I have a Unisoc UMS512 chipset device.
I can't unlock bootloader.
I do this link : https://forum.hovatek.com/thread-32287.html
But I take this error.
"
downloading 'unlock_message'...
OKAY [ 0.001s]
unlocking bootloader...
FAILED (remote: Unlock bootloader fail.)
finished. total time: 0.101s
"
What should I do ?
Please help me, Thanks
(Sorry my bad english)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UP UP UP. I need a help
I have unlocked my Motorola G20 with Unisoc T700 chipset with fastboot easily - without signature.bin. Then I had to follow instructions on the device to unlock. Try another USB 2.0 port and another cable too.
BASKAN53 said:
I have a Unisoc UMS512 chipset device.
I can't unlock bootloader.
I do this link : https://forum.hovatek.com/thread-32287.html
But I take this error.
"
downloading 'unlock_message'...
OKAY [ 0.001s]
unlocking bootloader...
FAILED (remote: Unlock bootloader fail.)
finished. total time: 0.101s
"
What should I do ?
Please help me, Thanks
(Sorry my bad english)
View attachment 5516217
View attachment 5516219
Click to expand...
Click to collapse
try out my post to see if it helps
Alldocube T803 Smile_1 Bootloader unlock w/ Unisoc T310
All files can be downloaded from the iplay40 tread. MUST use iPlay40 fastboot version or else it will fail using commands. Download install SpreadTrumTools-20200317.apk run command -- adb shell getprop ro.serialno Enter the serial you get from...
forum.xda-developers.com
Thread is up
I have same issue when I try to unlock bootloader of Infinix hot 11 unisoc t610 processor phone ..
Can someone help me out with this...
srinidroid said:
I have same issue when I try to unlock bootloader of Infinix hot 11 unisoc t610 processor phone ..
Can someone help me out with this...
Click to expand...
Click to collapse
I also have this device, did you find anything new aboutt unlocking?
jovisense said:
I also have this device, did you find anything new aboutt unlocking?
Click to expand...
Click to collapse
No :/
BASKAN53 said:
No :/
Click to expand...
Click to collapse
Hm i noticed that the icons on status bar is very close to edge, do u know any workaround?
BASKAN53 said:
UP UP UP. I need a help
Click to expand...
Click to collapse
Robyn_232 said:
I have unlocked my Motorola G20 with Unisoc T700 chipset with fastboot easily - without signature.bin. Then I had to follow instructions on the device to unlock. Try another USB 2.0 port and another cable too.
Click to expand...
Click to collapse
can you tell me pls how you have unlocked the bootloader of your unisoc without signature.bin?
By using fastboot.
fastboot flashing unlock_bootloader
I used this command:-
$ fastboot oem get_identifier_token
And got this in return:-
(bootloader) Identifier token:
(bootloader) 30303231364437303141323630393233
(bootloader) 313041413031424e
OKAY [ 0.022s]
Finished. Total time: 0.023s
What should I do next?
at next forget about what you have done and type: fastboot flashing unlock_bootloader
this is how i did it...
Robyn_232 said:
at next forget about what you have done and type: fastboot flashing unlock_bootloader
this is how i did it...
Click to expand...
Click to collapse
tried that didn't work
enable oem unlocking in developer settings
Robyn_232 said:
enable oem unlocking in developer settings
Click to expand...
Click to collapse
Don't you think I did it?
Got the same problem, seems like private key not working anymore for new devices
vanelizarov said:
Got the same problem, seems like private key not working anymore for new devices
Click to expand...
Click to collapse
What did you try?
Related
hi i chang my buile number from kw-l21 c185b130 to kiw-l21c10b130 and iemi be unknow and bootloader be lock again when i want unlock it i get that
C:\Minimal ADB and Fastboot>Fastboot oem unlock 1611102252271022
...
