Question Lenovo Legion Duel 2 Fastboot stuck FIX - Lenovo Legion Phone Duel 2

My Duel2 was stucked at FastBoot after using RSA yesterday..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This worked on my Duel 2 - GLOBAL (12.5.188ST)
ROM downloaded from:
romprovider.com/lenovo-legion-2-pro-firmware
(theres also a EEA ROM you can download)
Or you can download your ROM from the RSA app by entering your IMEI
Heres what I did:
*Install Qualcomm USB Driver
(Https://gsmusbdriver.com/install-qualcomm-usb-driver) then restart PC
*Install QPST 2.7.496
(http://qpsttool.com/qpst-tool-v2-7-496)
After installing qpst, locate its folder on your pc, mines on C: Program Files (x86)/ Qualcomm/ QPST/ bin... then open the QFil file in the bin folder.
On QFil:
*select Flat Build
*On the Programmer Path, click Browse, select where your extracted ROM folder is, then select " prog_firehose_ddr.elf " file then click open.
*Click Load XML, and select ALL .xml files
*Select ALL patch
*on your powered OFF Duel 2, press & hold POWER, +VOL, -VOL simultaneously, when the Legion Logo flashes, plug your USB cable on the Left side Type-C port
*On QFil, click Select Port and select your Phone if it doesnt automatically selected when you plug it.
*Click DOWNLOAD
"The QFil app on the QPST folder fixed the error The system cannot find the file specified"
Hope this helps

i was stuck in fastboot for the last 2 days. the backup i had saved using miracle thunder box didnt work and neither did this. But it got a lot further in the boot sequence before resetting lol. So i took the backup i had of my phone, fastboot flashed the persist image over and it booted right up. not sure if it was just coincidence but it reset 3-4 times on me before flashing the image over. Doesnt help those who are already screwed but helps others prepare before attempting an update

ฉันลองทุกขั้นตอนแล้ว แต่ไม่ได้ผล โปรดช่วยฉันด้วย

thank you that was really helpful i didnt know about select all i was selecting 1 after another thank you again for the detailed steps

Related

[Guide-Tool] Clear Download Recovery (Unroot)

Disclaimer:
Code:
You will be doing everything at your own risk.
Only you will be held responsible if you end up damaging or bricking your device.
About this guide
This is a quick and easy guide to get rid of the ROOTED status in download mode on G2 devices.
By doing this, you will return to the factory look of download mode with it showing UNROOTED.
Special Note
I have only tested this on my LG-D802. I do NOT know if this works on other G2 devices.
Therefore, please report back whether it works for you so I can add your device to the OP.
Requirements
LG USB Drivers (Easy to find & install - Google is your friend)
Your G2 must be rooted to use this.
USB Debugging must be enabled in Developers Options.
A software to extract the attached .zip file.
Notepad++
Instructions
Connect your G2 to your PC using MTP. At this point, USB debugging is not necessary. If phone is not recognized, then install/reinstall USB drivers.
Now head into PC - right click on your phone and hit properties. Copy this line as shown in this screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download the attached .zip and extract the content to anywhere you like.
Open rct.cfg using Notepad++. Now delete SERIAL because here you shall paste the serial number of your phone which you copied earlier.
You must now enable USB Debugging in Developers Options. It does not matter if you had it enabled earlier or not.
Cant find Developers Options? Enter Settings - General - About Phone - Software Information - hit buildnumber 7 times and go back to Settings menu.
Open the file named install from the extracted .zip and give it root access on your phone.
Done. Download mode will now show UNROOTED.
OPTIONAL: You can now flash KDZ/TOT file if you want to fully return to stock. The status in download mode will remain unrooted after flashing a stock firmware.
Credits
@Drachenminister - check out his thread
Reserved for FAQ and more.
Deleted
LOL this was very easy and it works like a charm. I am on CloudyG3 and download mode shows unrooted

