Hello! I've posted this due to no one having any compatibility with TCL, I'm attempting to root my device.
Device Info: TCL 30T (Android 12, Model T603DL)
This is what I've attempted so far:
1: Enabled all settings for the preparation (Enabled Developer Mode and enabled USB Debugging and OEM Unlocking)
2: Tried KingoRoot (failed at 90%, no compatibility)
3: (On Pc) Tried ADB, installed it directly from Android (the Platform-Tools), and the device was found when typing (ADB Devices) through CMD
4: Tried to do a flash-boot but failed, I've also looked into Device Manager and it registers (TCL 30 T) as a "Portable Device", not sure if that's an issue
5: Tried some other one-touch rootings and failed, when trying to even do a flash it would say "command unknown" or "waiting for devices" and be on an infinite wait
I'm fairly new to android, though I've spent days on this. I'd love some guidance if you can, I can't find any tutorial for my device anywhere. Thank you!
Is your BL unlocked?
Arealhooman said:
Is your BL unlocked?
Click to expand...
Click to collapse
I don't believe it is, I don't know the abbreviation "BL". But I doubt I have it unlocked
LocalGrandpa020290293 said:
I don't believe it is, I don't know the abbreviation "BL". But I doubt I have it unlocked
Click to expand...
Click to collapse
Bootloader
Arealhooman said:
Bootloader
Click to expand...
Click to collapse
Yea I don't think I do, even so where can I get it unlocked/what do I download to unlock it? (Links to sites that can help are good or downloads too)
LocalGrandpa020290293 said:
Yea I don't think I do, even so where can I get it unlocked/what do I download to unlock it? (Links to sites that can help are good or downloads too)
Click to expand...
Click to collapse
I can’t find any guides for your device, but here si a general guide that works for most devices: https://www.droidwin.com/unlock-bootloader-android-device/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the issue, once it's rebooting I run the fastboot flashing unlock, and it says waiting for device, after such nothing happens (never finds it), and then the device just boots up normally, nothing special. What do you think is the issue?
LocalGrandpa020290293 said:
View attachment 5785985
This is the issue, once it's rebooting I run the fastboot flashing unlock, and it says waiting for device, after such nothing happens (never finds it), and then the device just boots up normally, nothing special. What do you think is the issue?
Click to expand...
Click to collapse
do you have Adb debugging enabled? Is your device on? Run “fastboot devices”
Arealhooman said:
do you have Adb debugging enabled? Is your device on? Run “fastboot devices”
Click to expand...
Click to collapse
I don't have that setting, I did see "Wireless Debugging" (had something to do with ADB's), so I enabled it, and retried all the steps, still nothing. What is to note is that when running the command 'fastboot devices', it returns an empty line in the console and thats it.
EDIT: Yes my device is on when attemping this, I believe that fastboot can't find my device
Double check? It should be a bit under wireles. You need it to operate form the BL
Arealhooman said:
Double check? It should be a bit under wireles. You need it to operate form the BL
Click to expand...
Click to collapse
Not sure I get the last part. I turn on my phone and enabled all that needed to be enabled. I then plug my phone to my PC via charger/USB. Then I run the command prompt and you saw the picture (phone already backed up). Wdym under wireless?
On the list
Unless you are booted, wireless doesnt work
Arealhooman said:
Double check? It should be a bit under wireles. You need it to operate form the BL
Click to expand...
Click to collapse
Do you have discord or something for instantaneous messaging? I can provide a live video too and upload to YouTube real quick
Arealhooman said:
Unless you are booted, wireless doesnt work
Click to expand...
Click to collapse
Booted as in the phone on and loaded (past lock screen), right? And no in device manager its labeled under Portable Devices
LocalGrandpa020290293 said:
Booted as in the phone on and loaded (past lock screen), right? And no in device manager its labeled under Portable Devices
Click to expand...
Click to collapse
It always does
just you need wired
LocalGrandpa020290293 said:
Do you have discord or something for instantaneous messaging? I can provide a live video too and upload to YouTube real quick
Click to expand...
Click to collapse
Arandomhooman#0001
Arealhooman said:
Arandomhooman#0001
Click to expand...
Click to collapse
Sent a request, should be named Blef or something
LocalGrandpa020290293 said:
Sent a request, should be named Blef or something
Click to expand...
Click to collapse
Hey, won’t be able to talk or accept the request now, but will later today kr tomorrow.
Related
OK, so i am really lost at this point. I have been trying for the past couple of days with no luck.
