Question TWRP Installation gets overwritten - OnePlus Nord 2 5G

Hello,
I'm trying to get a (permanent) TWRP installation on my OnePlus Nord 2. But after flashing the (latest official) TWRP image via fastboot to recovery I can enter it once if I press Power+VolDown directly during the reboot to recovery. But after the next reboot Power+VolDown starts the fastboot mode, Power+VolUp just boots the normal system and trying "adb reboot recovery" brings me to the standard recovery mode. For me it looks like the twrp image gets overwritten with the next reboot (something I found happens if you don't press Vol+PowerDown on your first restart after the installation but I did that [multiple tries]).
And when I try to directly boot the twrp image (without flashing it) it manages to send the file but fails on booting with "FAILED (Status read failed (No such device)). Same if I try with sudo.
Does anyone know what I am doing wrong or if it's a known bug I simply didn't find anything about?
Sincerely,
Sanaway

Hi, IIRC, right after flashing you have to boot into recovery using fastboot reboot recovery
Don't use the button combination, do it from the command line for the first boot (this should solve it if my memory serves me right)

Op_Flashpoint said:
Hi, IIRC, right after flashing you have to boot into recovery using fastboot reboot recovery
Don't use the button combination, do it from the command line for the first boot (this should solve it if my memory serves me right)
Click to expand...
Click to collapse
It works for the first boot (and if I reboot to recovery from TWRP again, even mutiply times) but as soon as I power off once and reboot normally it is gone again.

Sanaway said:
It works for the first boot (and if I reboot to recovery from TWRP again, even mutiply times) but as soon as I power off once and reboot normally it is gone again.
Click to expand...
Click to collapse
What exactly are you doing?
What you need to do is
1. Boot to fastboot
2. flash recovery fastboot flash recovery <recovery.img>
3. Once flashed, reboot to recovery, not system fastboot reboot recovery or fastboot boot <recovery.img>
I had this issue and if I boot to recovery it did not get overwritten

Op_Flashpoint said:
What exactly are you doing?
What you need to do is
1. Boot to fastboot
2. flash recovery fastboot flash recovery <recovery.img>
3. Once flashed, reboot to recovery, not system fastboot reboot recovery
I had this issue and if I boot to recovery it did not get overwritten
Click to expand...
Click to collapse
I did exactly that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And it works so far that I can access TWRP once. But as soon as I power down from TWRP it's gone.

Sanaway said:
I did exactly that.
View attachment 5640407
And it works so far that I can access TWRP once. But as soon as I power down from TWRP it's gone.
Click to expand...
Click to collapse
Strange, maybe after flashing try fastboot boot twrp.img ?

Op_Flashpoint said:
Strange, maybe after flashing try fastboot boot twrp.img ?
Click to expand...
Click to collapse
Sanaway said:
I did exactly that.
View attachment 5640407
And it works so far that I can access TWRP once. But as soon as I power down from TWRP it's gone.
Click to expand...
Click to collapse
Found this in another thread, maybe try this as well
For that when we reboot after typing
fastboot reboot recovery
Immediately press volume down+ power button till you saw the recovery name at the bottom om the phone screen and leave the phone it will boots to twrp that's it.

Already tried both. In the end if it doesn't work I'll just reflash it every time I need it. Annoying but nothing impossible.

Sanaway said:
Already tried both. In the end if it doesn't work I'll just reflash it every time I need it. Annoying but nothing impossible.
Click to expand...
Click to collapse
HI. I think you need to flash Magisk or what ever root you want to use at first boot to TWRP.
It makes TWRP to stick

jis251 said:
HI. I think you need to flash Magisk or what ever root you want to use at first boot to TWRP.
It makes TWRP to stick
Click to expand...
Click to collapse
After I rooted the phone TWRP sticks but I can't start it by key combination. But that shouldn't be too much of a problem.

Sanaway said:
After I rooted the phone TWRP sticks but I can't start it by key combination. But that shouldn't be too much of a problem.
Click to expand...
Click to collapse
OK. I hope you know that Nord 2 doesn't like to be rooted. It will be soft bricked max 2 weeks or so ( usually) so make good backup (TWRP backup is hard to restore if at all). So be prepared and learn how to recover.

As long as you root a CLEAN ROM (I've explained multiple times in various threats what that is - stock rom (re)installed by OP, than rebooted to stock recovery, whipe, re-flash stock by OP servicepoint) and rooting will be damn fine. Mine runs for 3 months stable as hell. But. If you do not do as above, the question is not IF you are getting troubles but WHEN.

