I tried to install Project Elixir and my phone is hard bricked now... Brick is result of attempting to boot system on TWRP, slot A. Device is in EDL state I guess, because when I connect it by USB, it shows in device manager. I downloaded necessary driver and MiFlash, but I receive information that it can't connect to device: "write time out, maybe device was disconnected". I also removed back cover to find some test spots, but I can't find them. Is it something I can do?
Are you sure you use the right cable? There are USB cables only suitable for charging not for data communication.
user345643234 said:
I tried to install Project Elixir and my phone is hard bricked now... Brick is result of attempting to boot system on TWRP, slot A. Device is in EDL state I guess, because when I connect it by USB, it shows in device manager. I downloaded necessary driver and MiFlash, but I receive information that it can't connect to device: "write time out, maybe device was disconnected". I also removed back cover to find some test spots, but I can't find them. Is it something I can do?
Click to expand...
Click to collapse
This video may help you
You may contact the following person he will surely help you
RKD DEVIL YT OFFICIAL GROUP🗨
Xiaomi | Realme | Oppo | Vivo | Samsung | IPhone | Tecno | Itel | Nokia Etc All Models ➡️ Unbrick_Unlock Service Remotely Via Team viewer⬅️ For Orders Contact Owner only :- https://wa.me/917001105863 ⭐️Official Telegram Channel of RKD DEVIL♥️
t.me
[email protected]
michielm74 said:
Are you sure you use the right cable? There are USB cables only suitable for charging not for data communication.
Click to expand...
Click to collapse
I remember that I used this cable to transfer .zip OS file to phone, so transferring was working under TWRP earlier.
mvikrant97 said:
This video may help you
You may contact the following person he will surely help you
RKD DEVIL YT OFFICIAL GROUP🗨
Xiaomi | Realme | Oppo | Vivo | Samsung | IPhone | Tecno | Itel | Nokia Etc All Models ➡️ Unbrick_Unlock Service Remotely Via Team viewer⬅️ For Orders Contact Owner only :- https://wa.me/917001105863 ⭐️Official Telegram Channel of RKD DEVIL♥️
t.me
[email protected]
Click to expand...
Click to collapse
Unfortunately Mi 11i has different layout of things under the back cover than phone presented in video.
user345643234 said:
I remember that I used this cable to transfer .zip OS file to phone, so transferring was working under TWRP earlier.
Unfortunately Mi 11i has different layout of things under the back cover than phone presented in video.
Click to expand...
Click to collapse
Actually yes I just gave you an idea of how things would work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
user345643234 said:
I tried to install Project Elixir and my phone is hard bricked now... Brick is result of attempting to boot system on TWRP, slot A. Device is in EDL state I guess, because when I connect it by USB, it shows in device manager. I downloaded necessary driver and MiFlash, but I receive information that it can't connect to device: "write time out, maybe device was disconnected". I also removed back cover to find some test spots, but I can't find them. Is it something I can do?
Click to expand...
Click to collapse
i think Miflash tool wont work in EDL mode, refer this guide this might help you revive your phone :
Download QPST Flash Tool & How to Use it to Flash Firmware on Qualcomm Android Devices
Download all versions of QPST Flash tool and learn how to use the QFIL and Software Download programs to flash firmware files on Qualcomm Android devices.
www.thecustomdroid.com
mvikrant97 said:
Actually yes I just gave you an idea of how things would work.
View attachment 5726623
Click to expand...
Click to collapse
Ok. This layout is also different too. I can't find these two holes under the hood.
asad007 said:
i think Miflash tool wont work in EDL mode, refer this guide this might help you revive your phone :
Download QPST Flash Tool & How to Use it to Flash Firmware on Qualcomm Android Devices
Download all versions of QPST Flash tool and learn how to use the QFIL and Software Download programs to flash firmware files on Qualcomm Android devices.
www.thecustomdroid.com
Click to expand...
Click to collapse
Thanks. Tbh I'm not sure, if it's even in EDL mode, because I noticed that QPST shows infinitely loading green bar in "State" column. Phone reacts to + and power buttons, because when I press it, MiFlash and QPST don't even recognize it properly. When I press - and power buttons, device is recognized in MiFlash. In QPST there is also some info about it.
user345643234 said:
Ok. This layout is also different too. I can't find these two holes under the hood.
Thanks. Tbh I'm not sure, if it's even in EDL mode, because I noticed that QPST shows infinitely loading green bar in "State" column. Phone reacts to + and power buttons, because when I press it, MiFlash and QPST don't even recognize it properly. When I press - and power buttons, device is recognized in MiFlash. In QPST there is also some info about it.
Click to expand...
Click to collapse
Do you have appropriate drivers installed? QD loader 9008 drivers
mvikrant97 said:
Do you have appropriate drivers installed? QD loader 9008 drivers
Click to expand...
