Related
Systemless Root & SafetyNet working [GUIDE][Magisk][StockROM-6.0.1][SkyMelon][TWRP]
Hi XDA friends,
After quite investigation I finally have found the way to have our devices Systemless Rooted.
The main advantage? SafetyNet working on our rooted device. That means Google does not notice our device is rooted ...yes, you can play Nintendo games or use Android Pay as well!
View attachment 4371569 View attachment 4371476
Here is the step by step guide:
You Must Have: Unlocked bootloader, ADB Fastboot drivers and Flashtool installed.
- Flash Stock Android 6.0.1 ROM with Flashtool (Wipes checked). I recommend 26.3.A.1.33 for the E2303 model. You can find Stock ROMs in this post.
- Flash TWRP from ADB: "fastboot flash recovery recovery.img" (I tried with v3.0.2.0 and also the new v3.2.1-0 recently published here!)
- Flash custom kernel (SkyMelon 8.1 or 9 without-root) from TWRP. Download v8.1 from this post or v9 directly here: View attachment 9-20171210-no-root.zip. Wipe Dalvik/Cache after install it.
- Flash the latest version of Magisk with TWRP. Wipe Dalvik/Cache after install it. GitHub repo: https://github.com/topjohnwu/Magisk/releases
- Install the latest version of Magisk Manager.apk. GitHub repo: https://github.com/topjohnwu/MagiskManager/releases
- [Optional] In order to avoid flashing errors with TWRP it is recommended to update directly through Magisk Manager. If you want to install previous versions of Magisk (between v14.6 and v15.2), could be neccesary to check the box "Preserve AVB 2.0/dm-verity" before "Direct Install" it.
Note: Magisk v16.4 and Magisk Manager v5.7.0 was the last version working tested by me. From this version I will discontinue testing new Magisk releases on this device. Feel free to post your experience with the new ones
- This method is compatible with E2303, E2306 (reported by @zputnyq) and E2333 (reported by @Yester_Ko) models.
- Compatibility with Apps2SD reported by @tim_pear
Please if this works for you, thanks are very welcome to my first post! Also ideas or improvements to the post are welcome.
Credits:
- Special thanks to @osmank3 who built SkyMelon v9 without-root and help me with Magisk updates.
thanks for sharing your experience , I have A question what about DRM fix , did restore you TA backup ?
Hi! Thanks for your guide. Can you share your safety net check screen on magisk? I try that kernel and some other kernels with different magisk versions, but I don't understand safety net checking status.
Hi othmane.os,
I cannot provide information about restoring the TA. My warranty expired some time ago and I don´t have a TA backup.
Thanks for comment.
othmane.os said:
thanks for sharing your experience , I have A question what about DRM fix , did restore you TA backup ?
Click to expand...
Click to collapse
Hi osmank3,
I have modified the post with the screenshot request and also with some links to the material used in the guide.
If you have any problem, I will be glad to help you. Thanks for comment.
osmank3 said:
Hi! Thanks for your guide. Can you share your safety net check screen on magisk? I try that kernel and some other kernels with different magisk versions, but I don't understand safety net checking status.
Click to expand...
Click to collapse
I want to use your guide but I'm busy to do current configuration of my phone. I delete some files on my system partition for gaining storage (I copied some new versions of upgraded apps to system partition) This take my time but I haven't got enough.
I use skymelon 9 kernel, with supersu. I guess because of supersu changed system partition and safetynet fails. I dislike supersu app but skymelon 9 comes with it. So I built skymelon 9 myself without supersu, but I didn't flash stock rom before installing skymelon 9 without-root and magisk. Now on my phone Magisk15 and skymelon9(compiled by me) installed. Magisk's hide function hiding itself from google apps and choosen apps but safetynet check fails.
Can you or anybody try this guide with skymelon 9 without-root which built by me?
