Related
This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
What if i gave an Oreo ... to our Note 10.1 2014 LTE.
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (Oreo) (yeah, it's Oreo, but it isn't in Project OS Version list yet), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (GApps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
This is an early build for testing. It's not intended as daily driver. Man things are broken and many bugs can occur.
How to flash:
-Be sure you are on 5.1.1 Bootloader and Modem (Flash 5.1.1 firmware via Odin) !
-Flash TWRP (version 3.0.0-0 or newer recommended)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage15.1 Zip > Swipe
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.
What is working
Wifi
S-Pen
MTP/ADB
Sound
Bluetooth
Off Charging
RIL
Camera (photo)
...
What is not working
Camcorder
...
Untested
GAPPS
(F2FS)
GPS
...
Bugs/ other things
SELinux Permissive
Assert check not working
...
Download
Other Builds
Notes:
- just ignore E: Unknown Command errors in TWRP
Changelog:
--Lineage--
20180126: fixed camera, some small things
20180123: updated to LineageOS 15.1, fixed RIL, fixed FC on start, switched to binderized gralloc...
20170925: fixed Bluetooth FC (thanks to Valera1978)
20170921: add support for exFAT/NTFS, fixed camera, TEMP fix for Home wake
20170904: fixed bluetooth, fixed off charging, TEMP add Launcher3, TEMP removed MpDecision, a few smaller changes
20170903: first test release
Credit: LineageOS Team, Maintainer and Valera1978
Kernel Source
XDA:DevDB Information
Unofficial LineageOS (CyanogenMod) 15.1 for SM-P605, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
Source Code: https://github.com/davidmueller13/android_kernel_samsung_msm8974/tree/oreo
ROM OS Version: 8.x Oreo
ROM Firmware Required: 5.1.1 bootloader and modem
Based On: LineageOS
Version Information
Status: Alpha
Created 2017-09-03
Last Updated 2018-01-26
Wow, that was quick! Thank you again for supporting our device so much. Not going to try the very experimental builds atm, because of time constraints, but thank you nonetheless!
Works great for a first release, thanks!
GPS fix doesn't work.
Working GApps: Unofficial Open GApps micro
Root: SuperSU v2.82 SR3
Laucher: Simply select Google Now Launcher after initial setup.
Boot animation is not lagging for me.
One more thing, you forgot to change the ROM OS Version in the OP to 8.0 Oreo.
New build
Changelog:
- fixed bluetooth
- fixed off charging
- TEMP add Launcher3
- TEMP removed MpDecision
- a few smaller changes
Download
Any news David?
BR from Munich, Slawo
New build
Changelog
- add support for exFAT/NTFS
- fixed camera
- TEMP fix for Home wake
Download
Browser mistake , sorry
New build
Changelog:
- fixed Bluetooth FC (thanks to Valera1978)
Download
Hi,
only me?
Kryptokey needed on mega?
Thx for fix @davidmueller13
Thank you for your hard work, David. Keep it up! Samsung has given up on us with 5.1.1. I'm really happy, that our device is still alive!
I am quite busy at the momemt, so I can't help you with beta testing. But I am looking forward to more stable builds !
Awesome rom totally extends the life of the device.
A couple of minor issues:
* TWRP-3.0.3 seems to automatically reboot when it installs the mentioned open_gapps-arm-8.0-micro-20170824-UNOFFICIAL.zip
* Netflix installed from app store but won't launch (not sure if this is Rom specific or lineage 15 in general)
* Physical home button doesn't wake up the device
Other notes:
* Magisk 14.0 worked fine without any issues
temijun said:
Awesome rom totally extends the life of the device.
A couple of minor issues:
* TWRP-3.0.3 seems to automatically reboot when it installs the mentioned open_gapps-arm-8.0-micro-20170824-UNOFFICIAL.zip
Click to expand...
Click to collapse
Use
https://forum.xda-developers.com/ga...ent/recovery-unofficial-twrp-3-1-1-0-t3635803
work fine here.
Think about, 8.0 is alpha version.
So far no major issues
Ok a day is not really representative but apparatus from a a few FC's no big issues (have used today's Gapps build
As currently mostly in WiFi range I might keep it as my daily driver
Tx so far
Thank you for your hard work
Will you support p601 ?
Excelent work! :good:
Only 2 things so far:
- physicaly home button doesn't wake up device
- magnetic cover doesn't work
Impressive build
There is no sound yet?
Thanks for your job
Not compatible with P600 ? Thanks
Testbuild 20171113:
Please test:
- GPS
- GAPPS
Notes: SIM is detected, connection not possible, ADB is not working (for MTP/PTP, disable it in developer options), MPDecision fixed, dex preopt
Download
Please support SM-P605K(Korean model)
davidmueller13 said:
Testbuild 20171113:
Please test:
- GPS
- GAPPS
Notes: SIM is detected, connection not possible, ADB is not working (for MTP/PTP, disable it in developer options), MPDecision fixed, dex preopt
Download
Click to expand...
Click to collapse
Is sound working?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
halogenOS Nougat Is Here for Vibe K5/K5+ !!!!!
Android, Reimagined.
For the best experience, view the thread on a web browser like Chromium or Firefox.
Desktop: Brilliant. Mobile: Good. Tapatalk: OK. XDA-Labs: Horrible.
Code:
/*
* The modifications performed to your device are
* performed by yourself, thus you must perform the
* leap of fate and accept the inevitable outcome, the
* responsibilities of what to do with your device are passed to you.
*
* We are of no responsibility for any damages, data loss
* or results of unexpected outcome, if you have **SERIOUS**
* problems with this software, do not hesitate to contact
* the developers or maintainers of your device port.
*
* We are not liable for anything that happens with your
* device. Shall you somehow screw up and take the leap of faith
* you may find that some companies may do indeed still honour
* warranties, although we cannot give one ourselves.
*
* Don't be stupid and bet on that generosity of companies though,
* please be responsible for what you do with your device.
* Do not try overclocking up to glorious 1337 GHz thinking an OEM
* would replace your glorious space heater only matched by the GTX480 etc.
*
* We recommend you to take the advice above regardless.
