Yes, Im stuck. Im on realme 5i and I flashed PixelExperience+ with TWRP, clean flash, made sure to wipe data and clear cache before and after flashing. I rebooted and boom, stuck on fastboot/bootloader. I can't go back to recovery mode or to system, it just takes me back to fastboot/bootloader. I backed up my files btw.
Supposed fixes that did not work:
1: Fastboot erase boot && fastboot erase dtbo && fastboot erase recovery && fastboot erase vbmeta && fastboot erase system && fastboot erase userdata and fastboot flash recovery TWRP.img && fastboot flash dtbo dtbo.img && fastboot flash vbmeta vbmeta.img && fastboot reboot-bootloader.
- it brings me back to fastboot when I try to go to recovery mode.
2: Push volume down/up and power button.
- it brings me back to fastboot when I try to go to recovery mode. (2)
3: flash stock recovery (I can't go to recovery so I cant flash stock ROM too)
- it brings me back to fastboot when I try to go to recovery mode. (3)
What else do I do? Am I missing something from the fixes I've tried above?? I am in need of urgent help.
Update: I've tried realme flash tool, for stock ROM and it says cannot find central directory.
I've tried putting the ofp to AppData/Roaming/flashtool/temp as said from another thread. I've also tried running in administrator but none work. I've ran out of luck today, please help.
Phone: Realme 5i
Story: I had my phone get a custom recovery, TWRP. Got it rooted. Before I rooted it I rolledback to android 9, ColorOS, bw. Then decided why not use a custom ROM? So I did. PixelExperiencePlusEdition ANDROID 12. I flashed it with TWRP, factory reset and cleared cache, in other words, clean flash. I'm hopeless cause once I rebooted, I got sent to fastboot then when I tried to go to recovery mode, it sends me back to fastboot! What do I do? I need help. please.
Update: So maybe I am doing the 1st method wrong. I got all the img files wrong, cause I need them from my stock firmware right? So I tried programs to extract those img from their new.dat.br files right? I did and the extractors keep giving me something is missing, line this and that is incorrect or something like that. I'm really hopeless. Can someone give me the img files of RMX2030EX_11_OTA_0210_all_1hZhuZlgVC1t? system.img, boot.img, vendor.img, vbmeta.img, dtbo.img? What else am I missing to manually flash it?
I am facing the same issue as well, I had downloaded the RMX2030EX_11_C.75_210917_1b9832bb file and extracted using https://github.com/bkerler/oppo_decrypt but the first method still didn't work. was is the wrong file? or did the decryptor didn't work properly idk.
koarc lkas said:
Update: So maybe I am doing the 1st method wrong. I got all the img files wrong, cause I need them from my stock firmware right? So I tried programs to extract those img from their new.dat.br files right? I did and the extractors keep giving me something is missing, line this and that is incorrect or something like that. I'm really hopeless. Can someone give me the img files of RMX2030EX_11_OTA_0210_all_1hZhuZlgVC1t? system.img, boot.img, vendor.img, vbmeta.img, dtbo.img? What else am I missing to manually flash it?
Click to expand...
Click to collapse
I can't find a file on realme software page with this name where did you get the file? plus does your variant has Qualcomm or Mediatek CPU? I saw a video where it stated that this phone has two variants one with Qualcomm and other with Mediatek(Helio) CPU.
Edit: Do an MD5 check maybe your file got corrupt..
I managed to fix, you will need download these files from telegram. one of them should work for me the ColorOS file worked. Follow the instruction given in the readme file and that should do. I am installing DotOS now it showing the splash animation from last 5 minutes, if it works i'll update the comment or will provide further instructions to fix.
FastbootFix-Realme-5-5i-5s~RUI.zip
FastbootFix-Realme-5i~Color OS.zip
Edit: the reason it was taking so long to bootup and was stuck on splash animation is that I forgot to format (type yes).
yasir.r said:
I can't find a file on realme software page with this name where did you get the file? plus does your variant has Qualcomm or Mediatek CPU? I saw a video where it stated that this phone has two variants one with Qualcomm and other with Mediatek(Helio) CPU.
Edit: Do an MD5 check maybe your file got corrupt..
Click to expand...
Click to collapse
I got it from this:
This is what I used to rollback to android 9 cause another video said I had to do this first before rooting. It worked though then custom ROM happened and now phone's bricked. Hasn't been used ever since.
I'll do MD5 if your fix didn't work.
Hey um, Im a turtle and Im reading the .txt from the link you gave the color os one specifically. So Im at the step where I have to Double Click "Open This to Proceed" file to start the process. What is this "Open This to Proceed" exactly?
Edit: Never mind. I should've looked more before asking..
IT WORKED!!!!!!! THANK YOU SO MUCH! YOU'RE A LIFESAVER!
koarc lkas said:
IT WORKED!!!!!!! THANK YOU SO MUCH! YOU'RE A LIFESAVER!
Click to expand...
Click to collapse
Now if you want to flash the stock rom you will have to flash firmware first.
flash fw c.xx
wipe 5
flash rom
flash vbmeta disabler
format (type yes)
reboot
You can download the firmware file form here. https://github.com/realme-trinket-organization/firmware_files_RMX1911/releases and the vbmeta disabler from here. https://t.me/r5notes/52
yasir.r said:
Now if you want to flash the stock rom you will have to flash firmware first.
flash fw c.xx
wipe 5
flash rom
flash vbmeta disabler
format (type yes)
reboot
You can download the firmware file form here. https://github.com/realme-trinket-organization/firmware_files_RMX1911/releases and the vbmeta disabler from here. https://t.me/r5notes/52
Click to expand...