Related

[Q] Lost root access

Hi!
I'n kinda new to XDA but anyway.. Im running CM7 and have a HTC Legend. Last week I was stupid enough and tried to update Superuser from Rom Manager and the result? Superuser wont open anymore.. It always force closes and I have lost my root access. I cant even get in to CWM
What am I going to do?
Please help me!
Easiest thing to do would do a restore from a nandroid backup. If you don't have one, then download a pre-rooted stock rom, or another rom. Hope this helps.
RQ7 said:
Hi!
I'n kinda new to XDA but anyway.. Im running CM7 and have a HTC Legend. Last week I was stupid enough and tried to update Superuser from Rom Manager and the result? Superuser wont open anymore.. It always force closes and I have lost my root access. I cant even get in to CWM
What am I going to do?
Please help me!
Click to expand...
Click to collapse
Simiply reboot into recovery, and reflash superuser. You can get it here: http://goo.im/superuser/Superuser-3.0.7-efghi-signed.zip.
Theonew said:
Simiply reboot into recovery, and reflash superuser. You can get it here: http://goo.im/superuser/Superuser-3.0.7-efghi-signed.zip.
Click to expand...
Click to collapse
How do I reboot into recovery ? Should I rename it update.zip or what?
Thnx for replies.
Press Power and selecPress down on the Trackball, hold Volume Down & the Power button until the device boots to the bootloader. Once in the bootloader, use Volume Down to select "recovery" and press the Power button and select reboot -recovery.
Or turn your phone off and:
Press down on the Trackball, hold Volume Down & the Power button until the device boots to the bootloader. Once in the bootloader, use Volume Down to select "recovery" and press the Power button to select.
Then you select install zip from sd and select the superuser zip.
i'm_ever_dreaming said:
Press Power and selecPress down on the Trackball, hold Volume Down & the Power button until the device boots to the bootloader. Once in the bootloader, use Volume Down to select "recovery" and press the Power button and select reboot -recovery.
Or turn your phone off and:
Press down on the Trackball, hold Volume Down & the Power button until the device boots to the bootloader. Once in the bootloader, use Volume Down to select "recovery" and press the Power button to select.
Then you select install zip from sd and select the superuser zip.
Click to expand...
Click to collapse
Thnx for helping but when im in this recovery, it only says " Apply SD Card: Update.zip " i cant choose Superuser
Can you take a photo?
i'm_ever_dreaming said:
Can you take a photo?
Click to expand...
Click to collapse
Here is a picture. This is as far as I can reach.. I cant choose Superuser, only update.zip..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I know a solution for LG phones but not for HTC, sorry.
You can flash(install) CWM in the bootloader, but i don't know how...
Edit: I'm not sure: Don't do it before someone says that this is correct.
I have no experience with fastboot, just with recovery etc.
You must go into the bootloader, connect your phone to the computer and open terminal, write
fastboot flash recovery (here you must write the name of the image, that must be on the computer in the same folder as fastboot[where you installed android sdk)
RQ7 said:
Here is a picture. This is as far as I can reach.. I cant choose Superuser, only update.zip..
Click to expand...
Click to collapse
Ok, that is the stock recovery. An easy way is to use this tool: http://forum.xda-developers.com/showthread.php?t=794638, flash CWM recovery, then boot into CWM recovery and flash superuser (you do not have to rename it).
Theonew said:
Ok, that is the stock recovery. An easy way is to use this tool: http://forum.xda-developers.com/showthread.php?t=794638, flash CWM recovery, then boot into CWM recovery and flash superuser (you do not have to rename it).
Click to expand...
Click to collapse
Does it work with HTC Legend?
Yes, i know, that this is stock...
Try it, install the tool and flash this image(attachment) if you could select your device.
Sorry, that was the wrong file - removed - now it's the right file
Theonew said:
Ok, that is the stock recovery. An easy way is to use this tool: http://forum.xda-developers.com/showthread.php?t=794638, flash CWM recovery, then boot into CWM recovery and flash superuser (you do not have to rename it).
Click to expand...
Click to collapse
I downloaded the tool but it wont open.. I tried on my Mac and XP but it wont open.. Always gives an error
Do you know how to work with adb?
Edit: Have you tried to root your phone again?
i'm_ever_dreaming said:
Do you know how to work with adb?
Edit: Have you tried to root your phone again?
Click to expand...
Click to collapse
I know how adb works but it's been a while so I think I dont remember it... I havent tried to root again cuz im to lazy for that
RQ7 said:
I downloaded the tool but it wont open.. I tried on my Mac and XP but it wont open.. Always gives an error
Click to expand...
Click to collapse
RQ7 said:
I know how adb works but it's been a while so I think I dont remember it... I havent tried to root again cuz im to lazy for that
Click to expand...
Click to collapse
Ok. Boot your device into fastboot. Then do:
Code:
fastboot flash recovery recovery.img
If you are using this exact command, make sure you rename the recovery to "recovery.img".
i'm_ever_dreaming said:
You must go into fastboot, connect your phone to the computer and open terminal, write
fastboot flash recovery (here you must write the name of the image(recovery-clockwork-5.0.2.0-legend.img, that must be on the computer in the same folder as fastboot[where you installed android sdk)
Click to expand...
Click to collapse
This is the same...
i'm_ever_dreaming said:
This is the same...
Click to expand...
Click to collapse
You said "bootloader" but he needs to boot into "fastboot".
i'm_ever_dreaming said:
This is the same...
Click to expand...
Click to collapse
Theonew said:
You said "bootloader" but he needs to boot into "fastboot".
Click to expand...
Click to collapse
Hi again and thnak you for helping me out. I have one little problem left then its all solved... when im in terminal, it says " error: cannot load "recovery.img" .. what am i supposed to do
fastboot flash recovery recovery-clockwork-5.0.2.0-legend.img
Click to expand...
Click to collapse
You must write "the name of the image.img" instead of recovery.img
Or you have to rename it.

