Related
Hello everyone! I have the phone in hard bricked, I read on the forums that you can solve, not my model (xt1524) but other models. I tried some procedures but has not been able to solve anything. Can someone tell me how to call the files I have to try. I tried with Motoflasher but still not valid for my model. So I would try to look for files that I need but do not know their names. Thank you! I read somewhere that would serve certain files that are called programmer.mbm and singleimage.bin. Can someone tell me exactly what they're called to my phone.? Thank you!
Maybe is usefull :
- http://forum.xda-developers.com/moto-e-2015/general/stock-firmware-images-t3049047
- http://techtrickz.com/how-to/reinstall-stock-firmware-on-2nd-generation-moto-e-2015/
thanks, but the firmware is I, I can not install it because not light! I can only access it via the "Qualcomm HS-USB QDLoader 9008". Reading the various forums say that you need the program Motoflasher and certain files to switch it on and enter Fastboot. The problem is that I do not know which files I need.
anyone knows why I get this error?
**** QBOOT SELECTION STARTED: ****
**** BOOTLOADER FLASHING STARTED: ****
OUTPUT: opening device: \\.\COM9
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: OKAY [ 0.001s]
OUTPUT: identifying device
OUTPUT: ...serial = 0x63000FE
OUTPUT: ...chip-id = 0x705
OUTPUT: ...chip-rev = 0x0
OUTPUT: ...sv-sbl = 0x0
OUTPUT: OKAY [ 0.002s]
OUTPUT: finding files
OUTPUT: ...programmer = programmer.mbn
OUTPUT: ...singleimage = singleimage.bin
OUTPUT: OKAY [ 0.001s]
OUTPUT: validating files
OUTPUT: OKAY [ 0.002s]
OUTPUT: switching to download mode
OUTPUT: OKAY [ -0.000s]
OUTPUT: greeting device for image downloading
OUTPUT:
OUTPUT: OKAY [ -0.000s]
OUTPUT: sending programmer
OUTPUT: Unexpected packet: 4. Was expecting: 3
OUTPUT: FAILED (blank-flash:sahara-transfer-image:send-image:unexpected packet)
OUTPUT:
hemikranion said:
anyone knows why I get this error?
**** QBOOT SELECTION STARTED: ****
**** BOOTLOADER FLASHING STARTED: ****
OUTPUT: opening device: \\.\COM9
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: OKAY [ 0.001s]
OUTPUT: identifying device
OUTPUT: ...serial = 0x63000FE
OUTPUT: ...chip-id = 0x705
OUTPUT: ...chip-rev = 0x0
OUTPUT: ...sv-sbl = 0x0
OUTPUT: OKAY [ 0.002s]
OUTPUT: finding files
OUTPUT: ...programmer = programmer.mbn
OUTPUT: ...singleimage = singleimage.bin
OUTPUT: OKAY [ 0.001s]
OUTPUT: validating files
OUTPUT: OKAY [ 0.002s]
OUTPUT: switching to download mode
OUTPUT: OKAY [ -0.000s]
OUTPUT: greeting device for image downloading
OUTPUT:
OUTPUT: OKAY [ -0.000s]
OUTPUT: sending programmer
OUTPUT: Unexpected packet: 4. Was expecting: 3
OUTPUT: FAILED (blank-flash:sahara-transfer-image:send-image:unexpected packet)
OUTPUT:
Click to expand...
Click to collapse
Navigate in your bootloader to factory mode and then press the power button around 20-40 times before it boots up...Then unlock the bootloader and flash the Stock ROM for your model
the device does not start at all, there just led blinking on moto g4 plus
bsuthar said:
the device does not start at all, there just led blinking on moto g4 plus
Click to expand...
Click to collapse
Just flash your device with stock rom using sp flash tools .your device will start.
What he said ^^ Download the latest Stock ROM for your device, and issue the commands mentioned in @fratellos link one after another most likely you should get it back up.
skkethwas said:
Just flash your device with stock rom using sp flash tools .your device will start.
Click to expand...
Click to collapse
plss help me....
i have moto e4 and i don't know which file flashed first preloader.bin or pgpt.bin
first of all i flash preloader.bin and other factory images when i am going to flash pgpt.bin command ended up with error like this "PGPT: partition table not found" . after this wiped userdata and relock the bootloader. on fastboot reboot device cannot boot into system, no bootlogo, no fastboot, no recovery but recognized by PC and Miracle tool also charging led blink.
is this a softbrick or hardbrick.
