((Questions & Answers)) for Realme 7 (RMX2155) Android 12 Realme UI 3.0+magisk manager Root --Without TWRP- ((Edit) 2022-08-03 - Realme 7 Questions & Answers

the following GUIDE IS under modification ​(only for editing)​If you see anything unstable just comment on it​if you have any questions/suggestions​Go to the comments section​A new version of this guide will make it even simpler
and fix any errors
The link to the new stable guide is here:
[GUIDE] REALME 7 RMX2155 GLOBAL Android 12 Realme UI 3.0 ((MAGISK MANAGER ROOT WITHOUT TWRP))
Hello! ALL! a good way that will help everyone trying rooting ----Realme 7 (RMX2155)---- Realme UI 3.0 based on Android 12 (RMX2155_11_F.07) version recently released For Realme 7 +magisk Manager Root...
forum.xda-developers.com
((Edit)) a good way that will help everyone trying rooting ((Edit)) ​----Realme 7 (RMX2155)----​ Realme UI 3.0 based on Android 12 ​(RMX2155_11_F.07) version recently released​For Realme 7​+magisk Manager Root
=======================================================================
small copey from only red line words down below​: https://forum.xda-developers.com/t/guide-realme-7-rmx2155-global-bootloader-unlock.4265055/
============================​I AM NOT LIABLE FOR ANY DAMAGES, BRICKED PHONES, OR ANYTHING ELSE THAT HAPPENS. IT IS YOUR CHOICE TO FOLLOW THIS GUIDE, AND THE CONSEQUENCES ARE YOUR RESPONSIBILITY. ​
============================​================​ I will Call this ''Guide method'' kind of Beta!? because I still not sure if its going to work for you
unless you know what you are doing and knowing!
and following the steps carefully!!!
=================​Hello Guys​I found a Good way to root your ​Realme 7 (RMX2155)​--(Without TWRP/Custom recovery)--
My phone is Realme 7
Model: RMX2155
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if You already unlocked the bootloader using this Awesome method : ​https://forum.xda-developers.com/t/guide-realme-7-rmx2155-global-bootloader-unlock.4265055/
After You have unlocked the bootloader
You must update Your phone to:
Realme UI 3.0 based on Android 12
(RMX2155_11_F.07-version recently released)
First method only for who is not receiving any updates from Realme
otherwise if you convert your RMX2155 to RMX2151 because of use for unlocking the bootloader
you can't try this method unless you get back to RMX2155 stock ROM
and to get back to RMX2155 after you've converting it to rmx2151
you must download the OTA file of RMX2155 EU
from here:
https://www.realme.com/eu/support/software-update#
(you can use this only if you stuck with Android 10 RMX2151 ON YOUR RMX2155)
scroll down until you see the following
Realme 7
realme UI 1.0
Version:RMX2151EU_11.A.88Update log
Release time:07/07/2021
Size:3.12GB
md5:3F92064E7AF8B95784E6C3AB60FC5E74
don't be confused by version number (RMX2151EU_11.A.88 update log)
this is just basic name of the phone RMX
this OTA update is (EU) Europe version (2155)
you can now turn off your phone and go to recovery mod (the stock one and not custom)
and Install the OTA update that I provide from the link up below
what ever version of RMX2151 installed on your RMX2155 in case to unlock bootloader
using this method :
https://forum.xda-developers.com/t/guide-realme-7-rmx2155-global-bootloader-unlock.4265055/
whatever you did after unlocking bootloader, get everything back to normal to (RMX2155)
don't forgot also to get back the carrier to its normal serves
after you had to dial and convert to Vietnam or India/
try this after unlocking the bootloader and in the rmx2151 version and before you convert back to rmx2155 by the OTA file I provided or if you already have other way that will help you convert back to RMX2155
you still can flash RMX2155 FULL Stock ROM
with unlocked bootloader! rather than using the OTA file
and that can help you skip half of this GUIDE method!
everything should be good to get updates--after getting back to RMX2155
the goal here is to update the phone to android 12
but again.. make sure your phone bootloader is unlocked from the past!
so you can Install Root
and TWRP but for TWRP
I think you must wait for it so they can make stable one
for Android 12 on Realme 7 ​I didn't try to Install TWRP because it may will break my phone but if you
don't want android 12 and you only want everything custom (root/twrp/other)
I recommend to stay in android 10
and not following this method
but I also recommend to
upgrade to android 12 realme UI 3.0
because they fixed many things and the HDR future and improve battery life
and for me I think the new version
is better than android 11 RUI 2.0 and every
custom rom
and it came officially!!!
if you didn't know about realme UI 3.0 futures go read about it and
I recommend to make some researches before start!​
lets start!///.....
after you went back to RMX2155rom you can continue from below down here so you can get to android 12 (only if you're not receiving any updates)
I heard many people are talking about not getting any updates there In RMX2155 and they seem to be stuck with Android 10
(but still... make sure you went back to RMX2155 to continue this method)
use VPN​If you have this problem (I was having it too)
It must be used in the application called (Psiphon Pro)
You can get it from the Google Play Store:
Psiphon - Apps on Google Play
Access Everything on the Open Internet with Psiphon
play.google.com
After downloading the app
Choose a country: United Kingdom
Only if you live in North/South America/..etc.
If you already live within Europe, you should choose your European country if the VPN app below offers it if not just make your way with a UK VPN
After turning on the VPN and following the instructions below
Go to your phone Settings / Applications / Manage Applications
And click on the upper right corner at the three dots
(Click Show system apps)
And look for a software update system application
Tap on it and clear data and cache
(But before all make sure your VPN is turned on)
(This is a very important step)
After that, go ahead and check if there are any updates available
(You should find all updates!! It should work for you!)
(Because it works with my RMX2155
I'm already on android 12 Realme UI 3.0 very officially!
After and after and after the move!
The second step is to root your RMX2155!!!
How ?? ...
well it was very scary but ....%100% Worked for Me!
I am very happy... and you will be if you follow everything carefully​
before start check this:
1--make sure the bootloader is Unlocked
2-- make sure your phones as IS Actually Realme 7 (only for RMX2155 Model )
3-- make sure you're In Android 12 Realme UI 3.0
(-RMX2155_11_F.07 Recently Released!-)-
4--PC with ADB and Fastboot installed
Let's start now! (Installing ROOT! (using Magisk manager)
STEP 1 : Download Magisk Manager and Installing it on your Realme 7 (RMX2155)
STEP 2 : Download the following Files on your Computer
Download LINKS​file 1 (stock boot.img)-- android 12 RUI 3.0 :
(RMX2155 boot.img) : https://drive.google.com/file/d/1gjqUbiNMu73sJ-87cM5GG8alhN2fJYHY/view?usp=sharing
I can sure to you that the boot.img is %100000 for Realme 7 model : RMX2155 based from android 12 RUI 3.0
