Related
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
2ConHeo said:
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
Click to expand...
Click to collapse
who said so?
tested and working
that normal check point is a pain in ass to execute in the first place
Thanks a ton.....It helped a lot
thank u...
thank
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
hammer77 said:
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
Click to expand...
Click to collapse
did you solve the problem ?
Rajdip said:
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Click to expand...
Click to collapse
Link not working.
Using another mi flash tool also get nothing. How do I know I get into fastboot?
Already pressed volume down and power button but nothing happened. And checking fastboot devices nothing comes up. Also in mi flash tool nothing.
Hello guys, I'm new around here.
This happened the day before yesterday, I had RRemix 6.1 installed on my phone, all of a sudden, mid use, most of the apps stopped responding and nothing was working, so I shut the phone down. Then when I tried to turn on the phone, it wouldn't get past the RRemix loading screen. I waited for a while, then I tried getting into TWRP recovery. In that, the TWRP logo would come then it would suddenly switch to loading the RRemix.
As the RRemix wouldn't open up, I tried flashing MIUI10 global beta through the fastboot method using MiFlash Tool, the flash wouldn't complete so I flashed it manually using fastboot commands through CMD. Then the phone just switched off completely, the display doesn't show a single thing. After a while, randomly, while it was connected to my PC, the red LED started blinking and in Device Manager the device was detected as "Qualcomm HS-USB QDLoader 9008". I searched around and found that this was supposed to be EDL mode.
So, I fired up MiFlash Tool again and tried flashing MIUI10 Global Beta onto it, it returned a message that the flash was successful. The phone is supposed to automatically boot up after the flash according to Xiaomi, but my phone didn't. Now what can I do ? I tried flashing the MIUI9 Stable release too, but even that didn't work.
Thanks a lot.
thereelaman said:
Hello guys, I'm new around here.
This happened the day before yesterday, I had RRemix 6.1 installed on my phone, all of a sudden, mid use, most of the apps stopped responding and nothing was working, so I shut the phone down. Then when I tried to turn on the phone, it wouldn't get past the RRemix loading screen. I waited for a while, then I tried getting into TWRP recovery. In that, the TWRP logo would come then it would suddenly switch to loading the RRemix.
As the RRemix wouldn't open up, I tried flashing MIUI10 global beta through the fastboot method using MiFlash Tool, the flash wouldn't complete so I flashed it manually using fastboot commands through CMD. Then the phone just switched off completely, the display doesn't show a single thing. After a while, randomly, while it was connected to my PC, the red LED started blinking and in Device Manager the device was detected as "Qualcomm HS-USB QDLoader 9008". I searched around and found that this was supposed to be EDL mode.
So, I fired up MiFlash Tool again and tried flashing MIUI10 Global Beta onto it, it returned a message that the flash was successful. The phone is supposed to automatically boot up after the flash according to Xiaomi, but my phone didn't. Now what can I do ? I tried flashing the MIUI9 Stable release too, but even that didn't work.
Thanks a lot.
Click to expand...
Click to collapse
Buy a new one or wait till miui 10 release
yohen_auroville said:
Buy a new one or wait till miui 10 release
Click to expand...
Click to collapse
i.e. I should buy a new phone ?
thereelaman said:
Hello guys, I'm new around here.
This happened the day before yesterday, I had RRemix 6.1 installed on my phone, all of a sudden, mid use, most of the apps stopped responding and nothing was working, so I shut the phone down. Then when I tried to turn on the phone, it wouldn't get past the RRemix loading screen. I waited for a while, then I tried getting into TWRP recovery. In that, the TWRP logo would come then it would suddenly switch to loading the RRemix.
As the RRemix wouldn't open up, I tried flashing MIUI10 global beta through the fastboot method using MiFlash Tool, the flash wouldn't complete so I flashed it manually using fastboot commands through CMD. Then the phone just switched off completely, the display doesn't show a single thing. After a while, randomly, while it was connected to my PC, the red LED started blinking and in Device Manager the device was detected as "Qualcomm HS-USB QDLoader 9008". I searched around and found that this was supposed to be EDL mode.
So, I fired up MiFlash Tool again and tried flashing MIUI10 Global Beta onto it, it returned a message that the flash was successful. The phone is supposed to automatically boot up after the flash according to Xiaomi, but my phone didn't. Now what can I do ? I tried flashing the MIUI9 Stable release too, but even that didn't work.
Thanks a lot.