Moto E4 won't power on. only white light led comes up when connecting with pc or charger. device recognized by pc.
kartik verma said:
plss help me....
i have moto e4 and i don't know which file flashed first preloader.bin or pgpt.bin
first of all i flash preloader.bin and other factory images when i am going to flash pgpt.bin command ended up with error like this "PGPT: partition table not found" . after this wiped userdata and relock the bootloader. on fastboot reboot device cannot boot into system, no bootlogo, no fastboot, no recovery but recognized by PC and Miracle tool also charging led blink.
is this a softbrick or hardbrick.
Moto E4 won't power on. only white light led comes up when connecting with pc or charger. device recognized by pc.
Click to expand...
Click to collapse
I think this can help you
https://forum.xda-developers.com/moto-e4/how-to/moto-e4-guide-stock-firmware-restore-t3661684
Hi everyone,
I am having a problem to my moto G xt1032 which i recently updated through OTA. afetr I installed it dies. never turning on. but the led light will blink after i charge a few minutes. but never turn on.
Do anyone have an idea?
please help me.
I would really appreciate and commend.
thank you.
Firstly I flashed it with a xt1033 firmware 4.4.4 which has a dual sim flatform due to I cannot flash it with its own xt1032 firmware. maybe its a corrupt file.
After done flashing with xt1033, the phone work perfectly. it only happens after i recieved the system update from android system update
It is recognized by your PC ?
Sent from my SM-T116 using XDA Free mobile app
Soufiansky said:
It is recognized by your PC ?
Sent from my SM-T116 using XDA Free mobile app
Click to expand...
Click to collapse
Qualcomm HS-USB QDLoader 9008
on device manager
skripton78 said:
Qualcomm HS-USB QDLoader 9008
on device manager
Click to expand...
Click to collapse
Can you try to flash again the stock firmware ?
no display at all. i had try 2 and 15 minute method, even i tried removing and draining the electrons lift on the board no effects.
i cant put to recovery and fastboot mode. but the phone was detected as Qualcomm HS-USB QDLoader 9008. but commands is only waiting for device.
in short, dead.
skripton78 said:
Qualcomm HS-USB QDLoader 9008
on device manager
Click to expand...
Click to collapse
its bricked. you need blank flash files to flash the bootloader again, here try this http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
blank-flash
nk-flash
opening device: \\.\COM11
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x485D868
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ -0.000s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ -0.000s]
validating files
OKAY [ 0.080s]
switching to download mode
OKAY [ 0.010s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.010s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error reading packet)
C:\Users\khyrt klyetz\Downloads\Compressed\blankflash\blankflash>pause
Press any key to continue . . .
skripton78 said:
nk-flash
opening device: \\.\COM11
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x485D868
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ -0.000s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ -0.000s]
validating files
OKAY [ 0.080s]
switching to download mode
OKAY [ 0.010s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.010s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error reading packet)
C:\Users\khyrt klyetz\Downloads\Compressed\blankflash\blankflash>pause
Press any key to continue . . .
Click to expand...
Click to collapse
FYI : this is already unlocked : status code 3 last time i'd flashed the firmware.
skripton78 said:
FYI : this is already unlocked : status code 3 last time i'd flashed the firmware.
Click to expand...
Click to collapse
do anyone have? here.
My Moto E has been dead.......
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)"....The pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my TWRP to 3.0.2 Successfully. Then I Wiped to Factory and installed cm14.1 Successfully...eventually When i tried installing Open Gaaps it failed showing not sufficient storage space......
Then I tried formatting internal SD and also wanted to format external SD but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this I tried formatting using "fastboot format external_sd" in fastboot....It gave me error 'unable to format raw partition"....then after googling I got to know that I had used External SD as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\Admin\Desktop\blankflash\blankflash>pause
Press any key to continue . . "
Then i read in one of the forum that blankflash is for moto G device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
I aslo found this Guide : (Unbrick Qualcomm mobiles with Step-by-step guide)... but in this guide the phone is showing : "Qualcomm HS-USB QDLoader 9008" and my device is showing : "RELINK HS-USB QDLoader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
Hope this is correct section to post this thread
tejeshjadhav.tj said:
My Moto E has been dead.......
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)"....The pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my TWRP to 3.0.2 Successfully. Then I Wiped to Factory and installed cm14.1 Successfully...eventually When i tried installing Open Gaaps it failed showing not sufficient storage space......
Then I tried formatting internal SD and also wanted to format external SD but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this I tried formatting using "fastboot format external_sd" in fastboot....It gave me error 'unable to format raw partition"....then after googling I got to know that I had used External SD as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\Admin\Desktop\blankflash\blankflash>pause
Press any key to continue . . "
Then i read in one of the forum that blankflash is for moto G device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
I aslo found this Guide : (Unbrick Qualcomm mobiles with Step-by-step guide)... but in this guide the phone is showing : "Qualcomm HS-USB QDLoader 9008" and my device is showing : "RELINK HS-USB QDLoader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
Hope this is correct section to post this thread
Click to expand...
