Related
Hey all,
I have a CWM backup of my current rom and have backups of apps and data but am stuck at a bootloop.
As I have read countless articles, it seems my error is because I have a locked bootloader(not actually sure). Though, I only tried to flash
clockcycle's wiped v20d cwm backup file. It failed part way saying it couldn't write to /system.
Since then, I haven't been able to fully enter CWM. just see the red triangle with the droid guy on his back.
I have read Cmahendra's unbricking guide but it doesn't work as I have installed JB and even the tips to unplug, wait 10s and reopen the program to flash again it still won't work. Still stops at 15% saying error connecting to the phone.
There is a similar thread which had this exact problem which said to
use the online method to recover your phone since I had already installed JB. I edited the hosts file to remove the fake offline server and opened up the b2CAppsetup.exe, clicked on customer support,
entered my model LGP769BK and my S/N and it began to start the process and 'analyze' then crashed and said "updating is not possible any longer due to a fatal error while the LG mobile phone software Update"
I've tried to search this out myself and not waste any space but I'm at loss here. If anyone has any help, it would be much appreciated
as I don't have a phone while this is not working.
I've tried all the ways to to hard reset, master reset and still I get the droid guy on his back. I can get to S/w mode like all the other posts say to do but none of those fixes seem to work for me. Am I missing something?
Do I have any options here? I have kind of read that I should just unlock the bootloader but I don't think that applies in my case as I can't turn on my phone fully.
edit: for the online method(LG support tool), it basically cancels when it goes to the 'downloading' phase --> this is what I've seen as most of the answers but doesn't work
Upon further reading,
many seemed to need to replace their u-boot and x-loader
I did so and installed fastboot using Lelus' script here:
http://forum.xda-developers.com/showpost.php?p=41768774&postcount=1
I used option 6 which allowed me to flash the u-boot and x-loader from p760(works with my 769 and others as it says in the options) for JB
I'm not sure if I needed this as I don't have an unlocked bootloader.
I'm not sure of commands in fastboot but I ran
fastboot devices and it showed something
I also ran: fastboot flash recovery recovery.img
and I put one of my cwm backups in the "yours" folder
After I activate fastboot, it brings me to the C:\fastboot\yours folder
I assume this is for me to put my intended files in but I'm unsure if I should use my cwm backup or something else?
After it flashed the recovery img, I sent a fastboot reboot command
but it still went back to the droid lying down with a red triangle.
As some of you may see, I'm not too great with this but I feel like I'm close. Does anybody have an idea of what I should be doing?
should I flash an update.zip?
I don't know many commands but hopefully this gets me going in the right direction.
PLEASE HELP ME!!!!
I guess your cmw restore formatted your system but couldnt load the new system
the recovery you run with a locked bootloader uses a technique called 2nd init which i think is somewhere stored in the system partition. so when the recovery formatted the system, it lost itself too.
I've had a similar problem. the way out would be booting into the SW upgrade mode--switch off the device, remove the battery, remove the usb cable. press the volume up button and connect the phone to the computer. wait for a couple of seconds and then insert the battery.
you should be in the SW upgrade mode
now use the B2C client. if it gives an option to upgrade, use that otherwise, go to the customer support menu and press recovery phone
I have already done earlier. It may have gotten lost in my frenzy of information. I have put the phone into software mode, as you said, and it won't work either; There's no option to click upgrade because it's JB(V20D) and when I click recovery phone and enter my imei, LG mobile support tool(B2capp.exe) analyzes and then has a 'fatal error'
Since I flashed the new u-boot and x-loader my screens are all backwards/mirrored. Maybe the tool flashed an unlocked u-boot and x-loader if that's possible.
Is a recovery possible by fastboot?
I have a clean and full copy of my cwm recovery as well as apps and data backed up, I just need to get this phone in working order
shockah486 said:
I have already done earlier. It may have gotten lost in my frenzy of information. I have put the phone into software mode, as you said, and it won't work either; There's no option to click upgrade because it's JB(V20D) and when I click recovery phone and enter my imei, LG mobile support tool(B2capp.exe) analyzes and then has a 'fatal error'
Since I flashed the new u-boot and x-loader my screens are all backwards/mirrored. Maybe the tool flashed an unlocked u-boot and x-loader if that's possible.
Is a recovery possible by fastboot?
I have a clean and full copy of my cwm recovery as well as apps and data backed up, I just need to get this phone in working order
Click to expand...
Click to collapse
If you fastboot flash the u-boot and x-loader from p769(ICS) it should go thru with the offline flash detailed in cmahendras guide.
http://forum.xda-developers.com/showthread.php?t=2085344
Use the KDZ_FW_UPD.zip from this thread
Or try this
Remove all of the stuff you have downloaded for this. Download the original B2C client from LG's site and use that
Tablechair said:
If you fastboot flash the u-boot and x-loader from p769(ICS) it should go thru with the offline flash detailed in cmahendras guide.
Click to expand...
Click to collapse
Thanks.I'll try this. if I have the ICS bootloader, does that mean I'll have to flash the V10G kdz? or can i do the v20d kdz
dhruvbatra205 said:
http://forum.xda-developers.com/showthread.php?t=2085344
Use the KDZ_FW_UPD.zip from this thread
Or try this
Remove all of the stuff you have downloaded for this. Download the original B2C client from LG's site and use that
Click to expand...
Click to collapse
I have the updated kdz fw upd .zip from the unbrick and root thread as well as downloaded a new, official B2C client but they all still hang at the download part during phone recovery.
Tablechair, that did the trick.
Is this because the tool we use to flash for the offline method doesn't recognize the x and u-boot loaderse of JB?
After I installed the ICS boot loaders, my software upgrade mode wasn't mirrored anymore.
I did as tablechair and flashed the V20D.
Does anyone understand why this problem happened in the firstplace? Maybe I didn't get a full copy of clockcycle's backup cwm
or should I have not flashed his recovery in the first place since I didn't have an unlocked bootloader?
Again thank you for all your help and if anyone can provide answers to my other supplemental questions, that'd be great.