View attachment 9-20171210-no-root.zip
Thanks
Hi osmank3,
I have tested the kernel that you built and it is working perfect. Thank you! This version has been added to the post and of course is menctioned your contribution.
I'm afraid you'll have to install a stock ROM...
BTW: I cannot get working Magisk v15. If I install it direclty from Magisk Manager the installation fails. If I install it through TWRP (and do wipes), the process is correct but when I check it, Magisk Manager not shows it as installed. So for the moment, it is only working for v14.5.
osmank3 said:
I want to use your guide but I'm busy to do current configuration of my phone. I delete some files on my system partition for gaining storage (I copied some new versions of upgraded apps to system partition) This take my time but I haven't got enough.
I use skymelon 9 kernel, with supersu. I guess because of supersu changed system partition and safetynet fails. I dislike supersu app but skymelon 9 comes with it. So I built skymelon 9 myself without supersu, but I didn't flash stock rom before installing skymelon 9 without-root and magisk. Now on my phone Magisk15 and skymelon9(compiled by me) installed. Magisk's hide function hiding itself from google apps and choosen apps but safetynet check fails.
Can you or anybody try this guide with skymelon 9 without-root which built by me?
View attachment 4371416
Thanks
Click to expand...
Click to collapse
GameBoy1989 said:
BTW: I cannot get working Magisk v15. If I install it direclty from Magisk Manager the installation fails. If I install it through TWRP (and do wipes), the process is correct but when I check it, Magisk Manager not shows it as installed. So for the moment, it is only working for v14.5.
Click to expand...
Click to collapse
I'm using magisk manager to patch boot.img with v15. I flash patched_boot.img with TWRP. It is working.
When I update it from v14.5 /data/magisk link crashing. I delete /data/magisk and upgrade on magisk manager as recommended type and reboot system, it is starting to work.
Ups! I forget to say. Check AVB 2.0/dm-verity
It works
Thank you very much. Post updated!
osmank3 said:
I'm using magisk manager to patch boot.img with v15. I flash patched_boot.img with TWRP. It is working.
When I update it from v14.5 /data/magisk link crashing. I delete /data/magisk and upgrade on magisk manager as recommended type and reboot system, it is starting to work.
Ups! I forget to say. Check AVB 2.0/dm-verity
Click to expand...
Click to collapse
Hey, i downloaded Magisk v14.5 and tried to flash it with twrp but i got error "invalid zip file format" What should i do now or what did i do wrong?
Yay i got this work but little bit different way.
1. Flashed stock rom with flashtool. I downloaded my stock rom from XperiFirm.
2. Flashed TWRP with this guide.
3. Flashed Skymelon 8.1 with TWRP and wiped Dalvik/Cache after install.
4. Flashed Magisk v14.0 with TWRP from this post and wiped Dalvik/Cache after install.
When that was done i rebooted and Magisk and Magick manager was installed. They aren't latest versions so i updated them.
1. Downloaded latest Magisk manager from here and installed it.
2. From Magisk manager i checked "Preserve AVB 2.0/dm-verity" and installed it with choosing the recommended option "Direct Install"
Everything seems to working fine and i did this to my E2303 with 26.3.A.1.33
Great! Thanks for sharing :good:
Which is the difference between methods? I see that it also works for you by flashing Magisk v14.0.
Artsii said:
Yay i got this work but little bit different way.
1. Flashed stock rom with flashtool. I downloaded my stock rom from XperiFirm.
2. Flashed TWRP with this guide.
3. Flashed Skymelon 8.1 with TWRP and wiped Dalvik/Cache after install.
4. Flashed Magisk v14.0 with TWRP from this post and wiped Dalvik/Cache after install.
When that was done i rebooted and Magisk and Magick manager was installed. They aren't latest versions so i updated them.
1. Downloaded latest Magisk manager from here and installed it.
2. From Magisk manager i checked "Preserve AVB 2.0/dm-verity" and installed it with choosing the recommended option "Direct Install"
Everything seems to working fine and i did this to my E2303 with 26.3.A.1.33
Click to expand...
