Hi,
I wanted to hard reset my OnePlus 8, as i do times to times to clean the phone (it's the first time on this one). But this time the simple manipulation that i did many times on my op5t, went bad... just after holding power and volume down key, it goes in fastboot mode (same that the picture) and it's written this :
PRODUCT_NAME - kona
VARIANT - SM8 UFS
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - (numbers and letters)
SECURE BOOT - yes
DEVICE STATE - locked
and the menu at the top scroll on its own between START/POWER OFF/SHOW BARCODE/RECOVERY MODE/RESTART BOOTLOADER, as if i was holding volume key.
When i hold volume donw or power key, it makes scroll stop but that's all. I try some things, as hold power button for a minute but it did nothing...
what can i do, except wait until the battery goes down to 0% ?
Thank you for you're help
Rehorur said:
Hi,
I wanted to hard reset my OnePlus 8, as i do times to times to clean the phone (it's the first time on this one). But this time the simple manipulation that i did many times on my op5t, went bad... just after holding power and volume down key, it goes in fastboot mode (same that the picture) and it's written this :
PRODUCT_NAME - kona
VARIANT - SM8 UFS
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - (numbers and letters)
SECURE BOOT - yes
DEVICE STATE - locked
and the menu at the top scroll on its own between START/POWER OFF/SHOW BARCODE/RECOVERY MODE/RESTART BOOTLOADER, as if i was holding volume key.
When i hold volume donw or power key, it makes scroll stop but that's all. I try some things, as hold power button for a minute but it did nothing...
what can i do, except wait until the battery goes down to 0% ?
Thank you for you're help
Click to expand...
Click to collapse
I found this
[OP8][OOS 21AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Or look and ask here around
OnePlus 8
The OnePlus 8 is a 6.55" phone with a 1080x2400p resolution display. The Qualcomm SM8250 Snapdragon 865 chipset is paired with 8/12GB of RAM and 128/256GB of storage. The main camera is 48+8+2MP and the selfie camera is 16MP. The battery has a 4300mAh capacity.
forum.xda-developers.com
Hey thx for reply. During the night i checked my op8 and it didn't auto scroll anymore. I selected start, press power and it worked... I don't know how.
I'll try again hard reset later and hope it'll work just fine this time
Rehorur said:
Hey thx for reply. During the night i checked my op8 and it didn't auto scroll anymore. I selected start, press power and it worked... I don't know how.
I'll try again hard reset later and hope it'll work just fine this time
Click to expand...
Click to collapse
Same happened to me today on my OP8 I tried everything but it was just scrolling and if I press down volume key it stops but can't select with power key... luckily after some 1 hr it stopped automatically and I was able to select with the power key...I'm currently on oos12...
Way 1. Restart Your Android Device
When a situation like the one you are in suddenly comes up, many users forget this basic yet very effective solution. Rebooting your Android device can actually really help you fix many minor issues on your phone. It can fix your phone that is stuck in Fastboot mode as well and there is no harm in giving it a try as it will not have any adverse effects.
Rebooting most phones is as easy as pressing and holding down the Power button. When your phone powers off, press and hold down the Power key again and your phone will turn on. You should now be out of Fastboot mode.
Regards,
J Wick
Hello,
My Nokia 9 pureview stucks in fastboot mode "androidOne screen" 3 days now, I've tried all the solution I've found on the net but nothing happens. I can't get to any recovery menu, I really appreciate your help to get out of this mode which I believe I entered accidentally.
No one seems to care !!!!!!
Bombino79 said:
No one seems to care !!!!!!
Click to expand...
Click to collapse
last night i got this problem , did u fix it ??
and how
Hi,
No, I couldn't fix it. I tried and I tried and nothing unfortunately.
Related
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
ChrisGrahamUK said:
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
Click to expand...
Click to collapse
I got this result too...only grey screen after ThL logo. Can't get into neither recovery mode nor dowlnload mode. Please help
It happened to me too, exactly the same steps and now it is the same thing: logo and after that a black screen. Please, any solution? My wife is gonna kill me (it is her phone):silly:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Thanks for your advice. I noticed the Chinese menu but I avoided it every time being afraid of not ruining something . Anyway, these days I've found out how to flash new ROMs so I am fooling around with trying different ROMs, I got allowance from my wife for this ). I am trying to fix an issue of the stock ROM, the proximity sensor doesn't light up the display when taking away from ear. The phone was not rooted so any attempt to enter engineering mode failed. Yesterday I discovered a MIUI ROM which looks very stylish and it solved the proximity sensor and even added the notification LED option (this was not included in the stock ROM). Now I have to test the battery life.
motanbigcat said:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Click to expand...
