General Root seems to be broken on December update / don't flash until it's solved - Google Pixel 6

There is some talk in the P6 race to brick Telegram group, it seems that the december update is causing root to fail.
So until this is fixed/solved, DO NOT UPDATE IF YOU WANT TO RETAIN ROOT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Oh no topjohnwu you didnt

ne0ns4l4m4nder said:
Oh no topjohnwu you didnt
Click to expand...
Click to collapse
He is working for the enemy now, was only a matter of time for problems to arise since he already stopped supporting MagiskHide at the behest of Google^^
Maybe Magisk just needs an update, maybe we have a bigger problem, we'll see

Nah, he'll find root or another Magisk developer will.

Cant we flash a patched stock boot image after the problem is solved?

As OP stated, do not update to December if you want to keep root. I did before I checked forums and lost root. Rolling back to November to hopefully regain access to root.

bb709394 said:
As OP stated, do not update to December if you want to keep root. I did before I checked forums and lost root. Rolling back to November to hopefully regain access to root.
Click to expand...
Click to collapse
Please report back if its possible to roll back

I don't see any update when I check for update on my Pixel 6.
Do I need to something to get the update? I ma not rooted and hence do not worry about rooting.

bb709394 said:
As OP stated, do not update to December if you want to keep root. I did before I checked forums and lost root. Rolling back to November to hopefully regain access to root.
Click to expand...
Click to collapse
Tread carefully, someone tried dirty flashing which then required a clean flash.

cd993 said:
Tread carefully, someone tried dirty flashing which then required a clean flash.
Click to expand...
Click to collapse
Yup, dirty flashed failed and requiring a clean flash. Good learning experience and lesson for me, don't jump the gun with the newest updates.
Assumptions made when I flashed December update on 4A 5G without any problems... c'est la vie.

bb709394 said:
Yup, dirty flashed failed and requiring a clean flash. Good learning experience and lesson for me, don't jump the gun with the newest updates.
Assumptions made when I flashed December update on 4A 5G without any problems... c'est la vie.
Click to expand...
Click to collapse
Yeah I would have held off rooting, as whilst sideloading the OTA I read that root wasn't working... oh well, a fix will come soon I'm sure

i didnt read this forum before flashing, now im stuck on a screen with the google logo and a loading bar. is my phone ****ed?

does anyone get corrupted data and stuck on google logo? any help?

Lainey52900 said:
i didnt read this forum before flashing, now im stuck on a screen with the google logo and a loading bar. is my phone ****ed?
Click to expand...
Click to collapse
You'll likely have to use the Google reset to factory process to ever use the phone again. I haven't rooted my Pixel 6 yet, though, so I can't confirm. But that's how I fixed a bad Pixel 5 update.

XNine said:
You'll likely have to use the Google reset to factory process to ever use the phone again. I haven't rooted my Pixel 6 yet, though, so I can't confirm. But that's how I fixed a bad Pixel 5 update.
Click to expand...
Click to collapse
what google reset?

Vio281 said:
what google reset?
Click to expand...
Click to collapse
Google Pixel - Update and Software Repair
Need a USB cable and Chrome (I think, never used a different browser for it).
Again, I can't confirm this works but it's just an educated guess

XNine said:
Google Pixel - Update and Software Repair
Need a USB cable and Chrome (I think, never used a different browser for it).
Again, I can't confirm this works but it's just an educated guess
Click to expand...
Click to collapse
just try it, only work up to google 5

Okay, so for anyone else here who tries to root using the December patch and gets stuck on the Google logo screen, here are the steps I took to fix it:
1. Hold down the power button until the phone turns off
2. Enter fastboot via holding down the power button and volume down
3. Attach a usb cable to a computer, download the factory image zip, then extract it
4. Once extracted, double click on "flash-all.bat," this will reflash every single component of the image to your phone and once it's done, will reboot and should boot as if nothing ever happened.

