Question unable to unlock the bootloader (A52 5G, SM-A526B) - Samsung Galaxy A52 5G

So I'm trying to unlock my bootloader to root my phone with Magisk (which also patches VBmeta, which is important for me to do). Originally the OEM unlock option was not appearing in my phone's settings, but I fixed that with the date hack (set the phone's clock to 2022-05-01 instead of 2022-08-05). But now when I reboot into the first stage of download mode, the option to unlock the bootloader does not show up, it just has the option to reboot, enter download mode, or show the barcode. When I enter download mode, the KB status shows as ACTIVE. The CSC I'm using is BTU and I'm on the latest CVG2 firmware of Android 12 (OneUI 4.1).
Any ideas?

Anything?

Make sure that USB debugging in developer options is enabled.
Turn off your device.
Hold volume up and down buttons and keep holding them.
While holding them, connect your smartphone to a PC using USB cable.
There will be a warning message.
"... to continue press volume up ..."
Don't just press volume up button, but keep holding it.

Zdrawko0o said:
Make sure that USB debugging in developer options is enabled.
Turn off your device.
Hold volume up and down buttons and keep holding them.
While holding them, connect your smartphone to a PC using USB cable.
There will be a warning message.
"... to continue press volume up ..."
Don't just press volume up button, but keep holding it.
Click to expand...
Click to collapse
Yeah I do that and the unlock bootloader option doesn't show up. Pressing and holding volume up goes into download mode, as described in the original post...

Can't help you, sorry.

Zdrawko0o said:
Can't help you, sorry.
Click to expand...
Click to collapse
No worries lol

Is the A526B (Snapdragon) as sold in the UK using BTU as the CSC considered a US device?

CapAdamT said:
Is the A526B (Snapdragon) as sold in the UK using BTU as the CSC considered a US device?
Click to expand...
Click to collapse
It's not. The U.S. variant is A526U and U1.

ShaDisNX255 said:
It's not. The U.S. variant is A526U and U1.
Click to expand...
Click to collapse
Did you try flashing other firmware from another region?

Zdrawko0o said:
Did you try flashing other firmware from another region?
Click to expand...
Click to collapse
Odin will only let you flash U and U1 firmware on them.

ShaDisNX255 said:
Odin will only let you flash U and U1 firmware on them.
Click to expand...
Click to collapse
He said that his device is SM-A526B, not SM-A526U1.

Zdrawko0o said:
He said that his device is SM-A526B, not SM-A526U1.
Click to expand...
Click to collapse
Ummmm did you check the post I was replying to. The question was, is this device a U.S. variant and I said no, the U.S. variant models are U and U1.

ShaDisNX255 said:
Ummmm did you check the post I was replying to. The question was, is this device a U.S. variant and I said no, the U.S. variant models are U and U1.
Click to expand...
Click to collapse
Yep. So he can flash another firmware.

Zdrawko0o said:
Yep. So he can flash another firmware.
Click to expand...
Click to collapse
Ah Ok, I see I misunderstood your question. I assumed you asked me can you flash firmware from another region on U.S. variant devices because you quoted my post where I mentioned the U and U1 variants.
So yeah, any region can be flashed on SM-A526B as long as it's the same model.

CapAdamT said:
Is the A526B (Snapdragon) as sold in the UK using BTU as the CSC considered a US device?
Click to expand...
Click to collapse
BTU doesn't relate to US at all. BTU is just a region code, code for UK.

CapAdamT said:
Is the A526B (Snapdragon) as sold in the UK using BTU as the CSC considered a US device?
Click to expand...
Click to collapse
I'm assuming this question was asked because you weren't getting the option to unlock the bootloader in download mode. Probably the date code wasn't working properly. What I suggest doing is flashing stock firmware with Odin. Completely wipe the phone. Then when you're setting up the phone for the first time, connect to a WiFi network on the setup screen. I've noticed that sometimes OEM Unlock gets bugged when this is skipped and it seems that topjohnwu also caught on to this because he explicitly includes it in his installation instructions of Magisk
Quote from Magisk Installation on Samsung devices:
Go through the initial setup. Skip through all the steps since data will be wiped again in later steps. Connect the device to Internet during the setup.
Click to expand...
Click to collapse
topjohnwu mentions Internet during the setup but I think it's worked for me better when I connect to a Wi-Fi network.
So after completely wiping the phone with Odin I suggest you connect to WiFi on setup and then check your developer settings again. Hopefully, OEM Unlock will be there without the need to do the date trick.

ShaDisNX255 said:
What I suggest doing is flashing stock firmware with Odin. Completely wipe the phone. Then when you're setting up the phone for the first time, connect to a WiFi network on the setup screen.
Click to expand...
Click to collapse
I actually tried that a while back... Had it connected to the internet using mobile data as well as WiFi, no luck. I'll try again in a few days time once my phone has been repaired by Samsung (warranty).

