black screen after reboot from recovery mode - Samsung Galaxy S 4 Zoom

Hi,
my galaxy k zoom was booting in loop. After 3 reboots, the recovery mode menu appeared. I chosed to reboot the device. A few error messages appeared in red but I had the time to read. And since that moment, I've a blank screen. I'm unable to access the recovery mode. The combination of the keys doesn't do anything. Any idea anybody ? If only a can have a chance to go back to the recovery mode, I will know what to do next. But I'm stucked
Thanks in advance,
jc

maybe can flash firmware ?

Thanks for your response. In fact, I let this S3 aside for a few weeks and when I came back, I was able to log in again. This happened to me few months ago with this device. That's strange. Maybe a timeout somewhere or something happened when the battery was empty ?
Cheers

Related

Help!!! My Samsung galaxy player is bricked! (i think)

hello, my name is shahrukh and i need some help. i downloaded animmod (from 4shared) and then i donwloaded busybox. then i pressed blur and then it asked me if i want to reboot it. i pressed yes. this is when the problem starts. It turned off and then it turned on half way and then it turned off. it kept doing that and then i just left it for the night. in the morning it was not doing anything. when i held the power button it turned off and on for like two times and then turned off. i cant even start it up so i have no idea what to do.
i don"t know what to do
please help!!!!
Okay, we need details, describe exactly when "halfway on" is. We need your full model number and rom version (if you know it). Have you tried plugging it in to charge? Does it show anything now that you try to boot it? try holding volume up and powering on to enter recovery menu.
details
ok so when it turns on it says samsung. then after like 10 seconds it turns off. it does that for a few times and then it just goes in a black screen. the model number is YP-G7OC/NAW. when i plug it in to charge it goes on and off two times and then off. if it has low battery it just shows the sign. as for the rom i don't think i have any. i just rooted it using superoneclick. if it goes to recovery mode what do i do?
thanks!
(you got me really fired up when i saw the recovery menu!)
If you can get to recovery menu, try a factory reset, and clear cache. I am not sure if there is a recovery rom for your device, you should check samfirmware.com
tried both of them...no luck. and i couldn't find a recovery rom on samfrimware.com.
Your device has capacitive or mechanical home button?
it has a capacitive home button...the usa version
shahrukhraza said:
it has a capacitive home button...the usa version
Click to expand...
Click to collapse
The phone boots in recovery?
If so, I can investigate a little more what's happening.
I'll try to post a return-to-stock image soon... The problem is that mine is cluttered with crap that the zergRush exploit added (it insisted on installing busybox instead of just rooting...)
(I'm not sure, but I think someone else already posted a stock zImage and system image...)
Here is the post about fixing capacitive buttons. A quick search of forum should have found it.
http://forum.xda-developers.com/showthread.php?t=1421797
Sent from my YP-G70 using Tapatalk
nooooooo!!! you guys have all got it wrong. first of all it doesnt boot in recovery. the only way to get in recovery mode is when it shows the battery sign i hold "up volume"+ power button.and the capaciative button is completely fine. im just stuck in a bootloop (i think) and it has nothing to do with a broken capacitive button! i will try to post a video today to show you guys exactly whats happening.
i kind of had the same problem, one time i thought i had entropy's kernel on and i had CWM well i didn't but i still thought i had so i tried rebooting into recovery using the terminal:
su
reboot recovery
then i turned off and went to this weird recovery menu it had four options, reboot system, apply update from SD card, wipe data partition, and power off and it had a ton of red letters and words saying like, couldn't access data partition or cache partition and couldn't access /data/media, or system, and then i just turned it off because i wouldn't let me choose an option, and then i got stuck in a loop but not during when it says SAMSUNG mine happened during the animation music part that look like fireworks and then SAMSUNG would light up blue then go through it again and 2 more times then go black and i tried flashing the US stock ROM in download mode but still would go through the loop and it doesn't even charge so i got nothing
so did you somehow fix yours? and i never got a recovery menu that showed something about shut down.:confused
Before brick
xxxxxxxxxxxxxxxxx
wait....are you asking me those questions? just to tell you im no developer or something. im just a 12 year old who has his galaxy player stuck in a boot loop. you have to make another thread if you have a problem.
sorry!
Ok. : ) You got it wrong. No problem. His case is different from mine. Just wanted to use her Brick in case. Nothing more. good luck.
I resolve my doubts alone. Nothing that Google does not respond. haha
At least before brick.
ok. let me ask google too xD
anyways..anyone have any idea of how to fix this boot loop?
im trying to do the Linux thing by running the ressurector ans the VM windows the forum is posted under development called hard brick recovery for galaxy 5.0
ok.(i have no idea what you are saying...just saying!)

