike your phone, mine already had the latest update out of the box.
Apache Thunder said:
I just got this phone for Christmas. What version of Kingroot did you use? The ones I'm downloading don't work. (The one I've tried says something about no available root strategy and adds me to some stupid que line or something. There is no "try it" button after it does this.) You happen to have the specific APK you used and what version was your phone on when you rooted it?
Currently mine is Android version 4.4.2 with kernel version 3.4.0. I haven't attempted to update it yet as I am to assume that would be a bad idea. Unless you have a version newer then mine, then I guess updating would actually help me in this situation.
Looks like there STILL isn't any custom rom or custom recovery for this phone yet. It's been out since July and thanks to the $10 phone promo, there are tons of these out in the wild so I'm surprised nothing has been done with it yet.
I really want to root it as I want to remove some bloatware like McAfee and Polaris office. I would also like to uninstall Chrome so that I can install it to SD card. (unless Chrome can't be moved to SD card, in which case this would be a waste of time I suppose.) Aside from a few extra Google apps, there really isn't that much bloatware aside from what I already mentioned above. I can wait for a custom rom/recovery (though having a custom recovery would be nice as it would allow me to backup my phone incase something gets messed up). I just want to free up some internal storage by removing the bloatware.
(also, the no outside links thing with new users is annoying. I agree new users shouldn't be allowed to. But please at least code the forum to be smarter. I had to manually remove all the links to a post I quoted before it would let me post. That's kinda stupid. If I quote a post in the same thread I'm responding too that has links, it should be assumed to be safe since the links were posted by a verified member. I would hope the forum could fix that or at least have the common ***king courtesy of removing the links from the quotes for me. )
EDIT:
Ok some interesting news to report. It almost wants to work now. For what ever reason, it randomly decided to finally show me the "Try it" button. (I should have clarified earlier it never displayed that button. It would just say root strategy unavailable and that was the end of it. Now it says there is one and lets me use the Try It button. However it will get to about 60% (though it will randomly stop earlier on other attempts. Sometimes my phone will reboot after it reaches 20% or so) it will just say root failed.
I don't understand why this is seeing that my LG Sunrise is pretty much the same as someone else who managed to root it with Kingroot. It's never been updated. (I even checked for updates and there aren't any).
The only thing I can think of that might be a problem is that the phone isn't yet activated as I have not gotten air time for it yet. Does this root process require the phone to be on an active SIM first?
Click to expand...
Click to collapse
If you still haven't got root yet,for me it was McAfee that's been blocking Kingroot every since Nov.
Even though I never set up an account,it was the culprit..I opened the McAfee app created the account and Disabled.
Went to settings,ALL apps,then opened McAfee..Scrolled down to ''manage space'' and deactivated and hit force stop.
Then I ran KingRoot version 4.8.0 from this site.My device rebooted at around 30%,went back to KingRoot and it finished rooting.
THANK YOU!
It took a few tries, but after disabling McAfee's root protection (It completely skipped my mind that this stupid app would have a feature that would interfere. ) KingRoot definitely did it's thing. (I had to re-attempt twice because once it rebooted and failed. So I had to kill the app again and try again. That time it rooted without restarting).
I've already uninstalled McAfee and a few other system apps I need to get rid of. (McAfee on a $10 phone? Yeah..... No.... I'll take my chances. )
I also replaced KingRoot with SuperSU and uninstalled Purify and the KingRoot app that installed the root. After cleaning out unneeded bloatware, this phone is pretty responsive now! It used to lag a little and not register touches some times. But after cleaning out the bloatware (McAfee was probably the main source of the lag) it runs pretty well now!
EDIT:
Ok minor issue. I can't seem to uninstall Chrome (since it's a system app on this phone). It keeps reinstalling it self. It won't stay gone. What would be causing that? I wanted to move Chrome to SD so it doesn't take up space. But this particular phone won't let me.