[Q] Problem with flashing rom.

Hey im new to all this but i wanted to have the pure Android on my one x+.
I have rooted the phone etc etc and i went to install this kernal and rom: http://forum.xda-developers.com/showthread.php?t=2057920
After the reboot it just gets stuck on a screen saying "INITIATING SWAGGER" as shown below. I have no idea what to do from here how to restore it or install a working rom?
Picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance for the help
Still not working, help please??? :/
LynchyY said:
Still not working, help please??? :/
Click to expand...
Click to collapse
You need to flash Gapps (20121212) as well.
Or you can wrote down your step, then more easier to known your problem.
xdacalvien said:
You need to flash Gapps (20121212) as well.
Or you can wrote down your step, then more easier to known your problem.
Click to expand...
Click to collapse
I am on the screen at the moment saying "Android is upgrading..." "Starting apps."
It has been on this screen now for about half an hour.
I have flashed gapps already although i may have done the wrong one but how can i get the one you just linked me onto my phone when its not even booting properly?
Thanks.
LynchyY said:
I am on the screen at the moment saying "Android is upgrading..." "Starting apps."
It has been on this screen now for about half an hour.
I have flashed gapps already although i may have done the wrong one but how can i get the one you just linked me onto my phone when its not even booting properly?
Thanks.
Click to expand...
Click to collapse
You need to go back the Recovery mode and flash the gapps..
Turn off your phone, Hold down the Volume Key (-) and press Power button to boot into bootloader.
This is quick step for you:
Installation:
install kernel
full wipe
flash rom
flash gapps
reboot into rom
[HOW TO] Unlock bootloader, Root, Flash Custom ROM, Flash Kernel
xdacalvien said:
You need to go back the Recovery mode and flash the gapps..
Turn off your phone, Hold down the Volume Key (-) and press Power button to boot into bootloader.
This is quick step for you:
Installation:
install kernel
full wipe
flash rom
flash gapps
reboot into rom
[HOW TO] Unlock bootloader, Root, Flash Custom ROM, Flash Kernel
Click to expand...
Click to collapse
Hey, thanks for the reply, can you give me a link to where i can find/download the kernel i need to flash?
Thanks
LynchyY said:
Hey, thanks for the reply, can you give me a link to where i can find/download the kernel i need to flash?
Thanks
Click to expand...
Click to collapse
Your need to go back ur ROM.zip file, and extract the boot.img. That is your boot.img... Any ROM got own boot.img.
So you not flash yet your BOOT.IMG.
xdacalvien said:
Your need to go back ur ROM.zip file, and extract the boot.img. That is your boot.img... Any ROM got own boot.img.
So you not flash yet your BOOT.IMG.
Click to expand...
Click to collapse
Yes but how do I install the kernel? what kernel do i install?
LynchyY said:
Yes but how do I install the kernel? what kernel do i install?
Click to expand...
Click to collapse
The Kernel here is means boot.img.
LynchyY said:
Yes but how do I install the kernel? what kernel do i install?
Click to expand...
Click to collapse
You'll need to open the zip file of the ROM you've flashed and find the boot.img contained within. Then use Hasoon's AIO Toolkit for HOX+ to flash the kernel (the bottom left option).
For some more information, the boot.img contains the kernel and the ramdisk for the device and is flashed to the boot partition of the device. Because the HOX+ is still S-OFF, we cannot flash the ROM and kernel together. We must flash the kernel (boot.img) separately using a utility called fastboot; the toolkit automates this process.
xdacalvien said:
The Kernel here is means boot.img.
Click to expand...
Click to collapse
Ok but how do i install the kernel if my pc is not even recognizing my phone?