FAILED (remote: Invalid key,unlock fail)
finished. total time: 0.009s
so i need a way to unlock or root ,fix imei
help pz
faramarzq said:
hi i chang my buile number from kw-l21 c185b130 to kiw-l21c10b130 and iemi be unknow and bootloader be lock again when i want unlock it i get that
C:\Minimal ADB and Fastboot>Fastboot oem unlock 1611102252271022
...
FAILED (remote: Invalid key,unlock fail)
finished. total time: 0.009s
so i need a way to unlock or root ,fix imei
help pz
Click to expand...
Click to collapse
Tried force updating the stock KIW-L21C185 rom ?
U need a key from huawei site not your imei
Demian3112 said:
U need a key from huawei site not your imei
Click to expand...
Click to collapse
In order to get the key from Huawei site he needs a valid IMEI.
Try your Sim Tray slot it has An Imei that worked for me.
cosminvr27 said:
In order to get the key from Huawei site he needs a valid IMEI.
Click to expand...
Click to collapse
I get code before but code dont worke now
faramarzq said:
I get code before but code dont worke now
Click to expand...
Click to collapse
What recovery is installed on the phone now? Custom or stock ?
cosminvr27 said:
What recovery is installed on the phone now? Custom or stock ?
Click to expand...
Click to collapse
stock
cosminvr27 said:
What recovery is installed on the phone now? Custom or stock ?
Click to expand...
Click to collapse
faramarzq said:
stock
Click to expand...
Click to collapse
I already explained it here >> http://forum.xda-developers.com/showpost.php?p=67962457&postcount=12
you'll have to jtag or return the phone to honor for repair as their is no way to flash your correct oeminfo / efs1 / efs2 with a locked bootloader
clsA said:
I already explained it here >> http://forum.xda-developers.com/showpost.php?p=67962457&postcount=12
you'll have to jtag or return the phone to honor for repair as their is no way to flash your correct oeminfo / efs1 / efs2 with a locked bootloader
Click to expand...
Click to collapse
But isn't it possible to try and force flash a rooted Version of the stock rom ?
cosminvr27 said:
But isn't it possible to try and force flash a rooted Version of the stock rom ?
Click to expand...
Click to collapse
I'm pretty sure any fastboot flash will fail with a locked bootloader
Can I extracted ru rom update.app and replace c 185 modem file in that and flash wite local update
I think I would try downloading the latest update direct from Huawei and load it with the DLOAD folder update trick.
I'm not sure what you were trying to accomplish, but generally speaking.... you download the UPDATE.APP file and place it on your internal storage. Hold down both volume buttons with power until the phone boots to a black screen that says "updating"
For future reference, always backup your partitions before messing with them.
hi i find a way to restore my imei but how write its here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dead_Dude said:
I think I would try downloading the latest update direct from Huawei and load it with the DLOAD folder update trick.
I'm not sure what you were trying to accomplish, but generally speaking.... you download the UPDATE.APP file and place it on your internal storage. Hold down both volume buttons with power until the phone boots to a black screen that says "updating"
For future reference, always backup your partitions before messing with them.
Click to expand...
Click to collapse
it won't work because his phone has been changed to a different region and now bootloader locked
and both old and new region updates fail
clsA said:
it won't work because his phone has been changed to a different region and now bootloader locked
and both old and new region updates fail
Click to expand...
Click to collapse
I dont know but I chang my imei wite that I nust dont know how enter my owen imei
[SORTED OUT]
By fastboot gives the following error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and rsd lite
Does anyone know how to fix this error?
Looks like you forgot unblock your bootloader.
When I try to unlock the bootloader of this error
Can you solve this error with some command? Because the phone does not turn on.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flashing unlock
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer
(bootloader) Options.
OKAY [ 0.017s]
finished. total time: 0.019s
rodrigofvl said:
When I try to unlock the bootloader of this error
Can you solve this error with some command? Because the phone does not turn on.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flashing unlock
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer
(bootloader) Options.
