Hi ,
About:
This is an unofficial 6.0x build of Blisspop compiled using caf source from sultanXDA.
Changes from official build:
--
Code:
All sultanXDA's patch[/color][/b]
--
Code:
SnapdragonCamera[/color][/b]
--
Code:
android_hardware_qcom_media
-
Code:
android_hardware_qcom_display
-
Code:
android_hardware_qcom_audio
-
Code:
android_kernel_oneplus_msm8974
-
Code:
proprietary_vendor_oneplus
-
Code:
proprietary_vendor_oppo
-
Code:
android_frameworks_base
-
Code:
android_frameworks_av
Source used:
1.https://github.com/BlissRoms
2.https://github.com/sultanxda/android_kernel_oneplus_msm8974
Credits:
-sultanXDA
-Blisspop team
-XDA
-Google
Let me know if i have missed any of you .
Latest Download(08/02): (Refer the second post for the older builds)
Blisspop_CAF_MM_08/02
Screenshots:
Uploading..
XDA:DevDB Information
Blisspop, ROM for the OnePlus One
Contributors
Vivek_Neel
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2016-01-20
Last Updated 2016-02-07
Changelog:
V8:
Here
V7:
Here
V6:
Here
V5:
Here
V4:
Here
V3:
Here
V2:
Here
V1 :
Initial release
Older Builds:
Blisspop_CAF_MM_19/01
Reserved
Just in case..
Happy To see bliss marshmallow first caf build
Downloading
Will tell u bugs after testing ?
is it necessary to use latest firmware ?
i mean this :
CM 30/12 from jgcaap
Will give it a test run later today. Looking for something to update to and test.
@Vivek_Neel
Mate...Bliss for MM called Bliss 6.0 and i think you need to drop the *Pop* in your first post + the thread title too just to avoid some confusion...peace
...thread sub/
storm119 said:
@Vivek_Neel
Mate...Bliss for MM called Bliss 6.0 and i think you need to drop the *Pop* in your first post + the thread title too just to avoid some confusion...peace
...thread sub/
Click to expand...
Click to collapse
Yeah sure mate. Will do once i am on my laptop
Is it 6.0 or 6.0.1 ?
shield1331 said:
Is it 6.0 or 6.0.1 ?
Click to expand...
Click to collapse
6.0.1
Just flashed the ROM booted up fine thanks for ROM vivek
Check your inbox when you have a sec bud
Does Bliss6 support encryption?
EDIT: Flashed on top of an already-encrypted device and it decrypts and works just fine.
Blisspop, my favourite lollipop Rom. Now I'm on Temasek 6.0 (CAF) but I will try this one in a few days. Excellent work Vivek_Neel.
Vivek_Neel said:
Older Builds:
Click to expand...
Click to collapse
lol, you should update the OP )
1. refer to post #3 for older builds
2. is the 20160120 latest or "Latest Download(19/01)"
3. nice job, been waiting for this one
Thanks a lot :angel:
Thanks for porting BP to MM!
So I had the last CAF build flashed and decided to upgrade with this rom and had the oppo.verify_trustzone error. Followed instructions posted on Cm13 thread here and it is booting fine
Here are the instructions I used:
If you get an error when trying to install ("oppo.verify_trustzone" error), then first you must install/use TWRP recovery 2.8.6.0 (TWRP 2.8.7.0 cannot properly update the modem). Next, download and flash the latest official CM13.0 nightly. Then, without rebooting from recovery, wipe /system and flash my ROM. This process is necessary to update various firmwares (including TrustZone), as the updated firmware is needed by my ROM. After flashing my ROM, flash a Google apps package, and then reboot.[/COLOR]
Installation instructions (for updating to a newer release):
If you are already running my CM13.0 ROM, then you can update to a newer version of the ROM via the built-in OTA updater or by simply dirty-flashing the new ROM build without wiping anything. HOWEVER, do NOT reinstall Google Apps after installing a new update.
Click to expand...
Click to collapse
flashed open gapps and it booted fine, let it sit for 5 minutes after boot, rebooted in to recovery, and flashed Xposed-v79-sdk23-arm.zip.
Restarted phone and it stuck in bootloop
went back into recovery, sideloaded xposed uninstaller, wiped cache and it boots again.
miss the custom pattern unlock too
OP feel free to continue these builds if you like. OPO builds from source with no issues now but I have no problems with you building unofficial. However if you would like to contribute to the OPO source just let me know via PM and we can get you sorted out.
Just messing with optimization routines and toolchains now. Thank you for all your help man! The team thanks you as well!
ahb83 said:
Thanks for porting BP to MM!
So I had the last CAF build flashed and decided to upgrade with this rom and had the oppo.verify_trustzone error. Followed instructions posted on Cm13 thread here and it is booting fine
Here are the instructions I used:
flashed open gapps and it booted fine, let it sit for 5 minutes after boot, rebooted in to recovery, and flashed Xposed-v79-sdk23-arm.zip.
Restarted phone and it stuck in bootloop
went back into recovery, sideloaded xposed uninstaller, wiped cache and it boots again.
miss the custom pattern unlock too
Click to expand...