Click to collapse
!!! Im having a problem with flashing my stock rom cause it keeps getting bricked. Thank you so much for giving me this!
yasir.r said:
Now if you want to flash the stock rom you will have to flash firmware first.
flash fw c.xx
wipe 5
flash rom
flash vbmeta disabler
format (type yes)
reboot
You can download the firmware file form here. https://github.com/realme-trinket-organization/firmware_files_RMX1911/releases and the vbmeta disabler from here. https://t.me/r5notes/52
Click to expand...
Click to collapse
How do I know my exact build number? I just know that it's realme 5i and it is RMX2030, not those C69 thingies.
koarc lkas said:
How do I know my exact build number? I just know that it's realme 5i and it is RMX2030, not those C69 thingies.
Click to expand...
Click to collapse
I just used the latest version c.73 it worked. I do have to same phone. R5i, RMX2030 with SD665 CPU.
How do I flash the firmware I downloaded from your link? and the vbmeta disabler img is in the firmware-update file, correct?
koarc lkas said:
How do I flash the firmware I downloaded from your link? and the vbmeta disabler img is in the firmware-update file, correct?
Click to expand...
Click to collapse
no no not the image, vbmeta-disabler.zip from here https://t.me/r5notes/52 and flash them in pbrp like you flash the rom.
ohh both zip files, okay
yasir.r said:
no no not the image, vbmeta-disabler.zip from here https://t.me/r5notes/52 and flash them in pbrp like you flash the rom.
Click to expand...
Click to collapse
Upon flashing the firmware zip, my phone keeps getting stuck on bootloop, it doesnt even let me go to recovery mode. It keeps restarting too?
Edit: is this normal??
The tool you gave me to fix fastboot doesnt work anymore :<
koarc lkas said:
Upon flashing the firmware zip, my phone keeps getting stuck on bootloop, it doesnt even let me go to recovery mode. It keeps restarting too?
Edit: is this normal??
Click to expand...
Click to collapse
did you follow the process, properly?? don't tell you flashed just the firmware and nothing else..
yasir.r said:
did you follow the process, properly?? don't tell you flashed just the firmware and nothing else..
Click to expand...
Click to collapse
I only got to step one which you said to get firmware and flash it. I flashed it and my phone rebooted but it keeps restarting. I can still flash images but I cant seem to fix this "reboot loop" and the tool you gave doesnt fix it either. What Im guessing is C73 isnt my firmware version since this phone is years old? Do you know how to delete the firmware so maybe the tool you gave me would work again and I can start over once more?
Edit: Im once again stuck in fastboot btw.
Edit: I fixed the rebooting loop with the stock recovery.bat from the file you gave me but when I do the "open this to proceed" it goes back to rebooting automatically. I still want to remove the C73 firmware though.
Related
Problem already solved. Thanks!
Hi everyone, this is Sarry. I got my new huawei mate 9 pro on Wednesday this week, the version is LON-L29C636, I was trying to flash a custom ROM into the phone, but unfortunately I was too careless, flashed a different version ROM into it and cause immediate start up loop. As I finally boot into fastboot and twrp rec mode, I noticed that the computer won't recognize the USB portal of the device. So I went in eRecovery mode and tried to download an updated version but it failed to find any useful version.
Since mate 9 pro doesn't support SD card, I brought a USB-OTG cable and also usb type-c microSD adapter, when I connected the sd card to the phone, twrp reads the information, but when I tried to flash the update.zip file, it failed. I tried to copy the dload folder with update.app by twrp into phone storage, even if I got successful, the file just disappeared when i refresh the page. So now I don't have any idea on how to unbrick the phone, felt really bad.
Feel free to ask me any question or information needed, I really hope to unbrick the phone, I've been using huawei cellphone for more then 2 years and love it very much. Thanks for the help!!
Hello,
well the situation isn't that hard actually, you may just get the stock image and flash it from fastboot then start the custom rom installation from scratch.
what is the error number or statement?
EDIT: you will need huawei update extractor to pull out the img files and flash them through fastboot
Another Edit:
in the file path choose the update.app
you will need the following partitions:
Boot
System
Recovery
^select these then right click and press `extract selected` and flash them using the following commands:
1- fastboot devices > to check the device
2- fastboot flash boot boot.img
3- fastboot flash recovery recovery.img
4- fastboot flash system system.img
hope this helps you
good luck!
TheShadowMC said:
Hello,
well the situation isn't that hard actually, you may just get the stock image and flash it from fastboot then start the custom rom installation from scratch.
what is the error number or statement?
EDIT: you will need huawei update extractor to pull out the img files and flash them through fastboot
Another Edit:
in the file path choose the update.app
you will need the following partitions:
Boot
System
Recovery
^select these then right click and press `extract selected` and flash them using the following commands:
1- fastboot devices > to check the device
2- fastboot flash boot boot.img
3- fastboot flash recovery recovery.img
4- fastboot flash system system.img
hope this helps you
good luck!
Click to expand...
Click to collapse
Thank you so much for the help! The fastboot script isn't really working because when I tried to run it in cmd, it shows 'error can't find device', so I tried to flash the img files with twrp, the boot.img and recovery.img works well, but the system.img cannot be flashed, and the error message shows 'E:\cannot flash system.img'. I also tried to download the full version firmware and created dload folder in my SD card, copied UPDATE.APP into the folder, tried the 3 button force update, still nothing worked. Now the seller send me an Email said I can return the product, they are going to charge me for some ROM re installation fee.
