Related
hacking on meizu to change the distribution channel , I got stuck in the state of locked bootloader , using the command " fastboot oem unlock " by getting this error
trust arm ??
KoalKillerUbU said:
hacking on meizu to change the distribution channel , I got stuck in the state of locked bootloader , using the command " fastboot oem unlock " by getting this error
trust arm ??
Click to expand...
Click to collapse
Do you solved you problem ?
I have the same issue
Binuts said:
Do you solved you problem ?
I have the same issue
Click to expand...
Click to collapse
meizu pro 5 Ubuntu edition use a asiatic version..... puff
KoalKillerUbU said:
meizu pro 5 Ubuntu edition use a asiatic version..... puff
Click to expand...
Click to collapse
Ok, if i use multiupgrade with the chiness folder of this link a have a chance to flash my pro 5 ?
I also have the Ubuntu edition, Is there any way I can help you? I don't know if I can extract the fastboot from my phone, which is unlocked.
Pleytos said:
I also have the Ubuntu edition, Is there any way I can help you? I don't know if I can extract the fastboot from my phone, which is unlocked.
Click to expand...
Click to collapse
Hello, Thank you for this proposal.
For now I have no idea of how to save the bootloader or the recovery.
But i think it was blocked because i have a bootloader locked and no recovery.
The only way seems to be a full write of the memory with the meizu tools.
I have test with a android rom but they don't work "token sign failed".
If you can upload the bootloader.img and the recovery.img, i this, you can save my phone
KoalKillerUbU said:
hacking on meizu to change the distribution channel , I got stuck in the state of locked bootloader , using the command " fastboot oem unlock " by getting this error
trust arm ??
Click to expand...
Click to collapse
I have the exact same problem. And that 16 there in the screenshot gets incremented on every subsequent call to
Code:
fastboot oem unlock
until it reaches 256 or something, at which point the device shuts down.
Initially in fastboot mode my device would say that the bootloader is unlocked, so it was not like that from the start. But I locked it by mistake (lets say ) while trying to figure out how to make ubuntu-device-flash work (by shooting in the dark, mostly, rather than reading). Had no idea it will not let me unlock it after that.
Also before that there were some
Code:
fastboot flash all
so basically there is no OS no recovery, no nothing. Just barely getting the fastboot mode - otherwise totally useless.
Really looking forward for ideas
Greetings,
When I try to add my device at "Developer options > MI unlock status", I get an error saying "Couldn't add. Device does not exist in the server". Can you help me out?
crankdat122 said:
Greetings,
When I try to add my device at "Developer options > MI unlock status", I get an error saying "Couldn't add. Device does not exist in the server". Can you help me out?
Click to expand...
Click to collapse
I am facing same problem with my redmi note 8
crankdat122 said:
Greetings,
When I try to add my device at "Developer options > MI unlock status", I get an error saying "Couldn't add. Device does not exist in the server". Can you help me out?
Click to expand...
Click to collapse
Bro I'm also facing the same error
See this
just wait for few days and try with mi bootloader unlock tool by MI
Iam having same problem can i flash twrp without unlocking bootloader?
Device does not exist in the server.. Please help.. Any salution
Zakaria123gm said:
Iam having same problem can i flash twrp without unlocking bootloader?
Click to expand...
Click to collapse
Sir kese kiya aapne
harsh_vardhan6 said:
Bro I'm also facing the same error
Click to expand...
Click to collapse
Bhai koi salution mila ho to mujhe bhi batana
crankdat122 said:
Greetings,
When I try to add my device at "Developer options > MI unlock status", I get an error saying "Couldn't add. Device does not exist in the server". Can you help me out?
Click to expand...
Click to collapse
Same problem bro.. Koi salution h kya eska
crankdat122 said:
Greetings,
When I try to add my device at "Developer options > MI unlock status", I get an error saying "Couldn't add. Device does not exist in the server". Can you help me out?
Click to expand...
Click to collapse
same problem bro . Can someone help?
Anyone found any solution?
Zakaria123gm said:
Iam having same problem can i flash twrp without unlocking bootloader?
Click to expand...
Click to collapse
9008.
same issue let me know when you found any solutions pls !!!!!
nixk2000 said:
same issue let me know when you found any solutions pls !!!!!
Click to expand...