I had hard time to get it, Especially when I had to use unsafe tools to extract it​file 2 adb-platform-Tools : https://drive.google.com/file/d/1QkxzvUKkQZncVRJbSoyeqvV96cEp4bmG/view?usp=sharing
watch this video so u know how to install adb platform on your PC :
file 3 I have already patched boot.img with magisk for RMX2155
this is the link : https://drive.google.com/file/d/1uw1EVVlMypRtF2FMUxB3XTytrvFUiPi6/view?usp=sharing
you can directly flashing the patched Magisk boot.img to your phone Now! (without TWRP)
the steps of installing ROOT ON Realme 7 (RMX2155)
Android version : 12
Realme UI 3.0​first method does not need root, and also does not require a custom recovery. boot.img is a must.
1. Open Magisk Manager
2. Press Install > Install > Patch Boot Image File, and select your boot.img file
3. Magisk Manager will now patch your boot image, and store it in Internal Storage/Download/patched_boot.img
4. Copy the patched boot image to your PC. Place it in Minimal ADB & Fastboot directory.
5. Flash the patched boot image to your device. Here is the command :
Fastboot flash boot boot.img
6. If adb say "Okay" twice, mean it successfully.
Type : Fastboot reboot
7. Wait your phone to reboot.
8. DONE! Congratulations! Root access is properly installed on this device!
My Notes-!​\\--if you have RMX2151 there is other option you can try--
idk maybe same this method but different files
\\--I am sure there is a lot ways for RMX2151 but the problem Now is only in the RMX2155 version
\\--As you know I have to tell you I tried A lot to unlock the bootloader many times
\\--by following this Guide method to unlock bootloader for RMX2155:
https://forum.xda-developers.com/t/guide-realme-7-rmx2155-global-bootloader-unlock.4265055/
---\big thanks To them and who did it Thank you so much!/---
--for helping me unlocking the bootloader on My RMX2155--
-After this Long Time-
and those down here are if You want to know About or having problems!!!?
if you asked me about vbmeta.img and u confused about it
I can only tell you that I didn't used it
if you also facing problem with Fastboot devices Not Detected
and your phone Auto connect/reconnecting in the computer
this video is for You!
if you don't have computer to flash and type in the cmd
you can try 2nd phone to flash
watch this video to learn how :
files you may want!?​file 1-- if you need the Realme 7 RMX2155 firmware I used it to make a scatter file
((still some scatter files are missing! inside it it maybe because of the junk tools I used))
however I only want it the boot.img inside it nothing else
here is link to download the firmware if need :
https://drive.google.com/file/d/1LuUcOGdZZ5CD4xWwSm7vvR0-r8TpsRFF/view?usp=sharing
File 2-- if you need the scatter file that I made from junk tool here is link :
RMX2155 android 12 RUI3.0 (scatter file)-not full.zip
drive.google.com
(Only file 2)-- Password of the scatter file is : Y7-YOUSSEF-F7
if you want to extract the boot.img (but no need too!
because I already shared the boot.img of RMX2155
this is only if you had a different Realme 7 model
I still don't recommend and if any one can make a suggest please do
and if you have different method of extracting boot.img please tell
because the following method is kind of unsafe
( if u need to extract the boot.img of your phone and you have different Realme 7 model you can visit :
Realme 7--Models--firmware Link :
Realme 7 Firmware (RMX2151, RMX2155, RMX2163) - Realme Firmware
Realme 7 Firmware (RMX2151, RMX2155, RMX2163) Official Flash File (Stock ROM). flash your phone using realme flashtool or MSM Download tool.
realmefirmware.com
if you want to extract the firmware to scatter file
the scatter file will be missing some files
do not worry if you only need the boot.img the scatter file you extracted will include it
I am not responsible of any damage
if you have different method to extract the firmware files please used it if its safe
because I don't recommend this method down here
Start----------The following information only if you want to extract the boot.img to your phone device----------Start
watch this video to know how to get the boot.img from these type of files
there is one problem may get your pc in trouble!
the tools provide it from this guy in the video are unsafe
to use the tools provided from the video
make sure you don't have any of personal information or banking
or other important data!!!
I suggest not using your main computer!
and when using the tools disable Windows Defender Security
otherwise the tools will not Run
however if u decide to use this video method
I would recommend those videos also to watch just in case if anything happen to your pc just like what happen to mine
I used them to solve the thread (malware) I was facing If you had one- these videos are for You
first video :
secound video :
secound video you must first use the tools from the first video
the secound video only if you had Windows defender futures are disabled or notworking and can't be enabled
I don't like this video ( ''
'' )
however the junk tools from the video was attacked my pc but...
I also got the boot.img and I was not sure about it but I tested it and its ​completely safe and working with RMX2155
​only the tools provide the thread and not the boot.img that I extracted from these
​END----------type of junk tools----------END
​
MY OLD keywords ( before edit
₱ⱠɆ₳₴Ɇ ⱧɆⱠ₱ ₥Ɇ ₮Ø ₲Ɇ₮ ₮₩Ɽ₱/₵Ʉ₴₮Ø₥ ⱤɆ₵ØVɆⱤɎ, ł ₦ɆɆĐ ł₮ ₮Ø ł₦₴₮₳ⱠⱠ ⱤØØ₮ ₳₦Đ ₥₳Ɏ฿Ɇ ₵Ʉ₴₮Ø₥ ⱤØ₥₴ ł₦ ₣Ʉ₮ɄⱤɆ ₱ⱠɆ₳₴Ɇ ł₣ ₳₦ɎØ₦Ɇ ₭₦Ø₩₴ ₳₦Ɏ₮Ⱨł₦₲ ₳฿ØɄ₮ ł₮ ₱ⱠɆ₳₴Ɇ ł₣ ₮ⱧɆⱤɆ'₴ ₳ ₩₳Ɏ ₩ł₮ⱧØɄ₮ ĐØ₩₦₲Ɽ₳ĐɆ ₳₣₮ɆⱤ ₳ⱠⱠ ₮ⱧɆ₴Ɇ Ʉ₱Đ₳₮Ɇ₴ ₵₳₥Ɇ ₥Ɏ Ø₮ⱧɆⱤ QɄ₳₴₮łØ₦ ł₴ ₮Ⱨ₳₮ ł ₭₦Ø₩ ₮ⱧɆɎ ₳ⱠⱤɆ₳ĐɎ ₥₳ĐɆ ₳ ₮₩Ɽ₱/₵Ʉ₴₮Ø₥ ⱤɆ₵ØVɆⱤɎ ₣ØⱤ ₥Ɏ ₱ⱧØ₦Ɇ ฿Ʉ₮ ł₮'₴ JɄ₴₮ ₣ØⱤ ₮ⱧɆ ₲ⱠØ฿₳Ⱡ VɆⱤ₴łØ₦!? ₩Ⱨł₵Ⱨ ł₴ Ɽ₥Ӿ2151 ฿Ʉ₮ ₩łⱠⱠ ł₮ ₩ØⱤ₭ ₣ØⱤ Ɽ₥Ӿ2155 (ł ₳ⱠⱤɆ₳ĐɎ Ʉ₦ⱠØ₵₭ɆĐ ₮ⱧɆ ฿ØØ₮ⱠØ₳ĐɆⱤ Ø₦ ł₮) ₥Ɏ ⱤɆ₴Ɇ₳Ɽ₵Ⱨ ₣ØⱤ ₮₩Ɽ₱ ₩₳₴ ₲Øł₦₲ ₮Ø ⱧɆⱤɆ : Ⱨ₮₮₱₴://₮₩Ɽ₱.₥Ɇ/ ₳₦Đ ₮Ø : [ɄⱤⱠ Ʉ₦₣ɄⱤⱠ="₮ⱤɄɆ"]Ⱨ₮₮₱₴://₮₩Ɽ₱.₥Ɇ/ⱤɆ₳Ⱡ₥Ɇ/ⱤɆ₳Ⱡ₥Ɇ6.Ⱨ₮₥Ⱡ[/ɄⱤⱠ] (₮₩Ɽ₱ ₣ØⱤ ⱤɆ₳Ⱡ₥Ɇ 6/7) ฿Ʉ₮ ł ₳₥ ₦Ø₮ ₴ɄⱤɆ ł₣ ₮Ⱨł₴ ₲Ø₦₦₳ ₩ØⱤ₭ ₣ØⱤ ₥Ɏ ₳₦ĐⱤØłĐ 12 ⱤɆ₳Ⱡ₥Ɇ Ʉł 3.0 VɆⱤ₴łØ₦ ₳₦Đ ł₣ ɎØɄ ⱠØØ₭ ₳₮ ₮ⱧɆ ₮₩Ɽ₱ VɆⱤ₴łØ₦ ł₮'₴ 3.5.2 ₩Ⱨł₵Ⱨ ₭ł₦Đ ₵₳₦ ₩ØⱤ₭ Ø₦ⱠɎ ₣ØⱤ ₳₦ĐⱤØłĐ 10 ₳₦Đ ₥₳₳ɎɎɎ฿Ɇ 11!? łĐ₭ ฿Ɇ₵₳Ʉ₴Ɇ ₳₴ ł ₭₦Ø₩ ₮ⱧɆɎ ₴₮łⱠⱠ ₩ØⱤ₭ł₦₲ ₮Ø ₴Ʉ₱₱ØⱤ₮ ₳₦ĐⱤØłĐ 12 ฿Ʉ₮ ₩łⱠⱠ ₮ⱧɆɎ ⱤɆ₳Ⱡ₳₴Ɇ ł₮ ₮Ø ⱤɆ₳Ⱡ₥Ɇ 7 ฿₳₴ɆĐ ₳₮ ₮ⱧɆ Ⱡ₳₴₮ Ʉ₱Đ₳₮Ɇ??? ₳Ⱡ₴Ø ł₣ ɎØɄ ⱠØØ₭ ₳₮ ₮ⱧɆ ₵ØĐɆ ₦₳₥Ɇ ł₮'₴ Ø₦ⱠɎ ₣ØⱤ Ɽ₥Ӿ2001/Ɽ₥Ӿ2151 ฿Ʉ₮ ₳ⱤɆ ₮ⱧɆɎ Ʉ₴ł₦₲ ₴₳₥Ɇ ₣łⱠɆ ₣ØⱤ ⱤɆ₳Ⱡ₥Ɇ 6 ₳₦Đ 7..... ł₣ ₴Ø ₥ł₦Ɇ ł₴ ⱤɆ₳Ⱡ₥Ɇ 7 ₥ØĐɆⱠ Ɽ₥Ӿ2155 ₩łⱠⱠ ł₮ ₳Ⱡ₴Ø ₩ØⱤ₭!? ₳₦Đ ł ⱠØØ₭ ₳₮ ØⱤ₳₦₲Ɇ₣ØӾ ₮₩Ɽ₱ ₮ⱧɆɎ ₴ɆɆ₥₴ ĐłĐ₦'₮ ₲łVɆ ₴Ʉ₱₱ØⱤ₮ ₮Ø ₳₦ĐⱤØłĐ 12 ₳Ⱡ₴Ø ɎɆ₮ ₮ⱧɆ ₳₦ĐⱤØłĐ VɆⱤ₴łØ₦ ł ₳₥ Ʉ₴ł₦₲ ł₴ ₳₦ĐⱤØłĐ 12 ⱤɆ₳Ⱡ₥Ɇ Ʉł 3.0 ₮ⱧɆ Ø₣₣ł₵ł₳Ⱡ VɆⱤ₴łØ₦ ₣ØⱤ Ɽ₥Ӿ2155 ฿Ʉ₮ ł ĐØ₦'₮ ₭₦Ø₩ ł₣ ł ⱤɆ₳ⱠⱠɎ Ⱨ₳VɆ ₮Ø ĐØ₩₦₲Ɽ₳ĐɆ ₮Ø ₳₦ĐⱤØłĐ 10/11 ₮Ø ₲Ɇ₮ ₮ⱧɆ ₮₩Ɽ₱ ł₦₴₮₳ⱠⱠɆĐ! ØⱤ ₥₳Ɏ฿Ɇ ɆVɆ₦ ⱤɆ₵Ⱨ₳₦₲Ɇ ₮ⱧɆ Ɽ₥Ӿ2155 ₮Ø 2151 ₮Ø ₲Ɇ₮ ł₮ ₩ØⱤ₭ ł ₳₥ ₳₣Ɽ₳łĐ Ø₣ ₮Ⱨ₳₮! ₱ⱠɆ₳₴Ɇ ₲łVɆ ₥Ɇ ɎØɄⱤ ₳ĐVł₵Ɇ! ₳₦Đ ₮Ⱨ₳₦₭ ɎØɄ;

I HAVE SWITCHED TO Version:RMX2151EU_11.A.88
WHAT TO DO NEXT EVERYTHING IS WORKIGN FINE BUT NOT RECIEVING ANDROID 12 13 UPDATES WHAT SHOULD I DO ?
SHOULD I SWITCH CALL SERVE HOW DO I DO IT??
i live in india you havent mentioned anything for india .? ? ..?

