{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description: Flashable full realme ui firmware packages for twrp.
BE AWARE OF BACKING UP YOUR FILES, APPS AND SETTINGS BEFORE DOING THIS PROCEDURE, YOU MAY LOSE YOUR DATA.
Package Utilities: Upgrade, Downgrade, Change Region and Return to Stock Firmware.
Requirements:
- Unlocked Bootloader
- TWRP or Another custom recovery (TWRP: Download Here)
How to install: (Video Guide: Here)
1. Extract the zip package into a folder.
2. Connect your phone to your PC and move that folder to your phone.
3. Open a terminal or a command line window.
4. Run adb reboot recovery on your PC or simply hold volume down while turning power on to boot your device into the fastboot and use the volume buttons until you reach the option "Recovery mode" and press the power button.
5. In TWRP select Install
6. Use Install Image to switch to image installation mode.
7. Select SuperPartition.img from the folder that you move to the mobile.
8. Select Super partition.
9. Swipe the slider on the bottom to the right to confirm.
10. Return to the TWRP menu
11. Select Install again.
12. Select FlashablePackage.zip from the folder that you move to the mobile.
13. Swipe the slider on the bottom to the right to confirm.
14. Restart your phone and Done!
Alternative installation: (Video Guide: Here)
For those who are having problems with twrp internal storage.
Only PC
1. Extract the firmware zip package and twrp zip package into a folder, then rename the img extracted from the twrp package to twrp.img.
2. Open computer terminal in this folder and connect your device to the computer.
3. With phone off hold volume down while turning power on to boot your device into the fastboot.
4. In the computer terminal type fastboot flash boot twrp.img
5. After installing go back to the device and use the volume buttons until you reach the option "Recovery mode" and press the power button.
6. In TWRP select Advanced and then ADB Sideload
7. Swipe the slider on the bottom to the right to confirm.
8. In the computer terminal type adb sideload FlashablePackage.zip
9. Wait for the installation to finish, and go back to the menu and restart in Bootloader.
10. In the computer terminal type fastboot flash super SuperPartition.img
11. Wait for the installation to finish.
12. Restart your phone and Done!
Important Note: If you are having trouble booting or want to do a clean install, you will need to go back to recovery mode, as explained earlier, and format data.
Note: after this process if you want to lock the bootloader, restart again in fastboot mode and type the command "fastboot flashing lock"
Download List:
India:
RUI 2.0 Android 11 A.09: Download
Q3s version chinese allows to open the bootloader????
or only works with global model Kenya
RUNNER75 said:
Q3s version chinese allows to open the bootloader????
or only works with global model Kenya
Click to expand...
Click to collapse
China model can open bootloader
SrCDA said:
China model can open bootloader
Click to expand...
Click to collapse
In the Telegram group they say that the Chinese model does not allow to open Bootloader, I'm already confused
I will have to find out more or maybe I misunderstood or got the wrong answer.
Thanks!!!
RUNNER75 said:
In the Telegram group they say that the Chinese model does not allow to open Bootloader, I'm already confused
I will have to find out more or maybe I misunderstood or got the wrong answer.
Thanks!!!
Click to expand...
Click to collapse
look, when I made this package it was on a chinese device with an unlocked bootloader
but it has already been purchased unlocked
i think only the devices from india that can't unlock
SrCDA said:
Description: Flashable full realme ui firmware packages for twrp.
BE AWARE OF BACKING UP YOUR FILES, APPS AND SETTINGS BEFORE DOING THIS PROCEDURE, YOU MAY LOSE YOUR DATA.
Package Utilities: Upgrade, Downgrade, Change Region and Return to Stock Firmware.
Requirements:
- Unlocked Bootloader
- TWRP or Another custom recovery (TWRP: Download Here)
How to install: (Video Guide: Here)
1. Extract the zip package into a folder.
2. Connect your phone to your PC and move that folder to your phone.
3. Open a terminal or a command line window.
4. Run adb reboot recovery on your PC or simply hold volume down while turning power on to boot your device into the fastboot and use the volume buttons until you reach the option "Recovery mode" and press the power button.