However what error does it give during flashing system.IMG I would like to know, also as well as twrp custom ROM flashing?
Aquarius_2333 said:
Thank you so much for the help! The fastboot script isn't really working because when I tried to run it in cmd, it shows 'error can't find device', so I tried to flash the img files with twrp, the boot.img and recovery.img works well, but the system.img cannot be flashed, and the error message shows 'E:\cannot flash system.img'. I also tried to download the full version firmware and created dload folder in my SD card, copied UPDATE.APP into the folder, tried the 3 button force update, still nothing worked. Now the seller send me an Email said I can return the product, they are going to charge me for some ROM re installation fee.
Click to expand...
Click to collapse
well brother about the driver issue, sorry about being late, you must have downloaded the fastboot drivers and installed them.
Hi there
I think my phone is briked. I wantet to downgrade my phone to the 108 version becaus there was android auto working.
So i tried to flash the System.img from the 108 Software. I tried 2 different:
http://pro-teammt.ru/firmware-database/?firmware_model=ANE-lx1&firmware_page=0
and the Middle east from the thread here.
Id did flash over fastboot, but after every start the Build number was still on the 112 Firmware.
So i tried the Trebel ASOP, RR and LOS. ASOP Booted but had only forceclose on every service. RR and LOS did not work.
Then i tried to flash the ramdisk, recovery, vendor kernel etc from the update.app from the 108 Firmware. No my phone is briked.
I tried to flash eveyrthing from the .112 updateapp from the Official thread but nothing happend.
Then i tried to flash every possible .img file from the .112 app but most of them gave "Error Command not allowed"
So here i Am. Bootlooping phone and i dont know what else to do.
Since the beginning i could flash every system.img but it still was on the 112 Build and suddenly it bricked. I cant get to the 112 Version back with flashing system.img because it bootloops. Same for Treble and the newest 126 Version or the old 108 Build.
The only thing booting is ASOP Treble but i cant navigate coz of the 1000 of forceclosed errors.
I formated the userpartition as i was asked from Huawei, and bevore i did those installations i did a fullwipe with EMUI.
The Recovery cant connect to the server, and yeah.. i dont know what to do next. ofc i have unlocked bootloader. I bought the Phone in Switzerland with Dual Sim. ANE-LX1.
Does anyone have another idea?
Cheers
EDIT:
After 10000 billions klicks i managed to get through the treble wizzard, even when the com.android.phone has stopped is comming every second.
At the Moment im in the About Phone Screen and i see this: (I am in the newest ASOP Treble SU with gapps)
Model: ANE-LX1
Android Version 8.1
Baseband: unknown
Kernel Version 4.4.23+ (gcc version 4.9x 20150123 (prerelease) (GCC))
Fri Mar 9 09:51:47 CST 2018
Build Number ANE-LX1 8.0.0.112(c432) <------- WTF ?!?
I hope this informations is something to work with.
SIM CARD is not readable.
Edit2:
I connected it to HI SUit. It says my device running properly on the .112 Version (WTF i got Treble installed)
I cant connect anything. How the hell can i get rid of this ****ing wong Build number??
Same for Checking Updates. .112 should be newest (its not its 126) Any ideas?
Edit3:
Can only Flash with fastboot. Twrp cant mount the partitions. Trying to installing the zip or adb sideload gives me an error code or command not allowed :\
i think the best way is
download a FULL-Update for your build
https://forum.xda-developers.com/9-lite/help/huawei-honor-firmware-download-t3790327
read this https://forum.xda-developers.com/hon...flash-t3778085
if you understand and have the know how : good luck
with this way i have my Ho9L reflash to stock-rom
you have to know what you're doing
use Magisk (search inside xda the thread)
this work by me better as SuperSU (with less problem's)
use this twrp, it's work WITH encryption
ttps://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
if you understand what i am write - you can reset your phone to "delivered-state" and beginning by zero (initial-setting's) and
what ever you flash - you have a chance to reset your phone
first look on bootloader-screen if
- bootloader unlocked
- FRP unlock
THIS is essential !
last tip: let the fingers from custom-rom if this not expressly build for OREO
OREO is other as NOUGAT ! very different !
Relock your bootloader before trying an Erecovery...
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
heindrix said:
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
Click to expand...
Click to collapse
I'm getting this error when I'm trying to extract UPdate.app of anE-LX1 8.0.0.108(C185)
https://ibb.co/k0HmGy
haidermiz said:
I'm getting this error when I'm trying to extract UPdate.app of anE-LX1 8.0.0.108(C185)
https://ibb.co/k0HmGy
Click to expand...
Click to collapse
go to settings, untick all options that have "verify" in it, and try extract again.
heindrix said:
go to settings, untick all options that have "verify" in it, and try extract again.
Click to expand...
Click to collapse
thanks it worked
heindrix said:
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
Click to expand...
Click to collapse
When i did fastboot flash vendor vendor.img it says
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460706 KB)...
OKAY [ 18.084s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
haidermiz said:
When i did fastboot flash vendor vendor.img it says
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460706 KB)...
OKAY [ 18.084s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
Click to expand...
Click to collapse
Hi there, if you have TWRP, you could flash system and vendor using TWRP. boot into TWRP, choose install, choose use image file, and flash system.img to system, and vendor.img to vendor.
heindrix said:
Hi there, if you have TWRP, you could flash system and vendor using TWRP. boot into TWRP, choose install, choose use image file, and flash system.img to system, and vendor.img to vendor.
Click to expand...