Lainey52900 said:
Okay, so for anyone else here who tries to root using the December patch and gets stuck on the Google logo screen, here are the steps I took to fix it:
1. Hold down the power button until the phone turns off
2. Enter fastboot via holding down the power button and volume down
3. Attach a usb cable to a computer, download the factory image zip, then extract it
4. Once extracted, double click on "flash-all.bat," this will reflash every single component of the image to your phone and once it's done, will reboot and should boot as if nothing ever happened.
Click to expand...
Click to collapse
i got a corrupted image and still stuck on google logo.

Vio281 said:
i got a corrupted image and still stuck on google logo.
Click to expand...
Click to collapse
for anyone running into the same situation i did, I have to use the flash option on the google firmware page to get my phone working again, Thank god...

Related

[GUIDE] [SOLVED] "FAILED: ICS Update not working"

Read all instructions before beginning.
THIS IS NOT A GUIDE TO ROOTING, OR FOR DOWNGRADING TO .33 FROM ICS.
0. link a google account with your tablet if you have recently done a factory reset.
slayer69 said:
1. Extract the update zip on your computer.
2. Find the zip file in the extracted folders.
3. Copy that file to the root of your sd card.
4. Reboot.... Zip file will be detected after reboot.
5. . 33 update will install.
Click to expand...
Click to collapse
jfortier777 said:
Just to be clear...
You are downloading UpdateLauncher_US_epaduser8_8_3_33.zip
at
http://usa.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_Prime_TF201/#download
and extracting US_epad-user-8.8.3.33.zip
Then placing it in REMOVABLE/MICROSD/US_epad-user-8.8.3.33.zip
and then just reboot or wait for the system prompt and it will install .33
Click to expand...
Click to collapse
slayer69 said:
6. After reboot re root
7. Then use root keeper to save root
8. Install ics and enjoy.
9. Once done use root keeper to gain root again
10. Use root checker to verify
Click to expand...
Click to collapse
Thanks to everyone who helped sort this out and make sense of it.
I never new bloatware could be so dangerous.
DO NOT DELETE BLOATWARE IF YOU WANT TO RECEIVE OTA UPDATES IN THE FUTURE
kristovaher said:
Damn OP for making me think that unrooted people are also having update problems. I was panicking when I read through the first pages of this thread.
Nothing to worry about when you don't root and don't delete system apps.
Click to expand...
Click to collapse
My sincere apologies. *I did not want to garner any undue hostility to jcase or viperboy as the Root process was not at fault in any way.
It was only what we all happened to do once we had it. (deleting bloatware)
If you arent sure where the update goes after all this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Below maintained for archive only:
3 attempts so far and each time after the firmware downloads and the prime reboots, right after the Android with the gears shows up he turns into an android with an exclamation mark.
Then after a 5 minute boot I get a system message that says:
Post here if you failed too, and solutions you have.
Attempts:
first - Device was nachorooted, root backed up via OTA rootkeeper. FAILED
second - with root disabled via OTA rootkeeper FAILED
third - removed root via viperboy's tool FAILED
fourth - factory reset then update FAILED
fifth - just going to repeat the stock attempts until something looks different
No idea if this would work but maybe use that tool viperboy made to unroot yours and then try (pretty sure it has an unroot option)? Not sure why that would help since rooted users have successfully updated but may be worth a shot.
sorry forgot to mention that was my 3rd attempt
i'm on #4 now just doing a factory reset first.
Having this same issue. Not sure what the problem is, but it keeps failing.
I too am rooted.
Trying out this E4GT...
exact same thing happened to me, except I have no idea how to try to update again, when I go to about phone, system update, the check update box is greyed out.
How exactly do you factory reset on .33 with the .33 zip on asus's website?
Sent from my Galaxy Nexus using Tapatalk
method 4 failed as well, any ideas anyone?
How are ya'll able to try the update more than once? Are you just talking about reboot or are you actually downloading the update again? the reason I ask is that I am unable to click the check update button.
chris61292 said:
How exactly do you factory reset on .33 with the .33 zip on asus's website?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
its not exactly "factory" reset, but its a full wipe of settings and data.
like 5 attemps still failed..
factory reset, cold boot, reboot router, still failed.
johnnyutah22 said:
How are ya'll able to try the update more than once? Are you just talking about reboot or are you actually downloading the update again? the reason I ask is that I am unable to click the check update button.
Click to expand...
Click to collapse
I'm following what you mean.
edit:
when I click system firmware update the "check update button is grayed out but it just starts downloading in my tray automagically.
Rest all data, unrooted, still no luck. 4 failed attempts, not sure what would be any different from the rooted users that are able to update.
This is why you guys shouldnt have rooted knowing ICS was around the corner.
I too am getting failed. I used VipreMod to root and I've tried unrooting using said tool and also using the OTA root backup tool.
jdbaker82 said:
This is why you guys shouldnt have rooted knowing ICS was around the corner.
Click to expand...
Click to collapse
even unrooted ppl are having this prob. i think its more a bad firmware download than a root problem.
Sent from my Transformer Prime TF201 using xda premium
jdbaker82 said:
This is why you guys shouldnt have rooted knowing ICS was around the corner.
Click to expand...
Click to collapse
This does not have anything to do with root.
A number of fully rooted users have already updated.
I'm in the same boat, on my 3rd try downloading the update.
jfortier777 said:
This does not have anything to do with root.
A number of fully rooted users have already updated.
Click to expand...
Click to collapse
I was rooted updated with no problems. Got root back with rootkeeper
I cant update anymore.
Now I'm just getting "no update available"
jdbaker82 said:
This is why you guys shouldnt have rooted knowing ICS was around the corner.
Click to expand...
Click to collapse
Thank you, oh wise one, for this great tid-bit of knowledge