Raghav. said:
I HAVE SWITCHED TO Version:RMX2151EU_11.A.88
WHAT TO DO NEXT EVERYTHING IS WORKIGN FINE BUT NOT RECIEVING ANDROID 12 13 UPDATES WHAT SHOULD I DO ?
SHOULD I SWITCH CALL SERVE HOW DO I DO IT??
i live in india you havent mentioned anything for india .? ? ..?
Click to expand...
Click to collapse
Was your phone originally RMX2155 or 2151 !?
The whole guide method was only for the version RMX2155
And what I mean,
for those who went to convert the RMX2155 to RMX2151,
So they could unlock the bootloader from version 2151
but after words, they should be able to convert back to there original model (RMX2155) fully, and everything should be good to get All the updates
and continue the guide method for how to install root
I may think you didn't get the updates because your phone originally is RMX2151 and not RMX2155?
This case happen to me before when I was decided to stay in RMX2151 and my phone originally is RMX2155 and I wasn't able to get OTA updates in the RMX2151
Not sure why.. but it has to do with the phone software I guess, at the end I convert back to my original model ( RMX2155 ) and here I was able to get All the updates
Try check your phone model number
If your phone is originally is RMX2151
I recommend to convert to your original model
And I think you're good to get All the updates
If your phone is originally RMX2155
Try check again for updates, use VPN
Hope this helps
Please check back!

Y-YoUsSef-F said:
Was your phone originally RMX2155 or 2151 !?
The whole guide method was only for the version RMX2155
And what I mean,
for those who went to convert the RMX2155 to RMX2151,
So they could unlock the bootloader from version 2151
but after words, they should be able to convert back to there original model (RMX2155) fully, and everything should be good to get All the updates
and continue the guide method for how to install root
I may think you didn't get the updates because your phone originally is RMX2151 and not RMX2155?
This case happen to me before when I was decided to stay in RMX2151 and my phone originally is RMX2155 and I wasn't able to get OTA updates in the RMX2151
Not sure why.. but it has to do with the phone software I guess, at the end I convert back to my original model ( RMX2155 ) and here I was able to get All the updates
Try check your phone model number
If your phone is originally is RMX2151
I recommend to convert to your original model
And I think you're good to get All the updates
If your phone is originally RMX2155
Try check again for updates, use VPN
Hope this helps
Please check back!
Click to expand...
Click to collapse
my phone model is 2151 but i didnt recieved any updates in 2151 rom also

Raghav. said:
my phone model is 2151 but i didnt recieved any updates in 2151 rom also
Click to expand...
Click to collapse
Still not able to receive updates?

Related

Realme X50 Pro Players Edition (RMX2072) CN Version Android 11 Beta Release

The adaptation of Realwo X50 Pro Player Edition to Android 11 Beta 1 (Android R) has been completed.
This version is only for developers who need it for browsing experience, and does not have the ability to continuously update, so ordinary real fans are not recommended for daily use.
Your Realme X50 Pro player version (RMX2072) needs to be upgraded to a specific Android 10 (Android Q) benchmark version before it can be swiped to Android 11 Beta 1 (Android R).
At the same time, we have also prepared a card swiping package for the real me X50 Pro player version to swipe Android 10 back for use after the experience is completed.
Before the experience, please read the following precautions carefully:
risk warning:
1. Make sure that your model is Realme X50 Pro Player Edition (model RMX2072);
2. This version is only for application developers, and only for compatibility testing and early development. This version has different stability and performance issues on all devices and is not suitable for daily use on mobile phones, especially for ordinary real fans who are not developers;
3. On the beta version of Android 11 beta 1, some applications may not work properly. This includes Google apps and other apps;
4. After the device is flashed into the Android 11 developer preview version, the user data of the device will be cleared. Before flashing, please make sure that your personal data has been backed up: Settings -> Other Settings -> Backup and Restore -> Backup and Restore, select Please copy the data to be backed up to an external storage device after the backup is completed;
5. Reverting from Android 11 version to Android 10 version will clear the user data of the device. Please make sure that your data has been backed up before reverting;
6. This upgrade needs to first upgrade to the benchmark version of Android 10
(RMX2071_11_OTA_0200_all_1w62iExuuCpj.ozip), then you can upgrade to the Android11 ​​version (RMX2072_UpdateBack2Android10_V200704.ozip)
Flashing steps:
1. First back up important mobile phone data to a network disk or computer;
2. Download the Android 10 benchmark version firmware package and Android 11 experience version firmware package to any folder on the phone;
3. Find the Android 10 benchmark firmware package in the phone folder, and click install;
4. (This step will clear all the phone data) Turn off the phone after successful installation. After shutting down, press and hold the "power button" and "volume down button" to enter the recovery mode, follow the on-screen instructions, select the installation upgrade file, find the Android 11 experience version firmware package, and click install;
5. Do not click any button on the phone during the installation process, the phone will be successfully upgraded to Android 11 Beta 1 after automatic restart.
common problem:
Q: Does the card support X50 Pro 5G?
A: Not supported. Realme X50 Pro 5G's (RMX2071) Android 11 beta 1 adaptation, please go here https://www.realmebbs.com/post-details/1278168964924452864
Q: Will my mobile phone data be cleared after flashing?
A: Yes. Please backup important data before flashing
Q: Is this Android 11 Beta 1 based on realme UI 1.0?
A: Yes
Q: After flashing to Android 11 Beta 1, can I continue to receive updates?
A: No. You need to go back to the A.20 version provided below before you can receive the push normally
Q: Will there be bugs in Android 11 Beta 1 this time?
A: There will be some. Including some system functions are unavailable, some third party App icon interface is not beautiful enough, some apps may not run, and system stability is reduced
Q: How to flash back to Android 10 (Android Q)?
A: Download the standard version of A.20 (realme UI 1.0) below (card swipe package) to any folder of the phone, click the card swipe package directly in the phone file management, and continue in the pop-up prompt clear data dialog box Click OK, the phone will automatically restart and restore to the standard A.20 version.
Flashing information:
Realme X50 Pro player version back to A.20 (realme UI 1.0) standard version (card package) download:
Link: https://bit.ly/2WUkWwu
Realme X50 Pro player version back to A.20 (realme UI 1.0) DECRYPTED standard version (card package) download:
Link: https://bit.ly/2OUypQH
Realme X50 Pro player version Android 11 Beta 1 (Android R) experience version (card swiping package) download:
Link: https://bit.ly/2WX6IuS
If you encounter problems during the experience, please leave a message and feedback under this post, and we will check it carefully.
"Note: hope we can create TWRP for this Version or we can have Stock Recovery.img"
i provided the files needed please let's help each other
i managed to cook Stock recovery.img,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Work in 2075?
I don't really know what the nickname of the x50 pro is ... I don't know if it's 2075
It only Works in RMX2072
kuto232 said:
Work in 2075?
I don't really know what the nickname of the x50 pro is ... I don't know if it's 2075
Click to expand...
Click to collapse
no, it will work only in rmx2072, bec they have different recovery.img so once you flash it you will experience bootloop.
Guys, can i flash the EU rom of RMX2071 onto my RMX2072 ?
Guys, can i flash the EU rom of RMX2071 onto my RMX2072 ?
my mine rmx2072. is there anyone have twrp for pro player
Any rom for rmx2072 rather than the Chinese one?
RMX2071
Hello. I got problem with accessing cloud Baido, is there any other source to download file RMX2071_UpdateBack2Android10_V200629.ozip?
but this procedure works? have you tried it?
Ovanes said:
RMX2071
Hello. I got problem with accessing cloud Baido, is there any other source to download file RMX2071_UpdateBack2Android10_V200629.ozip?
Click to expand...
Click to collapse
I'm looking for this file too.
for RMX2071.
Have you found somewhere?
Hello.
I would appreciate the answer if someone knows if is possible RMX2072 that is in bootloop to fix somehow? I have experience with xiaomi phone flashing but not with Realme and I can buy one RMX2072 that is in bootloop so just to know if I would be able to fix it...
Thanks