Click to collapse
Yes. Before I installed this driver I saw that device is under exclamation/warning mark in device manager. Now there is no warning.
user345643234 said:
Yes. Before I installed this driver I saw that device is under exclamation/warning mark in device manager. Now there is no warni
Click to expand...
Click to collapse
user345643234 said:
Yes. Before I installed this driver I saw that device is under exclamation/warning mark in device manager. Now there is no warning.
Click to expand...
Click to collapse
Please share the screenshot of device manager when your device is connected to the computer.
mvikrant97 said:
Please share the screenshot of device manager when your device is connected to the computer.
Click to expand...
Click to collapse
Ok:
user345643234 said:
Ok:
View attachment 5727943
Click to expand...
Click to collapse
Please follow this guide but you may need paid tools or approach someone who does charge for such services
Follow this link
Related
Device: LG-D325
I tried rooting, unlocking bootloader, and installing custom rom (this link).
I successfully gained root & unlocked bootloader. Than it all went down.
I flashed recovery and booted into it, using "fastboot boot recovery.img" command.
I flashed cm12.1 and after that I got the "purple screen" error.
When phone is off and I try to normally turn it on:
1st screen:
Code:
Secure booting error!
Cause: boot certification verify
2nd screen:
Code:
DemiGod Crash Handler : DBI Err Fatal!
Board Rev.: 1.0
Ram dump mode.
Option : SD card ram dump mode.
Push below files to sd card before test.
rdcookie.txt, rtcookie.txt
Please do following action.
1) Ram dump Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
3) If sdcard ram dump enabled just wait for reboot.
4) Collect ramdump files from your pc or sdcard.
5) Send e-mail to [email protected]
The same happens when I plug in the USB cable when phone shut off.
Also, I cannot enter the fastboot menu (previously I could - before flashing CM12.1 via recovery) using volume UP + power buttons. Therefore, I cannot enter recovery.
Any info on this situation?
You need to short the test point of your phone and force the phone to qhsusb dload mode after that boot repair
it will repair your phone's download mode
And flash the phone
Br
Shahzaib Jahangir
Is there any way to fix this problem bro with out jtak
Thanks.
The test point method is not the JTAG method
razeen said:
Is there any way to fix this problem bro with out jtak
Thanks.
Click to expand...
Click to collapse
Use the test point method. It works very well and it's quite easy. But first I recommend you try "LG Flash Tool 2014" . If that works, no need to open up the phone for test point method. If you are already seeing pink screen demigod error DBI fatal error, no need to go for JTAG I think.
Feel free to ask if you need assistance for testpoint method. I have already published the method for few other people here on XDA. A little search will bring you there
my Lg325 also violet and dump mode cant flash i go to celpon repair but they cant fix my pon pls help me tnx
gilliane.08 said:
my Lg325 also violet and dump mode cant flash i go to celpon repair but they cant fix my pon pls help me tnx
Click to expand...
Click to collapse
May be I can help you. But first you need a PC, a good internet connection and patience.. If you're interested, reply me.. I will guide you how to unbrick or come out from that pink screen/demi-god screen
honeybun.1986 said:
May be I can help you. But first you need a PC, a good internet connection and patience.. If you're interested, reply me.. I will guide you how to unbrick or come out from that pink screen/demi-god screen
Click to expand...
Click to collapse
same problem here
can you help, please?
LG D325f L70
UPDATE
Now i have QDLoader 9008 (i've installed driver manually without signature). I don't know why my computer did not recognise automatically installed drivers
Else i trieb Board diag
I,ve tried QFIL QPST and recieved
/*invalid image type recieved*/
is_ack_succesfull : 1031 SAHARA_NAK_INVALID_IMAGE_TYPE
sahara protocol error
uploading image using sahara protocol failed
Before that
BoardDiag 3.99c I have an error
AP CHECK START
FAILED during loading flash programmer
There were already messages about this trouble,but there are no solution, so i am asking for it.
LGE AndroidNet USB
qhsusb_bulk
Previously i had Pink screen and Lg Pc Suite could recognize my phone
I,ve tried Format to Fat32 my inner phone emmc(i did not insert in my phone microSD card) DiskImageRev2.zip and LoaderD325.img. After format to fat32 it was 4gb.When i,ve installed loader.img it became 64mb with 2 folders in it. Device monitor showed the phone as qhsusb_bulk (i already had istalled Qualcomm drivers) After installation of LGMobileDriver_WHQL_Ver_4.0.4.exe ( 12,39 МБ )
It was recognised as LGE AndroidNet USB. (com port 3) After that i tried LgFlash tool (tot and kdz firmware,it showed error on 50%) 2014 and BoardDiag also showed error .