OKAY [ 0.017s]
finished. total time: 0.019s
Click to expand...
Click to collapse
Check screen while in bootloader. Is there green text "flashing unlock"? Or smth similar.
Try another ROM. My Moto (chinese) flash and boot only on TELUS 25.86-30.
Defaultnickname said:
Check screen while in bootloader. Is there green text "flashing unlock"? Or smth similar.
Try another ROM. My Moto (chinese) flash and boot only on TELUS 25.86-30.
Click to expand...
Click to collapse
this flashing_locked
Can you boot into recovery? Try factory reset through recovery. If there a bootloop, flash recovery, via
Fastboot flash recovery.img
Should work with locked bt and stock recovery.
Defaultnickname said:
Can you boot into recovery? Try factory reset through recovery. If there a bootloop, flash recovery, via
Fastboot flash recovery.img
Should work with locked bt and stock recovery.
Click to expand...
Click to collapse
rodrigofvl said:
Click to expand...
Click to collapse
Look at this thread:
https://forum.xda-developers.com/2015-moto-g/help/updated-moto-3-2015-stuck-bootloop-to-t3485191
did not work
SOLUTION FOR THE PROBLEM
Failure to install rom Moto Z XT1650-05 Sheridan Chinese.
https://forum.xda-developers.com/mo...-xt1650-05-t3695286/post74498676#post74498676
As I did not get able to install another rom or recover the one that was installed because of the blocked bootloader and the OEM lock and without TWRP, I was able to install by the recovery in update by the ADB and installed a modified rom to AOSP and the cellphone called, more by account of some bugs I used the fastboot boot twrp.img thread and I ran the TWRP without installing and changed to the lineageOS and installed GApps. I do not intend to use this rom for much longer until I figure out how to unlock OEM by the developer menu I'm going to stick with it I hope it helps someone. Thank you to everyone who helped me.
Tutorials that help:
https://forum.xda-developers.com/moto-z/how-to/official-moto-z-receiving-7-1-1-update-t3620742/page4
https://forum.xda-developers.com/moto-z/development/recovery-twrp-3-0-3-n1-moto-z-t3547672
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
https://forum.xda-developers.com/moto-z-play/how-to/official-android-7-1-1-download-how-to-t3616352
https://forum.xda-developers.com/moto-z/development/rom-aokp-rom-moto-z-oms-substratum-t3550077
phone doesn't turn on with power button
Defaultnickname said:
Check screen while in bootloader. Is there green text "flashing unlock"? Or smth similar.
Try another ROM. My Moto (chinese) flash and boot only on TELUS 25.86-30.
Click to expand...
Click to collapse
phone doesn't turn on with power button so we can't show it but if it plugs to usb 2 port windows detect as "motorolla ADB interface" in cmd command ,we can detect it as fastboot devices, but we can't do anything because moto z with that condition, it doesn't have any Partitions
is there a problem with no solution ? :angel:
rodrigofvl said:
SOLUTION FOR THE PROBLEM
Failure to install rom Moto Z XT1650-05 Sheridan Chinese.
https://forum.xda-developers.com/mo...-xt1650-05-t3695286/post74498676#post74498676
As I did not get able to install another rom or recover the one that was installed because of the blocked bootloader and the OEM lock and without TWRP, I was able to install by the recovery in update by the ADB and installed a modified rom to AOSP and the cellphone called, more by account of some bugs I used the fastboot boot twrp.img thread and I ran the TWRP without installing and changed to the lineageOS and installed GApps. I do not intend to use this rom for much longer until I figure out how to unlock OEM by the developer menu I'm going to stick with it I hope it helps someone. Thank you to everyone who helped me.