Click to collapse
Tried then phone was stuck at installing update 5% after 5 mins there was a screen android written on it then again it booted to erecovery i factory reset data, wiped cache then again it rebooted and it's finally open now thanks
heindrix said:
Hi there, if you have TWRP, you could flash system and vendor using TWRP. boot into TWRP, choose install, choose use image file, and flash system.img to system, and vendor.img to vendor.
Click to expand...
Click to collapse
I did that a installed stock rom after that I tired to reset data it said failed, it failed at 20% then I WIPED CHAHE and now when It opened I sign in and downloaded snapchat but it's noy opening and in settings about phone there's no model number mentioned it says unknown I don't know what to do
haidermiz said:
I did that a installed stock rom after that I tired to reset data it said failed, it failed at 20% then I WIPED CHAHE and now when It opened I sign in and downloaded snapchat but it's noy opening and in settings about phone there's no model number mentioned it says unknown I don't know what to do
Click to expand...
Click to collapse
if you could, please provide screenshot so i can see it more clearly.
after you flashing the rom, one thing you must do is to format the data and cache through emui erecovery, as long as you're not format the data and cache successfully, the rom will not works properly.
for another reference, please refer to my other post here : https://forum.xda-developers.com/ma...0-pro-help-t3776050/post76916307#post76916307
heindrix said:
if you could, please provide screenshot so i can see it more clearly.
after you flashing the rom, one thing you must do is to format the data and cache through emui erecovery, as long as you're not format the data and cache successfully, the rom will not works properly.
for another reference, please refer to my other post here : https://forum.xda-developers.com/ma...0-pro-help-t3776050/post76916307#post76916307
Click to expand...
Click to collapse
Greetings, I downloaded the rom of my Huawei p20 EML-L09 and it has two Update.app
How and in what order should I install them?
Udpate.app that weighs 4.62gb and
update_EML-L09_hw_la.app which weighs 1.5gb
Thanks a lot.
ajbn7 said:
Greetings, I downloaded the rom of my Huawei p20 EML-L09 and it has two Update.app
How and in what order should I install them?
Udpate.app that weighs 4.62gb and
update_EML-L09_hw_la.app which weighs 1.5gb
Thanks a lot.
Click to expand...
Click to collapse
Hi,
this guide is two years old, if you want to recover your phone, download Service ROM from androidhost.ru website, and flash it using dload method .
Which EMUI version are you running? Your region is C605 ?
-Alf- said:
Hi,
this guide is two years old, if you want to recover your phone, download Service ROM from androidhost.ru website, and flash it using dload method .
Which EMUI version are you running? Your region is C605 ?
Click to expand...
Click to collapse
Correct, my region is 605. I already downloaded the latest version available for download on that page which is 8.1.
Before my phone went into brick, it had version 9.1
And bring those two update.app
ajbn7 said:
Before my phone went into brick, it had version 9.1
Click to expand...
Click to collapse
For 9.1 you can download
https://androidhost.ru/2bCG
Unpack .zip archive , find dload file and simply transfer it to the SD card, without unpacking it! (instructions can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo.
Note: Service ROM L-29 contains both version - L-29 & L-09 .
-Alf- said:
For 9.1 you can download
https://androidhost.ru/2bCG
Unpack .zip archive , find dload file and simply transfer it to the SD card, without unpacking it! (instructions can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo.
Note: Service ROM L-29 contains both version - L-29 & L-09 .
Click to expand...
Click to collapse
I struggled so hard to download the file, and to my surprise it does not include the software version for the L-09, only for the L-29
Are there any risks if I try to install version 8.1?
Another thing, the Huawei p20 does not have a micro sd slot, I guess I should do it through a USB OTG?
ajbn7 said:
I struggled so hard to download the file, and to my surprise it does not include the software version for the L-09, only for the L-29
Click to expand...
Click to collapse
Are you sure?
I'm really sorry, but most of the packages are universal.
ajbn7 said:
Are there any risks if I try to install version 8.1?
Click to expand...
Click to collapse
It may brick your phone definitively.
ajbn7 said:
Another thing, the Huawei p20 does not have a micro sd slot, I guess I should do it through a USB OTG?
Click to expand...
Click to collapse
Yes, you can.
ajbn7 said:
I struggled so hard to download the file, and to my surprise it does not include the software version for the L-09, only for the L-29
Are there any risks if I try to install version 8.1?
Another thing, the Huawei p20 does not have a micro sd slot, I guess I should do it through a USB OTG?
Click to expand...
Click to collapse
Okay, I definitely don't get the 9.1 for Eml-09 for free.
So last query (I hope), what is less risky, install Rom 8.1 which is for my region and exact model, or install Rom 9.1 with my region but for model L-29 or install a Rom 9.1 for my model but with a different region?
Thank you for your support.
ajbn7 said:
what is less risky?
Click to expand...
Click to collapse
L29 EMUI 9.1 C605. Even if it succeeds the phone will not work correctly.
Most probably you will get the wrong model or in build number "system_0.46 (xxxx)" . HiSuite will not recognize your device (and no OTA update).
Hello
I just rooted my honor view 10 BKL-L09, I tested the rom CosmicOs but it does not suit me. How to return to the original rom? I tried to put the UPDATE.app file in a directory "dload" but I get a failed error, I tried to extract the files but I do not understand what I have to do.
Do you have a detailed procedure for walking on to hand over the official rom?
Thank you
Extract system, recovery_ramdisk and ramdisk. Boot to bootloader flash recovery and ramdisk.
Boot to recovery do full wipe.