I can not convert it to Qualcomm HS-USB QDLoader 9008 (I saw many articles where people with qhsusb_bulk converted it to Qualcomm 9006 after installation of qualcomm drivers,but it did not works for me. Please help
Any ideas? I heared about SRK tool 2.1 Does it works for my Lg L70 D325? Or maybe QPST, or ADP
honeybun.1986 said:
May be I can help you. But first you need a PC, a good internet connection and patience.. If you're interested, reply me.. I will guide you how to unbrick or come out from that pink screen/demi-god screen
Click to expand...
Click to collapse
Please help me
My lG D325 cant on recovery and download mode. Fatal error. Who can help me
Gayan360 said:
My lG D325 cant on recovery and download mode. Fatal error. Who can help me
Click to expand...
Click to collapse
I think you are referring to the famous "purple screen" mode. Relax, that is not hard to get pass.
Follow the steps below.
But, be warned, I am not responsible for any damage caused by following these methods.
Your phone's battery has to be charged at least 50%.
You'll need a USB "data" cable.The one came with your phone is the best. Some third party cables have only power lines connected in and they will not work. So, make sure you have the "data" cable.
1. First, we have to install the necessary drivers(I am assuming that you're using a Windows PC) .
Here are the drivers. Download, install and give your PC a restart.
2. Download LG flash tool 2014 from here and extract it to your root directory(For example, drive "C " in your PC )
3. Download the firmware file for your specific phone model. In your case, as you have mentioned, it is LG D325. This is a link to a matching firmware for LG L70 D325. This file is big and its around 920MB. After download, extract the zip file to the folder where you copied the LG Flash tool 2014.
4. I hope the above mentioned steps were followed correctly and you're ready now. Remove your battery, press the power button for 5-10 seconds and then re insert the battery. press the volume up button and plug the USB cable(The other end has to be plugged in first to PC. Refer to this video if you are unclear.
5. Now launch "LG Flash tool 2014.3.exe" (right click on it and select "run as administrator" for best results).
6. Once the program is open, and click on 1 and select your kdz file which you got from the step 3. Then click either "Normal Flash(2)" of "CSE Flash".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Now another window will appear and click "Start" as in this picture.
wait until the program finishes and once done, you'll get the initial setup screen on your phone with a greeting message.
If you're still unclear, please pass a comment. Happy communicating..
there are too many people have bricked their device. so here is the guide on how to debrick your device.
1. download the factory firmware ,uncompresss to your local disk. links : http://pan.baidu.com/s/1bC1tJw ; direct link from my server: https://tenfar.com/usr/uploads/nexus6p_fix_bricked.zip .use baidu disk .if you can. bandwidth limited.
2. download the EDL mode drivers ,and install to your pc. links: https://pan.baidu.com/s/1bpHPXE3
3. download miflash http://api.bbs.miui.com/url/MiFlash and install in your pc
4. run the miflash program and select the firmware ,plug in your phone to usb cable. in pc's device manager it will show the 9008 com port.
5.in miflash will show the com port,click flash,wait for it to finished
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edited:
How to enter EDL mode:
1 your device is bricked ,stuck in edl mode.try reset your device before flashing with miflash
2 flash a customize boot from cyanogemod or lineage.
Code:
adb reboot edl
3 unlocked phone with fastboot commands ,try this https://forum.xda-developers.com/ne...l-bootloader-extra-commands-nexus-6p-t3564086
4 unlocked phone using fastboot commands to erase sbl1
Code:
fastboot erase sbl1
not recommended
5 erase your sbl1 with dd commoand not recommended
Code:
dd if=/dev/zero of=/dev/block/platform/soc.0/f9824900.sdhci/by-name/sbl1 bs=16384
can you upload to androidfilehost links, not able to download from there.
also is that a normal firmware or special one?
Same here, first link is not working. Is it the standarg Google Factory Image or is it something different?
The Bootloader must be unloked?
I see the following under Device Manager when I connect my Nexus 6P to a Windows 10 Desktop via USB C:
Qualcomm HS-USB QDLoader 9008 (COM3)
I have installed the Mi Flash Tool as above along with USB drivers and Qualcomm drivers. I am not able to flash any factory firmware, however. I receive an error stating that the "hello packet" could not be received followed my an object reference error. I have tried many versions of the Mi Flash Tool to no avail.
Any other suggestions are much appreciated.
Thanks.
catalase said:
I see the following under Device Manager when I connect my Nexus 6P to a Windows 10 Desktop via USB C:
Qualcomm HS-USB QDLoader 9008 (COM3)
I have installed the Mi Flash Tool as above along with USB drivers and Qualcomm drivers. I am not able to flash any factory firmware, however. I receive an error stating that the "hello packet" could not be received followed my an object reference error. I have tried many versions of the Mi Flash Tool to no avail.
Any other suggestions are much appreciated.
Thanks.
Click to expand...
Click to collapse
power off your device with pressed the power key for 30 seconds. if the EDL mode is not in the right state .it will said send hello packet errors.
this firmware is flashed with qcom's firehose protocol. it needs the device in the right firehose state.