Click to collapse
I think you will need newer version of twrp for this MM Rom:
http://build.twrp.me/twrp/twrp-2.8.7.1-bacon.img
RBwai said:
I think you will need newer version of twrp for this MM Rom:
http://build.twrp.me/twrp/twrp-2.8.7.1-bacon.img
Click to expand...
Click to collapse
didn't realize a new one was out, but that did the trick. updating to new one now.
Thanks
How well do regular gsi's work on the v30?
I tried arrowOs and havoc rom on the us998 sprint so far but you always have to flash lineage 15.1 trable first to get one working.. I only get mismatch vendor so I think the new twrp you can just try flashing without lineage in see what u get
There is Android 11 ROM for Xperia Tablet Z4.
It's quite stable.
Kernel sources
Bugs:
- The same as LOS 18.1.
How to install:
1) use TWRP 3.4.0 (this is better).
2) do factory reset (wipe)
3) Flash the firmware, nik,bit or flamegapps, magisk 21 and that’s it.
Change log:
20210104- initial build.
Last builds (mirror) are here.
Sabar_op link
We must be infinite grateful to sabar_op for his hard work in development of this rom and Bernie and Tarkzim who help to update kernel for kitakami devices. :good:.
There is Android 10 ROM for Xperia Tablet Z4.
It's quite stable.
Kernel sources.
Bugs:
- The same as LOS 17.1.
How to install:
1) use TWRP 3.4.0 (this is better).
2) do factory reset (wipe)
3) Flash gapps, magisk and that’s it.
Change log:
20210108- initial build.
Last builds (mirror) are here.
Sabar_op link
We must be infinite grateful to sabar_op for his hard work in development of this rom and Bernie and Tarkzim who help to update kernel for kitakami devices. :good:.
Instructions:
0. Make sure your bootloader is unlocked
1. Download ROM zip from the link below, and grab Magisk patched boot.img inside the folder as well if you want root access
2. Reboot to bootloader
2.5. Flash updated bootloader.img and radio.img from Google site
3. Use `fastboot -w update LineageOS_microG-bramble-(BUILD DATE HERE)-userdebug-signed.zip` to flash
and yes, you can omit the "-w" parameter if you're not flashing for the first time, aka just updating from previous release
4(optional). Hopefully after flashing you'll be booted into LineageOS, reboot to bootloader again,
and flash the Magisk patched boot.img extracted from the 7z file with `fastboot flash boot magisk_patched.img`,
reboot after finished
5. Enjoy!
Click to expand...
Click to collapse
Download from GitHub Release page
Download(MEGA, won't be updated anymore)
Features:
1. MicroG integrated nicely (Thank OmniROM dev([email protected]) for the repo)
2. Replaced default WebView with Bromite WebView
3. Default DNS was set to UncensoredDNS in framework overlay
4. Removed unnecessary prebuilt APKs
Click to expand...
Click to collapse
Contacts:
Telegram:
Channel for Pixel 4a 5G related stuff
Group for Pixel 4a 5G discussion
Contributors
dic1911
ROM OS Version: Android 12
ROM Kernel: Linux 4.x
ROM Firmware Required: Current
Based On: LineageOS
Version Information
Status: Testing
Created 2021-12-19
Known Issue
1. SMS messages not receiving (Fixed in 2021/12/27)
2. No network access for apps installed in work profile (Looks like ROM side bug, still investigating)
How do I install for the first time? Please help me
trongcccc said:
How do I install for the first time? Please help me
Click to expand...
Click to collapse
Where are you up to? Have you unlocked the boot loader, as per - https://wiki.lineageos.org/devices/bramble/install
I'm running into my pixel 4a5G in a boot loop. I downloaded the wrong lineage product, forgetting that I have A-12. duh.
Just a quick head up, SMS message functionality isn't working in initial build, it's fixed in latest build (2021/12/27)
Hello! Mind elaborating on this step? Thanks!
2.5. Flash updated bootloader.img and radio.img from Google site
(What Google site? Do you have a URL? Specific version?)
kevin71246 said:
Hello! Mind elaborating on this step? Thanks!
2.5. Flash updated bootloader.img and radio.img from Google site
(What Google site? Do you have a URL? Specific version?)
Click to expand...
Click to collapse
Official factory firmware, any version as long as it's Android 12 and for your phone.
Quick question, is this just using the lineage 18.1 device trees or?
EDIT: Nvm i saw the 19 branch
Hey quick question, how do you package the finished build as a bunch of images?
A little heads up, initial build for Lineage 19.1 is now up, without Bromite System WebView for now.
Another build is up, now with Bromite Webview and April security patch!
How do I get support for this 19.1 version? I tried the official Lineage channels but they told me they do not support. I downloaded and installed from here:
LineageOS for microG
lineage.microg.org
nanu.nanu said:
How do I get support for this 19.1 version? I tried the official Lineage channels but they told me they do not support. I downloaded and installed from here:
LineageOS for microG
lineage.microg.org
Click to expand...
Click to collapse
I doubt anyone really provide extra support for that as they're mostly just grab existing LOS stuff and build without further effort afaik.