[GUIDE] Unroot/Upgrade/Unbrick your Note 3 Neo LTE(N7505)

Here's full guide to unroot/upgrade/unbrick your Note 3 neo LTE by flashing stock firmware via Odin
You are doing everything at your own responsibility, but if you follow this guide step by step, you won't brick your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before you proceed, make sure:
1. You have charged your phone to 100%
2. You have Note 3 Neo LTE(SM-N7505), not N750 or something different
3. You have installed Kies and drivers on your PC
4. You have backed up all your data, if you don't need it, just skip this step
5. You have disabled Kies and firewall
6. You have downloaded Odin and firmware
Downloads:
Odin v3.09: http://d-h.st/d4G
Stock Firmware: http://sammobile.com/firmwares - Go to Firmware database/Smartphone/Android/SM-N7505-Galaxy Note 3 Neo LTE/Select your country
How to Flash:
1. Turn off your phone and go to download mode by pressing Power + Volume down + Home. Once you're there, press Vol up. You will see Downloading with Android logo and phone info.
2. Unzip Odin package and stock firmware package on your PC
3. Connect your phone to PC - Use stock USB cable for best compatibility
4. Open odin - Select Run as administrator. You will see the COM port of your phone in ID:COM box, it will turn blue and Added in the message box.
5. Click to PDA and select downloaded firmware. Make sure you have checked Auto Reboot, F.Reset time and nothing else. Now press start.
6. The box will turn Blue with Reset! message. Your phone will reboot.
Note: I reccomend to make hard reset after flashing stock firmware.

Blu life one x

I bricked my Blu life one x and I want to repair it can someone help me out ow to do it and where I can't find the Blu life one x rom?
Download this:
https://www.androidfilehost.com/?fid=24391638059058964
From user @Bad_MOFO_33
Then download the SPFlash tool from here:
http://spflashtool.com/
Then be sure to have usb drivers installed so the COM identifies your phone.
Open the ROM you downladed and extract the carpet into desktop or somewhere you can easily find it.
Open SPFlashtool and go to the DOWNLOAD window and select Scatter-loading and select the scatter file from the folder where the ROM is like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then with the phone turned off (surely is off since its bricked) click the DOWNLOAD button on the spflashtool
And then AFTER you clicked DOWNLOAD on SPFLASHTOOL connect the phone while holding the VOLUME UP and is should identify it and begin the process.
DONT disconect until its done and a BIG GREEN CHECK mark appears, then just unplug and power it on.
ANd thats it
-------------------------------------------
Sorry i dont know why the image is not loading but hopefully the instructions will guide you
Thanks I'm going to try it tomorrow.
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
azazsxsxdcdcfvfv said:
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
Click to expand...
Click to collapse
Might need to repair your IMEI
Follow this guide:
http://sheershbansl.blogspot.mx/2014/08/how-to-fix-invalid-imei-3-methods.html
NOTES:
1.- you IMEI numbers are on the battery sticker theres 2 of em one for sim 1 and the other for sim2
2.-when entering the imei where it say to type AT+ etc etc on our BLU you need to type AT (SPACE) + and the rest, so it looks like AT + and then all the rest (EGMR=1,7,"1234567890")
3.- remember to SET Command and then reset so the IMEI settles in.
Hope thats the problem solver
Thanks for all guys that helped me... The sim problem was my fault cause I messed around with the bands. Like north America and world bands...