@tenfar Can u update to the another host so we can easily download? That's will be great.
@tjchuot287 you can download "nexus6p_fix_bricked" firmware using "Advanced Download Manager" ADM on PlayStore using its built-in browser with "desktop mode" enabled...
Worked for me...
Hope that helps...
@5.1 I mean that i cannot download "USBdriver_8916.zip", but i think i will find it on google and download it instead. Hope it works.
@tjchuot287
I used advanced download manager and both downloaded fine... Since then far already shared the firmware from his server, It's likely he'll provide an alternative link for the driver as well... :good:
@5.1 does it unbricked your phone? Im kind of desperate
Well, I didn't use it... Since my phone is working. :angel:
I guess tenfar wouldn't have posted it if it didn't work. :good:
anyway, how to enter to EDL mode?
tenfar said:
power off your device with pressed the power key for 30 seconds. if the EDL mode is not in the right state .it will said send hello packet errors.
this firmware is flashed with qcom's firehose protocol. it needs the device in the right firehose state.
Click to expand...
Click to collapse
I press the power key for 30 seconds with the USB C cable attached to the computer and the computer does emit a tone as if the phone has been disconnected and the device manager continues to show the Qualcomm HS-USB QDLoader 9008 (COM3). However, I still receive read packet error.
Do you have any other suggestions on how to get it into the correct EDL mode or the correct firehose state?
UPDATE:
[0.00 COM3]:[COM3]:start flash.
[0.00 COM3]:received hello packet
[0.00 COM3]:can not found programmer file.
Hello packet is recevied. However "can not found programmer file" is returned. Programmer file prog_emmc_firehose.mbn is in the extracted contents nexus6p_fix_bricked.zip, however the Mi Flash Tool does not recognize.
tjchuot287 said:
anyway, how to enter to EDL mode?
Click to expand...
Click to collapse
A few posts above yours...:
tenfar said:
power off your device with pressed the power key for 30 seconds. if the EDL mode is not in the right state .it will said send hello packet errors.
this firmware is flashed with qcom's firehose protocol. it needs the device in the right firehose state.
Click to expand...
Click to collapse
@5.1 thank you, I really appreciate your helps, but i think my phone is dead now. I didnt unlock bootloader before so now i cant do anything. Poor me
I'm having the same "cannot receive hello packet" error. I tried to old down the power until the device is re detected in device manager, but it still does the same.
catalase said:
I press the power key for 30 seconds with the USB C cable attached to the computer and the computer does emit a tone as if the phone has been disconnected and the device manager continues to show the Qualcomm HS-USB QDLoader 9008 (COM3). However, I still receive read packet error.
Do you have any other suggestions on how to get it into the correct EDL mode or the correct firehose state?
UPDATE:
[0.00 COM3]:[COM3]:start flash.
[0.00 COM3]:received hello packet
[0.00 COM3]:can not found programmer file.
Hello packet is recevied. However "can not found programmer file" is returned. Programmer file prog_emmc_firehose.mbn is in the extracted contents nexus6p_fix_bricked.zip, however the Mi Flash Tool does not recognize.
Click to expand...
Click to collapse
select the file in advance settings in miflash
从我的 iPhone 发送，使用 Tapatalk
tjchuot287 said:
@5.1 thank you, I really appreciate your helps, but i think my phone is dead now. I didnt unlock bootloader before so now i cant do anything. Poor me
Click to expand...
Click to collapse
I'm not sure this procedure require an unlocked bootloader. However @tenfar may certainly shed some light on this matter...
Hoping you get it sorted though...
Still getting "cannot receive hello packet" error. @tenfar a couple of questions:
- If the phone is detected in Device Manager as "Qualcomm HS-USB QDLoader 9008 (COMx)" do I still need to install the drivers from step 2?
- Do I need a particular combination of power, vol +/- in order to put the phone in the right EDL mode?
When I hold the power button for few seconds, the PC it is connected to makes the standard tone when a USB device is plugged/unplugged, but device manager still show the same device and Miflash still gives me the error when I flash.
Thanks for all the help BTW
Ever wanted to unbrick your device or switch to stock ROM from a custom ROM without using MSM Unbrick tool and keeping your bootloader unlocked after that well fastboot ROMs are here to help you . I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
1). Download the zip
2). Unpack the zip in a folder
3). Reboot the OnePlus 9R in fastboot-bootloader mode (Power and volume + and volume-)
4). Connect the OnePlus 9R to PC
5). Run flash-all.bat flasher
6). Wait until the process end
7). Voila! your OnePlus 9R will now boot into OxygenOS
POINTS TO REMEMBER
* "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
* These ROMs can't be used to update or downgrade your phone but just to restore your phone. Downgrade from OOS 12 works now.
* This can’t be used to switch from ColorOS to OxygenOS you can use MSM unbrick tool to do that.