Click to collapse
Yeah pls help me I am stuck at same problem...
Even I have a dead moto e
Pls give a solution
Same here
Devs pls give a legit solution
This happened to my phone while updating OTA
This happened 1 month ago......still no solution ?
Even mine's dead. Help needed.
tejeshjadhav.tj said:
my moto e has been dead.......
It doesnt power up at all.....when i press power + voldown together nothing happens and when i do it while plugged in the notification led blinks once......and when plugged into pc it shows "relink hs-usb qdloader 9008 (com3)"....the pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my twrp to 3.0.2 successfully. Then i wiped to factory and installed cm14.1 successfully...eventually when i tried installing open gaaps it failed showing not sufficient storage space......
Then i tried formatting internal sd and also wanted to format external sd but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this i tried formatting using "fastboot format external_sd" in fastboot....it gave me error 'unable to format raw partition"....then after googling i got to know that i had used external sd as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
I tried blankflash.bat but its giving error "
.c:\users\admin\desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\com3
okay [ -0.000s]
greeting device for command mode
okay [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
okay [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
okay [ 0.000s]
validating files
okay [ 0.000s]
switching to download mode
okay [ 0.016s]
greeting device for image downloading
okay [ 0.000s]
sending programmer
okay [ 0.016s]
flashing singleimage
failed (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
c:\users\admin\desktop\blankflash\blankflash>pause
press any key to continue . . "
then i read in one of the forum that blankflash is for moto g device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
i aslo found this guide : (unbrick qualcomm mobiles with step-by-step guide)... But in this guide the phone is showing : "qualcomm hs-usb qdloader 9008" and my device is showing : "relink hs-usb qdloader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
hope this is correct section to post this thread
Click to expand...
Click to collapse
my moto e is dead since the past 3 days. Was flashing it and made a mistake.
Same problem my younger brother ****ed up with his phone and I didn't got solution
Please
i have some problem sir (
tejeshjadhav.tj said:
My Moto E has been dead.......
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)"....The pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my TWRP to 3.0.2 Successfully. Then I Wiped to Factory and installed cm14.1 Successfully...eventually When i tried installing Open Gaaps it failed showing not sufficient storage space......
Then I tried formatting internal SD and also wanted to format external SD but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this I tried formatting using "fastboot format external_sd" in fastboot....It gave me error 'unable to format raw partition"....then after googling I got to know that I had used External SD as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\Admin\Desktop\blankflash\blankflash>pause
Press any key to continue . . "
Then i read in one of the forum that blankflash is for moto G device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
I aslo found this Guide : (Unbrick Qualcomm mobiles with Step-by-step guide)... but in this guide the phone is showing : "Qualcomm HS-USB QDLoader 9008" and my device is showing : "RELINK HS-USB QDLoader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
Hope this is correct section to post this thread
Click to expand...
Click to collapse
slayer_cyrus said:
Yeah pls help me I am stuck at same problem...
Click to expand...
Click to collapse
Tapriwalaraju said:
Pls give a solution
Click to expand...
Click to collapse
Dobbypoly said:
Devs pls give a legit solution
Click to expand...
Click to collapse
Danymanidy said:
This happened 1 month ago......still no solution
Click to expand...
Click to collapse
JosephBlessingh said:
my moto e is dead since the past 3 days. Was flashing it and made a mistake.
Click to expand...
Click to collapse
The invincibles said:
Please
Click to expand...
Click to collapse
mazoerkam said:
i have some problem sir (
Click to expand...
Click to collapse
@mazoerkam @The invincibles @JosephBlessingh @Danymanidy @Dobbypoly @Tapriwalaraju @slayer_cyrus @tejeshjadhav.tj Have a look at my DevDB project - Unbrick hard bricked Motorola Moto E - Aravind V. Nair
tejeshjadhav.tj said:
My Moto E has been dead.......
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)"....The pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my TWRP to 3.0.2 Successfully. Then I Wiped to Factory and installed cm14.1 Successfully...eventually When i tried installing Open Gaaps it failed showing not sufficient storage space......
Then I tried formatting internal SD and also wanted to format external SD but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this I tried formatting using "fastboot format external_sd" in fastboot....It gave me error 'unable to format raw partition"....then after googling I got to know that I had used External SD as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\Admin\Desktop\blankflash\blankflash>pause
Press any key to continue . . "
Then i read in one of the forum that blankflash is for moto G device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
I aslo found this Guide : (Unbrick Qualcomm mobiles with Step-by-step guide)... but in this guide the phone is showing : "Qualcomm HS-USB QDLoader 9008" and my device is showing : "RELINK HS-USB QDLoader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
Hope this is correct section to post this thread
Click to expand...
