I had a J6, just rooted months ago. Everything was fine, I got it rooted successfully, and today I just updated Magisk this afternoon and restart it. And it got bootloop.
I don't know what to do so I wipe data and cache partition. It didn't help
My phone can't connect to my laptop, Odin didn't detect my phone, Installing Samsung USB Drivers didn't help
My phone could only go to recovery mode and go to Downloading mode
Can anyone help me plz?
Try to reflash the stock rom maybe
Hello,
is your phone a SM-J600FN/DS? And how do you root?
Thanks
Efcegames said:
Try to reflash the stock rom maybe
Click to expand...
Click to collapse
To reflash the stock ROM we need Odin to detect my phone to flash. It didn't detect anything (despite already have Samsung USB Driver). I was stupid not installing TWRP before rooting my phone. What should I do now?
[SOLVED]: IT WAS THE CABLE PROBLEM​
It turns out that the problem all along was the cable. I had 2 Micro USB cables and none of them connect the phone to computer, only in charge mode
So I borrowed my mom's Xiaomi cable and it worked perfectly. Just connect to computer, open Odin and flash the stock ROM back.
After this incident I don't feel like I want to root phone. It was good but it seems to me that Magisk has a lot of problems right now... Or probably just me
Related
Hi there,
I tried to flash CM 10.1 on my friend's Samsung Galaxy SII I9100G. I followed the Tutorial from the CM's wiki, but it didn't worked because I got errors from Heimdall. After a few minutes with google I tried Odin and it worked without any Problems. After flashing cm-10.1-20130304-EXPERIMENTAL-i9100g-M2.zip and related gapps the phone was stuck in a bootloop. After 10 minutes I pulled out the battery and plugged it back in. Since then, the phone always booted into recovery automatically. And I'm able to boot into download mode aswell.
But the phone isn't recognized by Odin or any other tool. I've reinstalled the samsung phone drivers serveral times. I tried it with Kies, without Kies, with driver packages from XDA.. Nothing worked. If I remove the battery and hold Vol Down+Home+Power while plugging in the USB cable my PC recognizes some devices but cannot install the driver because after 2 seconds the devices is unplugged again.
I think the battery is too low to establish a USB connection. I will charge the battery tomorrow at work and give it another try.
Any advice for the whole problem? Is it all related to the low battery?
Kind regards
fzninuse
Clean uninstall Kies (your uninstaller pro or similar), then reinstall.
Got a laptop laying around? Try that instead.
gastonw said:
Clean uninstall Kies (your uninstaller pro or similar), then reinstall.
Got a laptop laying around? Try that instead.
Click to expand...
Click to collapse
A clean reinstall of Kies didn't helped.. Even it isn't recognized on another PC. Because I can access recovery mode (CWM) and download mode I guess it's no brick.. just an driver issue?! I tried several USB Ports and USB cables.. nothing helped..
Can it be caused by a wrong kernel? Is it possible to flash a kernel with CWM?
Of course, flash the zip version of the kernel.
Make sure it's neant for I9100G
Sent from the little guy
gastonw said:
Of course, flash the zip version of the kernel.
Make sure it's neant for I9100G
Sent from the little guy
Click to expand...
Click to collapse
Even after flashing another kernel the phone boots directly into recovery..
After trying several ROMs and Kernels I guess it's a bootloader failure.. Because there is no possibillity to flash a new bootloader via CWM and I get no USB connection, I am screwed... =/
No you are not, keep trying.
Other(s) PC might do the trick.
Also get a couple of Odin versions.
Get new cables, genuine s2s that is.
And keep reinstalling kies.
I tried it with another USB cable and connected the phone without the battery. Now I get a "OMAP4430" Device in the device manager which disappears after 2 seconds and reappers 5 seconds later and after 2 seconds it's gone again.. Why the processor is recognized by my PC and not the smartphone itself?!
I will try this: http://forum.xda-developers.com/showthread.php?t=1701471&page=3
Setting up a XP VM right now..
try removing kies completely and install only the drivers
also get a new usb and try connecting to a different port
also do u have ur phone in warranty ?