Click to collapse
GameBoy1989 said:
- Flash Magisk v14.5 from TWRP. Wipe Dalvik/Cache after install it. GitHub repo: https://github.com/topjohnwu/Magisk/releases
Click to expand...
Click to collapse
This was only thing i made differently. I didn't find right magisk there what would work when flashing because i had problem with "invalid zip file format" so i downloaded that magisk zip file from another place.
This worked fine for me but I directly tried flashing/installing latest version (15.1) from TWRP and later after booting via adb the .apk of the Manager.
Didn't show the Magisk as installed.
With making a backup in TWRP of the boot (just renaming it to .img it has a different extension in the name) and then modifying it (as Manager tells you when you want to install) I could make it work (flashing the modified boot image with fastboot).
(Other steps like flashing the stock ROM and the recovery worked as usual. Also no problems with installing the kernel in TWRP.)
If you try to flash directly the last Magisk version (v15.1 in this case) I don´t know why yet but it doesn´t work. For that reason it is neccesary to first flash Magisk v14.5 (last version working with TWRP).
The way that you do it is also a very good one! Thanks for sharing @lordmd.
lordmd said:
This worked fine for me but I directly tried flashing/installing latest version (15.1) from TWRP and later after booting via adb the .apk of the Manager.
Didn't show the Magisk as installed.
With making a backup in TWRP of the boot (just renaming it to .img it has a different extension in the name) and then modifying it (as Manager tells you when you want to install) I could make it work (flashing the modified boot image with fastboot).
(Other steps like flashing the stock ROM and the recovery worked as usual. Also no problems with installing the kernel in TWRP.)
Click to expand...
Click to collapse
After magisk 14.6+ there is a problem about dm-verity. Magisk can't patch it, so we must preserve the original dm-verity. When you are applying magisk 14.6+ from twrp, you can't preserve and magisk can't patch it. The true way is using magisk manager and patch with preserve dm-verity.
Magisk 15.2 version notes says that problem solved but I try it, it is not solved yet.
My first applying procedure is:
First, patch skymelon 9 boot.img file with new magisk version also with preserve dm-verity on Magisk Manager,
Flash recovery and open with twrp
Apply skymelon 9 wipe dalvik and cache
Apply new magisk
Flash patched img
Let´s see if the next v15.3 beta finally works. Thanks @osmank3
BTW: Did you finally install the stock ROM or could you unroot your CFW for installing Magisk?
osmank3 said:
After magisk 14.6+ there is a problem about dm-verity. Magisk can't patch it, so we must preserve the original dm-verity. When you are applying magisk 14.6+ from twrp, you can't preserve and magisk can't patch it. The true way is using magisk manager and patch with preserve dm-verity.
Magisk 15.2 version notes says that problem solved but I try it, it is not solved yet.
My first applying procedure is:
First, patch skymelon 9 boot.img file with new magisk version also with preserve dm-verity on Magisk Manager,
Flash recovery and open with twrp
Apply skymelon 9 wipe dalvik and cache
Apply new magisk
Flash patched img
Click to expand...
Click to collapse
GameBoy1989 said:
Let´s see if the next v15.3 beta finally works. Thanks @osmank3
BTW: Did you finally install the stock ROM or could you unroot your CFW for installing Magisk?
Click to expand...
Click to collapse
I must flash system partition from stock Rom, after that safetynet passed.
Ty
Is pexorom better than stock. Is this going to work on pexorom.
Please reply
I´ve tried with Pexo Rom v3 and systemless root works with Magisk but it does not passed Safety Net check.
Sayan Qadri said:
Is pexorom better than stock. Is this going to work on pexorom.
Please reply
Click to expand...
Click to collapse
It seems it is impossible to get root with magisk on latest Oreo stock. Maybe someone found solution?