Click to collapse
Does it get fixed tejasjadhav.tj[/MENTION]
moto e xt1022 hardrick
My Moto E xt1022 has been dead
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qbo ot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
plz help me sir
sagary727 said:
My Moto E xt1022 has been dead
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qbo ot.exe blank-flash
opening device: \.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
plz help me sir
Click to expand...
Click to collapse
Follow this Tell me if this helps
https://forum.xda-developers.com/moto-e/general/unbrick-hard-bricked-moto-e-t2974093/amp/
mannu233 said:
Does it get fixed tejasjadhav.tj[/MENTION]
Click to expand...
Click to collapse
No It didnt got fixed by my efforts.
But got it repaired in Pune..
That guy Used JTAG to flash Firmware took like 5 mins n done... Costed Rs.500
still using that phone.
.
.how to unbrick a bricked moto g6 plusThanks to @vache we can now flash a blankflash file to unbrick our devices.
Things you'll need:
Drivers
The blankflash zip
Stock ROM or a custom ROM
How to unbrick:
step 1: extract the blankflash.zip
step 2: run the blank-flash.bat file (or blank-flash.sh if you use Linux). Your phone should boot into fastboot now.
step 3: now you can flash your stock ROM (or TWRP and then a custom ROM).
ahmed.al said:
.
.how to unbrick a bricked moto g6 plusThanks to @vache we can now flash a blankflash file to unbrick our devices.
Things you'll need:
Drivers
The blankflash zip
Stock ROM or a custom ROM
How to unbrick:
step 1: extract the blankflash.zip
step 2: run the blank-flash.bat file (or blank-flash.sh if you use Linux). Your phone should boot into fastboot now.
step 3: now you can flash your stock ROM (or TWRP and then a custom ROM).
Click to expand...
Click to collapse
Dude, but my device does not even enter in Fastboot mode, because I switched the Slots from A to B, does it even work? I'll take the test soon and report here the results. Many thanks to you and everyone who helped to make this Thread
luiz_neto said:
Dude, but my device does not even enter in Fastboot mode, because I switched the Slots from A to B, does it even work? I'll take the test soon and report here the results. Many thanks to you and everyone who helped to make this Thread
Click to expand...
Click to collapse
Well, did it work for you?
ahmed.al said:
Well, did it work for you?
Click to expand...
Click to collapse
I haven't tested it, I'll test it tomorrow and leave the feedback here.
ahmed.al said:
.
.how to unbrick a bricked moto g6 plusThanks to @vache we can now flash a blankflash file to unbrick our devices.
Things you'll need:
Drivers
The blankflash zip
Stock ROM or a custom ROM
How to unbrick:
step 1: extract the blankflash.zip
step 2: run the blank-flash.bat file (or blank-flash.sh if you use Linux). Your phone should boot into fastboot now.
step 3: now you can flash your stock ROM (or TWRP and then a custom ROM).
Click to expand...
Click to collapse
Man, unfortunately it didn't work out. Shows this in CMD:
C:\Users\Neto\Desktop\[GUIA] Como fazer o Unbrick do Moto G6 Plus>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM6
[ 0.000] Detecting device
[ 34.380] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.380] Check qboot_log.txt for more details
[ 34.380] Total time: 34.380s
FAILED: qb_flash_singleimage()->sahara_greet_device()->change_mode()->do_hello()->IO error
C:\Users\Neto\Desktop\[GUIA] Como fazer o Unbrick do Moto G6 Plus>pause
Log File details:
**** Log buffer [000001] 2018-05-14_10:59:17 ****
[ 0.000] Opening device: \\.\COM6
[ 0.000] Detecting device
[ 34.380] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.380] Check qboot_log.txt for more details
[ 34.380] Total time: 34.380s
[ 34.380]
[ 34.380] qboot version 3.86
[ 34.380]
[ 34.380] DEVICE {
[ 34.380] name = "\\.\COM6",
[ 34.380] flags = "0x64",
[ 34.380] addr = "0x62FD64",
[ 34.380] api.bnr = "0xEE2CB0",
[ 34.380] }
[ 34.380]
[ 34.380]
[ 34.380] Backup & Restore {
[ 34.380] num_entries = 0,
[ 34.380] restoring = "false",
[ 34.380] backup_error = "not started",
[ 34.380] restore_error = "not started",
[ 34.380] }
[ 34.380]
luiz_neto said:
Man, unfortunately it didn't work out. Shows this in CMD:
C:\Users\Neto\Desktop\[GUIA] Como fazer o Unbrick do Moto G6 Plus>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM6
[ 0.000] Detecting device
[ 34.380] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.380] Check qboot_log.txt for more details
[ 34.380] Total time: 34.380s
FAILED: qb_flash_singleimage()->sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.380] }
[ 34.380]
Click to expand...