Sorry for being a noob but i really don't want to break up my phone more than it already is.
Thanks.
LynchyY said:
Ok but how do i install the kernel if my pc is not even recognizing my phone?
Sorry for being a noob but i really dont want to **** up my phone more than it already is.
Thanks.
Click to expand...
Click to collapse
check the post #10, go to use the Hasson's AIO Kit to flash is more easier.
you need to install HTCDriver.exe from Hasson's AIO Kit.
xdacalvien said:
check the post #10, go to use the Hasson's AIO Kit to flash is more easier.
you need to install HTCDriver.exe from Hasson's AIO Kit.
Click to expand...
Click to collapse
I already have the HTCDriver.exe installed but my pc is not recognizing my phone because my phone don't boot.
LynchyY said:
I already have the HTCDriver.exe installed but my pc is not recognizing my phone because my phone don't boot.
Click to expand...
Click to collapse
Try to re-plug in the USB and test.
LynchyY said:
I already have the HTCDriver.exe installed but my pc is not recognizing my phone because my phone don't boot.
Click to expand...
Click to collapse
If the toolkit is not working, you'll need to do it manually I suppose.
1. Find the folder in the toolkit that contains fastboot.exe and navigate to that folder in a command prompt.
2. Hold the power and volume down buttons until your phone reboots into a white screen.
3. Connect it by USB if it isn't already and type "fastboot devices" and ensure that your device is listed (will just be a string of letters and numbers).
4. Once that works, type "fastboot flash boot path/to/boot.img" (I would recommend putting the boot.img in the same folder as fastboot.exe to make things easier on yourself).
5. If that command is executed successfully, run "fastboot reboot" if your device hasn't already rebooted.
xdacalvien said:
Try to re-plug in the USB and test.
Click to expand...
Click to collapse
Done that and nothing, my pc never recognizes the phone unless it is booted into android.At this point i can only get into the bootloader and recovery mode.
NasaGeek said:
If the toolkit is not working, you'll need to do it manually I suppose.
1. Find the folder in the toolkit that contains fastboot.exe and navigate to that folder in a command prompt.
2. Hold the power and volume down buttons until your phone reboots into a white screen.
3. Connect it by USB if it isn't already and type "fastboot devices" and ensure that your device is listed (will just be a string of letters and numbers).
4. Once that works, type "fastboot flash boot path/to/boot.img" (I would recommend putting the boot.img in the same folder as fastboot.exe to make things easier on yourself).
5. If that command is executed successfully, run "fastboot reboot" if your device hasn't already rebooted.
Click to expand...
Click to collapse
Thank you for this however i didnt work but maybe i did something wrong? Here is a SS of cmd after the process:
LynchyY said:
Thank you for this however i didnt work but maybe i did something wrong? Here is a SS of cmd after the process:
Click to expand...
Click to collapse
try" fastboot erase cache "
then " fastboot flash boot boot.img " again.
Remember, the boot.img is extract from the ROM.zip and put to the path same as fasboot.exe
LynchyY said:
Thank you for this however i didnt work but maybe i did something wrong? Here is a SS of cmd after the process:
Click to expand...
Click to collapse
ahh after this i tried again and the error was Low Battery so I will retry after charging my phone for a while.
Thanks again. I will let you know how it goes.
LynchyY said:
ahh after this i tried again and the error was Low Battery so I will retry after charging my phone for a while.
Thanks again. I will let you know how it goes.
Click to expand...
Click to collapse
After you haved success, you will become Member at this forum. FTW ~~~
How is now with your phone ?