Seems to happen with Polaris Office as well. Not a big deal at the moment. I can just freeze this app so it won't take up any CPU time/ram. Freezing it seems to work fine. Uninstalling it just results in it mysteriously reinstalling it self....
Does yours lose root after rebooting? I tried to run 'adb reboot recovery' for giggles and SuperSU no longer had root when it failed to start the local and booted normally.
---------- Post added at 04:27 AM ---------- Previous post was at 04:19 AM ----------
anuraj1 said:
If anyone has a Linux setup, we can compile our own TWRP. I found the kernel source earlier today: http://opensource.lge.com/osSch/list?types=NAME&search=Lgl15g
Click to expand...
Click to collapse
I have the Android SDK installed on my desktop but the TWRP porting guide by Dees_Troy is a little bit too vague for a first timer. I was able to extract the stock recovery using dd this afternoon.
I haven't tried to reboot mine into recovery mode. But root sticks when doing normal reboots.
recovery/rom LG-L15G
I am currently working with this phone to provide a twrp recovery that will work properly, please hang on while i work out the bugs. its been a while since i developed anything, was taking a extended break from development
DroidHost said:
I am currently working with this phone to provide a twrp recovery that will work properly, please hang on while i work out the bugs. its been a while since i developed anything, was taking a extended break from development
Click to expand...
Click to collapse
That's really awesome! I'm looking forward to what you come up with. I'd be happy to send you some beer money for your efforts as well!
anuraj1 said:
That's really awesome! I'm looking forward to what you come up with. I'd be happy to send you some beer money for your efforts as well!
Click to expand...
Click to collapse
Hang on to that beer money for now, I am working on zeroing the /laf partition to gain access to fastboot hopefully this will work out, and we will have save and easy way to unlock the bootloader on phone to make it flashable
DroidHost said:
Hang on to that beer money for now, I am working on zeroing the /laf partition to gain access to fastboot hopefully this will work out, and we will have save and easy way to unlock the bootloader on phone to make it flashable
Click to expand...
Click to collapse
That's fantastic. If it would help, I have one of those variable resistor cables that some LG phone requires for supporting baseband or entering the bootloader.
This is the cable I have: http://m.ebay.com/itm/131321398015
It is described here as well: http://forum.xda-developers.com/showthread.php?t=2069564

[GUIDE]How to root Moto G4 (Moto G 2016) the right way or fix a bad attempted root

Trying to root Nougat (Android 7)? Then read the comments at the bottom please...
I will first state I do NOT own a Moto G4, I own the G3 and the X Pure which are both 3rd Gen devices, but I was requested to write this tutorial by a few users here due to lots of failed root attempts using older "standard" methods that do not work on this device. I also do not like the "one click" root methods, because they can and do fail (KingoRoot will brick a Moto G3/4, regardless of what it's web page says), and when they do people have no idea how to fix it. The manual way is not difficult, and it teaches you how to work on, fix, and use your device on a level above that of the average smartphone user.
I will only cover rooting, the prerequisites are covered elsewhere in detail and I will link to reliable sources for the information. Specifics of the prerequisites are outside of the scope of this tutorial, but are open for discussion in this thread. Remember, I do not own this device although the methods used are the same as similar devices.
Prerequisites:
0) Be running Marshmallow (Android 6.x) stock ROM, at this time Nougat (Android 7.x) is not working via any method.
1) Device must have an unlocked bootloader. See Moto - Unlocking the Bootloader for more info.
NOTE: As of 7/18/2016, Amazon ad-subsidised Moto G 4th Gen devices cannot be bootloader unlocked, therefore they cannot be rooted. Sorry, Lollipop and newer Android security changes pretty much put an end to that.
2) You need to have TWRP installed or one-time booted via fastboot. CWM and other recoveries will NOT work at this time. See TWRP's Moto G 2016 page
3) You need a copy of the latest stable SuperSU ZIP from Chainfire's site on the internal storage or SD card of your device. SR1-SuperSU-v2.78-SR1-20160915123031.zip is the lastest version verified to work with this method.