Off to root and probably unlock bootloader to be sure.
edit: I can't find the thanks button. but thank you very much tablechair. much appreciated. Hope this can help someone else
p.s. also big thanks to those who made the fastboot program for p769(Artas182x and sguerrini97). really an invaluable tool as I now know.
shockah486 said:
Tablechair, that did the trick.
Is this because the tool we use to flash for the offline method doesn't recognize the x and u-boot loaderse of JB?
After I installed the ICS boot loaders, my software upgrade mode wasn't mirrored anymore.
I did as tablechair and flashed the V20D.
Does anyone understand why this problem happened in the firstplace? Maybe I didn't get a full copy of clockcycle's backup cwm
or should I have not flashed his recovery in the first place since I didn't have an unlocked bootloader?
Again thank you for all your help and if anyone can provide answers to my other supplemental questions, that'd be great.
Off to root and probably unlock bootloader to be sure.
edit: I can't find the thanks button. but thank you very much tablechair. much appreciated. Hope this can help someone else
p.s. also big thanks to those who made the fastboot program for p769(Artas182x and sguerrini97). really an invaluable tool as I now know.
Click to expand...
Click to collapse
Things don't always go according to plan, maybe his Clockworkmod backup was made from the touch version and he didn't have artas182x second init recovery installed. So when the cwm failed the first time, did you try to restore your cwm backup?
kuma82 said:
Things don't always go according to plan, maybe his Clockworkmod backup was made from the touch version and he didn't have artas182x second init recovery installed. So when the cwm failed the first time, did you try to restore your cwm backup?
Click to expand...
Click to collapse
Not yet. having problems flashing a kdz again. I've tried the 2 different software modes, as well as setting emerg and diag but still getting stuck at 15% again.
Do i have to replace my uboot and xloader with the ICS ones every time I want to use the offline flash method?
edit: yup, after replacing with ICS loaders again i'm able to flash using software upgrade. will update on whether I can restore cwm
kuma82 said:
Things don't always go according to plan, maybe his Clockworkmod backup was made from the touch version and he didn't have artas182x second init recovery installed. So when the cwm failed the first time, did you try to restore your cwm backup?
Click to expand...
Click to collapse
I realized I misread your question. When I flashed before the incident, it failed to write to system and I didn't restore my other folder. I rebooted and it was all missed up. Anyway, now that I've got everything back and now with an unlocked bootloader, i was able to recover my old image. However, data isn't working so I have to find the radio to flash as I recall reading in other threads.
Can someone explain in laymen terms why this is? recap, i was on unlocked bl rooted jb and I flashed my old cwm backup when I was rooted but had a locked bl. My apps and messages were all there but the radio was different. I'd understand if I was going from ICS to JB but I was on JB both times. The only difference being a locked BL. It's got to be something about the Radio from p760 or V20B that didn't work on my earlier backup or something like that because the layout status bar is different with a "data" button and showing H instead of 4g(which are the same afaik).
Since, I restored to my backup from after my bootloader unlock and root so data is working showing 'H' with the different layout
Also, I had problems backing up and restoring until I noticed that it works better when I power off the phone and do the manual commands to enter recovery as opposed to using the app to send me to recovery(where I incurred /system backup errors).
My last question is which cwm recovery should I use? I currently have the one for a locked bootloader installed as per Artas182x's website. On that post he has a link for an unlocked bootloader recovery on the xda forums but that thread was updated to not working. Are there any disadvantages to me using a locked bootloader cwm recovery?
I don't think I have any option but to try it as I want to flash CM10.1 for p769. I also read that if your bootloader is unlocked, you can download the cwm from the googleplay. If this is true, can I just install over or should I uninstall the Artas182x locked bootloader one????
update: have to remove l9 recovery by deleting the appropriate system folders and then flash the appropriate .img through adb commands
Help.
shockah486 said:
I realized I misread your question. When I flashed before the incident, it failed to write to system and I didn't restore my other folder. I rebooted and it was all missed up. Anyway, now that I've got everything back and now with an unlocked bootloader, i was able to recover my old image. However, data isn't working so I have to find the radio to flash as I recall reading in other threads.
Can someone explain in laymen terms why this is? recap, i was on unlocked bl rooted jb and I flashed my old cwm backup when I was rooted but had a locked bl. My apps and messages were all there but the radio was different. I'd understand if I was going from ICS to JB but I was on JB both times. The only difference being a locked BL. It's got to be something about the Radio from p760 or V20B that didn't work on my earlier backup or something like that because the layout status bar is different with a "data" button and showing H instead of 4g(which are the same afaik).
Since, I restored to my backup from after my bootloader unlock and root so data is working showing 'H' with the different layout
Also, I had problems backing up and restoring until I noticed that it works better when I power off the phone and do the manual commands to enter recovery as opposed to using the app to send me to recovery(where I incurred /system backup errors).
My last question is which cwm recovery should I use? I currently have the one for a locked bootloader installed as per Artas182x's website. On that post he has a link for an unlocked bootloader recovery on the xda forums but that thread was updated to not working. Are there any disadvantages to me using a locked bootloader cwm recovery?
I don't think I have any option but to try it as I want to flash CM10.1 for p769. I also read that if your bootloader is unlocked, you can download the cwm from the googleplay. If this is true, can I just install over or should I uninstall the Artas182x locked bootloader one????
update: have to remove l9 recovery by deleting the appropriate system folders and then flash the appropriate .img through adb commands
Click to expand...
Click to collapse
Although I might be late, I have the same problem and the same phone and I really need help. I have a soft bricked phone lg optimus l9 and I had the same problems that you had exactly... Which is weird exept I don't have Clock Work Mod or anything ... If you get this I would really appreciate some help. Thanks
yup me too
I finally got software upgrade to work with my lg p769 that was security error cuz i still haven't unlocked the bootloader, if i knew what a good job lg and T-Mobile did in locking it i would have waited and got a g3 that my buddy rooted in like 5 min and unlocked the boot....
What worked for me is this LG FLASH TOOL 2014 THREAD ON XDA
http://forum.xda-developers.com/showthread.php?t=2797190
flashed both the 20H and 20D successfully i uninstalled everything lg in the control panel first though.