Reboot to bootloader flash system. Reboot and enjoy.
Powered by View 10
2WildFirE said:
Extract system, recovery_ramdisk and ramdisk. Boot to bootloader flash recovery and ramdisk.
Boot to recovery do full wipe.
Reboot to bootloader flash system. Reboot and enjoy.
Powered by View 10
Click to expand...
Click to collapse
hi, I unlocked my honor v10 and installed the recovery twrp and for mistake I did the wipe of all (system, intenal memory and storage), now my device enter in loop because doesn't find the operative system, only can enter in the recovery. what to do? I tried to download the original firmware from the official site but I had no success
2WildFirE said:
Extract system, recovery_ramdisk and ramdisk. Boot to bootloader flash recovery and ramdisk.
Boot to recovery do full wipe.
Reboot to bootloader flash system. Reboot and enjoy.
Powered by View 10
Click to expand...
Click to collapse
Thx, how I can boot in recovery mode after flash recovery_ramdisk, I push Up + power ?
2WildFirE said:
Extract system, recovery_ramdisk and ramdisk. Boot to bootloader flash recovery and ramdisk.
Boot to recovery do full wipe.
Reboot to bootloader flash system. Reboot and enjoy.
Powered by View 10
Click to expand...
Click to collapse
I extracted the highlighted items, is that it?
https://image.noelshack.com/fichiers/2018/21/7/1527420105-capture-update.png
That's what I did but it does not work :
1) fastboot flash ramdisk RAMDISK.img
2) fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
3) recovery boot => wipe all data, cache, ...
4) reboot in fastboot mode
5) flashboot flash system SYSTEM.img
Now my phone restarts in a loop.
Do not wipe from twrp
thecrazyspy said:
I extracted the highlighted items, is that it?
https://image.noelshack.com/fichiers/2018/21/7/1527420105-capture-update.png
That's what I did but it does not work :
1) fastboot flash ramdisk RAMDISK.img
2) fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
3) recovery boot => wipe all data, cache, ...
4) reboot in fastboot mode
5) flashboot flash system SYSTEM.img
Now my phone restarts in a loop.
Click to expand...
Click to collapse
first, check this
I Want you to try this go to twrp>mount system and check if system partition have files and it is intact, if not you need to flash whole rom again or a new RoM (asop or anything to boot it)
next, open fastboot mode and flash this
https://forum.xda-developers.com/honor-view-10/how-to/stock-recovery-getting-to-stock-t3754797
this is a stock recovery steps are given about how to install it , once you are on stock recovery,
open recovery clear cache and perform factory wipe once done it should boot if system partition is intact
NEVER PERFORM WIPE FROM TWRP, it seems buggy screwed my device too
(--light--) said:
first, check this
I Want you to try this go to twrp>mount system and check if system partition have files and it is intact, if not you need to flash whole rom again or a new RoM (asop or anything to boot it)
next, open fastboot mode and flash this
https://forum.xda-developers.com/honor-view-10/how-to/stock-recovery-getting-to-stock-t3754797
this is a stock recovery steps are given about how to install it , once you are on stock recovery,
open recovery clear cache and perform factory wipe once done it should boot if system partition is intact
NEVER PERFORM WIPE FROM TWRP, it seems buggy screwed my device too
Click to expand...
Click to collapse
I finally succeeded, I think that I did not have the right file UPDATE.app, for those that it interests here is the link to have the rom stock of a BKL-L09 European version
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2201/g1642/v128115/f1/full/update.zip
I use this soft to find it : Firmware Finder by Team MT
I think I loose IA on my phone, if I take flower picture I haven't logo flower. When I download Update file, I van download 2 others file, hou know how I can install this ?
thecrazyspy said:
I finally succeeded, I think that I did not have the right file UPDATE.app, for those that it interests here is the link to have the rom stock of a BKL-L09 European version
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2201/g1642/v128115/f1/full/update.zip
I use this soft to find it : Firmware Finder by Team MT
Click to expand...
Click to collapse
Is this the last one? I tried with the last BKLL09C432B160b (22 may)... look like the european but gave me a mistake at 5% ... so is it wrong? Should have I download from your link?
xmaxo said:
Is this the last one? I tried with the last BKLL09C432B160b (22 may)... look like the european but gave me a mistake at 5% ... so is it wrong? Should have I download from your link?
Click to expand...
Click to collapse
This is the latest version for the European version of the Honor view 10, you can try with that one.
thecrazyspy said:
I think I loose IA on my phone, if I take flower picture I haven't logo flower. When I download Update file, I van download 2 others file, hou know how I can install this ?
Click to expand...
Click to collapse
Is not enough the update file to return to the stock rom?
2WildFirE said:
Extract system, recovery_ramdisk and ramdisk. Boot to bootloader flash recovery and ramdisk.
Boot to recovery do full wipe.
Reboot to bootloader flash system. Reboot and enjoy.
Powered by View 10
Click to expand...
Click to collapse
Hi i have a big problem. I have download the last bkl EU rom, 160 build, i flashed 3 files but the device get bootloop and i don't know what i can do.
Anyway when i buy the device i had 141 build, then i unlocked and try trwp with carbon.
For to return to stock i flashed the 3 files from 160 build. Maybe i have to take 3 files from 141 build? Because i had this build how base rom?
You flashed the 3 download files from hwff? Then u have to flash the No check recovery before.
Powered by View 10
2WildFirE said:
You flashed the 3 download files from hwff? Then u have to flash the No check recovery before.
Powered by View 10
Click to expand...