G8x thinq custom kernel

First of all: This is my first try to compile a kernel so dont expect to much
Device - LG G8x ThinQ LM-g850emw
firmware - 20f eu
used boot.img from 20f
source - original LG Source https://opensource.lge.com/osSch/list?types=NAME&search=LMG850EMW
kernelmods : selinux Permissive at Boot
added cifs/smb in Menuconfig
added f2fs in Menuconfig
added this drivers https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/16a78d8e0fa074b50f059eaeeb91ece276811fcb
added this fs modification https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/742ce5c233ede4ab7f2e2712889b89228c65a92b
disabled crc check https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/f5cd4926cbc424a636e62a5a19e792fa01b94916
this made it working https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/a900c94951b89546b09a3bfde81ffe69dc0df375
So far for me everything works ( wifi,audio,calls,sensors etc )
Install : try it first with fastboot boot bootmagiskpatched.img
if that works flash it with fastboot flash boot_a bootmagiskpatched.img
fastboot flash boot_b bootmagiskpatched.img
Primary goal was getting drivedroid working so if someone knows how pls tell me
Secondary goal was ability to mount smbshare on internal storage ( not working )
modified source is included if someone wants
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great job mate . First custom kernel for g8x on XDA .
666samqel said:
First of all: This is my first try to compile a kernel so dont expect to much
Device - LG G8x ThinQ LM-g850emw
firmware - 20f eu
used boot.img from 20f
source - original LG Source https://opensource.lge.com/osSch/list?types=NAME&search=LMG850EMW
kernelmods : selinux Permissive at Boot
added cifs/smb in Menuconfig
added f2fs in Menuconfig
added this drivers https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/16a78d8e0fa074b50f059eaeeb91ece276811fcb
added this fs modification https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/742ce5c233ede4ab7f2e2712889b89228c65a92b
disabled crc check https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/f5cd4926cbc424a636e62a5a19e792fa01b94916
this made it working https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/a900c94951b89546b09a3bfde81ffe69dc0df375
So far for me everything works ( wifi,audio,calls,sensors etc )
Install : try it first with fastboot boot bootmagiskpatched.img
if that works flash it with fastboot flash boot_a bootmagiskpatched.img
fastboot flash boot_b bootmagiskpatched.img
Primary goal was getting drivedroid working so if someone knows how pls tell me
Secondary goal was ability to mount smbshare on internal storage ( not working )
modified source is included if someone wants
View attachment 5234713View attachment 5234715
Click to expand...
Click to collapse
Really cool. Finally some development for g8x
Man, thank you for your effort!
I installed the kernel while using the Havoc 3.12 GSI ROM. The system booted up beautifully. The only downside is SafetyNet not certifying it. But this is probably because Selinux is set to permissive. I hope your work will be stable soon. Best of luck!
Glad we got a kernel finally! But for some reason though, I can't get it to boot. What compiler did you use? Maybe I could help get DriveDroid working? I'd like that too actually.
Nouty said:
Man, thank you for your effort!
I installed the kernel while using the Havoc 3.12 GSI ROM. The system booted up beautifully. The only downside is SafetyNet not certifying it. But this is probably because Selinux is set to permissive. I hope your work will be stable soon. Best of luck!
Click to expand...
Click to collapse
which gsi rom did u flash? can you send me the link? also, what precautions did u take mate? for safetynet try cts profile spoofing module from magisk and see if it works, did u use twrp to boot havoc on g8x?
vamsi209 said:
which gsi rom did u flash? can you send me the link? also, what precautions did u take mate? for safetynet try cts profile spoofing module from magisk and see if it works, did u use twrp to boot havoc on g8x?
Click to expand...
Click to collapse
Havoc-OS - Browse /arm64-ab at SourceForge.net
sourceforge.net
I installed version 3.12 with GAPPS included.
I have not tested the CTS module but as it is very difficult to pass the safetypass check with the kernel in permissive mode so I went back to the stock kernel.
I installed Havoc using TWRP as system image.
tylercat701 said:
Glad we got a kernel finally! But for some reason though, I can't get it to boot. What compiler did you use? Maybe I could help get DriveDroid working? I'd like that too actually.
Click to expand...
Click to collapse
2. Kernel Build
- Uncompress using following command at the android directory
a) tar -xvzf *_Kernel_Q.tar.gz
- When you compile the kernel source code, you have to add google original "prebuilt" source(toolchain) into the android directory.
- Run following scripts to build kernel
a) cd kernel/msm-4.14
b) export CROSS_COMPILE=../../../prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin/aarch64-linux-android-
c) export CLANG_TRIPLE=aarch64-linux-gnu-
d) make O=./out ARCH=arm64 vendor/mh2lm-perf_defconfig
e) make O=./out ARCH=arm64 REAL_CC=../../../prebuilts/clang/host/linux-x86/clang-r353983c/bin/clang -j24
* "-j24" : The number, 24, is the number of multiple jobs to be invoked simultaneously.
- After build, you can find the build image(Image) at kernel/msm-4.14/out/arch/arm64/boot
its the readme from original source i used
Nouty said:
Havoc-OS - Browse /arm64-ab at SourceForge.net
sourceforge.net
I installed version 3.12 with GAPPS included.
I have not tested the CTS module but as it is very difficult to pass the safetypass check with the kernel in permissive mode so I went back to the stock kernel.
I installed Havoc using TWRP as system image.
Click to expand...
Click to collapse
hy how did you installed it on g8x??
Nouty said:
Havoc-OS - Browse /arm64-ab at SourceForge.net
sourceforge.net
I installed version 3.12 with GAPPS included.
I have not tested the CTS module but as it is very difficult to pass the safetypass check with the kernel in permissive mode so I went back to the stock kernel.
I installed Havoc using TWRP as system image.
Click to expand...
Click to collapse
Please make a small thread and also please mention what all are working and what arentbworking on havoc os, is network and other stuff working? Can i install havoc on g8x indian version?
vamsi209 said:
Please make a small thread and also please mention what all are working and what arentbworking on havoc os, is network and other stuff working? Can i install havoc on g8x indian version?
Click to expand...
Click to collapse
Fingerprint sensor, DT2W and Dual-Screen is not working man.
Otherwise everything works perfectly.
Most likely it can be installed on any version with access to TWRP.
Cheese-ass said:
hy how did you installed it on g8x??
Click to expand...
Click to collapse
Unlock your bootloader and root:
How to Unlock Bootloader and Root Lg G8x + (also a Video Guide)
All fix avilable (no network solved) Watch it carefully do it step by step as showen in my video you will never brick if you follow my video :):love: All required files are in the video description This guide Tested on the firmware (20e...
forum.xda-developers.com
Install "TWRP Magisk flashable" which can be found in the Telegram group LG_G8X_India (follow the instructions).
Download Havoc 3.12 GAPPS in the link above
Boot up in the TWRP
Wipe system, data, dalvik/cache.
Install as system image
reboot e enjoy.
PS:
If your device is not the india version. The root process may change a bit.
You will need to extract boot_a and boot_b for your version. Use Magisk to apply the patches and install using QPST.
KDZ Extractor:
KDZ Extractor LG
Download the Zip : http://www.mediafire.com/file/0a6iikrao70ma5s/KDZTools_20200305.7z/file Extract the file zip Copy the Downloaded KDZ into the KDZ Extractor folder Open "OneKeyExtraction.bat" It will Start to extract the file for you The...