[Q] I have absolutely no signal

So, last night I decided to update to one of the CM 10.1 nightlies. I haven't updated in a while and thought why the heck not? So I used the option built in the Settings app to update. I pressed download and waited for it to finish, then hit install and went to sleep while it installed. When I woke up I had no signal. Not even 2g. No calls, texts, data, you name it. Gone.
So I have spent at least 6 hours re installing old versions and scouring the internet and no one has an issue exactly like mine.
Here's a screenshot of what the settings look like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This might be an obvious question but have you tried reflashing one of the available modems?
JBeXX said:
This might be an obvious question but have you tried reflashing one of the available modems?
Click to expand...
Click to collapse
Thanks for the quick reply. No I haven't tried that yet actually. I can't find anything on google. Could you point me in the direction to flashing a modem?
Lepryy said:
Thanks for the quick reply. No I haven't tried that yet actually. I can't find anything on google. Could you point me in the direction to flashing a modem?
Click to expand...
Click to collapse
Just flash in recovery. Probably best to use the newer which is the VRALL4. If this doesn't fix it you may want to try a clean flash with a full wipe.
http://forum.xda-developers.com/showthread.php?t=2108510
JBeXX said:
Just flash in recovery. Probably best to use the newer which is the VRALL4. If this doesn't fix it you may want to try a clean flash with a full wipe.
http://forum.xda-developers.com/showthread.php?t=2108510
Click to expand...
Click to collapse
Wait why would I use the VRALL4 and not the VRALLJB?
Lepryy said:
Wait why would I use the VRALL4 and not the VRALLJB?
Click to expand...
Click to collapse
It's the newer of the 2. It was part of the first vzw ota after release.
JBeXX said:
It's the newer of the 2. It was part of the first vzw ota after release.
Click to expand...
Click to collapse
Alright, here goes nothing. I'll post back the results.
JBeXX said:
It's the newer of the 2. It was part of the first vzw ota after release.
Click to expand...
Click to collapse
Umm. So it seems this update did a lot more than mess up my data. It completely wiped my Recovery and removed my Play Store completely. I have no way to even flash this modem.
Lepryy said:
Umm. So it seems this update did a lot more than mess up my data. It completely wiped my Recovery and removed my Play Store completely. I have no way to even flash this modem.
Click to expand...
Click to collapse
Very odd. What recovery were you using? I'm not on cm 10.1 so I'm not familiar with the updater but did it give you options to wipe any data or caches? And did you reflash gapps after updating?
If you can get a wifi connection you could always try and flash TWRP through the goo manager app. Just a thought.
JBeXX said:
Very odd. What recovery were you using? I'm not on cm 10.1 so I'm not familiar with the updater but did it give you options to wipe any data or caches? And did you reflash gapps after updating?
If you can get a wifi connection you could always try and flash TWRP through the goo manager app. Just a thought.
Click to expand...
Click to collapse
I get an error when using the goo manager app. It says no current recovery installed. I am seriously ****ing stuck. Just one harmless update has demolished all the stuff on my phone.
Lepryy said:
I get an error when using the goo manager app. It says no current recovery installed. I am seriously ****ing stuck. Just one harmless update has demolished all the stuff on my phone.
Click to expand...
Click to collapse
You should be able to install recovery from the goo app. Open the all, then hit menu, then install openrecoveryscript. Confirm and see if will flash it.
Had this problem many of times on a gs3.
Calm down, I may be able to help you.
In the settings picture you posted. The my phone number was out of sight.
If the spot said Unknown.
You may be in luck.
But anyways do this either way.
Make sure you back up any thing you don't want to lose.
Boot into download mode.
Flash a stock unrooted official version. I believe this will also flash the modems and radio as well.
Check your signal and phone settings now.
I would expect nothing has changed signal wise.
But if you still have problems you open up dialer and call this phone number
*2767*3855#
Now your phone will cook up some magic and everything will be like the day you opened the box
However if this does not work, I would consider a new sim card (free at Verizon), try and do some more research
Or accept the fact you may have a hardware problem.
Feel free to pm me to let me know how it goes.
God bless the American people.