Click to collapse
I downladed from firmware finder in my PC, then i extracted system.IMG, ramdisk.IMG, recover_ramdisk.img, cust.IMG, then flash in fastboot.
Also i tried e-recovery after change dns, but after download i get "recovery failed"
Take a look at here im sure this solves your problem
https://r.tapatalk.com/shareLink?ur...share_tid=3778085&share_fid=3793&share_type=t
Powered by View 10
2WildFirE said:
Take a look at here im sure this solves your problem
https://r.tapatalk.com/shareLink?ur...share_tid=3778085&share_fid=3793&share_type=t
Powered by View 10
Click to expand...
Click to collapse
I have l09 version, works anyway?
And if i'm in bootloop now, how can i flash 3 zip files?
xmaxo said:
Is not enough the update file to return to the stock rom?
Click to expand...
Click to collapse
Finally it's good, I dreamed, lool
thecrazyspy said:
This is the latest version for the European version of the Honor view 10, you can try with that one.
Click to expand...
Click to collapse
I downloaded it but gave me the same error at 5% of process. I bought the device in amazon Italy so the european stock rom must work.
Any idea?
I followed the suggestion to flash the stock recovery but now I've no access to the system and not to the bootloader. With twrp at least I could go in fastboot mode. Now I can flash nothing and the device goes in loop without system. And factory reset gives an error at 10-12%
xmaxo said:
I downloaded it but gave me the same error at 5% of process. I bought the device in amazon Italy so the european stock rom must work.
Any idea?
I followed the suggestion to flash the stock recovery but now I've no access to the system and not to the bootloader. With twrp at least I could go in fastboot mode. Now I can flash nothing and the device goes in loop without system. And factory reset gives an error at 10-12%
Click to expand...
Click to collapse
you followed the following steps:
1) fastboot flash ramdisk RAMDISK.img
2) fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img or with this https://forum.xda-developers.com/honor-view-10/how-to/stock-recovery-getting-to-stock-t3754797
3) recovery boot => wipe all data, cache, ...
4) reboot in fastboot mode
5) flashboot flash system SYSTEM.img
As you check the file you download is compatible with your phone with the following software:
http://pro-teammt.ru/huawei-firmware-finder/
thecrazyspy said:
you followed the following steps:
1) fastboot flash ramdisk RAMDISK.img
2) fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img or with this https://forum.xda-developers.com/honor-view-10/how-to/stock-recovery-getting-to-stock-t3754797
3) recovery boot => wipe all data, cache, ...
4) reboot in fastboot mode
5) flashboot flash system SYSTEM.img
As you check the file you download is compatible with your phone with the following software:
http://pro-teammt.ru/huawei-firmware-finder/
Click to expand...
Click to collapse
Ok now I had success in enter in fastboot.
The stock file is the same you posted (22th may).
This one doesn't work with the dload power+up+down.
So I want to extract the 3 files, I put in profile "unknown" (or other) but when I select the folder of update.app returns this error: ERECOVERY_VBMET.img: Invalid header crc -Expected: 14228 Got: 54798
Ok I disabled the check of headers to solve that problem
I installed EMUI 9 on my p20 lite and didn't like it, so I tried one of the openkirin 9.0 beta roms. There was some features that didn't work so I decided I wanted to go back. I followed the guide on openkirin's website about going back to stock by flashing system.img, ramdisk.img, kernel.img and recovery_ramdisk.img however trying to flash ramdisk.img gives "partition length get error". Now, the phone only is able to boot into fastboot and eRecovery mode. In eRecovery the options to backup and to factory reset are grayed out however, and the "update to latest version" doesn't work. When I plug the charger in from being turned off it shows the white error screen with error 10 (boot image) and error 2 (load failed). I have a suspicion that flashing kernel.img is what causing the problem, but I don't really know enough to be sure and I don't want to do anything to make it worse since it seems like this should be fixable.
This is the only phone I have which properly worked so any help is greatly appreciated.
Hi there
Don't worry, it's fixable
There's way bigger mess than that, so the best solution for you and the easiest one is to flash a signed dload package, which you can find for your model and build number in this website:
https://androidhost.ru/search.html
Search in this format "ANE-LX1C66".
Then extract it and copy the "dload" folder to the root of your sd card.
Then power off your device if it isn't and then press POWER + Volume Plus + Volume Minus at the same time until a circle with EMUI appears.
That will erase all data and lock your bootloader.
Cheers!
AS
ars_chelsea said:
Hi there
Don't worry, it's fixable
There's way bigger mess than that, so the best solution for you and the easiest one is to flash a signed dload package, which you can find for your model and build number in this website:
https://androidhost.ru/search.html
Search in this format "ANE-LX1C66".
Then extract it and copy the "dload" folder to the root of your sd card.
Then power off your device if it isn't and then press POWER + Volume Plus + Volume Minus at the same time until a circle with EMUI appears.
That will erase all data and lock your bootloader.
Cheers!
AS
Click to expand...
Click to collapse
Ah, yeah, forgot to mention I already tried that. Unfortunately it doesn't work. It just says "software install failed". I'm genuinely about to throw this f***ing thing into orbit
Thanks for your help though.
Afifus said:
Ah, yeah, forgot to mention I already tried that. Unfortunately it doesn't work. It just says "software install failed". I'm genuinely about to throw this f***ing thing into orbit
Thanks for your help though.
Click to expand...
Click to collapse
That's weird, are you sure you are installing the right package for your device? It's rare to fail with a correct package.
What's your build number and model ?
ars_chelsea said:
That's weird, are you sure you are installing the right package for your device? It's rare to fail with a correct package.
