Hi Everyone,
I need some help or suggestion from anyone who experienced or fixed the above issue. Browsing different forums I could not find any suitable solution for my particular case.
I cannot install the Galaxy Store apk on my device because when I launch the app the system says that my "device is not compatible with the Samsung Galaxy apps". This app was actually working in the past (only if launched from the Galaxy Wearable app menu) but now after the recent updates to make ECG and BP working again (thank you Dante for the excellent efforts and job done) this Galaxy Store app no longer works.
The reason why I need this application is that I want to buy watch faces for my Samsung Galaxy Active 2 (on Tizen O.S.) and using the Google Play Store app I can only find Watch faces for Wear O.S. that are not compatible with my watch. I have installed "Watch Maker" and "Facer" apps and, at the moment, I am buying watch faces from there, but the Watch faces I am interested to buy are only present on the Galaxy Store app.
Anyone able to help? Thank you.
Stefano
Hi again,
I just found a solution.
I have uninstalled any version of the Galaxy app store previously installed so that now there is no Galaxy Store app installed on my phone.
However this app already exists "built in" into the Galaxy Wearable application menu and launching the Galaxy app store from this menu fix the problem as the app will start and work normally.
Cheers
Stefano
Related
Hi everyone, I was super excited to try out my new Gear Fit 2 (ordered from Best Buy in the US), but heartbreakingly it will not actually connect to my phone. I am on a Galaxy S 6 running the original OS, but the tricky part is that it is from a Japanese provider (DoCoMo). It did not occur to me that the Gear Fit 2 would not work with this phone, but it will not sync with the required Samsung Gear App. The app downloads (I don't know if it matters but I retained the US version of the app store so I could keep my puzzle and dragons profile). The phone can see the watch, and they do the fun Bluetooth pin exchange, but then the app throws an error message that says "Check if your device is compatible and if the app needs to be updated" and then the process won't proceed any further. I have factory reset my phone, uninstalled my old Gear Fit and old Gear Fit manager app, reset the watch, all to no avail. I contacted Samsung customer support and they told me that since I am on a Japanese S6 they can't help me because they are US customer support, instead providing me with a useless link to the Japanese Samsung Products page. I know the GF2 has not launched in JP yet (at least through DoCoMo, but I can't believe that my new toy is absolutely useless. In other news, all of this fiddling around made it so that the old Gear Fit Manager app will not connect to my old Gear Fit anymore so I am now using a 3rd party app which is not quite the same. Any advice is appreciated, otherwise I guess I will ride this out until the GF2 launvhes here and maybe an update will e forthcoming.
PS: there are two reviews in Japanese in the Samsung app market for the new Gear App. They are both very bad reviews stating that the app will not connect o their various devices.
Idk. Just sad and wanting to vent.
Beckyfever said:
Hi everyone, I was super excited to try out my new Gear Fit 2 (ordered from Best Buy in the US), but heartbreakingly it will not actually connect to my phone. I am on a Galaxy S 6 running the original OS, but the tricky part is that it is from a Japanese provider (DoCoMo). It did not occur to me that the Gear Fit 2 would not work with this phone, but it will not sync with the required Samsung Gear App. The app downloads (I don't know if it matters but I retained the US version of the app store so I could keep my puzzle and dragons profile). The phone can see the watch, and they do the fun Bluetooth pin exchange, but then the app throws an error message that says "Check if your device is compatible and if the app needs to be updated" and then the process won't proceed any further. I have factory reset my phone, uninstalled my old Gear Fit and old Gear Fit manager app, reset the watch, all to no avail. I contacted Samsung customer support and they told me that since I am on a Japanese S6 they can't help me because they are US customer support, instead providing me with a useless link to the Japanese Samsung Products page. I know the GF2 has not launched in JP yet (at least through DoCoMo, but I can't believe that my new toy is absolutely useless. In other news, all of this fiddling around made it so that the old Gear Fit Manager app will not connect to my old Gear Fit anymore so I am now using a 3rd party app which is not quite the same. Any advice is appreciated, otherwise I guess I will ride this out until the GF2 launvhes here and maybe an update will e forthcoming.
PS: there are two reviews in Japanese in the Samsung app market for the new Gear App. They are both very bad reviews stating that the app will not connect o their various devices.