*/
XOS is a new generation Android-based cutting-edge OS based on the Android Open Source Project and Code Aurora Forum releases.
What is XOS?
halogenOS, also known as XOS is a new Android ROM which ships with the global aim to
become a modular ROM which keeps as high as potentially possible operating
performance on your mobile device while still maintaining a sufficient feature
base of nice, small and minimal features that would not be available via any
external feature base, extension, mod or plugin.
We hope you have a truly halogenified experience!
Internals of XOS
At core, the ROM is composed mainly of components from the
Android Open Source Project (AOSP) and Code Aurora Forum (CAF),
with extremely minor set of components from LineageOS (LaOS or LN) which
have been added to source in order to allow for better cross-device compatibility.
Our LOVE to others
A huge thanks goes to those behind the AOSP and CAF, the LineageOS Project and all of its
contributors for the sources used in the development of the base ROM which we
started with inclusive of all the work and dedication their team puts in order to
keep us updated on the awesome contributions that they make.
We will be keen on ensuring that we be up to date with the code from our base sources,
with regular ROM updates hopefully coming from time to time.
Please do not ask for ETA's (else you shall be spooked by Mr Skeltal). Almost all of us are
students, and with the current lifestyles and routines we have, it is not that easy to acquire
time to develop the ROM, though we'll be sure to keep you updated and release OTAs as
soon as they are available and ready for publication. If you want to be really updated quick,
then join us on Telegram: http://telegram.me/halogenos
Visit our website for features such as: Downloads, Information etc.
http://halogenos.org
Although no data should be lost or damaged by the flashing process,
we advise you to follow the following steps if you are coming from another ROM:
Code:
* Please take a full [I]Nandroid[/I] backup!
* Please copy your back up to an external device.
* Backing up your [I]Internal Storage[/I] is also recommended.
* When completed, [I]clean flash[/I] the build!
Although you usually may dirty flash halogenOS over other ROMs, considering the other
ROM is built upon the same Android version, it is not guaranteed.
In case of performance issues or crashes please do a clean flash.
You can dirty flash halogenOS 7 (Nougat) over halogenOS 6 (Marshmallow)
without any problems. Although we cannot promise that it will work for you,
although we don't recommend it, we can tell you that this has been tested.
Overall as a ROM, XOS is very stable. Our mission statement has always been of maintaining a clean and properly maintained ROM.
We take proper priority with ensuring that performance and stability are put first, features are considered an extra topping on the cake.
More details are marked by square brackets [x] and listed below
All Builds/Devices/Maintainers
Substratum Theming Support
Custom Button Backlight Implementation
Custom Lockscreen Visualizer
SuperUser Capable
Various Battery Optimizations
Dexpreopt Enabled
Offline Gesture Recognition
Upstream Security Patches
Support for `addon.d` and `init.d`
Equipped with latest Busybox
Application Signature Spoofing Toggle
Support for 3rd Party Webviews
Various Kernel Optimizations
Support for Modern Services e.g. Google Assistant
Long Press Home for Assist
Custom Hotplugging
(DEV) Full KeyHandler & KeyDisabler Support
Enhanced Booting Speed [1]
System UX & Performance Optimizations [2]
Minor Audio Tweaks [3]
Enhanced Media Support [4]
I/O Tweaks [5]
Select Devices/Maintainer Dependent
KCAL Support
Functional Vulkan API Implementation [6]
OnePlus Camera
Alert Slider Support
Code:
[1] Performed via implementation of additional multi-threading on boot etc.
[2] Tweaked [I]`surfaceflinger`, `inputflinger`, `System Server`[/I] & more...
[3] We do not ship 3rd party EQs or other [I]crap[/I] you may sometimes find.
Our sound system is completely clean and thus provides great soundmod
support if that's what one really wants.
[4] Enabled via FFMPEG & additional codecs.
[5] Example: Disabled Access Time
| Waste of write cycles and impacts I/O performance on random writes.
[6] Vulkan is available if the chipset/SOC's GPU supports Vulkan.
Installing for the first time
Code:
* Download the current version of XOS for your device.
* Reboot into a compatible Android Recovery solution. (Note: We recommend TWRP)
* Wipe [B]'/system', '/data' & '/cache'[/B].
[I](Optional: For `Dirty Flash`, do not wipe anything)[/I]
* Select the appropriate ROM zip and flash the current ROM build.
* Want Google Apps? Obtain and flash the latest GApps from http://opengapps.org/
* Flash any other system modifications you may want e.g. SuperSU/phh's SuperUser.
* Reboot.
Screenshots
Currently right now, halogenOS will only include the stock Android theme.
We may one day decide to use a custom theme as soon as that theme is working perfectly fine.
@regalstreak
@xdvs23 (actually xdevs23, but that was already taken on XDA)
@sewer56lol
@jbw716
@marpe
@dango99
@hunter_bruhh
@MSF-Jarvis
@keessonnema
Download Links
Download XOS Here
- Restore Original Bootlogo -
ROM Sources
All Sources | ROM, Kernel, Trees etc. @ XOS GitHub Organisation.
Lenovo Vibe K5
Kernel Source
Device Tree
Vendor Repo
Join our
Vibe K5 Discussion
Vibe K5 Resources
Telegram group
Telegram News Channel
Telegram Off-Topic Group
Code Aurora Forums, CyanogenMod, Grarak
And everyone else who contributed and helps us!
In case you feel left out here, please contact us!
XOS Webpage
XDA:DevDB Information
halogenOS, ROM for the Lenovo Vibe K5 Plus
Contributors
YashGarg10
Source Code: https://github.com/halogenOS/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP , Bootloader Unlocked
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2017-12-19
Created 2017-12-19
Last Updated 2017-12-20
Nice bro, thx
Reserved.
Screenshots Attached.
Criscj said:
Nice bro, thx
Click to expand...
Click to collapse
Wlcm brother.
Thank you for your work with our beloved vibe k5 plus. I'll download, test and report this rom.
Rafael Cardoso said:
Thank you for your work with our beloved vibe k5 plus. I'll download, test and report this rom.
Click to expand...
Click to collapse
Welcome?
Finally a real alternative for PA, thanks!