[Q] Samsung S6500 problem

Hi everyone, I have this weird problem with my S6500, or rather my younger brother has.
He tried to put on his S6500 (not D, this phone is with NFC) Cyanogenmod 10.1, after some ups and downs, he finally got it to work, but... camera wasn't working, it was said on the cyanogenmod page to flash with the newest update, he did that, phone worked good... almost, after he was blocking his screen, he couldn't unlock it, because there was some kind of white screen stuff, weirder was the thing, that he could hear all the *clicking* sounds as he was trying to unlock. He had to restart the phone every time after he blocked the screen, so he wanted the phone to function normally and tried to put his stock ROM back again. Well the flashing went well (as Odin showed) but the phone stucked in bootloop.
The phone showed the Orange logo (he is using his original stock rom from Orange Poland, downloaded from sammymobile) and then it quickly changed to Samsung logo, after that the phone vibrates once, and after that it vibrates 3 times really fast and restarts from the Orange logo.
He tried to get into Recovery mode, but coul;dn't (the phone doesn't react to any of the combinations we found - vol+,vol-, home and power and many others), and as I forgot to mention before, after every flash (while the recovery was working) he cleared data in menu of the recovery.
We also tried the different method to boot the phone into recovery mode (put it in Download mode, which works and then instead of going further by pressing vol+ we pressed the down button and held vol+,vol- and home button, but instead of going into recovery the phone booted in weird screen with small letters RAMDUMP MODE (ARM9 mode).
We tried several times to flash new recovery with Odin, but it doesnt work, the PIT file also doesn't work, or can someone provide me with the stock s6500 PIT file as I couldn't find one, because I read in the Polish forum, that screen mentioned before only shows up if there is a SuperUser app in the phone, so we need the PIT file to flush it.
So the problem is after flashing it with numerous cwm and original stock roms we couldn't get it to boot or to get into recovery menu, or get it working.
Also the hardware is all ok, as the phone is almost brand-new ( he got it from the Orange few months ago).
So help plz?
I have the very SAME problem with my S6500D. Same as described above.
Anyone has managed to fix this problem ? I have all needed tools.

