hy friends, any of you guys have the blank flash for the motorola moto g8? (XT-2045) the others 'blank flashs' that i used can't reboot my phone on fastboot mode (phone is hard bricked) and i was reading some stuff in internet and found that the blank flash has to have some archives of the ROM specifically and i can't find any blank flash that worked to me.
Version of the ROM
RAV_RETAIL_RPJS31.Q4U-47-35-15_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
@itnfp Thread closed as duplicate of
using blank flash to go on fastboot didn't work and device stay with a black screen
Can anyone help? i recently bricked my phone (hardly) and when i was trying to recover it using blank flash some things don't occur like planned. pc recognizes the phone with qualcomm drives but when i load the blank flash and it is a success on...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5, post only ONCE amd post in already existing threads instead of creating new ones. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Related
Hi Guys,
i have been trying to unlock bootloader on my Doogee S55 phone, i have some experience with rooting phones.
But this thing.... i downloaded all the drivers for that phone all around the internet,,
when its normaly turned on, ADB command line recognise it, but when i boot to Fastboot using command (or manualy with power+voldown buttons, doesnt matter) it shows in device manager as unknown device, and when i input command to unlock bootloader it show just waiting for device, and when i input command to show connected devices nothing shows up (in fastboot, when booted normaly the device shows up fine)
my only possible explanation is that i dont have a right driver for ADB and this phone to communicate. but in instaled a tryed so many of them for span of several hours and days
i have instale minimal ADB and Fastboot, i have google drivers that comes with it and bunch of drivers for this phone nothing work
BigKjju said:
Hi Guys,
i have been trying to unlock bootloader on my Doogee S55 phone, i have some experience with rooting phones.
But this thing.... i downloaded all the drivers for that phone all around the internet,,
when its normaly turned on, ADB command line recognise it, but when i boot to Fastboot using command (or manualy with power+voldown buttons, doesnt matter) it shows in device manager as unknown device, and when i input command to unlock bootloader it show just waiting for device, and when i input command to show connected devices nothing shows up (in fastboot, when booted normaly the device shows up fine)
my only possible explanation is that i dont have a right driver for ADB and this phone to communicate. but in instaled a tryed so many of them for span of several hours and days
i have instale minimal ADB and Fastboot, i have google drivers that comes with it and bunch of drivers for this phone nothing work
Click to expand...
Click to collapse
@BigKjju
Please read the guidances that are stuck on top of every forum prior to your next posting like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
I've moved the thread to Q&A.
Regards
Oswald Boelcke
Senior Moderator
Oswald Boelcke said:
@BigKjju
Please read the guidances that are stuck on top of every forum prior to your next posting like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
I've moved the thread to Q&A.
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
thank you very much, this forum helped me many times over the years, this is the first time iam posting, and i am really angry at that phone please accept my apology and i promise i will do better next time
Hey colleagues,
I've a hardware device (no phone) that includes some kind of a MediaTek tablet with a MT8167 and Android 8.1 installed on it.
Currently I try to enable ADB in order to intercept some network traffic flows with custom apps I'd like to install.
Unfortunately the device is running a System.User App with no chance to escape.
I was able to dump the entire memory including all partitions. Then I tried to change the default props (adb enable, etc...) in the img and did a re-flash. The device boots into safe mode - but is stuck there.
I've seen that dm-verity is enabled / Android Verified 1.0 (not 2.0). So I tried to magisk on another arm Device and updated the boot.img. Unfortunately that lead to an ininite boot loop.
Do you guys have any other ideas?
I've physical access to the device and I am able to flash images back to the device.
Any help would be appreciated.
Osral
Osral said:
Hey colleagues,
I've a hardware device (no phone) that includes some kind of a MediaTek tablet with a MT8167 and Android 8.1 installed on it.
Currently I try to enable ADB in order to intercept some network traffic flows with custom apps I'd like to install.
Unfortunately the device is running a System.User App with no chance to escape.
I was able to dump the entire memory including all partitions. Then I tried to change the default props (adb enable, etc...) in the img and did a re-flash. The device boots into safe mode - but is stuck there.