Bug: Camera Crash taking photo, other camera app works fine
Lautaro Mondaca said:
Finally a real alternative for PA, thanks!
Bug: Camera Crash taking photo, other camera app works fine
Click to expand...
Click to collapse
Flash Camera Fix
More Screenshots.
Which one is better dot os or halogen os ??
What's "halogen os"???
naved03 said:
Which one is better dot os or halogen os ??
Click to expand...
Click to collapse
halogen is almost vanilla android, but thanks to that is really smooth and great performance, like Paranoid Android
naved03 said:
Which one is better dot os or halogen os ??
Click to expand...
Click to collapse
Both Are Try Both And Use Whichever You Like.
Where is the camera fix file?
clebarius said:
Where is the camera fix file?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=673791459329067002
Tribbiani1903 said:
What's "halogen os"???
Click to expand...
Click to collapse
When halogens like Chlorine, Iodine, Fluorine, etc. reacts with sulphur mono oxide it forms Halogen OS
How's the battery life?
Kmehta said:
How's the battery life?
Click to expand...
Click to collapse
Decent.
naved03 said:
Which one is better dot os or halogen os ??
Click to expand...
Click to collapse
Dot os
---------- Post added at 03:26 AM ---------- Previous post was at 03:23 AM ----------
YashGarg10 said:
halogenOS Nougat Is Here for Vibe K5/K5+ !!!!!
Android, Reimagined.
For the best experience, view the thread on a web browser like Chromium or Firefox.
Desktop: Brilliant. Mobile: Good. Tapatalk: OK. XDA-Labs: Horrible.
Code:
/*
* The modifications performed to your device are
* performed by yourself, thus you must perform the
* leap of fate and accept the inevitable outcome, the
* responsibilities of what to do with your device are passed to you.
*
* We are of no responsibility for any damages, data loss
* or results of unexpected outcome, if you have **SERIOUS**
* problems with this software, do not hesitate to contact
* the developers or maintainers of your device port.
*
* We are not liable for anything that happens with your
* device. Shall you somehow screw up and take the leap of faith
* you may find that some companies may do indeed still honour
* warranties, although we cannot give one ourselves.
*
* Don't be stupid and bet on that generosity of companies though,
* please be responsible for what you do with your device.
* Do not try overclocking up to glorious 1337 GHz thinking an OEM
* would replace your glorious space heater only matched by the GTX480 etc.
*
* We recommend you to take the advice above regardless.
*/
XOS is a new generation Android-based cutting-edge OS based on the Android Open Source Project and Code Aurora Forum releases.
What is XOS?
halogenOS, also known as XOS is a new Android ROM which ships with the global aim to
become a modular ROM which keeps as high as potentially possible operating
performance on your mobile device while still maintaining a sufficient feature
base of nice, small and minimal features that would not be available via any
external feature base, extension, mod or plugin.
We hope you have a truly halogenified experience!
Internals of XOS
At core, the ROM is composed mainly of components from the
Android Open Source Project (AOSP) and Code Aurora Forum (CAF),
with extremely minor set of components from LineageOS (LaOS or LN) which
have been added to source in order to allow for better cross-device compatibility.
Our LOVE to others
A huge thanks goes to those behind the AOSP and CAF, the LineageOS Project and all of its
contributors for the sources used in the development of the base ROM which we
started with inclusive of all the work and dedication their team puts in order to
keep us updated on the awesome contributions that they make.
We will be keen on ensuring that we be up to date with the code from our base sources,
with regular ROM updates hopefully coming from time to time.
Please do not ask for ETA's (else you shall be spooked by Mr Skeltal). Almost all of us are
students, and with the current lifestyles and routines we have, it is not that easy to acquire
time to develop the ROM, though we'll be sure to keep you updated and release OTAs as
soon as they are available and ready for publication. If you want to be really updated quick,
then join us on Telegram: http://telegram.me/halogenos
Visit our website for features such as: Downloads, Information etc.
http://halogenos.org
Although no data should be lost or damaged by the flashing process,
we advise you to follow the following steps if you are coming from another ROM:
Code:
* Please take a full [I]Nandroid[/I] backup!
* Please copy your back up to an external device.
* Backing up your [I]Internal Storage[/I] is also recommended.
* When completed, [I]clean flash[/I] the build!
Although you usually may dirty flash halogenOS over other ROMs, considering the other
ROM is built upon the same Android version, it is not guaranteed.
In case of performance issues or crashes please do a clean flash.
You can dirty flash halogenOS 7 (Nougat) over halogenOS 6 (Marshmallow)
without any problems. Although we cannot promise that it will work for you,
although we don't recommend it, we can tell you that this has been tested.
Overall as a ROM, XOS is very stable. Our mission statement has always been of maintaining a clean and properly maintained ROM.
We take proper priority with ensuring that performance and stability are put first, features are considered an extra topping on the cake.
More details are marked by square brackets [x] and listed below
All Builds/Devices/Maintainers
Substratum Theming Support
Custom Button Backlight Implementation
Custom Lockscreen Visualizer
SuperUser Capable
Various Battery Optimizations
Dexpreopt Enabled
Offline Gesture Recognition
Upstream Security Patches
Support for `addon.d` and `init.d`
Equipped with latest Busybox
Application Signature Spoofing Toggle
Support for 3rd Party Webviews
Various Kernel Optimizations
Support for Modern Services e.g. Google Assistant
Long Press Home for Assist
Custom Hotplugging
(DEV) Full KeyHandler & KeyDisabler Support
Enhanced Booting Speed [1]
System UX & Performance Optimizations [2]
Minor Audio Tweaks [3]
Enhanced Media Support [4]
I/O Tweaks [5]
Select Devices/Maintainer Dependent
KCAL Support
Functional Vulkan API Implementation [6]
OnePlus Camera
Alert Slider Support
Code:
[1] Performed via implementation of additional multi-threading on boot etc.
[2] Tweaked [I]`surfaceflinger`, `inputflinger`, `System Server`[/I] & more...
[3] We do not ship 3rd party EQs or other [I]crap[/I] you may sometimes find.
Our sound system is completely clean and thus provides great soundmod
support if that's what one really wants.
[4] Enabled via FFMPEG & additional codecs.