DOWNLOAD:-
https://sourceforge.net/projects/op8t-9r-fastboot-roms/files/OnePlus_9R/
Nice
Hi OP, I changed the tag from Development to How To Guide, because we only use Development for original work like you build the ROM from kernel/device tree etc... Thanks.
HELLBOY017 said:
Ever wanted to unbrick your device or switch to stock ROM from a custom ROM without using MSM Unbrick tool and keeping your bootloader unlocked after that well fastboot ROMs are here to help you . I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
1). Download the zip
2). Unpack the zip in a folder
3). Reboot the OnePlus 9R in fastboot-bootloader mode (Power and volume + and volume-)
4). Connect the OnePlus 9R to PC
5). Run flash-all.bat flasher
6). Wait until the process end
7). Voila! your OnePlus 9R will now boot into OxygenOS
POINTS TO REMEMBER
* "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
* These ROMs can't be used to update or downgrade your phone but just to restore your phone.
* This can’t be used to switch from ColorOS to OxygenOS you can use MSM unbrick tool to do that.
* !!! IMPORTANT !!!
Before flashing make sure you know about which type of ram your device supports i.e LPDDR4X/LPDDR5 as flashing wrong xbl config will hardbrick your device.
Here’s how you can check what type of ram your device has:-
Now, as to exactly find out which variant that you have, turn on USB debugging and enter this command:-
Code:
adb shell getprop ro.boot.ddr_type
If the value is 0, that means you have LPDDR4X. If the value is 1, that means you have LPDDR5.
This command is more reliable than the Devcheck and other apps.
DOWNLOAD:- https://drive.google.com/file/d/1LTknGhfR2JTtXhN0rGMCS4OwmUdqt3PF/view?usp=sharing
Click to expand...
Click to collapse
Errr sorry I can make sure that I have the DDR5,but it seems that when I complete the flash using the DDR5 profile config,my phone hard bricked, so how can I get it back? Now it can not even enter 9008 mode
zwk22160 said:
Errr sorry I can make sure that I have the DDR5,but it seems that when I complete the flash using the DDR5 profile config,my phone hard bricked, so how can I get it back? Now it can not even enter 9008 mode
Click to expand...
Click to collapse
You will most likely need to visit the service center and get your phone repaired.
Are you sure that your device had DDR5?
theincognito said:
You will most likely need to visit the service center and get your phone repaired.
Are you sure that your device had DDR5?
Click to expand...
Click to collapse
Actually，I checked my DDR type via devcheck instead of the adb command. Seems that the dev check is no so reliable. Anyway, I have already sent my phone to the service center to repair, I have a OnePlus 7 pro as the backup phone, so it doesn't affect me too much.
Created a Tutorial based on your firmware/instructions. Hoping you will like it.
https://androidmtk.com/install-firmware-oneplus-9r
zwk22160 said:
Actually，I checked my DDR type via devcheck instead of the adb command. Seems that the dev check is no so reliable. Anyway, I have already sent my phone to the service center to repair, I have a OnePlus 7 pro as the backup phone, so it doesn't affect me too much.
Click to expand...
Click to collapse
Yeah. The apps aren't reliable at this. Always use the adb command. 100% reliable. And since it's harbricked for you, I am pretty sure that you have a DDR4X variant.
zwk22160 said:
Errr sorry I can make sure that I have the DDR5,but it seems that when I complete the flash using the DDR5 profile config,my phone hard bricked, so how can I get it back? Now it can not even enter 9008 mode
Click to expand...
Click to collapse
It’s clearly written to not trust devcheck and other apps that prop is the only trusted source of finding which type of ram ur device has. It has also come to my attention that DDR5 devices can boot to EDL if we flash wrong xbl configs on them but the DDR4 ones can’t boot to EDL if wrong xbl config is flashed. (Means ddr4 users would have to get phone repaired by service center if wrong xbl config is flashed on their device)
PetiaWarzel said:
Created a Tutorial based on your firmware/instructions. Hoping you will like it.
https://androidmtk.com/install-firmware-oneplus-9r
Click to expand...
Click to collapse
Appreciate it a lot! Thanks
I faced the same problem
Service center says they can't flash it back
They ended up replaced a new motherboard for me
hmm for me the
Code:
adb shell getprop ro.boot.ddr_type
returns empty.
I guess that infers I'm using LPDDR4X?
Edit:
Code:
adb shell getprop
This would return a complete list of all the properties you can query with this command. For me, this list doesn't seem to have any field called "ro.boot.ddr_type"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using the Chinese variant of OP9R, not so sure if it matters.
Also, DevCheck would not report RAM variants under the hardware tab as well.
Leohearts said:
I faced the same problem
Service center says they can't flash it back
They ended up replaced a new motherboard for me
Click to expand...