Click to expand...
Click to collapse
Try flash an older stable rom from miui and hope one boots so u can use phone or flash again to another rom. Download a few different ROMs try them all maybe one is bound to boot up
Test point Only then you can recover your phone.
Gabitozero said:
Test point Only then you can recover your phone.
Click to expand...
Click to collapse
I don't exactly understand what you mean, if I got it into EDL, what's the point of Test Point method, and I don't really understand what the Test point method does.
It will be real helpful of you to explain that to me..
Thanks.
Test point are two point in the mother board.
If you communicate the two points with a wire the phone enters in bootloader mode and you can flash the rom again.
(google test point redmi note 4 and you will get a full imaged guide)
Only for snapdragon version.
I did it succesfully one year ago.
magnus48 said:
Test point are two point in the mother board.
If you communicate the two points with a wire the phone enters in bootloader mode and you can flash the rom again.
(google test point redmi note 4 and you will get a full imaged guide)
Only for snapdragon version.
I did it succesfully one year ago.
Click to expand...
Click to collapse
I did try that, but my phone already shows up as the "Qualcomm HS-USB QDLoader 9008" so it didn't really make any difference, the flashing was successful and the phone still didn't start.. Is there anything else that I can try ?
Install miui 9 with flashtool and it should be fine,
https://sourceforge.net/projects/firmware-global-mido/
Tell me if it worked :good:
BK said:
Install miui 9 with flashtool and it should be fine,
https://sourceforge.net/projects/firmware-global-mido/
Tell me if it worked :good:
Click to expand...
Click to collapse
When I downloaded that, WinRar showed a message that the file was corrupt.
And how do I flash this Firmware using Mi Flash Tool?
Thanks.
Try
Did you try to flesh recovery through ADB?
Alfonso13 said:
Did you try to flesh recovery through ADB?
Click to expand...
Click to collapse
My ADB was turned off, and my device won't turn on, how am I supposed to try that?
Thanks..
Do you try this?
https://forum.xda-developers.com/redmi-note-4/how-to/guide-how-to-edl-flashing-redmi-note-4-t3795831
Alfonso13 said:
https://forum.xda-developers.com/redmi-note-4/how-to/guide-how-to-edl-flashing-redmi-note-4-t3795831
Click to expand...
Click to collapse
That method only works if I could access fastboot, sadly I can't..
same issue i got some days before i removed the back case and remove the battery connection and flashed miui 10 beta without battery connect from mi flash tool i got my same issue but the benefit is fastboot file is recovered after that i flashed orange fox r7 then format all data then install miui10 from orange fox after that phone is booted successfully but persist issue is there (cant receive calls, notification bar not available) but after that i download the miui10 from miui updater (setting-About Phone-System Update-Download Updates) after download the rom flashed from updater reboot the device and success! try this method may be it will works for you also
wont turn on
hey, did u resolve ur problem here? i have redmi 4 prime and stuck in edl mode now.
and samae as your problem here, always success but my phone wont to turn on again, i try every solution in this forum and other. the result still same til now, 3 days already and still same. please help me, before my mom kill me cause this phone wont turn on.
sorry for bad english
hi everyone, so i am having an issue with my xiaomi mi a1. I rooted the device in order to install the pixel 3 g-cam, yesterday i tried to unroote it and to lock its bootloader but as i was doing this, the system was destroyed. i flashed the device and got it working, the my GF tried unrooting it from magisk app and i dont kow what happened it appeared th co command symbol. I flashed it again and everything was normal util the mi screen appeared and then the android one logo show. the next thing that happended was the advise of corruption, the mi screen and android logo. again and again so on so forth. i've flashed the device, several times and nothing changes. i've locked and unlocked the bootloader, and nothing. I even tried stock recovery options but resuts in the same. what esle can I
do ?
I may be late but something like this happened to me as well.
I got my phone bricked and because I was in school the phone was stuck on booting screen for a long time. When I got back the phone's battery was dead. I put it on the charger and it wasn't doing anything, all of a sudden it starts to blink red light (sign it's in edl mode) I don't quite remember if I got into the fastboot and then flashed miui 9 beta with a pc through the miui application idk what it's called and after the installation was over it worked. It could be a problem with not being in the right mode (as I said previously it's either edl or fastboot) or it could be because of a problem with that miui version
Maybe Anti-Roll back problem?
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
Tools Needed:
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
Tested! Howto Unbrick Redmi 9C (angelica) without using auth account
This blog has move and will not be update again.For new update please open ▶▶
langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
Very good guide.