[5] Example: Disabled Access Time
| Waste of write cycles and impacts I/O performance on random writes.
[6] Vulkan is available if the chipset/SOC's GPU supports Vulkan.
Installing for the first time
Code:
* Download the current version of XOS for your device.
* Reboot into a compatible Android Recovery solution. (Note: We recommend TWRP)
* Wipe [B]'/system', '/data' & '/cache'[/B].
[I](Optional: For `Dirty Flash`, do not wipe anything)[/I]
* Select the appropriate ROM zip and flash the current ROM build.
* Want Google Apps? Obtain and flash the latest GApps from http://opengapps.org/
* Flash any other system modifications you may want e.g. SuperSU/phh's SuperUser.
* Reboot.
Screenshots
Currently right now, halogenOS will only include the stock Android theme.
We may one day decide to use a custom theme as soon as that theme is working perfectly fine.
@regalstreak
@xdvs23 (actually xdevs23, but that was already taken on XDA)
@sewer56lol
@jbw716
@marpe
@dango99
@hunter_bruhh
@MSF-Jarvis
@keessonnema
Download Links
Download XOS Here
- Restore Original Bootlogo -
ROM Sources
All Sources | ROM, Kernel, Trees etc. @ XOS GitHub Organisation.
Lenovo Vibe K5
Kernel Source
Device Tree
Vendor Repo
Join our
Vibe K5 Discussion
Vibe K5 Resources
Telegram group
Telegram News Channel
Telegram Off-Topic Group
Code Aurora Forums, CyanogenMod, Grarak
And everyone else who contributed and helps us!
In case you feel left out here, please contact us!
XOS Webpage
XDA:DevDB Information
halogenOS, ROM for the Lenovo Vibe K5 Plus
Contributors
YashGarg10
Source Code: https://github.com/halogenOS/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP , Bootloader Unlocked
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2017-12-19
Created 2017-12-19
Last Updated 2017-12-20
Click to expand...
Click to collapse
Ty for this awsm rom smooth ROM
bug in the mobile network, does not recognize.
as fix ?
speed rom nice ,.
My LuisROM based on cdDroid V6.x for Oneplus 5T (dumpling)
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is my personal custom rom. LuisROM based on the crDroid, LineageOS and other...
This is a ROM that works on Oneplus 5T (dumpling) snapdrgon only! This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
I will NOT provide support if you install a custom kernel!
Changelogs: http://luis-builds.de/downloads/lineageos/cr/oneplus5t/changelog_dumpling.txt
Introduction
Hello Friends!
I had troubles to find current builds for my devices so I decided to make regular builds for my devices. When my friends told me about similar problems, I extended the builds to include their devices as well. So these builds were and are mainly for my friends and me, but I finally decided to provide them also for public download.
My ROMs
My LuisROM an awesome combination of performance, customization, power and the most new features, brought directly to your device. The LuisROM build server generates automaticly every 2nd days new builds directly from the sources.
Notice
Sometimes I get a lot of help or feature requests from users of my LuisROMs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs . Please understand if I can not always answer directly.
ROM features:
Based on the latest cdDroid V6.x (Android 10), LineageOS and AOSP sources
Latest security patches and sources
OTA Updater
Compatible with EX Kernel Manager
Many other misc. performance and stability improvements under the hood
Kernel: Linux 4.4.x Kernel with many mods other devs and me (thanks for your incredible work!)
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
Boeffla Wakelock blocker driver V1.1.0
More I/O-Schedulers (fiops, sio, zen, maple)
Optimized for performance and battery life
Compatible with systemless root (recommend Magisk 20.x !!!)
Many other misc. improvements not listed here
Installation instructions:
Pre-installation:
TWRP Recovery of course (download here)
Tested with Oxygen OS 9.0.10 firmware. (download here)
Magisk 20.x and above (Link) can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
Unlock your bootloader
Install lates Oxygen firmware (tested 9.0.10)
Flash recovery zip (TWRP)
Flash my latest LuisROM (download here)
Optional: Flash Open GApps and Magisk 20.x and above
Reboot and enjoy
OTA App update installation (auto):
Go to crDroid > About cdDroid > Updates
Press reload button (right corner)
Select download on the new build list
After download select update/flash new build
Optional: Installed gapps and magisk will be moved into new system automaticaly !
TWRP update installation (manual):
Download latest LuisROM build (download here)
Boot into Recovery TWRP
Flash my updated LuisROM (download here)
Reboot and enjoy
Download
Latest builds: (http://luis-builds.de/downloads/lineageos/cr/oneplus5t/)
Latest Oxygen firmware: (download)
My other devices/ROMs: (http://luis-builds.de/downloads/lineageos/)
Download OpenGapps: (http://opengapps.org)
Flash latest TWRP Recovery: (download here)
Donate for my dog Luis, he is looking forward to an extra bone:
https://bw2.link/LuisDonation
Changelog
Developer: http://luis-builds.de/downloads/lineageos/cr/oneplus5t/changelog_dumpling.txt
Known Issus
..
Telegram group:
https://t.me/rr_luisrom
Thanks To/Credits
Special thanks to Teams:
LineageOS team: https://www.lineageos.org
crDroid Team: https://crdroid.net/
OMNI team https://omnirom.org/about/
SLIMROMS https://slimroms.org/#/about
topjohnwu (Magisk) https://forum.xda-developers.com/apps/magisk
Thanks to the best devs on earth:
LuK1337 (https://forum.xda-developers.com/member.php?u=5075128)
PeterCxy (https://forum.xda-developers.com/member.php?u=5351691)
francokernel (https://forum.xda-developers.com/member.php?u=3292224)
sultanxda (https://forum.xda-developers.com/member.php?u=4800121)
flar2 (https://forum.xda-developers.com/member.php?u=4684315)
nathanchance (https://forum.xda-developers.com/member.php?u=6842057)
zx2c4 for the wireguard vpn ROM Integration (https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635)
phhusson for some blobs (https://github.com/phhusson)
and of course to all the supporters.