5. In TWRP select Install
6. Use Install Image to switch to image installation mode.
7. Select SuperPartition.img from the folder that you move to the mobile.
8. Select Super partition.
9. Swipe the slider on the bottom to the right to confirm.
10. Return to the TWRP menu
11. Select Install again.
12. Select FlashablePackage.zip from the folder that you move to the mobile.
13. Swipe the slider on the bottom to the right to confirm.
14. Restart your phone and Done!
Alternative installation: (Video Guide: Here)
For those who are having problems with twrp internal storage.
Only PC
1. Extract the firmware zip package and twrp zip package into a folder, then rename the img extracted from the twrp package to twrp.img.
2. Open computer terminal in this folder and connect your device to the computer.
3. With phone off hold volume down while turning power on to boot your device into the fastboot.
4. In the computer terminal type fastboot flash boot twrp.img
5. After installing go back to the device and use the volume buttons until you reach the option "Recovery mode" and press the power button.
6. In TWRP select Advanced and then ADB Sideload
7. Swipe the slider on the bottom to the right to confirm.
8. In the computer terminal type adb sideload FlashablePackage.zip
9. Wait for the installation to finish, and go back to the menu and restart in Bootloader.
10. In the computer terminal type fastboot flash super SuperPartition.img
11. Wait for the installation to finish.
12. Restart your phone and Done!
Important Note: If you are having trouble booting or want to do a clean install, you will need to go back to recovery mode, as explained earlier, and format data.
Note: after this process if you want to lock the bootloader, restart again in fastboot mode and type the command "fastboot flashing lock"
Download List:
India:
RUI 2.0 Android 11 A.09: Download
Click to expand...
Click to collapse
how to unlock bootloader for realme 9 5g Speed edition Indian variant ?
SrCDA said:
Do not try to lock the bootloader, the consequences can be irreversible.
Click to expand...
Click to collapse
@AllexBast it removes twrps
SrCDA said:
Description: Flashable full realme ui firmware packages for twrp.
BE AWARE OF BACKING UP YOUR FILES, APPS AND SETTINGS BEFORE DOING THIS PROCEDURE, YOU MAY LOSE YOUR DATA.
Package Utilities: Upgrade, Downgrade, Change Region and Return to Stock Firmware.
Requirements:
- Unlocked Bootloader
- TWRP or Another custom recovery (TWRP: Download Here)
How to install: (Video Guide: Here)
1. Extract the zip package into a folder.
2. Connect your phone to your PC and move that folder to your phone.
3. Open a terminal or a command line window.
4. Run adb reboot recovery on your PC or simply hold volume down while turning power on to boot your device into the fastboot and use the volume buttons until you reach the option "Recovery mode" and press the power button.
5. In TWRP select Install
6. Use Install Image to switch to image installation mode.
7. Select SuperPartition.img from the folder that you move to the mobile.
8. Select Super partition.
9. Swipe the slider on the bottom to the right to confirm.
10. Return to the TWRP menu
11. Select Install again.
12. Select FlashablePackage.zip from the folder that you move to the mobile.
13. Swipe the slider on the bottom to the right to confirm.
14. Restart your phone and Done!
Alternative installation: (Video Guide: Here)
For those who are having problems with twrp internal storage.
Only PC
1. Extract the firmware zip package and twrp zip package into a folder, then rename the img extracted from the twrp package to twrp.img.
2. Open computer terminal in this folder and connect your device to the computer.
3. With phone off hold volume down while turning power on to boot your device into the fastboot.
4. In the computer terminal type fastboot flash boot twrp.img
5. After installing go back to the device and use the volume buttons until you reach the option "Recovery mode" and press the power button.
6. In TWRP select Advanced and then ADB Sideload
7. Swipe the slider on the bottom to the right to confirm.
8. In the computer terminal type adb sideload FlashablePackage.zip
9. Wait for the installation to finish, and go back to the menu and restart in Bootloader.
10. In the computer terminal type fastboot flash super SuperPartition.img
11. Wait for the installation to finish.
12. Restart your phone and Done!
Important Note: If you are having trouble booting or want to do a clean install, you will need to go back to recovery mode, as explained earlier, and format data.