I've seen that dm-verity is enabled / Android Verified 1.0 (not 2.0). So I tried to magisk on another arm Device and updated the boot.img. Unfortunately that lead to an ininite boot loop.
Do you guys have any other ideas?
I've physical access to the device and I am able to flash images back to the device.
Any help would be appreciated.
Osral
Click to expand...
Click to collapse
@Osral
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to Android Q&A. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Hello guys, today I will explain how to recover a dead phone in EDL mode
Only for international devices, do not apply this to Chinese devices
-----------------------------------------------------------------------------------
Update 12.5.538 solves the problem of the 5G network
1-Download Qualcomm Tool 9008 : install After installation restart your computer
-------------------------------------------------------------------------------------
2-Download the official ROM for the phone 12.5.538 : install
-------------------------------------------------------------------------------------
3-download tool QPST : install
-------------------------------------------------------------------------------------
4-Extract the contents of the ROM to the C disk
-------------------------------------------------------------------------------------
5-Go to the path of the tool as shown in the video
-------------------------------------------------------------------------------------
6-Press the volume down button and the volume up button together and plug the wire into the side port of the phone
-------------------------------------------------------------------------------------
7-Go to the device manager option on the computer, make sure that everything is OK and that the phone is connected to the com port 9008
--------------------------------------------------------------------------------------
8-Go to the tool as shown in the video and choose the port number in the box and apply what is mentioned in the video
--------------------------------------------------------------------------------------
9-Click on the word download and wait for the device to turn on
-------------------------------------------------------------------------------------
10-DONE
----------------------------------------------------------------------------------
educational video:::: ((((VIDEO))))
@-VEDMETA- My fellow @Oswald Boelcke already advised you to put such thread where it belongs in the "Guides" section, as it doesn't qualify for development.
I've moved the thread but this will be the last time we warn you about this.
For further information, please refer to the guidances and announcements that are stuck at the top of every forum and that I suggest to thoroughly study prior to your next posting like this one:
[INFO] Device Forum Rules (Please Read before Posting)
Regards
DaReDeViL
XDA Moderation staff
DaReDeViL said:
@-VEDMETA- My fellow @Oswald Boelcke already advised you to put such thread where it belongs in the "Guides" section, as it doesn't qualify for development.
I've move the thread but this will be the last time we warn you about this.
For further information, please refer to the guidances and announcements that are stuck at the top of every forum and that I suggest to thoroughly study prior to your next posting like this one:
[INFO] Device Forum Rules (Please Read before Posting)
RegardsDaReDeViL
XDA Moderation staff
Click to expand...
Click to collapse
I'm new to the site and I don't think I wrote the topic in the development section next time I will make sure of this, thank you
-VEDMETA- said:
... I don't think I wrote the topic in the development section ...
Click to expand...
Click to collapse
I wouldn't be here if it wasn't the case.
Anyway, thank you for your collaboration.
You can use the tool provided by Motorola (owner of Lenovo) to recover the device!
rescue-and-smart-assistant - Motorola
#hellomoto | Discover our new unlocked Android phones from motorola and stay informed about our offers and promotions.
www.motorola.com
Way simpler to use this and fail safer too
I have a question, how to deal with the Qualcomm crashdump mode?
-VEDMETA- said:
Hello guys, today I will explain how to recover a dead phone in EDL mode
Only for international devices, do not apply this to Chinese devices
-----------------------------------------------------------------------------------
Update 12.5.538 solves the problem of the 5G network
1-Download Qualcomm Tool 9008 : install After installation restart your computer
-------------------------------------------------------------------------------------
2-Download the official ROM for the phone 12.5.538 : install
-------------------------------------------------------------------------------------
3-download tool QPST : install
-------------------------------------------------------------------------------------
4-Extract the contents of the ROM to the C disk
-------------------------------------------------------------------------------------
5-Go to the path of the tool as shown in the video
-------------------------------------------------------------------------------------
6-Press the volume down button and the volume up button together and plug the wire into the side port of the phone
-------------------------------------------------------------------------------------
7-Go to the device manager option on the computer, make sure that everything is OK and that the phone is connected to the com port 9008
--------------------------------------------------------------------------------------
8-Go to the tool as shown in the video and choose the port number in the box and apply what is mentioned in the video
--------------------------------------------------------------------------------------
9-Click on the word download and wait for the device to turn on
-------------------------------------------------------------------------------------
10-DONE
----------------------------------------------------------------------------------
educational video:::: ((((VIDEO))))
Click to expand...