Note: Do NOT use any 2.77 version, it was a beta intended specifically for the SG Note 7 and will not work, it does not harm but fails to root.
4) Reboot and start TWRP recovery, and PERFORM A COMPLETE BACKUP IN TWRP (Nandroid)!!!
How to do it:
Now, the procedure is the same whether you are trying to root the first time, or you did it the old way just flashing SuperSU and are now not able to boot...
In TWRP, go to Advanced and open the Terminal, in the terminal type this EXACTLY as shown:
Code:
echo SYSTEMLESS=true>>/data/.supersu
Now press enter (there is no confirmation returned), then exit and press the Home key. Go to Install and select the SuperSU zip file you downloaded from Prerequisite #3 and swipe to flash it and reboot. No need to clear caches or anything else but you are welcome to if you wish. You can install SuperSU updates normally through the app going forward (as of this posting).
Why do I have to do this???
For whatever reason, the install script for SuperSU does not recognize that this device (like many others) requires a systemless root installation. By creating /data/.supersu in the TWRP recovery environment, the SuperSU install script parses the file and sees "SYSTEMLESS=true" and ignores what it auto-detects and forces a systemless root installation.
Hope this is helpful to someone!
As always, if this is the first time you have booted TWRP or attempted root... BACKUP IN TWRP FIRST!!! Once the system is modified, it cannot be undone (easily) and you will always have a known good starting place if the worst happens.
EDIT: Photos added showing what a proper command and flash should look like. Note that in picture 1 the exit command is not needed, you can just back out. In pictures 2 and 3 a proper flash of SuperSU is shown, note that system-less mode is specified and the boot image is patched, this is what should occur. It is normal for it to loop once or twice, but that is it, first boot could take 10 minutes plus.
Notes on Nougat/Android 7... At this time this method of rooting does not work properly on the official Nougat ROM for this device, it causes WiFi issues and interface problems (settings crashes, etc) and with no complete factory image there is no work fix other than to restore your Nandroid backup to pre-root status. If you wish to play with this method and try it, your on your own, I will try to assist but as I stated earlier I do not own this device. To my knowledge as of this posting, there is no working root on stock Android 7 on this device.
I can confirm this worked on my formerly-amazon XT1625 16GB G4. You will get an error about not being able to mount /data, but it proceeds and works anyway.
This is exactly what was missing! I rooted as normal with the latest SuperSU expecting it to just work like on other phones/tablets, but yeah. Before specifying systemless, it hung on boot. After following your instructions it booted right up. Thanks!
Also if you setup adaptable storage with your SDcard, so it works like internal storage, TWRP can't find any files on the SDcard. You will need to revert to non-adaptable storage for TWRP to find the supersu ZIP file.
And make sure you're using the latest SuperSU-- I accidentally tried a very old version which did not work!
Scared Noobie
I should probably be posting this on some noobie forum, but I read Motorola's "Unlock Your Bootloader" and it scared the **** out of me. Can someone give me a ballpark figure of the chances of bricking the phone? (I know this particular phone is new, but I'm just looking for a rough estimate. How common is it generally to brick a phone just from unlocking the bootloader?)
Appreciate this. I miss the old days where it was all simple. Everything was flashable. Never had to flash back to something or re flash.
cuvtixo said:
I should probably be posting this on some noobie forum, but I read Motorola's "Unlock Your Bootloader" and it scared the **** out of me. Can someone give me a ballpark figure of the chances of bricking the phone? (I know this particular phone is new, but I'm just looking for a rough estimate. How common is it generally to brick a phone just from unlocking the bootloader?)
Click to expand...
Click to collapse
It's about as common as bring bricked from performing a factory reset, because that is the only part that really does much... So extremely rare, but the possibility is always there. Remember to have patience, the resets and wipes can take what seems like forever.
The dangerous part is what you do after the bootloader is unlocked.