Thanks for the Sources/Blobs/Tweaks
crDroid (https://github.com/LineageOS)
Omnirom (https://github.com/omnirom)
TheMuppets (https://github.com/TheMuppets)
neobuddy89 (https://github.com/neobuddy89)
My Sources/Blobs/Tweaks
DEVICE (https://github.com/FraEgg/android_device_oneplus_dumpling)
KERNEL (https://github.com/FraEgg/android_kernel_oneplus_msm8998)
XDA:DevDB Information
[ROM][OP5T][10]LuisROM Android 10 based on crDroid V6.x [DUMPLING], ROM for the OnePlus 5T
Contributors
8224Freak
Source Code: Source Link: https://github.com/FraEgg
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: 9.0.11
Based On: LineageOS, crDroid, AOSP
Version Information
Status: Beta
Beta Release Date: 2020-03-24
Created 2020-01-26
Last Updated 2020-03-24
Reserved
Huge request to add TTL fixation support to the kernel
Thanks for the ROM!
But I have problem after flash your ROM. I'm stuck at setup wizard, my carrier not detected (Indonesia carrier network, already tried to remove then insert sim card again but still no luck). And at wifi setup it still searching and won't find any network (I have excellent wifi network here and detected with other ROM).
EDIT : after following flashing order by @sant03 now this rom running flawlessly on my 5t. very smooth and nearly haven't facing fps drop on gaming. thanks a lot @8224Freak !
wahing said:
Thanks for the ROM!
But I have problem after flash your ROM. I'm stuck at setup wizard, my carrier not detected (Indonesia carrier network, already tried to remove then insert sim card again but still no luck). And at wifi setup it still searching and won't find any network (I have excellent wifi network here and detected with other ROM).
Click to expand...
Click to collapse
Hi,
Pls check your firmware.
Cu Frank
8224Freak said:
Hi,
Pls check your firmware.
Cu Frank
Click to expand...
Click to collapse
i already flashed firmware 9.0.10 before flash the rom.
and the previous rom i used was OOS 9.0.10
wahing said:
i already flashed firmware 9.0.10 before flash the rom.
and the previous rom i used was OOS 9.0.10
Click to expand...
Click to collapse
I too came from OOS 9.0.10, NO issues here. Very smooth Rom.
hmm i think i know the problem, just notice the magisk point in pre install section.
so i assume the flashing order is :
1. flash rom
2. flash gapps
3. reboot
4. after successufully boot into OS and setup, then go back to recovery to install magisk
isn't it?
wahing said:
hmm i think i know the problem, just notice the magisk point in pre install section.
so i assume the flashing order is :
1. flash rom
2. flash gapps
3. reboot
4. after successufully boot into OS and setup, then go back to recovery to install magisk
isn't it?
Click to expand...
Click to collapse
That's what I did
[email protected] said:
Huge request to add TTL fixation support to the kernel
Click to expand...
Click to collapse
Done! Looking for the next builds...
Cu Frank
8224Freak said:
Done! Looking for the next builds...
Cu Frank
Click to expand...
Click to collapse
Type in the next kernel will already have support? And can I put me on the off version?
Does this ROM have the System Profiles like crDroid V5 does? That's a very useful feature I missed when I upgraded to other Android 10 ROMs, which is why I downgraded.
sant03 said:
That's what I did
Click to expand...
Click to collapse
alright, i'll try tomorrow. thank you so much!
Any plans for mirrors???......download speed very poor from given source, 2+ hours......:crying:
I can t find 9 .0.10 firmware in sourceforge,only 9.0.9.
Anybody can help with this or post another link?
broky said:
I can t find 9 .0.10 firmware in sourceforge,only 9.0.9.
Anybody can help with this or post another link?
Click to expand...
Click to collapse
here you go:
https://forum.xda-developers.com/showthread.php?t=3728665&p=81425595
Tnx for your hard.work
Thanks!!.. Great rom
I found a bug, when using the system profiles option the phone restarts
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
Thanks for building to 5T. Are you skipping Resurrection Remix OS for Android 19 now? I've been a fan of those roms for several devices much because of the possibility to edit navbar behavior.
i found another issue, double tap to wake somtimes didnt work.
C A O S 11
< Your warranty is now void! >
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
CAOS 11 (Custom AOSP OS) is a project which based on @phhusson's Treble GSI AOSP 11. I began it because original project have not only pros (stability, speed, support) but also some issues and limitations - pure AOSP code have some bugs / haven't much useful things and it's a hard way pulling it. So i did this fork. System can run with SELinux enforced state, as an original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method), and in the Recovery do Wipe Data or Factory reset
UPDATE VERSION
latest build: 2022.03.21
treble patches: v316
SPL: 5 Mar 2022
FEATURES/CHANGES
see Project page changelog
DOWNLOAD (CL1CK HERE)
vanilla, gapps, go-gapps: all possible architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
Z = dynamic superuser included
-lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)
so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on AOSP Roar (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally etc etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson
projects: TrebleGSI • BlissROMs • crDroid • PixelExperience • ION • neon-OS • Havoc-OS • LineageOS • Evolution-X • LiquidRemix • ExtendedUI • GrapheneOS • ABC Rom • SyberiaOS • RevengeOS • ProtonAOSP
#include_one
#include_two
Great to this thread comes up... it been long time coming.
Can't wait to see when a CAOS is build on Android 12
eremitein said:
KN0WN BUGS• excluding fixes, the same as on AOSP Quack
Click to expand...
Click to collapse
Guess this should read "the same as on AOSP Roar"
Hi,
I flashed CAOS R 2021.04.19 in my HTC U12 life but DigitalWellbeing tools are not available. Is it only available for pixel devices ?
And I'm unable to transfer files using USB connection? Any suggestions or work around to get it working ?
Thank you.
nsbandara said:
Hi,
I flashed CAOS R 2021.04.19 in my HTC U12 life but DigitalWellbeing tools are not available. Is it only available for pixel devices ?
And I'm unable to transfer files using USB connection? Any suggestions or work around to get it working ?
Thank you.
Click to expand...
Click to collapse
are you flashed gappsed variant? i just added Wellbeing but can't test it now, my device have small system partition and i can't easy flash gappsed build
for MTP try enable file transfer in Developer settings
eremitein said:
are you flashed gappsed variant? i just added Wellbeing but can't test it now, my device have small system partition and i can't easy flash gappsed build
for MTP try enable file transfer in Developer settings
Click to expand...