CapAdamT said:
I actually tried that a while back... Had it connected to the internet using mobile data as well as WiFi, no luck. I'll try again in a few days time once my phone has been repaired by Samsung (warranty).
Click to expand...
Click to collapse
Well, that warranty repair took longer than expected. I can now report that I am still facing the same issue. I tried setting it back up while connected to WiFi (speed shouldn't be an issue, I get gigabit speeds and on WiFi I've seen 400mbps).
After checking the bit in the download mode menu, seeing that there is no `unlock bootloader` option, and then booting into Android again, the setting just disappears again, after having enabled it before shutting the phone down.
Any ideas?

CapAdamT said:
Well, that warranty repair took longer than expected. I can now report that I am still facing the same issue. I tried setting it back up while connected to WiFi (speed shouldn't be an issue, I get gigabit speeds and on WiFi I've seen 400mbps).
After checking the bit in the download mode menu, seeing that there is no `unlock bootloader` option, and then booting into Android again, the setting just disappears again, after having enabled it before shutting the phone down.
Any ideas?
Click to expand...
Click to collapse
This is really strange, but I just wanted to add that I'm a U1 US variant owner that was just now looking into rooting and I came across this thread.... before even trying anything I'm already noticing I too have no OEM unlocking option in my dev settings. Really odd. I guess there's the very remote possibility my BL is already unlocked as I bought it used off eBay but I doubt it. I've run several OTAs so that seems very unlikely lol.
For me root is only desired to run Viper4Android so I'm not even 100% sure I want to bother with that now if it's going to be that steep an uphill battle.
---Edit--- Sorry, nevermind I'm dumb, the U1 Us models just aren't BL unlockable. Saw in another thread. All I want is root though, I don't need to flash roms or TWRP usage. Anyone know if that's still doable?

benjmiester said:
All I want is root though, I don't need to flash roms or TWRP usage. Anyone know if that's still doable?
Click to expand...
Click to collapse
That still needs an unlocked BL...

