I have a Verizon LG G6 phone, and the screen keeps going black, then the power button won't bring it back on. I am able to boot it by holding vol down & power though. The back glass is cracked near the power button, but the power button itself (the circle) is fine. Has anyone heard of this happening? I have tried booting into safe mode, but the same thing happened there.
Related
Hi guys,
I tried to update my BONE STOCK Prime to the .28 update. I walked away for about a hour, came back and the screen is black, and nothing I do can turn the thing on.
I've done the following.
Held the power button from 2-120 seconds
Held Power Button + Vol Down from 10-120 Seconds
Pushed the Reset button for 30 seconds.
The only kind of response from the tablet I get is a vibration. The screen never turns on.
Does anybody have any other ideas that my get this thing started back up?
Hold vol up and down and power for a short while before the vibraation occurs. Then release vol up and you should be good. May take several trys.
Sent from my PG86100 using xda premium
Thanks for the suggestion, but it did not work.
Any other ideas out there?
let it drain completely so when holding power button it doesn't vibrate etc.
charge for 5 minutes. does red battery icon come on?
hold paperclip pinhole in for 30 seconds. release. does it boot or is it still black screen.
if still black screen, contact Asus. you may have it stuck in APX mode.
Hey, new guy here.
So about 2 weeks ago my EVO 4g LTE's power button started acting crazy. I would have to push it really really hard to make it turn on. Sadly it has gotten to where now it just doesn't turn the phone on at all. I have since downloaded an app from the market to use the volume keys to turn it on from sleep mode, but cannot turn it off without being able to turn it back on (the app only supports waking the phone up). I've taken it apart, cleaned it and still no luck. No matter how hard I press it, it just won't turn on. The button also no longer gives that slight "click" when pressing it.
I ordered a new button, took it apart, replaced the button and still nothing. It still doesn't even click. I'm wondering what the part underneath the power button is called. Would that be the power button flex cable. I'm speaking of the part the button actually touches to produce the power on/power off effect and the mild click it gives when pressed.
I bought the phone used and when I took it apart, it appeared to be tampered with at this same location. It looked like this section had a black coating on it where the power button would touch but had been rubbed/scrapped off, showing copper.
If anyone knows what this part is please let me know so I can order/replace it.
Thanks in advance
Hi All,
I have an LG Optimus G E970 on the AT&T network, all stock. I recently dropped it and, of course, the digitizer glass cracked. The screen still worked just fine, and I could turn it on and off without a problem but no touch at all. As I was trying to shut it down without using any buttons by just holding the power button, it started acting strangely. I would turn it off (screen timeout) by just pressing on the power button, but when I would wake it up (by again pressing the power button) the cap. buttons on the bottom would light up, but the screen would stay dark. I chalked it up to the digitizer being messed up.
I have since installed a new screen/digitizer assembly, and it works great when I turn on the phone. However, as soon as the screen goes to sleep, I get the same problem - cap. buttons light up, but the screen stays black. All the buttons are working, as I can here them clicking, and I can turn up the volume, etc, I just can't get the screen itself to light up.
Has anyone run across this problem, or have any suggestions? I've already, reluctantly, tried a hard reset, which did not solve the problem, as well as any other little fixes that I found in this and other forums. I'm thinking it's a software issue of some sort, since the screen and everything work great when the phone is on, but I don't really know. I wanted to see is there were any answers out here before I tried rooting and installing a new ROM, which might be problematic anyways if the screen doesn't come back on.
TIA,
George G.
So, I have an AT&T LG F6 here that my mom was using unlocked from AT&T to T-Mobile. She was in the middle of texting someone when "it popped up and said something about hold power button for 1 second then it just turned off". Now it will not turn on from power button or plugging in the power at all. If you pull the battery and put it back in, it flashes the LG splash screen up for a few seconds then shuts off. If I hold the volume button I can get to the factory reset screen but after the same amount of time, even if I hit power button to confirm, it shuts itself off.
Where do I go from here? She says she did not drop or impact it in any way and it doesn't appear to be so, nor does it have water damage.
imranh101 said:
So, I have an AT&T LG F6 here that my mom was using unlocked from AT&T to T-Mobile. She was in the middle of texting someone when "it popped up and said something about hold power button for 1 second then it just turned off". Now it will not turn on from power button or plugging in the power at all. If you pull the battery and put it back in, it flashes the LG splash screen up for a few seconds then shuts off. If I hold the volume button I can get to the factory reset screen but after the same amount of time, even if I hit power button to confirm, it shuts itself off.
Where do I go from here? She says she did not drop or impact it in any way and it doesn't appear to be so, nor does it have water damage.
Click to expand...
Click to collapse
Try charging it for a day or so
Left it on the charger for 12 hours straight and nothing.
[AT&T] V10 Screens won't power on but phone vibrates once when power button pushed
BONE STOCK ROM. One day my V10 screens were unresponsive. The mini screen was updating time correctly but wasn't responsive to touch, and the power button would not wake the main screen.
I removed the battery for 30 seconds then replaced, pressed power button. I had one short vibration then nothing. Neither screen comes alive. Removal of battery and replacement followed by pressing power button always gets a single vibration like it's powering up, but screen never comes alive.
Has this happened to anyone else? I am also wondering if in repair, someone could somehow access my data... I have sensitive information but the system is security locked with screen pattern.
Suleeto said:
BONE STOCK ROM. One day my V10 screens were unresponsive. The mini screen was updating time correctly but wasn't responsive to touch, and the power button would not wake the main screen.
I removed the battery for 30 seconds then replaced, pressed power button. I had one short vibration then nothing. Neither screen comes alive. Removal of battery and replacement followed by pressing power button always gets a single vibration like it's powering up, but screen never comes alive.
Has this happened to anyone else? I am also wondering if in repair, someone could somehow access my data... I have sensitive information but the system is security locked with screen pattern.
Click to expand...
Click to collapse
Sounds like your LCD and digitizer has went out need to get it replaced . No they can not access your phone all they will do is replace the LCD digitizer and power it on to see if it comes on once it does there job is done . Replacing or repairing repairing screen will not erase anything because all your info is saved on the motherboard