Hope this works for you cuz i was struggling on and off for a month to get this far lol
the 2014 tool ultimately worked for me too, once I fixed a couple things. I had rooted and forgotten to unlock, so it was at Security Error, and it would also disconnect at 15% .. in the 2014 tool, I had to install all the updates even though I'm in windows 7 or it would keep doing it. All good now.
I have been trying all these methods and I am still not able to get in the S/W upgrade mode. The only thing I am getting from the device is being able to put it fastboot mode (The inverted one). I really want to revive this phone
Thanks in advance for any help given
Liger878 said:
I have been trying all these methods and I am still not able to get in the S/W upgrade mode. The only thing I am getting from the device is being able to put it fastboot mode (The inverted one). I really want to revive this phone
Thanks in advance for any help given
Click to expand...
Click to collapse
Hey, it's been ages since I have done any of this but IIRC, if you can get into fastbood mode u can still get into software mode,
- turn phone into fastboot mode
- open the software upgrader thing as you normally do
- maybe switch emerg to diag or something like that
- this part is where it's slightly different than the normal way(same program but u select a different option than the default 1st option on
I think if yoiu look through the tutorials it does mention an alternative method for getting into software mode
in one instance in my past, i had to reflash the ICS boot drivers so the software installer would recognize that
the flashing of the ICS boot drivers is done through fastboot. Should be a post in my history where I asked a question regarding this.
Sorry for the chaos but maybe this will help you get in the right direction since I don't know any of your phone history and what you've done etc
best of luck mate
shockah486 said:
Hey, it's been ages since I have done any of this but IIRC, if you can get into fastbood mode u can still get into software mode,
- turn phone into fastboot mode
- open the software upgrader thing as you normally do
- maybe switch emerg to diag or something like that
- this part is where it's slightly different than the normal way(same program but u select a different option than the default 1st option on
I think if yoiu look through the tutorials it does mention an alternative method for getting into software mode
in one instance in my past, i had to reflash the ICS boot drivers so the software installer would recognize that
the flashing of the ICS boot drivers is done through fastboot. Should be a post in my history where I asked a question regarding this.
Sorry for the chaos but maybe this will help you get in the right direction since I don't know any of your phone history and what you've done etc
best of luck mate
Click to expand...
Click to collapse
Thanks, Never tried switching to DIAG before but I will try it and let you know what is the outcome.
Hopefully you find the thread that states the exact steps bc that is off the top of my head and over a year ago by memory . GL bud
Liger878 said:
Thanks, Never tried switching to DIAG before but I will try it and let you know what is the outcome.
Click to expand...
Click to collapse
Hey, I have been trying it with the fastboot but it keeps timing out and not allowing me to finish. One thing I should let you know is that, ever since I had put the device in fastboot, I am not able to get back the S/W upgrade mode. Dont know if that will help in seeing what my problem is or if you want me to explain everything from the beginning again, I am more than happy to.
Have you followed the steps that I linked to in the first 3 posts of this thread?
Follow the steps to flash the ICS bootloaders in fastboot and then you can do the fastboot trick for getting the software to recognize your device.
Right now your phone has the JB boot loader on it and is thus not recognized by the software.
recap:
step 1: flash the ICS bootloaders in fastboot (look at the linked thread in post 2)
step 2: use the software in emerg or diag mode but sitll follow the same steps as the tutorial. I think my earlier posts should explain precisely.
if you dont flash the ICS bootloaders, it won't be recognized by the KDZ installer
so I managed to root my device without bricking it
and now I needed the twrp recovery thing so I could install cm 10.2
now I followed some tut on youtube that told me to use flashify which I did and I then downloaded some old version of twrp with it
when I rebooted my device it said safe reboot error or something.. and now it does nothing (freaking out here)
it won't turn on even when I try to reboot into recovery when I put it in my pc it shows like 10 storage devices that I need to format
pleasse help me (I had this phone for less than a week now))))))
ipsmaxes said:
so I managed to root my device without bricking it
and now I needed the twrp recovery thing so I could install cm 10.2
now I followed some tut on youtube that told me to use flashify which I did and I then downloaded some old version of twrp with it
when I rebooted my device it said safe reboot error or something.. and now it does nothing (freaking out here)
it won't turn on even when I try to reboot into recovery when I put it in my pc it shows like 10 storage devices that I need to format
pleasse help me (I had this phone for less than a week now))))))
Click to expand...
Click to collapse
First step: Don't panic!
Second step: Tell us which version of the G2 you have (carrier) and which update you had on before things went south, and also which version of TWRP you have.
Third step: Please explain what you mean by it not turning on but plugging it into the PC shows odd things.
Does that mean you CAN still get into recovery? Can you get to download mode? But either way, just stay calm. I just helped my buddy with the ATT version fix his phone from a similar issue a couple of days ago and I have also played with the Sprint version quite a bit and am familiar with LGs in general. Lemme know these things and I can help get you back on the right track.
Can you get into recovery mode?
If you can, try the factory reset and reboot your device.
Does your phone connect to adb?
If so i guess you could flash a fresh rom from there.
Correct me if i'm wrong, i am a new user with slight experience.
Same Thing Happened to Me
I'm freaking out a bit as well. I tried the Flashify method of installing TWRP and got the error message followed by a blank unresponsive phone. Got there via a "Phone Tech Kid" video explaining how to install TWRP. Plugging it into my computer results in being able to open a "drive" with one folder titled "image". The image file that I flashed is 2.6.3.2-g2vzw obtained via a link from this video:
Has anyone come up with a solution?
alferdjeffers said:
I'm freaking out a bit as well. I tried the Flashify method of installing TWRP and got the error message followed by a blank unresponsive phone. Got there via a "Phone Tech Kid" video explaining how to install TWRP. Plugging it into my computer results in being able to open a "drive" with one folder titled "image". The image file that I flashed is 2.6.3.2-g2vzw obtained via a link from this video:
Has anyone come up with a solution?
Click to expand...