I asked and I answer =)
To get the root it is required to
- install latest TWRP (current version twrp-3.2.1-0)
- reboot to TWRP
- install 16.2 or higher magisk, link for 16.2
- install f2fs bug workaround
- reboot system
- install magisk Manager
- enjoy your root =)
dolar4ik said:
I asked and I answer =)
To get the root it is required to
- install latest TWRP (current version twrp-3.2.1-0)
- reboot to TWRP
- install 16.2 or higher magisk, link for 16.2
- install f2fs bug workaround
- reboot system
- install magisk Manager
- enjoy your root =)
Click to expand...
Click to collapse
its not work for me:crying:
Try to follow this guide then: https://forum.xda-developers.com/moto-z-play/how-to/guide-how-to-magisk-root-xposed-oreo-8-t3743273
But use latest magisk beta instead of suggested 15.3.
And keep in mind that it is possible to easily restore working state with magisk uninstaller.
Do you have any errors during magisk or workaround installation in twrp console?
dolar4ik said:
Try to follow this guide then: https://forum.xda-developers.com/moto-z-play/how-to/guide-how-to-magisk-root-xposed-oreo-8-t3743273
But use latest magisk beta instead of suggested 15.3.
And keep in mind that it is possible to easily restore working state with magisk uninstaller.
Do you have any errors during magisk or workaround installation in twrp console?
Click to expand...
Click to collapse
now its working for me.:highfive::highfive:
dolar4ik said:
I asked and I answer =)
To get the root it is required to
- install latest TWRP (current version twrp-3.2.1-0)
- reboot to TWRP
- install 16.2 or higher magisk, link for 16.2
- install f2fs bug workaround
- reboot system
- install magisk Manager
- enjoy your root =)
Click to expand...
Click to collapse
Hi, does not work for me, stuck at bootloader logo, tried Magisk, followed the steps many times but nothing, can you help please ?
evnimaster said:
Hi, does not work for me, stuck at bootloader logo, tried Magisk, followed the steps many times but nothing, can you help please ?
Click to expand...
Click to collapse
follow this: https://forum.xda-developers.com/mot...reo-8-t3743273
Code:
echo keepverity=true>>/data/.magisk
echo keepforceencrypt=true>>/data/.magisk
Is there a way to remove encryption already?
Remove root?
Is it possible to remove root and the TWRP without hard reset? Does anyone already have the original recovery of Oreo?
DavidKalil10 said:
Is it possible to remove root and the TWRP without hard reset? Does anyone already have the original recovery of Oreo?
Click to expand...
Click to collapse
There is magisk uninstaller provided in official thread.
To remove twrp you just need to flush original recovery via fastboot
Hello guys, can I have some advice on whether I should install this latest Oreo update on my moto z, how is the battery doing on this update? And overall experience?
@dolar4ik
i reflash the stock oreo ROM,then flash TWRP,flash magisk,flash f2fs bug workaround, stuck at bootloader logo,how can i do it??
Flash the Magisk uninstaller, reboot to recovery (you have this option in TWRP) and flash again only the Magisk 16.3 (without the f2fs bug workaround). This worked for me two days ago.
Today I updated to the latest Magisk 16.4 without any problems.
lesbianu said:
Flash the Magisk uninstaller, reboot to recovery (you have this option in TWRP) and flash again only the Magisk 16.3 (without the f2fs bug workaround). This worked for me two days ago.
Today I updated to the latest Magisk 16.4 without any problems.
Click to expand...
Click to collapse
still not work for me.:crying::crying:
---------- Post added at 03:12 AM ---------- Previous post was at 02:58 AM ----------
This is strange. It works on Oreo OTA but it does not work in full flash Oreo ROM.
have anyone help me??
rakee said:
It works on Oreo OTA but it does not work in full flash Oreo ROM.
Click to expand...
Click to collapse
This is right.
I re-flashed my phone using the OPL27.76-51 firmware. Now, no way to install Magisk (old, new, any version).