I used Minimal adb and fastboot, downloaded Lg drivers (LGMobileDriver_WHQL_Ver_4.0.3), sdk google drivers and looked at many comments to figure this out.
i type adb device and my phone shows, I type fastboot device and last couple of my phone shows. I used Mininimal adb and fasboot to unclock the the bootloader and i followed all the commands but when i get to fastboot flash recovery twrpxxxx.img, it tells me cannot load twrpxxxx.img. Also, when i type in adb reboot bootloader in brings me the an LG screen with powered by android at the bottom instead of the correct screen.
So, i tried the other way. Power phone off, hold down the volume down button and plug in usb and bootloader/fastboot opens up ( the screen with the line in the top left, with a blank page). it shows unlocked, few lines in white, and then few lines in red. I type fasboot devices and my phone shows up displaying last couple of the phone sn#. but when i go to type fasboot flash recovery twrpxxxx.img, i get the same message cannot load twrpxxxx.img. and on the phone is shows fastboot getvar partition recovery.
Any idea on what this is and how can i solve this?
Thanks in advance.
Rename it to recovery.img and try again.
I renamed it and I still get the same error. Cannot load recovery.img
papatoon3 said:
I renamed it and I still get the same error. Cannot load recovery.img
Click to expand...
Click to collapse
Make sure the image is in the same folder that you are running adb from; it doesnt scan your whole computer for the file. ��
Elu_sama said:
Make sure the image is in the same folder that you are running adb from; it doesnt scan your whole computer for the file. ��
Click to expand...
Click to collapse
It is in the same folder.
Does it make any difference that my phone is unlocked from T-Mobile via unlocked code? That should not have anything to do with it thought. I am just tying to figure it out.
Figured it out.
papatoon3 said:
I renamed it and I still get the same error. Cannot load recovery.img
Click to expand...
Click to collapse
I suggest you remove and reinstall sdk or install nexus root tools and run a cmd within the updated tools. Make sure you installed the right drivers, delete all others, reinstall, although your error seems more a problem with the tools, permissions perhaps, did you run cmd as admin?
Unable to load tells me it can't find your file.. Perhaps it has a hidden extension? Recovery.img.txt
Whats the complete exact command you're typing?
"fastboot flash recovery recovery.img"
http://androiding.how/how-to-install-twrp-recovery-via-fastboot/
Sounds like this is not enabled
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-H901 using Tapatalk
papatoon3 said:
Does it make any difference that my phone is unlocked from T-Mobile via unlocked code? That should not have anything to do with it thought. I am just tying to figure it out.
Click to expand...
Click to collapse
SIM unlocked (tmo has no code, its an app) and bootloader unlocked isnt the same thing.
Never mind got it
papatoon3 said:
Figured it out.
Click to expand...
Click to collapse
What was the solution i need it please and thanks
tanked89 said:
Never mind got it
What was the solution i need it please and thanks
Click to expand...
Click to collapse
When your phone is turned on and plugged in, type command adb devices, Does it show?
Put phone in fastboot mode, type command fastboot devices, does it show?
I figured it out. I had to install motorola and g4 drivers to get fast boot to read when I only had one or the other it was only reading adb when I had both on pc it read and adb & fastboot and worked. Thank you.
Hi sir I am facing a problem I rooted my v10 first I unlocked bootloader and then I rooted it by using fwul I hard reset it but when I turned it on a twrp recovery menu appeared please help that how it fix
Hi, all!
My phone died at the morning after using Bluetooth at the public. Is there a possibility to recover it with a data? LTE version.
Thanks in advance,
Mateusz
Does it turn on at all?
Does it bootloop?
boot-loop
Vagelis1608 said:
Does it turn on at all?
Does it bootloop?
Click to expand...
Click to collapse
Yes, it is a boot-loop. PC doesn't see it.
@admin pls change my subject:]
matiz1999 said:
Yes, it is a boot-loop. PC doesn't see it.
@admin pls change my subject:]
Click to expand...
Click to collapse
I take it you don't have root?
And the bootloader is locked?
Some year ago I have it rooted but I get back to standard software
matiz1999 said:
Some year ago I have it rooted but I get back to standard software
Click to expand...
Click to collapse
Since you want to keep your data, try to get into download mode and flash a kdz.
If that doesn't work, I'm afraid you are gonna have to do a "hard reset" (factory reset/data wipe).
May you provide me with a good tutorial for doing it?
Here is one: https://forum.xda-developers.com/showthread.php?t=2797190
If it doesn't work, just use Google to find another one.
I will tell you about the hard reset, if you want.
I am problematic - and some alternative because I cannot install stuff on this PC - some portable version of LG drivers? I cannot find
matiz1999 said:
I am problematic - and some alternative because I cannot install stuff on this PC - some portable version of LG drivers? I cannot find
Click to expand...