Click to collapse
Hmm, try the blankflash a few times - sometimes the blankflashes take several attempts to open a stable sahara connection to your device. Looking at the hex code of the included singleimage.bin, this blankflash is for SDM630 Motorola devices, though I don't know how new or old it is with regards to your bootloader .
Just asking, are you able to power off your device and try booting to the bootloader with the power/volume keys held down? I'm just curious as to how your device won't boot into the bootloader.
@luiz_neto try:
holding the power and volume down button for 2 minutes
an USB with more power
try it again and again and again (it doesn't usually work right away)
ahmed.al said:
@luiz_neto try:
holding the power and volume down button for 2 minutes
an USB with more power
try it again and again and again (it doesn't usually work right away)
Click to expand...
Click to collapse
I do not understand, hold the power button + volume down for 2 minutes and then run the blank-Flash or execute the blank-flash first to do the process? And what do you mean "an USB with more power"? I'm using the device's own USB cable.
---------- Post added at 03:46 PM ---------- Previous post was at 03:36 PM ----------
ahmed.al said:
@luiz_neto try:
holding the power and volume down button for 2 minutes
an USB with more power
try it again and again and again (it doesn't usually work right away)
Click to expand...
Click to collapse
Now i have in cmd:
C:\Users\Hermerson\Desktop\blankflash>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM3
[ 0.016] Detecting device
[ 0.031] ...cpu.id = 172 (0xac)
[ 0.031] ...cpu.sn = 2641944531 (0x9d78dfd3)
[ 0.031] Opening singleimage
[ 0.172] Loading package
[ 0.203] ...filename = pkg.xml
[ 0.218] Loading programmer
[ 0.246] ...filename = programmer.elf
[ 0.246] Sending programmer
[ 0.324] ReadFile() failed, GetLastError()=0
[ 0.434] ReadFile() failed, GetLastError()=0
[ 0.965] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.965] ERROR: sahara_download()->general error
[ 0.965] Check qboot_log.txt for more details
[ 0.965] Total time: 0.965s
FAILED: qb_flash_singleimage()->sahara_download()->general error
C:\Users\Hermerson\Desktop\blankflash>pause
And in Log file:
**** Log buffer [000001] 2018-05-14_12:43:55 ****
[ 0.000] Opening device: \\.\COM3
[ 0.016] Detecting device
[ 0.016] ...cpu.id = 172 (0xac)
[ 0.016] ...cpu.sn = 2641944531 (0x9d78dfd3)
[ 0.016] Opening singleimage
[ 0.016] Loading package
[ 0.031] ...filename = pkg.xml
[ 0.031] Loading programmer
[ 0.031] ...filename = programmer.elf
[ 0.031] Sending programmer
[ 0.109] ReadFile() failed, GetLastError()=0
[ 0.218] ReadFile() failed, GetLastError()=0
[ 0.782] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.782] ERROR: sahara_download()->general error
[ 0.782] Check qboot_log.txt for more details
[ 0.798] Total time: 0.798s
[ 0.798]
[ 0.798] qboot version 3.86
[ 0.798]
[ 0.798] DEVICE {
[ 0.798] name = "\\.\COM3",
[ 0.798] flags = "0x64",
[ 0.798] addr = "0x22FD74",
[ 0.798] sahara.current_mode = "0",
[ 0.798] api.buffer = "0x16D0020",
[ 0.798] cpu.serial = "2641944531",
[ 0.798] cpu.id = "172",
[ 0.798] cpu.sv_sbl = "1",
[ 0.798] cpu.name = "SDM630",
[ 0.798] storage.type = "eMMC",
[ 0.798] sahara.programmer = "programmer.elf",
[ 0.798] api.bnr = "0x1629140",
[ 0.798] }
[ 0.798]
[ 0.798]
[ 0.798] Backup & Restore {
[ 0.798] num_entries = 0,
[ 0.798] restoring = "false",
[ 0.798] backup_error = "not started",
[ 0.798] restore_error = "not started",
[ 0.798] }
[ 0.798]
Try it again and again with a different pc or usb cable. It took Erfan 20 tries with 4 different PC’s.