Click to collapse
Yes, I flashed caos-v305-210419-arm64-agZ. I'm unable to find any settings/app entry for WellBeing.
@eremitein - thanks for your work. The ROM is great and fast.
I have it installed on Xiaomi Poco X3 Pro. There are some problems with sound and screen backlight but both of them can be resolved from Phh treble settings. I have posted solutions in X3 Pro thread.
I have one question - in case I would like to update CAOS in future. Is there any "official" way to do this ? Is it possible at all ? Or clean flash is required every time you post new version ?
nsbandara said:
Yes, I flashed caos-v305-210419-arm64-agZ. I'm unable to find any settings/app entry for WellBeing.
Click to expand...
Click to collapse
sad, but i guess you have same with AOSP
as400l said:
I have one question - in case I would like to update CAOS in future. Is there any "official" way to do this ? Is it possible at all ? Or clean flash is required every time you post new version ?
Click to expand...
Click to collapse
How to update GSI
< only same ROM variants >
• go to TWRP, make wipe Dalvik cache (optionally, but recommended)
• install new GSI img to system (or reboot to fastboot/fastbootd and flash GSI)
• boot to TWRP again, resize System
• reinstall same GApps if used before
note: dirty update is not supports by me, do not send bug reports - if you will have bugs first try clean install
CAOS v306 2021.04.24
download /// changelog
Big fan of this CF. I hope there is a option to update (with further versions) using fastboot/adb. (Without loosing data) My Oukitel WP6 just supports these 2 options .
Balsamderaersche said:
My Oukitel WP6 just supports these 2 options .
Click to expand...
Click to collapse
I have one too, and you can simply flash a new version on top of the old one in fastboot without wiping, works totally fine without loss of data.
BTW @eremitein , did you work some magic on VoLTE in the latest releases, or is it on @phhusson side? For me it just works out of the box suddenly, no more fiddling with IMS or APN settings, see screenshot. This is on your latest crDRom, really really nice, see screenshot:
GroovyG said:
I have one too, and you can simply flash a new version on top of the old one in fastboot without wiping, works totally fine without loss of data.
BTW @eremitein , did you work some magic on VoLTE in the latest releases, or is it on @phhusson side? For me it just works out of the box suddenly, no more fiddling with IMS or APN settings, see screenshot. This is on your latest crDRom, really really nice, see screenshot:
Click to expand...
Click to collapse
So basically just:
fastboot flash system xxx.img
?
Yeah!
And a
fastboot erase cache
never hurts, just to have no junk left in there.
GroovyG said:
BTW @eremitein , did you work some magic on VoLTE in the latest releases, or is it on @phhusson side? For me it just works out of the box suddenly, no more fiddling with IMS or APN settings, see screenshot. This is on your latest crDRom, really really nice, see screenshot:
Click to expand...
Click to collapse
is it 21.04.28 build?
No, that's on 21.04.25, didn't see you had a new one up already again, going to install later today
This is hands down the best ROM I have ever used, huge props to you!
Please help me and give me the download links for ( A705FN im arm64-ab )
I'm confused
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions, and proper bug reports are important to us but don't be disrespectful to anyone here. Your suggestions and proper bug reports will be taken into consideration.."
PixelPlusUI is another aftermarket AOSP ROM Minimal UI & close to Stock Android ROM. What differentiates us from the rest, you ask? LET'S FIND OUT. It has additional localized and personalized functionality while preserving the stock Android look by adhering to Material Design guidelines. Unlike OEMs' slow and untimely updates, we closely follow Google to bring the latest updates to our users, and even prolonging support to devices that have been declared obsolete by OEMs. Our ROMs' source code is open-source, secure, stable, and outstanding. Your experience using PixelPlusUI will be butter smooth with added convenience and features. The main aim of this form is to give the user a better experience without compromising the quality of the Android experience so that no one struggles with any kind of difficulties while using their device. PixelPlusUI brings a better UI/UX to Android with a seamless experience coupled with customizations and user security. In short, it's perfectly balanced between Great Performance, Security, Stability, Minimal UI & Awesome features including pixel goodies But this doesn't mean we aim to provide all the customization available on the planet. So do not hesitate anymore, join us now and start enjoying the beauty of stock Android. Download and enjoy PixelPlusUI on your respective devices!
- Kostya Maslennikov - Founder
- Saurav - Co-Founder & Co-lead
- Hamza - Core Developer & Team
- Abhishek - Support Team
- And Also Our Hardworking Maintainers
// Checkout the latest changes you get //
Latest Changelog: https://ppui.site/changelog
// A screenshot is worth of thousand words //
Latest Screenshots : https://ppui.site/gallery
NOTE : Well here you get all the useful features and with updating source every month it's hard to keep all the threads updated everytime everywhere so kindly visit our website for latest changes and screenshots.
--------- Official Download Server ! ---------
Note: You can check our Website for more details, guides , changelog etc related to build !
-- DEVICE UPDATE TELEGRAM CHANNEL --
-- SUPPORT/DISCUSSION TELEGRAM GROUP --
-- Visit our OFFICIAL Website
-- OUR OFFICIAL TWITTER HANDLE --
NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
CLEAN FLASH :
- Download the latest build
- Reboot to recovery.
- Take a backup.
- Flash the latest build
- Flash Fcrypt [If you want to decrypt else u can skip]
- Format data
- Reboot
DIRTY FLASH :
- Download the latest build
- Reboot to recovery
- Flash the latest build
- Wipe Cache
- Reboot
What works?
Wifi | RIL | Mobile data | GPS | Camera
Flashlight | Camcorder | Bluetooth | Fingerprint reader | Lights | Sound | vibration
Almost everything
What doesn't work?
ScreenRecord ;( but use any external
BUG REPORT !!