[Q] SIII will not boot

Hi
So I've had my Samsung SIII for just over 18 months, and it's all worked fine etc. I've never rooted it or anything.
But this morning it will not boot up. When I try to switch it on the start up sequence happens, but it gets stuck on the flashing Samsung splash screen. If I turn it off it just restarts and ends up back on that screen. The only way to stop it is to take the battery out.
I've tried starting it in recovery mode (power+home button+vol up), but the standing, open android just flashes and I end up with the android lay down with the red exclamation mark from there. It then loops between the two androids and the Samsung SIII start up logo screen. I have tried to press the volume buttons whilst on the red exclamation mark screen but cannot get to anywhere from it.
However, it will load the download mode (power+home button+ vol down) just fine.
I have looked all over but most people encountering anything similar have rooted their devices, which I have not.
Also, last week I lost all of my contacts which were stored on the device (I don't know why) but that might have something to do with it.
I don't particularly want to hard reset the phone and lose everything, but if it's the only solution I will do.
Thanks.
In download mode is the product number shown or a blank?
If it shows i9300 then you have a good chance of flashing either a full stock rom or a rescue firmware (see general forum) using odin. You will need to factory reset in recovery afterward, but your data is almost certainly unrecoverable.
If the product number is blank then you have partial SDS and require a new motherboard.
Sent from my GT-I9300 using Tapatalk
rachypoo said:
Hi
So I've had my Samsung SIII for just over 18 months, and it's all worked fine etc. I've never rooted it or anything.
But this morning it will not boot up. When I try to switch it on the start up sequence happens, but it gets stuck on the flashing Samsung splash screen. If I turn it off it just restarts and ends up back on that screen. The only way to stop it is to take the battery out.
I've tried starting it in recovery mode (power+home button+vol up), but the standing, open android just flashes and I end up with the android lay down with the red exclamation mark from there. It then loops between the two androids and the Samsung SIII start up logo screen. I have tried to press the volume buttons whilst on the red exclamation mark screen but cannot get to anywhere from it.
However, it will load the download mode (power+home button+ vol down) just fine.
I have looked all over but most people encountering anything similar have rooted their devices, which I have not.
Also, last week I lost all of my contacts which were stored on the device (I don't know why) but that might have something to do with it.
I don't particularly want to hard reset the phone and lose everything, but if it's the only solution I will do.
Thanks.
Click to expand...
Click to collapse
Do has boomboomer said above but as a last resort before flashing back to stock or a rescue firmware if you flash PhilZ recovery in download mode with odin.You then have a Aroma option in PhilZ recovery to browse and copy phone files so you may be able to recover some data pictures etc.
Please read PhilZ thread >> http://forum.xda-developers.com/showthread.php?t=2201860 << and the special features thread about Aroma file manager in post #3
Please note use as a last resort to get your data back! and read everything! Also all this is presuming you can get into PhilZ recovery after flashing..
I'm having the same problem , been looking through lots of topics. When I switch on the phone it's not booting android guy lays on his back. Download mode and Android Recovery are in my range.
I've been trying to flash stock-firmware from sammobile.com with ODIN but no effect , I mean It all went OK in Odin Operation list than fially phone reset and PASS. But this android guy is still laying on his back and making fun of me xD
Before trying to get back to stock ROM, I've had rooted phone and installed RR with 4.4.2 for S3, now I don't have a clue what shall I do next ...
Any ideas ? (the noob[me] have asked )
Stuck on samsung logo
Hi my s3 got stuck in the boot samsung logo.
It happend after I went to CWM app and created partition from there.
After I reboot it , then it froze down there.
S3-rooted running cyanogen mod 10.2
Teamdaiwa said:
Hi my s3 got stuck in the boot samsung logo.
It happend after I went to CWM app and created partition from there.
After I reboot it , then it froze down there.
S3-rooted running cyanogen mod 10.2
Click to expand...
Click to collapse
You buggered the partitions .
Remove partition .
SOLVED >>
I have solved my problem with this lying android guy on his back , after trying to get back stock. So the thing was on my phone there have been left the kernel from Resurection Remix , I have updated it to Custom Kernel from this topic
http://forum.xda-developers.com/showthread.php?t=2563562
And my newest version of stock firmware is swimming very nice I hope This will help someone

[Q] Note 2 stuck on boot, screen shifting

My Note II (N7100) won't start up and I don't know what is the cause. The text "galaxy note 2" is showing and right after that, the text buzzes away.
I already tried to flash stock rom, but it did not help (I don't know if I had the right one, however, on download mode it says samsung official. My device is the international version, I live in Holland. Also, in download mode, the screen does not shift like it does in recovery mode and in the startup animation).
I also tried to get into recovery mode, and managed to restore to factory settings and wipe cache, options in recovery mode were hard to read because of the shifting screen. Please help me.
My device had been rooted, but I flashed stock rom again about a month ago. Last night I went to sleep and put my phone on the charger, my alarm was still working, but when I woke up my phone did not start up anymore.