Click to collapse
I have the same problem with a black screen, the buttons do not work nothing happens Please help
THLW200S - Cyanogenmod 11
Hi, I solved all the issues of my THLW200S (lack of notification LED and improperly functioning of the proximity sensor) by flashing this ROM. I tried a few other ROM's but this one works flawlessly.
kasperski86 said:
I have the same problem with a black screen, the buttons do not work nothing happens Please help
Click to expand...
Click to collapse
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
fagh3r said:
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
Click to expand...
Click to collapse
Hi i had the same problem a grey screen no recovery mode and i fix it when flashing a new rom.
I use flash tools and i choose (format +download) tab.
I have this same problem, but i can't even get into the safe mode, the chinese one. it just boots up at the thl logo but still only dark grey screen. please help since i tried everything else
Dear Sir/Mdm,
This is Linn Myanmar and I am from Myanmar, Stayed in Singapore, working as an engineer.
I just bought my phone (Elephone S8) one week before and I tired rooting with tutorials from XDA forum (using flash tool, driver).
Yes, the phone has been rooted properly as root checker said and I tried installing Updated SuperSU from setting>About Phone>System Update>Local Updates>Updated SuperSU.zip.
After that the phone has rebooting with logo and never show any result and the phone just happened the screen on and off repeatedly until now.
So that please help me how to solve this and get back to its normal operation. I've tried long pressing on power button, long pressing on power button+volume up button, long pressing on power button+volume up button+volume down button quite many time, but those doesn't work and the phone hasn't come back it's normal operation.
Help me please.
With Best Regards,
Linn Myanmar
Linn Myanmar said:
Dear Sir/Mdm,
This is Linn Myanmar and I am from Myanmar, Stayed in Singapore, working as an engineer.
I just bought my phone (Elephone S8) one week before and I tired rooting with tutorials from XDA forum (using flash tool, driver).
Yes, the phone has been rooted properly as root checker said and I tried installing Updated SuperSU from setting>About Phone>System Update>Local Updates>Updated SuperSU.zip.
After that the phone has rebooting with logo and never show any result and the phone just happened the screen on and off repeatedly until now.
So that please help me how to solve this and get back to its normal operation. I've tried long pressing on power button, long pressing on power button+volume up button, long pressing on power button+volume up button+volume down button quite many time, but those doesn't work and the phone hasn't come back it's normal operation.
Help me please.
With Best Regards,
Linn Myanmar
Click to expand...
Click to collapse
Hi Linn
How did you solve your problem?
Hi have exactly the same problem at this moment and, as you, I tried everything (except the hammer but it was close...)
Really need a solution for this!
I like the phone but this way I have to buy another one and other brand for sure...
Thanks (from Portugal)
I suppose you both solved this, one war or other, but maybe someone else looks for a solution to this.
As the S8 is a MTK-phone, it's never really "dead" until it's defective. You can always revive it. So stay cool.
All you need is a Windows-PC with working VCOM-drivers, the SP-Flash-Tool and a ROM. You can get all that on www.elephone.hk/downloads (at least until today... if it's no longer there, you need to google for all that).
The problem is to shut the phone off.
Of course you can just let it boot-loop until the battery is empty, if you can take the time.
Otherwise there's no simple and foolproof way to shut it off if it's in loop.
Try everything you can imagine with the three buttons. Especially pressing the power-button for "ages". Try pressing any volume-button simultaneously, too. I had my S8 bricked to bootloop several times yesterday and today, while fiddling around with all ROMs I could find.
Sooner or later I got the phone to shut off. I somehow got it into the testing-menu, too, which is yellow and chinese and which won't help you.
I even somehow managed to boot into recovery several times, which offers "shutdown"-option. I have the impression that the S8 enters recovery eventually when it fails to boot often enough, but that's just a guess.
Anyway, once the phone is off, you have won.
