Redmi 10c twrp - Android Q&A, Help & Troubleshooting

Hello,
Does anybody know a twrp or any other custom recovery and roms compatible with Redmi 10c? Please share including procedures..

Yes, im currently using it, you can't find this twrp elsewhere coz it's an unofficial version ported to Redmi 10C by this indonesian guy named FenFren, so big credits to him.
TWRP 3.6.1 Port | Redmi 10C/10 Power
Update: 10/06/22
By FenFren
Download Link https://bit.ly/Fog361Mtp
Ported from spes/spesn (twrp by dblenk9)
Changelogs :
• Fixed MTP
Im currently using EU ROM, and it's also ported by this indonesian guy (FenFren).
You can just join this telegram group if you need more info. {Mod edit: Link removed. Oswald Boelcke, Senior Moderator}

I tried it. sideload only works when a rom is installed. after wiping all partitions it cannot read internal memory.

Briant ogw said:
I tried it. sideload only works when a rom is installed. after wiping all partitions it cannot read internal memory.
Click to expand...
Click to collapse
What? Why are you wiping all partitions? I install magisk(25.1) with this twrp without any errors. You can only wipe partitions if you are going to install custom rom, please note that other than ported eu rom, there are no available custom rom for 10c yet, maybe soon, or after a few months

Briant ogw said:
I tried it. sideload only works when a rom is installed. after wiping all partitions it cannot read internal memory.
Click to expand...
Click to collapse
Base on my experience, you really can't read the internal storage if there are no rom installed, use sd card or otg instead lol

rdevzph said:
What? Why are you wiping all partitions? I install magisk(25.1) with this twrp without any errors. You can only wipe partitions if you are going to install custom rom, please note that other than ported eu rom, there are no available custom rom for 10c yet, maybe soon, or after a few months
Click to expand...
Click to collapse
Ha ha.. thanks for enlightening me.. i was wiping partitions to test various gsi's

Briant ogw said:
Ha ha.. thanks for enlightening me.. i was wiping partitions to test various gsi's
Click to expand...
Click to collapse
You can use fastboot to test GSIs also, as twrp don't work fully.
Have you recovered your device?

LR7875 said:
You can use fastboot to test GSIs also, as twrp don't work fully.
Have you recovered your device?
Click to expand...
Click to collapse
Yes. I always have to revert to stock rom before testing another one.. so which partition shlould i flash in fastboot? Super?,. And should i also flash stock vendor?

Briant ogw said:
Yes. I always have to revert to stock rom before testing another one.. so which partition shlould i flash in fastboot? Super?,. And should i also flash stock vendor?
Click to expand...
Click to collapse
Wait I forgot the dynamic partitions thing sorry. You can try system, system_a and system_b at your own risk though.
Can you flash the GSI without wiping system partition in twrp (just factory reset)?

Briant ogw said:
Hello,
Does anybody know a twrp or any other custom recovery and roms compatible with Redmi 10c? Please share including procedures..
Click to expand...
Click to collapse
Xiaomi EU - https://mega.nz/folder/Mp9XyRAT#pX94jMGiYPCJel5IAt2mQw
TWRP - https://drive.google.com/file/d/11M465d_J5axroEY2DYgkCo_cvfnmmKLL/view?usp=drivesdk
I attached the file with OF to this post
I also found the recovery installer for redmi 10c - https://drive.google.com/file/d/1-T5Xx8y3OxosfobpN0CR-T4nUcYYJqYw/view

erroor234 said:
Xiaomi EU - https://mega.nz/folder/Mp9XyRAT#pX94jMGiYPCJel5IAt2mQw
TWRP - https://drive.google.com/file/d/11M465d_J5axroEY2DYgkCo_cvfnmmKLL/view?usp=drivesdk
I attached the file with OF to this post
I also found the recovery installer for redmi 10c - https://drive.google.com/file/d/1-T5Xx8y3OxosfobpN0CR-T4nUcYYJqYw/view
Click to expand...
Click to collapse
Tried EU ROM (v13.0.8) in Redmi 10C but honestly it still have some bugs (minimal)
Bugs i found:
- Volume Slider is not optimized in landscape mode (not centered).
- YouTube: When you watch videos on full screen, you can't go back to portrait mode.
- Gesture Navigation is not fully optimized in some apps (you'll see tiny black screen below, kinda different from Global version)
I just go back to Global ROM, flash magisk, flash some modules, and customized my device a little bit