Phone wont completely boot, recovery will not wipe everything, etc

So I fell asleep, woke up, and noticed that the system ui had crashed. Rebooted my phone and the boot animation kept going and going. Pulled battery and went into recovery (4EXT Recovery). Wiped cache+dalvik. Rebooted. Same boot animation issue. Went into recovery again. Wiped cache+dalvik. Attempted to dirty flash the rom again (Villuminati CM11). It was taking an unusually long time and the last line said "installing update" or "unpacking update". Something like that. Took the risk and pulled the battery and turned it on normally. Stuck at boot animation again. Rebooted into recovery. Wiped everything except SD card. Stuck at formatting /system and /data. Rebooted into recovery again. Proceeded to wipe everything one by one. Cache and Dalvik wiped normally. Next up was /system. Stuck at formatting /system. Gave up. Came here. Please help
HTC Evo 3D CDMA (Virgin Mobile)
ROM: Villuminati CM11
hboot: 1.50.50
4EXT Recovery
Try a different recovery, pg86img.zip. also look up linux terminal commands to check and repair filesystem, can be done from recovery or adb shell.
jcfunk said:
Try a different recovery, pg86img.zip. also look up linux terminal commands to check and repair filesystem, can be done from recovery or adb shell.
Click to expand...
Click to collapse
Tried flashing a different recovery and rebooted into recovery, it's still using 4EXT. I even erased recovery using "fastboot erase recovery" and then flashed TWRP again, still loads up 4EXT. I did the repair filesystem within 4ext. I'm using Windows. I don't know what else to do and I'm stuck without a phone for now.
KinoTheMystic said:
Tried flashing a different recovery and rebooted into recovery, it's still using 4EXT. I even erased recovery using "fastboot erase recovery" and then flashed TWRP again, still loads up 4EXT. I did the repair filesystem within 4ext. I'm using Windows. I don't know what else to do and I'm stuck without a phone for now.
Click to expand...
Click to collapse
Use fastboot to boot recovery
Download recovery img to computer
then
fastboot boot recovery.img
recovery.img = recovery img file
best to have in same directory as fastboot.exe
Are you s-off?
jcfunk said:
Use fastboot to boot recovery
Download recovery img to computer
then
fastboot boot recovery.img
recovery.img = recovery img file
best to have in same directory as fastboot.exe
Are you s-off?
Click to expand...
Click to collapse
alright that worked, thanks. yes i am s-off and with Jbear Hboot 1.50
KinoTheMystic said:
alright that worked, thanks. yes i am s-off and with Jbear Hboot 1.50
Click to expand...
Click to collapse
is the recovery formating for you?
Can also flash pg86img
fastboot oem rebootRUU
fastboot flash zip pg86img.zip
Computer will say done but status bar will freeze, need to
fastboot reboot
Here is 2 pg86img zips
https://www.androidfilehost.com/?fid=95916177934549025
https://www.androidfilehost.com/?fid=95916177934549027
jcfunk said:
is the recovery formating for you?
Can also flash pg86img
fastboot oem rebootRUU
fastboot flash zip pg86img.zip
Computer will say done but status bar will freeze, need to
fastboot reboot
Here is 2 pg86img zips
https://www.androidfilehost.com/?fid=95916177934549025
https://www.androidfilehost.com/?fid=95916177934549027
Click to expand...
Click to collapse
it's currently stuck at formatting data :/ should i just reboot into bootloader and flash the zips via fastboot?
edit: It's now formatting system. I will let it keep going
KinoTheMystic said:
it's currently stuck at formatting data :/ should i just reboot into bootloader and flash the zips via fastboot?
edit: It's now formatting system. I will let it keep going
Click to expand...
Click to collapse
Hope that works, if not, try to fastboot the zip
jcfunk said:
Hope that works, if not, try to fastboot the zip
Click to expand...
Click to collapse
alright, i did fastboot oem rebootRUU...it reboots but then it tries to load up the rom. Shouldnt it instantly go back to the bootloader?
KinoTheMystic said:
alright, i did fastboot oem rebootRUU...it reboots but then it tries to load up the rom. Shouldnt it instantly go back to the bootloader?
Click to expand...
Click to collapse
Your screen will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jcfunk said:
Your screen will look like this
Click to expand...
Click to collapse
no, not at all, it just tries to boot up the rom. I dont think there's any way out of this
KinoTheMystic said:
no, not at all, it just tries to boot up the rom. I dont think there's any way out of this
Click to expand...
Click to collapse
Since you are s-off, install eng-hboot. Then try again, also just try to flash zip in fastboot mode.
jcfunk said:
Since you are s-off, install eng-hboot. Then try again, also just try to flash zip in fastboot mode.
Click to expand...
Click to collapse
I put the PG86IMG zip for the eng-hboot onto my SD card, it went through the update process, rebooted when it said to....and my bootloader version is still jbear 1.50
KinoTheMystic said:
I put the PG86IMG zip for the eng-hboot onto my SD card, it went through the update process, rebooted when it said to....and my bootloader version is still jbear 1.50
Click to expand...
Click to collapse
Did you get it to work?
jcfunk said:
Did you get it to work?
Click to expand...
Click to collapse
no
KinoTheMystic said:
no
Click to expand...
Click to collapse
Wish I could get my hands on it and see if I could fix it.