Start the SP-Flash-Tool, load the scatter-file from your desired ROM (which is probably 20171018), unplug the phone, press "download", and then plug the phone to USB. You might have to press vol+ oder vol- while plugging it in, but if it's recognized, the SP Flash Tool will start flashing the ROM and your phone is up and running again.
Problem solved
I think this is too complex anyway.
The battery was empty after some days.
It was too bad lose so many information but I had to live with that.
So, finally the hammer solve the problem in less then a second...
Thank you very much. Is nice to know there are people helping to solve some problems.
Amorinix
Please also find all required files for rooting the Elephone S8 at:
https://www.mediafire.com/file/k1ldc..._root.rar/file
I hope this helps.
To turn phone off, hold all 3 buttons for about 15 seconds the phone will look like it's powering down but then restart after about 2 seconds just KEEP holding all 3 buttons and it will power off properly. In other words hold all 3 buttons for about 45 secs to power down if in a boot loop. Once powered down hold volume down whilst plugging into USB to flash.
Guys I need help ...this morning my phone restarted while charging and got stuck on huawei logo screen. i tried different combinations of Power + Volume up and down buttons but it didnt go to any other screen. then i installed hisuite on my PC and connected to my phone through USB cable, and holding volume down button i got to this screen which says FAST BOOT&RESCUE MODE and further reads "Phone Locked" "FRP Lock" in the end below Android logo.
i want to access my phone contents and get backup as I have important files to recover. Please I need some help with detailed step by step procedure to help me get through without damaging my phone or its content. I am hoping some nice techie can write me the steps needed to be taken considering I am a complete noob.
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Zep0th said:
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Click to expand...
Click to collapse
hi buddy,
i tried but no luck
Any news? I got one in the same condition. When its in eRecovery and i try to update it shows "can't get update info(or something like that)", it doesn't have factory reset button available, it doesn't have wipe button available. When I put it in fastboot, it shows Phone "Locked" and "FRP Lock".
Wtf do I do with this brick?
Thank you in advance! ( Be aware guys! I was scammed with it on the internet - full box, like new, and it doesn't even get into android)
Hi mate
Did you solve this in the end?
John Smith234 said:
Hi mate
Did you solve this in the end?
Click to expand...
Click to collapse
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
ahmowais said:
i want to access my phone contents and get backup as I have important files to recover.
Click to expand...
Click to collapse
Hi,
have you tried Emergency Backup?
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...
ahmowais said:
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
Click to expand...
Click to collapse
That sucks, I think I got exactly the same problem, have tried all kind of combinations. Only different appearing window is fastboot but that is totally useless as the device doesnt appear on Hisuite either. What happens when the batter totally drains ?
---------- Post added at 04:29 PM ---------- Previous post was at 04:26 PM ----------
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...[/QUOTE]
Phone does not turn off, and whatever button you press it just keeps showing Huawei start screen except for volume down and power button combination which opens fast boot window. Do you how to connect the device to laptop while in fastboot mode? We have tried fastboot commands on terminal but didnt get anywhere with file recovery...
so no solution?
U can do it, but u need dissasembly the phone, to make test point, if phone isn't hw damaged yes u can fix it in that way
hi may I ask if you have resolved the problem? Been experiencing the same problem when my huawei p20 lite got stuck on a startup logo screen
same problem with me, phone is stuck on start up logo, not moving anywhere despite using all the tricks, any solutions, anyone have?
Hi, I have same problem. Stuck on HUAWEI logo and power off do restart.
Phone is with last stock FW, FRP and BOOTL. locked. I tried update from SD card, but no succes. All buttons combinations not working except fastboot. But in fastboot, there is no possibility to do something due to locked btldr.
But I have one advantage, I have same phone model with same firmware working. Is there any possibility to recover bad piece?
*bump*
anyone who fixed this ?
Noticed quite a few threads re this, have had the prob myself.
Found a simple fix, while trying different things...
Hold ALL buttons down at once (vol dn + vol up + pwr button). Keep them held down for about a min or two. Phone will respond and you'll be able to shut it off. It takes a while to respond.
Cheers
Thank you!
I've added this to the US998 Pie KDZ thread. That KDZ is very wonky. It's the only Pie people have problems flashing. Probably because LG has not yet released Open Market US998 and the one we are using is technically for U.S. Cellular US998.