forum.xda-developers.com
Nouty said:
Unlock your bootloader and root:
How to Unlock Bootloader and Root Lg G8x + (also a Video Guide)
All fix avilable (no network solved) Watch it carefully do it step by step as showen in my video you will never brick if you follow my video :):love: All required files are in the video description This guide Tested on the firmware (20e...
forum.xda-developers.com
Install "TWRP Magisk flashable" which can be found in the Telegram group LG_G8X_India (follow the instructions).
Download Havoc 3.12 GAPPS in the link above
Boot up in the TWRP
Wipe system, data, dalvik/cache.
Install as system image
reboot e enjoy.
PS:
If your device is not the india version. The root process may change a bit.
You will need to extract boot_a and boot_b for your version. Use Magisk to apply the patches and install using QPST.
KDZ Extractor:
KDZ Extractor LG
Download the Zip : http://www.mediafire.com/file/0a6iikrao70ma5s/KDZTools_20200305.7z/file Extract the file zip Copy the Downloaded KDZ into the KDZ Extractor folder Open "OneKeyExtraction.bat" It will Start to extract the file for you The...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for taking time to write this out mate
Nouty said:
Unlock your bootloader and root:
How to Unlock Bootloader and Root Lg G8x + (also a Video Guide)
All fix avilable (no network solved) Watch it carefully do it step by step as showen in my video you will never brick if you follow my video :):love: All required files are in the video description This guide Tested on the firmware (20e...
forum.xda-developers.com
Install "TWRP Magisk flashable" which can be found in the Telegram group LG_G8X_India (follow the instructions).
Download Havoc 3.12 GAPPS in the link above
Boot up in the TWRP
Wipe system, data, dalvik/cache.
Install as system image
reboot e enjoy.
PS:
If your device is not the india version. The root process may change a bit.
You will need to extract boot_a and boot_b for your version. Use Magisk to apply the patches and install using QPST.
KDZ Extractor:
KDZ Extractor LG
Download the Zip : http://www.mediafire.com/file/0a6iikrao70ma5s/KDZTools_20200305.7z/file Extract the file zip Copy the Downloaded KDZ into the KDZ Extractor folder Open "OneKeyExtraction.bat" It will Start to extract the file for you The...
forum.xda-developers.com
Click to expand...
Click to collapse
hy i have a europe version tried it 10 times but dont boot XD could you add your boot.img after installing twrp and the havoc rom? could work to get it over adb command or over a twrp backup (boot.win)
adb = http://gadget-tweak.blogspot.com/p/how-to-pullextract-boot-recovery-system.html#?q
Update!!!!!! Succesfully booted resurrection remix on G8X yayyyyyyyyy
need time now for testing
Tôi có g8x att. Tôi muốn root và cài đặt twrp.
Làm sao
Cheese-ass said:
hy i have a europe version tried it 10 times but dont boot XD could you add your boot.img after installing twrp and the havoc rom? could work to get it over adb command or over a twrp backup (boot.win)
adb = http://gadget-tweak.blogspot.com/p/how-to-pullextract-boot-recovery-system.html#?q
Update!!!!!! Succesfully booted resurrection remix on G8X yayyyyyyyyy
need time now for testing
Click to expand...
Click to collapse
How's RR rom working?
Is there any problem apart from FP, D2TW and dual screen?
LG G8X is a popular device in India bcaz of a Sale of device for less than 300$ just like Poco f1 . It would be great if I get a 62 Hz or more overclock mod as PUBG MOBILE 90FPS config works for 60hz+ devices and it improves fire rate of guns dramatically .
Please just make a mod even if it just 62hz I will be greatly thankfull
666samqel said:
First of all: This is my first try to compile a kernel so dont expect to much
Device - LG G8x ThinQ LM-g850emw
firmware - 20f eu
used boot.img from 20f
source - original LG Source https://opensource.lge.com/osSch/list?types=NAME&search=LMG850EMW
kernelmods : selinux Permissive at Boot
added cifs/smb in Menuconfig
added f2fs in Menuconfig
added this drivers https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/16a78d8e0fa074b50f059eaeeb91ece276811fcb
added this fs modification https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/742ce5c233ede4ab7f2e2712889b89228c65a92b
disabled crc check https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/f5cd4926cbc424a636e62a5a19e792fa01b94916
this made it working https://github.com/Harrydmc/android_kernel_lge_mh2lm/commit/a900c94951b89546b09a3bfde81ffe69dc0df375
So far for me everything works ( wifi,audio,calls,sensors etc )
Install : try it first with fastboot boot bootmagiskpatched.img
if that works flash it with fastboot flash boot_a bootmagiskpatched.img
fastboot flash boot_b bootmagiskpatched.img
Primary goal was getting drivedroid working so if someone knows how pls tell me
Secondary goal was ability to mount smbshare on internal storage ( not working )
modified source is included if someone wants
View attachment 5234713View attachment 5234715
Click to expand...
Click to collapse
Nouty said:
Unlock your bootloader and root:
How to Unlock Bootloader and Root Lg G8x + (also a Video Guide)
All fix avilable (no network solved) Watch it carefully do it step by step as showen in my video you will never brick if you follow my video :):love: All required files are in the video description This guide Tested on the firmware (20e...
forum.xda-developers.com
Install "TWRP Magisk flashable" which can be found in the Telegram group LG_G8X_India (follow the instructions).
Download Havoc 3.12 GAPPS in the link above
Boot up in the TWRP
Wipe system, data, dalvik/cache.
Install as system image
reboot e enjoy.
PS:
If your device is not the india version. The root process may change a bit.
You will need to extract boot_a and boot_b for your version. Use Magisk to apply the patches and install using QPST.
KDZ Extractor:
KDZ Extractor LG
Download the Zip : http://www.mediafire.com/file/0a6iikrao70ma5s/KDZTools_20200305.7z/file Extract the file zip Copy the Downloaded KDZ into the KDZ Extractor folder Open "OneKeyExtraction.bat" It will Start to extract the file for you The...
forum.xda-developers.com
Click to expand...
Click to collapse
Nouty said:
Unlock your bootloader and root:
How to Unlock Bootloader and Root Lg G8x + (also a Video Guide)
All fix avilable (no network solved) Watch it carefully do it step by step as showen in my video you will never brick if you follow my video :):love: All required files are in the video description This guide Tested on the firmware (20e...
forum.xda-developers.com
Install "TWRP Magisk flashable" which can be found in the Telegram group LG_G8X_India (follow the instructions).
Download Havoc 3.12 GAPPS in the link above
Boot up in the TWRP
Wipe system, data, dalvik/cache.
Install as system image
reboot e enjoy.
PS:
If your device is not the india version. The root process may change a bit.
You will need to extract boot_a and boot_b for your version. Use Magisk to apply the patches and install using QPST.
KDZ Extractor:
KDZ Extractor LG
Download the Zip : http://www.mediafire.com/file/0a6iikrao70ma5s/KDZTools_20200305.7z/file Extract the file zip Copy the Downloaded KDZ into the KDZ Extractor folder Open "OneKeyExtraction.bat" It will Start to extract the file for you The...
forum.xda-developers.com
Click to expand...
Click to collapse
LG G8X is a popular device in India bcaz of a Sale of device for less than 300$ just like Poco f1 . It would be great if I get a 62 Hz or more overclock mod as PUBG MOBILE 90FPS config works for 60hz+ devices and it improves fire rate of guns dramatically .
Please just make a mod even if it just 62hz I will be greatly thankfull
Hi! Would flashing the kernel unlock the locked Mobile 3G bands on my AT&T G8x?
Can u compile a kernel with 65hz or 70hz display oc