Bricked Honor 7. What can I do now

I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
I decided to flash the stock recovery again. After I did that I got into rescue mode. I can not do anything anymore in there. No fastboot, no adb.
It just points to zh.ui.vmall.com/emotiondownload.php?mod=restore but in this list there is no download for the Honor 7.
Error messages are:
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can I do?
try to reboot on bootloader mode with volumes button combination
Doesn't work. I keep getting to this screen.
It looks like the bootloader but I guess it can not load the recovery.
Also fastboot does not work there.
I think i found the way
Hi-Suite installed on the PC. Phone off, connected to PC, press and hold Vol + and Power until the appearance of recovery.
Options available:
Reboot
Download the package
Switch off
Bootloader Mode (aka Fastboot):
Phone off, connected to the PC, press and hold Vol - Power up and appearance of the screen with the droid.
Or
Phone off, disconnected from the PC, press and hold Vol - and while holding down, connect to the PC.
Thanks for the help.
I can't get into recovery that way. When i press vol up + power I get into this screen again because recovery could not be loaded.
Unfortunately i don't think if there is a another way,,, contact with huawei
Try rumrunner on pc to get into fast boot mode.
Immediately close rum runner screen when it starts rebooting
sent with Huggzzz from my modded, non-OC'ed, very fast running S-Off ADR6425LVM on CyanogenMod 11 20150805 Rom with Tapatalk
etticat said:
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
I decided to flash the stock recovery again. After I did that I got into rescue mode. I can not do anything anymore in there. No fastboot, no adb.
It just points to zh.ui.vmall.com/emotiondownload.php?mod=restore but in this list there is no download for the Honor 7.
Error messages are:
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
What can I do?
Click to expand...
Click to collapse
Assuming that you have bootloader unlocked and adb debugging enabled. Otherwise, I guess, you're out of luck.
Extract RECOVERY.img of respective ROM you have installed using this method: http://forum.xda-developers.com/showthread.php?t=2433454. Copy dload of the same ROM to the root of sd card and insert it. Now turn off the phone and boot into fastbboot (bootloader): conect it turned off with usb to the pc, where you have drivers and platform tools installed. Then press and hold volume down and power on simultaneously as long as needed to boot to fastboot.
After that install previously extracted RECOVERY.img ([Guide]How to root Honor 7). Boot the system, enable adb debugging, go to settings-Updater-Local update and flash the ROM from dload.
Then you may flash custom recovery, replace the ROM, but never again without making nandroid first.
ǀcey said:
Try rumrunner on pc to get into fast boot mode.
Immediately close rum runner screen when it starts rebooting
sent with Huggzzz from my modded, non-OC'ed, very fast running S-Off ADR6425LVM on CyanogenMod 11 20150805 Rom with Tapatalk
Click to expand...
Click to collapse
Isn't rumrunner just for HTC?
Yea it probably is just for the resound. Idk.
I'm noob at all this.
What I do know is although my PC could see the phone perfectly before I tried to s-off. That once phone entered into never-ending boots the PC couldn't see the phone anymore. Hence I couldn't use abd or fastboot on the PC nor would the phone enter hboot, fastboot, + recovery on its own.
Somehow re-running rumrunner it was able to force the PC to see it enough to allow the phone to be forced into fastboot mode and that saved my poor phone.
At this point I think u [email protected] nuthin more to lose with trying it out. I hate to say that i'm sry.
In the least go read my post there maybe it's enough to help u to figure out how to undo what happened to yours.
If you do try to use rumrunner
Have phone powered on while hooked to PC
Say Yes twice in rumrunner
Rumrunner will try to selfupdate
Then it will try to force the phone to reboot
Watch phone screen..if it goes black
Immediately close rumrunner window on PC at that point.
We don't want rumrunner trying to s-off ur honor lol no and it will try soon as phone goes in fastbootmode. Keep phone plugged in PC.
If successful now load adb or whatever u need on pc
---------- Post added at 12:58 AM ---------- Previous post was at 12:57 AM ----------
http://forum.xda-developers.com/showpost.php?p=63595063&postcount=193
ooooo
فرستاده شده از HUAWEI Y330-U11ِ من با Tapatalk
hello.
i have a plk-l01 with stock 5.0.2 and stock recovery.
with multi-tool twrp and root flashed, than i would like to flash modaco rom v4.1 (MM)