[ROM][4.3][CM10.2][experimental][testers needed][8/4](wip)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Your warranty is now void.​
Untested build. I don't have the device. Someone with some balls please make a back up and give this a try and get back to me.
Any root issues http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
ROM: pulled
GAPPS: http://goo.im/devs/BaNkS/GApps%204.3
Thanks to the guys over at cyanogen, google, and uXylon. ​
Will have to give it a shot tonight
Sent from my SGH-I777 using Tapatalk 2
I flashed it, it booted into android fine but every time I selected start on the first setup screen it would reboot. Now I can't get into recovery, however I have a broken power button which might be causing complications. I'm working on getting back into recovery but this is an old phone so if I don't get it working, its no big deal.
s33d1ing said:
I flashed it, it booted into android fine but every time I selected start on the first setup screen it would reboot. Now I can't get into recovery, however I have a broken power button which might be causing complications. I'm working on getting back into recovery but this is an old phone so if I don't get it working, its no big deal.
Click to expand...
Click to collapse
Damn that is horrible. Power button doesn't work at all? Have you trye taking it apart and cleaning the contactors? What recovery do you have? Is there only one option? can you op to setup gapps later? You can always try using fastboot to get in there.
RBMacGregor said:
Damn that is horrible. Power button doesn't work at all? Have you trye taking it apart and cleaning the contactors? What recovery do you have? Is there only one option? can you op to setup gapps later? You can always try using fastboot to get in there.
Click to expand...
Click to collapse
I have taken the phone apart but I still couldn't get the power button to work. Anyhow, I just got everything restored and I'm going to try flashing it again. :laugh:
Okay, I just flashed the rom this time. It boots into android but when I try to open any app, the phone reboots.
s33d1ing said:
I have taken the phone apart but I still couldn't get the power button to work. Anyhow, I just got everything restored and I'm going to try flashing it again. :laugh:
Okay, I just flashed the rom this time. It boots into android but when I try to open any app, the phone reboots.
Click to expand...
Click to collapse
haha you have balls Ill give you that! Had me worried hate to brick someones device. Could you possibly logcat it? I think I need to change the tool chain compiling the kernel googles using 4.7 now and I'm not sure cyanogen is ready out of the box for it. Ill try with 4.6 tomorrow.
RBMacGregor said:
haha you have balls Ill give you that! Had me worried hate to brick someones device. Could you possibly logcat it? I think I need to change the tool chain compiling the kernel googles using 4.7 now and I'm not sure cyanogen is ready out of the box for it. Ill try with 4.6 tomorrow.
Click to expand...
Click to collapse
I cant get into settings to turn on usb debugging because the phone restarts every time I open settings. Is there any way to make a logcat in this situation?
s33d1ing said:
I cant get into settings to turn on usb debugging because the phone restarts every time I open settings. Is there any way to make a logcat in this situation?
Click to expand...
Click to collapse
See if you can download catlog and get the log that way for him.
Good luck.
Sent from the i777
I got a soft brick. Good thing I had a Jtag because I could not even get into download by button combination.
You may want to check and see if the i777 repo has even been updated to a useable state, as it had not been a few days ago when I last checked.
The kernel works but the ROM itself doesn't do much.
I have ported the CM 10.2 unofficial build pulled from GT-I9100 forum and I flashed it. All I can say is it worked fine but still is unstable..highly unstable. I used d default kernel and changed the modules and keypad script. It booted well and was fast. But phone heating issue and couple of FC's us what I encountered. And battery life issues.
Sent from my SGH-I777 using xda premium
AJ Newkirk said:
You may want to check and see if the i777 repo has even been updated to a useable state, as it had not been a few days ago when I last checked.
The kernel works but the ROM itself doesn't do much.
Click to expand...
Click to collapse
I had to make some changes to the i777 device tree to get it to build. Im gonna give it another go after work today.
twcobra said:
I got a soft brick. Good thing I had a Jtag because I could not even get into download by button combination.
Click to expand...
Click to collapse
**** soft brick? How the hell did that happen. Boot loader went off without a hitch.
RBMacGregor said:
**** soft brick? How the hell did that happen. Boot loader went off without a hitch.
Click to expand...
Click to collapse
Not sure what caused it. I had installed GAPPS with all the extras. Next time I try I will just install the ROM and the GAPPS core. Then the extra stuff one at a time. Believe me I started getting nervious when I could not get into download by button combo. I started breathing easy when I found my Jtag pluged it in and went rite to download on power up.
Anyone know why the rom was pulled?
Spinergy02 said:
Anyone know why the rom was pulled?
Click to expand...
Click to collapse
4.3.3 versions have TRIM Implementation ....and our devices aren't design for SSD overwrite deleted blocks
Sent from my SGH-M919 using xda premium
samprocat said:
4.3.3 versions have TRIM Implementation ....and our devices aren't design for SSD overwrite deleted blocks
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
TRIM would not be implemented on anything for our device. The SII version of CM10.2 and anything based off of CM10.2 trees would not contain TRIM.
I haven't made any calls but I sure hope I'm not having mic issues on 4.0 because voltage control is a really big deal to me and I don't want to upgrade.
Could someone explain why TRIM wouldn't be good for our devices?
RBMacGregor said:
**** soft brick? How the hell did that happen. Boot loader went off without a hitch.
Click to expand...
Click to collapse
I've had the same thing, doing pretty much nothing!
Fresh install, wiped everything, from system to memory card, plugged into USB transferring some files and BOOM, brick. Wipe again, reinstall, continue copying some files and brick again.
Needless to say I am sticking to 10.1 for a while longer.