Verzonden vanaf mijn iPhone met Tapatalk
luiz_neto said:
<snip>
Now i have in cmd:
C:\Users\Hermerson\Desktop\blankflash>.\qboot.exe blank-flash
Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM3
[ 0.016] Detecting device
[ 0.031] ...cpu.id = 172 (0xac)
[ 0.031] ...cpu.sn = 2641944531 (0x9d78dfd3)
[ 0.031] Opening singleimage
[ 0.172] Loading package
[ 0.203] ...filename = pkg.xml
[ 0.218] Loading programmer
[ 0.246] ...filename = programmer.elf
[ 0.246] Sending programmer
[ 0.324] ReadFile() failed, GetLastError()=0
[ 0.434] ReadFile() failed, GetLastError()=0
[ 0.965] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.965] ERROR: sahara_download()->general error
[ 0.965] Check qboot_log.txt for more details
[ 0.965] Total time: 0.965s
FAILED: <snip>
[ 0.798]
Click to expand...
Click to collapse
Hmm, so the blankflash does make contact with your device, establishes a connection and sends over the programmer to verify your device, but the programmer reports an incorrect response...
What happens if you try the blankflash again, do you get a different response? Seems you're getting closer. The power and volume key trick has been suggested: (credit to https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016 )
Or any other error, then its little tricky to solve this.
Follow the below steps.
1. Keep your mobile connected using USB, obviously.
2. using one hand keep power button and volume down button pressed at same time and using other hand click blank-flash.bat file.
3. It might be possible that blank-flash.bat scritps get finished earlier, in that case, keep clicking .bat file continuously, you don't need to close previous cmd window. For me it took 5-6 run to get script detect/communicate with device. Here idea is that your mobile should get detected when you press power button+volume button while blank-flash.bat file is still executing.
4. keep trying step 3 unless you dont see below logs.
Click to expand...
Click to collapse
Having a look in the Pixel forums (also with a A/B partition system), users that have experienced similar issues a couple of years ago had to have their device replaced. I'm hoping we can get your device working without having to pay for a repair... https://forum.xda-developers.com/pixel-xl/help/pixelxl-bricked-t3517310
echo92 said:
Hmm, so the blankflash does make contact with your device, establishes a connection and sends over the programmer to verify your device, but the programmer reports an incorrect response...
What happens if you try the blankflash again, do you get a different response? Seems you're getting closer. The power and volume key trick has been suggested: (credit to https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016 )
Having a look in the Pixel forums (also with a A/B partition system), users that have experienced similar issues a couple of years ago had to have their device replaced. I'm hoping we can get your device working without having to pay for a repair... https://forum.xda-developers.com/pixel-xl/help/pixelxl-bricked-t3517310
Click to expand...
Click to collapse
Doesn't work, i'll wait a update of blank-flash file.
luiz_neto said:
Doesn't work, i'll wait a update of blank-flash file.
Click to expand...
Click to collapse
You might be waiting a long time - those blankflashes are usually a leak from Motorola internal development. As such, we don't have access to new files and we're very lucky to get the ones we have. As far as I understand, we can't make them ourselves, as the blankflashes are signed by Motorola, and attempts to change the blankflash may break the signature (though this is old, I would not be surprised if the same still holds: https://forum.xda-developers.com/showpost.php?p=62191317&postcount=2112 )
Unless there's an updated SDM630 blankflash for the G6 Plus (or the X4?), you may have to consider a replacement or service repair.
ahmed.al said:
Try it again and again with a different pc or usb cable. It took Erfan 20 tries with 4 different PC’s.
Verzonden vanaf mijn iPhone met Tapatalk
Click to expand...
Click to collapse
Did you have the same problem as me? Had your moto G6 bricked too?
---------- Post added at 02:46 PM ---------- Previous post was at 02:36 PM ----------
echo92 said:
You might be waiting a long time - those blankflashes are usually a leak from Motorola internal development. As such, we don't have access to new files and we're very lucky to get the ones we have. As far as I understand, we can't make them ourselves, as the blankflashes are signed by Motorola, and attempts to change the blankflash may break the signature (though this is old, I would not be surprised if the same still holds: https://forum.xda-developers.com/showpost.php?p=62191317&postcount=2112 )
Unless there's an updated SDM630 blankflash for the G6 Plus (or the X4?), you may have to consider a replacement or service repair.
Click to expand...
Click to collapse
Since the Moto X4 has the same Chipset as Moto G6, can I use the same Blanck flash of the X4 on the G6? Since the Chipset of the two is the SDM630.
@luiz_neto there's nothing wrong with the blankflash. As mentioned earlier you need to try it a ****load of times (this is common). Using the moto X4's blankflash will change nothing.
luiz_neto said:
Did you have the same problem as me? Had your moto G6 bricked too?
---------- Post added at 02:46 PM ---------- Previous post was at 02:36 PM ----------
Since the Moto X4 has the same Chipset as Moto G6, can I use the same Blanck flash of the X4 on the G6? Since the Chipset of the two is the SDM630.