Click to collapse
I checked it again and
OnePlus9R:/ $ getprop | grep ddr
[ro.boot.ddr_type]: [1]
[vendor.boot.ddr_type]: [1]
OnePlus9R:/ $
I'm sure flashed the ddr5 version, but it hard-bricked and even cant boot into 9008
*UPDATED*
* Added OxygenOS 11.2.6.6 Fastboot ROM
* Removed xbl configs so that now no more hardbricks happen
* Reduced partition sizes for inactive slot so that ROMs can be flashed properly through fastboot
will this work on Chinese variant 12gb/256gb ddr4 ? LE2100 bl is already unlocked
Mkkt Bkkt said:
will this work on Chinese variant 12gb/256gb ddr4 ? LE2100 bl is already unlocked
Click to expand...
Click to collapse
If ur using oxygenos then yes
HELLBOY017 said:
If ur using oxygenos then yes
Click to expand...
Click to collapse
yes , for some reason it came with oxygenos preinstalled
HELLBOY017 said:
Ever wanted to unbrick your device or switch to stock ROM from a custom ROM without using MSM Unbrick tool and keeping your bootloader unlocked after that well fastboot ROMs are here to help you . I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
1). Download the zip
2). Unpack the zip in a folder
3). Reboot the OnePlus 9R in fastboot-bootloader mode (Power and volume + and volume-)
4). Connect the OnePlus 9R to PC
5). Run flash-all.bat flasher
6). Wait until the process end
7). Voila! your OnePlus 9R will now boot into OxygenOS
POINTS TO REMEMBER
* "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
* These ROMs can't be used to update or downgrade your phone but just to restore your phone.
* This can’t be used to switch from ColorOS to OxygenOS you can use MSM unbrick tool to do that.
DOWNLOAD:-
https://mega.nz/folder/ePIETB4D#sU8cJ54l4UI7JCXGwc7Nog
Click to expand...
Click to collapse
Download link in Mega can't download with standard account, requires premium. could you please upload in other hosting website if possible? Thanks!
logeshwywan said:
Download link in Mega can't download with standard account, requires premium. could you please upload in other hosting website if possible? Thanks!
Click to expand...
Click to collapse
Will do
Link updated.
*Apologies for updating it late as I had fever so didn't have time for mirror it somewhere else
With this tool, a user can write IMEI to a Qualcomm device and restore NULL IMEI or fix corrupted IMEI on Qualcomm Snapdragon devices. you must follow the steps listed below to prepare your device for the Qualcomm IMEI repair process.
Preparation :
Enable USB Debugging on your device from Developer Options. [[ If Developer Options are missing from your Android phone settings, then go to Settings > About Phone and tap on Build Number for 7-10 times ]].
Some devices need an unlocked bootloader. If it is not unlocked, then unlock the bootloader on your device from here.
Need proper Root permissions. (with Magisk ).
download and setup SDK Platform Tools on PC. ( Download SDK Platform Tools For windows ).
Qualcomm_Smartphone_Write_IMEI_Tool_v1.01.
Steps to Repair IMEI of Snapdragon Device
1- Download and extract qualcomm driver.zip .
2- install Qualcomm COM Port Driver manually.
Open the Device Manager :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2-2 Right-click on PC-NAME and Add drivers :
2-3 Select Browse my computer for driver software -> Let me pick from a list of device drivers on my computer and install Qualcomm COM Port Driver manually.
3- Extract SDK Platform Tools and copy to C:/ .
4- Connect your device to PC using USB Cable.
5- Open command window ( Run as administrator ).
5-1 Now in CMD type the below commands :
cd C:/(SDK Platform Tools location)
Click to expand...
Click to collapse
adb devices
Click to expand...
Click to collapse
adb shell
Click to expand...
Click to collapse
su
Click to expand...
Click to collapse
setprop sys.usb.config diag,adb
Click to expand...
Click to collapse
***** It will open DIAG COM Port or enable DIAG Port.
6- Download and extract Qualcomm_Smartphone_Write_IMEI_Tool_v1.01.zip on your PC.
7- Run Qualcomm_Smartphone_Write_IMEI.exe (Qualcomm IMEI Changer) as administrator.
8- Open settings ( PASSWORD : ustest ).
9- Select Write IMEI1 ( If you have dual SIM device then also select Write IMEI2 ) and click on OK .
10- Enter the IMEI number in the space provided and select COM Port ( COM port : USB ) and then Click on the Write1 Button to begin the Writing Process.
11- You should see the PASS message after a second or two.
12- Now, Reboot your device and check the IMEI by dialing *#06#.
we are done repairing IMEI on Snapdragon powered devices.
I am gettinf read SN fail error on Pixel 5, any reason?
hhkx said:
I am gettinf read SN fail error on Pixel 5, any reason?
View attachment 5621621
Click to expand...
Click to collapse
Hello
I think you are not doing well from 5-1 onwards.
because No connection was established between the phone and the application.
I don't think it is a connection problem because before using pixel 5 diag mode codes below it was giving "connection timeout error".
