Related
hallow
my sm-n900p dead when playing with efs ...detecting qulecomm device in pc there are many unbrick image in forum i triead many of them but set is not on ..so if any on can make working image for me its very helpful for me
thanks
its very urgent
cdma-india said:
hallow
my sm-n900p dead when playing with efs ...detecting qulecomm device in pc there are many unbrick image in forum i triead many of them but set is not on ..so if any on can make working image for me its very helpful for me
thanks
its very urgent
Click to expand...
Click to collapse
Is the phone able to get into download mode? Is the phone detected in Odin?
no its not going to download mode , tried with boot jig also nowdownload,no recovery ,no boot , 100% boot dead i have all gagjets for repair dead boot riff,easy jtag ..many more but no one support n900p only solution is now unbrick sd card image
wating
thanks
just making thread up...some one please
here is method how to creat unbrick image plz try and upload to any safe place ,it require working n900p handset with cwm install
http://forum.xda-developers.com/showthread.php?t=2624203
How do you intend to write an img if the device won't go into download mode, recovery, or boot for that matter? Maybe look into returning your phone.
Anthonicia said:
How do you intend to write an img if the device won't go into download mode, recovery, or boot for that matter? Maybe look into returning your phone.
Click to expand...
Click to collapse
He doesn't need to boot into there to use a recovery sdcard. Me, @noobtoob, @msmercy42, and others (very sorry for those I forgot to mention, I have a very limited memory!!!) took tricks that the N900A guys got for a hard brick solution and came up with one for the N900T. Now, we're assuming this can be ported out to all other N900X variants but this still has yet to be tested. It involves grabbing about 200MB from mmcblk0 and writing it to an sd card. Not just copying it, but doing a raw write of the image file to an sdcard via the dd if command in either terminal emulator or a Linux OS environment.
If someone here has a N900P, I'd be glad to walk them through the process of creating a unbrick image for the OP. It copies over bootloader information to boot from the SD card, not the device. NO SENSITIVE EFS INFORMATION IS COPIED!!! This method has been done enough times to say that at least. .
OP: when you plug your device into your computer do you at least get a QCHSUSB port or the notification that a device has been recognized by Windows? If so, this method should work. If not, you may have a hardware fault.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
I will do it since I'm here already. Have to go to the post office but will be back and ready in about an hour. What all do I need to have?
Anthonicia said:
I will do it since I'm here already. Have to go to the post office but will be back and ready in about an hour. What all do I need to have?
Click to expand...
Click to collapse
thanks man
u required
1)working n900p handset with cwm installed
2)download
http://forum.xda-developers.com/show....php?t=2624203 (Unbrick-Creator)
3)run via cwm
4)software will creat one image file
5)send link of that file
as simple as it is
Just waiting for it to upload and I will pm you a link.
thanks man
u required
1)working n900p handset with cwm installed
2)download
http://forum.xda-developers.com/show....php?t=2624203 (Unbrick-Creator)
3)run via cwm
4)software will creat one image file
5)send link of that file
as simple as it is
Sent it to u via pm. Let us know if it works.
Wow work in first shot u r great
thanks again
u saved my phone
That's great! Glad to help.
Why not post so everyone can have the image in case of brick? I've been looking for this to have as a backup just in case
Sent from my SM-N900P using xda app-developers app
evilvoice said:
Why not post so everyone can have the image in case of brick? I've been looking for this to have as a backup just in case
Click to expand...
Click to collapse
You can make your own if you follow the link op posted in his instructions.
So...will SOMEONE post a working image? Lol. I don't have a N900P but I'd like to keep a running archive of unbrick images (in addition to space hogging firmwares) in my mediafire account to post links to. This way it'll keep the consistency of image size and contents; and most importantly people won't need to wait for it to be generated/uploaded.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
ecs87 said:
So...will SOMEONE post a working image? Lol. I don't have a N900P but I'd like to keep a running archive of unbrick images (in addition to space hogging firmwares) in my mediafire account to post links to. This way it'll keep the consistency of image size and contents; and most importantly people won't need to wait for it to be generated/uploaded.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
I cannot upload the actual file because it is too big (52mb). I sent you a pm. If you can upload it to a file share site and post it here that's cool. Just don't like uploading it from personal dropbox, they don't like me posting files to public sites for some reason.