Sent from my MotoG3 using Tapatalk
cuvtixo said:
I should probably be posting this on some noobie forum, but I read Motorola's "Unlock Your Bootloader" and it scared the **** out of me. Can someone give me a ballpark figure of the chances of bricking the phone? (I know this particular phone is new, but I'm just looking for a rough estimate. How common is it generally to brick a phone just from unlocking the bootloader?)
Click to expand...
Click to collapse
Very rare...all you need is read, read, read and follow the instructions. Good luck
Very nice and just what I needed. Worked perfectly on my Amazon Moto G4 with ads. I got no errors or messages but booted fine-got caught in a boot loop once as the SuperSU file explains after it installs. Boots in less then a minute first time.
Marty
acejavelin said:
It's about as common as bring bricked from performing a factory reset, because that is the only part that really does much... So extremely rare, but the possibility is always there. Remember to have patience, the resets and wipes can take what seems like forever.
The dangerous part is what you do after the bootloader is unlocked.
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Hey i wiped this up based on your post it should really help. it completely automates the process check it out if you want to and you can also ad it to the OP if you want to.
DOWNLOAD TOOL HERE Root-moto-g-4th-gen
Tomsgt said:
Hey i wiped this up based on your post it should really help. it completely automates the process check it out if you want to and you can also ad it to the OP if you want to.
DOWNLOAD TOOL HERE Root-moto-g-4th-gen
Click to expand...
Click to collapse
cheers mate
I signed up for xda just to give you props! I rooted my phone using instructions not from here and i was suck in a boot loop. your little command there fixed it! I freakin love you.. wish i could buy you dinner! Thanks a million
zipjay said:
I signed up for xda just to give you props! I rooted my phone using instructions not from here and i was suck in a boot loop. your little command there fixed it! I freakin love you.. wish i could buy you dinner! Thanks a million
Click to expand...
Click to collapse
Your welcome... Just give click thanks on the first post, but if you feel absolutely compelled to buy me dinner, there is the Donate button.
Sent from my MotoG3 using Tapatalk
I rooted my G4 in the normal way using supersu 2.46, and now boot hangs on the white Moto screen. (advice from another site)
I am waiting for a SD card to update to 2.76 with the systemless command.
Is there anything else I can do in the interim, I tried deleting the contents of /supersu from Twrp and that hasnt made any difference. I have also wiped data and caches.
thanks .. Mike
mikeruss said:
I rooted my G4 in the normal way using supersu 2.46, and now boot hangs on the white Moto screen. (advice from another site)
I am waiting for a SD card to update to 2.76 with the systemless command.
Is there anything else I can do in the interim, I tried deleting the contents of /supersu from Twrp and that hasnt made any difference. I have also wiped data and caches.
thanks .. Mike
Click to expand...
Click to collapse
Can't you just use MTP mode of TWRP to copy the latest SuperSU to internal storage then flash after creating the config file?
Sent from my MotoG3 using Tapatalk
thank you, worked fine.
would I be right in thinking I need the sdk23, arm, 64 bit version of xposed ?
mikeruss said:
thank you, worked fine.
would I be right in thinking I need the sdk23, arm, 64 bit version of xposed ?
Click to expand...
Click to collapse
I don't know... I don't own the G4 *yet* but possibly in the near future now that I know the Amazon version can have the ads striped out easily enough... I would do a nandorid and try it, if it fails, restore and use the 32-bit version.
Someone else may have a better answer for you.
acejavelin said:
I don't know... I don't own the G4 *yet* but possibly in the near future now that I know the Amazon version can have the ads striped out easily enough... I would do a nandorid and try it, if it fails, restore and use the 32-bit version.
Someone else may have a better answer for you.
Click to expand...
Click to collapse
32 bit
Sent from my Moto G (4) using Tapatalk
thanks, xposed works fine
Well, I was planning on joining all of you with your Moto G4's soon, or possibly the G4 Plus... but since the Amazon version can't be unlocked anymore I got cold feet, and today Best Buy was running a special on the Moto X Pure 32GB edition for $249 (My Best Buy Elite members only), I pulled the trigger on that one instead. No change in helping though, I didn't have the device to begin with so I will continue to assist with this thread as I can.