[Q&A] [ROM][PORT][JB 4.1.2] Nabixus 0.1beta for Nabi 2

Q&A for [ROM][PORT][JB 4.1.2] Nabixus 0.1beta for Nabi 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I went and installed this Rom, and the Youtube App wont connect to the server, thus the videos wont play. It lets me log into the google account, but every video i try says "cant connect to server tap to retry"
Has anyone else had this issue?
eviltone97 said:
I went and installed this Rom, and the Youtube App wont connect to the server, thus the videos wont play. It lets me log into the google account, but every video i try says "cant connect to server tap to retry"
Has anyone else had this issue?
Click to expand...
Click to collapse
I hadn't noticed it until you mentioned it but, yeah, same problem here. I'm trying to figure out what the problem is.. For now you can uninstall the updates to the app and it will work.
**EDIT: It looks like a lot of people have been having this problem on lots of devices so I'm not sure what the deal is. I did find that if you keep tapping the video that it will eventually play...seems like if you play with it you can find a pattern that works relatively consistently. It's still annoying though.
Just quickly pinging this thread so I can find it later, since XDA refuses to consider a section for Fuhu's Android tablets.
Sent from my Nexus 10 using Tapatalk
Why not a thread for fuhu tablets?
Nabi 2 NAbixus 0.1beta questions!
I followed all the instructions to install this rom but it just stays in the boot screen that says nabi? any suggestions?
CarlosC88 said:
I followed all the instructions to install this rom but it just stays in the boot screen that says nabi? any suggestions?
Click to expand...
Click to collapse
How long did you wait? That first boot can take what seems like forever.
n3wt said:
How long did you wait? That first boot can take what seems like forever.
Click to expand...
Click to collapse
i left it about one hour, i also realized the twrp said no OS installed when i rebooted. not sure if thats a issue
CarlosC88 said:
i left it about one hour, i also realized the twrp said no OS installed when i rebooted. not sure if thats a issue
Click to expand...
Click to collapse
Yeah, something didn't go right...I'd try wiping and re-installing and if it still doesn't work then it might be a bad download.
n3wt said:
Yeah, something didn't go right...I'd try wiping and re-installing and if it still doesn't work then it might be a bad download.
Click to expand...
Click to collapse
i tried wiping and reinstalling. i noticed it said error when trying to install. and ideas?
CarlosC88 said:
i tried wiping and reinstalling. i noticed it said error when trying to install. and ideas?
Click to expand...
Click to collapse
Hmm, did it give any info about the error? Which version of TWRP do you have? Did you have the 2.4 nabi software or something else?
n3wt said:
Hmm, did it give any info about the error? Which version of TWRP do you have? Did you have the 2.4 nabi software or something else?
Click to expand...
Click to collapse
it has version 2.2.2.1.
basically its my friends son nabi tablet and he told me that he was just stuck on the boot logo . i figured i could just put it back to stock with a restore but i cant even do that,
error just basically says errror couldnt be installed
CarlosC88 said:
it has version 2.2.2.1.
basically its my friends son nabi tablet and he told me that he was just stuck on the boot logo . i figured i could just put it back to stock with a restore but i cant even do that,