Anthonicia said:
I cannot upload the actual file because it is too big (52mb). I sent you a pm. If you can upload it to a file share site and post it here that's cool. Just don't like uploading it from personal dropbox, they don't like me posting files to public sites for some reason.
Click to expand...
Click to collapse
I had a Derpbox before. Hated it. Ran out of bandwidth within the first week of posting the L900 MK4 Odin file...psch. Switched to Mediafire and never looked back. Thanks for the file by the way. Got it hosted and here it is: https://www.mediafire.com/?8bruhax81uud9dj
Please need some help hard bricked and soft bricked
Hi guys I'm trying to unbrick my galaxy note 3 on mj4 I used above image had to add the .tar.img anyways I wrote it to a 8gb sd card and also a 64gb sd card both didn't work my phone is hard bricked and hard bricked because it stays stuck on the Samsung galaxy note 3 screen and when going in to recovery it says what the OP said and then mine keeps trying to root the phone with cf auto root every time I got lol in to recovery it does the same thing when I go in to download mode my computer doesn't recognize it I think it said unrecognized device so I can't flash anything with Odin any help is much appreciated as well as a donation
Well I'm stuck with a black screen.....nothing. I know I can send it in for jtag but this is my daily driver so I'm hesitant and need it running soon. I was running stang5litre's oc1 rom and tried to flash gigilies port of albe96's super6 v1.87 ROM. I followed instructions to the T. I wiped then installed through flashfire. That could have been the problem but it was supposedly tested with it so idk. Any way I could fix with an sdcard or something? Thanks in advance!!!
Can you get into download mode?
Hold down the volume down, Home key, and Press and Release power
Sent from my SCH-I545 using Tapatalk
No sir completely hard bricked.
Will it turn on at all?
BtoGS488 said:
Will it turn on at all?
Click to expand...
Click to collapse
No sir won't do anything.
Although when I plug it in it says searching for drivers for qhusb_dload. But after awhile it says that this device has malfunctioned.
turn it off again, hold Vol- and power.... (release power when screen light up) still nothing?
No sir but I meant when I plug it into the computer the computer says that.
That's really not good at all. I think JTAG repair is the only hope.
ToastyZ71 said:
That's really not good at all. I think JTAG repair is the only hope.
Click to expand...
Click to collapse
OK thankyou. I was afraid that was what I was gonna have to do. But I still have hope for some kind of sdcard repair. Lol
hard bricked I545 also!
Looking to see if theres a SD Card method before I have to look into getting it JTagged. I dont know anything of how or what firmware it has but its a friends phone and he doesnt even know how it hardbricked. I've been trying to read before I posted anything so this is where im at as I am a newb lol.
I have win32diskimager. I need a debrick img for sch-I545. I also have a 32gb class 10 microsd card.
I'm guessing I get the img, write it to the sd using win32disk. put it in phone, then try to power on correct?
I got a debrick img somewhere on xda, but it was labeled backup.bin, and I didnt really know how to convert it to .img correctly nor do i know how to check if its been written properly?
Any help would be awesome! thank you
dougfunnieyo said:
Looking to see if theres a SD Card method before I have to look into getting it JTagged. I dont know anything of how or what firmware it has but its a friends phone and he doesnt even know how it hardbricked. I've been trying to read before I posted anything so this is where im at as I am a newb lol.
I have win32diskimager. I need a debrick img for sch-I545. I also have a 32gb class 10 microsd card.
I'm guessing I get the img, write it to the sd using win32disk. put it in phone, then try to power on correct?
I got a debrick img somewhere on xda, but it was labeled backup.bin, and I didnt really know how to convert it to .img correctly nor do i know how to check if its been written properly?
Any help would be awesome! thank you
Click to expand...
Click to collapse
First off if your friend didn't do any type of modding or flashing then the problem could be that the power button is stuck in the open position and you may need to get that replaced.
But if it hardbricked during a flash or something of that sort then The sdcard has to be the same amount as phone storage. So if you have the 32gb then in theory that would work. But if you have 16gb phone you would need a 16gb sdcard. I haven't had any luck but I don't have a class 10 sdc so that's probably the problem. Also from the videos ive watched on youtube (so i could be wrong) you don't need to change the file to img just click on the bottom right corner when you are searching for the file press where it say ".img" ".IMG" and change it to "." Then you will be able to find the backup.bin file. Then me know if this helps and or if it worked then I may have to buy myself a class 10 sdc. Thanks
nathancarlile said:
First off if your friend didn't do any type of modding or flashing then the problem could be that the power button is stuck in the open position and you may need to get that replaced.