After applying those, it says SN fail. I also see qualcom com connections in ports in Windows device manager
adb shell
su
resetprop ro.bootmode usbradio
resetprop ro.build.type userdebug
setprop sys.usb.config diag,diag_mdm,adb
diag_mdlog
hhkx said:
I don't think it is a connection problem because before using pixel 5 diag mode codes below it was giving "connection timeout error".
After applying those, it says SN fail. I also see qualcom com connections in ports in Windows device manager
adb shell
su
resetprop ro.bootmode usbradio
resetprop ro.build.type userdebug
setprop sys.usb.config diag,diag_mdm,adb
diag_mdlog
Click to expand...
Click to collapse
Hello
This error occurs when there is no connection between the phone and the application.
Please follow the steps carefully and make sure the driver is fully installed on the computer.
Hi. Is it useful for snapdragon 855 devices? Especially lg v50?
Schirip said:
Hi. Is it useful for snapdragon 855 devices? Especially lg v50?
Click to expand...
Click to collapse
Hi, I also had the same question. specifically for Sony Xperia 5 having SD 855.
it does not work as mentioned. I have had a million tries with it.
Qualcomm drivers installed.
Phone detected in Qcom Diag Mode
Tried using Fastboot
Using EDL
Using ADB
Using every other method listed on the internet.
Still says ( Connecting to the device and failed at the end.)
any suggestions?
P.S thank you for your work.
Hello,
Tried to repair IMEI on One plus 10 pro ( sm8450) and it doesn't worked saddly. Said it was changed, rebooted the phone but the old IMEI were still there.
Looking for a reliable way to repair One Plus 10 pro IMEI
Nixeus2 said:
Tried to repair IMEI on One plus 10 pro ( sm8450) and it doesn't worked saddly. Said it was changed, rebooted the phone but the old IMEI were still there.
Click to expand...
Click to collapse
Same for Sony Xperia XZ1 Compact. This app is outated.
If the IMEI is changed, will the phone (Pixel 4XL specifically) continue to receive updates? If yes, then would it be safe to download and install those updates?
<Moderator Note>: "Repairing" an IMEI; i.e. restoring a device's original IMEI is legal. Changing your IMEI from the device's original IMEI is illegal in many countries, and is not allowed on XDA. I've removed the word "Change" from the thread title and one place in the OP.
Rule 9 of XDA Developers Forum Rules :
9. Don't get us into trouble.
Don't post copyrighted materials or do other things which will obviously lead to legal trouble. If you wouldn't do it on your own homepage, you probably shouldn't do it here either. This does not mean that we agree with everything that the software piracy lobby try to impose on us. It simply means that you cannot break any laws here, since we'll end up dealing with the legal hassle caused by you. Please use common sense: respect the forum, its users and those that write great code.
Click to expand...
Click to collapse
how to repair the certificate of a si g950u? it says final imel cert fail
Who has done this successfully?
bikeet said:
Who has done this successfully?
Click to expand...
Click to collapse
Not me
Tested on Xiaomi M9T Pro (because my mobile operator activated some features only on specifc phones so I wish to fake another brand/model)
It always displays "FAIL". :-(
Hi, and thanks for the tutorial, it is possible to work on S20FE (qualcomm 865 - sm8250) ?
Thanks, i will wait for your answer !
Doesn't work on my Samsung S20+ 5G, the DIAG Port is enabled (showed on device manager on COM7) but the app fails to detect connection to my phone. is there any way to repair the IMEI on snapdragon device? I messed up mine bad.
Has anyone tried it to repair imei on Asus Zenfone 8 Flip?
text1 said:
Hello
This error occurs when there is no connection between the phone and the application.
Please follow the steps carefully and make sure the driver is fully installed on the computer.
Click to expand...
Click to collapse
Doesn't work for snapdragon 888, driver is fully installed, even qpst detect it, does the backup but they put an anti-tampering script, i think.
I am perfom this Sorry for my english, I am from Ukraine
Download archive!
We unpack. Install the adb and mtk preloader drivers, if they are not installed, restart the computer.
In the smart, turn on the developers menu, in it - "Allow OEM unlock" and "USB debugging" and connect the smart to the computer.
We drop valuable photo data from the smart to the computer for any, and, without disconnecting the smart from the PC, run the script (with the phone connected to the PC and loaded into the android phone. Reboot_to_fastboot_getvar current-slot.bat (not from the admin, just click twice).
Smart will look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
we allow - put a daw, ok. We are waiting for the smart to reboot into fastboot, when the barcode appears on the smart screen, before that we do not press anything in the script
I did the scripts step by step, after each operation in the script window, press enter to continue, and so on until each script is closed
We look at our current slot in the window and remember the letter - a or b:
In the script, press enter so that the smart reboots and the script closes.
Run flash_tool.exe, go to this tab and check the boxes, as in the screenshot:
So we consider the necessary versions of orig. files, so as not to download and sew a specific firmware version for this instruction.