Related

Unlock bootloader of the LG V533

Hello everyone,
I want to unlock boot loader on my LG G PAD IV 8 (V533).
I did the OEM unlock in setting of developer options, But I couldn't reboot to bootloader and fastboot mode.
I tried:
1) adb reboot bootloader -> it reboots normally
2) Volume down and power and release power and hold all keys down --> IMEI display
3) Hold volume Up and connect USB --> Download mode (no fastboot)
4) Volume down and power and release power and hold back power --> factory reset
How can I enter to fastboot mode on this device so I can unlock the device? I don't find the key combination.
Thanks
Did you fimd any imfo on this yet???
Same situation. I did exactly the same thing you did and just found your post now.
No way at all to ROOT or Unlock LG V533 Bootloader ??
eggmama said:
Same situation. I did exactly the same thing you did and just found your post now.
Click to expand...
Click to collapse
Hi,
Looks like the Canadian variant of the LG GPad IV 8.0 is unrootable or unable to unlock the bootloader. However, the US T-Mobile variant (V530) which is essentially the same specs, is rootable according to other XDA post https://forum.xda-developers.com/g-pad-x-80/how-to/guide-root-lg-g-pad-v530-newbies-t3901485
Should any new info come up regarding this variant, feel free to post it here. Thanks
I just flashed 8.1 with a Korean kdz. onto an LG-V533 using LGUP Dual Mode. Next I will see about recovery, but for now pleased with the results. I got tired of searchig for American firmware with identical hardware.
mindlery said:
I just flashed 8.1 with a Korean kdz. onto an LG-V533 using LGUP Dual Mode. Next I will see about recovery, but for now pleased with the results. I got tired of searchig for American firmware with identical hardware.
Click to expand...
Click to collapse
Could you please tell us where to download it and how to flash? There's any tutorial around?
mindlery said:
I just flashed 8.1 with a Korean kdz. onto an LG-V533 using LGUP Dual Mode. Next I will see about recovery, but for now pleased with the results. I got tired of searchig for American firmware with identical hardware.
Click to expand...
Click to collapse
Did you simply use the LGUP Dev mode and flash the Korean kdz onto the V533 or did you modify anything somehow? Would like to try it but not familiar with flashing LG devices, only ZTE and HTC
That's correct. I am going from memory here, but i know i did not make any alterations of any kind prior. It will repartition the device and i'm not certain if you can revert.
I did it for a friend and it works well. You'll wind up with a few weird Korean apps. The ones you can't uninstall just use adb or app manager.
I am pretty sure the selection i used was "download" and it gave a warning about repartitioning. So obviously i did it. I think it froze during initial boot. I recall waiting far too long and just force rebooted and all was well. I am much more comfortable flashing a Motorola or Samsung myself. I've cross flashed a few Lg's now and they seem to work well.
Even though i spend a lot of time making sure it can work, you may get different results. Make sure it's charged good. I learned that one already. Let me know how it goes!
After your cross-flash, 3g/lte works? Your IMEI remains the same as original IMEI?
Thanks.
mindlery said:
That's correct. I am going from memory here, but i know i did not make any alterations of any kind prior. It will repartition the device and i'm not certain if you can revert.
I did it for a friend and it works well. You'll wind up with a few weird Korean apps. The ones you can't uninstall just use adb or app manager.
I am pretty sure the selection i used was "download" and it gave a warning about repartitioning. So obviously i did it. I think it froze during initial boot. I recall waiting far too long and just force rebooted and all was well. I am much more comfortable flashing a Motorola or Samsung myself. I've cross flashed a few Lg's now and they seem to work well.
Even though i spend a lot of time making sure it can work, you may get different results. Make sure it's charged good. I learned that one already. Let me know how it goes!
Click to expand...
Click to collapse
---------- Post added at 08:51 AM ---------- Previous post was at 08:49 AM ----------
Please let me know if you tried, fail or not. Thanks.
fuzzmania said:
Did you simply use the LGUP Dev mode and flash the Korean kdz onto the V533 or did you modify anything somehow? Would like to try it but not familiar with flashing LG devices, only ZTE and HTC
Click to expand...
Click to collapse
Sorry. I did it and it was successful
By this do you mean your IMEI remained the same (original IMEI)?
I would like to cross-flash in order to unlock the bootloader, then install TWRP. Thank you. Could you give more details about
(1) Your original model. I assume it was LG-V533 Canada Rogers or Telus.
(2) After cross-flashing, the model changed to ...? Have you tried "adb reboot bootloader" . Inside bootloader: "flashboot oem unlock"?
mindlery said:
Sorry. I did it and it was successful
Click to expand...
Click to collapse
sintoo said:
By this do you mean your IMEI remained the same (original IMEI)?
I would like to cross-flash in order to unlock the bootloader, then install TWRP. Thank you. Could you give more details about
(1) Your original model. I assume it was LG-V533 Canada Rogers or Telus.
(2) After cross-flashing, the model changed to ...? Have you tried "adb reboot bootloader" . Inside bootloader: "flashboot oem unlock"?
Click to expand...
Click to collapse
I have no idea. I did it to upgrade the OS and my buddy never intended to put in a SIM. I will see if i can get him to check. Pretty sure his ex has it now. But i'll check out the imei if possible. Should be able to tell by the first 9 digits. I never attempted unlocking the bootloader either Sorry i cannot help much beyond that.
---------- Post added at 03:16 PM ---------- Previous post was at 02:36 PM ----------
sintoo said:
By this do you mean your IMEI remained the same (original IMEI)?
I would like to cross-flash in order to unlock the bootloader, then install TWRP. Thank you. Could you give more details about
(1) Your original model. I assume it was LG-V533 Canada Rogers or Telus.
(2) After cross-flashing, the model changed to ...? Have you tried "adb reboot bootloader" . Inside bootloader: "flashboot oem unlock"?
Click to expand...
Click to collapse
I have no idea. I did it to upgrade the OS and my buddy never intended to put in a SIM. I will see if i can get him to check. Pretty sure his ex has it now. But i'll check out the imei if possible. Should be able to tell by the first 9 digits. I never attempted unlocking the bootloader either Sorry i cannot help much beyond that.
hrh0001 said:
Hello everyone,
I want to unlock boot loader on my LG G PAD IV 8 (V533).
I did the OEM unlock in setting of developer options, But I couldn't reboot to bootloader and fastboot mode.
I tried:
1) adb reboot bootloader -> it reboots normally
2) Volume down and power and release power and hold all keys down --> IMEI display
3) Hold volume Up and connect USB --> Download mode (no fastboot)
4) Volume down and power and release power and hold back power --> factory reset
How can I enter to fastboot mode on this device so I can unlock the device? I don't find the key combination.
Thanks
Click to expand...
Click to collapse
Hello
Does anyone have any active custom rom links/tutorials for V533 and V497? seems all online are down or gone? Thx

A10 locked to sprint no oem lock in developer options.