Note: after this process if you want to lock the bootloader, restart again in fastboot mode and type the command "fastboot flashing lock"
Download List:
India:
RUI 2.0 Android 11 A.09: Download
Click to expand...
Click to collapse
As it turned out, with the help of TWRP, you can flash any OTA firmware, regardless of the region.
For a clean installation, flash the firmware into the slot where the system is and make the date format
To update, flash the firmware into the opposite slot where the system is without wipes and date format.
Firmware can be downloaded from my post on 4pda
Realme Q3s - Прошивки - 4PDA
Realme Q3s - Прошивки
4pda.to
I hope I don't bother posting this problem I had here
i try so many ways to unstuck(bootloop) realme Rmx 346(qs3 china version ) but I can not
also this tutorial
I also tried this from 4da
fastboot getvar current-slot
fastboot flash vendor_boot vendor_boot.img
fastboot flash boot boot.img
fastboot set_active other -------here the program shows me an error ( wrong command cmd)
fastboot flash vendor_boot vendor_boot. img
fastboot flash boot boot.img
fastboot set_active other
fastboot reboot
I no longer try another method for fear of rendering my device useless
I only have access to the fastboot mode and recovery mode ,
bootloader unlocked
maybe i'm doing something wrong
I await your comments , thnks
marcodx6 said:
I hope I don't bother posting this problem I had here
i try so many ways to unstuck(bootloop) realme Rmx 346(qs3 china version ) but I can not
also this tutorial
View attachment 5691749
I also tried this from 4da
View attachment 5691757
fastboot getvar current-slot
fastboot flash vendor_boot vendor_boot.img
fastboot flash boot boot.img
fastboot set_active other -------here the program shows me an error ( wrong command cmd)
fastboot flash vendor_boot vendor_boot. img
fastboot flash boot boot.img
fastboot set_active other
fastboot reboot
I no longer try another method for fear of rendering my device useless
I only have access to the fastboot mode and recovery mode ,
bootloader unlocked
View attachment 5691775
maybe i'm doing something wrong
I await your comments , thnks
Click to expand...
Click to collapse
Download the latest platform tool
How to install ADB on Windows, macOS, and Linux
A step-by-step guide to get you started with the Android Debug Bridge tool.
www.xda-developers.com
boot and vendor_boot must be from the firmware that was installed.
You can just flash the firmware again as described here
Realme Q3s - Прошивки - 4PDA
Realme Q3s - Прошивки
4pda.to
How to make a backup is described here
Realme Q3s - Прошивки - 4PDA
Realme Q3s - Прошивки
4pda.to
AllexBast said:
Download the latest platform tool
How to install ADB on Windows, macOS, and Linux
A step-by-step guide to get you started with the Android Debug Bridge tool.
www.xda-developers.com
boot and vendor_boot must be from the firmware that was installed.
You can just flash the firmware again as described here
Realme Q3s - Прошивки - 4PDA
Realme Q3s - Прошивки
4pda.to
How to make a backup is described here
Realme Q3s - Прошивки - 4PDA
Realme Q3s - Прошивки
4pda.to
Click to expand...
Click to collapse
thnks
thnks finally it works
SrCDA said:
Description: Flashable full realme ui firmware packages for twrp.
BE AWARE OF BACKING UP YOUR FILES, APPS AND SETTINGS BEFORE DOING THIS PROCEDURE, YOU MAY LOSE YOUR DATA.
Package Utilities: Upgrade, Downgrade, Change Region and Return to Stock Firmware.
Requirements:
- Unlocked Bootloader
- TWRP or Another custom recovery (TWRP: Download Here)
How to install: (Video Guide: Here)
1. Extract the zip package into a folder.
2. Connect your phone to your PC and move that folder to your phone.
3. Open a terminal or a command line window.
4. Run adb reboot recovery on your PC or simply hold volume down while turning power on to boot your device into the fastboot and use the volume buttons until you reach the option "Recovery mode" and press the power button.