Briant ogw said:
Ha ha.. thanks for enlightening me.. i was wiping partitions to test various gsi's
Click to expand...
Click to collapse
My friend tried GSI on Redmi 10C but still have a lot of bugs, Audio bug, Ghost touch bug and Notification overlay bug, etc.
Im just waiting for stable custom rom, i'll just stay on Global version for now

rdevzph said:
My friend tried GSI on Redmi 10C but still have a lot of bugs, Audio bug, Ghost touch bug and Notification overlay bug, etc.
Im just waiting for stable custom rom, i'll just stay on Global version for now
Click to expand...
Click to collapse
Redmi 10C was released just 3-4 months ago. It will take a long time to wait for normal ROMs
It seems to me that MIUI global works very well, as for MIUI

erroor234 said:
Redmi 10C was released just 3-4 months ago. It will take a long time to wait for normal ROMs
It seems to me that MIUI global works very well, as for MIUI
Click to expand...
Click to collapse
Yeah, but in Redmi 10C i experienced random freezing for a few seconds, later it will show "System UI isn't responding", i think it's because of MIUI 13 is not fully optimized yet, luckily i have root, i already fixed that by flashing MemeUI Enhancer

Btw, do you guys know the default data partition for Redmi 10C? Is it f2fs or ext4? I just can't find any info about it lol
I'm currently using f2fs

rdevzph said:
Btw, do you guys know the default data partition for Redmi 10C? Is it f2fs or ext4? I just can't find any info about it lol
I'm currently using f2fs
Click to expand...
Click to collapse
it seems to me that f2fs, because xiaomi would not use the old ext4 in new devices with the UFS 2.2 memory standard

erroor234 said:
it seems to me that f2fs, because xiaomi would not use the old ext4 in new devices with the UFS 2.2 memory standard
Click to expand...
Click to collapse
Thanks bro, i also thought the same thing, i just want to confirm it, actually ext4 is also good and more safer and stable than f2fs, but i still prefer f2fs, i had no problem with it

erroor234 said:
Xiaomi UE - https://mega.nz/folder/Mp9XyRAT#pX94jMGiYPCJel5IAt2mQw
TWRP- https ://drive.google.com/file/d/11M465d_J5axroEY2DYgkCo_cvfnmmKLL/view?usp=drivesdk
Adjunté el archivo con OF a esta publicación.
También encontré el instalador de recuperación para redmi 10c: https://drive.google.com/file/d/1-T5Xx8y3OxosfobpN0CR-T4nUcYYJqYw/view
Click to expand...
Click to collapse
Saludos. ¿Algún tutorial para rootear con estas herramientas?

I found a tutorial on how to get root and TWRP recovery on our device
need an unlocked bootloader!!!
YouTube:

Attention!!!
Device "Fog" - without NFC
Device "Rain" - with NFC

Related

miui_MINote2_8.6.1_b364d59a57_8.0 (MIUI 10) BETA Version

miui_MINote2_8.6.1_b364d59a57_8.0 (MIUI 10) BETA Version
LANGUAGES: CHINESE / ENGLISH
I have it installed a day ago and at the moment it's going very well
Google installer v2.0 to install google play services
DOWNLOAD GOOGLE INSTALLER: https://www55.zippyshare.com/v/PNflCoDB/file.html
DOWNLOAD miui_MINote2_8.6.1_b364d59a57_8.0 (MIUI 10) BETA Version: https://bigota.d.miui.com/8.6.1/miui_MINote2_8.6.1_b364d59a57_8.0.zip
REGARDS
I know it is in beta stage so it has bugs, but do you think it can be used as a daily driver rom?
any screen shots, how performs, any major bugs, overall experience.
FontesR said:
I know it is in beta stage so it has bugs, but do you think it can be used as a daily driver rom?
Click to expand...
Click to collapse
Sipi1302 said:
any screen shots, how performs, any major bugs, overall experience.
Click to expand...
Click to collapse
Been using it for like 2-3 hours,working pretty solid till now without encountering any bug. Battery is a little off compared to xiaomi.eu but I guess maybe because it is the first charge cycle. I haven't done any gaming yet,so not sure about the heating situation. Camera also works fine.
so in short,Yes it is usable as a daily driver.
Based on the file name it's still Oreo 8.0 based right?
Pantherx12 said:
Based on the file name it's still Oreo 8.0 based right?
Click to expand...
Click to collapse
Yes......
Is OTA available if I do not have a beta account?
Can I install it with TWRP ?
Sent from my MI Note 2 using Tapatalk
Naxxÿ said:
Can I install it with TWRP ?
Sent from my MI Note 2 using Tapatalk
Click to expand...
Click to collapse
Yes.......
Before installing by twrp, disable device search and close your xiaomi account in the mobile, then restart in twrp and make full wipes included internal memory and format data, restart again in twrp and install
vcx77 said:
Yes.......
Before installing by twrp, disable device search and close your xiaomi account in the mobile, then restart in twrp and make full wipes included internal memory and format data, restart again in twrp and install
Click to expand...
Click to collapse
Thanks but I'm on lineage 15.1 atm so I guess I only need the wipes [emoji6]
Sent from my MI Note 2 using Tapatalk
After two days with it, no failure and smooth operation, very good battery and the perfect camera, no problem with any application, routed with magisk-v16.4 beta without problems
Is there a new bokeh mode in the camera?
mindenfrak said:
Is there a new bokeh mode in the camera?
Click to expand...
Click to collapse
No.
That's for phones that support bokeh mode by default.
Installed last night, all went smooth. The performance is stellar and every is working fine. Only issue I had was that somehow my TWRP recovery was overwritten by Xiaomi recovery.
Oh btw you don't need any Google installer APK you can just download the installer from the included Mi app store.
I will test out the rom today but I think I will restore my Lineage backup till the EU version is out....... the rom is great but there is way to much Chinese bloatware [emoji6]
Sent from my FDR-A03L using Tapatalk
Naxxÿ said:
Installed last night, all went smooth. The performance is stellar and every is working fine. Only issue I had was that somehow my TWRP recovery was overwritten by Xiaomi recovery.
Click to expand...
Click to collapse
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
alexmanu1 said:
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
Click to expand...
Click to collapse
To me this official MIUI does not overwrite me the twrp
This rom encrypted and
erased my phone?
vcx77 said:
To me this official MIUI does not overwrite me the twrp
Click to expand...
Click to collapse
Interesting haha . Normally it should've flashed you the MI Recovery. Are you using the official TWRP?
maxraf21 said:
This rom encrypted and
erased my phone?
Click to expand...
Click to collapse
That is what official MIUI does ...
Always have a backup of your stuff not in the phone.
I do not use the official twrp, I use this https://forum.xda-developers.com/mi-note-2/development/twrpscorpio3-2-1-1tools-6blue-t3798956
So that there are no problems if you are in MIUI make a backup and before putting the rom deactivate from the mobile the device search and the account of xiaomi
once done reboot in twrp and make full wipes internal memory included and format data (if it gives montage error restart twrp again and perform again full wipes and format data) restart in twrp again and install, should not give you any problem with encryption
I do it like that and have never given me problems
and I do not overwrite the twrp either
alexmanu1 said:
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
Click to expand...
Click to collapse
Yeh might be but i never installed official MIUI ROMs before this one. Anyway took me 30 sec to hook up ADB and then Fastboot flash TWRP back. I rooted with Magisk and now all is perfect might even stay on this if i can tweak a few things to my liking.