Idk. Just sad and wanting to vent.
Click to expand...
Click to collapse
Can you install the Gear manager app for non-Samsung phones to see if that works?
[email protected] said:
Can you install the Gear manager app for non-Samsung phones to see if that works?
Click to expand...
Click to collapse
I tried to find that app, but the only one that shows up in the Google play store for me it the one for Samsung phones and when I Google the link for the nonsamsung device app, it shows but when I follow it, the play store still redirects me back to the samsung version. I DID try to use a 3rd party app with the Gear Fit 2, but it still wouldn't maintain a connection. Thanks for the response though.
I find myself in the same boat as you - very very frustrating. I researched the compatibility, and based on the specs they SHOULD work - no good reason that they wouldn't. Sooooo frustrating!!!
Finally got it running on docomo galaxy s5 unrooted
Here's how
1. Install 'Samsung Accessory Service' (apk search and download)
2. 'Gear Manager' Installation (from the Google play)
3. 'GearFit2 Plugin: installation of (apk search and download)
Did it in this order and it worked.
Enjoy
Thanks Tony!
I was using a Galaxy S6 edge from Japan and had these problems, and manually installing the accessory service and fit2 plugin worked like a charm. Was on the phone for 2 hours with Samsung's customer service and got nothing.
Hello All!
I have a samsung Gear S SM-R750.
I use an application on my android phone, XDrip +, to monitor the blood glucose of my 7 year old daughter ... I can not pass this information to the clock.
my Gear S is running Tizen
I tried installing the wearable widget on the clock, but I could not. It does not appear in the galaxy store anymore to download. in the part of the cell I installed and configured, but in the clock I could not. apparently samsung no longer supports this application for this version of tizen that run on Gear S.
Anyone could help, have any tips?
I tried installing the wearable widget using a .WGT but I did not find it to download.
another option I'm thinking would be to install android Wear on the clock, but I could not confirm if using it I'll be able to use the clock to receive information from XDrip +
thx
Disney+ is on a free trial in the Netherlands right now, so just for fun and curiosity really, I grabbed the APK for the Disney+ app here...
https://apk.support/app/com.disney.disneyplus#per_area
and installed it on my Note 9, and fired up my VPN, connected to the Netherlands and attempted to launch the app.
I guess it must be doing some kind of region check on my phone at launch as it just stops. Visiting the Disney+ app page on the google play store via VPN informs me that the app is incompatible with all my devices even though I have two Nvidia Shields and my Samsung Note 9 as well as a few other android devices - it's definitely running on Shields in the Netherlands as they have been shown on various web sites.
Anyone know of any jiggery pokery we can try to get this thing running on our None-Netherland devices - because we can :silly::silly::silly:
Thanks.
jedivulcan said:
The app you linked isn't complete. It's legit (I checked the SHA-1 hash against an installed, working version of the apk and the one from Google Play are the same).
If you use a VPN provider with an IP based out of the Netherlands & Aurora, you should be able to properly install the app on a rooted device.
SAI (which Aurora uses) allows you to install split/bundled apk or extract complete bundles to archive for later.
You can't login though. The app will give you an error if you try to proceed with signing up or try to enter an existing login. I don't know much more beyond that.
Click to expand...
Click to collapse
Yeah seems like Disney has their uber A-Game engaged for VPN blocking too - probably why they launched the beta in a smaller market, test the load balancing and the gate-keeping all at once.
get it to work with anything?
Did you check any other server? if its not working then you should go for another option like PureVPN or Cyberghost. They both are working fine.
griffindodd said:
Disney+ is on a free trial in the Netherlands right now, so just for fun and curiosity really, I grabbed the APK for the Disney+ app here...
https://apk.support/app/com.disney.disneyplus#per_area
and installed it on my Note 9, and fired up my VPN, connected to the Netherlands and attempted to launch the app.
I guess it must be doing some kind of region check on my phone at launch as it just stops. Visiting the Disney+ app page on the google play store via Disney+ VPN workaround informs me that the app is incompatible with all my devices even though I have two Nvidia Shields and my Samsung Note 9 as well as a few other android devices - it's definitely running on Shields in the Netherlands as they have been shown on various web sites.
Anyone know of any jiggery pokery we can try to get this thing running on our None-Netherland devices - because we can :silly::silly::silly:
Thanks.