Click to collapse
Nope.
Get an admin to install it.
No way around it.
Unless you want to try the hard reset, which doesn't need a PC.
But you will lose all your data.
Sic! But on the downloaded mode, it's writing unrooted user b13>?
Sic! But in downloaded mode there's info that it is unrooted user b13>?
matiz1999 said:
Sic! But in downloaded mode there's info that it is unrooted user b13>?
Click to expand...
Click to collapse
Even better!
That is meant for LG's engineers to see if your phone is rooted when you sent it in for a fix under the warranty.
If it says rooted, they will mark warranty void and won't fix it, unless you pay them.
Anyway, it let's you flash no matter what it says there.
So go ahead and flash the kdz.
Okay, cool for me.
I already started it but
1st I am not sure which version I have, can I check it somewhere
2nd the tool shows that my phone is disconnected
matiz1999 said:
Okay, cool for me.
I already started it but
1st I am not sure which version I have, can I check it somewhere
2nd the tool shows that my phone is disconnected
Click to expand...
Click to collapse
There is a sticker behind the battery.
Vagelis1608 said:
There is a sticker behind the battery.
Click to expand...
Click to collapse
die
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://ibb.co/c0kwrk https://ibb.co/c0kwrk
"do you wish to cancel s/w update"
"phone is disconnected from the PC"
I tried already 3 more tutorials
matiz1999 said:
die https://ibb.co/c0kwrkhttps://ibb.co/c0kwrkhttps://ibb.co/c0kwrkhttps://ibb.co/c0kwrk
"do you wish to cancel s/w update"
"phone is disconnected from the PC"
I tried already 3 more tutorials
Click to expand...
Click to collapse
Make sure that the cable is good.
The older it is, the more likely it is to cause issues during data transfers.
My suggestion?
Get a new one.
Or, you could borrow one from a friend, but make sure it works on data transfers, not just charging.
I made 2 kdz flashes but the phone still bricks. Rescue data, but all in all install Lineageos- CM RIP. Thank you!
PS: Subject to close:]
Hi guys,
I was following tutorial in order to install stock international FW on my Amazfit 2. However something has failed at step 11, when I was trying to "adb shell reboot bootloader". I got
- exec '/system/bin/sh' failed: Not a directory (20) -
using port=5555
Click to expand...
Click to collapse
Watches are now stuck at amazfit logo and I cannot seem to get to fastboot. Does anybody knows, how to get to fastboot via some key combo on Amazfit 2? I could find just Amazfit solution (this "4 seconds" hint), however it does not seem to work for Amazfit 2...
Any help appreciated, thanks!
Try just this instead:
Code:
adb reboot bootloader
or
Code:
adb reboot-bootloader
Hi thanks for the help,
However I got this idea as well before (based on my general android devices experience) however what it does is that it just reboots normally leading to splash screen stuck. It does not matter whether I issue adb reboot bootloader, adb reboot-bootloader or adb reboot lalala. I think it just grasps adb reboot part only and does normal reboot. However, thank you!.
lfom said:
Try just this instead:
Code:
adb reboot bootloader
or
Code:
adb reboot-bootloader
Click to expand...
Click to collapse
Well, if your watch gets into a bootloop after you use reboot, then something else is wrong... Normal reboot works, just "reboot bootloader" fails?
No, unfortunatelly both normal reboot and reboot bootloader lead to bootloop with Amazfit logo :/
Fastboot finds your device? Can you wipe both data and cache?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only adb devices sees it. But as I cannot get to bootloader, fastboot does not see it, so I cannot do anything...
Have you ever tried to flash another ROM? It seems that system is broken, that's why you get bootloops and cannot get to bootloader. You have to find a way to do it manually, most devices has some combination at start up to activate recovery and/or fastboot...
Make sure fastboot drivers are installed:
https://forum.xda-developers.com/showthread.php?t=2588979
Then check this for manually activate fastboot:
https://forum.xda-developers.com/sm...tches/amazfit-boot-fastboot-directly-t3546829
Hi Ifom, thanks again for your energy and willingness to help me.
I would like to flash another ROM, however right for that I would need to get to bootloader. Guide in second link does not work, probably it is intended just for Amazfit 1. This is actually my original question, whether there is something like this for Amazfit 2, because I cannot find it anywhere.
lfom said:
Have you ever tried to flash another ROM? It seems that system is broken, that's why you get bootloops and cannot get to bootloader. You have to find a way to do it manually, most devices has some combination at start up to activate recovery and/or fastboot...