Tutorials that help:
https://forum.xda-developers.com/moto-z/how-to/official-moto-z-receiving-7-1-1-update-t3620742/page4
https://forum.xda-developers.com/moto-z/development/recovery-twrp-3-0-3-n1-moto-z-t3547672
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
https://forum.xda-developers.com/moto-z-play/how-to/official-android-7-1-1-download-how-to-t3616352
https://forum.xda-developers.com/moto-z/development/rom-aokp-rom-moto-z-oms-substratum-t3550077
Click to expand...
Click to collapse
my recovery not working.... its damaged. Do you have any solutions?
in the Developer menu has enabled "Unlock OEM".
I run the following commands in adb, and get the following errors:
fastboot flashing unlock =
FAILED (remote: 'Not implemet.')
fastboot: error: Command failed
fastboot oem unlook =
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
fastboot flash recovery recovery.img =
Sending 'recovery' (14100 KB) OKAY [ 0.599s]
Writing 'recovery' F**AILED (remote: 'Flashing Lock Flag is locked. Please unlock it first!')**
fastboot: error: Command failed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help.
Thanks
+1, same thing happening to me, halp
shraga1 said:
in the Developer menu has enabled "Unlock OEM".
I run the following commands in adb, and get the following errors:
fastboot flashing unlock =
FAILED (remote: 'Not implemet.')
fastboot: error: Command failed
fastboot oem unlook =
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
fastboot flash recovery recovery.img =
Sending 'recovery' (14100 KB) OKAY [ 0.599s]
Writing 'recovery' F**AILED (remote: 'Flashing Lock Flag is locked. Please unlock it first!')**
fastboot: error: Command failed
Please help.
Thanks
Click to expand...
Click to collapse
So we could not be able to root this tablet?
Im not even able to let the tablet and the pc communicate together. In adb devices there is no devices, i think is a drivers problem.... i cannot see the mmc of the tablet in my computer....
simone81 said:
Im not even able to let the tablet and the pc communicate together. In adb devices there is no devices, i think is a drivers problem.... i cannot see the mmc of the tablet in my computer....
Click to expand...
Click to collapse
which drivers have you installed?
pabloluih said:
which drivers have you installed?
Click to expand...
Click to collapse
I did connect the tablet to the pc, the problem was in the cable, now i can enter in fastboot but i dont know wich command to use to unlock the bootloader, i tried fastboot oem unlock and it give me as a result failed because unknown command. I hope there will be a way to root it because its very good device. The drivers i used are available online here https://www.getdroidtips.com/root-teclast-p80x-4g/
Go on youtube and find "Teclast Root Process for Android Tablet"
I haven't found a solution but thought this might help.
I thought this might be of some use - however on their website putting in the P80X ID doesn't yield any firmware.
Perhaps you guys can make heads and tails of it.
How do you even get in the developer menu? The usual build number clicking doesn't seem to work on the P80X
ttps://forum.hovatek.com/thread-32287.html
Explained in detail on this site.
few__ said:
ttps://forum.hovatek.com/thread-32287.html
Explained in detail on this site.
Click to expand...
Click to collapse
Thanks for the reply with information. I managed to unlock the bootloader shortly after i posted the message. I'm currently still stuck on flashing a patched magisk boot.img to it.
/edit: Funny, i posted the reply a few hours before i managed to flash a patched and signed boot.img
delete
null
mainframe_cn said:
Thanks for the reply with information. I managed to unlock the bootloader shortly after i posted the message. I'm currently still stuck on flashing a patched magisk boot.img to it.
/edit: Funny, i posted the reply a few hours before i managed to flash a patched and signed boot.img
Click to expand...
Click to collapse
how did you unlock the bootloader?
mainframe_cn said:
Thanks for the reply with information. I managed to unlock the bootloader shortly after i posted the message.
Click to expand...
Click to collapse
That's great and all, but HOW?
Remember, forums are not only for you, but for others too. Share your knowledge!
Hello,
I'm really sorry to bother you on this subject but I can't get my P20lite back to the original firmware.