Click to expand...
Click to collapse
In theory, you could use the X4 blankflash - but the bootloaders would ideally have to be the same/similar to reduce the chance of any issues later on. That is if there even is an X4 blankflash...
If ahmed.al's and my suggestions to try the blankflash a few more times doesn't work, then it looks like you may have to talk to Motorola/your retailer and see if they'd be willing to repair/replace it. However, with an unlocked bootloader, I'm not sure if they will charge you. I don't know of a way to change back to the previous bootloader slot without fastboot.
luiz_neto said:
Did you have the same problem as me? Had your moto G6 bricked too?
---------- Post added at 02:46 PM ---------- Previous post was at 02:36 PM ----------
Since the Moto X4 has the same Chipset as Moto G6, can I use the same Blanck flash of the X4 on the G6? Since the Chipset of the two is the SDM630.
Click to expand...
Click to collapse
have you tried with linux? maybe you can get a more stable usb connection
jekyll86 said:
have you tried with linux? maybe you can get a more stable usb connection
Click to expand...
Click to collapse
Not yet, just run the blank-flash.sh file on Linux???
luiz_neto said:
Not yet, just run the blank-flash.sh file on Linux???
Click to expand...
Click to collapse
yes, give it a try
jekyll86 said:
yes, give it a try
Click to expand...
Click to collapse
nothing happens dude. :crying:
luiz_neto said:
nothing happens dude. :crying:
Click to expand...
Click to collapse
What error do you see?
Hey all. Ran into a bit of an issue. My Motorola Edge Plus (XT2061-3) is stuck in EDL mode. I have managed to locate the blankflash file for this device. When trying to flash it, this is the errors I get. (Got this blankflash of Lolinet under Burton > Blankflash)
"Motorola qboot utility version 3.86
[ 0.000] Opening device: \\.\COM3
[ 0.008] Detecting device
[ 0.010] ...cpu.id = 195 (0xc3)
[ 0.010] ...cpu.sn = 621922316 (0x2511c80c)
[ 0.010] Opening singleimage
[ 0.020] Loading package
[ 0.022] ...filename = pkg.xml
[ 0.024] Loading programmer
[ 0.024] ...filename = programmer.elf
[ 0.024] Sending programmer
[ 0.089] ReadFile() failed, GetLastError()=0
[ 0.454] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.455] ERROR: sahara_download()->general error
[ 0.455] Check qboot_log.txt for more details
[ 0.455] Total time: 0.456s
FAILED: qb_flash_singleimage()->sahara_download()->general error
blankflash_from_QPBS30.188-48-3 (1)>pause
Press any key to continue . . ."
From the log file:
"
[ 0.000] Opening device: \\.\COM6
[ 0.001] Detecting device
[ 0.003] ...cpu.id = 195 (0xc3)
[ 0.003] ...cpu.sn = 621922316 (0x2511c80c)
[ 0.003] Opening singleimage
[ 0.013] Loading package
[ 0.016] ...filename = pkg.xml
[ 0.017] Loading programmer
[ 0.018] ...filename = programmer.elf
[ 0.018] Sending programmer
[ 0.088] ReadFile() failed, GetLastError()=0
[ 0.335] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 0.336] ERROR: sahara_download()->general error
[ 0.336] Check qboot_log.txt for more details
[ 0.336] Total time: 0.338s
[ 0.336]
[ 0.336] qboot version 3.86
[ 0.336]
[ 0.336] DEVICE {
[ 0.336] name = "\\.\COM6",
[ 0.336] flags = "0x64",
[ 0.336] addr = "0x62FD54",
[ 0.336] sahara.current_mode = "0",
[ 0.336] api.buffer = "0x2A5A020",
[ 0.336] cpu.serial = "621922316",
[ 0.336] cpu.id = "195",
[ 0.336] cpu.sv_sbl = "1",
[ 0.336] cpu.name = "SM8250",
[ 0.336] storage.type = "UFS",
[ 0.336] sahara.programmer = "programmer.elf",
[ 0.336] api.bnr = "0x2993FE0",
[ 0.336] }
[ 0.336]
[ 0.336]
[ 0.336] Backup & Restore {
[ 0.336] num_entries = 0,
[ 0.336] restoring = "false",
[ 0.336] backup_error = "not started",
[ 0.336] restore_error = "not started",
[ 0.336] }
[ 0.336]
"
It tries to send "programmer.elf" and "pkg.xml". The blankflash package does not contain those files. I have all the correct drivers. The phone shows up as "Qualcomm HS-USB QDLoader 9008" in Device Manager.