Root halfway achieved!

Hello everyone,
Right now I have another thread for the root over ADB with DirtySanta, I've that far. I have a potential method but I need more information on it from somebody else so I am waiting on a response from him, once i have that I'll work on it. If you guys have any other potential ideas that'd be great.
Thanks,
Abine45
This is my link to the root on ADB. I will be updating it tonight or tomorrow for the convenience of others. Thanks for waiting.
http://forum.xda-developers.com/verizon-lg-v10/general/temporary-root-adb-t3523538
NEW INFORMATION FOUND! I GOT SIGNIFICANT ROOT ACCESS WITH DIRTYSANTA!!!
SO i used the DirtySanta fearing for my life I wouldn't ruin my device, well the v10 failed it. rebooted and it didn't do anything but reboot back into the normal bootloader and stuff. But what i found is that he go the dirty cow to just work under root, so maybe from there we could do something, anybody have any ideas?
people care but it seems kind of like you expect people who have no clue to do any of this to assist. Hence the reason they are willing to pay a rather large sum of money for a bounty.
1. You cannot repackage a TOT file, well you can but, because it is digitally signed so that the locked boot loader will recognize it and allow it access to image the system. Repacking a rooted version on MM or Nougat will brick the phone if it is not digitally signed by LG.
2. You can pull a copy of the boot image with dirty cow but you can do that from the TOT or KDZ. You cannot put a new one in with dirty cow with out bricking the phone.
3. Most likely not. SELINUX policies combined with updates and fixes have removed most of the previous exploits.
4. Nothing personal but if you are asking us where the boot image resides... that does not inspire anyone here to give you a hand. You need to be in the android devs forum asking these questions.
http://forum.xda-developers.com/android/software-hacking
Haxcid said:
people care but it seems kind of like you expect people who have no clue to do any of this to assist. Hence the reason they are willing to pay a rather large sum of money for a bounty.
1. You cannot repackage a TOT file, well you can but, because it is digitally signed so that the locked boot loader will recognize it and allow it access to image the system. Repacking a rooted version on MM or Nougat will brick the phone if it is not digitally signed by LG.
2. You can pull a copy of the boot image with dirty cow but you can do that from the TOT or KDZ. You cannot put a new one in with dirty cow with out bricking the phone.
3. Most likely not. SELINUX policies combined with updates and fixes have removed most of the previous exploits.
4. Nothing personal but if you are asking us where the boot image resides... that does not inspire anyone here to give you a hand. You need to be in the android devs forum asking these questions.
http://forum.xda-developers.com/android/software-hacking
Click to expand...
Click to collapse
How did Tungkick manage to repackage it then? The dirty cow exploit can exchange recovery though on an unlocked bootloader so shouldn't I be able to replace the boot image if done correctly wouldn't it work? I could possibly unpack everything and modify it all and test it but the issue comes back to repacking and flashing?
Ask him, but if you attempt to do this on a locked and encrypted boot loader then you will brick the phone. I mean think about it, if it was really just that simple every phone would be rooted and rom'd. Most phones running 6 or above have had the security vastly increased to make the phone secure so they can be used by government employees. Hence the introduction to SELINUX polices into the kernel which is why getting root is so unbelievably difficult. The locked boot loader resets everything at boot so getting root and maintaining is so hard combined with SELINUX does not allow standard root to perm. write anything to the system partition and then good old hboot kills anything you did mange to write on reboot... you can start to see how difficult this really is.
Tungkick did this on 5.1 Lollipop not 6.0 Marshmallow. The above mentioned difficulties with increased SELunix security plus 6.0 and up requires systemless root.