now i have by booting "honor" logo and under powered by android.
i have flashed another custom rom (yoda 7.0) but is the same.
with stock recovery can´t flash any rom, while by 5% come error.
what methode will work to flash any rom or stock rom back to phone?
thanks
helpppp
Lefteris Fragiadakis (Frago) said:
try to reboot on bootloader mode with volumes button combination
Click to expand...
Click to collapse
i have same problem but i can access fastboot . i have downloaded stock rom in my pc is there anyway to flash stock rom from adb?
kosmoo said:
hello.
i have a plk-l01 with stock 5.0.2 and stock recovery.
with multi-tool twrp and root flashed, than i would like to flash modaco rom v4.1 (MM)
now i have by booting "honor" logo and under powered by android.
i have flashed another custom rom (yoda 7.0) but is the same.
with stock recovery can´t flash any rom, while by 5% come error.
what methode will work to flash any rom or stock rom back to phone?
thanks
Click to expand...
Click to collapse
You must flash the rom with twrp after wipe system, cache, data.
To install MM the basic version was to be the B330.
Now you have to reinstall the stock recovery and flash the rom complete B330 through the three button.
Inviato dal mio PLK-L01 utilizzando Tapatalk
AleAndroid96 said:
You must flash the rom with twrp after wipe system, cache, data.
To install MM the basic version was to be the B330.
Now you have to reinstall the stock recovery and flash the rom complete B330 through the three button.
Inviato dal mio PLK-L01 utilizzando Tapatalk
Click to expand...
Click to collapse
this method was good, thanks!
now have a stock recovery with stock b330 rom.
thanks
You can root it with twrp-3.0.2-0-plank.img and SuperSU 2.62
YOUTUBE /watch?v=eDyxj6C8eW8
etticat said:
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
I decided to flash the stock recovery again. After I did that I got into rescue mode. I can not do anything anymore in there. No fastboot, no adb.
It just points to zh.ui.vmall.com/emotiondownload.php?mod=restore but in this list there is no download for the Honor 7.
Error messages are:
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
What can I do?
Click to expand...
Click to collapse
dude, i hope you fixed you issue... i had the same problem just now... all normal until i installed a new version of supersu (2.7.4 i think) and i wiped the cache and dalvic cache (caused problems everytime) after that i couldnt boot the system, error 10 and 2 i think (boot and system).
Then, after the whole day was over and i didnt find a fix for my problem (my twrp worked) i backed up everything and then installed the original recovery i got some time ago from huawaiextractor, but it got worser. did the same like you, every damned step xD now i understood what you were talking about, before i didnt understand what you said...
so when i boot, it says error 10 ans 2 and when i want to start recovery it says 11 and 2 (recovery and boot).
i dont know why usb debugging didnt worked and why i coulnt use fastboot and adb like everytime. i once fixed a similar issue with the honor multitool and adb and fastboot.
Only thing i can do is connect it to my pc and hisuite, then a new menu shows where u can download a package or update, but it says failed everytime when i use it.
So what did you do with your bricked phone?
I had the same problems (errors) I managed to find a solution. Just extract boot.img cust.img repair.img system.img with huawei extractor. Than just make a full cache wipe. Flash this four .img and love your fully working, totally wiped, almost brand new phone!
PS you should find a way to use fastboot!! There is no other way!
ǀcey said:
Try rumrunner on pc to get into fast boot mode.
Immediately close rum runner screen when it starts rebooting
sent with Huggzzz from my modded, non-OC'ed, very fast running S-Off ADR6425LVM on CyanogenMod 11 20150805 Rom with Tapatalk
Click to expand...
Click to collapse
How did you do please ? i can't enter to fastboot mode too
can you help me please ?
etticat said:
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
What can I do?
Click to expand...
Click to collapse
With a stock boot.img sometimes you'll end up in bootloop like yourself. If you are still having issues follow below steps.
Boot into bootloader mode, if its looping very fast, then press and hold Vol DOWN button once the screen gets blank after a loop and simultaneously connect to PC, you'll land in bootloader mode.
Once in bootloader mode, flash system.img of your respective previous firmware, in your case just flashing system.img will do.
After doing that you can enter into system again. If you want you also can flash the whole UPDATE.APP package by three button combo
I hope this helps someone.