Click to collapse
Probably would be best to start your own thread. However, what update were you on? I'm hoping that you do have the Verizon version of the G2? What error is on the screen? But generally speaking, you should be able to boot to the software update mode and re-install the stock OS with the kdz file, for most G2 things. I haven't worked on a VZW one though, only Sprint and T-Mobile ones and they're all a bit different.
Q&A for [RECOVERY] TWRP Recovery 2.8.1.0 - Apollo
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWRP Recovery 2.8.1.0 - Apollo. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
droiduzr2 said:
My device is "bricked". I screwed up safestrap install and my device just boots to the grey kindle screen.
Click to expand...
Click to collapse
Just to clarify: does your device
get stuck forever at
spontaneously restart after
get stuck forever at a blank screen after
the "grey kindle screen"?
I managed to recover from the third alternative, but then I had adb access while the screen was blank...
draxie said:
Just to clarify: does your device
get stuck forever at
spontaneously restart after
get stuck forever at a blank screen after
the "grey kindle screen"?
I managed to recover from the third alternative, but then I had adb access while the screen was blank...
Click to expand...
Click to collapse
my device boots up and stays at grey kindle screen
nothing happens after
That doesn't tell us anything.
How can I check if recovery is installed successfully? I could rollback to 309 and update with stock 310. Then I had to root and followed the instructions in the first post. Adb showed something with in and out, I rebooted and nothing seemed to have changed.
Wher I start with vol + It shows only reboot and factory reset.
Bruder Torgen said:
How can I check if recovery is installed successfully? I could rollback to 309 and update with stock 310. Then I had to root and followed the instructions in the first post. Adb showed something with in and out, I rebooted and nothing seemed to have changed.
Wher I start with vol + It shows only reboot and factory reset.
Click to expand...
Click to collapse
If you're not booting into TWRP, then it probably didn't install.
Try using Flashify.
Great, I had to sideload Flashify apk and install it via adb install, then it worked , I could see the difference
Till now all seems great although the way to reach it is not described perfectly (as I normally have only to do with windows systems, too many steps I had to find out by myself and I never knew if the tablet will be still alive after the next step )
Pretty Good Work , thanks a lot for all your effort !!!!
Factory Reset?
droiduzr2 said:
my device boots up and stays at grey kindle screen
nothing happens after
Click to expand...
Click to collapse
I see... I suppose you have checked, and adb doesn' t work..
(Otherwise, although a long shot, it may be worth double-checking.)
BUT, you say you can get into recovery (Power+VolumeUp, I assume):
droiduzr2 said:
I can get into that weird looking recovery that does not allow fastboot.
Click to expand...
Click to collapse
The Amazon stock recovery should have a 'Factory Reset' option.
Have you tried that one? (WARNING: all your data will likely be gone; not sure if it helps with the OS, though...)
BTW, do you remember _how_ exactly messing up SafeStrap happened?
If you provide details, someone with a more intimate understanding of how SafeStrap works
may have an idea how you might go about getting your device back to life again.
draxie said:
I see... I suppose you have checked, and adb doesn' t work..
(Otherwise, although a long shot, it may be worth double-checking.)
BUT, you say you can get into recovery (Power+VolumeUp, I assume):
The Amazon stock recovery should have a 'Factory Reset' option.
Have you tried that one? (WARNING: all your data will likely be gone; not sure if it helps with the OS, though...)
BTW, do you remember _how_ exactly messing up SafeStrap happened?
If you provide details, someone with a more intimate understanding of how SafeStrap works
may have an idea how you might go about getting your device back to life again.
Click to expand...
Click to collapse
Thank you for the detailed response.
Yes, I did install safestrap. I admit I did not fully understand what I was doing. I thought I would just wipe everything to have a clean system as we usually do for most devices. I wiped the system also which deleted the system rom.
Upon reboot it just sits at the grey kindle screen never booting past. I played around with the buttons and stumbled upon the power and vol+.
I got into Kindle system recovery and did the wipes but nothing boots up because I deleted the system os.
Would ADB work from the Kindle recovery screen?
Remember I have no OS on the device now.
Please let me know what to do now?
Where are the Kindle drivers for Win7 which has ADB driver for it. The problem is windows will not recognize the device I don't think.
14.3.2.4 can have twrp?
I want to install the nuxus rom into my HDX 8.9 with twrp.
I just wonder if I can install the twrp to my 14.3.2.4 version HDX.
Can I ?
by the way, I cannot find a step-by-step twrp install procedure.
If someone posts a youtube video, it will be awesome.
vandy_andy said:
I want to install the nuxus rom into my HDX 8.9 with twrp.
I just wonder if I can install the twrp to my 14.3.2.4 version HDX.
Can I ?
by the way, I cannot find a step-by-step twrp install procedure.
If someone posts a youtube video, it will be awesome.
Click to expand...
Click to collapse
No, you need to downgrade to a firmware version older than x.3.2.4.
http://forum.xda-developers.com/showthread.php?t=2782159
EncryptedCurse said:
No, you need to downgrade to a firmware version older than x.3.2.4.
http://forum.xda-developers.com/showthread.php?t=2782159
Click to expand...
Click to collapse
Thank you for the answer.
So , so far no easy way.
Apollo first release of TWRP started at .0 flashed renamed files each increment up to and including .2.4 I know I can redo the downgrade and anything else I need to do once I get a usable ui
well like a dumbA I tried to upgrade via rename bin to zip got to .2.4 lost any recovery and black screen.... I do have root and adb shell permission and it does boot ,charge etc. Just no display for most part like any launcher .. ( I still got super user prompt for ADB shell )...I also wiped data for all user and system apps via titanium backup not sure if that made black screen or not .... need to flash stock .2.4 recovery? To fix black screen? Or do I need to push a Specific file ? That of which I do not know the details of . Because I don't know which files would have been deleted by titanium backup . The device has been sitting for a few weeks now I figure it's time to get it up and running any help would be appreciated thanks
jimyv said:
Apollo first release of TWRP started at .0 flashed renamed files each increment up to and including .2.4 I know I can redo the downgrade and anything else I need to do once I get a usable ui
well like a dumbA I tried to upgrade via rename bin to zip got to .2.4 lost any recovery and black screen.... I do have root and adb shell permission and it does boot ,charge etc. Just no display for most part like any launcher .. ( I still got super user prompt for ADB shell )...I also wiped data for all user and system apps via titanium backup not sure if that made black screen or not .... need to flash stock .2.4 recovery? To fix black screen? Or do I need to push a Specific file ? That of which I do not know the details of . Because I don't know which files would have been deleted by titanium backup . The device has been sitting for a few weeks now I figure it's time to get it up and running any help would be appreciated thanks
Click to expand...