error just basically says errror couldnt be installed
Click to expand...
Click to collapse
Oh, ok....so you tried to do a restore from a backup in TWRP?
n3wt said:
Oh, ok....so you tried to do a restore from a backup in TWRP?
Click to expand...
Click to collapse
I tried doing a restore to a stock rom, that didn't work.
I also tried just doing a install and that didn't work either.
Maybe I'm not putting the stock rom on the correct folder for restore?
CarlosC88 said:
it has version 2.2.2.1.
basically its my friends son nabi tablet and he told me that he was just stuck on the boot logo . i figured i could just put it back to stock with a restore but i cant even do that,
error just basically says errror couldnt be installed
Click to expand...
Click to collapse
2.2.2.1 is way too old. Will boot but won't work at all if the tablet was on Jellybean or higher.
aicjofs said:
2.2.2.1 is way too old. Will boot but won't work at all if the tablet was on Jellybean or higher.
Click to expand...
Click to collapse
What version do you recommend, and if you could give me a quick step by step tutorial on how to install it please
CarlosC88 said:
What version do you recommend, and if you could give me a quick step by step tutorial on how to install it please
Click to expand...
Click to collapse
I wish I knew what Nabi build you were on to begin with.
I would try this in order. Flash this in TWRP(Install tab)
http://forum.xda-developers.com/showpost.php?p=50431160&postcount=97
This has a more detailed log. If you see stuff in the log about not mounting, etc then it's not going to work. (Actually this is a good thing which means your bootloader is Jellybean)
If that doesn't work try this next. Install this in TWRP. This is what you are going to need to be on eventually anyway if you are trying to run a Jellybean port.
http://nabtabhacks.com/downloads/twrp-recovery-JBNV7AUS-271.zip (There are more recent versions as well I just gave you this one because I know for sure it works for Nabixus)
aicjofs said:
I wish I knew what Nabi build you were on to begin with.
I would try this in order. Flash this in TWRP(Install tab)
http://forum.xda-developers.com/showpost.php?p=50431160&postcount=97
This has a more detailed log. If you see stuff in the log about not mounting, etc then it's not going to work. (Actually this is a good thing which means your bootloader is Jellybean)
If that doesn't work try this next. Install this in TWRP. This is what you are going to need to be on eventually anyway if you are trying to run a Jellybean port.
http://nabtabhacks.com/downloads/twrp-recovery-JBNV7AUS-271.zip (There are more recent versions as well I just gave you this one because I know for sure it works for Nabixus)
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the Nabi 2 if that helps
I got this while trying to install/flash either one of those zip files you provided
CarlosC88 said:
I have the Nabi 2 if that helps
I got this while trying to install/flash either one of those zip files you provided
Click to expand...
Click to collapse
So either the update-binary in those zips are too new for 2.2.2.1 or you have the jellybean bootloader. How did you get 2.2.2.1 on there to begin with? What did you use?
aicjofs said:
So either the update-binary in those zips are too new for 2.2.2.1 or you have the jellybean bootloader. How did you get 2.2.2.1 on there to begin with? What did you use?
Click to expand...
Click to collapse
I didn't use anything, it was there already.