What's your build number and model ?
Click to expand...
Click to collapse
Tried Oreo build 150 for ane-lx1c432 and ane-lx1c782 since those are the only models my phone could be.
Although, when I do the get-build-number command in fastboot it still says I'm on a Pie build. I'm gonna try doing a Pie build and I'll get back to you.
ars_chelsea said:
That's weird, are you sure you are installing the right package for your device? It's rare to fail with a correct package.
What's your build number and model ?
Click to expand...
Click to collapse
Yeah, pie didn't work either.
Afifus said:
Yeah, pie didn't work either.
Click to expand...
Click to collapse
But there is no signed package for those models yet, what dload files did you use?
Cheers,
AS
ars_chelsea said:
But there is no signed package for those models yet, what dload files did you use?
Cheers,
AS
Click to expand...
Click to collapse
I got it off of firmware finder. Are those not signed?
Afifus said:
I got it off of firmware finder. Are those not signed?
Click to expand...
Click to collapse
No, those are not signed, you need the dload files from Androidhost.ru since it's the only place you can get them for free, here's a link for both the versions you showed:
Single SIM ANE-LX1C432: https://androidhost.ru/Utm
Dual SIM ANE-LX1C432: https://androidhost.ru/Utn
Single SIM ANE-LX1C782: https://androidhost.ru/29Zn
Dual SIM ANE-LX1C782: https://androidhost.ru/1jzD
Choose the right one, and follow the procedure I sent you in a reply above.
ars_chelsea said:
No, those are not signed, you need the dload files from Androidhost.ru since it's the only place you can get them for free, here's a link for both the versions you showed:
Single SIM ANE-LX1C432: https://androidhost.ru/Utm
Dual SIM ANE-LX1C432: https://androidhost.ru/Utn
Single SIM ANE-LX1C782: https://androidhost.ru/29Zn
Dual SIM ANE-LX1C782: https://androidhost.ru/1jzD
Choose the right one, and follow the procedure I sent you in a reply above.
Click to expand...
Click to collapse
Cheers, but unfortunately neither of those worked. I'm at a loss on what else I could try.
Afifus said:
Cheers, but unfortunately neither of those worked. I'm at a loss on what else I could try.
Click to expand...
Click to collapse
at less you back to emui 9.1 only to save your phone
first download the firmware from tm team database search the right firmware for your phone
after that unzip the two files then use huawei extractor to extract files from update.app
and follow this instructions
Copy to the following partitions to the adb fastboot folder:
recovery_ramdisk
recovery_vbmeta
recovery_vendor
cust
kernel
system
userdata
product
vendor
Then boot your device in fastboot mode.
note if you dont found recovery ramdisk then rename recovery ramdis to previous name
The commands for fastboot:
fastboot flash recovery_ramdisk recovery_ramdisk.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash cust cust.img
fastboot flash kernel kernel.img
fastboot flash system system.img
aftet that make a wipe / factory reset
what happen to you happen to me the same thing if this work after that then be patience until we get official emui, the last news that i read that huawei postpone release until july
Thanks to kilroystyx
Try this and tell me
yassine2217 said:
at less you back to emui 9.1 only to save your phone
first download the firmware from tm team database search the right firmware for your phone
after that unzip the two files then use huawei extractor to extract files from update.app
and follow this instructions
Copy to the following partitions to the adb fastboot folder:
recovery_ramdisk
recovery_vbmeta
recovery_vendor
cust
kernel
system
userdata
product
vendor
Then boot your device in fastboot mode.
note if you dont found recovery ramdisk then rename recovery ramdis to previous name
The commands for fastboot:
fastboot flash recovery_ramdisk recovery_ramdisk.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash cust cust.img
fastboot flash kernel kernel.img
fastboot flash system system.img
aftet that make a wipe / factory reset
what happen to you happen to me the same thing if this work after that then be patience until we get official emui, the last news that i read that huawei postpone release until july
Thanks to kilroystyx
Try this and tell me
Click to expand...
Click to collapse
Holy f*** thank you. That seems to have worked. It also seems to have fixed the sms problem I had with 9.1.
Afifus said:
Holy f*** thank you. That seems to have worked. It also seems to have fixed the sms problem I had with 9.1.
Click to expand...
Click to collapse
great happy for you
i know there are other threads on this topic. But after going through them I cant find the fix.
I unlocked bootloader and tried to root. Its seems to have worked, but the touchscreen no longer works.
I used lmsa to download the stock rom. installed magisk and ran the boot.img to get the patched boot. Then flashed the patched boot and when i rebooted the device...no touchscreen.
I tried to reflash the original boot.img but that didnt help.
I tried to use LMSA to rescue. but when i connect the phone it says "unable to match firmware. Some key information cannot be read from device."
The original adb fastboot was old. So I did update to the r30 version and tried flashing everything again. but it still boots up and no touchscreen.
Im obviously at a loss here. so any help would be appreciated. Just to even get it back to stock would be fine.
Or do I try to install twrp and throw a custom rom on? would that work. Again, at a loss...
TIA
UPDATE: ive gotten everything sorted. no more bootloop. touchscreen working. connecting to lmsa. and rooted. Thank you for all the responses.
I think what happened is that when i started all this i was not using the latest adb. That seemed to not be an issue for unlocking bootloader, but a major issue for rooting. When i tried to root,i got the no touchscreen. So I followed directions and went to manually flash the stock firmware. I didnt know how to do this and couldnt find instructions for the g power. but did find instructions for the g8 power and assumed it would be the same...its almost the same, but not, so i got the bootloop.