Click to collapse
Well, if you have adb access and root, you can try this
jeryll said:
Well, if you have adb access and root, you can try this
Click to expand...
Click to collapse
actually I had seen this and had thought I might give that a shot but I do not have any recovery the flash of. 2.4 borked the recovery ..I know this because I tried to boot into it several times before flashify geek out on my paid subscription because my Google stopped working. That's why I attempted to wipe the data for all the apps. So I can attempt to use flashify to restore stock recoveryI believe it was when I picked option in Titanium Backup to wipe all data for system and user apps. Not really because of the fact I did not have a functioning recovery. I do not believe because I had rebooted the serval times and still had a working system until I wiped the data. Maybe if I had a copy of the stock image recovery I could attempt to flash it then try that...? I did extract the .2.4 files but didn't spot recovery image
jimyv said:
actually I had seen this and had thought I might give that a shot but I do not have any recovery the flash of. 2.4 borked the recovery ..I know this because I tried to boot into it several times before flashify geek out on my paid subscription because my Google stopped working. That's why I attempted to wipe the data for all the apps. So I can attempt to use flashify to restore stock recoveryI believe it was when I picked option in Titanium Backup to wipe all data for system and user apps. Not really because of the fact I did not have a functioning recovery. I do not believe because I had rebooted the serval times and still had a working system until I wiped the data. Maybe if I had a copy of the stock image recovery I could attempt to flash it then try that...? I did extract the .2.4 files but didn't spot recovery image
Click to expand...
Click to collapse
if you need recovery.img for Thor here is one, confirmed its working here
if you need stock recovery.img for Apollo here is one + md5 file here, its for 14.3.1.0 (md5 hash: acb175637241e6ecaf6dfef5ba7f343b)
jeryll said:
if you need recovery.img for Thor here is one, confirmed its working here
if you need stock recovery.img for Apollo here is one + md5 file here, its for 14.3.1.0 (md5 hash: acb175637241e6ecaf6dfef5ba7f343b)
Click to expand...
Click to collapse
Apollo first release of TWRP started at (.0) flashed renamed files each increment up to and including( .2.4 )I know I can redo the downgrade and anything else I need to do once I get a usable ui
not unless the recovery is black screen also. What is strange is when it is booted and I tried adb shell I did get su prompt ,,, just no launcher or notification bar etc..this is what I'm thinking let me know if I am mistaken. I should grab and flash a stock recovery image via the same as flashing this recovery with PC. Push. 3.2 build prop file to system then try this. http://forum.xda-developers.com/show....php?t=2793253 with .2.4 WiFi was off before black screen and OTA had been re- enabled I believe.and this is probably important to I do actually have a lock screen. And poweroff menu I am going to try that command now..
access denied going to reboot everything and try again
this is double posted in main thread with @ggow
Maybe a silly or noob question, but I have no answer (maybe I missed it although I read this thread) ..
I'm on TWRP 2.8.1.0 (and have Nexus 2.0.5). Is there an easy update way to 2.8.5.0 ? I can't imagine that I've to go back to stock rom ?!
Bruder Torgen said:
Maybe a silly or noob question, but I have no answer (maybe I missed it although I read this thread) ..
I'm on TWRP 2.8.1.0 (and have Nexus 2.0.5). Is there an easy update way to 2.8.5.0 ? I can't imagine that I've to go back to stock rom ?!
Click to expand...
Click to collapse
It's as simple as flashing the new image.
This is no different than any other device.
I thought the root for 4.5.2 and there's no root for 4.5.3 this is why I didn't update and disabled OTA. How can this method is for 4.5.3 only and it requires root? I think I miss something here. Please, help me to get it
i know this is a newer phone but i'm still pretty surprised i haven't been able to find anyone that's rooted it yet. i've been all over the internet it seems. this is the :
Samsung Galaxy J3(6)
SM-J320VPP
Android 6.0.1 Marshamllow
Verizon pre-paid plan/network
i see lots of videos and guides for other j320f or j320p (close but no cigar) and nothing works. what i've tried so far:
- Dev mode enabled, USB debugging and OEM unlocked.
- any/all 1 click root apps. none worked, and i'd like to avoid these anyway unless you know it works 100% for my version. at this point i'll try anything.
- recovery / flash superSU. only i haven't even gotten past flashing a recovery. i've tried several different versions of Odin with several different versions of recovery .tar's and for each combination i've tried Odin simply fails. big red FAIL button in upper left corner. sadness. this seems like what i need help with. i have SuperSU downloaded so if i can just get a custom recovery working for my phone i'm hoping it's a simple process from there of booting into the custom recovery and then installing the SuperSU. presto.
is there no hope? is there no tested, confirmed working recovery that i can flash to my phone using Odin? i've tried Odins 3.07, 3.09, and 3.11.1. various custom recovery .tars but the only one i know for sure is the J2 version official from TWRP's website (yes i know it says J2 but someone on another thread said it's similar enough to someone ELSE's model "j320f" or something so i gave it a shot) the other recovery .tars i tried are suspect since they had generic names "recovery.tar" and were downloaded from links provided in many different "guides" that i've googled.
internet, you have failed me. thus do i issue this challenge to all those mighty phone hackers of the land. come forth and slay the evil giant that is my phone's ludicrous security (seriosuly how is this even a thing still in 2016. my phone can do so much more, so much better but for these shenanigans).
thanks so much in advance!