Hi!
New here, hope I am in the right place...I have limited tech skills (born pre cell phones and computers) I did manage to install a custom ROM on an old HTC years ago, and thought I could do it again!
I have a Samsung A10e (SM-A102U) locked to sprint.
I can get the developer options but can't get the OEM unlock option. I also can't wait 7 days. Have tried a few things with the date and turning off updates etc, nothing worked. Here is what I am trying to do in order (please correct me if it is the wrong order) Ultimately I want my phone unlocked for use with any sim, and install a custom rom, to remove some bloatware. Could I wipe the phone totally take it to a piece of memory with no ROM and then re-load it, or use ADB to do it? Please excuse my ignorance - if I sound clueless I kinda am!
1. Unlock the bootloader
2. Install TWRP
3. Install custom ROM
It has taken me days of searching but to no avail, literally pulling my hair out. Happy to buy a beer for anyone that helps!
Wow,thanks...
Response has been overwhelming...
SandsCayman said:
Hi!
New here, hope I am in the right place...I have limited tech skills (born pre cell phones and computers) I did manage to install a custom ROM on an old HTC years ago, and thought I could do it again!
I have a Samsung A10e (SM-A102U) locked to sprint.
I can get the developer options but can't get the OEM unlock option. I also can't wait 7 days. Have tried a few things with the date and turning off updates etc, nothing worked. Here is what I am trying to do in order (please correct me if it is the wrong order) Ultimately I want my phone unlocked for use with any sim, and install a custom rom, to remove some bloatware. Could I wipe the phone totally take it to a piece of memory with no ROM and then re-load it, or use ADB to do it? Please excuse my ignorance - if I sound clueless I kinda am!
1. Unlock the bootloader
2. Install TWRP
3. Install custom ROM
It has taken me days of searching but to no avail, literally pulling my hair out. Happy to buy a beer for anyone that helps!
Click to expand...
Click to collapse
I have the exact same question.
it will not happen alot of us based carriers will lock down the phone via bootloader our best option is to find combination firmware and hopefully find root that way assuming that method still works.
Same situation here with Verizon. And sorry to tell you but I don't think anything will happen for you after seven days either, at least nothing did for me. I've spent a long time trying to get past this with no success, trying every trick I've found (the changing the date manually trick, factory resetting and trying on WiFi, etc.).
Also, using the app "Settings Database Editor," I've found the config/property where OEM bootloader unlock has been disabled:
"sys.oem_unlock_allowed" "0"
Screenshot here.
I'm hoping maybe we can edit that property via ADB or something. I'm not really holding out any hope here though. :-/
One other random discovery (not really helpful or relevant for our OEM bootloader unlock goal, but something I discovered while trying to obtain unlock): I believe I discovered a firmware error (at least on the Verizon build). When you hold volume up + power together for about 30 seconds, the phone shows the recovery menu for a split second but then instantly/immediately wipes all data and factory resets, without ever allowing the user to choose their own recovery menu selection and without giving any reset confirmation prompt before instantly wiping all user data. It's not supposed to work that way, according to the phone's user manual/Samsung technical support instruction. It's actually really pissed me off because I've triggered this instant reset twice now by accident just by having the phone in my back pocket and sitting down. I go to pick up my phone from my pocket and notice the screen is on and then discover everything was wiped. Very annoying! I called Samsung customer support twice to try to explain that I believe there to be a firmware error present (at least on Verizon models) but they didn't seem to care/their support script told them to have me take the device to some local authorized third-party screen repair place. One good outcome I've discovered from factory resetting the phone is that you can at least avoid enrolling the phone in part of the Knox security crap, the "kme" protection. I originally couldn't use remote apps like TeamViewer or AnyDesk without some stupid "Protected by Knox" notification popping up and then my remote app instantly exiting. Made me so angry. But now I'm able to use those apps without any issue. Though, the phone does try to have me agree to enroll in kme protection or whatever about once a day and I have to manually close the enrollment agreement form that pops up.
allenjthomsen said:
it will not happen alot of us based carriers will lock down the phone via bootloader our best option is to find combination firmware and hopefully finwww reset that way assuming that method still works.
Click to expand...
