Joyuse FM-Radio - no sound? - Redmi Note 9S / Note 9 Pro (Indian Model) Question

Hi there!
I have a Xiaomi Note 9 Pro = Joyuse device, with unlocked bootloader.
I've tried those two ROMs:
* Arrow-v12.1-miatoll-OFFICIAL-20220505-GAPPS (=Android 12)
* lineage-18.1-20220506-nightly-miatoll-signed (=Android 11)
Both include an FM-Radio app, with both I can scan and find channels, and get those RDS texts displayed for the stations that send them, but I can't hear any audio. I've also tried the recording feature: The resulting audio files contain only silence.
I also have a Xiaomi Note 9S = Curtana device, on this the FM-Radio works without a problem with all ROMs I've tried that included an app for it.
Does anybody else have a Joyuse device for which the FM Radio is working? Does it work with MIUI / Stock ROM?
Thank you!

Yes,
using same ROM (lineage-18.1-20220506-nightly-miatoll-signed) with base MIUI ROM miui_JOYEUSEEEAGlobal_V12.5.8.0.RJZEUXM_0d0abb3576_11.0.
FM Radio is working as expected. Can't say for the MIUI ROm since i haven't used it.

oh, so maybe the issue is that the last original xiaomi MIUI ROM that was installed on my Joyuse was too old. I didn't know that was required for this device..?

So I've tried flashing fw_joyeuse_miui_JOYEUSEEEAGlobal_V12.5.8.0.RJZEUXM_0d0abb3576_11.0.zip from https://xiaomifirmwareupdater.com/firmware/joyeuse/
That didn't change the FM-Radio, still no sound, still scanning + RDS Texts working.

@MiATOr Can you confirm the path you went to get the FM Radio working on your Joyeuse device?
You said you used "base MIUI ROM" miui_JOYEUSEEEAGlobal_V12.5.8.0.RJZEUXM_0d0abb3576_11.0.
Did you flash the fastboot or recovery version of this?
https://xiaomifirmwareupdater.com/miui/joyeuse/stable/V12.5.8.0.RJZEUXM/
Not sure if this makes any difference.

Related

Cyanogenmod Redmi Note 3 SE

Hi.
So I have this weird problem...
1. Running CM 13.0 on my phone can't use Wi-fi..even with kate radios flashed.
2. Running CM 14.0 Wi-fi works, Sim works...but my microphone and speaker doesn't work while making a voice call. With headphones, works. I try "recorder" apps and mic is working...
On both Roms i flashed kate radio for cm 13 to get signal...
Thank you for your time.
ionutarbanasi said:
Hi.
So I have this weird problem...
1. Running CM 13.0 on my phone can't use Wi-fi..even with kate radios flashed.
2. Running CM 14.0 Wi-fi works, Sim works...but my microphone and speaker doesn't work while making a voice call. With headphones, works. I try "recorder" apps and mic is working...
On both Roms i flashed kate radio for cm 13 to get signal...
Thank you for your time.
Click to expand...
Click to collapse
Flash kate firmware for nougat
HTML:
https://www.androidfilehost.com/?fid=745425885120723771

[redmi 4 prime] Mic Doesn't Work After Replacing Display?

Hello,
i know its the redmi 3 forum, but since there is no redmi 4 forum i have to ask here
i have replaced my display because it was broken, but now if i want to call the partner doesn't hear me anymore.
If i create a voice mail in whatsapp for example its working without a problem. only in calls it doesn't work anymore. i have sound on videos etc too. only if i want to make a call it doesnt work.
I have double checked all cables and connectors and cant find the problem.
i tried China 8.1.3.0 without root, china 8.0.6.0 without root, global 8.1.2.0 with and without root and now the xiaomi.eu rom with root ofc.
i have also tried to add <device name =" SND_DEVICE_IN_VOICE_DMIC "acdb_id =" 100 "/>, but didnt change anything.
and i changed persist.audio.fluence.voicecall= true to false in system/build.prop
any idea?
thank you!
best regards
Holger

Mi dialer call recording

Hello, I get redmi 8a with google call, so it havnt call recordings.
Moreover I dont like google call.
Any easy way to Install miui calls? Or it need to unlock bootloader to flash new features.
I have the same issue with call recordings. Anyone knows how to fix this?
Only way i was able to do it was flashing miui globe custom rom, or the untouched china version (not sure if it was the European one but the global version have Google dialer)

