I have a redmi note 9s (the topic is about this device). After testing a port of Android 13 or beta 2 I ran out of sensors and the audio was cut off, they told me to pass the stock via mi flash to solve the same, the stock doesn't boot on my phone anymore, it just stays on the Redmi logo, but I enter in fastboot, in recovery stock and after passing the custom recovery I enter the custom recovery too. With that I can pass some custom to use the cell phone, it comes back with the sensor bug and audio cut or no audio, I wipe several times, format data, I pass a zip called "clean.zip" the firmware and even then solve the sensors and audio. I'm afraid to keep changing roms now, but it's complicated to stay in just one rom, and when Android 13 comes out I'm stuck on 12, apart from that I can't go to stock anymore. Anyone had a similar problem? do you know any solution? Thank you very much for everyone's help in advance, Best Regards MurilloAssF
Related
Hye. Need someone expert on this. My device got problem on sounds. This happens when i plug in 3.5mm audio jack to my speaker. Suddenly my device reboot loop on mi logo. Flash RR custom rom and its booting but cannot call or play any sound from audio file or video. Already flash with miflash also no luck. Just reboot loop on mi logo. Battery consumption also going crazy. Less than 5 hours without doing anything. And fevice feel warm always.
Try going back to official miui
Already flash stock global rom using miFlash with no luck. Btw, thanks.
Did you make full backup of all partitions using alka twrp?
My Redmi 3 IDO is stuck at the startup, system process failed ;(
Sometimes it starts up after +-2 hours... today it started, I immediately went to factory reset, but nothing happened when I pushed the button...
Then I tried to install TRWP & Kingroot to root my device, but this process hangs too, I immediately get into the lock screen and touch screen doesn't work.
I had put some roms, TRWP on my SD Card to flash asap, but I cannot get to flash...
Then I installed MiPCSuite (adb drivers installed on pc), but no device found.
I also installed XiaMiFlash on my pc and tried to flash a TRWP or Rom from there, but immediately fail.
I guess that original bootloader from Xiaomi is protected or something.
How can I get over this, so that I can install a new bootloader from where I can flash customised roms ?
Don't know what to do now, flash from pc,...
Touchscreen doesn't work, it starts up in lock screen and the light goes out faster than usual.
Today it booted up once, I had turned of the lock screen, but now it is on again...
I can only put my phone in download or recover mode with that built in Chinese bootloader, but don't know if I can do something from there.
I also tried to boot without SD/Sim card so that i'm sure that nothing blocks it, but this didn't help.
I guess I used too much apps & cleaners....
Maybe i'm lucky and it will boot after 2-3 hrs, but still when i'm in my device, nothing seems to work, this really sucks
Letting the battery run out and wait a few days to turn it on won't help probably...
Theres a lot of factors to determine in this case, first of all, is it a Snapdragon model (kate/kenzo) or a Mediatek(henessy)?, what version of MIUI are you using?, and most importantly, what did you do to get the phone in that state?
But in your case the most reasonable solution is put the phone on EDL mode and flash it using MIFlash, that software is used only for flashing an original MIUI Rom, you cant install TWRP or any other rom.
Yes it's a snapdragon (also tested it with an app), it's the IDO version (Redmi Note 3 international version).
The Miui is still the original version 7.
Actually I didn't nothing special that the phone got in that state, I think I just installed too many apps which resulted in a conflict that the proces system doesn't react and hangs at startup.
It's also strange that fastboot mode does nothing, it just shows the animated figures...
I will bootup in EDL download mode and try to flash the stock rom, the only thing is that I don't know which one.
My version is the IDO version, it's not in this list, I'll try the Kenzo.
http://en.miui.com/a-234.html
Cannot receive hello packet error and it stops flashing... strange
Innovator said:
Yes it's a snapdragon (also tested it with an app), it's the IDO version (Redmi Note 3 international version).
The Miui is still the original version 7.
Actually I didn't nothing special that the phone got in that state, I think I just installed too many apps which resulted in a conflict that the proces system doesn't react and hangs at startup.
It's also strange that fastboot mode does nothing, it just shows the animated figures...
I will bootup in EDL download mode and try to flash the stock rom, the only thing is that I don't know which one.
My version is the IDO version, it's not in this list, I'll try the Kenzo.
http://en.miui.com/a-234.html
Cannot receive hello packet error and it stops flashing... strange
Click to expand...
Click to collapse
your phone is redmi 3 not redmi note 3...do not flash with redmi note 3 firmware
Innovator said:
Yes it's a snapdragon (also tested it with an app), it's the IDO version (Redmi Note 3 international version).
The Miui is still the original version 7.
Actually I didn't nothing special that the phone got in that state, I think I just installed too many apps which resulted in a conflict that the proces system doesn't react and hangs at startup.
It's also strange that fastboot mode does nothing, it just shows the animated figures...
I will bootup in EDL download mode and try to flash the stock rom, the only thing is that I don't know which one.
My version is the IDO version, it's not in this list, I'll try the Kenzo.
http://en.miui.com/a-234.html
Cannot receive hello packet error and it stops flashing... strange
Click to expand...