(And best of all, all the checkboxes, except for system, vendor, userdata - they are not critical, if they are not removed, it will take up a lot of space on the computer up to +74 gb, but I did not put these checkboxes, there must be some risk and passion )
We press "Read Back" and only then we connect the switched off smart to the PC, we wait, at the end we disconnect the bodies, do not touch it: sveta:
Go to this tab, remove all checkboxes! And we only put on lk_ with the letter of a non-your slot that we looked at, for example, you had slot "a" - so we put a check on lk_b and vice versa :
Click "Download" and connect the switched off smart to the PC (it was already turned off: sveta
As it flashes, we close the USB flash drive window, disconnect and turn on the smart, after loading, we connect it to the PC again, we already run the script
Unlock_Moto_E6S.bat, wait until the body reboots into a fastboot (to the barcode on the screen) and only then press the input step by step to continue in the script until it is completely closed.
Everything, the bodies are unlocked. Now you can get an excellent and fast root from Magisk, try other firmware, unsubscribe which one is buggy, which one flies. I haven't tried yet. Now I will write how to flash orig. kernel with magisk root (attached magisk boot for xt2053-1 4/64 fw RETEU 288-60-6-29 https://mirrors.lolinet.com/firmware/moto/fiji/official/RETEU/
Additionally, there is a script in the folder to delete the message when loading that the bootloader is unlocked, it does not interfere much, but I deleted it. Since this is not important, I separated it from the main script, since I did not test it on different versions of the firmware, in theory it should work on all versions, you can try after unlock. Or throw off ROM_45 from your firmware, I'll remove it from it. I now have the latest firmware flashed, it is on the server, but for some reason it did not fly through the air. If you flash it, then you can safely delete the message from the bootloader with my script, there is a file from it)
I am flash in slot_b Android 12 GSI, work. And i have in slot_a original system
severagent007 said:
I am flash in slot_b Android 12 GSI, work. And i have in slot_a original system
Click to expand...
Click to collapse
dude!! followed all your steps and i now have a bootloader unlocked and rooted device. how did you figure out the lk and signature to unlock that??
proof attached below
Слава Украине!!!
can the mods move this to the moto e6s forum so we can spread the news?
luridphantom said:
can the mods move this to the moto e6s forum so we can spread the news?
Click to expand...
Click to collapse
I took the first firmware I got to try from here: https://4pda.to/forum/index.php?showtopic=892755
but the firmware itself is everywhere, for example here:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
DeveloperLuke Roms - Browse /GSIs at SourceForge.net
sourceforge.net
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
You can try to sew any GSI arm64 a/b from anywhere you find and choose the one you like, because smart supports Project Treble.
If you like one and will look cool and work firmware, post links here!
Tested it and it worked! Thanks a lot!
Now looking for delevoping some roms to this device
Im having a little problem, i tried to flash a GSI with "fastboot -u flash system gsi.img", the device didn't boot. Then i tried to flash the stock with the SP Flash Tool, and i throws an error (status_sec_dl_ forbidden), then i flashed it with Lenovo Rescue and Smart Assistant. I tried to flash via fastboot the patched magisk image but it throws an signature error.
Any help? Tha device still says that is unlocked
refrigerador67 said:
Im having a little problem, i tried to flash a GSI with "fastboot -u flash system gsi.img", the device didn't boot. Then i tried to flash the stock with the SP Flash Tool, and i throws an error (status_sec_dl_ forbidden), then i flashed it with Lenovo Rescue and Smart Assistant. I tried to flash via fastboot the patched magisk image but it throws an signature error.
Any help? Tha device still says that is unlocked
Click to expand...
Click to collapse
did you use the auth file that comes with sp flash tool? without that your device wont boot properly
Yes, i used the correct download agent and auth file
interesting, i followed all his steps and had no problem rooting it. try backtracking with his scripts again?
Solved it, also me and a developer are working on a new, more simple and automated script. Still haven't figured out how to flash the lk via script.
When is done i will post a complete guide in the moto e6s forums on how to do it, i think it might work well, but i would have to test in a non-unlocked device
Can someone please make a video with explanation, I didn't understand very well what is done, so I won't touch anything, but I thank those who record a video explaining it to me (I'm Brazilian)
Here you have a more straight forward guide, note that is still in testing
[GUIDE] How to unlock bootloader on E6s
Hello, in this guide i will show you how to unlock the bootloader on Moto E6s ;) (Sadly for now this guide is Windows only) CAUTION You are doing this AT YOUR OWN RISK! I will NOT take responsibility if you brick your device! Also, remember to...
forum.xda-developers.com
Excuse my ignorance, do you think it is compatible for the XT2053-5 model?
cannot use fastboot flash boot magiskboot.img
sign failed
partition flash is not allowed
hey is the moto e6+ twrp work on e6s