I tried to downgrade my phone with the firmware "Huawei P20 Lite ANE-LX1 ANE-L21 hw eu Anne-L21 8.0.0.150(C432) Firmware 8.0.0 r1 EMUI8.0" but since then I can't do anything. I can only access the erecovry. I can't do a wipe and multi-tool tells me that :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could you please direct me?
Thanks
BenouLM said:
I tried to downgrade my phone with the firmware "Huawei P20 Lite ANE-LX1 ANE-L21 hw eu Anne-L21 8.0.0.150(C432) Firmware 8.0.0 r1 EMUI8.0" but since then I can't do anything.
View attachment 5376427
Click to expand...
Click to collapse
Downgrade from EMUI 9.1 to EMUI 8 is possible through HiSuite only , or, if your bootloader is unloced, through TWRP and HuRupdater.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
-Alf- said:
fastboot oem get-build-number
Click to expand...
Click to collapse
(bootloader) :ANE-LGRP2-OVS 9.1.0.208
OKAY [ 0.016s]
Finished. Total time: 0.016s
Thx for your help
-Alf- said:
fastboot oem get-product-model
Click to expand...
Click to collapse
(bootloader) ANE-LX1
OKAY [ 0.000s]
Finished. Total time: 0.000s
-Alf- said:
fastboot getvar vendorcountry
Click to expand...
Click to collapse
vendorcountry: orange/all
Finished. Total time: 0.016s
-Alf- said:
fastboot oem oeminforead-CUSTOM_VERSION
Click to expand...
Click to collapse
FAILED (remote: 'Read oeminfo failed!')
fastboot: error: Command failed
-Alf- said:
fastboot oem oeminforead-SYSTEM_VERSION
Click to expand...
Click to collapse
(bootloader) :ANE-LX1 8.0.0.155(C109)
OKAY [ 0.007s]
Finished. Total time: 0.009s
BenouLM said:
I tried to downgrade my phone with the firmware "Huawei P20 Lite ANE-LX1 ANE-L21 hw eu Anne-L21 8.0.0.150(C432)
Click to expand...
Click to collapse
If I not mistaken, your region is orange all C109 , for example this one
https://androidhost.ru/TU9
But this is Oreo firmware, at the moment you need flash Pie firmware for region orange all C109 , IMO. Try google it.
-Alf- said:
But this is Oreo firmware, at the moment you need flash Pie firmware for region orange all C109 , IMO. Try google it.
Click to expand...
Click to collapse
Thx but how should i try? what should i write?
Here?
BenouLM said:
Here?
Click to expand...
Click to collapse
I'm not sure, but you can try it.
Nvm
Btw, have you tried update via eRecovery and WiFi? ("download latest version and recovery")
-Alf- said:
Btw, have you tried update via eRecovery and WiFi? ("download latest version and recovery")
Click to expand...
Click to collapse
yes but it crashes
-Alf- said:
Btw, have you tried update via eRecovery and WiFi? ("download latest version and recovery")
Click to expand...
Click to collapse
Thank you for your help. I succeeded in installing the firmware I put above
Now I have another problem, this phone is from a recycling recovery. They wanted to destroy it because the battery was dead. I changed the battery but I'm facing a google ID.
I have to do a bypass, do you have any idea?
BenouLM said:
I have to do a bypass, do you have any idea?
Click to expand...
Click to collapse
Bypass via safe mode should work, but it depends on build number, region etc.
https://frpbypass.net/frp-unlock-huawei-p20-lite-ane-lx1-downgrade-file-via-safe-mode/
-Alf- said:
Bypass via safe mode should work, but it depends on build number, region etc.
https://frpbypass.net/frp-unlock-huawei-p20-lite-ane-lx1-downgrade-file-via-safe-mode/
Click to expand...
Click to collapse
Yes it's works ! thx
Now all I have to do is sim unlock my Galaxy s5 and get the fingerprint reader from my Galaxy A50 and I'll have done the rest of the phone problems (I recycle phones that go to the scrap yard.)