EDIT: not sure about the bootloader. i may be a complete idiot. yes. ok. i'm onto something. gonna post this anyway for any other poor soul that has this version phone, but i think Odin's probably failing because the bootloader is still locked. and Samsung doesn't make this easy like motorola or HTC. T_T. once more into the fray! i'll see if i can't track down a method for unlocking the bootloader on my phone. should i return victorious i'll go ahead and share my steps with the rest of the class.
EDIT2: there is no waking from this nightmare. i dig and dig and dig and can find no root. *sigh*
-- i've got android studio installed. and the java SDK platform-tools which contains the adb.exe, fastboot.exe, etc.
-- something i should explain here: in all these guides whenever there's a step that requires the phone to be connected to the PC, it simply says to, you know...connect your phone. but MY phone by default only uses the cable for battery charging. i have to (on my phone) swipe down from the top, select the "connected for charging" message bringing up "Use USB For" options, then select "Transferring media files" option. THEN my phone shows up both in my windows explorer and displays as a device when i run "adb devices".
--when i run "adb reboot bootloader" this does the same thing as holding down pwr/home/vol down - phone boots up into a blue (teal?) background with a large down arrow in center, below that it says "downloading...do not turn off target". in the upper left are several lines of system font style text:
ODIN MODE
PRODUCT NAME: SM-J320VPP
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF*
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A1, P1*
SECURE DOWNLOAD: ENABLE
*the R's above may be A's or vice versa...hard to read font. sorry
--but as soon as i've rebooted into this mode, my phone disappears from adb devices' list of devices attached. regardless when i run the "fastboot oem unlock" command from the adb shell on my PC at this point i get the infamous "waiting for any device" message and then, of course, nothing....forever. i've also installed PDAnet but i think it's hitting the same road block where my phone is only using the cable for battery charging and i can't toggle that option from ODIN MODE. there's also a "USB Configuration" choice under development options on the phone that has the same options as "Use USB for" but this doesn't stick when booting into ODIN MODE. sadness. i need to retire my brain thoughts at this point. will post TL;DR. you're a saint of geeks if you've made it through my WoT to here.
EDIT3: just an observation - the only thing (so far) that will detect my phone in ODIN MODE is ODIN itself. is there a way to use ODIN to unlock the bootloader?
TL;DR: i think odin is failing when attempting to flash because of locked bootloader. need help with unlocking bootloader first? phone defaults to use USB cable for charging only so i CAN change that to MTP while phone is on normal and then run "adb reboot bootloader" but then phone vanishes from adb devices list once it reboots (and cable is then only charging). thus, cannot run "adb fastboot oem unlock" cuz it hangs displaying "waiting for any device" -- can i unlock the bootloader on this phone? or did i buy a phone that's IMPOSSIBLE TO ROOT!?!?
I have the same problem! I need to root it to install the Patch to change from CDMA to GSM! Because I tried without root and it tells me "E: Signature verification failed"
Thanks
Still nothing?
This is starting to look hopeless
we need the stock recovery.img to be able to mod it and flash it through odin. the recovery for the verizon version does not match so odin wont allow it. i asked on sammobile and they said verizon only releases ota on the device. so idk what to do. perhaps someone with knowledge on this will help.
so far what ive figured out our situation is:
we need root to get root.
more specifically we need root to pull the recovery and then mod that recovery with twrp and use twrp to gain root. The root methods that worked for the other variant SM-J320P dont appear to work for ours, probably due to having android 6.0.1
till we get root we are stuck. the rest is easyish
News?
There is nowbody that had been rooted his J3 Verizon yet?? We need help with this trouble!
In this forum (http://forum.xda-developers.com/android/help/galaxy-j3-sm-j320vpp-configuring-cdma-t3414049) Sergio said:
" try root with this root is only for Snapdragon 410 MSM8916
http://forum.gsmhosting.com/vbb/f723...t1994-1946985/ "
The J320VPP has a "1.2 GHz, Quad-Core". There is no place that sais it's a "Qualcomm Snapdragon 410 Msm:8916" processor. You think this suggestion could work?
NerdmastaX said:
we need the stock recovery.img to be able to mod it and flash it through odin. the recovery for the verizon version does not match so odin wont allow it. i asked on sammobile and they said verizon only releases ota on the device. so idk what to do. perhaps someone with knowledge on this will help.
so far what ive figured out our situation is:
we need root to get root.
more specifically we need root to pull the recovery and then mod that recovery with twrp and use twrp to gain root. The root methods that worked for the other variant SM-J320P dont appear to work for ours, probably due to having android 6.0.1
till we get root we are stuck. the rest is easyish
Click to expand...
Click to collapse
I think I've managed to get the recovery.img with KIES... However flashing the image I've extracted doesn't work but if anyone is ready to help me port a recovery I might try !
Whusky said:
I think I've managed to get the recovery.img with KIES... However flashing the image I've extracted doesn't work but if anyone is ready to help me port a recovery I might try !
Click to expand...
Click to collapse
im gonna try and do a reflash with kies and grab that file myself, ill work a bit on it because i love this phone but no basic root is driving me insane. if you can beat me to posting tell me how you got the file, otherwise ill post here once i find out. I'm not a top of the line developer but i can work my way around and try my best since nobody else is offering to help.
wish me luck.
sorry for the double post but got the files via the verizon software assistant no problem. it ended up in C:\Users\YOURNAME\AppData\Roaming\Verizon_AR\SM-J320VPP_J320VPPVRU1APC3_FACTORY for me, and even decrypted and unzipped itself for me, now we just need to mod a custom thingy into those files and we can work towards rooting. so as i sit here and watch my phone finish flashing back to factory i will look into how we can mod the recovery. if someone is capable of doing it faster i can upload the files very quickly as its only 1.4 gb
well turns out verizon locks the flashing with signature verfication. so unless verizon changes or root is found for marshmellow there will be zero possible root for this phone.
NerdmastaX said:
sorry for the double post but got the files via the verizon software assistant no problem. it ended up in C:\Users\YOURNAME\AppData\Roaming\Verizon_AR\SM-J320VPP_J320VPPVRU1APC3_FACTORY for me, and even decrypted and unzipped itself for me, now we just need to mod a custom thingy into those files and we can work towards rooting. so as i sit here and watch my phone finish flashing back to factory i will look into how we can mod the recovery. if someone is capable of doing it faster i can upload the files very quickly as its only 1.4 gb
Click to expand...