I had no trouble flashing it myself -- on my backup V30+(former LS998) going straight from Nougat (never updated, it was my backup phone) to Pie through Dev Patched LGUP Refurbish mode. But lots of other people seem to have problems.
On my daily phone, I'm still on rooted stock Oreo with Magisk and Xposed mods.
AsItLies said:
Noticed quite a few threads re this, have had the prob myself.
Found a simple fix, while trying different things...
Hold ALL buttons down at once (vol dn + vol up + pwr button). Keep them held down for about a min or two. Phone will respond and you'll be able to shut it off. It takes a while to respond.
Cheers
Click to expand...
Click to collapse
Hi, @AsItLies, I have tried but my phone still keeps bootloop, so could you please describe it more detailed? Can you enter fastboot or rec then? If possible, please come to see this: Help! bootloop per 5 sec, cannot enter rec, download or fastboot
zacox123 said:
Hi, @AsItLies, I have tried but my phone still keeps bootloop, so could you please describe it more detailed? Can you enter fastboot or rec then? If possible, please come to see this: Help! bootloop per 5 sec, cannot enter rec, download or fastboot
Click to expand...
Click to collapse
I think it's pretty clear, what I did and it worked in my situation(s):
There are 3 buttons right? Vol up, Vol dwn, and pwr.
Press all 3, at the same time, keep them pressed until the phone responds. It can take quite a while.
The last time I used this was after flashing LOS17, but then flashed a 19.x version of Magisk... (that's the wrong version of Magisk for Q Roms btw), resulting in phone stuck on boot logo, wouldn't budge.
I honestly have never tested exactly 'how long' it takes to respond, just that it does eventually respond and are then able to get to recovery etc. I can say time wise, if you hold them down and no response after a few minutes, then it's probably not going to work in your situation.
good luck
AsItLies said:
I think it's pretty clear, what I did and it worked in my situation(s):
There are 3 buttons right? Vol up, Vol dwn, and pwr.
Press all 3, at the same time, keep them pressed until the phone responds. It can take quite a while.
The last time I used this was after flashing LOS17, but then flashed a 19.x version of Magisk... (that's the wrong version of Magisk for Q Roms btw), resulting in phone stuck on boot logo, wouldn't budge.
I honestly have never tested exactly 'how long' it takes to respond, just that it does eventually respond and are then able to get to recovery etc. I can say time wise, if you hold them down and no response after a few minutes, then it's probably not going to work in your situation.
good luck
Click to expand...
Click to collapse
Oh, I'm just a little confused if you are talking about powering off/shutting down the phone entirely or instead changing the status of logo sticking and then shutting off with extra operation. My phone was suffering automatic reboot per 5 second, so I cannot recognize any other response than that. Thanks for your patience, but I just want to know something more to see if this method works when the phone is almost bricked. It seems you could enter rec or at least download mode, so maybe you had performed force reboot.
Hope further confirmation.
zacox123 said:
Oh, I'm just a little confused if you are talking about powering off/shutting down the phone entirely or instead changing the status of logo sticking and then shutting off with extra operation. My phone was suffering automatic reboot per 5 second, so I cannot recognize any other response than that. Thanks for your patience, but I just want to know something more to see if this method works when the phone is almost bricked. It seems you could enter rec or at least download mode, so maybe you had performed force reboot.
Hope further confirmation.
Click to expand...
Click to collapse
Hmmm I think you may be over thinking this a bit. All that happens (for me) is the phone responds (it gets out of the loop). Then, do whatever you want (shut down, recovery, etc etc).
I wouldn't suggest trying to reboot system again, as you already know that won't work...
All I can say is, if you tried the above and held the buttons, and nothing happened, then I don't know what else you can do. Sorry. Hopefully you can find a way.
Just in case someone is having problems entering download mode while in this bootloop, I'll explain how I applied AsltLies method:
First I held all buttons at the same time, no matter how many times the phone restarted, I still held them
After a while, a white screen with the MEID or IMEI info showed up, this is when the phone stopped bootlooping and I released the buttons.
Then, I CONNECTED the phone to the pc, after that I held VOL UP+POWER BUTTON, this would make the screen go black eventually, and when that happened, I inmediately released the power button but not the VOL UP button, and the phone entered into fully working download mode.
I hope this helps someone.