Click to collapse
I have a question, how to deal with the Qualcomm crashdump mode?
masterouch said:
I have a question, how to deal with the Qualcomm crashdump mode?
Click to expand...
Click to collapse
flash persist.img file. But fingerprint sensor will not work anymore because you broke your original persist files
recently my moto 5g stylus (xt2131-1) got stuck on something like a boot loop, it would start up and freeze on the needlessly animated moto logo. i exhausted the recovery options and was forced to factory reset to un-brick it loosing (possibly up to 100>/ 250gb) data. hoping that like a micro sd card there might still be 'ghost copies' of the data i plugged it into laptop and tried laptop recovery softwares (tried w/ wo usb debugging on), which failed to discover anything. then at the risk of corrupting the 'ghost data' reluctantly installed and ran android recovery apps which only detected new files intentionally-deleted to test their capabilities. im unaware of any other options other than to root my phone in an attempt to have it recognized by my laptop as another external hard drive to scan for 'ghost files'...aside from the handfull of recovery apps no new data was written over the (original data). ANYONE KNOWLEGEABLE IN ROOTING AND RECOVERY ANY HEADS UP OF WHETHER OR NOT THAT'LL WORK WILL BE GREATLY APPRECIATED
SINCERELY_FKD said:
recently my moto 5g stylus (xt2131-1) got stuck on something like a boot loop, it would start up and freeze on the needlessly animated moto logo. i exhausted the recovery options and was forced to factory reset to un-brick it loosing (possibly up to 100>/ 250gb) data. hoping that like a micro sd card there might still be 'ghost copies' of the data i plugged it into laptop and tried laptop recovery softwares (tried w/ wo usb debugging on), which failed to discover anything. then at the risk of corrupting the 'ghost data' reluctantly installed and ran android recovery apps which only detected new files intentionally-deleted to test their capabilities. im unaware of any other options other than to root my phone in an attempt to have it recognized by my laptop as another external hard drive to scan for 'ghost files'...aside from the handfull of recovery apps no new data was written over the (original data). ANYONE KNOWLEGEABLE IN ROOTING AND RECOVERY ANY HEADS UP OF WHETHER OR NOT THAT'LL WORK WILL BE GREATLY APPRECIATED
Click to expand...
Click to collapse
Hello and good afternoon, @SINCERELY_FKD
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
i installed lsexposed magisk module which sent fine but then i installed Xposed-Disable-FLAG_SECURE_2.0.0.apk that caused the bootloop
i tried getting my phone into lineage safe mode (holding down volume button) i dont know if this is hte correct way to achieve it but i didnt get into a safe mode
and for some reason on 2 laptops i've tried (lenovo t480 ubuntu 22.04.2 and Lenovo t14 gen 1 ubuntu 23.04) i couldnt connect to adb when i enabled adb in lineage recovery
anyone have any suggestions? im pretty desperate because i really dont want to reinstall
latumus said:
i installed lsexposed magisk module which sent fine but then i installed Xposed-Disable-FLAG_SECURE_2.0.0.apk that caused the bootloop
i tried getting my phone into lineage safe mode (holding down volume button) i dont know if this is hte correct way to achieve it but i didnt get into a safe mode
and for some reason on 2 laptops i've tried (lenovo t480 ubuntu 22.04.2 and Lenovo t14 gen 1 ubuntu 23.04) i couldnt connect to adb when i enabled adb in lineage recovery
anyone have any suggestions? im pretty desperate because i really dont want to reinstall
Click to expand...
Click to collapse
Hello and good afternoon, @latumus Welcome to XDA! I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to General Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
sorry for posting in wrong forum.
tried adb on windows 11 and macos now too no response on any (2 different cables)
2 broken usb cables what are the odds everything sorted now