Click to collapse
I've had the same issue with entire A series. All OEM's are disabled regardless of carrier. It seems to be part of Samsung's firmware. After nothing but dead ends and contacting samsung directly i was left scratching my head. Came here searching for some insights I may have overlooked.
-Enable developer options
-Enable wifi
-Join a network
-Change date to 10 days forward
-Reboot phone
-OEM unlock will be available
Thank me later
moe7863 said:
-Enable developer options
-Enable wifi
-Join a network
-Change date to 10 days forward
-Reboot phone
-OEM unlock will be available
Thank me later
Click to expand...
Click to collapse
Nothing happens/doesn't work for Verizon. :-/
I mentioned having tried this technique already in my previous post above.
---------- Post added at 07:42 PM ---------- Previous post was at 07:38 PM ----------
For what it's worth, here's a sister thread I started on this topic with a few responses/potential bootloader unlock ideas shared by other members but no real solid progress made at this point:
https://forum.xda-developers.com/galaxy-a10/help/samsung-galaxy-a10e-to-t3990817/page4
the bl is not unlockable
Bump
I know this is possible I've seen it done before. I think it had to do with a modified ota update.
SHAD0WUSER said:
Bump
I know this is possible I've seen it done before. I think it had to do with a modified ota update.
Click to expand...
Click to collapse
Do you have proof of this being done?
Because as far as I'm aware, it's been impossible to unlock bootloader for years
I actually purchased this phone from Metro last week after searching for it on XDA and seeing that is was BL unlockable. I didn't realize any the time that this was only the international variants. Good luck to all devs whose skillset is better than my own.
ShaDisNX255 said:
Do you have proof of this being done?
Because as far as I'm aware, it's been impossible to unlock bootloader for years
Click to expand...
Click to collapse
it is not possible.. also u cant flash a modified ota cuz it will fail sig check
nateberhardt81 said:
I actually purchased this phone from Metro last week after searching for it on XDA and seeing that is was BL unlockable. I didn't realize any the time that this was only the international variants. Good luck to all devs whose skillset is better than my own.
Click to expand...
Click to collapse
if u looked u would have seen the model numbers are different
elliwigy said:
if u looked u would have seen the model numbers are different
Click to expand...
Click to collapse
Yeah... I I knew better than to just look at a10e and assume they were all the same. I went through the same struggle with a J7 not too long ago... Should have learned my lesson then.
nateberhardt81 said:
Yeah... I I knew better than to just look at a10e and assume they were all the same. I went through the same struggle with a J7 not too long ago... Should have learned my lesson then.
Click to expand...
Click to collapse
no biggie.. at least those r super cheap.. i got a a50 just to brick it to try an exploit that didnt work lol.. o well
I have an A10e as well but the model number is SM-S102DL, I am a complete novice when it comes t phones but will I be able to root this without unlocking the bootloader?
xSpookyx said:
I have an A10e as well but the model number is SM-S102DL, I am a complete novice when it comes t phones but will I be able to root this without unlocking the bootloader?
Click to expand...
Click to collapse
no.. are u sure u have a a10e?
you cant root without exploits that dknt exist without unlocking the bootloader
No matter about root. but I converted many of Samsung A10e to international variant to remove any boost metropcs or any other networks bloatware application.
you can also do it without any issue. Simply flash A102U1 Firmware. I m not sure that it will work on Network Locked/Sim locked devices. I flash and convert it after using a remote unlocking service which already changed the CSC version of EFS to XAA from the BST csc...
XAA is for US Unlocked Without carrier locked phones and BST for Boost mobile carrier only which came with lots of boost bloatwares but maybe that A10e boost remote unlock service saved me.
check the screenshot attached.
Shabby The Dev said:
No matter about root. but I converted many of Samsung A10e to international variant to remove any boost metropcs or any other networks bloatware application.
you can also do it without any issue. Simply flash A102U1 Firmware. I m not sure that it will work on Network Locked/Sim locked devices. I flash and convert it after using a remote unlocking service which already changed the CSC version of EFS to XAA from the BST csc...
XAA is for US Unlocked Without carrier locked phones and BST for Boost mobile carrier only which came with lots of boost bloatwares but maybe that A10e boost remote unlock service saved me.
check the screenshot attached.
Click to expand...
Click to collapse
Careful, don't post your IMEI on the internet as some bad people can do stuff with it