Click to collapse
Kenzo is codename for Redmi Note 3 and Kate is for Redmi Note 3 Special Edition (International version). Ido codename is for Redmi 3 (http://en.miui.com/download-298.html). Here is URL to Redmi 3's forum: https://forum.xda-developers.com/redmi-3
Thanks, it wasn't necessary anymore, while driving from work and waiting a few hours it suddenly started up and I quickly reseted to factory settings
ExEdd said:
Kenzo is codename for Redmi Note 3 and Kate is for Redmi Note 3 Special Edition (International version). Ido codename is for Redmi 3 (http://en.miui.com/download-298.html). Here is URL to Redmi 3's forum: https://forum.xda-developers.com/redmi-3
Click to expand...
Click to collapse
Recently I decided to install Cardinal Aosp on my Redmi Note 4 (SD) with TWRP. But when the system starts after the boot, a message appears that the Bluetooth stopped working and after a few seconds the smartphone restarts and stays in that cycle.
Can someone help me? I have already tried to install the AICP, Pixel Experience, Cardinal, download the files twice, change the version of TWRP. But nothing to fix the problem.
Sorry about my English.
Try another custom room
alwan_afif said:
Try another custom room
Click to expand...
Click to collapse
I decided to go back to the miui with fastboot, through the official website. But the same problem continues, the system starts and in the initial steps to set up google account and personal data, it restarts. It reconnects, starts the system and restarts, and it remains so infinitely. Can it be a hardware problem?
Have you try custom room based on Lineage OS? If after install Bluetooth still not working it's possible hardware problem
alwan_afif said:
Have you try custom room based on Lineage OS? If after install Bluetooth still not working it's possible hardware problem
Click to expand...
Click to collapse
No, but I have already tried to flash MIUI via fastboot in EDL mode and it remains the same. The device insists on restarting for whatever I do.
Until yesterday I had the MIUI ROM for my Redmi Note 4, however I wanted to send another two ROMS (Lineage and Resurrection Remix) to see if they would convince me.
(I clarify that I already knew the process to install Roms).
So I rebooted in Recovery mode, hize / wipe and then install Lineague, but automatically I realized that I was making an error, saying that the rom was for Mido and that my cell phone instead of mido was, literally, a point.
So I turned on the pc, use the xiaomiMiFlash tool to install a miui rom (of course, with the option of clean_all) and unpleasantly I was surprised that it restarted every 20 or 30 sec., Please I need help, because I've tried other roms and it's still the same, turn it on, exit the start menu and after a few seconds it restarts. Tell me what I can do.
What does this mean - "my cell phone instead of mido was, literally, a point"? What cellphone do you have?
rossarnie said:
What does this mean - "my cell phone instead of mido was, literally, a point"? What cellphone do you have?
Click to expand...
Click to collapse
I have a Redmi Note 4(Mido, the version with a Qualcomm CPU) and this restarts every 30 sec, I've even used MiFlash to flash the rom with the option to clean everything and even so it remains the same.
I already try with this guide: https://forum.xda-developers.com/redmi-note-4/how-to/how-to-fix-totally-dead-redmi-note-4-t3746465 and nothing, I get an error of "Sahara" with qfil
Treinor said:
Until yesterday I had the MIUI ROM for my Redmi Note 4, however I wanted to send another two ROMS (Lineage and Resurrection Remix) to see if they would convince me.
(I clarify that I already knew the process to install Roms).
So I rebooted in Recovery mode, hize / wipe and then install Lineague, but automatically I realized that I was making an error, saying that the rom was for Mido and that my cell phone instead of mido was, literally, a point.
So I turned on the pc, use the xiaomiMiFlash tool to install a miui rom (of course, with the option of clean_all) and unpleasantly I was surprised that it restarted every 20 or 30 sec., Please I need help, because I've tried other roms and it's still the same, turn it on, exit the start menu and after a few seconds it restarts. Tell me what I can do.
Click to expand...
Click to collapse
I guess you flashed a treble ROM using a non treble recovery. Use this recovery and try to flash lineage OS again.
https://drive.google.com/a/my.smccd.edu/uc?id=1I_EaHHPWERIaMyBasfGJldugLjadU13P&export=download
Hi
Today after installing the update to xiaomi.eu rom, Android 10, my touch screen just died. I tried flashing 3 various roms by MiFlash with no success. I am able to use fastboot, adb and install TRWP but no matter what I do the touchscreen is dead making the phone useless.
When I boot it up I get asked to unlock it by providing the password to my mi account, which previously worked, but currently I'm unable to use my phone.
Anybody had a similar issue? any way to fix it?
Did you choose clear all option when flashing from fastboot
Yes, with no result unfortunately.
Can you use the touchscreen while in TWRP/recovery mode? If you have a OTG cable you can connect a normal USB mouse to your phone and use that to navigate. Maybe it is just locking up at the password boot stage?
Try to flash it back to stock with stock recovery with a different build date preferably 9 and see if you can wipe it that way......
will try both ideas later today
SOLVED
I finally managed to get it back to life. It turned out that I must have damaged the touch drivers and flashing the phone by fastboot didn't help at all as the drivers are located on prevent partition (as I was told by someone)
So the thing I did was to flash a custom kernel with touch drivers. I used franco kernel kernels.franco-lnx.net. First I installed (using physical mouse) xiaomi eu android 9 rom, than I flashed the franco kernel for android 9. At that point the touch screen came back to life. Afterwards I was able to update to xiaomi eu android 10 rom with no problem.
Hope it can be helpful for anybody with similar problem.