Realme 7 5G EU version - Guide for unlock bootloader

* Tutorial for unlocking the bootloader *
First : Download some archives :
ADB: https://androidmtk.com/download-universal-adb-driver
mtk drive : https://androidfilehost.com/?fid=4349826312261627236
minimal adb: https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Step 1
Follow this tutorial to change the location (obs) you not really need wi-fi, just need to change the network address (works with cable network)
https://telegra.ph/Realme-7-Pro-Cha...-Variant-only-no-support-for-EU-for-now-02-20
Step 2-
After you change regions to India IN, download and run the unlock apk realme (in depth test)
https://mega.nz/file/4lMAjLLB#4zIT6KfFBGDsR4bxRm6ceXcF80Yz-4R4Gj4S9dhNQFs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when the process is finished, you will have to go to '' start the in-depth-test '' and you will see the bootloader screen
step 3 : Go to your computer and open a command window in the folder where minimal adb is located
write these commands:
Fastboot devices
Fastboot flashing unlock
Step 4 : A black screen asking if you really want to unlock the bootloader will appear, with volume up or down, you select (select '' yes '') Vol UP
after that, the cell will freeze on a screen with some writing, don't be alarmed it's normal!
Just hold the power and volume button up and your phone will restart with the bootloader unlocked
I hope I have helped you!
tutorial by Victor Eduardo
~ Realme 7 5g Brazil (Telegram community) https://t.me/Realme75GBR
Sorry for my bad english :3
Do we already have TWRP for the RMX 2111?
AFTER BLU THEN safenet It turns bright red I don't think it makes sense to BLU unless someone improves it. for realme 7G Try submitting the correct fingerprint to magisk props.
Where is ~ Realme 7 5g Brazil (Telegram community)
give me invite link.
ogutolopes said:
Do we already have TWRP for the RMX 2111?
Click to expand...
Click to collapse
not yet
ps3nano said:
AFTER BLU THEN safenet It turns bright red I don't think it makes sense to BLU unless someone improves it. for realme 7G Try submitting the correct fingerprint to magisk props.
Where is ~ Realme 7 5g Brazil (Telegram community)
give me invite link.
Click to expand...
Click to collapse
ps3nano said:
AFTER BLU THEN safenet It turns bright red I don't think it makes sense to BLU unless someone improves it. for realme 7G Try submitting the correct fingerprint to magisk props.
Where is ~ Realme 7 5g Brazil (Telegram community)
give me invite link.
Click to expand...
Click to collapse
https://t.me/Realme75GBR
When I used magisk props, it became like this. But the only option is x2 pro Correct realme7 5G fingerprint I want someone on the site to look Instead of talking Has anyone created TWRP for RMX2111L1? I will go to Telegram.thanks.
Request ~
RMX2111L1 or RMX2111Pu
PLEASE SOMEONE Make a PBRP.
Home - PitchBlack Recovery Project
The Perfect Android Recovery for your device! PBRP provides the most advanced Open Source Android Recovery to troubleshoot your device on the GO! Download NOW
pitchblackrecovery.com
There are all kinds of mobile smartphones these days
Request~
RMX2111L1 or RMX2111Pu
PBRPを作ってください
Home - PitchBlack Recovery Project
The Perfect Android Recovery for your device! PBRP provides the most advanced Open Source Android Recovery to troubleshoot your device on the GO! Download NOW
pitchblackrecovery.com
最近の携帯スマホはなんでもある
ps3nano said:
Request ~
RMX2111L1 or RMX2111Pu
PLEASE SOMEONE Make a PBRP.
Home - PitchBlack Recovery Project
The Perfect Android Recovery for your device! PBRP provides the most advanced Open Source Android Recovery to troubleshoot your device on the GO! Download NOW
pitchblackrecovery.com
There are all kinds of mobile smartphones these days
Request~
RMX2111L1 or RMX2111Pu
PBRPを作ってください
Home - PitchBlack Recovery Project
The Perfect Android Recovery for your device! PBRP provides the most advanced Open Source Android Recovery to troubleshoot your device on the GO! Download NOW
pitchblackrecovery.com
最近の携帯スマホはなんでもある
Click to expand...
Click to collapse
have some devs doing a port , want test it ? what is ur cellphone?
hey mate, thanks for guide, for step 3, my device isn't found on fastboot when in bootloader screen... my bootloader screen only has 2 lines of words : oppo Verify pass fastboot_unlock_verify ok. when i try fastboot devices, my 7 5g isnt found! any ideas?
Poolwizard said:
hey mate, thanks for guide, for step 3, my device isn't found on fastboot when in bootloader screen... my bootloader screen only has 2 lines of words : oppo Verify pass fastboot_unlock_verify ok. when i try fastboot devices, my 7 5g isnt found! any ideas?
Click to expand...
Click to collapse
You should install adb drivers , it's a driver problem
Victor.edu01 said:
You should install adb drivers , it's a driver problem
Click to expand...
Click to collapse
hey thanks for reply, the command "adb devices" works for me, but when i'm in fastboot mode, "fastboot devices" doesn't..
if adb devices is working, doesn't this mean i have the correct adb drivers working? i changed my region to INDIA IN with no issues
Poolwizard said:
hey thanks for reply, the command "adb devices" works for me, but when i'm in fastboot mode, "fastboot devices" doesn't..
if adb devices is working, doesn't this mean i have the correct adb drivers working? i changed my region to INDIA IN with no issues
Click to expand...
Click to collapse
Hey , can u join in my group ? We can help better on telegram https://t.me/Realme75GBR
Victor.edu01 said:
Hey , can u join in my group ? We can help better on telegram https://t.me/Realme75GBR
Click to expand...
Click to collapse
hey bro thanks for the replies, i research more about my fastboot devices problem, you were 100% correct, i was missing the drivers for realme phones! i downloaded these realme drivers: https://droidfilehost.com/download/download-realme-usb-driver-for-windows/
after that, i followed the instructions on this website:
https://www.getdroidtips.com/realme-usb-drivers/ (scroll down below all the phone models for install instructions)
after that, reboot PC and i was able to use fastboot devices and fastboot flashing unlock (this command took 7~ seconds) - phone was reset afterwards.
Thanks again bro, now need to find chinese TWRP to root with magisk
Poolwizard said:
hey bro thanks for the replies, i research more about my fastboot devices problem, you were 100% correct, i was missing the drivers for realme phones! i downloaded these realme drivers: https://droidfilehost.com/download/download-realme-usb-driver-for-windows/
after that, i followed the instructions on this website:
https://www.getdroidtips.com/realme-usb-drivers/ (scroll down below all the phone models for install instructions)
after that, reboot PC and i was able to use fastboot devices and fastboot flashing unlock (this command took 7~ seconds) - phone was reset afterwards.
Thanks again bro, now need to find chinese TWRP to root with magisk
Click to expand...
Click to collapse
If u found a funcional TWRP or custom recovery, give me link, plz and screenshot
sure i'll do some research and reply back with some news
Guys, please help me. I really need a stock recovery, for European firmware on realme 7 5G. Preferably for the 34th version.
Hi
1. How to check ROM version in RMX2111? I have only RXM2111_11_A.32 info. It should be EU or ES (Spain).
2. Why I can't enter fastboot mode? Holding Volume Up + PWR turn on the phone, Realme logo is shown, then it restarts and this sequence is repeated. Releasing buttons on logo screen cause normal boot. I'm pretty sure, FASTBOOT MODE should appear on logo screen the same as I enter recovery mode.
Victor.edu01 said:
* Tutorial for unlocking the bootloader *
First : Download some archives :
ADB: https://androidmtk.com/download-universal-adb-driver
mtk drive : https://androidfilehost.com/?fid=4349826312261627236
minimal adb: https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Step 1
Follow this tutorial to change the location (obs) you not really need wi-fi, just need to change the network address (works with cable network)
https://telegra.ph/Realme-7-Pro-Cha...-Variant-only-no-support-for-EU-for-now-02-20
Step 2-
After you change regions to India IN, download and run the unlock apk realme (in depth test)
https://mega.nz/file/4lMAjLLB#4zIT6KfFBGDsR4bxRm6ceXcF80Yz-4R4Gj4S9dhNQFs
View attachment 5300179
when the process is finished, you will have to go to '' start the in-depth-test '' and you will see the bootloader screen
step 3 : Go to your computer and open a command window in the folder where minimal adb is located
write these commands:
Fastboot devices
Fastboot flashing unlock
Step 4 : A black screen asking if you really want to unlock the bootloader will appear, with volume up or down, you select (select '' yes '') Vol UP
View attachment 5300185
after that, the cell will freeze on a screen with some writing, don't be alarmed it's normal!
View attachment 5300189
Just hold the power and volume button up and your phone will restart with the bootloader unlocked
View attachment 5300193
View attachment 5300219
View attachment 5302703
I hope I have helped you!
tutorial by Victor Eduardo
~ Realme 7 5g Brazil (Telegram community) https://t.me/Realme75GBR
Sorry for my bad english :3
Click to expand...
Click to collapse
ps3nano said:
Request ~
RMX2111L1 or RMX2111Pu
PLEASE SOMEONE Make a PBRP.
Home - PitchBlack Recovery Project
The Perfect Android Recovery for your device! PBRP provides the most advanced Open Source Android Recovery to troubleshoot your device on the GO! Download NOW
pitchblackrecovery.com
There are all kinds of mobile smartphones these days
Request~
RMX2111L1 or RMX2111Pu
PBRPを作ってください
Home - PitchBlack Recovery Project
The Perfect Android Recovery for your device! PBRP provides the most advanced Open Source Android Recovery to troubleshoot your device on the GO! Download NOW
pitchblackrecovery.com
最近の携帯スマホはなんでもある
Click to expand...
Click to collapse
Victor.edu01 said:
* Tutorial for unlocking the bootloader *
First : Download some archives :
ADB: https://androidmtk.com/download-universal-adb-driver
mtk drive : https://androidfilehost.com/?fid=4349826312261627236
minimal adb: https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Step 1
Follow this tutorial to change the location (obs) you not really need wi-fi, just need to change the network address (works with cable network)
https://telegra.ph/Realme-7-Pro-Cha...-Variant-only-no-support-for-EU-for-now-02-20
Step 2-
After you change regions to India IN, download and run the unlock apk realme (in depth test)
https://mega.nz/file/4lMAjLLB#4zIT6KfFBGDsR4bxRm6ceXcF80Yz-4R4Gj4S9dhNQFs
View attachment 5300179
when the process is finished, you will have to go to '' start the in-depth-test '' and you will see the bootloader screen
step 3 : Go to your computer and open a command window in the folder where minimal adb is located
write these commands:
Fastboot devices
Fastboot flashing unlock
Step 4 : A black screen asking if you really want to unlock the bootloader will appear, with volume up or down, you select (select '' yes '') Vol UP
View attachment 5300185
after that, the cell will freeze on a screen with some writing, don't be alarmed it's normal!
View attachment 5300189
Just hold the power and volume button up and your phone will restart with the bootloader unlocked
View attachment 5300193
View attachment 5300219
View attachment 5302703
I hope I have helped you!
tutorial by Victor Eduardo
~ Realme 7 5g Brazil (Telegram community) https://t.me/Realme75GBR
Sorry for my bad english :3
Click to expand...
Click to collapse
TWRP for realme 7 5g :
[SHARE] Realme 7 5G TWRP and TREE
hello I'm sharing a functional twrp for the Realme 7 5G ( rmx2111) By: mastersenpai05 JUST FLASH IT ON ANDROIND 10 (REALME UI 1.0) LINK: https://mega.nz/file/MhUxFabT#5Spp1OiuF3lIOdf6jU8InLUwgqCOUYlZbBujxN82sxo Twrp tree...
forum.xda-developers.com
[SHARE] Realme 7 5G TWRP and TREE
hello I'm sharing a functional twrp for the Realme 7 5G ( rmx2111) By: mastersenpai05 JUST FLASH IT ON ANDROIND 10 (REALME UI 1.0) LINK: https://mega.nz/file/MhUxFabT#5Spp1OiuF3lIOdf6jU8InLUwgqCOUYlZbBujxN82sxo Twrp tree...
forum.xda-developers.com
ps3nano said:
Request ~
RMX2111L1 or RMX2111Pu
PLEASE SOMEONE Make a PBRP.
Home - PitchBlack Recovery Project
The Perfect Android Recovery for your device! PBRP provides the most advanced Open Source Android Recovery to troubleshoot your device on the GO! Download NOW
pitchblackrecovery.com
There are all kinds of mobile smartphones these days
Request~
RMX2111L1 or RMX2111Pu
PBRPを作ってください
Home - PitchBlack Recovery Project
The Perfect Android Recovery for your device! PBRP provides the most advanced Open Source Android Recovery to troubleshoot your device on the GO! Download NOW
pitchblackrecovery.com
最近の携帯スマホはなんでもある
Click to expand...
Click to collapse