Amazfit nexo (Magisk,root)

I am not the author, the author is a Chinese user, just a simple translation, the original post will be placed in the back.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Amazfit nexo (Magisk,root,wearable)
Why not use fastboot because the command is disabled.
You need: adb tool, QFIL (in QPST), MagiskManager.
1 .Install QPST on your computer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Open QFIL and adb, enter adb reboot edl in the command window to enter 9008 mode
3.Extract boot
3.1)Download firehose and configure it according to the figure below
3.2)After entering Partition Manager, right-click the partition and click Manage Partition
3.3)Read partition: read as below
==============================================================================================
Note: Please backup each partition according to the above method, otherwise you will not be able to boot after failure. You can't use other people's recovery package to recover.
And at the same time rename to the partition name (without changing the suffix)
==============================================================================================
4.Convert boot.bin to boot.img (use IMg2simg)
5.Import to watch
Put boot.img into the watch, and cancel the hook of keeping avb2.0 in the installation option of MagiskManager.
6.Flash into boot
There is a magisk_patched.img file in the Download folder of your watch, put it on the computer, the watch restarts into 9008 mode, also use Partition Manger, right-click the boot partition (not aboot partition, don't
make a mistake), also click on the first One item, but to flash it in, we click Load Image and select this magisk_patched.img for flashing, twrp is the same.
7.Flash into wearable
Install ROOT Explorer,Unzip the wearable.zip and put it in the watch, copy it into the corresponding path one by one (for example, system/framework corresponds to /system/framework)
8.Then you can try to install some modules or wearos applications
File:
https://drive.google.com/drive/folders/1BHlxNqKZ3QoRv3PSULn1AwGadowSA_nQ?usp=sharing
Link:
https://www.coolapk.com/feed/176069...d=1096145&shareFrom=com.coolapk.market_10.2.1
https://www.coolapk.com/feed/175621...d=1096145&shareFrom=com.coolapk.market_10.2.1
https://www.coolapk.com/feed/173257...d=1096145&shareFrom=com.coolapk.market_10.2.1
https://www.lanzous.com/b015anw7e 密码:5ty2
can you point us to the direction of this chinese guy?
xicko said:
can you point us to the direction of this chinese guy?
Click to expand...
Click to collapse
This is the CoolMarket homepage of Chinese authors. Http://www.coolapk.com/u/1415080
The author also asked a programmer to compile it TWRP,https://wwu.lanzouv.com/i1L9Y0a61q3c
Password: 69zz

Question {GN2200} {C.11} Unbrick script. C.12 & C.13 soon. My rewritten AIO SCRIPT COMING SOON

Requirements !!!SCRIPT WILL WIPE DATA!!!
Backup your data 'script will wipe data'
GN2200 Nord N20 Phone
Should be on by stock (Active Slot A)
Unlocked Bootloader
Windows PC
Latest ADB & Fastboot drivers
Instructions
Download & Extract restore Script zip
Open Extracted zip folder
Open #N20 100% Stock unbrick (GN2200 ONLY).bat file
Connect phone to PC via fastboot
Hit "Y" on keyboard once your ready to start
Once script turns GREEN an says COMPLETED reboot to system
ENJOY
TESTED ON 2 GN2200 N20's both successful
"""NOT FOR CPH2459 """
Download Link
N20 Stock ROM Unbrick tool zip (GN2200 C.11 A12 ONLY)
Download size ( 7.5gb )
Extracted size ( 10.5 )
GN2200 UNBRICK SCRIPT
GN2200 UNBRICK SCRIPT replacement bat. Place this in extracted unbrick script folder an overwrite the original bat
i have a rewritten all-in-one script for gn2200. With a lot my features. Doing final touches.
some guy on "gn2200 telegram" is trying to steal my work. An banned me
XDA= (spatz1987) which is banned already
Telegram= ( @bABySky2 )
an doing a poll to steal my work
I'm am sorry mods but needs to be known
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[email protected] telegram
STOLE MY ALL IN ONE SCRIPT
CODE.!!!!!!
!!!!!DO NOT USE WILL BRICK DEVICE!!!!
Awesome!! Thanks man!!!... Any way to make this to work with edl? Lol Screen won't turn on at all, I'm hoping I can connect to edl..
abovethegov said:
Awesome!! Thanks man!!!... Any way to make this to work with edl? Lol Screen won't turn on at all, I'm hoping I can connect to edl..
Click to expand...
Click to collapse
I have a rewritten one also but no edl

Categories

Resources