Click to collapse
1.Shut down your phone.
2.Hold Volume+ and Volume- , but WITHOUT power.
3.Connect it to computer.
4.If your phone's LED is flashing red lights, congratulations. You're now at 9008(EDL).
5.Download "C106-TWRP-需解压使用.zip“ from https://pan.baidu.com/s/1kdgu2YUstL...rentPath=/sharelink2927266148-452227205909178 .
6.Use QFIL(Miflash Public edition is okay,if you like) to flash it.
7.Hold Volume+ and Power（THIS IS VERY IMPORTANT AND YOU MUST GET Cool LeEco Inside RECOVERY)
8.It should boot up.
9.If you reboot to EUI,you need to do these steps again because it will destroy twrp.
318cyz said:
1.Shut down your phone.
2.Hold Volume+ and Volume- , but WITHOUT power.
3.Connect it to computer.
4.If your phone's LED is flashing red lights, congratulations. You're now at 9008(EDL).
5.Download "C106-TWRP-需解压使用.zip“ from https://pan.baidu.com/s/1kdgu2YUstL...rentPath=/sharelink2927266148-452227205909178 .
6.Use QFIL(Miflash Public edition is okay,if you like) to flash it.
7.Hold Volume+ and Power（THIS IS VERY IMPORTANT AND YOU MUST GET Cool LeEco Inside RECOVERY)
8.It should boot up.
9.If you reboot to EUI,you need to do these steps again because it will destroy twrp.
Click to expand...
Click to collapse
that link is not working i am not able to download C106-TWRP-需解压使用.zip and also is this instruction are for installing twrp ?
is so i want know how do i unlock my redmi 6a because it is saying the device does not exist on the server what should I do to force it or solve this this issues I tried reloging my account again and again also tried using unlock tool but it says add device for unlock what do I do now
nixk2000 said:
that link is not working i am not able to download C106-TWRP-需解压使用.zip and also is this instruction are for installing twrp ?
is so i want know how do i unlock my redmi 6a because it is saying the device does not exist on the server what should I do to force it or solve this this issues I tried reloging my account again and again also tried using unlock tool but it says add device for unlock what do I do now
Click to expand...
Click to collapse
O sorry i put wrong guide this guide is for Coolpad 1 Dual
nixk2000 said:
that link is not working i am not able to download C106-TWRP-需解压使用.zip and also is this instruction are for installing twrp ?
is so i want know how do i unlock my redmi 6a because it is saying the device does not exist on the server what should I do to force it or solve this this issues I tried reloging my account again and again also tried using unlock tool but it says add device for unlock what do I do now
Click to expand...
Click to collapse
But the way is same.
1.Download offical TWRP.
2.Download offical Fastboot(Yes,fastboot) flashing rom from MIUI website.
3.unzip it.
4.delete recovery.img in offical rom.
5.copy TWRP to offical rom's unzip folder and rename it recovery.img .
6.Shutdown your Phone.
7.(Try there two ways,one of them will work)
(1) Hold Volume- and connect it to PC.
(2) Turn it on. Connect to PC. Reboot. Hold Volume+.
If you do correct you will see MediaTek Port (COMx) in your PC.
8.Use MTK-Bypass. Select MT6765(even cactus is 6762,but select 6765 anyway) ,and click bypass.
9.Open SP-Flash.
10.click "Options".
11.Go to "general".
12.Make sure all three options is "false" now.
13.select appropriate files for DA and scatter BUT WITHOUT "AUTH".
14.Click Flash.
15.Reboot and hold Volume+.
16.Then it should boot up.
Same problem with my Redmi note 10 pro any solutions?
Bablu2525 said:
Device does not exist in the server.. Please help.. Any salution
Click to expand...
Click to collapse
Bro u got solution for this problem??????
I can't do anything with my phone. Can't go to the recovery and fastboot mode even 3 buttons combo doesn't help
Im getting this
ERROR MODE
Attention!
Please update system again
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
erpl said:
I can't do anything with my phone. Can't go to the recovery and fastboot mode even 3 buttons combo doesn't help
Im getting this
ERROR MODE
Attention!
Please update system again
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Click to expand...
Click to collapse
See your P.M.
is possible that you can send the whole pooting process?
you can Repair it with Software Testpoint and Full Bootloader Unlock ,and then flash a Board Software via Software Testpoint, that helps 100%!!! use the Software with logins and you have all what you need.
you must start the Software Testpoint so!!