The solution, I restored a TWRP backup made at the first bootloader unlock (when the ROM was updated only using OTAs, not flashed). Immediately I was able to install Magisk 16.4 - without any F2FS workaround.
HERE is my TWRP backup containing the partitions: Boot, Data & System. Hope it helps!
rakee said:
@dolar4ik
i reflash the stock oreo ROM,then flash TWRP,flash magisk,flash f2fs bug workaround, stuck at bootloader logo,how can i do it??
Click to expand...
Click to collapse
Uninstall magisk with it's own uninstaller.
I installed Magisk on the full Oreo release and everything is working.
I did make a "less bloat, less bs" zip version but I doubt it would make a change.
If you guys want, I can upload it when I get home.
The Marionette said:
I installed Magisk on the full Oreo release and everything is working.
I did make a "less bloat, less bs" zip version but I doubt it would make a change.
If you guys want, I can upload it when I get home.
Click to expand...
Click to collapse
Could you provide your twrp ZIP Version? That would be great.
lesbianu said:
This is right.
I re-flashed my phone using the OPL27.76-51 firmware. Now, no way to install Magisk (old, new, any version).
The solution, I restored a TWRP backup made at the first bootloader unlock (when the ROM was updated only using OTAs, not flashed). Immediately I was able to install Magisk 16.4 - without any F2FS workaround.
HERE is my TWRP backup containing the partitions: Boot, Data & System. Hope it helps!
Click to expand...
Click to collapse
Just got myself a hand me down Moto z.
My friend who gave it to me hasn't touch the phone for a year.
So i started with 6.0 and after multiple updates, now i am on Oreo.
Since i have done ota from Marshmallow, would this method work?
Bootloader was never unlocked.
thanks for any input
Hello Everybody,
I have so following problem with data encrypted in twrp:
I installed latest version of twrp
! Used MIUI 10 developer version and data was encrypted according Twrp (according to settings device is not encrypted.
To flash no new OS from Twrp I had to format all data.
After that I installed second latest (08.11) Pixel Experience and Magical latest version.
I rebooted system.
! No Twrp and magisk APK installed.
Manually installed Twrp and magisk APK
I can install adaway also (superuser is installed)
Problem:
System mentioned that there is a new version of Pixel experience (15.11) and I wanted to install it. But it didn't work -> Twrp stopped installation, because data is still encrypted.
To install latest version I formated everything again and did above steps. But again with same result... I can install everything (manually) and everything works without to install new versions of Pixel Experience or anything else from Twrp recovery.
I tried to encrypt my phone over settings, but after encryption the system freezes after putting in pin code at the start. In twrp recovery I have to put in the code too, but again encryption is still available...
I have no further idea. Could you help me? Don't want to loose all data Everytime an update appears
Magisk "force encryption" manually enabled. The other setting is not enabled.
Thank you very much for your help!!!!!
StephanWiD said:
Hello Everybody,
I have so following problem with data encrypted in twrp:
I installed latest version of twrp
! Used MIUI 10 developer version and data was encrypted according Twrp (according to settings device is not encrypted.
To flash no new OS from Twrp I had to format all data.
After that I installed second latest (08.11) Pixel Experience and Magical latest version.
I rebooted system.
! No Twrp and magisk APK installed.
Manually installed Twrp and magisk APK
I can install adaway also (superuser is installed)
Problem:
System mentioned that there is a new version of Pixel experience (15.11) and I wanted to install it. But it didn't work -> Twrp stopped installation, because data is still encrypted.
To install latest version I formated everything again and did above steps. But again with same result... I can install everything (manually) and everything works without to install new versions of Pixel Experience or anything else from Twrp recovery.
I tried to encrypt my phone over settings, but after encryption the system freezes after putting in pin code at the start. In twrp recovery I have to put in the code too, but again encryption is still available...