Click to collapse
Hi I'm currently rooted with TWRP 3.0.2 recovery and mabey this might help http://forum.xda-developers.com/general/help/samsung-galaxy-j3-sm-j320fn-how-to-root-t3369511
Sparko612 said:
Hi I'm currently rooted with TWRP 3.0.2 recovery and mabey this might help http://forum.xda-developers.com/general/help/samsung-galaxy-j3-sm-j320fn-how-to-root-t3369511
Click to expand...
Click to collapse
verizon blocks flashing of modified recoveries. so unless someone finds a root exploit for marshmallow we will have no luck.
Has the kingroot method worked for root on your device ??
NerdmastaX said:
we need the stock recovery.img to be able to mod it and flash it through odin. the recovery for the verizon version does not match so odin wont allow it. i asked on sammobile and they said verizon only releases ota on the device. so idk what to do. perhaps someone with knowledge on this will help.
so far what ive figured out our situation is:
we need root to get root.
more specifically we need root to pull the recovery and then mod that recovery with twrp and use twrp to gain root. The root methods that worked for the other variant SM-J320P dont appear to work for ours, probably due to having android 6.0.1
till we get root we are stuck. the rest is easyish
Click to expand...
Click to collapse
Hi to all, im new here and i am having the exact same problem! You say that there has to be a root specifically for the 6.0.. So i found that in the Chainfire page they have this https://download.chainfire.eu/986/CF-Root/CF-Auto-Root/CF-Auto-Root-j3lteusc-j3lteusc-smj320r4.zip already (i dont know if i can post links, so if i cant, sorry), it is marshmallow but the model is J320R4, so i was wondering if this could be the solution. i'll be waiting here for a response, i seriously love this phone :c
MetAJFA said:
Hi to all, im new here and i am having the exact same problem! You say that there has to be a root specifically for the 6.0.. So i found that in the Chainfire page they have this https://download.chainfire.eu/986/CF-Root/CF-Auto-Root/CF-Auto-Root-j3lteusc-j3lteusc-smj320r4.zip already (i dont know if i can post links, so if i cant, sorry), it is marshmallow but the model is J320R4, so i was wondering if this could be the solution. i'll be waiting here for a response, i seriously love this phone :c
Click to expand...
Click to collapse
No, this is not the solution. When using a utlity like CF Auto Root, it must be specific to your model / carrier. Trying to install that will do 1 of 2 things.
1) Just fail in Odin
or
2) Soft brick your device
Since VZW doesn't bother to put out the full firmware files to reflash the device, it's not worth attempting without having the backup plan of the original firmware to flash via Odin.
an twrp is already available for j320p u can try to root your device using it
es0tericcha0s said:
No, this is not the solution. When using a utlity like CF Auto Root, it must be specific to your model / carrier. Trying to install that will do 1 of 2 things.
1) Just fail in Odin
or
2) Soft brick your device
Since VZW doesn't bother to put out the full firmware files to reflash the device, it's not worth attempting without having the backup plan of the original firmware to flash via Odin.
Click to expand...
Click to collapse
Understood, thank very much you for clearing that out. Since all this is pretty much a kick in the butt, do you think there will be some kind of solution to this or should we just lose hope? :/
can Someone here help me with this.
someone wrote:
I have the same problem, I already got 4G LTE data with the correct APN and also I change to lte/gsm with the help of a network app and with commands in adb shell :
pm clear com.android.providers.telephony
settings put global preferred_network_mode 9
settings put global preferred_network_mode1 9
settings put global preferred_network_mode2 9
Click to expand...
Click to collapse
but i dont know how to initiate this adb mode in the phone. anyone?
anyone fix ?
i have few units J320VPP same problem .. searching for service .
That's a Verizon device with a locked bootloader, you cannot try twrp or modified files meant for 320f or other models on this one.
Sent from my SM-N920G using Tapatalk
So has anyone found any luck with this device? It's driving me crazy not having root
Hello guys,
I have a problem with my OnePlus X, and it would be lovely if I could get some help or advice from you guys.
> To provide some slight background, I purchased this off of eBay to complete my OnePlus collection. Most listings were above what OnePlus originally sold the phone for, but I found one for $125 in good condition by a seller with a good rating. It was advertised as soft-bricked, with Fastboot in working order. I thought "no problem, I'll just reflash it and be on my merry way."
Now onto the issue. I received it, charged it up, and attempted flashing the official recovery provided by OnePlus, but something is not working. I've been tinkering with Android for a number of years now, so I troubleshooted as much as I could, but to no avail.
1. Starting with device unplugged and powered off, boot into fastboot
2. Plugged into the computer, and ran `fastboot devices` to ensure it's recognized. After that, I flashed the recovery.img that was on my desktop with `fastboot flash recovery recovery.img` (yes I was in the correct directory). It looked successful. Picture of cmd response text at the following imgur album: /a/25DEQ (sorry I cannot post full links yet, had to create a new xda profile, forgot my old one :/
3. Unplugged the phone, powered off, Volume Down + Power to attempt boot into recovery. Failure. It just turns on with the 1+ logo, and quickly flashes the 'android' logo at the bottom. It stays like this until I manually power off.
I'm a bit stumped I have to admit. I would greatly appreciate any input you folks have. Thank you.
AndriyEtch said:
Hello guys,
I have a problem with my OnePlus X, and it would be lovely if I could get some help or advice from you guys.
> To provide some slight background, I purchased this off of eBay to complete my OnePlus collection. Most listings were above what OnePlus originally sold the phone for, but I found one for $125 in good condition by a seller with a good rating. It was advertised as soft-bricked, with Fastboot in working order. I thought "no problem, I'll just reflash it and be on my merry way."
Now onto the issue. I received it, charged it up, and attempted flashing the official recovery provided by OnePlus, but something is not working. I've been tinkering with Android for a number of years now, so I troubleshooted as much as I could, but to no avail.