Thank you very much
No problem hope it'll help a few guys out there sure helped me a lot
Thanks 100% it worked for me
Munemugo said:
Thanks 100% it worked for me
Click to expand...
Click to collapse
Cool glad I could help
I'm using a Redmi 9c I tried to unlock it but failed in the process. Later I get absolutely no response from the phone, I cant open fast boot or recovery. I tried connecting it to the pc but it shows the same exact problem you are facing. I tried all USB ports and switched cables back and forth but no success. I tried pressing volume up, down and all sorts of combinations, still no success. Any fix for this?
Cat8191 said:
I'm using a Redmi 9c I tried to unlock it but failed in the process. Later I get absolutely no response from the phone, I cant open fast boot or recovery. I tried connecting it to the pc but it shows the same exact problem you are facing. I tried all USB ports and switched cables back and forth but no success. I tried pressing volume up, down and all sorts of combinations, still no success. Any fix for this?
Click to expand...
Click to collapse
Follow the guide step by step, it should work and if doesn't then you should try disconnecting the battery
great guide on fixing a hard brick.
My compliments and thank you very much indeed to you for writing this very good and detailed guide. My Redmi 9c bootlooped after trying to install Lineage OS, of course no way to go to fastboot mode anymore (I'm a rather experienced custom ROM installer though). Although I asked for help in a separate thread, I got no answer for a couple of months now until I found this thread. I never gave up my Redmi 9C so I now followed you instructions and with success!! I will refer people to your thread of course. There is no doubt many can save their phone by reading you instructions.
JoostA said:
My compliments and thank you very much indeed to you for writing this very good and detailed guide. My Redmi 9c bootlooped after trying to install Lineage OS, of course no way to go to fastboot mode anymore (I'm a rather experienced custom ROM installer though). Although I asked for help in a separate thread, I got no answer for a couple of months now until I found this thread. I never gave up my Redmi 9C so I now followed you instructions and with success!! I will refer people to your thread of course. There is no doubt many can save their phone by reading you instructions.
Click to expand...
Click to collapse
Thanks my guy appreciate the appreciation. Glad I could help
Dawood99 said:
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
Tools Needed:
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
Tested! Howto Unbrick Redmi 9C (angelica) without using auth account
This blog has move and will not be update again.For new update please open ▶▶
langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
Click to expand...
Click to collapse
I can do this for a Redmi 9a?
Using the same download agent
Hello, i did it but i did the mistake to do a FORMAT AND DOWNLOAD.
No my phone juste diplsay the Redmi logo a few second then power off.
I'm still able to go on the Sp Flash Tools and flash again. Anyone could help me please ?
hello sir so i recently hard bricked my redmi 9c nfc by installing older MIUI version that it came with. It was just black screen all the time and nothing. Tried this guide, mtk bypass tool worked but on sp flash tools i am greeted with this message.
Everything is acting like expected according to the video, but wheb I have used the mediatek bypass tool with green OK and stuff and when i start to press download on the smart phone flash tool, it just stucks at 0. Nothing happens, except that everything is greyed out and is trying to load it. If i boot my phone myself with the brom it says hint:add a authentication file or ask for help. I cant manage to finish it.
The error in Mediatek bypass tool about handshaking error is probably because i did it several times, because i didnt manage to load smartphone flash tool as attached below
This is my last hope to recover my brandew phone. Thanks for the good tutorial, but it didt work out. If someone could save me then I would be grateful
erikmanner said:
Everything is acting like expected according to the video, but wheb I have used the mediatek bypass tool with green OK and stuff and when i start to press download on the smart phone flash tool, it just stucks at 0. Nothing happens, except that everything is greyed out and is trying to load it. If i boot my phone myself with the brom it says hint:add a authentication file or ask for help. I cant manage to finish it.
The error in Mediatek bypass tool about handshaking error is probably because i did it several times, because i didnt manage to load smartphone flash tool as attached below
This is my last hope to recover my brandew phone. Thanks for the good tutorial, but it didt work out. If someone could save me then I would be grateful
Click to expand...
Click to collapse
I had exactly the same issue, go into the me
Go into the options menu and go to connections, then select usb, then do the steps as is
Dawood99 said:
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
Tools Needed:
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
Tested! Howto Unbrick Redmi 9C (angelica) without using auth account
This blog has move and will not be update again.For new update please open ▶▶
langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
Click to expand...