Click to expand...
Click to collapse
How to install Disney + using the SAI app.
Hello everyone,
I searched for this but ddidn't find it. So forgive me if I missed it. Here is a link to get Disney + to work on a rooted android device.
https://youtu.be/SOdkuy9dZGs[/url]
There is a link in his description to all the files to download plus the SAI app. It was very easy and I've already watched two episodes of Star Wars Rebels so the app definately works. the Disney + app is split into three pieces then reassembled by SAI.
Good luck!!
?
This worked for me on my rooted Huawei Honor Note 8 !
I had Disney Plus on all my other devices but I could not get it on my rooted Huawei honor note 8 and now it works perfectly!
Thank you ?
I've looked all over and some sites tell me Duo is not compatible with Galaxy Wearable and others say it is, what is the truth? I have a Galaxy Watch 3 connected to the Duo, I am able to get notifications, use Samsung Pay, and adjust the stock faces and settings. I am Not able to download new faces or access the store at all. I am wondering if I am missing something or is wearable just not 100% compatible with Duo?
Hey! I ran into the same thing, moving from a Samsung phone to a non Samsung phone for the first time with my galaxy watch was an adjustment. If you open the galaxy wear app and click discover at the bottom and click view more it will take you to a visibly different version of the watch app store. You can buy new apps, access your purchased apps, works totally fine.
Which SmartWatch does the Find N pair easily with?
It doesn't seem to work with the Samsung Galaxy watch. and are all notifications displayed on the watch?
which watch do you use?
Amazfit gts 2!
i use ticwatch c2.. it works.. but its kinda janky to get it working.. and google fit doesnt sync with the phone..
I couldn't pair my Galaxy watch 5 to my Oppo find N2
Huawei watch buds syncs fine and works well
Huawei Watch GT2 Pro for watch
Huawei Buds Pro 2
Sony WF-1000XM4
Sony WH-1000XM5
Samsung Galaxy buds Pro+
All the above are working perfectly
Huawei Watch GT3 Pro
&
Oppo Watch 3 Pro
My Garmin Venu 2+ works fine - therefore most Garmin watches should work fine
All my smartwatches works fine with my find n:
- Montblanc summit gen 2 (wear os)
- TicWatch 3 Pro Gps (wear os)
- Huawei GT2
Find N77 said:
Which SmartWatch does the Find N pair easily with?
It doesn't seem to work with the Samsung Galaxy watch. and are all notifications displayed on the watch?
which watch do you use?
Click to expand...
Click to collapse
Chupakabrak said:
I couldn't pair my Galaxy watch 5 to my Oppo find N2
Click to expand...
Click to collapse
I just ditched my ticwatch c2 for a pair of Samsuck Watch 4 classic.. I'll outline what worked for me as a repository for watch 4 (I dunno if it will work with watch 5)..
1. Install Chinese version of wear os.. 2.6.2 is the latest version if I'm not wrong.. it's ok to install older 2.5.5 version from apkmirror.
2. Give wear os auto launch permissions, background running permissions and nearby devices permission.
3. Install older version of Samsuck wearable app (I used 2.2.54.22112861, Dec 2022).. install older version of Samsuck watch4 manager plugin (I used 2.2.11.22012751).. u might wanna try earlier versions of watch5 plugin not from the app store to test what works..
4. U can take this chance to give some auto run permission to wearable n plugin app..
5. Install Samsung Health..
6. Open Samsung health app, do whatever necessary setup to get to main screen..
7. Select 3 dot menu > settings > accessories.. power on ur watch..
8. Click scan for accessory at the bottom of the page n wait for the watch name to pop up.. clicking on it will start pairing process..
9. Once paired, wearable app will open up and start irritating u with all the terms n conditions plus approval to spy on u.. select what is necessary to get through..
10. Wearable will download 2.6.2 wear os (china) and install.. it's a prerequisite, or else it will not finish pairing.. wear os seems to be needed for communication with watch..
11. After wear os is updated, u will see a page with Google's TOS.. uncheck the diagnostics and location and click next.. I never manage to proceed further if I left either diag or location enabled, so just switch both off..
12. Sit and wait for the setup to complete.. once completed, u can go to play store and update the watch plugin to the latest version..