Still would love to know why no dev will go near this Phone. Does XDA have some deal with LG to not hack their phones? Very fishy why every dev avoids this device like it has the plague.
beavis5706 said:
Tungkick did this on 5.1 Lollipop not 6.0 Marshmallow. The above mentioned difficulties with increased SELunix security plus 6.0 and up requires systemless root.
Still would love to know why no dev will go near this Phone. Does XDA have some deal with LG to not hack their phones? Very fishy why every dev avoids this device like it has the plague.
Click to expand...
Click to collapse
LG are just not popular devices for hacking due to they make if extremely difficult. LG is a Corp. friendly company it is why Verizon loves them where companies like HTC are a bit more user sympathetic.
Funny you say that
beavis5706 said:
Tungkick did this on 5.1 Lollipop not 6.0 Marshmallow. The above mentioned difficulties with increased SELunix security plus 6.0 and up requires systemless root.
Still would love to know why no dev will go near this Phone. Does XDA have some deal with LG to not hack their phones? Very fishy why every dev avoids this device like it has the plague.
Click to expand...
Click to collapse
Funny you say that! Tungick said to me, and i quote "[email protected]#$g you" and blocked me from Facebook. He also told me that he wouldn't tell me because it's a secret. He didn't speak very great English, that's why there is an ing at the end of the F-bomb. I asked Jcase through XDA and he said he wouldn't and so i put it better explanation of help through an email and he said I was harassing him... In which case before hand he said he doesn't develop for LG because he says basically we are A-holes sadly and that we don't live up to our donation pledges.
That's what I'm saying though. It's like no dev will go anywhere near an LG device, at least the newer ones anyway.
They can't be much harder to crack than Samsung and those are getting cracked.
The person who rooted 5.1 on V10 basically tells you to F off. Yeah there is nothing odd about that.
beavis5706 said:
That's what I'm saying though. It's like no dev will go anywhere near an LG device, at least the newer ones anyway.
They can't be much harder to crack than Samsung and those are getting cracked.
The person who rooted 5.1 on V10 basically tells you to F off. Yeah there is nothing odd about that.
Click to expand...
Click to collapse
True, that's why I'm going to try to do it. If you know anything and want to help could use it.
Wish I could help. All I know here is you need systemless root on 6.0+. This has nothing to do with the v10 in particular. Systemless root should work on all devices 6.0+. It has already been achieved on the Galaxy s7 and it has locked bootloader. I don't see any reason why this can't work on the v10.
I just installed Linux on my computer gonna try somethings this weekend... We need to keep in touch
qujuanmiller said:
I just installed Linux on my computer gonna try somethings this weekend... We need to keep in touch
Click to expand...
Click to collapse
For sure, message me on xda.
beavis5706 said:
Wish I could help. All I know here is you need systemless root on 6.0+. This has nothing to do with the v10 in particular. Systemless root should work on all devices 6.0+. It has already been achieved on the Galaxy s7 and it has locked bootloader. I don't see any reason why this can't work on the v10.
Click to expand...
Click to collapse
Anybody can help! Do some research and send it and whatever you would like to do. Try different things, Try to modify bits of code and see what you can do! Always gotta start somewhere!
Modify code? You just went way above my head. I know about root, certainly don't know how to achieve it. That's why I count on the folks at XDA. I only have one v10, can't afford to brick it. Plus I already have root on 5.1.1 and I heard that 6.0 causes this phone to have problems.
Many, many v10's were offered up in order to attain root. Not one was taken by any dev. Maybe you can still get your hands on one of those.
You need to find someone that knows about systemless root. Without that you aren't getting anywhere.
beavis5706 said:
Modify code? You just went way above my head. I know about root, certainly don't know how to achieve it. That's why I count on the folks at XDA. I only have one v10, can't afford to brick it. Plus I already have root on 5.1.1 and I heard that 6.0 causes this phone to have problems.
Many, many v10's were offered up in order to attain root. Not one was taken by any dev. Maybe you can still get your hands on one of those.
You need to find someone that knows about systemless root. Without that you aren't getting anywhere.
Click to expand...