Click to collapse
I cannot thank you enough, thank you for putting this here
Works with some tweaks but got it running
Thank You soooo much for this tutorial, it worked for me and saved me alot of trouble.
i want to ask one thing: can this method be used on a locked bootloader?
Mr.PotatoChips said:
Thank You soooo much for this tutorial, it worked for me and saved me alot of trouble.
i want to ask one thing: can this method be used on a locked bootloader?
Click to expand...
Click to collapse
yes
I need help, after I used the Bypass MTK, my phone became unrecognizable by windows. It says Unknown USB Device.
bbboy4life said:
I need help, after I used the Bypass MTK, my phone became unrecognizable by windows. It says Unknown USB Device.
Click to expand...
Click to collapse
Install usb dk drivers 32bit or 64bit, install usb win32 tool
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
have to get someone with authorized account to fix it using edl flash tool, from next time dont use miflash and just extreact the rom zip and flash it with the bat file.
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
hey
I brought mi phone for my aunt and she is facing similar issues too. If you find any solutions do let me know.
ScarletSkies1234 said:
have to get someone with authorized account to fix it using edl flash tool, from next time dont use miflash and just extreact the rom zip and flash it with the bat file.
Click to expand...
Click to collapse
Yes, today, I have been looking for solutions and I see that paying someone with authorized account is the only way to get my phone back. :C ....I didn't know you could flash without the Mi flash tool, thanks, I will try in the future....
msgranger12 said:
hey
I brought mi phone for my aunt and she is facing similar issues too. If you find any solutions do let me know.
Click to expand...
Click to collapse
Hi, I told you that I fixed my phone with the "Xiaomi Pro Tool" (it's paid but cheap). Good luck!
ajanco said:
Yes, today, I have been looking for solutions and I see that paying someone with authorized account is the only way to get my phone back. :C ....I didn't know you could flash without the Mi flash tool, thanks, I will try in the future....
Click to expand...
Click to collapse
My friend tried to flash fastboot image using official android platform tools from google, build march 2022, it didn't work. Always failed when flashing the super partition. Fortunately, he decided to flash it with mi flash build 2020 (forgot which one), and it succeeded. I didn't believe it at first. Weird indeed. I believe xiaomi put something else to their fastboot binary in the mi flash.
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
Xiaomi Flash tool support EDL flashing too...try this version....and also install the Qualcomm driver.
Hello,
This problem has been going on for a while, and I just decided to try and tackle it again.
My phone is currently bootlooping.
Realme logo - "Orange state" your device has been unlocked and can't be trusted, it will reboot in 5 seconds.
It then reboots...Nothing.
I know what I need to do, but I can't get Windows to recognize the device. I've tried holding volume + and - at various times when the screen is black. I've tried volume - and power, I've tried vol + and power...Nothing works.
I can't even get it to turn off...No idea how to get Windows to recognize my device - Currently trying to get the Libusb filter wizard to see the phone to installed the drivers...I've also used the mtk thing too - But it never finds my device.
No idea what's going on here...
Searching for some advice in case I'm missing something simple...
If you cant boot into anything you need to unbrick your device.
Follow that guide, helped me many times...i already needed to unbrick that damn thing for about 20 times.
Keep that files on your pc for future needs, its big.
Realme 7 Scatter Firmware unbrick Via SP Flash tool No auth (New A.71)
Download Realme 7 scatter firmware flash file stock ROM, 100% free method to unbrick Realme 7 without authorized Oppo id
romprovider.com
And yes, sorry to tell you, but you will loose your data!
Givou said:
If you cant boot into anything you need to unbrick your device.
Follow that guide, helped me many times...i already needed to unbrick that damn thing for about 20 times.
Keep that files on your pc for future needs, its big.
Realme 7 Scatter Firmware unbrick Via SP Flash tool No auth (New A.71)
Download Realme 7 scatter firmware flash file stock ROM, 100% free method to unbrick Realme 7 without authorized Oppo id
romprovider.com
And yes, sorry to tell you, but you will loose your data!
Click to expand...
Click to collapse
Great, thank you for the tutorial. That one I haven't seen yet.
However, the BIG problem that I have is that I can't connect it to my PC. LIBUSB doesn't see the device, Windows doesn't see the device. and any software doesn't see the device.
My issue comes with holding the buttons to have my phone boot into the specific mode required - I can't get it to boot into anything other than a loop...