[ROM][Testing][PORT][P]Vivo Funtouch OS

Update 20180806:
There are many device-related bugs as we can see.
Different hardwares/softwares will cause different bugs on different devices, and there's probably no way to fix all of them just by modifying this port, but by porting it to devices respectively.
Anyone feel free to do it on your device and distribute your patches and ports based on this one.
Look into the P semi-GSI and system/vendor images from other P preview to get some idea.
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Vivo X21 so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Only working on Qualcomm fully-Trebled deivces.[/B]
Known Bugs:
Keymaster not fully working on some platforms.(Lockscreen password may broken)
Features likely broken:
Advanced settings,fingerprint,SMS sending,ime
Almost Working in all deivces:
Boot
VoLTE
WLAN
BT
...
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract FuntouchOS_P_port.7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore Funtouch OS /system with TWRP
4.flash patch zip
5.wipe data,flash fbe_disabler and Permissiver (from semiGSI thread) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
Credits:
Special thanks to @erfanoabdi
Vivo for ROM
Xiaomi for device
ChangeLog:
v3(20180729):IME Keyboard fixed.
Keymaster improved.
v2(20180727)ebloated /system to 2.8g
Major fixes about UI and vivo system services.
v1(20180727): Initial release.
Download
GDrive: https://drive.google.com/drive/folders/14RLFFu3mHDCdtOIzvH0IEDjZRZ_iZK_K?usp=sharing
BaiduNetdisk: https://pan.baidu.com/s/1KyzS0k_464BQSqOhQBjOQw pass: 8s5w
Older version:
v1:
ROM
https://drive.google.com/file/d/1WfcsihieEbFoypWxqW1K5DC-TOEFKDuk/view?usp=sharing
Patch
https://drive.google.com/file/d/1U58Cb42K0RgxoV9RXSC2boYqke6yPgm6/view?usp=sharing
ROM link is not working.
Hyapatia said:
ROM link is not working.
Click to expand...
Click to collapse
Me too
Download link updated!
fxsheep said:
Download link updated!
Click to expand...
Click to collapse
Ok I will try it,nice job:good:
SADLY MY SYSTEM 2.9GB
Redmi Note 4x
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Hyapatia said:
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Click to expand...
Click to collapse
My Xiaomi MI 6 ...
Okay...I'll release a debloated one later,need at least 3gb /system
fxsheep said:
My Xiaomi MI 6 ...
Click to expand...
Click to collapse
Yeah an exception cuz almost every device has 2.8-9-3gb system partition.
so big?
omarilzz said:
SADLY MY SYSTEM 2.9GB
Redmi Note 4x
Click to expand...
Click to collapse
me too:crying:
Hyapatia said:
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Click to expand...
Click to collapse
My LG V30 with 6.x GB before i took 512MB off for a vendor partition xD
AB ???
……
system 3.4g and my device is huawei……
Sent from my Honor V9 using XDA Labs
SGCMarkus said:
My LG V30 with 6.x GB before i took 512MB off for a vendor partition xD
Click to expand...
Click to collapse
Have tested lol
Damn, that shows how ridiculously bloated some of OEM Roms are...
(my 5t has 2.9gb system, and it's rather clean out of the box)
NOT working on devices with /system smaller than 3.7G.
Slim-down Brother! so, everyone can use, remove all app which is available in playstore.
Thanks
where is selinux_disabler??
onism said:
where is selinux_disabler??
Click to expand...
Click to collapse
Permissiver.zip from semi-GSI thread

Miui for LE PRO 3 ELITE (X722)