But if it hardbricked during a flash or something of that sort then The sdcard has to be the same amount as phone storage. So if you have the 32gb then in theory that would work. But if you have 16gb phone you would need a 16gb sdcard. I haven't had any luck but I don't have a class 10 sdc so that's probably the problem. Also from the videos ive watched on youtube (so i could be wrong) you don't need to change the file to img just click on the bottom right corner when you are searching for the file press where it say ".img" ".IMG" and change it to "." Then you will be able to find the backup.bin file. Then me know if this helps and or if it worked then I may have to buy myself a class 10 sdc. Thanks
Click to expand...
Click to collapse
Ya he works for verizon so im guessing he did or tried to flash something. He said it was hardbricked but didnt say how or what he did. I was able to write to the card changing IMG to . allowing me to choose the bin file. The phone didn't boot up or anything, could be wrong debrick img? wish I had different ones to try. This looks like it could be leaning to a JTAG repair, but I still have hope with the SD method.
I have the debrick image for gs4 oc1 I made it from another gs4 thru terminal if you would like me to upload.
nathancarlile said:
I have the debrick image for gs4 oc1 I made it from another gs4 thru terminal if you would like me to upload.
Click to expand...
Click to collapse
sure! definitely, anything is worth a shot at this point. Thank you
nathancarlile said:
I have the debrick image for gs4 oc1 I made it from another gs4 thru terminal if you would like me to upload.
Click to expand...
Click to collapse
please upload the file, i need it my i545 is getting hardbrick
thanks before
i have vwz GS4 i try to unlock boot loader using EZ-unlocker that hard brick my device .neeed help to brind it back to life kindly upload debrick img and procedure
Same exact problem happened to me. All the way down to flashing the same ROM. I believe my battery popped out while flashing with FF, once I put it back in my phone wouldn't turn on. I'm in a bit of a panic over here :/
Unlocked to bricked
You can not unlock the boot loader there is no method yet to do so. I wonder if some of you have drained you battery & that's why it won't boot up to at least down loading screen. Try plugging it in to a charger for 1/2 hour or so then try.
If you can get to down loading screen you can hook id to computer & load the stock firmware with Odin.
traco1 said:
You can not unlock the boot loader there is no method yet to do so. I wonder if some of you have drained you battery & that's why it won't boot up to at least down loading screen. Try plugging it in to a charger for 1/2 hour or so then try.
If you can get to down loading screen you can hook id to computer & load the stock firmware with Odin.
Click to expand...
Click to collapse
i try with new battery full charged but still no sign of life in it after using ez-unlocker to unlock boot loader and pc wont detect:silly::crying: any thing when i connect phone with it
nathancarlile said:
Well I'm stuck with a black screen.....nothing. I know I can send it in for jtag but this is my daily driver so I'm hesitant and need it running soon. I was running stang5litre's oc1 rom and tried to flash gigilies port of albe96's super6 v1.87 ROM. I followed instructions to the T. I wiped then installed through flashfire. That could have been the problem but it was supposedly tested with it so idk. Any way I could fix with an sdcard or something? Thanks in advance!!!
Click to expand...