As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
for more READ THIS
- Android Open-Source Project
- Pixel Experience
- LineageOS
- Proton-AOSP
- AOSPA
- Others, I forgot to mention
PixelPlusUI XDA Templates credit goes to
- GOUSAL TONI
- Android OS version: 12.1
- Security patch: August 2022
- Build author/Device Maintainer : Kaike
- DEVICE: Redmi 9/Poco M2
- DEVICE CODENAME: Lava
Sources and Documentation
- ROM Source Code
- Kernel Source
- OFFICIAL DEVICES
// Giving little CAN HELP A LOT //
- As you know build is free but building ROM needs a server. And Maintaining source and device stuff needs a server and it's pretty expensive for a student.
- Do consider donating on Patreon for sustainable support and rewards or buying me a coffee if you want to appriciate our work.
- Thank you for your support !
* UPI ID: [email protected] (Indian Users)
* Paypal: https://www.paypal.me/uglykid24
Could you provide a link for fcrypt disabler? I generally always prefer to download things from reliable sources
I installed the rom but found all recovery and fastboot overwritten!
I wanted to reinstall the old recovery and it doesn't work, I tried flashing from fastboot but the recover doesn't change.
Now how do I put magisk and root back?
EDIT: I was able to install magisk with sideload, pero I would like to understand ce problem there is with recovery, because I can't change it.
Hi Helmen, try flash magisk through pixel recovery, you're able to do it. First select apply update and use adb sideload or sdcard method, select magisk, after reboot system and install Official TWRP App on PlayStore, after you can simply flash the recovery img through it.
Thank you for your reply!
Please confirm if I understand correctly, you tell me to install magisk with recovery pixel sideload (done yesterday, it worked) and then install TWRP from the playstore (this) and change recovery using this app while the rom is running?
If I understand you correctly I'd like to ask you two more questions about that:
1) previously I had installed a specific version for my lancelot (this), if I get the version from the store isn't it generic?
2) if it's okay to use the TWRP version on the store, don't they also have a site to download directly from it? I generally prefer to get the open software from other sources if it's possible (like fdroid).
Is this the official source? https://twrp.me/
Hi Again
The TWRP app from PlayStore is for download Official TWRP and Flash recovery images with Root permission and you'll use this option. You'll download the recovery.img , after you'll open the TWRP app, give all permissions (including magisk permissions) after select flash image and find the recovery.img in your store, confirm and flash. After if you reboot on recovery you'll see that changed.
You can uninstall the TWRP APP after use it. Enjoy
many thanks for the help.
In the meantime I am trying the rom and I can't connect with the phone.
Is it possible that there is a problem connecting to the networks? both the SIM cards I insert are recognized but none of them can connect.
Yet the phone seems to find the networks when I put the manual search
I didn't face this problem, ig it won't happen with you.
I was able to reinstall the old recovery, however I can no longer backup partitions or send files. can't figure out what's going on.
If I try to backup to the sd it gives an error:
Can not create '/external_sd/TWRP/BACKUPS/000serial000' folder (I/O error).
Failed to make backup folder.
if I try to backup to internal memory it gives this other error:
Can not create '/data/media/0/TWRP' folder (Required key not available).
Failed to make backup folder.
If you have any ideas let me know, because this way I don't even know how to put the phone back together again
Here it seems that someone has the same problem with pixel experience: https://forum.xda-developers.com/t/...ion-errors-all-the-time.4203951/post-84464765
by wiping the internal storage you start to be able to make backups again, however, I accidentally wiped the data anceh and the rom doesn't boot anymore, it always goes back to recovery, now I try to reinstall everything.
Format data and reboot system
Screen recoder problem is very annoing lately even cast doesn't work. I've tried using external screen recorder but still it doesn't work
helmen said:
Thank you for your reply!
Please confirm if I understand correctly, you tell me to install magisk with recovery pixel sideload (done yesterday, it worked) and then install TWRP from the playstore (this) and change recovery using this app while the rom is running?
If I understand you correctly I'd like to ask you two more questions about that:
1) previously I had installed a specific version for my lancelot (this), if I get the version from the store isn't it generic?
2) if it's okay to use the TWRP version on the store, don't they also have a site to download directly from it? I generally prefer to get the open software from other sources if it's possible (like fdroid).
Is this the official source? https://twrp.me/
Click to expand...
Click to collapse
Hi
You and reflash twrp whenever you want to use
hi , i have a question bro , i can flash this rom with a twrp custom recovery
kaike_ said:
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions, and proper bug reports are important to us but don't be disrespectful to anyone here. Your suggestions and proper bug reports will be taken into consideration.."
PixelPlusUI is another aftermarket AOSP ROM Minimal UI & close to Stock Android ROM. What differentiates us from the rest, you ask? LET'S FIND OUT. It has additional localized and personalized functionality while preserving the stock Android look by adhering to Material Design guidelines. Unlike OEMs' slow and untimely updates, we closely follow Google to bring the latest updates to our users, and even prolonging support to devices that have been declared obsolete by OEMs. Our ROMs' source code is open-source, secure, stable, and outstanding. Your experience using PixelPlusUI will be butter smooth with added convenience and features. The main aim of this form is to give the user a better experience without compromising the quality of the Android experience so that no one struggles with any kind of difficulties while using their device. PixelPlusUI brings a better UI/UX to Android with a seamless experience coupled with customizations and user security. In short, it's perfectly balanced between Great Performance, Security, Stability, Minimal UI & Awesome features including pixel goodies But this doesn't mean we aim to provide all the customization available on the planet. So do not hesitate anymore, join us now and start enjoying the beauty of stock Android. Download and enjoy PixelPlusUI on your respective devices!
- Kostya Maslennikov - Founder
- Saurav - Co-Founder & Co-lead
- Hamza - Core Developer & Team
- Abhishek - Support Team
- And Also Our Hardworking Maintainers
// Checkout the latest changes you get //
Latest Changelog: https://ppui.site/changelog
// A screenshot is worth of thousand words //
Latest Screenshots : https://ppui.site/gallery
NOTE : Well here you get all the useful features and with updating source every month it's hard to keep all the threads updated everytime everywhere so kindly visit our website for latest changes and screenshots.
--------- Official Download Server ! ---------
Note: You can check our Website for more details, guides , changelog etc related to build !