Sonim xp5s XP5800 bootloader, firmware and unlock questions

Hi, all. Please help me with some issues. Have Sonim XP5s dualsim gsm phone ATT locked.
1 Bootloader. Trying to unlock it.
*#*#2387#*#* activated USB debug. Set OEM unlock, but bootloader locked. fastboot unlock, fastboot oem unlock, fastboot flashing unlock do nothing. How i can unlock it?
2 Firmware. Does anyone have image to flash with QFIL? I try to flash empty one but QFIL say timeout and take no action. EDL started but ignore all requests. Bootloader issue?
3 SIM2 activation. Phone disable second SIM at all. Need correct firmware?
4 ATT unlock. How i can do it, with correct firmware installed?
5 Root. Kingroot, kingoroot no success. Custom recovery not found. Flashing\booting custom recovery is locked.
Thanks.
bumpity-bump
I have the same phone that I just bought and (sheepishly) just found out has wi-fi calling disabled by AT&T. That was a main reason for getting it, but unfortunately I went by the Sonim website's info and not AT&T's regarding that feature. Verizon's version has it enabled, but it's also much scarcer on the secondary market. The XP5800 doesn't seem to be a popular phone for tinkering judging by the lack of info on doing so.
Does anyone know if wi-fi calling could hypothetically be activated by rooting and then toggling some values, or is it more likely that the involved code was omitted entirely? I saw something to the former about tethering.
Bit_Basher said:
be activated by rooting and then
Click to expand...
Click to collapse
Still have found no rooting way. Bootloader locked, so no custom recovery can be used. Very unpopular phone, as you see, thread dead.
SpectralUA said:
Still have found no rooting way. Bootloader locked, so no custom recovery can be used. Very unpopular phone, as you see, thread dead.
Click to expand...
Click to collapse
Each Android can get rooted by means of SuperSU ZIP. Only requirement is to have successfully USB debugging option enabled in Android->Settings->Developer options. You install this ZIP via phone's stock recovery.
To access developer mode, google "developer mode sonim xp5s". Open article: kb.eschat.com "Open Developer Options Tab on Sonim XP5, XP5s or XP3...". The device will then open the Developer Options tab. Ensure the take bug report option is enabled, and that USB debugging is also enabled. You may also add a menu button to the Power tab for future access to this feature.
Be sure you use a clean SuperSU ZIP to avoid malware. Suggest getting one from the xda forum.
Hi. Is there any success with rooting or enabling second sim to working 2 sims together?
jwoegerbauer said:
Each Android can get rooted by means of SuperSU ZIP. Only requirement is to have successfully USB debugging option enabled in Android->Settings->Developer options. You install this ZIP via phone's stock recovery.
Click to expand...
Click to collapse
How i can do it? Stock recovery have no menu. /cache access denided from user. Putting update.zip do nothing without /cache/recovery/command. Did you know some trick to proceed install? ADB debugging enable, but no root rights there.
haikkk said:
Hi. Is there any success with rooting or enabling second sim to working 2 sims together?
Click to expand...
Click to collapse
Nothing.
Here are the firmware images for the Sprint XP5s
5SA.0.4-05-8.1.0-29.33.00_USER_PST.zip
Root has been achieved with Magisk!
ytagger said:
Root has been achieved with Magisk!
Click to expand...
Click to collapse
Is there any way to get Android Auto to work on the XP5s?
Hello All.
sorry for off topic, but can’t find anywhere.
does anybody know how to remove PIN on Sonim XP5s? Can’t access phone without entering PIN.
I would really appreciate for any help.
Thank you.
bkarshibaev said:
how to remove PIN on Sonim XP5s?
Click to expand...
Click to collapse
Recovery mode. Power + volUp long to show menu. Factory reset.
SpectralUA said:
Recovery mode. Power + volUp long to show menu. Factory reset.
Click to expand...
Click to collapse
Hello SpectralUA,
Does it really remove PIN?
I’m planning on buying Sonim XP5s and send it overseas. I just want to be 100% sure that Recovery mode will remove PIN.
Thank you.
bkarshibaev said:
Hello SpectralUA,
Does it really remove PIN?
I’m planning on buying Sonim XP5s and send it overseas. I just want to be 100% sure that Recovery mode will remove PIN.
Thank you.
Click to expand...
Click to collapse
Yes, it does, except if Factory Reset is blocked by Scout
ytagger said:
Yes, it does, except if Factory Reset is blocked by Scout
Click to expand...
Click to collapse
Is there way to check if Scout has restriction?
also, do you know which XP5s (AT&T, SouthernLinc, Sprint or Verizon) has wifi calling enabled and 2nd sim card slot is unlocked? I mean unlocked version of those 3 carriers.
Thank you.
bkarshibaev said:
Is there way to check if Scout has restriction?
Click to expand...
Click to collapse
Not if the device is PIN locked and you don't know it, obviously .
If it's open, just try to reset the phone from the regular menu and you'll see if it's restricted
bkarshibaev said:
2nd sim card slot is unlocked?
Click to expand...
Click to collapse
2nd sim usable without 1st. Found no way to enable both at same time.
Maybe anyone know how to dualsim (standby mode, etc) this unit?
ytagger said:
Here are the firmware images for the Sprint XP5s
5SA.0.4-05-8.1.0-29.33.00_USER_PST.zip
Click to expand...
Click to collapse
The link is not working. Do you have a different one?