Click to collapse
funny i just did the opposite I bricked flashing stang's new 2.0 on my OC1 OTA phone (got it for cheap after the update) just had rooted it and flashed my gDux to it no problems then flashed stang's and bam. the issue resides in the fact that when I made the OP for Super6 it was based on my downgrading to 4.42 Kernel then using Safestrap. Which a kernel flash has to have the -orig tag at the end of the block in order to flash over the stock kernel. This means that if your on OC1 and you flash a ROM you must not flash a kernel and if you do on accident you need to pull the battery before the install finishes and if thats not possible hold the vol down button in hopes of getting to download mode before trying to boot the phone or it will brick. so if your going to try and flash Stang 2.0 don't use his FF instructions the only time you need to flash a kernel in FF is if your upgrading with mdk, or Safestrap is installed on the phone. otherwise make sure the block for the kernel doesnt have the -orig because that wont work obviously. sucks Im usually more careful when flashing other's releases. if someone has the OTA installed and bootloaders at 5.0 an SD .img for debricking would be useful could someone please zip a result of this command from terminal in the Stock ROM:
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1048576 count=128
if you zip the .img you'll save a lot of bandwidth. I'd like to try and attempt to revive via sdcard (doubt its possible I didnt have luck with NK and an SD) but if nothing else theres been some improvements the qhs_usb department it might be possible to force write the debrick.img I'll do some investigating but if anyones already fixed this issue please let me know
First, I flashed TWRP with Fire OS 4.5.3, (I downgraded from 5.0 with the 4.5.3 bin) then I installed a cm11 rom, and then flashed back to 4.5.3. I decided I didn't want to root it, so I decided to update via OTA, and when it finished installing the update, it simply restarted, and just shows an empty screen. (The screen isn't even on) The update was listed as Fire OS 4.5.5, and since it's in an OTA, I don't know why it (probably) bricked. Any help on this? (Or on WHY the update bricked my Kindle)
Thanks in Advance
Help
hi, i have the same exact problem with my kindle fire hd 6 (4th gen) and from what i have read it says you have to download sp-flash tools, and the rom which includes the scatter file.After downloading these you have to format and flash the kindle with the sp-flash tool.
I tried this with my phone(blu advance 4.0)and it works perfectly.
If by any chance you find the rom with the scatter file in it please let me know thx.
kyle12345109876 said:
hi, i have the same exact problem with my kindle fire hd 6 (4th gen) and from what i have read it says you have to download sp-flash tools, and the rom which includes the scatter file.After downloading these you have to format and flash the kindle with the sp-flash tool.
I tried this with my phone(blu advance 4.0)and it works perfectly.
If by any chance you find the rom with the scatter file in it please let me know thx.
Click to expand...
Click to collapse
I simply got another kindle back, but what you said is true. Since it uses an MTK chinese chipset, you can use SP Flash Tools to unbrick it. Thing is, nobody was able to get the firmware into a scatter file format. And you'd most likely need to remove the battery, which means you'd need to open it up. If anyone experienced sees this, I hope they can somehow change the firmware format to a format SP Flash Tools can recognise.
Kindle fire HD 7
Gimzie said:
I simply got another kindle back, but what you said is true. Since it uses an MTK chinese chipset, you can use SP Flash Tools to unbrick it. Thing is, nobody was able to get the firmware into a scatter file format. And you'd most likely need to remove the battery, which means you'd need to open it up. If anyone experienced sees this, I hope they can somehow change the firmware format to a format SP Flash Tools can recognise.
Click to expand...
Click to collapse
Yea that's true, hopefully someone will get the correct firmware needed
kyle12345109876 said:
Yea that's true, hopefully someone will get the correct firmware needed
Click to expand...
Click to collapse
We have the firmwares, but we need them in a file format that SP Flash Tools will recognize, and that would fix a LOT of bricks.
I bricked mine after flashfire got stuck and didnt finish flashing CM 12.1. I have been toying around with the sp flash tool. The chip is MT8127. I am working on building a scatter file. If I have any success I will let everyone know.
junglistknot said:
I bricked mine after flashfire got stuck and didnt finish flashing CM 12.1. I have been toying around with the sp flash tool. The chip is MT8127. I am working on building a scatter file. If I have any success I will let everyone know.
Click to expand...
Click to collapse
Any updates?
bricked mine today
So the cpu is MT65xx as is detected in winows or MT8139 as in the specs page on amazom?
Drevenu said:
bricked mine today
So the cpu is MT65xx as is detected in winows or MT8139 as in the specs page on amazom?
Click to expand...
Click to collapse
Fire HD 6 is actually MT8135.
I have a bricked Fire HD 6 that I want to fix for a friend. I have a lot of experience with SPFT and if someone can PM me who has a working Kindle then I can make a scatter for them. I can't make a scatter or anything because the Kindle doesn't even boot the screen.
It's detected by the PC tho, I just need a scatter file and the TWRP and then I'm good.
Help me help you
@sd_shadow
kirito9 said:
Fire HD 6 is actually MT8135.
I have a bricked Fire HD 6 that I want to fix for a friend. I have a lot of experience with SPFT and if someone can PM me who has a working Kindle then I can make a scatter for them. I can't make a scatter or anything because the Kindle doesn't even boot the screen.