5. In TWRP select Install
6. Use Install Image to switch to image installation mode.
7. Select SuperPartition.img from the folder that you move to the mobile.
8. Select Super partition.
9. Swipe the slider on the bottom to the right to confirm.
10. Return to the TWRP menu
11. Select Install again.
12. Select FlashablePackage.zip from the folder that you move to the mobile.
13. Swipe the slider on the bottom to the right to confirm.
14. Restart your phone and Done!
Alternative installation: (Video Guide: Here)
For those who are having problems with twrp internal storage.
Only PC
1. Extract the firmware zip package and twrp zip package into a folder, then rename the img extracted from the twrp package to twrp.img.
2. Open computer terminal in this folder and connect your device to the computer.
3. With phone off hold volume down while turning power on to boot your device into the fastboot.
4. In the computer terminal type fastboot flash boot twrp.img
5. After installing go back to the device and use the volume buttons until you reach the option "Recovery mode" and press the power button.
6. In TWRP select Advanced and then ADB Sideload
7. Swipe the slider on the bottom to the right to confirm.
8. In the computer terminal type adb sideload FlashablePackage.zip
9. Wait for the installation to finish, and go back to the menu and restart in Bootloader.
10. In the computer terminal type fastboot flash super SuperPartition.img
11. Wait for the installation to finish.
12. Restart your phone and Done!
Important Note: If you are having trouble booting or want to do a clean install, you will need to go back to recovery mode, as explained earlier, and format data.
Note: after this process if you want to lock the bootloader, restart again in fastboot mode and type the command "fastboot flashing lock"
Download List:
India:
RUI 2.0 Android 11 A.09: Download
Click to expand...
Click to collapse
will this relock my bootloader?
will stock rom of Realme Q3s works on Realme 9 SE ?, the problem with Indian Stock rom is worst Ram Management (sometime after clearing every app only 500MB ram available), I've to restart the device in order to get back 2.50 GB ram, please if have other country stock rom post it, and if someone knows Telegram link for this phone mod and others things please share it
Related
Hello
I have a Sony Xperia S LT26i
I used this manual to root my Sony:
Copy the CyanogenMod 9.1 package and the GApps package into your phone’s internal SD card.
Extract fastboot-win32.zip into the C:\ drive (root directory) of your computer.
Copy recovery-nozomi.img into the same folder where fastboot.exe has been extracted.
Open the CyanogenMod 9.1 ZIP file and extract the boot.img file into the same location as fastboot.exe.
Turn off your phone.
Reboot the phone into Fastboot Mode by holding down the Volume Up key as you connect the phone to your PC via USB cable.
On your computer, open a command prompt window as Administrator (i.e., click Start > All Programs > Accessories and right-click on Command Prompt, then select Run as Administrator from the context menu).
At the command prompt, enter the following command to change into the directory where the Fastboot files were extracted to:
cd c:\Fastboot
Check whether Fastboot is able to communicate with your phone by entering the command below. If you see your phone’s serial number, proceed to the next step. Otherwise, check whether your phone’s drivers are properly installed on your PC.
fastboot devices
Flash ClockworkMod Recovery to your phone by entering the following command:
fastboot flash boot recovery-nozomi.img
If successful, you see a “finished/OKAY” message on the command prompt. If not, try this command:
fastboot -i 0x0fce flash boot recovery-nozomi.img
Reboot your phone into Recovery Mode by entering the following at the command prompt:
fastboot reboot
Your phone ought to boot into Recovery Mode. While in Recovery Mode, use the Volume keys for scrolling and the Camera button for selecting.
On the recovery menu, select Install ZIP from SD card > Choose ZIP from SD card and select the CyanogenMod 9.1 package file. Confirm that you want to install the package.
Install the GApps package in the same manner as in step 13.
Return to the main recovery menu.
Select Wipe data/factory reset and confirm the action on the next screen.
Select Wipe cache partition and confirm the action on the next screen.
Select Advanced > Wipe Dalvik cache and confirm the action on the next screen.
Power off your phone.
Reboot the phone back to Fastboot Mode as in step 6.