Hi all,
Please anyone help me!! I flashed 5.0.1. UB Team Roam few days back. My phone's all data lost I don't know how but it lost and even my phone. I want to downgrade but it even doesn't let me to do it. I can enter recovery mode as well download mode. But my phone is not recognized by windows (Its unknown device in device manager). Whenever I plug usb cable the popup comes that usb device has malfunctioned and windows does not recognize it. I have tried all the possible mathod to get it recognize but I am failing everytime.
I have stock firmware downloaded 4.3 and odin ready but I could not flash it due to the problem. Some one on the XDA told me that the file system of Lollipop is different and that's why I am not able to do so, But I am unable to figure out the problem. Please help and suggest what to do...
rawalmaulin said:
Hi all,
Please anyone help me!! I flashed 5.0.1. UB Team Roam few days back. My phone's all data lost I don't know how but it lost and even my phone. I want to downgrade but it even doesn't let me to do it. I can enter recovery mode as well download mode. But my phone is not recognized by windows (Its unknown device in device manager). Whenever I plug usb cable the popup comes that usb device has malfunctioned and windows does not recognize it. I have tried all the possible mathod to get it recognize but I am failing everytime.
I have stock firmware downloaded 4.3 and odin ready but I could not flash it due to the problem. Some one on the XDA told me that the file system of Lollipop is different and that's why I am not able to do so, But I am unable to figure out the problem. Please help and suggest what to do...
Click to expand...
Click to collapse
Flashing a new rom will not remove old user data unless you formatted it completely.
Odin will work only in download mode and you need to right click > Run as Admin.
Enter download mode on your phone and connect your device to PC then flash the stock 4.3
RazorMC said:
Flashing a new rom will not remove old user data unless you formatted it completely.
Odin will work only in download mode and you need to right click > Run as Admin.
Enter download mode on your phone and connect your device to PC then flash the stock 4.3
Click to expand...
Click to collapse
Thanks for reply but I am doing same thing but my phone is not recognized by windows. The popup comes each & everytime that USB device has malfunctioned and windows does not recognize it. So, I could not connect the phone in MTP or PTP mode when the phone is running or even when I put it in download mode and connect to pc. Same error is comming. I have tried the same thing on several PC/Laptop, Tried changing USB Cables god, don't know what to do....:crying:
@rawalmaulin: uninstall KIES & drivers and install the drivers again.
rawalmaulin said:
Hi all,
Please anyone help me!! I flashed 5.0.1. UB Team Roam few days back. My phone's all data lost I don't know how but it lost and even my phone. I want to downgrade but it even doesn't let me to do it. I can enter recovery mode as well download mode. But my phone is not recognized by windows (Its unknown device in device manager). Whenever I plug usb cable the popup comes that usb device has malfunctioned and windows does not recognize it. I have tried all the possible mathod to get it recognize but I am failing everytime.
I have stock firmware downloaded 4.3 and odin ready but I could not flash it due to the problem. Some one on the XDA told me that the file system of Lollipop is different and that's why I am not able to do so, But I am unable to figure out the problem. Please help and suggest what to do...
Click to expand...
Click to collapse
Use mobile Odin until you get it fixed here >> https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro << this will allow you to flash stock without using a pc.
tallman43 said:
Use mobile Odin until you get it fixed here >> https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro << this will allow you to flash stock without using a pc.
Click to expand...
Click to collapse
Thanks for your valueable advice. I will try it today and will be back with result.
I done it but still the phone is not at all recognized
Hello all!
I'm new there but I'm not capable of finding any solution to my problem. I tried on my phone customRom named MysitcOS v6 (for Xaomi redmi note) ported to my device. I got only booting phone without IMEI and baseband unknown. Flashing NVRAM.bin (from stock) using flash tool didnt help. On this rom usb is working fine. When I flashed whole stock rom using sp flash tool including nvram. Almost everything is working well. When I plug usb to phone it charges only and in device manager there are no changes. I must reboot phone wuth usb plugged every time I want establish usb connection. When I flash back Mystic os from recovery USB is working fine again and after every stock rom flash usb doesnt work well. Do you ave any ideas why this happens and maybe how to get rid of this problem? Thanks in advance.