I have no further idea. Could you help me? Don't want to loose all data Everytime an update appears
Magisk "force encryption" manually enabled. The other setting is not enabled.
Thank you very much for your help!!!!!
Click to expand...
Click to collapse
use this treble support twrp https://androidfilehost.com/?fid=746010030569971854
What is it good for? Don't have to wipe storage first or can I install it from the Twrp app? Can I flash other Twrp versions later?
But the most important: thank you for helping me
Screenshot please...i think i might have g had same problem..i think i can help..
StephanWiD said:
What is it good for? Don't have to wipe storage first or can I install it from the Twrp app? Can I flash other Twrp versions later?
But the most important: thank you for helping me
Click to expand...
Click to collapse
yes you can flash other twrp later ,,,, i have also latest twrp with treble support i can upload it if u want.
u can flash the above twrp via fastboot or you can flash the latest version
http://www.mediafire.com/file/a2m1jx502qijnbg/twrp-3.2.3-1-vince-treble.img/file
Thank you!!!! It took me 4 complete reinstallations before it worked for me now I have access to data in twrp !!! Thank you again!!! Thank you :good::good::fingers-crossed::fingers-crossed:
StephanWiD said:
Thank you!!!! It took me 4 complete reinstallations before it worked for me now I have access to data in twrp !!! Thank you again!!! Thank you :good::good::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
happy to help
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
fajniejest said:
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
Click to expand...
Click to collapse
You have an old version of TWRP... You need to install a newer version - 3.2.3.2 - which you will find by doing a search for it here on XDA...
Just load img file on INTERNAL storage of phone, choose install>install image file> and click on recovery partition. After install go to home menu and restart recovery...
If you still have issues then download magisk again, it may be corrupt...
Cheers....
ultramag69 said:
You have an old version of TWRP... You need to install a newer version - 3.2.3.2 - which you will find by doing a search for it here on XDA...
Just load img file on INTERNAL storage of phone, choose install>install image file> and click on recovery partition. After install go to home menu and restart recovery...
If you still have issues then download magisk again, it may be corrupt...
Cheers....
Click to expand...
Click to collapse
First of all, I'm not going to install TWRP - I want only to boot into TWRP once for flashing Magisk's ZIP.
Second - in this guide OP says that Unofficial TWRP should be used. I've tried v1 and v2 TWRP from the guide. So which other TWRP should I try to boot into? This? https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-x-t3836241
fajniejest said:
First of all, I'm not going to install TWRP - I want only to boot into TWRP once for flashing Magisk's ZIP.
Second - in this guide OP says that Unofficial TWRP should be used. I've tried v1 and v2 TWRP from the guide. So which other TWRP should I try to boot into? This? https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-x-t3836241
Click to expand...
Click to collapse
I am new on this forum (pocophone) and i seee how messed up it is. You should definitly use official twrp
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
fajniejest said:
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
Click to expand...
Click to collapse
what are you trying to flash? If it is Magisk Manager, it is in apk format and you just click it to install. No TWRP.
If it is Magisk, which version are you trying to flash? Try 18.1. And preferably download any file from its source.
EDIT: If Magisk v18.1 is also not flashing, try Magisk Canary version. Some phones need that.
tnsmani said:
what are you trying to flash? If it is Magisk Manager, it is in apk format and you just click it to install. No TWRP.
If it is Magisk, which version are you trying to flash? Try 18.1. And preferably download any file from its source.
EDIT: If Magisk v18.1 is also not flashing, try Magisk Canary version. Some phones need that.
Click to expand...
Click to collapse
I'm trying to flash zip with Magisk Manager, as it is said in guide. I know that I can have an apk, but is it enough to just install apk without having custom recovery (but having bootloader unlocked)?
GrecoNeoV said:
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
Click to expand...
Click to collapse
I will try it if nothing from "my" guide will work, because I really don't want to lose my storage (I see that in this guide installing Magisk needs it)
fajniejest said:
I'm trying to flash zip with Magisk Manager, as it is said in guide. I know that I can have an apk, but is it enough to just install apk without having custom recovery (but having bootloader unlocked)?