I can't boot into TWRP, please help. I have a lenovo TB-7304F.

I was trying to use twrp in my device to install a custom ROM, but when after flashing it i cant boot into it, i used sp flash tool and it does not recognise my device.
when booting through cmd i get this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the error that i get, i have unlocked bootloader
this might be useful to you guys i guess:
so please help me guys.
keep holding Volume Up while rebooting. do not release until you successfully entered TWRP recovery
Code:
fastboot flash recovery TWRP_lenovotb_7304f-030818.img
fastboot reboot
https://forum.xda-developers.com/t/...l-tb-7304f-hard-bricked.3934944/post-81607437
aIecxs said:
keep holding Volume Up while rebooting. do not release until you successfully entered TWRP recovery
Code:
fastboot flash recovery TWRP_lenovotb_7304f-030818.img
fastboot reboot
https://forum.xda-developers.com/t/...l-tb-7304f-hard-bricked.3934944/post-81607437
Click to expand...
Click to collapse
it doesnt works, held volume up just after i typed the command and brought me back to boot modes. there are 3 modes there: recovery mode, fastboot mode and normal mode.
selecting recovery mode would just show a android robot saying no command.
recovery mode is the right option. the no command screen is half way to stock recovery, flash twrp again. on the no command screen, press Power + Volume Up again to continue into recovery
aIecxs said:
the no command screen is stock recovery, flash twrp again
Click to expand...
Click to collapse
so i keep flashing until it happens?
aIecxs said:
the no command screen is stock recovery, flash twrp again
Click to expand...
Click to collapse
but it doesnt even boot into recovery now just boots into normal mode when selecting recovery mode. (only when connected to pc) but when removed from pc it boots into recovery mode and doesnt connect back to pc so fastboot command shows waiting for device.
What does the "no command" screen mean? (Trying to execute hard reset Recovery)
"The No Command screen means recovery checked the normal area (/cache) for an update file, like an OTA, and it didn't find one, so it had 'No Command' to execute. Androids stock recovery is intended for the normal, everyday user, giving them a menu they could easily access could cause lots of potentially angry people who are just playing around and reset their device by accident. Stock recovery, and its menu, are specifically engineered so that you have to take special steps to do anything. The No Command screen, meaning no automated script, is part of that safe guard."
source @acejavelin
aIecxs said:
What does the "no command" screen mean? (Trying to execute hard reset Recovery)
"The No Command screen means recovery checked the normal area (/cache) for an update file, like an OTA, and it didn't find one, so it had 'No Command' to execute. Androids stock recovery is intended for the normal, everyday user, giving them a menu they could easily access could cause lots of potentially angry people who are just playing around and reset their device by accident. Stock recovery, and its menu, are specifically engineered so that you have to take special steps to do anything. The No Command screen, meaning no automated script, is part of that safe guard."
source @acejavelin
Click to expand...
Click to collapse
ok, now i understood about the recovery menu, so to access the twrp recovery i would need to delete stock recovery i guess, but it would in turn brick my device so that just means i cant root my device, still going into root checker it says root availability is yes but it is hard to do it. so now im stuck on a roadblock...
no need to delete stock recovery, it's opposite. you're just not booting straight into recovery right after flashing, so twrp recovery got deleted:
aIecxs said:
(if you accidentially boot into android, twrp is gone, reflash and try again)
Click to expand...
Click to collapse
actually there are three different methods to root that device (I have linked) it's even possible on locked bootloader
your bootloader is unlocked already, so using fastboot is safest and most straightforward method
aIecxs said:
no need to delete stock recovery, it's opposite. you're just not booting straight into recovery right after flashing, so twrp recovery got deleted:
actually there are three different methods to root that device (I have linked) it's even possible on locked bootloader
your bootloader is unlocked already, so using fastboot is safest and most straightforward method
Click to expand...
Click to collapse
THERE ARE 3 METHODS!!!?? so ill just do the thing and see what happens.
VoxPlays08 said:
so ill just do the thing and see what happens.
Click to expand...
Click to collapse
This is exactly how people brick their devices. You must not do anything without understanding what you're doing...
why not just repeat post #2
aIecxs said:
This is exactly how people brick their devices. You must not do anything without understanding what you're doing...
why not just repeat post #2
Click to expand...
Click to collapse
Ok I'll reply if anything happens
maybe repeat download and make sure checksum matches?
Code:
certutil.exe -hashfile TWRP_lenovotb_7304f-030818.img MD5
bcb6aa10333edd89054f3bddca7abbdc
aIecxs said:
maybe repeat download and make sure checksum matches?
Code:
certutil.exe -hashfile TWRP_lenovotb_7304f-030818.img MD5
bcb6aa10333edd89054f3bddca7abbdc
Click to expand...
Click to collapse
checksum matches exactly
so flash it from fastboot and keep holding Volume Up while rebooting, select recovery mode
Im at the exact same spot, I can do the "fastboot flash recovery" but when rebooting, no matter what I press (when reboot) it always go to fastboot or normal boot..
the fastboot says its flashed ok in recovery, but I guess its overwritten when booting..
Stuck here..
If I choose recovery in fastboot using the Lenovo recovery and from there trying to flash with adb and 18.1 it erros out after 40% isch
I can use it but.. old.. and work wifi blocks me cuzzits old.

Categories

Resources