Click to collapse
The thing with that is the fact that even if I know how systemless root works, I still have no way to install it, so first I need to find a way to get in the system.
Think I might have a way though
From what I understand systemless root will modify the boot image to attain root. Super SU will decide how to flash based on firmware version. Will automatically root normal with Lollipop and down, will automatically modify boot image on Marshmallow and up. How you will be able to modify the boot image on a VS990 without bricking it I don't know.
In order to do system less root we need a unlocked bootloader... It says that everywhere I'm reading
Hi abine45,
Please read this post completely, the guys here are close to obtain the perma root on android 6, using dirty cow.
https://github.com/timwr/CVE-2016-5195/issues/9
Sent from my E2006 using Tapatalk
I looked at this thread... a bit more technical than I am able to do... did it end up working? Looks like no, but I might have missed something.
Thanks!

LG G Pad X 2 10.1 UK750 Root ?

Hi I want to know if anyone knows how too root the LG G Pad X 2 10.1 UK750 model and if not then if I can get a hold of a developer who can help. Thank You
Bump-I want to root this thing too, it's a pretty good pad if I could only get the LG crap off of it
Just bought one at US Cellular
I would also like to know this. Seems like a decent tablet for the price I got it
I can supply a system dump I believe, if it will help. If anyone finds anything- please, post it here. Having what few scraps we can find in one spot has to help.
We have to know the bootloader can be unlocked and are all fastboot commands stay intact.
Here's a system dump if that'll help at all.
mingkee said:
We have to know the bootloader can be unlocked and are all fastboot commands stay intact.
Click to expand...
Click to collapse
Here's a system dump. ADB works, can't get into fastboot. I have developer options enabled and I CAN enable OEM unlock...but of course LG isn't allowing unlocking on their dev site.
mingkee said:
We have to know the bootloader can be unlocked and are all fastboot commands stay intact.
Click to expand...
Click to collapse
I can get into download mode, and adb works. Fastboot doesn't seem to be there. I suppose it might be possible to factory sign a modified .kdz? I don't know enough to know if that's possible, but I'll test it if you try and make one
LG Gpad X II 10.1 REALLY want to ROOT!!
Ok, more stuff. Here's a stock boot image and a patched boot image I extracted with magisk. Can anyone figure out a way to put these together and sign it such that it will install? I really want to root this thing. I am willing to try just about anything that stands a chance of working. If you're a dev and willing to at least give it a try, let me know and I'm ready to go at it. If I brick it trying I'm not going to be worried about it-it's nearly useless to me without root.
I notice the stock .Marshmallow .kdz is out in the world now...is there any way to factory sign a modified .kdz and install that, maybe?
wyvernwaddell said:
Ok, more stuff. Here's a stock boot image and a patched boot image I extracted with magisk. Can anyone figure out a way to put these together and sign it such that it will install? I really want to root this thing. I am willing to try just about anything that stands a chance of working. If you're a dev and willing to at least give it a try, let me know and I'm ready to go at it. If I brick it trying I'm not going to be worried about it-it's nearly useless to me without root.
I notice the stock .Marshmallow .kdz is out in the world now...is there any way to factory sign a modified .kdz and install that, maybe?
Click to expand...
Click to collapse
The Android 6.0.1 Build is MXB48T" the same android build as the Pixel C, maybe you can make something from the Pixel C.
Hiya!
I'm a decent bugtester, but definitely not a Developer..I'd be more than happy to bugtest anything installable if someone can come up with it. I did find I can get into EDL mode..but have no idea how to work with it.
Also gonna bump this, I don't even need permanent root or anything like that. I only want to change one line in the build prop so that I can use all apps in dual window (persist.splitwindow.support_all), and setprop did not work.
I've sat over this device for hours at a time, trying every obscure one click root tool, method, and app, to no avail. Strange for a device with a 2016 security patch.
I will test anything you guys can find, regardless of brick potential. I need that split window goodness.

Categories

Resources