How To Guide [ROM][STOCK][FASTBOOT][OP9R] Stock OxygenOS Fastboot ROMs

Ever wanted to unbrick your device or switch to stock ROM from a custom ROM without using MSM Unbrick tool and keeping your bootloader unlocked after that well fastboot ROMs are here to help you . I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
1). Download the zip
2). Unpack the zip in a folder
3). Reboot the OnePlus 9R in fastboot-bootloader mode (Power and volume + and volume-)
4). Connect the OnePlus 9R to PC
5). Run flash-all.bat flasher
6). Wait until the process end
7). Voila! your OnePlus 9R will now boot into OxygenOS
POINTS TO REMEMBER
* "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
* These ROMs can't be used to update or downgrade your phone but just to restore your phone. Downgrade from OOS 12 works now.
* This can’t be used to switch from ColorOS to OxygenOS you can use MSM unbrick tool to do that.
DOWNLOAD:-
https://sourceforge.net/projects/op8t-9r-fastboot-roms/files/OnePlus_9R/
Nice
Hi OP, I changed the tag from Development to How To Guide, because we only use Development for original work like you build the ROM from kernel/device tree etc... Thanks.
HELLBOY017 said:
Ever wanted to unbrick your device or switch to stock ROM from a custom ROM without using MSM Unbrick tool and keeping your bootloader unlocked after that well fastboot ROMs are here to help you . I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
1). Download the zip
2). Unpack the zip in a folder
3). Reboot the OnePlus 9R in fastboot-bootloader mode (Power and volume + and volume-)
4). Connect the OnePlus 9R to PC
5). Run flash-all.bat flasher
6). Wait until the process end
7). Voila! your OnePlus 9R will now boot into OxygenOS
POINTS TO REMEMBER
* "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
* These ROMs can't be used to update or downgrade your phone but just to restore your phone.
* This can’t be used to switch from ColorOS to OxygenOS you can use MSM unbrick tool to do that.
* !!! IMPORTANT !!!
Before flashing make sure you know about which type of ram your device supports i.e LPDDR4X/LPDDR5 as flashing wrong xbl config will hardbrick your device.
Here’s how you can check what type of ram your device has:-
Now, as to exactly find out which variant that you have, turn on USB debugging and enter this command:-
Code:
adb shell getprop ro.boot.ddr_type
If the value is 0, that means you have LPDDR4X. If the value is 1, that means you have LPDDR5.
This command is more reliable than the Devcheck and other apps.
DOWNLOAD:- https://drive.google.com/file/d/1LTknGhfR2JTtXhN0rGMCS4OwmUdqt3PF/view?usp=sharing
Click to expand...
Click to collapse
Errr sorry I can make sure that I have the DDR5,but it seems that when I complete the flash using the DDR5 profile config,my phone hard bricked, so how can I get it back? Now it can not even enter 9008 mode
zwk22160 said:
Errr sorry I can make sure that I have the DDR5,but it seems that when I complete the flash using the DDR5 profile config,my phone hard bricked, so how can I get it back? Now it can not even enter 9008 mode
Click to expand...
Click to collapse
You will most likely need to visit the service center and get your phone repaired.
Are you sure that your device had DDR5?
theincognito said:
You will most likely need to visit the service center and get your phone repaired.
Are you sure that your device had DDR5?
Click to expand...
Click to collapse
Actually,I checked my DDR type via devcheck instead of the adb command. Seems that the dev check is no so reliable. Anyway, I have already sent my phone to the service center to repair, I have a OnePlus 7 pro as the backup phone, so it doesn't affect me too much.
Created a Tutorial based on your firmware/instructions. Hoping you will like it.
https://androidmtk.com/install-firmware-oneplus-9r
zwk22160 said:
Actually,I checked my DDR type via devcheck instead of the adb command. Seems that the dev check is no so reliable. Anyway, I have already sent my phone to the service center to repair, I have a OnePlus 7 pro as the backup phone, so it doesn't affect me too much.
Click to expand...
Click to collapse
Yeah. The apps aren't reliable at this. Always use the adb command. 100% reliable. And since it's harbricked for you, I am pretty sure that you have a DDR4X variant.
zwk22160 said:
Errr sorry I can make sure that I have the DDR5,but it seems that when I complete the flash using the DDR5 profile config,my phone hard bricked, so how can I get it back? Now it can not even enter 9008 mode
Click to expand...
Click to collapse
It’s clearly written to not trust devcheck and other apps that prop is the only trusted source of finding which type of ram ur device has. It has also come to my attention that DDR5 devices can boot to EDL if we flash wrong xbl configs on them but the DDR4 ones can’t boot to EDL if wrong xbl config is flashed. (Means ddr4 users would have to get phone repaired by service center if wrong xbl config is flashed on their device)
PetiaWarzel said:
Created a Tutorial based on your firmware/instructions. Hoping you will like it.
https://androidmtk.com/install-firmware-oneplus-9r
Click to expand...
Click to collapse
Appreciate it a lot! Thanks
I faced the same problem
Service center says they can't flash it back
They ended up replaced a new motherboard for me
hmm for me the
Code:
adb shell getprop ro.boot.ddr_type
returns empty.
I guess that infers I'm using LPDDR4X?
Edit:
Code:
adb shell getprop
This would return a complete list of all the properties you can query with this command. For me, this list doesn't seem to have any field called "ro.boot.ddr_type"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using the Chinese variant of OP9R, not so sure if it matters.
Also, DevCheck would not report RAM variants under the hardware tab as well.
Leohearts said:
I faced the same problem
Service center says they can't flash it back
They ended up replaced a new motherboard for me
Click to expand...
Click to collapse
I checked it again and
OnePlus9R:/ $ getprop | grep ddr
[ro.boot.ddr_type]: [1]
[vendor.boot.ddr_type]: [1]
OnePlus9R:/ $
I'm sure flashed the ddr5 version, but it hard-bricked and even cant boot into 9008
*UPDATED*
* Added OxygenOS 11.2.6.6 Fastboot ROM
* Removed xbl configs so that now no more hardbricks happen
* Reduced partition sizes for inactive slot so that ROMs can be flashed properly through fastboot
will this work on Chinese variant 12gb/256gb ddr4 ? LE2100 bl is already unlocked
Mkkt Bkkt said:
will this work on Chinese variant 12gb/256gb ddr4 ? LE2100 bl is already unlocked
Click to expand...
Click to collapse
If ur using oxygenos then yes
HELLBOY017 said:
If ur using oxygenos then yes
Click to expand...
Click to collapse
yes , for some reason it came with oxygenos preinstalled
HELLBOY017 said:
Ever wanted to unbrick your device or switch to stock ROM from a custom ROM without using MSM Unbrick tool and keeping your bootloader unlocked after that well fastboot ROMs are here to help you . I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
1). Download the zip
2). Unpack the zip in a folder
3). Reboot the OnePlus 9R in fastboot-bootloader mode (Power and volume + and volume-)
4). Connect the OnePlus 9R to PC
5). Run flash-all.bat flasher
6). Wait until the process end
7). Voila! your OnePlus 9R will now boot into OxygenOS
POINTS TO REMEMBER
* "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
* These ROMs can't be used to update or downgrade your phone but just to restore your phone.
* This can’t be used to switch from ColorOS to OxygenOS you can use MSM unbrick tool to do that.
DOWNLOAD:-
https://mega.nz/folder/ePIETB4D#sU8cJ54l4UI7JCXGwc7Nog
Click to expand...
Click to collapse
Download link in Mega can't download with standard account, requires premium. could you please upload in other hosting website if possible? Thanks!
logeshwywan said:
Download link in Mega can't download with standard account, requires premium. could you please upload in other hosting website if possible? Thanks!
Click to expand...
Click to collapse
Will do
Link updated.
*Apologies for updating it late as I had fever so didn't have time for mirror it somewhere else

Question Is there any custom ROM available for Redmi Note 11S(fleur) rather than miui rom ?