Dr_Roo said:
Just in case someone is having problems entering download mode while in this bootloop, I'll explain how I applied AsltLies method:
First I held all buttons at the same time, no matter how many times the phone restarted, I still held them
After a while, a white screen with the MEID or IMEI info showed up, this is when the phone stopped bootlooping and I released the buttons.
Then, I CONNECTED the phone to the pc, after that I held VOL UP+POWER BUTTON, this would make the screen go black eventually, and when that happened, I inmediately released the power button but not the VOL UP button, and the phone entered into fully working download mode.
I hope this helps someone.
Click to expand...
Click to collapse
Thanks. Added your notes to the Recovery Post in US998 Pie KDZ thread.
https://forum.xda-developers.com/showpost.php?p=81728547&postcount=641
dr_roo said:
just in case someone is having problems entering download mode while in this bootloop, i'll explain how i applied asltlies method:
First i held all buttons at the same time, no matter how many times the phone restarted, i still held them
after a while, a white screen with the meid or imei info showed up, this is when the phone stopped bootlooping and i released the buttons.
Then, i connected the phone to the pc, after that i held vol up+power button, this would make the screen go black eventually, and when that happened, i inmediately released the power button but not the vol up button, and the phone entered into fully working download mode.
I hope this helps someone.
Click to expand...
Click to collapse
thank you so much omg lifesafer
Hello,
I'm going on again on my WP15 which is on bootloop after trying to put an magisk patched rom to obtain root.
The objective now is just to put a official factory rom (which I downloaded from the official website for the right model)
The problem now is not how to do that but how I can connect the phone to the computer because :
Assuming that the phone is connected via usb-c to the computer on usb-a and the phone is on.
1 The screen is black
2 windows connect sound
2.1 Com port connected (device manager)
X wait 1s
3 windows disconnect sound
3.1 com port disconnected (device manager)
2&3 x2
4 Screen on : On screen :5G oukitel logo + android logo + Orange state; devive unlocked[...] not trusted[...]; device will boot on 5s
repeat 1 indefinitely
Please Note :
That I do not have ADB access since I switched from w10 to 11 so the rsa keys are not valid.
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
The phone is only off when out of battery, As soon as I connect a cable the phone turn on and I can do nothing except disconnect cable and wait (Can be very long with an 15000 mAh battery...)
There is absolutely no custom bootloader so no twrp or any custom recovery/installation bootloader.
With that... I think it's definitely bricked... I'm already thinking of soldering a new rom (or asking someone to do for me)
If you need more details or precisions tell me !
Thank you in advance !
Lunalunea said:
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
Click to expand...
Click to collapse
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
vxsw said:
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
Click to expand...
Click to collapse
Hello,
Sorry, I was not very active since this post and I abandoned for a very long time.
But ! Your instructions was good and I finally got my phone back to life !
Since then I realized that the Oukitel brand is very sketchy about theirs ROMs on the Oukitel website because the WP15 model is associated with the WP13 ROM on the download center so... WHY ? this is so confusing because now I have a WP15 advertised ROM (From a website... Yes... I know I was dumb to do that) and it's working yes... but this is very buggy for example the gyroscope is crazy or my MAC address is never the same even if I turn the built-in MAC address spoofing option off...
I will do some research just to get my phone as normal by doing it as clean as possible because I know now what is implying for doing that.
Thank you so much for your patience and especially for your guide and I apologize for my dumbness.
Lunalunea said:
the WP15 model is associated with the WP13 ROM on the download center
Click to expand...
Click to collapse
have no idea what are you talking about.
just checked in dl center on oukitel official site and seems all is ok. wp15 have it's own fw page and redirect to correct dl fw page, wp13 have it's own.
you can't mix up fw, in case wp13 signed exactly as wp13:
v318a-oq-s88-128g8g-bom2-hdp-r0-cts-eu_OUKITEL_WP13_EEA_V12_20210731_user_20210731.tar .gz
wp15 have no direct sign, but it have a cpu defenition:
TF919_OQ_S89_6833_R0_EEA_V1.9.7.2_S211014 .zip
i.e. mt6833 aka dimensity 700. wp 13 have a dimensity 800 aka mt6873
nb, in dl center, fw tool seems not works properly, so you must use a flashtool as I'd referred before.
I've tried everything, for 5 full days, then had no option left but to give up. Sorry.