Hello everyone, i need help.
I have tried to root samsung galaxy s3. I was using Odin and it failed :/
Now i can only enter download mode on phone but my PC doesn't detect phone at all. I will try tomorrow other PC and other USB cable, but do you guys have any advice that can help me?
I have installed fresh Win 7, USB drivers and i have tried few versions of Odin and Kies too (it doesn't detect phone either).
emirm990 said:
Hello everyone, i need help.
I have tried to root samsung galaxy s3. I was using Odin and it failed :/
Now i can only enter download mode on phone but my PC doesn't detect phone at all. I will try tomorrow other PC and other USB cable, but do you guys have any advice that can help me?
I have installed fresh Win 7, USB drivers and i have tried few versions of Odin and Kies too (it doesn't detect phone either).
Click to expand...
Click to collapse
If download mode works , then the problem is the usb cable or the samsung driver on the PC , here is the lastest driver , If ODIN 3.10.7 detects the device try to flash TWRP-3.0.2-0 TAR as AP , if it worked reboot in recovery and the rest is up to you witch rom you gonna flash , note this is for custom roms only like CyanogenMod
Thank mate Installed TWRP and CM13, everyhing works well Changed USB cable and managed to get phone detected, quality USB cable makes difference.
If download mode works , then the problem is the usb cable or the samsung driver on the PC , here is the lastest driver , If ODIN 3.10.7 detects the device try to flash TWRP-3.0.2-0 TAR as AP , if it worked reboot in recovery and the rest is up to you witch rom you gonna flash , note this is for custom roms only like CyanogenMod
Click to expand...
Click to collapse
Hi, I have a similar situation, no power, no charge, no download mode, I even connect the USB jig and nothing. Everything happened when trying to restore boot with CWM. After reboot the phone went to hard brick state
jeanca223 said:
Hi, I have a similar situation, no power, no charge, no download mode, I even connect the USB jig and nothing. Everything happened when trying to restore boot with CWM. After reboot the phone went to hard brick state
Click to expand...
Click to collapse
Well the battery is discharged , that's why it doesn't boot , There must be something wrong or with the charger or with the usb cable , most of the time is the cable , after you manage to boot , try to flash TWRP instead CWM
rpdroky said:
Well the battery is discharged , that's why it doesn't boot , There must be something wrong or with the charger or with the usb cable , most of the time is the cable , after you manage to boot , try to flash TWRP instead CWM
Click to expand...
Click to collapse
Thanks for your prompt reply.
I tested the cable and charger in other phones and they work fine. In the other hand the S3 was at 30% by the time I restarted it and never came back to life. Also when I connect it to the PC there is no sign of the S3 on the device manager.
jeanca223 said:
Thanks for your prompt reply.
I tested the cable and charger in other phones and they work fine. In the other hand the S3 was at 30% by the time I restarted it and never came back to life. Also when I connect it to the PC there is no sign of the S3 on the device manager.
Click to expand...
Click to collapse
Try cleaning the S3 usb port , sometimes stuff gets in there and the pin's aren't connecting propedly
HI guys,
I have a problem with my I9300. I tried flash new one TWRP over TWRP Flash image. Something goes wrong and now I am not able to flash anything. Odin and Kies cannot see my phone (unspecified device). I am not able to get into recovery. I am able only to get into download mode and odin mode. Can someone help me with it ?
If Odin can not see the phone, try different usb cables and ports.
I tried a lot of cables (Samsung Original), but no one works. PC detect my phone like unspecified device. I also installed all samsung USB drivers. USB connector has been cleaned. Still nothing works :/
IT works I flashed TWRP via ODIN. Thanks a lot.