It's detected by the PC tho, I just need a scatter file and the TWRP and then I'm good.
Help me help you
@sd_shadow
Click to expand...
Click to collapse
I could not find the scatter file, searched periodically ever since i posted
Drevenu said:
I could not find the scatter file, searched periodically ever since i posted
Click to expand...
Click to collapse
Neither could I, I'm not sure if it can't be created that's why we're not seeing it.
Do you know anyone with a working Fire HD 6?
Drevenu said:
I could not find the scatter file, searched periodically ever since i posted
Click to expand...
Click to collapse
You do not need a scatter file (it does not work!). Instead, follow these instructions :
http://forum.xda-developers.com/fire-hd/development/unbrick-fire-hd-6-7-flashing-lollipop-t3405797
Damn! You just gave me some hope ! Thanks!
Hi everyone i have a problem (not only me). I think erased bootloader I tried a lot of ways to restore but nothing helped((( the only one in my opinion is the option to using usb burning tool (like mdz-16 JurassicPark) but I do not have the firmware and i cant find it((( So someone know where i can find it? Or someone can to make it? thanks
danilatrip said:
Hi everyone i have a problem (not only me). I think erased bootloader I tried a lot of ways to restore but nothing helped((( the only one in my opinion is the option to using usb burning tool (like mdz-16 JurassicPark) but I do not have the firmware and i cant find it((( So someone know where i can find it? Or someone can to make it? thanks
Click to expand...
Click to collapse
Such an .img file does not exist. Your only solution is to use recovery mode and flash a current update.zip file.
bigtalker said:
Such an .img file does not exist. Your only solution is to use recovery mode and flash a current update.zip file.
Click to expand...
Click to collapse
how to use recovery mode if the box does not turn on and therefore does not go into recovery?
And you leave out this trivial detail, hoping for a miracle.
Based on that, it is clearly dead, gone, vermisht, machula, muerto, chugoseyo.....
woops didn't put this in guides, sorry
This should work for any KDZ firmware of any LG Device, but figured I'd write this for the Wing, as so far, its the only LG phone I own and the one I'm most determined with
This is not a full Root Tutorial. This is a step in the correct direction though. These are the After-Steps, so bootloader unlock is still needed. Sorry
What You'll need
- KDZ Tools (see attachment -- virus total scan just because: https://www.virustotal.com/gui/file...zODc2ZTViOWQ1MTlmN2Q0NzFiMjI6MTYzNzgyMTYwNg==)
- Firmware KDZ file
- Magisk Manager installed on device that IS NOT your LG Wing (at least for me, explained below)
Instructions (video coming soon)
1.) Download KDZ Tools and extract them to a folder somewhere.
-- I usually make one on my external drive and drop stuff there, but desktop works too
2.) Download whatever firmware KDZ file you need
3.) Put that KDZ File in the same folder as the KDZ Tools
4.) Run "OneKeyExtraction.bat" and select Y if the KDZ is in the folder with this same file
5.) This takes A LONG WHILE and you need a good large bit of storage space available (50gb+) because the extraction goes raw format and some image files at first take up 20+GB as 1 file
6.) Once complete, you should have a folder named "F100X_usersigned_etc" ... open that to find your img firmware files. There's 31GB of IMG files here if its the Android 11 1020 KR FW
7.) Copy one of the boot.img to your device with Magisk Manager installed
-- The reason I stated on a different device, is that at least for me, Magisk Manager kept failing to patch on my LG Wing. When I put the boot.img on my OnePlus 7 Pro 5G, it patched just fine
8.) Open magisk manager, select Install, Select and Patch a File, select the Boot.img and patch it
9.) Once patched, that's a rooted boot.img, pull it off your device back to your computer and hold on to it for when we get a way to flash it and root the device!
root theory:
Interupting the LGUp flashing process of firmware when it gets to boot partitions to load custom boot.img's. How to do this exactly, not sure. If there's a way we can re-kdz these files from KDZ tool, that might work too
I can tell you right now, it wont work because the bootloader is locked. The hash of the patched boot.img on the phone won't match and you will get "Your device has failed a routine check, your phone is unbootable."
Sorry to debunk your theory. We need a firehose and a engineering bootloader.