Make sure fastboot drivers are installed:
https://forum.xda-developers.com/showthread.php?t=2588979
Then check this for manually activate fastboot:
https://forum.xda-developers.com/sm...tches/amazfit-boot-fastboot-directly-t3546829
Click to expand...
Click to collapse
Poborak said:
Hi Ifom, thanks again for your energy and willingness to help me.
I would like to flash another ROM, however right for that I would need to get to bootloader. Guide in second link does not work, probably it is intended just for Amazfit 1. This is actually my original question, whether there is something like this for Amazfit 2, because I cannot find it anywhere.
Click to expand...
Click to collapse
Be aware that the method is really hard to get right, it's unlikely you'll get it immediately. It took me maybe 10 minutes of testing to get it to work
You were right! I can confirm now that this method work also for Amazfit 2, however it is kind of tricky. Took me 20 mins to do it right.
Thank you both for helping me out, I appreciate your friendliness very much!
Quinny899 said:
Be aware that the method is really hard to get right, it's unlikely you'll get it immediately. It took me maybe 10 minutes of testing to get it to work
Click to expand...
Click to collapse
Quinny899 said:
Be aware that the method is really hard to get right, it's unlikely you'll get it immediately. It took me maybe 10 minutes of testing to get it to work
Click to expand...
Click to collapse
Take the "Huami_AMAZFIT_Tool_1.0.1.1" and click on "reboot bootloader". This works!
schroepfer said:
Take the "Huami_AMAZFIT_Tool_1.0.1.1" and click on "reboot bootloader". This works!
Click to expand...
Click to collapse
That requires ADB, which requires the watch to at least get to that stage, which isn't the case if you break the kernel
I cannot enter Fastboot Mode.
Quinny899 said:
That requires ADB, which requires the watch to at least get to that stage, which isn't the case if you break the kernel
Click to expand...
Click to collapse
I have an Amazfit and I can't get into Fastboot Mode at all. I have tried all of the alternatives described here many, many times. One question: can Windows / USB port influence not being able to enter Fastboot? Should I try on a Windows 7 for example?
So I just got my phone today and I was trying to root it (with magisk boot patch) but after using the unlock app and enabling USB debugging fastboot still wasn't showing the device.
There was no option in the developer settings for OEM unlock..
I don't know if it is a bug or am I just missing something, is there anyone who can help me ?
Did you connect to wifi or mobile networks?, you need to be online
NisseGurra said:
Did you connect to wifi or mobile networks?, you need to be online
Click to expand...
Click to collapse
Yes of course otherwise the app won't unlock
*Is it ok for there to be no OEM unlcok option in the developers settings ?
danielbr14 said:
Yes of course otherwise the app won't unlock
Click to expand...
Click to collapse
Unlocked, rebooted, full wiped and add network again?
NisseGurra said:
Unlocked, rebooted, full wiped and add network again?
Click to expand...
Click to collapse
Yes, when I boot it clearly states that the bootloader is unlocked yet I don't have the OEM unlock option in the developers settings..
But if the bootloader are unlocked why you need the oem toggle?, Did you try to flash magic?
NisseGurra said:
But if the bootloader are unlocked why you need the oem toggle?, Did you try to flash magic?
Click to expand...
Click to collapse
Because the device still doesn't show up on fastboot (it does on ADB)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you try "fastboot devices"?
windows driver correct?
NisseGurra said:
Did you try "fastboot devices"?
windows driver correct?
Click to expand...
Click to collapse
No I tried to install everything that this guide says to, but the phone still shows up with an incorrect driver
Try the google drivers
Get the Google USB Driver | Android Studio | Android Developers
The Google USB Driver is required to perform adb debugging on Windows with Google devices.
developer.android.com
NisseGurra said:
Try the google drivers
Get the Google USB Driver | Android Studio | Android Developers
The Google USB Driver is required to perform adb debugging on Windows with Google devices.
developer.android.com
Click to expand...
Click to collapse
I tried it but When I point it to the driver it says it can't find a driver for my device
danielbr14 said:
I tried it but When I point it to the driver it says it can't find a driver for my device View attachment 5681607
Click to expand...
Click to collapse
And if you try to install it from device manager?
NisseGurra said:
And if you try to install it from device manager?
Click to expand...
Click to collapse
That's what I did, is there a way to install it without the device manager?
danielbr14 said:
That's what I did, is there a way to install it without the device manager?
Click to expand...
Click to collapse
I would delete all installed drivers for Zenfone 9, reboot, change usb-port and install googles drivers.
But as this more an windows issue its difficult to assist remote
NisseGurra said:
I would delete all installed drivers for Zenfone 9, reboot, change usb-port and install googles drivers.
But as this more an windows issue its difficult to assist remote
Click to expand...