Any help is greatly appreciated. I've been stuck on this for quite a while.
latest blank flash for android 11
download here
I just brought my edge back to life. hope it helps. remember to update gpt.bin of ur own version
jackeylei said:
latest blank flash for android 11
download here
I just brought my edge back to life. hope it helps. remember to update gpt.bin of ur own version
Click to expand...
Click to collapse
It worked! Thank you so much for providing this.
I have the same problem on moto edge 20 pro any suggestions thank you very much
I have the same problem on moto edge foto here https://ibb.co/7Vz3vBg help me plss
jackeylei said:
último flash en blanco para android 11
descarga aquí
Acabo de traer mi borde de vuelta a la vida. Espero eso ayude. recuerda actualizar gpt.bin de tu propia versión
Click to expand...
Click to collapse
¿Puede indicar los pasos para actualizar gpt.bin?
marcoryu said:
¿Puede indicar los pasos para actualizar
Click to expand...
Click to collapse
There are some tutorial posts in this forum, just search for posts related to blank flash and understand how to use.
My general suggestion is to "extract some files from the firmware and put them into the singleimage file in the blank flash folder".
jackeylei said:
There are some tutorial posts in this forum, just search for posts related to blank flash and understand how to use.
My general suggestion is to "extract some files from the firmware and put them into the singleimage file in the blank flash folder".
Click to expand...
Click to collapse
exactly which firmware files should i move to the blankflash folder
AREALE said:
I have the same problem on moto edge foto here https://ibb.co/7Vz3vBg help me plss
Click to expand...
Click to collapse
Just keep trying
marcoryu said:
exactly which firmware files should i move to the blankflash folder
Click to expand...
Click to collapse
1. You have to determine which firmware ur phone is on when bricked then download the firmware from here and the right blankflash file here
2. Get gpt.bin from the firmware, and put it into singleimage file.
3. Flash
Refer to this post:
[BLANKFLASH] Moto G7 XT1962-5 RIVER RETEU 9.0 PPO29.80-66
I have built a blankflash that revived my XT1962-5, which had firmware PPO29.80-66 before hardbricking it. Maybe it is useful to others: https://www27.zippyshare.com/v/lL4eo830/file.html The blankflash is based on this firmware...
forum.xda-developers.com
good morning friend, could you help me create the blank flash to be able to recover my device, thank you very much for answering and for your help
jackeylei said:
1. You have to determine which firmware ur phone is on when bricked then download the firmware from here and the right blankflash file here
2. Get gpt.bin from the firmware, and put it into singleimage file.
3. Flash
Refer to this post:
[BLANKFLASH] Moto G7 XT1962-5 RIVER RETEU 9.0 PPO29.80-66
I have built a blankflash that revived my XT1962-5, which had firmware PPO29.80-66 before hardbricking it. Maybe it is useful to others: https://www27.zippyshare.com/v/lL4eo830/file.html The blankflash is based on this firmware...
forum.xda-developers.com
Click to expand...
Click to collapse
good morning friend, could you help me create the blank flash to be able to recover my device, thank you very much for answering and for your help
marcoryu said:
good morning friend, could you help me create the blank flash to be able to recover my device, thank you very much for answering and for your it
Click to expand...
Click to collapse
When the phone bricked, is it on Android 11 or 10? When it happened?
jackeylei said:
When the phone bricked, is it on Android 11 or 10? When it happened?
Click to expand...
Click to collapse
Android 11 https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in this version it was when it was blocked
marcoryu said:
Android 11 https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in this version it was when it was blocke
Click to expand...
Click to collapse
windows recognizes it as Qulcomm hs-usb Dloader 9008
Have u tried this blankflash? if yes, what's the error msg?
I assume that you already know how to use blankflash. otherwise, it is difficult for me to explain.
jackeylei said:
Have u tried this blankflash? if yes, what's the error msg?
I assume that you already know how to use blankflash. otherwise, it is difficult for me to explain.
Click to expand...
Click to collapse
Here I attach the blankflash file which I update the gpt.bin provided in your firmware. Try the original blankflash first, if failed, try this one.
jackeylei said:
Here I attach the blankflash file which I update the gpt.bin provided in your firmware. Try the original blankflash first, if failed, try this one.
Click to expand...
Click to collapse
hello mate and tried the blank flash file of version 19.50 and the one you sent me and both give me this error
marcoryu said:
hello mate and tried the blank flash file of version 19.50 and the one you sent me and both give me this error
Click to expand...
Click to collapse
Try , keep trying.
Based on my personal understanding, u have only one chance to blank flash ur phone during the connection with pc.
Therefore after u plug in the USB, u should keep running blank-flash command until the real results display.
Try.
Check others posts about blank flash.