How to remove malware? (apk downloading automatically)

Hey guys,
A few days ago, I visited some site on chrome (on my RN3) and it opened a popup. I must've accidentally clicked on it or something and now there is a persistent automatic download of an apk file. It always gets stuck at 100% but the download never finishes. Maybe Chrome or MIUI8 is not allowing it to finish the download.
Since it's always stuck at 100% download, there is a PERSISTENT Chrome notification, which is VERY VERY ANNOYING!
Here's how it looks...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That notification NEVER goes away. It's clearly malware as I can't stop the download and no matter how many times I clear history (delete everything) in chrome, it always shows back up. I have also installed ESET antivirus and started a free trail, but even after a full system scan, it doesn't find anything. I am currently on Global Stable MIUI 8.0.6.0.
Please help me in getting rid of this completely. Any help in this regards would be highly appreciated.
Thanx a lot in advance. Desperately waiting for a reply
Sorry for your problem, as you've tried everything I would recommend to do, I think, maybe you've an app installed which is causing it.
BTW, which theme you're using? It's great.
AtomR said:
Sorry for your problem, as you've tried everything I would recommend to do, I think, maybe you've an app installed which is causing it.
BTW, which theme you're using? It's great.
Click to expand...
Click to collapse
I don't think I've installed any app. I went through all of the ones I've got installed, and they were there before this started happening.
By the way, here's the theme that am using
http://en.miui.com/thread-356377-1-1.html
Kazekage Gaara said:
Hey guys,
A few days ago, I visited some site on chrome (on my RN3) and it opened a popup. I must've accidentally clicked on it or something and now there is a persistent automatic download of an apk file. It always gets stuck at 100% but the download never finishes. Maybe Chrome or MIUI8 is not allowing it to finish the download.
Since it's always stuck at 100% download, there is a PERSISTENT Chrome notification, which is VERY VERY ANNOYING!
Here's how it looks...
That notification NEVER goes away. It's clearly malware as I can't stop the download and no matter how many times I clear history (delete everything) in chrome, it always shows back up. I have also installed ESET antivirus and started a free trail, but even after a full system scan, it doesn't find anything. I am currently on Global Stable MIUI 8.0.6.0.
Please help me in getting rid of this completely. Any help in this regards would be highly appreciated.
Thanx a lot in advance. Desperately waiting for a reply
Click to expand...
Click to collapse
Swipe down that notification with 2 fingers and tap cancel.
BlueJeans said:
Swipe down that notification with 2 fingers and tap cancel.
Click to expand...
Click to collapse
WOW! It actually worked. Thank you SO MUCH
I know it's a temporary fix but still that annoying notification is gone Thanx a lot man
Now to figure out what is triggering the download.
Kazekage Gaara said:
WOW! It actually worked. Thank you SO MUCH
I know it's a temporary fix but still that annoying notification is gone Thanx a lot man
Now to figure out what is triggering the download.
Click to expand...
Click to collapse
Actually it's not being "triggered" by something. It happens when you don't choose the "save" or "cancel" option while downloading from Chrome. Nothing to worry about. Just be cautious while browsing.
BlueJeans said:
Actually it's not being "triggered" by something. It happens when you don't choose the "save" or "cancel" option while downloading from Chrome. Nothing to worry about. Just be cautious while browsing.
Click to expand...
Click to collapse
It is being triggered bro. I clear my history in Chrome, use the Security App to clear trash, restart phone, and the download starts automatically as soon as the phone boots up, even without me going into chrome.