Hi guys, today I have a good news for le pro 3 elite users. We have MIUI 10 BETA!
Steps to install: DOES NOT NEED GAPPS!
First, remember your risks!
Let's go...
Download the rom, install the rom *WITH TWRP 3.2.2 *(wipe/format data, *OTG/PC) and here we have an issue: TWRP is broken! Now, go to https://forum.xda-developers.com/le-pro3/how-to/leeco-le-pro-3-root-t3476560 and put your X722 on Fastboot mode (NOTE* THE ROM IS WORKING, BUT MIUI BROKES TWRP) and make a flash on Minimal with le pro 3 connected on your PC. Now, put the original recovery from LEX722, reboot, put it on recovery mode (THE ORIGINAL RECOVERY ONLY), unmark the first option (chinese update) and mark the second option (wipe). Now reboot your phone and miui 10 will be installed correctly. To install the TWRP, just install like a any other rom.
Second way: Use 3.2.2 TWRP and install MIUI (does not need gaps) and done. If you have an issues with touch, just put any older version of twrp using fastboot method!
Tutorial em português: Use o twrp 3.2.2, dê format data, instale a rom (já vem gapps) e logo após isso, vai iniciar normalmente. Se você perder o touch no twrp, passe uma versão antiga no fastboot e reinicie o celular normalmente, após isso já vai estar instalado corretamente.
How to fix possible issues:
For DPI issues install root and install EASY DPI Changer to change dpi settings. Choose the best for you.
Waiting...
Mega: https://mega.nz/#!DhlX1IhA!uc0adwjPmwBzAwReWM5lmEx9J6oBZ-YmgJNd-_UwXuE
Mediafire: http://www.mediafire.com/file/57b0hpispswb8ux/Miui_for_x722.zip/file
Added camera2api addon, use it to GCAM work
Credits: http://4pda.ru/forum/index.php?showtopic=876414&st=6860#entry75667528
Prints: Miguel engster. Thanks man!
Sorry for my bad English.
Is everything working - any bugs?
Zupy1 said:
Is everything working - any bugs?
Click to expand...
Click to collapse
Minimal, but I don't know how many..
I have tried this ROM,for now I have several problems.The scroll in settings is very slow,Dolby Atmos does not work.I have to try it more time.
Thanks for the work.I like Miui.
tomgar said:
I have tried this ROM,for now I have several problems.The scroll in settings is very slow,Dolby Atmos does not work.I have to try it more time.
Thanks for the work.I like Miui.
Click to expand...
Click to collapse
Nothing until now for some users :/
MIUI 9 FOR X722 is available too: https://mega.nz/#!CxEQQYLJ!QsXuNAJEn6Hv75EpsLh0586yhQ1Oi70eLGyWyVlh-6E
Credits: http://4pda.ru/forum/index.php?showtopic=888741&st=980#entry70408824
Matheusvsp said:
MIUI 9 is available too: https://mega.nz/#!CxEQQYLJ!QsXuNAJEn6Hv75EpsLh0586yhQ1Oi70eLGyWyVlh-6E
Credits: http://4pda.ru/forum/index.php?showtopic=888741&st=980#entry70408824
Click to expand...
Click to collapse
For x722? have you tried? what TWRP do I need?
tomgar said:
For x722? have you tried? what TWRP do I need?
Click to expand...
Click to collapse
Use only 3.2.2 and you don't need to put original recovery
Matheusvsp said:
3.2.1-1 but have an issues with TWRP
Click to expand...
Click to collapse
What issue? Is the issue relationated with encriptation?.
tomgar said:
What issue? Is the issue relationated with encriptation?.
Click to expand...
Click to collapse
Yes! You need to put original recovery from leeco (like XIAOMI phones when install MIUI) and wipe to work.
Matheusvsp said:
Yes! You need to put original recovery from leeco (like XIAOMI phones when install MIUI) and wipe to work.
Click to expand...
Click to collapse
I don not have any issue with that because I should do format data then it does not have any problem.
tomgar said:
I don not have any issue with that because I should do format data then it does not have any problem.
Click to expand...
Click to collapse
Really? Just format data and install? X722?
Matheusvsp said:
Really? Just format data and install? X722?
Click to expand...
Click to collapse
Yes,when you do format data the encriptation is disabled.
tomgar said:
Yes,when you do format data the encriptation is disabled.
Click to expand...
Click to collapse
I know, but a friend tell me it does not work, so I don't know if it works..
Matheusvsp said:
I know, but a friend tell me it does not work, so I don't know if it works..
Click to expand...
Click to collapse
What does not work? the installation of MIUI 9 after of decrypt?
tomgar said:
What does not work? the installation of MIUI 9 after of decrypt?
Click to expand...
Click to collapse
Miui 10 beta. After Format data, will be encrypted anyways
Matheusvsp said:
Miui 10 beta. After Format data, will be encrypted anyways
Click to expand...
Click to collapse
No,it happens because normally people install the ROM after of Oreo but when you come of previous version,for example Nougat or Marsmallow it does not happen nothing.You only would install TWRP 3.2.2.
The installation of MIUI 9 get wrong the first time but you only should reboot to recovery mode and install again .
The problem of encryption maybe before you use 8.1 rom. To go back from 8.1 to 6.0 stock rom need to format data (lose all data on internal storage).
I think maybe same thing apply if you want to go back from 8.1 rom to 7.1 (in this case Miui 10 which based on 7.1 Android).
if the above is true it's not TWRP version issue but what I mentioned above is the problem.
Moon75 said:
The problem of encryption maybe before you use 8.1 rom. To go back from 8.1 to 6.0 stock rom need to format data (lose all data on internal storage).
I think maybe same thing apply if you want to go back from 8.1 rom to 7.1 (in this case Miui 10 which based on 7.1 Android).
if the above is true it's not TWRP version issue but what I mentioned above is the problem.
Click to expand...
Click to collapse
Yes all you say is true so you should format data always you have a problem with encryption.
Format data and use TWRP 3.2.2. IF YOU LOSE YOUR TOUCH ON TWRP, JUST PUT ON FASTBOOT AND PUT 3.2.1-1. MIUI CAN BE INSTALLED WITH 3.2.2 WITHOUT ORIGINAL RECOVERY.