Question Oem unlock

I have the galaxy a02s (sm-a25v) I have tried every think I can find on the net to get the oem unlock toggle switch to show up in developers option. Just waited the 7 days and still nothing any ideas on this?
xrebelhellx said:
I have the galaxy a02s (sm-a25v) I have tried every think I can find on the net to get the oem unlock toggle switch to show up in developers option. Just waited the 7 days and still nothing any ideas on this?
Click to expand...
Click to collapse
North American Samsung models have not had user-unlockable bootloaders for years. That's just how it is.
If you want an unlockable model, buy an international version
Thanks may just do that
Have you tried to use fastboot oem unlock?
3356 said:
Have you tried to use fastboot oem unlock?
Click to expand...
Click to collapse
Samsung models don't have fastboot mode. And even on the models that do, the command is no longer "fastboot oem unlock"
3356 said:
Have you tried to use fastboot oem unlock?
Click to expand...
Click to collapse
I've tried everything. It's just not gona happen on this model. Is what it is but I'm not giving up just yet. Who knows might just get lucky and find away before it's all said and done.
xrebelhellx said:
I've tried everything. It's just not gona happen on this model. Is what it is but I'm not giving up just yet. Who knows might just get lucky and find away before it's all said and done.
Click to expand...
Click to collapse
What's the current Baseband Version of your device?
iBowToAndroid said:
What's the current Baseband Version of your device?
Click to expand...
Click to collapse
AO25VSQU1BUH2
xrebelhellx said:
AO25VSQU1BUH2
Click to expand...
Click to collapse
There is a way to BL unlock many North American models, but that's not one of them unfortunately. Sorry
iBowToAndroid said:
There is a way to BL unlock many North American models, but that's not one of them unfortunately. Sorry
Click to expand...
Click to collapse
Yeah thats my luck to. Still I like the phone. Thanks for the help
iBowToAndroid said:
North American Samsung models have not had user-unlockable bootloaders for years. That's just how it is.
If you want an unlockable model, buy an international version
Click to expand...
Click to collapse
How to know the version of my mobile ?
I mean how to know did I have international version or not ?
Thanks in advance!
Mahmoudm.kamal said:
How to know the version of my mobile ?
I mean how to know did I have international version or not ?
Thanks in advance!
Click to expand...
Click to collapse
International model numbers end in B, F, FN, G, H, N, or 0
North American model numbers end in A, AZ, P, T, T1, U, U1, V, or W
iBowToAndroid said:
International model numbers end in B, F, FN, G, H, N, or 0
North American model numbers end in A, AZ, P, T, T1, U, U1, V, or W
Click to expand...
Click to collapse
got it. Thanks
iBowToAndroid said:
International model numbers end in B, F, FN, G, H, N, or 0
North American model numbers end in A, AZ, P, T, T1, U, U1, V, or W
Click to expand...
Click to collapse
I have A025FXXS2BUF1
is this international version .... please help me bcz I unlock bootloader and after root ... I fash stock firmware and unroot and lock bootloader how to unlock again...bcz oem unlock not showing in dev options
You say that the North American variant is not unlockable. But yet I have an unlocked bootloader. It tells me when I go into developer options and see the grayed out OEM unlock. Just underneath. It says "bootloader already unlocked". To achieve unlocking the bl. I I've had to press the side keys. I can't honestly tell you if it was all three keys or two keys. But it definitely involved holding the keys on the side of the phone. And you have to do it as the phone is booting up. As soon as you push the power button you hold the keys I think it might be all three keys.
anyemail702 said:
You say that the North American variant is not unlockable. But yet I have an unlocked bootloader. It tells me when I go into developer options and see the grayed out OEM unlock. Just underneath. It says "bootloader already unlocked". To achieve unlocking the bl. I I've had to press the side keys. I can't honestly tell you if it was all three keys or two keys. But it definitely involved holding the keys on the side of the phone. And you have to do it as the phone is booting up. As soon as you push the power button you hold the keys I think it might be all three keys.
Click to expand...
Click to collapse
anyemail702 said:
You say that the North American variant is not unlockable. But yet I have an unlocked bootloader. It tells me when I go into developer options and see the grayed out OEM unlock. Just underneath. It says "bootloader already unlocked". To achieve unlocking the bl. I I've had to press the side keys. I can't honestly tell you if it was all three keys or two keys. But it definitely involved holding the keys on the side of the phone. And you have to do it as the phone is booting up. As soon as you push the power button you hold the keys I think it might be all three keys.
Click to expand...
Click to collapse
There are a few very rare exceptions, mostly in the A series
ladlabaloch512 said:
I have A025FXXS2BUF1
is this international version .... please help me bcz I unlock bootloader and after root ... I fash stock firmware and unroot and lock bootloader how to unlock again...bcz oem unlock not showing in dev options
Click to expand...
Click to collapse
This has also happened to me. I flashed stock rom to unbrick my A02sm that I was attempting to install a custom rom on, I used the exact same stock rom as before but now the OEM unlock simply doesn't exist and I've tried every solution I've found so far, yet nothing worked.
Noobiu said:
This has also happened to me. I flashed stock rom to unbrick my A02sm that I was attempting to install a custom rom on, I used the exact same stock rom as before but now the OEM unlock simply doesn't exist and I've tried every solution I've found so far, yet nothing worked.
Click to expand...
Click to collapse
i as well had mine boot unlock but i installed some dumd app the corrupted it re installed sam stock worked tried root and faile causing a trigger that said i installed un official bianaris efectively locking me into bull crap mode that doesnt go away till after 7 days and from what ive read online this late in the times we r in limbo cuz the lock wont self update and wont tell it to to re allow oem lock cus the server for that has stoped beingused or so no server no oem switch no boot unlock no custm rom