These are the instructions:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot flash super super.img_sparsechunk.11
fastboot flash super super.img_sparsechunk.12
fastboot flash super super.img_sparsechunk.13
fastboot flash super super.img_sparsechunk.14
fastboot flash super super.img_sparsechunk.15
I added fastboot flash super super.img_sparsechunk.15, because the g8 power only has 14 sparsechunks and thats why i kept getting the bootloop. very stupid mistake that was driving me nuts! Once i added that 15th line the phone booted up and touchscreen worked again.
Then i installed magisk manager. Took the boot.img file from my stock rom and put it on my phone. back in magisk i clicked on install a patch file, chose the boot.img and created a magisk_patched.img which i put back into the adb folder i previously used to flash the firmware.
Then went back to fastboot and flashed the magisk_patched.img and the phone is now working and rooted...THANK GOD
cnoevl21 said:
i know there are other threads on this topic. But after going through them I cant find the fix.
I unlocked bootloader and tried to root. Its seems to have worked, but the touchscreen no longer works.
I used lmsa to download the stock rom. installed magisk and ran the boot.img to get the patched boot. Then flashed the patched boot and when i rebooted the device...no touchscreen.
I tried to reflash the original boot.img but that didnt help.
I tried to use LMSA to rescue. but when i connect the phone it says "unable to match firmware. Some key information cannot be read from device."
The original adb fastboot was old. So I did update to the r30 version and tried flashing everything again. but it still boots up and no touchscreen.
Im obviously at a loss here. so any help would be appreciated. Just to even get it back to stock would be fine.
Or do I try to install twrp and throw a custom rom on? would that work. Again, at a loss...
TIA
Click to expand...
Click to collapse
Flash stock ROM manually, it will fix the problem
riyan65 said:
Flash stock ROM manually, it will fix the problem
Click to expand...
Click to collapse
The US stock ROM does not have a 'flash all' option. So i have no idea how to flash it. ugh
cnoevl21 said:
The US stock ROM does not have a 'flash all' option. So i have no idea how to flash it. ugh
Click to expand...
Click to collapse
I just ran into the same problem and asked you about it in the other thread. Right after, I tried the boot from XT2041-4_SOFIA_RETUS_10_QPMS30.80-51-5_subsidy-DEFAULT_regulatory-DEFAULT_CFC and got my touchscreen back.
https ://mirrors.lolinet.com/firmware/moto/sofia/official/RETUS/
I found out more of what's going on and posted in the other thread:
I just did the same exact thing. LMSA gave me SOFIA_RETAIL_QPMS30.80_51_8. Lost touchscreen with the patched boot. Used the stock 30.80_51_8 boot and didn't fix it. Also tried the older QPMS30.80-51-3, no dice.
Oh and LMSA can't rescue... key information cannot be read from device.
I'd appreciate any help. Thanks.
UPDATE - found the boot from XT2041-4_SOFIA_RETUS_10_QPMS30.80-51-5_subsidy-DEFAULT_regulatory-DEFAULT_CFC got the screen working again.
UPDATE 2 - patching -5 still left me no touchscreen. Went back to stock -5 and didn't work. Tried -8 and works again... I'm confused.
UPDATE 3 - when phone booted up, it notified me -8 was just installed... Patched -8 boot again and everything appears to be working fine. Moral of story - LMSA downloads the correct firmware if you give the phone enough time to finish auto-updating before rooting. SMH
haanjamin said:
I found out more of what's going on and posted in the other thread:
I just did the same exact thing. LMSA gave me SOFIA_RETAIL_QPMS30.80_51_8. Lost touchscreen with the patched boot. Used the stock 30.80_51_8 boot and didn't fix it. Also tried the older QPMS30.80-51-3, no dice.
Oh and LMSA can't rescue... key information cannot be read from device.
I'd appreciate any help. Thanks.
UPDATE - found the boot from XT2041-4_SOFIA_RETUS_10_QPMS30.80-51-5_subsidy-DEFAULT_regulatory-DEFAULT_CFC got the screen working again.
UPDATE 2 - patching -5 still left me no touchscreen. Went back to stock -5 and didn't work. Tried -8 and works again... I'm confused.
UPDATE 3 - when phone booted up, it notified me -8 was just installed... Patched -8 boot again and everything appears to be working fine. Moral of story - LMSA downloads the correct firmware if you give the phone enough time to finish auto-updating before rooting. SMH
Click to expand...
Click to collapse
good info to know. but now ive gone i screwed my phone up even worse. cuz now im stuck in boot loop. i was trying 105-5, but ill try 51-5, then -8. maybe one of them is the right stupid firmware for my phone
Do not panic.
Follow this guide to flash correct ROM, and patch boot from the ROM to get root
https://forum.xda-developers.com/moto-g-power/how-to/moto-g-power-flashing-guide-t4159301
mingkee said:
Do not panic.
Follow this guide to flash correct ROM, and patch boot from the ROM to get root
https://forum.xda-developers.com/moto-g-power/how-to/moto-g-power-flashing-guide-t4159301
Click to expand...
Click to collapse
ive tried this. i either dont have (and dont know) which is the correct rom. or some other issue. i can get into fastboot mode, no problem. but when i type fastboot reboot fastboot i get that long list of commands, as if im typing in a bad command. and it does not go into fastbootd. i can, however, get into fastbootd through recovery. but every time i try to flash something there, it fails (no file or directory).
And i cant use LMSA cuz when i try to connect, it says the phone has incorrect firmware.