Thanks a lot to you
If anyone can help me in any way to solve this I would greatly appreciate it.
fastboot oem get-build-number:
ANE-LGRP2-OVS 9.1.0.134
fastboot oem get-product-model:
ANE-LX3
fastboot getvar vendorcountry
vendorcountry: claro/la
fastboot oem oeminforead-CUSTOM_VERSION
FAILED (remote: 'Read oeminfo failed!')
fastboot: error: Command failed
fastboot oem oeminforead-SYSTEM_VERSION:
ANE-LX3 8.0.0.152(C25CUSTC25D1)
fastboot mode recognizes it, even though the screen is off, and it still works since I flashed twrp and normal pass, but it only boots to fastboot with the screen off
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ozhkavosh said:
If anyone can help me in any way to solve this I would greatly appreciate it.
fastboot oem get-build-number:
ANE-LGRP2-OVS 9.1.0.134
fastboot oem get-product-model:
ANE-LX3
fastboot getvar vendorcountry
vendorcountry: claro/la
fastboot oem oeminforead-CUSTOM_VERSION
FAILED (remote: 'Read oeminfo failed!')
fastboot: error: Command failed
fastboot oem oeminforead-SYSTEM_VERSION:
ANE-LX3 8.0.0.152(C25CUSTC25D1)
fastboot mode recognizes it, even though the screen is off, and it still works since I flashed twrp and normal pass, but it only boots to fastboot with the screen off
View attachment 5795813
Click to expand...
Click to collapse
it looks like you installed the wrong (global) firmware. And of course, first of all, it was necessary to install TWRP, right? (I hope min. 3.5.9 version ).
Unfortunately, you have a specific regional variant (single SIM ? ). Try asking here:
https://ministryofsolutions.com/202...re-stock-rom-emui9-1-unlocked-bootloader.html
Another option is a rebrand to C432 region dual SIM:
Guide 1
Guide 2
Also you can try DC-phoenix, test-point method & board software etc.
-Alf- said:
it looks like you installed the wrong (global) firmware. And of course, first of all, it was necessary to install TWRP, right? (I hope min. 3.5.9 version ).
Unfortunately, you have a specific regional variant (single SIM ? ). Try asking here:
https://ministryofsolutions.com/202...re-stock-rom-emui9-1-unlocked-bootloader.html
Another option is a rebrand to C432 region dual SIM:
Guide 1
Guide 2
Also you can try DC-phoenix, test-point method & board software etc.
Click to expand...
Click to collapse
the problem is that it only wants to enter fastboot and the screen is still black, the testpoint also works but I don't have the filthy dongle to be able to use that mode, the device appears like this in device manager
Ozhkavosh said:
View attachment 5795917
Click to expand...
Click to collapse
You violated the partition layout. DC-phoenix is your friend, IMO.
Ozhkavosh said:
I don't have the filthy dongle
Click to expand...
Click to collapse
you don't need a dongle
-Alf- said:
You violated the partition layout. DC-phoenix is your friend, IMO.
you don't need a dongle
Click to expand...
Click to collapse
I revived it with testpoint and board software installing a development build that was the only one in that format and the mobile ended up with a rare model HB something. And then I followed guide 1 that you indicated (thank you) and it's already like LX1, but for some reason it asks me for NCK and I lost the imei 2 (maybe it's because a regional version is installed), I'll try to put a global one and incidentally update to 9.1 as it is now at 8.0
Ozhkavosh said:
I'll try to put a global one
Click to expand...
Click to collapse
C432 is a global. Flash service ROM again and do factory reset in stock Recovery (maybe it's because you was on EMUI 9.1, guide 1 is for E 8.0). Or try "Chapter 2", it works for both EMUI version.
Don't try to upgrade to EMUI 9.1 until you have a full working phone with EMUI 8.0, my advice.