[Guide] [Mi 8] How to flash Poco F1 ROMs

1. Download a Poco rom that you want
2. Open the zip on your PC or mobile
3. Navigate to "META-INF/com/google/android"
4. Open the update-script with a text editor
5. Then remove every line at the beginig that starts with "assert" (they are almost always the first three lines)
6. Save it
7. Flash the ROM and a custom kernel for our device and enjoy it
(optional)
8. Flash this Magisk module to set the right build props for our device
Tested ROMs
This is the best guide I found yet!
You can flash oxygen os too that way?
The power of the Mi 8 be with you
johnnyman25 said:
You can flash oxygen os too that way?
Click to expand...
Click to collapse
I have not tried it yet but it should work.
Until now every rom that I have tried is working.
Hi, this sounds great, but, can works on Polaris? MiMix2s
Hello, do the software updates work, or this should be repeated for every update and then manually installed?
catalindobre said:
Hello, do the software updates work, or this should be repeated for every update and then manually installed?
Click to expand...
Click to collapse
You have to repeat the steps when there is a update.
johnnyman25 said:
You can flash oxygen os too that way?
The power of the Mi 8 be with you
Click to expand...
Click to collapse
No I don't think this will work.
Mi8 and Poco has almost the same hardware. That's why it works. Oxygen is for OnePlus and it's not similar as Poco.
Kollachi said:
No I don't think this will work.
Mi8 and Poco has almost the same hardware. That's why it works. Oxygen is for OnePlus and it's not similar as Poco.
Click to expand...
Click to collapse
There is a Oxygen port for the Poco phone..
jigs4wkiller said:
There is a Oxygen port for the Poco phone..
Click to expand...
Click to collapse
Ah ok I didn't know that. Sry I just accidentally landed here. I'm usually active at OP6 Threads lol. ^^
Tested and good working ROMs:
Bootleggers
CrDroid
MSM Xtended
SuperiorOS
ViperOS
Please tell me wihch roms are working for you so I can add it.
so none of this roms support AOD right?
vinicioh23 said:
so none of this roms support AOD right?
Click to expand...
Click to collapse
Look at the specific rom thread to see if it has AOD
Sorry, then this rom also work on mi 8?thanks
QUOTE=jigs4wkiller;79226285]Tested and good working ROMs:
Bootleggers
CrDroid
MSM Xtended
SuperiorOS
ViperOS
Please tell me wihch roms are working for you so I can add it.[/QUOTE]
GianniRu said:
Sorry, then this rom also work on mi 8?thanks
Click to expand...
Click to collapse
Pretty much every poco rom works for our device when you follow my guide
Then also oxygenOs?thanks man
jigs4wkiller said:
Pretty much every poco rom works for our device when you follow my guide
Click to expand...
Click to collapse
GianniRu said:
Then also oxygenOs?thanks man
Click to expand...
Click to collapse
Personally I didn't tried it but it should work as well
Has anyone got the OxygenOS Poco Port to work on their Mi 8? I'm currently trying but it's not booting up.
This is what I've done:
-changed the OxygenOS update-script
-wiped data,cache,dalvik + system
-did factory reset
-flashed the rom (prepped OxygenOS)
-flashed Mi8 kernel
-flashed DFE
-flashed the vendor.img you need for OxygenOS
I see the Oxygen boot animation but after 5 mins of trying to boot my Mi 8 resets into recovery
Would really love an OxygenOS port for the Mi 8 so hmu if u got this to work
Marlonese said:
Has anyone got the OxygenOS Poco Port to work on their Mi 8? I'm currently trying but it's not booting up.
This is what I've done:
-changed the OxygenOS update-script
-wiped data,cache,dalvik + system
-did factory reset
-flashed the rom (prepped OxygenOS)
-flashed Mi8 kernel
-flashed DFE
-flashed the vendor.img you need for OxygenOS
I see the Oxygen boot animation but after 5 mins of trying to boot my Mi 8 resets into recovery
Would really love an OxygenOS port for the Mi 8 so hmu if u got this to work
Click to expand...
Click to collapse
Maybe flashing DFE again after vender.img helps
raminta said:
Maybe flashing DFE again after vender.img helps
Click to expand...
Click to collapse
Didn't work for me :/