On the command prompt on your computer, enter this command to flash the kernel to your phone:
fastboot flash boot boot.img
You will see “finished/OKAY” on the command prompt once the kernel is successfully flashed.
Reboot your phone into Normal Mode by enter the command fastboot reboot at the command prompt.
The first time your phone boots into the new ROM, startup can take around 5 to 7 minutes.
I forgot to do step one i cannot copy the
CyanogenMod 9.1 package and the GApps package into my phone’s internal SD card what should i do, thanks in advance just got stuck at cwm :crying:
I'm now by number 14 and i don't can select a Install Zip
Android Debug Bridge is not working because Clockworkmod is installed.
Fastboot works.
What should I do now?
PLEASE HELP ME
miche12 said:
Hello
I have a Sony Xperia S LT26i
I used this manual to root my Sony:
Copy the CyanogenMod 9.1 package and the GApps package into your phone’s internal SD card.
Extract fastboot-win32.zip into the C:\ drive (root directory) of your computer.
Copy recovery-nozomi.img into the same folder where fastboot.exe has been extracted.
Open the CyanogenMod 9.1 ZIP file and extract the boot.img file into the same location as fastboot.exe.
Turn off your phone.
Reboot the phone into Fastboot Mode by holding down the Volume Up key as you connect the phone to your PC via USB cable.
On your computer, open a command prompt window as Administrator (i.e., click Start > All Programs > Accessories and right-click on Command Prompt, then select Run as Administrator from the context menu).
At the command prompt, enter the following command to change into the directory where the Fastboot files were extracted to:
cd c:\Fastboot
Check whether Fastboot is able to communicate with your phone by entering the command below. If you see your phone’s serial number, proceed to the next step. Otherwise, check whether your phone’s drivers are properly installed on your PC.
fastboot devices
Flash ClockworkMod Recovery to your phone by entering the following command:
fastboot flash boot recovery-nozomi.img
If successful, you see a “finished/OKAY” message on the command prompt. If not, try this command:
fastboot -i 0x0fce flash boot recovery-nozomi.img
Reboot your phone into Recovery Mode by entering the following at the command prompt:
fastboot reboot
Your phone ought to boot into Recovery Mode. While in Recovery Mode, use the Volume keys for scrolling and the Camera button for selecting.
On the recovery menu, select Install ZIP from SD card > Choose ZIP from SD card and select the CyanogenMod 9.1 package file. Confirm that you want to install the package.
Install the GApps package in the same manner as in step 13.
Return to the main recovery menu.
Select Wipe data/factory reset and confirm the action on the next screen.
Select Wipe cache partition and confirm the action on the next screen.
Select Advanced > Wipe Dalvik cache and confirm the action on the next screen.
Power off your phone.
Reboot the phone back to Fastboot Mode as in step 6.
On the command prompt on your computer, enter this command to flash the kernel to your phone:
fastboot flash boot boot.img
You will see “finished/OKAY” on the command prompt once the kernel is successfully flashed.
Reboot your phone into Normal Mode by enter the command fastboot reboot at the command prompt.
The first time your phone boots into the new ROM, startup can take around 5 to 7 minutes.
I forgot to do step one i cannot copy the
CyanogenMod 9.1 package and the GApps package into my phone’s internal SD card what should i do, thanks in advance just got stuck at cwm :crying:
I'm now by number 14 and i don't can select a Install Zip
Android Debug Bridge is not working because Clockworkmod is installed.
Fastboot works.
What should I do now?
PLEASE HELP ME
Click to expand...
Click to collapse
Stock Room
Transfer via bootloader
miche12 said:
Hello
I have a Sony Xperia S LT26i
I used this manual to root my Sony:
Copy the CyanogenMod 9.1 package and the GApps package into your phone’s internal SD card.
Extract fastboot-win32.zip into the C:\ drive (root directory) of your computer.
Copy recovery-nozomi.img into the same folder where fastboot.exe has been extracted.
Open the CyanogenMod 9.1 ZIP file and extract the boot.img file into the same location as fastboot.exe.
Turn off your phone.
Reboot the phone into Fastboot Mode by holding down the Volume Up key as you connect the phone to your PC via USB cable.