1. Starting with device unplugged and powered off, boot into fastboot
2. Plugged into the computer, and ran `fastboot devices` to ensure it's recognized. After that, I flashed the recovery.img that was on my desktop with `fastboot flash recovery recovery.img` (yes I was in the correct directory). It looked successful. Picture of cmd response text at the following imgur album: /a/25DEQ (sorry I cannot post full links yet, had to create a new xda profile, forgot my old one :/
3. Unplugged the phone, powered off, Volume Down + Power to attempt boot into recovery. Failure. It just turns on with the 1+ logo, and quickly flashes the 'android' logo at the bottom. It stays like this until I manually power off.
I'm a bit stumped I have to admit. I would greatly appreciate any input you folks have. Thank you.
Click to expand...
Click to collapse
Which recovery u tried? Did u knOw the previous os version details?
And try this after flashing recovery in fastboot, boot into it directly by giving a cmd "fastboot boot recovery.img"
cva_kabil said:
Which recovery u tried? Did u knOw the previous os version details?
And try this after flashing recovery in fastboot, boot into it directly by giving a cmd "fastboot boot recovery.img"
Click to expand...
Click to collapse
Hi! Thank you for your reply
I posted this same question on the /r/oneplus subreddit, and received a quick and helpful walkthrough. Turns out part of the problem was that the micro-usb port on the phone itself is a bit unreliable. I haven't investigated too deeply, but it took a while to find a position for the wire to maintain a stable connection. I suspect this may be why the device was bricked in the first place (disconnect when flashing rom/kernel/etc.)
Anyways, for some reason flashing the stock recovery to the phone was just not working. The guy on reddit recommended trying TWRP, and that worked immediately. However, at that point, I had no idea what the history of the phone was or what OS was on it before, what firmware it had. I tried installing the official CM13 and then Sultan's CM13 with no luck. What *did* work was Oxygen OS 2.2.6.
At this point I'm stuck yet again though... The Marshmallow OTA (3.1.3) in the OS shows as available for download, but when I try to install the download only gets to 22% and then stops. Flashing the 3.1.3 OTA.zip available on OnePlus' support site doesn't work in TWRP, and when I try to flash stock recovery, it doesn't work.. don't know what else to try.
AndriyEtch said:
Hi! Thank you for your reply
I posted this same question on the /r/oneplus subreddit, and received a quick and helpful walkthrough. Turns out part of the problem was that the micro-usb port on the phone itself is a bit unreliable. I haven't investigated too deeply, but it took a while to find a position for the wire to maintain a stable connection. I suspect this may be why the device was bricked in the first place (disconnect when flashing rom/kernel/etc.)
Anyways, for some reason flashing the stock recovery to the phone was just not working. The guy on reddit recommended trying TWRP, and that worked immediately. However, at that point, I had no idea what the history of the phone was or what OS was on it before, what firmware it had. I tried installing the official CM13 and then Sultan's CM13 with no luck. What *did* work was Oxygen OS 2.2.6.
At this point I'm stuck yet again though... The Marshmallow OTA (3.1.3) in the OS shows as available for download, but when I try to install the download only gets to 22% and then stops. Flashing the 3.1.3 OTA.zip available on OnePlus' support site doesn't work in TWRP, and when I try to flash stock recovery, it doesn't work.. don't know what else to try.
Click to expand...
Click to collapse
Root your device using twrp or kingoroot method then install flashify and try to flash stock recovery using flashify. .. Tht may work.
Flashing 3.1.3 via official twrp ll not work... Cos ur bootloader version, U can do it only with stock recovery or u need to edit meta data file. Or u can flash stock recovery img file by twrp
cva_kabil said:
Root your device using twrp or kingoroot method then install flashify and try to flash stock recovery using flashify. .. Tht may work.
Flashing 3.1.3 via official twrp ll not work... Cos ur bootloader version, U can do it only with stock recovery or u need to edit meta data file. Or u can flash stock recovery img file by twrp
Click to expand...
Click to collapse
Thanks I'll give those a shot once I'm home from work! Quick question about editing the META INF. I've heard that doing so risks hard-bricking the device. Is that true?
AndriyEtch said:
Thanks I'll give those a shot once I'm home from work! Quick question about editing the META INF. I've heard that doing so risks hard-bricking the device. Is that true?
Click to expand...
Click to collapse
I dont think so... I hv not tried... But as of i know if u edit it wrongly, u will not be able to flash that file. . Try others methods first... Hope it works
AndriyEtch said:
Thanks I'll give those a shot once I'm home from work! Quick question about editing the META INF. I've heard that doing so risks hard-bricking the device. Is that true?
Click to expand...
Click to collapse
Hi OP, sorry for joining late to the party
So the thing is the OnePlus X is at opposites now since the official MM release on 29th September. The thing is if you are running the old bootloader (OxygenOS 2.x.x) or any ROM based on it, then the New TWRP will not boot, neither will the Stock Recovery that is hosted on the OnePlus download section for the X, which is where i assume you download the stock recovery from, right ? Also note that the official recovery hosted on the TWRP website is also yet to be updated, we're working on that.
So you are on the old Bootloader. Simple stuff. I have posted my guide a lot of time around the forums, its gained a lot of merit. You could follow it for your update process. I'll leave a link below. In case you wanna verify that the old bootloader is causing the issue my Index Thread pinned in the general section has a link for the Stock recovery for Old bootloader, try flashing that via fastboot, if it successfully boots then you're set.
Comprehensive guide to Update to Marshmallow Bootloader
The above guide is centered to the thread i have posted it on but the process is 99% the same. In the end, you could just stay with Oxygen OS 3.1.3, or flash any custom ROM based on the new Bootloader.
Now regarding your query about editing the META of the ROM, well Yes to an extent it IS risky if you ain't careful because my guide guides you to delete the one single line that removes the device check, so as long as you use the modified zip on OnePlus X only, there will be no issues.
Let me know for any further clarifications, also you're welcome to join our support group on Telegram, all of our developers are active there. Ping me (@ mellogang_unite) for an invite