Question Oem unlock problem help

Samsung A02s(SM-A025F)
I do these steps any body help
1.I unlock oem through developer option
2.I unlock bootloader successfully
3.I downloaded firmware and patch AP with magisk to root
4.I flash Patched AP
5.After getting my phone rooted successfully I want to install TWRP Recovery
6.I downloaded unofficial version of TWRP from xdaforums....
7.I followed the steps guided here
The steps are as follows
1.reboot to boot loader and flash vbmeta_disable.tar
2.Put TWRP tar in AP and flash
3.Reboot to recovery
4.Disable encryption
Go to Advanced >Terminal : type "multidisabler"
5.Go back to wipe>Format Data>type "yes"
6.Reboot system
This is my first experience to root and flash TWRP.... but after that when I reboot my phone got lock .... only official binaries allowed to be installed....and stuck there
I got frightened so I locked my bootloader
But nothing happens...
I downloaded stock firmware and flash.....now my phone works perfectly But I want to root my phone I searched and found a correct way to root but now oem unlock option is not found in developer options....
I watched hundreds of videos on yt and searched a lot on Google but
found no proper solution.....someone tell me to wait 7 days....
In about phone> phone status>uptime
Uptime should be equal to 7days... then oem unlock option will appear but ...... I want another solution date change and WiFi connect is not solution ... If any body knows any other solution please guide me ... I'll be very thankful.....
@ladlabaloch512
Perhaps your device has the same "OEM unlock" block like mine.
On mine I was supposed to wait 7d after turning on dev options.
I bypassed that by
1. switching to airplane mode
2. Setting manually date back one month
3. Restart (still in airplane mode)
4. Turning off airplane mode and let it sync date
and voila OEM unlock option was there.
Perhaps that works on your device as well.
bmwdroid said:
@ladlabaloch512
Perhaps your device has the same "OEM unlock" block like mine.
On mine I was supposed to wait 7d after turning on dev options.
I bypassed that by
1. switching to airplane mode
2. Setting manually date back one month
3. Restart (still in airplane mode)
4. Turning off airplane mode and let it sync date
and voila OEM unlock option was there.
Perhaps that works on your device as well.
Click to expand...
Click to collapse
Thanks for reply...
This bypass method doesn't work in my device
Im too
i have tried everything But I read on somewhere that policy was upgrade to 1000 hours so i waited and hopping thats work!
Now it's almost 700 and i restarted before it on 200 so it's supposed to be 900
Mahmoudm.kamal said:
Im too
i have tried everything But I read on somewhere that policy was upgrade to 1000 hours so i waited and hopping thats work!
Now it's almost 700 and i restarted before it on 200 so it's supposed to be 900
Click to expand...
Click to collapse
Keep us updated.. I'd like to get my OEM unlock to come out of hiding.. this is frustrsting.. i see all these tutorials for the A02s root, twrp and ROMs and whatnot and I'm itching to get flashing!
Is it possible to flash an unlocked carrier firmware in ODIN and then be able to unlock OEM? Without carrier issues or anything? I'm a little nervous to be the first to try.. and not sure where to find US unlocked carrier firmware or if location even matters... I have the SM-A025AZ (US Cricket variant).. I guess as long as Download Mode (fastboot) is still accessible I could just flash the Cricket version back to the device.. bricked my LG-E980 back in the day.. took me a few months how to get it back up and running with LG flash tool.. i just dont want to repeat that fiasco lol... so anybody got any updates on hacking this OEM (un)lock bs??? Or any idea on flashing some other variant to the device without interrupting carrier stuff??.. seems like alot just to get a damn virtual switch to turn on.. but damnit I need root access! Lol.. about to just exchange this phone for an actual rootable phone.. i disagree with charging for hotspot.. that should be illegal.. getting charged twice to use th same bs internet.. eff that.. i just want Rooooooot!!!
Hello,
I have also been having these troubles, with no way to unlock oem after stock flash, and the closest I've got to finding a solution was this, but I simply cannot find samsung's bootloader unlocking form like it says in the guide. I bought my phone just for a bootloader unlockable version (A025M), and now I am very angry at samsung.
also, since over a 1000 hours have gone by since last post, have any one of you solved this issue just by waiting?
Noobiu said:
Hello,
I have also been having these troubles, with no way to unlock oem after stock flash, and the closest I've got to finding a solution was this, but I simply cannot find samsung's bootloader unlocking form like it says in the guide. I bought my phone just for a bootloader unlockable version (A025M), and now I am very angry at samsung.
also, since over a 1000 hours have gone by since last post, have any one of you solved this issue just by waiting?
Click to expand...
Click to collapse
Nope, More than 2000 hours and also changed firmwares and waited again an again and tried alot of ways but enable oem still disappeared
Im also very angry from samsung
Mahmoudm.kamal said:
Nope, More than 2000 hours and also changed firmwares and waited again an again and tried alot of ways but enable oem still disappeared
Im also very angry from samsung
Click to expand...
Click to collapse
its not only samsung that does this, many other companies like motorola does this. Dont be angry, just try a different device. Also, snapdragon US models (i dont think) arent able to be unlocked. If its a mediatek model and isnt sim/carrier locked, u can try MTKClient
Swyen said:
its not only samsung that does this, many other companies like motorola does this. Dont be angry, just try a different device. Also, snapdragon US models (i dont think) arent able to be unlocked. If its a mediatek model and isnt sim/carrier locked, u can try MTKClient
Click to expand...
Click to collapse
Yes dear, i had changed it since more than 7 months with A52S , thanks.
Mahmoudm.kamal said:
Yes dear, i had changed it since more than 7 months with A52S , thanks.
Click to expand...
Click to collapse
And, my A037W doesnt have the OEM Unlock option. Use an MTK tool to unlock it, thats how I did it
ewrecc said:
Is it possible to flash an unlocked carrier firmware in ODIN and then be able to unlock OEM? Without carrier issues or anything? I'm a little nervous to be the first to try.. and not sure where to find US unlocked carrier firmware or if location even matters... I have the SM-A025AZ (US Cricket variant).. I guess as long as Download Mode (fastboot) is still accessible I could just flash the Cricket version back to the device.. bricked my LG-E980 back in the day.. took me a few months how to get it back up and running with LG flash tool.. i just dont want to repeat that fiasco lol... so anybody got any updates on hacking this OEM (un)lock bs??? Or any idea on flashing some other variant to the device without interrupting carrier stuff??.. seems like alot just to get a damn virtual switch to turn on.. but damnit I need root access! Lol.. about to just exchange this phone for an actual rootable phone.. i disagree with charging for hotspot.. that should be illegal.. getting charged twice to use th same bs internet.. eff that.. i just want Rooooooot!!!
Click to expand...
Click to collapse
STOP TRYING TO UNLOCK A US DEVICE ITS NOT POSSIBLE
Swyen said:
And, my A037W doesnt have the OEM Unlock option. Use an MTK tool to unlock it, thats how I did it
Click to expand...
Click to collapse
Which tool did you use?

Categories

Resources