On your computer, open a command prompt window as Administrator (i.e., click Start > All Programs > Accessories and right-click on Command Prompt, then select Run as Administrator from the context menu).
At the command prompt, enter the following command to change into the directory where the Fastboot files were extracted to:
cd c:\Fastboot
Check whether Fastboot is able to communicate with your phone by entering the command below. If you see your phone’s serial number, proceed to the next step. Otherwise, check whether your phone’s drivers are properly installed on your PC.
fastboot devices
Flash ClockworkMod Recovery to your phone by entering the following command:
fastboot flash boot recovery-nozomi.img
If successful, you see a “finished/OKAY” message on the command prompt. If not, try this command:
fastboot -i 0x0fce flash boot recovery-nozomi.img
Reboot your phone into Recovery Mode by entering the following at the command prompt:
fastboot reboot
Your phone ought to boot into Recovery Mode. While in Recovery Mode, use the Volume keys for scrolling and the Camera button for selecting.
On the recovery menu, select Install ZIP from SD card > Choose ZIP from SD card and select the CyanogenMod 9.1 package file. Confirm that you want to install the package.
Install the GApps package in the same manner as in step 13.
Return to the main recovery menu.
Select Wipe data/factory reset and confirm the action on the next screen.
Select Wipe cache partition and confirm the action on the next screen.
Select Advanced > Wipe Dalvik cache and confirm the action on the next screen.
Power off your phone.
Reboot the phone back to Fastboot Mode as in step 6.
On the command prompt on your computer, enter this command to flash the kernel to your phone:
fastboot flash boot boot.img
You will see “finished/OKAY” on the command prompt once the kernel is successfully flashed.
Reboot your phone into Normal Mode by enter the command fastboot reboot at the command prompt.
The first time your phone boots into the new ROM, startup can take around 5 to 7 minutes.
I forgot to do step one i cannot copy the
CyanogenMod 9.1 package and the GApps package into my phone’s internal SD card what should i do, thanks in advance just got stuck at cwm :crying:
I'm now by number 14 and i don't can select a Install Zip
Android Debug Bridge is not working because Clockworkmod is installed.
Fastboot works.
What should I do now?
PLEASE HELP ME
Click to expand...
Click to collapse
Access bootloader, connect your phone to pc, select an option that enables pc to recognize your device(differs with different devices and all other pc tools must be installed to the pc), copy the files to your phone adn flash 'em thru recovery tool. Evrything shud work fine then.
Elephone M3 quickest way to UNLOCK Bootloader, ROOT and TWRP (no SP FlashTool) Windows/ Linux.
This is only provided as a guide and/ or an alternative, in case some people find the process of flashing with SP FlashTool for the Elephone M3 complicated (either installing the correct drivers, or correctly using the tool without accidentally wiping Vram, or anything else important).
Click to expand...
Click to collapse
Windows:
Things you will need:
1. adb and fastboot
2. usb driver for Elephone M3
3. a copy of a correct version of TWRP for the device, copied in the adb and fastboot folder. Rename your TWRP.img file to recovery.img
4. latest flashable supersu.zip (V2.82 and above) and the recovery.img on external SD card.
Process:
1. Install the above.
2. Boot your phone normally, and enable developer options.
3. From developer options enable OEM unlocking and USB debugging. Connect the device to computer and enable MTP transfer.
4. On your phone's screen you should see a message with a "key" or "fingerprint", accept the connection.
5. Navigate to the folder you have installed adb and fast boot and copied pre-mentioned file.
6. Open a command prompt navigate to the adb folder (not powershell prompt if you are on windows 10 1703) and type: adb devices
If all is well you should get a number on the left and "device" next to it.
7. type "adb reboot to bootloader". You are now in fastboot.
8. type "fastboot oem unlock". Carefully look the really small letters on the elephone' s screen and confirm. Reboot the device. Really important as after unlocking the bootloader, a factory reset is triggered.