I have been searching since 6 months but am not able to download even a single custom ROM for my Redmi note 11S, I searched all through Google. Please help me.
llSiddharthll said:
I have been searching since 6 months but am not able to download even a single custom ROM for my Redmi note 11S, I searched all through Google. Please help me.
Click to expand...
Click to collapse
No or few development for Xiaomi with Mediatek processors.
llSiddharthll said:
I have been searching since 6 months but am not able to download even a single custom ROM for my Redmi note 11S, I searched all through Google. Please help me.
Click to expand...
Click to collapse
Yeah. Lineage 18.1.
https://sourceforge.net/projects/fleur-builds/files/lineage-18.1-20221023-UNOFFICIAL-fleur.zip/download
https://sourceforge.net/projects/fleur-builds/files/twrp_fleur_24-09-2022.img/download
Requirements:
- BACKUP YOUR DATA
- you must be on stock rom first and you must have a pc. Connect your phone to pc and put it into fastboot mode (vol - and power)
Installation:
Rom Install process with payload.bin
1) Download testing_files.zip from gdrive LINK
2) Unzip rom file with 7Zip or Winrar or Winzip (if you dont know how to unzip files you can quit now you're unfit for rom testing.)
3) create a folder name ROM and move that all files you got from setp-2.
4) next unzip custtom-rom zip you downlaoded from gdrive and unzip it
4) Move payload.bin file to ROM folder.
5) run rom.bat file if you're using windows PC. If you're using Linux use rom.sh
6) your phone will boot now. wait 5 min.
Credits to Aghora7 on telegram
Bugs :
- 90HZ mode
- NFC need to check
- VoLTE
- Brightness working but not properly
I hope you can understand the guide. I just copied and pasted it from the guy who made the ROM.
Nem1x said:
Yeah. Lineage 18.1.
https://sourceforge.net/projects/fleur-builds/files/lineage-18.1-20221023-UNOFFICIAL-fleur.zip/download
https://sourceforge.net/projects/fleur-builds/files/twrp_fleur_24-09-2022.img/download
Requirements:
- BACKUP YOUR DATA
- you must be on stock rom first and you must have a pc. Connect your phone to pc and put it into fastboot mode (vol - and power)
Installation:
Rom Install process with payload.bin
1) Download testing_files.zip from gdrive LINK
2) Unzip rom file with 7Zip or Winrar or Winzip (if you dont know how to unzip files you can quit now you're unfit for rom testing.)
3) create a folder name ROM and move that all files you got from setp-2.
4) next unzip custtom-rom zip you downlaoded from gdrive and unzip it
4) Move payload.bin file to ROM folder.
5) run rom.bat file if you're using windows PC. If you're using Linux use rom.sh
6) your phone will boot now. wait 5 min.
Credits to Aghora7 on telegram
Bugs :
- 90HZ mode
- NFC need to check
- VoLTE
- Brightness working but not properly
Click to expand...
Click to collapse
Thank you for help..
There have been a few other posts about ROMs already on this device forum:
Custom Rom
Can anybody compile lineage os 18.1 for this device? I know there is the GSI ROM for this device and I have been using it, but it has bugs. Would be great to get a device specific rom. Thanks!
forum.xda-developers.com
Privacy-Oriented Custom ROM Recommendations
Hi everyone, let me preface this with saying that I have searched for similar threads to avoid redundant threads, and I didn't find anything similar to this. I apologize in case I somehow missed it and am accidentally making a duplicate thread...
forum.xda-developers.com
Is this device will get custom roms or not ?
I bought redmi/poco device just for custom roms and sadly looks like this device will never get custom rom support 😭 , no devloper bought this device because of mediatelk chipset and poco is also not releasing kernel sources 😭.
forum.xda-developers.com
Nem1x said:
Yeah. Lineage 18.1.
https://sourceforge.net/projects/fleur-builds/files/lineage-18.1-20221023-UNOFFICIAL-fleur.zip/download
https://sourceforge.net/projects/fleur-builds/files/twrp_fleur_24-09-2022.img/download
Requirements:
- BACKUP YOUR DATA
- you must be on stock rom first and you must have a pc. Connect your phone to pc and put it into fastboot mode (vol - and power)
Installation:
Rom Install process with payload.bin
1) Download testing_files.zip from gdrive LINK
2) Unzip rom file with 7Zip or Winrar or Winzip (if you dont know how to unzip files you can quit now you're unfit for rom testing.)
3) create a folder name ROM and move that all files you got from setp-2.
4) next unzip custtom-rom zip you downlaoded from gdrive and unzip it
4) Move payload.bin file to ROM folder.
5) run rom.bat file if you're using windows PC. If you're using Linux use rom.sh
6) your phone will boot now. wait 5 min.
Credits to Aghora7 on telegram
Bugs :
- 90HZ mode
- NFC need to check
- VoLTE
- Brightness working but not properly
Click to expand...
Click to collapse
Bro Its not working , my phone goes in reboot and doesn't start , so I have to flash it again to start it. Please provide some proper instruction or try something new.
llSiddharthll said:
Bro Its not working , my phone goes in reboot and doesn't start , so I have to flash it again to start it. Please provide some proper instruction or try something new.
Click to expand...
Click to collapse
I don't really know how to flash it. I just sent you what I found. Make telegram account and join Redmi note 11s or Poco M4 pro group. You will get help there.
Nem1x said:
Yeah. Lineage 18.1.
https://sourceforge.net/projects/fleur-builds/files/lineage-18.1-20221023-UNOFFICIAL-fleur.zip/download
https://sourceforge.net/projects/fleur-builds/files/twrp_fleur_24-09-2022.img/download
Requirements:
- BACKUP YOUR DATA
- you must be on stock rom first and you must have a pc. Connect your phone to pc and put it into fastboot mode (vol - and power)
Installation:
Rom Install process with payload.bin
1) Download testing_files.zip from gdrive LINK
2) Unzip rom file with 7Zip or Winrar or Winzip (if you dont know how to unzip files you can quit now you're unfit for rom testing.)
3) create a folder name ROM and move that all files you got from setp-2.
4) next unzip custtom-rom zip you downlaoded from gdrive and unzip it
4) Move payload.bin file to ROM folder.
5) run rom.bat file if you're using windows PC. If you're using Linux use rom.sh
6) your phone will boot now. wait 5 min.
Credits to Aghora7 on telegram
Bugs :
- 90HZ mode
- NFC need to check
- VoLTE
- Brightness working but not properly
Click to expand...
Click to collapse
Can we trust this build uploaded only on sourceforge ?
The official lineageos website do not report Redmi Note 11S as a supported device.
llSiddharthll said:
Bro Its not working , my phone goes in reboot and doesn't start , so I have to flash it again to start it. Please provide some proper instruction or try something new.
Click to expand...
Click to collapse
Another reason to have doubts..
Anyone successfully found and flashed any custom rom?
I do not like the MIUI stock one too
shady9090 said:
Can we trust this build uploaded only on sourceforge ?
The official lineageos website do not report Redmi Note 11S as a supported device.
Another reason to have doubts..
Anyone successfully found and flashed any custom rom?
I do not like the MIUI stock one too
Click to expand...
Click to collapse
Just because it's unofficial, doesn't mean it's*unsafe*. Also make telegram account and join Poco M4 pro/ note 11s groups. You can get help there.
Nem1x said:
... join Poco M4 pro/ note 11s groups. You can get help there.
Click to expand...
Click to collapse
This sounds interesting.. can you link some good group here?
shady9090 said:
This sounds interesting.. can you link some good group here?
Click to expand...
Click to collapse
Poco M4 Pro 4G/Redmi Note 11s | Official
POCO M4 PRO / Redmi Note 11s - Official Telegram Group • Read Rules (/rules), English only • Our Channel: @PocoM4ProGlobalUpdates • Our Off-Topic group: @PocoOffTopic • Our Customization group: @PocophoneCustomization
t.me
Redmi Note 11S Community
Redmi Note 11 community chat Channel: @RedmiNote11S_Updates Off-topic group: @XiaomemeOT Photography group: @XiaomemePhotography
t.me
Poco M4 Pro / Redmi Note 11s | Updates
You can view and join @PocoM4ProGlobalUpdates right away.
t.me
Thank you @Nem1x !
I found the mentioned Lineage OS rom for this device in the telegram groups:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So.... some developments seems to be active.
Anyone else tried this rom and can report some issues / if it is working properly ?
shady9090 said:
So.... some developments seems to be active.
Click to expand...
Click to collapse
Yeah. That guy aghora7 is making trees for fluer. You can asking him most thing IN GROUP.
shady9090 said:
Anyone else tried this rom and can report some issues / if it is working properly ?
Click to expand...
Click to collapse
Again ask on telegram groups. You will have better chance at getting answers you want.
llSiddharthll said:
I have been searching since 6 months but am not able to download even a single custom ROM for my Redmi note 11S, I searched all through Google. Please help me.
Click to expand...
Click to collapse
There is no offical custom roms for poco m4 pro 4g, but you can to flash any gsi rom:
1. enter in fastboot mode
2. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (take the vbmeta.img file from your current firmware)
3. fastboot reboot fastboot
4. fastboot getvar is-userspace
5. fastboot erase system
6. fastboot delete-logical-partition product_a
7. fastboot flash system YOUR_GSI_ROM.img
8. fastboot reboot recovery
9. (in recovery) wipe data
10. (in recovery) reboot to system
MiFoTheGood said:
There is no offical custom roms for poco m4 pro 4g, but you can to flash any gsi rom:
1. enter in fastboot mode
2. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (take the vbmeta.img file from your current firmware)
3. fastboot reboot fastboot
4. fastboot getvar is-userspace
5. fastboot erase system
6. fastboot delete-logical-partition product_a
7. fastboot flash system YOUR_GSI_ROM.img
8. fastboot reboot recovery
9. (in recovery) wipe data
10. (in recovery) reboot to system
Click to expand...
Click to collapse
if animations are laggy just turn off hardware overlays and set 90 Hz in treble settings
Just got my Note 11s 4G (fleur) and its running very good with Android 11.
Cause there are no stable GSI´s for this device, i wanted to ask if anyone installed Android 13 with DSU Loader option in the developer options.
ncc1977d said:
Just got my Note 11s 4G (fleur) and its running very good with Android 11.
Cause there are no stable GSI´s for this device, i wanted to ask if anyone installed Android 13 with DSU Loader option in the developer options.
Click to expand...
Click to collapse
There we got almost 6 custom roms which are unofficial and have little bugs they all work on android 11 and arrow OS works on a12, there is no android 13 yet, development in progress, If I get any I will let u know.
llSiddharthll said:
There we got almost 6 custom roms which are unofficial and have little bugs they all work on android 11 and arrow OS works on a12, there is no android 13 yet, development in progress, If I get any I will let u know.
Click to expand...
Click to collapse
But what does the DSU Loader ? I have clicked it and its downloading a dynamic System Update image File, See the Screenshots...
ncc1977d said:
Just got my Note 11s 4G (fleur) and its running very good with Android 11.
Cause there are no stable GSI´s for this device, i wanted to ask if anyone installed Android 13 with DSU Loader option in the developer options.
Click to expand...
Click to collapse
I started developing ROMs for this phone. You can check out our telegram group.
Poco M4 Pro / Redmi Note 11s | Updates
You can view and join @PocoM4ProGlobalUpdates right away.
t.me

Categories

Resources