[MOD][ROOT] Really Overclock your MIX3 screen to 66HZ in MIUI Android P (Tested)

Use it at your own risk! (Don't flash it on any Q ROMs)The dtbo.img is extracted from the Chinese version of miui 9.8.15,so you better use version 9.8.15 or later, If not worked you can try other rom. This Mod is tested and it worked for me,66hz is the most,more than 60hz will be slow because of the quality of the mix3 screen. this zip include 66hz for mix3
-Download the attached zip, unzip it
-Open TWRP
-Backup your dtbo partition
-Select the corresponding dtboxx.img,choose the dtbo partition,the flash it
-Reboot
You should see the changes immediately after the restart. It's way smoother than before.
If you want to go back to default, restore your dtbo partition backup or flash the dtbo60
https://drive.google.com/file/d/1Ri0f7ixSPEIblp8ZkckatBd7aXYUXGV6/view?usp=sharing
Join the telegram an get the new file and new phone screen oc:
https://t.me/LenScreenOC
Or add my QQ number to get support (always on line):1403727621
It works. Thanks.
I tried it on the latest EU weekly 9.8.15.
The 66 hz works perfectly the rest not so much, Laggy and slow.
Work perfectly on 66hz confirm here 9.8.15 eu
Is it gonna work in other roms like pixel experience (caf) ??
thx, works perfect with xiaomi.eu beta!
so I just want to make it clear, any ROM based on EU will still work?
like im on Mi-Globe right now, on 9.8.22
also, wheres the dtbo partition?
bluviper said:
so I just want to make it clear, any ROM based on EU will still work?
like im on Mi-Globe right now, on 9.8.22
also, wheres the dtbo partition?
Click to expand...
Click to collapse
Mi globe is based on eu so it will work
raven213 said:
Mi globe is based on eu so it will work
Click to expand...
Click to collapse
thanks man.
but, how do i backup dtb in twrp?
bluviper said:
thanks man.
but, how do i backup dtb in twrp?
Click to expand...
Click to collapse
Yes back up in twrp
raven213 said:
Yes back up in twrp
Click to expand...
Click to collapse
what menu? cant find dtbo?
is that boot.img?
bluviper said:
what menu? cant find dtbo?
is that boot.img?
Click to expand...
Click to collapse
Which twrp do you have?
raven213 said:
Which twrp do you have?
Click to expand...
Click to collapse
3-3-1-0
bluviper said:
3-3-1-0
Click to expand...
Click to collapse
Use 3.3.1-5
thanks. its working out
but during boot, my animation lags
but upon entering os, it all works well.
using 66. thanks man
bluviper said:
thanks. its working out
but during boot, my animation lags
but upon entering os, it all works well.
using 66. thanks man
Click to expand...
Click to collapse
No problem
I'm sorry for asking this.
Isn't our Mix 3 screen already at 60hz? Does it have significant difference between 60hz and 66hz?
Stupid question maybe but can this be used with a GSI Pie ROM (Arrow OS)?
Listy2021 said:
Stupid question maybe but can this be used with a GSI Pie ROM (Arrow OS)?
Click to expand...
Click to collapse
Not stupid lol so don't worry and it won't work on GSI only on stock
AMZMA said:
I'm sorry for asking this.
Isn't our Mix 3 screen already at 60hz? Does it have significant difference between 60hz and 66hz?
Click to expand...
Click to collapse
not Earth shattering but once you've done it right.
its pretty cool and you'll notice it after you enter the OS.
will also help if you tweak your system animations under developer options, make them a second or more.
Doesn't boot on pixel experience (pe plus)

Categories

Resources