crDroid 6.5 (Android 10) for Davinci available

Hello
here is a Android 10 release of crDroid 6.5 from 16.4.20 for download:
https://yadi.sk/d/TD-kDw6UvZbvoQ
I got it running on my Mi 9T, without any issues.
Even the fingerprint sensor works very fine, its my daily driver.
It has lots of customization options
It is official rom?
Can I flash it on indian k20
I dont think its official.
I am not the developer , but I am very happy with crDroid on my Davinci.
I tested very much other roms, every one had issues with something.
Mostly with the fingerprint sensor or the customization options.
With a backup from your previous system its worth a test
Is it smooth ROM like, for instance, Pixel Expirience? Does ANX Camera works in it? Which gapps do you use on this ROM?
does all functions works ok?
I didnt find anything what is not working.
Pixel Exp. is nothing for me, to less options. But yes, it runs smooth.
The battery life is amazing.
I use opengapps nano, because when pixel launcher is installed the orignal laucher has problems.
And the gcam port from urnyx works very fine. Havent anx cam installed yet.
Volte/vowifi working? And stupid question but does it ask for FP when double tapping a notification or just pin?
Used to use crDroid back in my Samy S2 days so interested to see how its come along.
videoseven said:
I dont think its official.
I am not the developer , but I am very happy with crDroid on my Davinci.
I tested very much other roms, every one had issues with something.
Mostly with the fingerprint sensor or the customization options.
With a backup from your previous system its worth a test
Click to expand...
Click to collapse
Then who is the developer !!!
I found the download with Google.
Dont know whos the dev.
Crdroid is my absolute favorite rom , hope there will be an official build on the crdroid page
@nikc0069
You can unlock with fingerprint or pattern.
How can I test Volte/vowifi ?
Volte is on per default, Wi-Fi calling can be enabled
Found the ROM on 4pda, the develop name is Razziell of that forum, this is the know bugs written on the post:
ANX camera not supported!
After making calls on the bt headset while playing music, you need to reconnect the headset / headphones, since the audio stops playing (the same applies to the GU)
It is better to write about the problems found in telegram (link in the profile) or in qms.
Click to expand...
Click to collapse
Installation instructions:
Requires an unlocked bootloader and the presence of TWRP.
Installed on any stock firmware based on 10 android.
!! The firmware contains its own vendor - you don’t need to install others and it is extremely undesirable !!
It is required to install firmware from global 10 version 11.0.4 / 5 or the latest Chinese dev!
Click to expand...
Click to collapse
If want more information look at his telegram channel
https://t.me/crdavinciunoff

[JOYEUSE] Bootloop when flashing old firmware

Hi guys! Long time reader first time writer here.
In going straight to the point: I was on EvoX 7.0 and wanted to change to Pixel Experience (both a13) so I updated firmware (I was in 12.5.7 fw and PE recommended 13.0.1). The rom was buggy, battery was performing poorly, and fingerprint wasn’t working so I decided to go back to EvoX. The thing is that after performing a clean flash of both the rom and the firmware, the phone got stuck in bootloop. It never passed the redmi logo. What’s strange is that it can boot with firmware 12.5.3 and 13.0.1, but performance is nowhere near how it performed originally with 12.5.7. I tried flashing 12.5.7 stock rom trough MiFlash, both without locking the bootloader and locking it, and then flashing the rom, but problem still persists. Now I’m stuck with roms or firmware I don’t like as it does not perform as I was used to.
I tried asking trough the telegram support groups but I only found 2 guys with the same problem and none of them solved it, so any help will be greatly appreciated.
have quit the same problem :=) i updated joyeuse A10 to A12(miui13) and i can't go back to A10(miui12) without bugs or lags, sound glitch ( i mean cant play any youtube or mp3 even a ringtone isn't working )
jean_fack said:
have quit the same problem :=) i updated joyeuse A10 to A12(miui13) and i can't go back to A10(miui12) without bugs or lags, sound glitch ( i mean cant play any youtube or mp3 even a ringtone isn't working )
Click to expand...
Click to collapse
did you find a way to solve it??
found rom joyeuse_id_global_images_V12.0.1.0.QJZMIXM_global based on android 10 that work without sound lags.
but it doesnt have phone call recordings as indonesia rom.. forget about indonesia rom.
the only indonesia rom i found working is joyeuse_id_global_images_V12.5.1.0.RJZIDXM based on android 11
or joyeuse_id_global_images_V13.0.4.0.SJZIDXM indonesia android 12 but no solution for mounting folders for now : ((
i use to have joyeuse_id_global_images_V12.0.5.0.QJZIDXM indonesia android 10 working fine on my phone with phone recordings and magisk mountfolder stuff like apps2sd working fine. but i updated it to android 12 miui13 now no way to get back to this rom without lags and glitch bug sound .. dunno why. i tried something like 10 android10 roms only 1 working ://.
the one i mentioned before
i just tryed joyeuse_id_global_images_V12.0.4.0.QJZIDXM indonesia rom Android 10 and i recommand it because apparently everything is working fine .. no lag bugs ...
TWRP-3.4.1B working fine
Root with magisk zygisk (module builtin busybox 1.0.3 // lsposed 1.8.5 // safetynetfix 2.3.1// shamiko 0.6.126 // cloudflaredns 2.7// openfonts 3.1.0 // systemless debloater 1.4.9 // bootloop saver 1.0.0 // app systemizer 17.4.1// audio misc 1.2.2))
foxmm modules manager 1.0.3 ok
f4ck droid f-Droid 1.14
Matrix Rain apk 1.3.4
customiuizer 3.2.1 apk
lucky patcher
foldermount working with apps2sd .
poweramp etc ...
evrything is cracked back to normal :=))))

Categories

Resources