Edit: Alright, I got the issue solved. One of the members on the official MIUI forums suggested this...
Settings > Installed apps > long press on Chrome > clear data > reboot
This somehow removed the "trigger" and now after rebooting the phone, the apk stopped downloading automatically.
Now, I have another query. I want to install AdAway and that needs root access. I already have my bootloader unlocked officially.
The reason I am not rooting my phone is because I do not want to lose out on OTA updates. Is there a way to retain OTA updates and still have root access?
Kazekage Gaara said:
Now, I have another query. I want to install AdAway and that needs root access. I already have my bootloader unlocked officially.
The reason I am not rooting my phone is because I do not want to lose out on OTA updates. Is there a way to retain OTA updates and still have root access?
Click to expand...
Click to collapse
Install zcx recovery. You'll have to re-flash full recovery ROM for once to be able to flash OTA updates. This recovery automatically creates a backup of unmodified system and boot images and applies OTA updates normally.
@Kazekage Gaara
Check out [ZCX TWRP] thread!
Don't use it myself because on Xiaomi.eu rom.
Both of you guys are AWESOME! Thanx a lot I'll check out ZCX TWRP thread and report back in a couple of days. Got exams tomorrow
corkiejp said:
@Kazekage Gaara
Check out [ZCX TWRP] thread!
Don't use it myself because on Xiaomi.eu rom.
Click to expand...
Click to collapse
BlueJeans said:
Install zcx recovery. You'll have to re-flash full recovery ROM for once to be able to flash OTA updates. This recovery automatically creates a backup of unmodified system and boot images and applies OTA updates normally.
Click to expand...
Click to collapse
Guys, my Redmi Note 3 (Snapdragon) is on Android 5.1.1 (MIUI Global Stable 8.0.6.0). So, ZCX TWRP process will work on it, right?
Just confirming coz one of the moderators on MIUI forums told me to confirm before proceeding.
Kazekage Gaara said:
Guys, my Redmi Note 3 (Snapdragon) is on Android 5.1.1 (MIUI Global Stable 8.0.6.0). So, ZCX TWRP process will work on it, right?
Just confirming coz one of the moderators on MIUI forums told me to confirm before proceeding.
Click to expand...
Click to collapse
Yes, it'll work.
If you are visiting porn sites from your phone, stop it. Porn sites usually have ads that get triggered by anything. Else just get AdAway on your phone and browse whatever you want! No offence about the porn thing okay? @Kazekage Gaara
Hit Thanks if I Helped You!
Regards,
PoseidonKing
PoseidonKing said:
If you are visiting porn sites from your phone, stop it. Porn sites usually have ads that get triggered by anything. Else just get AdAway on your phone and browse whatever you want! No offence about the porn thing okay? @Kazekage Gaara
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Click to expand...
Click to collapse
AdAway is the ONLY reason am rooting my phone right now and no it wasn't a porn site
Kazekage Gaara said:
AdAway is the ONLY reason am rooting my phone right now and no it wasn't a porn site
Click to expand...
Click to collapse
Okay okay :laugh:
Reflash Stock via Recovery,
XN Logos said:
Reflash Stock via Recovery,
Click to expand...
Click to collapse
Okay, I just rooted my phone. Literally took five mins. I got SuperSU installed and the first thing I installed was AdAway.
As of right now, there are no OTAs available. And to enable OTAs, I need to download the full stock rom (Global Stable MIUI 8.0.6.0.) and flash it???
I have to do that once and after that OTAs will install as usual?
Guys, is it mandatory to flash full stock rom (Global Stable MIUI 8.0.6.0.)?
Edit: Done and Done. Followed the guide to the T and everything worked out PERFECTLY! Now waiting for OTAs
Thanx a lot for all the help guys. Really appreciate the effort

Categories

Resources