-- DEVICE UPDATE TELEGRAM CHANNEL --
-- SUPPORT/DISCUSSION TELEGRAM GROUP --
-- Visit our OFFICIAL Website
-- OUR OFFICIAL TWITTER HANDLE --
NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
CLEAN FLASH :
- Download the latest build
- Reboot to recovery.
- Take a backup.
- Flash the latest build
- Flash Fcrypt [If you want to decrypt else u can skip]
- Format data
- Reboot
DIRTY FLASH :
- Download the latest build
- Reboot to recovery
- Flash the latest build
- Wipe Cache
- Reboot
What works?
Wifi | RIL | Mobile data | GPS | Camera
Flashlight | Camcorder | Bluetooth | Fingerprint reader | Lights | Sound | vibration
Almost everything
What doesn't work?
ScreenRecord ;( but use any external
BUG REPORT !!
As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
for more READ THIS
- Android Open-Source Project
- Pixel Experience
- LineageOS
- Proton-AOSP
- AOSPA
- Others, I forgot to mention
PixelPlusUI XDA Templates credit goes to
- GOUSAL TONI
- Android OS version: 12.1
- Security patch: August 2022
- Build author/Device Maintainer : Kaike
- DEVICE: Redmi 9/Poco M2
- DEVICE CODENAME: Lava
Sources and Documentation
- ROM Source Code
- Kernel Source
- OFFICIAL DEVICES
// Giving little CAN HELP A LOT //
- As you know build is free but building ROM needs a server. And Maintaining source and device stuff needs a server and it's pretty expensive for a student.
- Do consider donating on Patreon for sustainable support and rewards or buying me a coffee if you want to appriciate our work.
- Thank you for your support !
* UPI ID: [email protected] (Indian Users)
* Paypal: https://www.paypal.me/uglykid24
Click to expand...
Click to collapse
Hi
Thank you so much for developing this amazing ROM
Everything works great
Please can you update the project to the latest build 2.1
Project Elixir
Thank You
kaike_ said:
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions, and proper bug reports are important to us but don't be disrespectful to anyone here. Your suggestions and proper bug reports will be taken into consideration.."
PixelPlusUI is another aftermarket AOSP ROM Minimal UI & close to Stock Android ROM. What differentiates us from the rest, you ask? LET'S FIND OUT. It has additional localized and personalized functionality while preserving the stock Android look by adhering to Material Design guidelines. Unlike OEMs' slow and untimely updates, we closely follow Google to bring the latest updates to our users, and even prolonging support to devices that have been declared obsolete by OEMs. Our ROMs' source code is open-source, secure, stable, and outstanding. Your experience using PixelPlusUI will be butter smooth with added convenience and features. The main aim of this form is to give the user a better experience without compromising the quality of the Android experience so that no one struggles with any kind of difficulties while using their device. PixelPlusUI brings a better UI/UX to Android with a seamless experience coupled with customizations and user security. In short, it's perfectly balanced between Great Performance, Security, Stability, Minimal UI & Awesome features including pixel goodies But this doesn't mean we aim to provide all the customization available on the planet. So do not hesitate anymore, join us now and start enjoying the beauty of stock Android. Download and enjoy PixelPlusUI on your respective devices!
- Kostya Maslennikov - Founder
- Saurav - Co-Founder & Co-lead
- Hamza - Core Developer & Team
- Abhishek - Support Team
- And Also Our Hardworking Maintainers
// Checkout the latest changes you get //
Latest Changelog: https://ppui.site/changelog
// A screenshot is worth of thousand words //
Latest Screenshots : https://ppui.site/gallery
NOTE : Well here you get all the useful features and with updating source every month it's hard to keep all the threads updated everytime everywhere so kindly visit our website for latest changes and screenshots.
--------- Official Download Server ! ---------
Note: You can check our Website for more details, guides , changelog etc related to build !
-- DEVICE UPDATE TELEGRAM CHANNEL --
-- SUPPORT/DISCUSSION TELEGRAM GROUP --
-- Visit our OFFICIAL Website
-- OUR OFFICIAL TWITTER HANDLE --
NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
CLEAN FLASH :
- Download the latest build
- Reboot to recovery.
- Take a backup.
- Flash the latest build
- Flash Fcrypt [If you want to decrypt else u can skip]
- Format data
- Reboot
DIRTY FLASH :
- Download the latest build
- Reboot to recovery
- Flash the latest build
- Wipe Cache
- Reboot
What works?
Wifi | RIL | Mobile data | GPS | Camera
Flashlight | Camcorder | Bluetooth | Fingerprint reader | Lights | Sound | vibration
Almost everything
What doesn't work?
ScreenRecord ;( but use any external
BUG REPORT !!
As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
for more READ THIS
- Android Open-Source Project
- Pixel Experience
- LineageOS
- Proton-AOSP
- AOSPA
- Others, I forgot to mention
PixelPlusUI XDA Templates credit goes to
- GOUSAL TONI
- Android OS version: 12.1
- Security patch: August 2022
- Build author/Device Maintainer : Kaike
- DEVICE: Redmi 9/Poco M2
- DEVICE CODENAME: Lava
Sources and Documentation
- ROM Source Code
- Kernel Source
- OFFICIAL DEVICES
// Giving little CAN HELP A LOT //
- As you know build is free but building ROM needs a server. And Maintaining source and device stuff needs a server and it's pretty expensive for a student.
- Do consider donating on Patreon for sustainable support and rewards or buying me a coffee if you want to appriciate our work.
Click to expand...
Click to collapse
As of 12 22 2022, the download links in the link that you provided for Redmi 9 aren't working or broken. Could you somehow inform who has the authority to fix it. Thanks!
helmen said:
many thanks for the help.
In the meantime I am trying the rom and I can't connect with the phone.
Is it possible that there is a problem connecting to the networks? both the SIM cards I insert are recognized but none of them can connect.
Yet the phone seems to find the networks when I put the manual
Click to expand...
Click to collapse
I think you lost your IMEI number if you haven't backup it, its very hard to get it back , rebooting and flashing stock rom re-flashing rom will not work (I'm not sure if you lost it or not)
HI, man I cant find the link of my advice can you help me please ?
redmi 9 is removed from the list ?
Hello, FM Radio of Redmi 9 works?