Click to collapse
I already tried it, and to be honest I don't think it is something that I am doing. adb detects the phone is both when it isbooted and when it is in the bootloader. Its only during fastboot that windows shows a missing driver the device...
The OEM Unlock toggle is usually unavailable (grayed out) when the bootloader is unlocked. It's possible this is the reason why it doesn't show up.
As for being unable to issue fastboot commands, it sounds to me like a driver issue, like others have stated.
OK, Finally managed to track down the correct driver thanks to this post and download this driver
FYI for anyone who encounters the same issue just open device manager and right click on your unrecgonized device (needs to be already in fastboot mode) the click update and select the driver from the zip file you just downloaded according to your PC then just finish installing it and everything should work.
danielbr14 said:
View attachment 5681497
No I tried to install everything that this guide says to, but the phone still shows up with an incorrect driver
Click to expand...
Click to collapse
Check windows update then optional update. There will be an Asus ADB driver to install.
danielbr14 said:
OK, Finally managed to track down the correct driver thanks to this post and download this driver
FYI for anyone who encounters the same issue just open device manager and right click on your unrecgonized device (needs to be already in fastboot mode) the click update and select the driver from the zip file you just downloaded according to your PC then just finish installing it and everything should work.
Click to expand...
Click to collapse
Just the answer I was looking for. Thank you for sharing!
Quite counter-intuitive that the trcick is to install Win8 drivers for Win10, but presumably they are the same but should have been downloaded automatically in Win10.
mickey36736 said:
Check windows update then optional update. There will be an Asus ADB driver to install.
Click to expand...
Click to collapse
Hopefully this is an option for most people, but, for the record, this did not work for me.
Windows 10 had a bunch of suggestions there but none of them were from Asus.
Perhaps it's glitched and they are in an invisible overflow - my optional driver section has exactly 10 entries. no more and no less, which I find a little suspicious.
Hello guys can someone help me on my redmi note 10,
So basically my problem is adb can detect my phone when its power on but when my phone switches to fastboot adb cannot detect it anymore. I also try the adb reboot bootloader command, it work and it go to fastboot but after that it didnt detected anymore.
Please help me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not sure, but it looks like you need install usb/device drivers from MiFlash.
And after, try enable/allow usb debugging
missingN said:
I'm not sure, but it looks like you need install usb/device drivers from MiFlash.
And after, try enable/allow usb debugging
Click to expand...
Click to collapse
i already tried that still the same
@ibanezred16 May be you missing add Environment Variables path?
Adb-fastboot PE guide
ibanezred16 said:
...when my phone switches to fastboot adb cannot detect it anymore. ...
Click to expand...
Click to collapse
This is intended behavior, if your phone is in fastboot mode it can only be detected by fastboot (try command 'fastboot devices'). Devices can only be detected by adb in recovery when sideload is enabled or in OS with debugging on.
Mthw said:
This is intended behavior, if your phone is in fastboot mode it can only be detected by fastboot (try command 'fastboot devices'). Devices can only be detected by adb in recovery when sideload is enabled or in OS with debugging on.
Click to expand...
Click to collapse
sorry im new here, can you tell me a way to flash the twrp? because the regular method don't work with me
ibanezred16 said:
sorry im new here, can you tell me a way to flash the twrp? because the regular method don't work with me
Click to expand...
Click to collapse
What do you mean by regular method? This should work: 'fastboot boot twrp.img' and once it boots up go to Advanced and there is an option called 'flash current recovery'.
Mthw said:
What do you mean by regular method? This should work: 'fastboot boot twrp.img' and once it boots up go to Advanced and there is an option called 'flash current recovery'.
Click to expand...
Click to collapse
that's also one of my problem when it boots to twrp the touch screen is not working can't touch or click anything when im in twrp
Are you using this one? https://forum.xda-developers.com/t/recovery-12-official-teamwin-recovery-project.4268563/ Either way you should probably ask there.
Mthw said:
Are you using this one? https://forum.xda-developers.com/t/recovery-12-official-teamwin-recovery-project.4268563/ Either way you should probably ask there.
Click to expand...
Click to collapse
yes, thank you very much for your help
Were you successful? I am guessing you are trying to install a ROM, depending on the rom you could also use a different recovery.
Mthw said:
Were you successful? I am guessing you are trying to install a ROM, depending on the rom you could also use a different recovery.
Click to expand...
Click to collapse
yeah im trying to install Evox
Mthw said:
Were you successful? I am guessing you are trying to install a ROM, depending on the rom you could also use a different recovery.
Click to expand...
Click to collapse
Im succesfully installed twrp I used mouse via otg connector to touch the screen