9. Once the factory reset is done, once again enable developer otions and usb debugging.
10. Open a command prompt again and once again get into fastboot mode (as previously described).
11. Type "fastboot boot recovery.img". You should now see TWRP.
12. From TWRP select install and install supersu. Wipe dalvik/cache and reboot.
13. Once boot-up completes and you make sure you have root access (you should), for the last time reboot to bootlader.
14. Again "fastboot boot recovery.img". From TWRP select install, install image, select recovery.img from your extenral SD and flash it to recovery.
If all went well, you should by now have unlocked the bootloader, have your device rooted, and also have a functional TWRP recovery! :fingers-crossed::fingers-crossed:
Linux:
Things you will need:
1. abd and fastboot (sudo apt-get install android-tools-adb android-tools-fastboot) ---> or similar for your version of the system.
2. a copy of a correct version of TWRP for the device. Rename your TWRP.img file to recovery.img
3. latest flashable supersu.zip (V2.82 and above) and the recovery.img on external SD card.
Process:
1. Boot your phone normally, and enable developer options.
2. From developer options enable OEM unlocking and USB debugging. Connect the device to computer and enable MTP trasfer.
3. On your phone's screen you should see a message with a "key" or "fingerprint", accept the connection.
4. Navigate to the folder you where you keep the TWRP recovery.img and open a terminal.
5. type "adb devices". If your device is recognized you should see a number and "device" next to it.
6. type "adb reboot to bootloader". You are now in fastboot.
7. type "sudo fastboot oem unlock". Carefully look the really small letters on the elephone's screen and confirm. Reboot the device. Really important as after unlocking the bootloader, a factory reset is triggered.
8. Once the factory reset is done, once again enable developer otions and usb debugging.
9. Open a terminal and once again get into fastboot mode (as previously described).
10. Type "sudo fastboot boot recovery.img". You should now see TWRP.
11. From TWRP select install and install supersu. Wipe dalvik/cache and reboot.
12. Once boot-up completes and you make sure you have root access (you should), for the last time reboot to bootlader.
13. Again "sudo fastboot boot recovery.img". From TWRP select install, install image, select recovery.img from your external SD and flash it to recovery.
If all went well, you should by now have unlocked the bootloader, have your device rooted, and also have a functional TWRP recovery! :fingers-crossed::fingers-crossed:
I am not able to provide links for files or files at the moment, please look for them yourselves, it should not be hard!
If you found the thread useful, I would appreciate it if you hit the "thanks button". :good::good:
Also, do post back if you need further clarification or assistance or if you have any suggestions for improving the guide.
Hey there!
so, I just upgraded my z5c from MM CyanogenMod to this nougat ROM > [ROM][7.0][Stock][.33][3.7 b7][Deodex][DeBloat][Font][Stereo][Vulkan™] Xperia Loop™
Before the update I could enter TWRP without any problems.
Now, everytime I try to boot into recovery the phone simply reboots...
Things I've tried:
• Typed "adb reboot recovery" on CM
• Downloaded TWRP App to re-flash and click on "recovery reboot"
• Power up phone holding Volume Down
The phone is rooted with SuperSU.
The main reason I wanted to regain access to recovery is to re-root the phone with Magisk.
Thanks for your time.
1. install fastboot and fastboot drivers on your pc (if you don't have them obviously)
2. plug the phone into the pc using the usb cable while holding the volume + button (this way you will skip the adb part)
3. wait for the notification light to go blue
4. go into the fastboot directory
5. download the twrp "recovery.img" file and put it into the fastboot directory
6. hold shift while right-clicking into the directory where fastboot is
7. use the option to open a cmd into the directory
8. type in "fastboot boot recovery.img"
if your phone's fastboot drivers don't have signature (like it happened to me) download Zadig and create a signature for the driver
Hope this helps... i had the same problem and solved by doing this
hi Guys,
3days ago, I decided to unlock my boot loader and root my phone via following the steps from www*youtube*com/watch?v=R4c0fO8Kr_Q[/url]
when i tried to flash TWRP - i was stuck in the boot loader warning screen. i am still able to got recovery but it is not being detected can you help me with this?
Normal TWRP has known problems...
You can try flashing Squid TWRP (https://forum.xda-developers.com/mo...wrp-squid-twrp-recovery-moto-e-lte-t3137649): is a unbloated and optimized twrp for our device.