I will try it if nothing from "my" guide will work, because I really don't want to lose my storage (I see that in this guide installing Magisk needs it)
Click to expand...
Click to collapse
Well Here is how i managed it to work. After i unlocked my bootloader i launched twrp and flashed beta magisk 19.0 (not latest anymore because 19.1 just today showed up) then i reminded that i forgot about DisableForceEncryption_Treble_v18.0.zip so i flashed iit and after it flashed again magisk 19.0, after reboot it everything was fine
GrecoNeoV said:
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
Click to expand...
Click to collapse
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'fastboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
guhvanoh said:
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'flashboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
Click to expand...
Click to collapse
The command is 'fastboot boot twrp-<version>.img'
tnsmani said:
The command is 'fastboot boot twrp-<version>.img'
Click to expand...
Click to collapse
Thanks for the correction. I really don't know where I got flashboot from.
Cheers!
guhvanoh said:
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'fastboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
Click to expand...
Click to collapse
So, to make it clear (and to not brick my poco... ):
1. I should use TWRP image from this link --> https://twrp.me/xiaomi/xiaomipocophonef1.html...
2. ...and I don't need to replace my recovery - just booting it once (as You described) is enough.
3. I should flash Magisk's ZIP, not MagiskManager's ZIP or Magisk.apk
4. No more flashing, clearing data and other operations needed.
Am I right?
1 - Yes.
2 - That's down to you. I have TWRP recovery installed and I have the app as well.
3 - You need to flash Magisk and install the apk. See this link for instructions on installing Magisk.
4 - Yes, you need to clear data, wipe dalvik and cache when installing a new ROM. If updating a current rom, I just wipe dalvik & cache.
HTH
Hey I know its not a thread related but if u install magisk can u tell me if you have 60fps screen recoding option? Because I already Dirty flashed rom once and nothing changed still cant unlock it :/
guhvanoh said:
1 - Yes.
2 - That's down to you. I have TWRP recovery installed and I have the app as well.
3 - You need to flash Magisk and install the apk. See this link for instructions on installing Magisk.
4 - Yes, you need to clear data, wipe dalvik and cache when installing a new ROM. If updating a current rom, I just wipe dalvik & cache.
HTH
Click to expand...
Click to collapse
Big thanks! Finally dealt with it. So grateful for Your help. :victory:
Dearminder said:
Hey I know its not a thread related but if u install magisk can u tell me if you have 60fps screen recoding option? Because I already Dirty flashed rom once and nothing changed still cant unlock it :/
Click to expand...
Click to collapse
Yes, I do. I've not tried it though...
Good evening dear members, I ask for your kind advice, as I have done something wrong to my Oneplus 5t.
I upgraded my Oneplus 5t with "lineage for microG" 19.1 (from lineage 18).
I had installed TWRP 3.5.0_9 (phone encrypted).
It booted fine the first time into system.
The problem arose after I tried to install Magisk 21.4 from TWRP.
Now the phone only boots in recovery, but it doesn't enter TWRP's menu. It stays on the first TWRP screen (where it shows the version number).
The good thing (I hope) is that I can enter fastboot mode.
I tried flashing TWRP again from fastboot to no avail.
I tried flashing boot.img from fastboot (taken from the original firmware), but still no luck.
Is there a way to install the original firmware from fastboot?
I think starting from scratch would be a step into the right direction.
Please give any suggestion which I fill follow to the letter.
Thank you, thank you, thank you!
You have to be decrypted or flash DMverity for A12. I assume You mean Magisk 24.1 the current version is 24.3
Hi. This is what I did:
I downloaded and installed original firmware through fastboot (fastboot was still on).
I also installed original recovery through fastboot.
After that my oneplus 5t was in stock condition, apart from the bootloader, which was unlocked.