Leronex_1 said:
I can tell you right now, it wont work because the bootloader is locked. The hash of the patched boot.img on the phone won't match and you will get "Your device has failed a routine check, your phone is unbootable."
Sorry to debunk your theory. We need a firehose and a engineering bootloader.
Click to expand...
Click to collapse
hey it was worth a shot
KaptinBoxxi said:
hey it was worth a shot
Click to expand...
Click to collapse
Sure need lg wing firehose , can help to find it??
Bahmale said:
Sure need lg wing firehose , can help to find it??
Click to expand...
Click to collapse
Don't even have a clue of where to look so I won't be looking for it
i've done it with
"adb reboot fastboot
adb flash boot_a boot_a.img
adb flash boot_b boot_b.img"
both boot img a & b patched with magisk and by the way the phone i bought come with unlocked bootloader
mercuris said:
i've done it with
"adb reboot fastboot
adb flash boot_a boot_a.img
adb flash boot_b boot_b.img"
both boot img a & b patched with magisk and by the way the phone i bought come with unlocked bootloader
Click to expand...
Click to collapse
you got a rare device then. I can't even load fastboot, just download mode for lgup.
mercuris said:
i've done it with
"adb reboot fastboot
adb flash boot_a boot_a.img
adb flash boot_b boot_b.img"
both boot img a & b patched with magisk and by the way the phone i bought come with unlocked bootloader
Click to expand...
Click to collapse
What model do you have? I.e. F100VM10i
Glad you got it working btw!
kaluna00 said:
What model do you have? I.e. F100VM10i
Glad you got it working btw!
Click to expand...
Click to collapse
screen shot in another section shows it was a verizon demo model by the looks of it. F100V
KaptinBoxxi said:
screen shot in another section shows it was a verizon demo model by the looks of it. F100V
Click to expand...
Click to collapse
This is from the Verizon model (non demo).
Also i accidentally added the software version earlier.
i accidentally delete some lg apps and the phone stuck in bootloop the other day so i restore the phone using lgup just selected the refurbished option, the phone restored still in unlocked bootloader mode
mercuris said:
i accidentally delete some lg apps and the phone stuck in bootloop the other day so i restore the phone using lgup just selected the refurbished option, the phone restored still in unlocked bootloader mode
Click to expand...
Click to collapse
Hi, are you willing to dump the bootloader from your phone? Because it looks like you have a development device, so it has an unlockable engineering bootloader that can be used to unlock other LG Wing and Velvet devices.
Wish39 said:
Hi, are you willing to dump the bootloader from your phone? Because it looks like you have a development device, so it has an unlockable engineering bootloader that can be used to unlock other LG Wing and Velvet devices.
Click to expand...
Click to collapse
i dun mind just i dunno how to do that, if you can guide me it would be nice, or you can show me the instructions
mercuris said:
i dun mind just i dunno how to do that, if you can guide me it would be nice, or you can show me the instructions
Click to expand...
Click to collapse
Others can help on our discord server, I'll admit I'm not well versed on dumping partitions through stuff like ADB.
https://discord.gg/Zw9Uk9DWE2
mercuris said:
i dun mind just i dunno how to do that, if you can guide me it would be nice, or you can show me the instructions
Click to expand...
Click to collapse
You can also contact @Leronex_1 he can help you with dumping the bootloader
will do what i can to contribute, no problem
mercuris said:
will do what i can to contribute, no problem
Click to expand...
Click to collapse
Thanks, I recommend to join the Discord server though since me and Leronex are not always online on XDA, we are more active on Discord since its a live chat platform, not a forum like XDA. If you dont have a Discord account you can just create one.
If anyone else is reading this you are welcome to join the server as well.
Wish39 said:
Thanks, I recommend to join the Discord server though since me and Leronex are not always online on XDA, we are more active on Discord since its a live chat platform, not a forum like XDA. If you dont have a Discord account you can just create one.
If anyone else is reading this you are welcome to join the server as well.
Click to expand...
Click to collapse
will do
kaluna00 said:
This is from the Verizon model (non demo).
Also i accidentally added the software version earlier.
Click to expand...
Click to collapse
Reason I guessed demo device is because of the 0'd IMEI, but I guess as a dev device, 0'd imei is gonna be there too
Any progress on this? Sounded like you guys were making some good ground and then the thread went a little bit cold. No pressure. Just checking in. Thanks and Merry Christmas!