This situation has appened to me and i resolved by installing that TWRP.
dxp420 said:
Normal TWRP has known problems...
You can try flashing Squid TWRP (https://forum.xda-developers.com/mo...wrp-squid-twrp-recovery-moto-e-lte-t3137649): is a unbloated and optimized twrp for our device.
This situation has appened to me and i resolved by installing that TWRP.
Click to expand...
Click to collapse
do you have the steps?
resume666 said:
do you have the steps?
Click to expand...
Click to collapse
From the video you posted before i assuming you have already installed motorola driver and fastboot or mfastboot.
Here are the steps:
0- Download SQUID TWRP and place it in e.g. C:\ (last version is twrp-surnia-3.2.1-r1.img);
1- Shut down your phone;
2- Press Power Button + Vol Up until you see bootloader screen;
3- Now connect your phone to PC;
4- On PC, open a commad window pront (Start -> "cmd" on research bar, then enter);
5- Cmd prompt;
6- Type "fastboot devices". It should show a serial number: PC has recognized your device;
8- Then type "fastboot flash recovery C:\twrp-surnia-3.2.1-r1.img" last parameter is the path where you placed recovery so change it if you have choosen another path;
9- Wait for 3-4 seconds until the prompt shows something similar to "complete" or "success";
10- Type "fastboot poweroff" and your device shuts down.
Now you have installed Twrp Recovery, if you want access it, repeat steps 1-2 and select recovery from bootloader menu.
If you want install a custom rom i suggest SlimRoms : follow the instructions to download and install this rom.
dxp420 said:
From the video you posted before i assuming you have already installed motorola driver and fastboot or mfastboot.
Here are the steps:
0- Download SQUID TWRP and place it in e.g. C:\ (last version is twrp-surnia-3.2.1-r1.img);
1- Shut down your phone;
2- Press Power Button + Vol Up until you see bootloader screen;
3- Now connect your phone to PC;
4- On PC, open a commad window pront (Start -> "cmd" on research bar, then enter);
5- Cmd prompt;
6- Type "fastboot devices". It should show a serial number: PC has recognized your device;
8- Then type "fastboot flash recovery C:\twrp-surnia-3.2.1-r1.img" last parameter is the path where you placed recovery so change it if you have choosen another path;
9- Wait for 3-4 seconds until the prompt shows something similar to "complete" or "success";
10- Type "fastboot poweroff" and your device shuts down.
Now you have installed Twrp Recovery, if you want access it, repeat steps 1-2 and select recovery from bootloader menu.
If you want install a custom rom i suggest SlimRoms : follow the instructions to download and install this rom.
Click to expand...
Click to collapse
it did not worked i think i hard bricked it
No it not hard bricked.you just need to flash the stock rom.and then it start working.
Required
Download: APP (Second Phone)
Download: TWRP (Second Phone)
OTG ADAPTER, SECOND PHONE
SUPPORT DEVICES: FASTBOOT DEVICES
UNSUPPORTED DEVICES: XIAOMI DEVICES
BOOTLOADER UNLOCK1. Turn ON Debugging USB, OEM UNLOCK on your device.
2. Connect Your Main Phone with Second phone by OTG ADAPTER
3. Reboot your phone to Fastboot Mode
4. Open APP on Second Phone and open LAST TAB and click reboot bootloader. (This reboot your Main Phone to Fastboot Mode)
5. Open Blue Button bottom and type fastboot flashing unlock fastboot flashing critical_unlock
You can try too fastboot oem unlock
YOU UNLOCKED THE BOOTLOADER
TWRP FLASH1. Type fastboot flash recovery and click attachment icon at the top, choose your TWRP.img file. Send command.
ROOT PHONE1. Configure your phone and Download Magisk on your main phone.
2. Rename Magisk.apk to Magisk.zip and reboot your phone to Recovery Mode (Off phone and hold Power Button and Volume UP)
3. Click INSTALL choose your Magisk.zip file and flash
NOW YOU HAVE ROOTED PHONE!
is this tested and working, tnx for sharing btw