After that I managed to install TWRP through fastboot, and then lineage 19.
The thing is that TWRP doesn't support lineage 19, for one reason or another. Or it could be the other way around (lineage 19 doesn't support TWRP). In any case I had a phone which would only go in fastboot mode.
At least I knew what to do, as I did it already: reinstall stock firmware and recovery.
Long story short, I installed LOS recovery and lineage 19, and everything works fine.
Thanks everyone, and especially thaidroid, for the support.
Have a nice day.
miclombardo said:
Good evening dear members, I ask for your kind advice, as I have done something wrong to my Oneplus 5t.
I upgraded my Oneplus 5t with "lineage for microG" 19.1 (from lineage 18).
I had installed TWRP 3.5.0_9 (phone encrypted).
It booted fine the first time into system.
The problem arose after I tried to install Magisk 21.4 from TWRP.
Now the phone only boots in recovery, but it doesn't enter TWRP's menu. It stays on the first TWRP screen (where it shows the version number).
The good thing (I hope) is that I can enter fastboot mode.
I tried flashing TWRP again from fastboot to no avail.
I tried flashing boot.img from fastboot (taken from the original firmware), but still no luck.
Is there a way to install the original firmware from fastboot?
I think starting from scratch would be a step into the right direction.
Please give any suggestion which I fill follow to the letter.
Thank you, thank you, thank you!
Click to expand...
Click to collapse
Its not working cus you need to format data in recovery and then reboot it.
kirknado18 said:
Its not working cus you need to format data in recovery and then reboot it.
Click to expand...
Click to collapse
It wont boot cus your encrypted formatting data will allow op5t to boot.
latest lineage + magisk = stuck on boot logo, I tried an older version of lineage + magisk (known to work), same thing.. what did I do?
paradoxiumwind said:
latest lineage + magisk = stuck on boot logo, I tried an older version of lineage + magisk (known to work), same thing.. what did I do?
Click to expand...
Click to collapse
What recovery are you on? TWRP?
I use the one posted alongside each version: https://download.lineageos.org/dumpling
can you help?
I need to root so I can titanium backup everything. but I can't root. I suspect I might need to fully format and wipe and start again, I tried wiping data and doing a fresh install, but after sideloading magisk it just fails to boot every time now.
Does it boot regularly BEFORE installing magisk? I am trying to define the source of the problem.
I have installed lineage 19 and magisk, and I confirm you that it's possible
Yes. It boots fine if I just install lineage then nevermindthegapps. problem only occurs if I flash magisk. I tried installing the .apk and patching the .boot image manually in it and then fastboot flashing that, but same thing.
oh - one possible thing that it may be - is that I had a couple of modules loaded (I think a gcam fix mod and something similar) in magisk, and I read somewhere about people having them stuck 'installed' despite demoving all traces of magisk app. whether that is the problem I don't know.
This is very strange. That's what I did:
Sideload lineage recovery
Sideload lineage 19
Download magisk apk
Patched boot image from lineage 19.zip
Sideload the patched boot image
And that's it it all worked
May I suggest you to start all over again?
is wiping system data sufficient or do I need to format it? I'd rather not lose my appdata- but I can't rescue it without root / titanium backup :/
Try first without formatting, and see how it goes
I wiped system/cache, installed lineage-19.1-20220719-nightly-dumpling-signed.zip / mindthegapps, phone booted up fine - rebooted fine.
ok, good. Now download latest magisk app and patch the boot img.
do I click patch vbmeta in image?
Yes.
First extract the file called boot.img from lineage.zip you just installed.
Then in magisk select "patch vbmeta in image".
Magisk should produce a file named something like " magisk_pached-24300_f41h3.img".
That patched file should be sideloaded.
Installation is explained really well by topjohnwu
it wouldn't flash without selecting vbmeta, so tried with, flashed it, now i'm sitting looking at the boot logo.