Galaxy S6 edge showing only the first logo

Guys, this is something I never seen before.
So, my wife's SM-G925F, original firmware, knox, all stock.
While video-calling her mother, some glitches appear on the screen. After that, another video call with my mom, again glitches. I advice her to restart the phone.
Than, BOOM! Screen is always black, except the first SAMSUNG Galaxy S6 edge - powered by android white logo.
The phone is starting, it enters the operating system, you can press the screen, you can feel the vibration feedback (i suppose on pin or maybe phone password), but you can see nothing.
I tried enter recovery mode, screen black. I don't know if it enters or not.
It enters download mode, so I tried the following:
1. root the phone
2. installing TWRP
3. flash latest original ROM via ODIN.
Nothing helped, same thing. I can see the phone in My Computer, but with no access to the files, Samsung Smart Switch recognizes the phone but I can't do anything because it's locked.
I've got no idea what to do next. I was thinking about clearing the cache partition, but don't know if it's possible through download mode.
Anyone else encountered this problem? Do you have any suggestion?
Any help much appreciated!
Thanks!
VladyCu said:
Guys, this is something I never seen before.
So, my wife's SM-G925F, original firmware, knox, all stock.
While video-calling her mother, some glitches appear on the screen. After that, another video call with my mom, again glitches. I advice her to restart the phone.
Than, BOOM! Screen is always black, except the first SAMSUNG Galaxy S6 edge - powered by android white logo.
The phone is starting, it enters the operating system, you can press the screen, you can feel the vibration feedback (i suppose on pin or maybe phone password), but you can see nothing.
I tried enter recovery mode, screen black. I don't know if it enters or not.
It enters download mode, so I tried the following:
1. root the phone
2. installing TWRP
3. flash latest original ROM via ODIN.
Nothing helped, same thing. I can see the phone in My Computer, but with no access to the files, Samsung Smart Switch recognizes the phone but I can't do anything because it's locked.
I've got no idea what to do next. I was thinking about clearing the cache partition, but don't know if it's possible through download mode.
Anyone else encountered this problem? Do you have any suggestion?
Any help much appreciated!
Thanks!
https://youtu.be/zXSHe3oorIM
Click to expand...
Click to collapse
If the ODIN can not help you to fix this problem, try with this dr.fone - Repair. It can help to repair Android system issues easily.
What is this dr.fone **** asking for money... to flash some ROM??
Also, a little update here. It seems that I managed to boot the phone into TWRP, but with no image on screen. Via adb I managed to install a new custom ROM (SuperStock S8 Fast Lite For Galaxy S6 Stable G920F/G920FD/G925F), it boots up as I can hear the sound made by the volume buttons, but all with no image. I also erased dalvik cache via adb.
I'm starting to think that the phone is broken (like physically), but I can't understand why I see the first logo (white on black) and why I see download mode
the dr.fone is not free. If your phone is broken by physically, maybe you can not see the download mode.
Coming up here with a little update: it seems that if you don't try to start the phone a day or two, after that it works like nothing happened. Until you turn off the screen the first time, than you can not turn it on again, and it's doing the same thing, showing image only on first logo and in download mode.
This is really-really strange.
No one?
VladyCu said:
Guys, this is something I never seen before.
So, my wife's SM-G925F, original firmware, knox, all stock.
While video-calling her mother, some glitches appear on the screen. After that, another video call with my mom, again glitches. I advice her to restart the phone.
Than, BOOM! Screen is always black, except the first SAMSUNG Galaxy S6 edge - powered by android white logo.
The phone is starting, it enters the operating system, you can press the screen, you can feel the vibration feedback (i suppose on pin or maybe phone password), but you can see nothing.
I tried enter recovery mode, screen black. I don't know if it enters or not.
It enters download mode, so I tried the following:
1. root the phone
2. installing TWRP
3. flash latest original ROM via ODIN.
Nothing helped, same thing. I can see the phone in My Computer, but with no access to the files, Samsung Smart Switch recognizes the phone but I can't do anything because it's locked.
I've got no idea what to do next. I was thinking about clearing the cache partition, but don't know if it's possible through download mode.
Anyone else encountered this problem? Do you have any suggestion?
Any help much appreciated!
Thanks!
Click to expand...
Click to collapse
Here is a video can fix the Samsung Logo, boot loop, black screen and more error of Samsung S6 edge
https://www.youtube.com/watch?v=zXSHe3oorIM

Categories

Resources