VIDEO : how to start Software Testpoint P20 Lite
I would unlock the bootloader via Software Testpoint with DC-Phoenix, then the FBLock is unlocked and you can flash as you wish!!!! And the great thing about it is that you don't need an UnlockKey either, you can then read this with HCU client software, the only thing that's stupid is that you need a time-based license for the two programs, which you have to buy.
HCU client download
https://hcu-client.com
DC Phoenix download
https://forum.dc-unlocker.com/forum/modems-and-phones/huawei/155916-dc-phoenix
Since I accidentally bought a 3-day license twice and my P20 Lite is now completely rooted on Lineage 19.1, I can give away 2 access data, which are still valid for 2 days.
you can edit your smartphone with it.
username : bl26457
password : kKncnkMj
username : bl26390
password : JDAZqnkN
Then I wish you a lot of fun with it, hope it helps you if someone else is active in this thread.
System23 said:
you can Repair it with Software Testpoint and Full Bootloader Unlock ,and then flash a Board Software via Software Testpoint, that helps 100%!!! use the Software with logins and you have all what you need.
you must start the Software Testpoint so!!
VIDEO : how to start Software Testpoint P20 Lite
I would unlock the bootloader via Software Testpoint with DC-Phoenix, then the FBLock is unlocked and you can flash as you wish!!!! And the great thing about it is that you don't need an UnlockKey either, you can then read this with HCU client software, the only thing that's stupid is that you need a time-based license for the two programs, which you have to buy.
HCU client download
https://hcu-client.com
DC Phoenix download
https://forum.dc-unlocker.com/forum/modems-and-phones/huawei/155916-dc-phoenix
Since I accidentally bought a 3-day license twice and my P20 Lite is now completely rooted on Lineage 19.1, I can give away 2 access data, which are still valid for 2 days.
you can edit your smartphone with it.
username : bl26457
password : kKncnkMj
username : bl26390
password : JDAZqnkN
Then I wish you a lot of fun with it, hope it helps you if someone else is active in this thread.
Click to expand...
Click to collapse
Ok i forgot about this but i tried and it WORKED and now i have working phone. Thank you for help
erpl said:
Ok i forgot about this but i tried and it WORKED and now i have working phone. Thank you for help
Click to expand...
Click to collapse
ok np , i help when i can
Hi folks,
my trusty S3 (SM-T825) got broke unexpectedly. It showed "100% battery" in the morning but was unresponsive. A forced shutdown did reboot the device up to the logo-screen - from where it rebooted again. So obviously it's stuck in a boot loop.
Unfortunately, it does not enter "recovery" either (home) (up) (power). However, it DOES enter "ODIN mode" (home) (down) (power). There it shows me that FRP Lock and OEM lock both are still active. This is no wonder as it caught me unprepared. FRP lock wouldn't be a problem, as I'm the owner of the account and can supply credentials once it boots up again.
Everywhere it is STRONGLY advised to turn off OEM lock before flashing anything to not make it even worse. This renders the device essentially dead, right?
The device is still as original as it can be.
Any chance I can revive it or does that more look like a mainboard problem?
I already have ODIN and I even have an actual 4-part "Original ROM" for my region (Samfw.com_SM-T825_ATO_T825XXU3CTD1_fac.zip), but maybe TWRP and Lineage would be the better options.
Before I just go and make things worse, I'd like to ask for a qualified advice ;-)
smallfreak said:
...... There it shows me that FRP Lock and OEM lock both are still active. This is no wonder as it caught me unprepared. FRP lock wouldn't be a problem, as I'm the owner of the account and can supply credentials once it boots up again.
Everywhere it is STRONGLY advised to turn off OEM lock before flashing anything to not make it even worse. This renders the device essentially dead, right?
Click to expand...
Click to collapse
Afaik you should be able to flash stock with OEM lock active BUT idk if FRP will block flashing process.
If that happens it's imo afterwards in the same state as before so at least it won't worsen it.
Gonna loose all your data anyhow.
Got Smartswitch? This might help as well.
smallfreak said:
....... I already have ODIN and I even have an actual 4-part "Original ROM" for my region (Samfw.com_SM-T825_ATO_T825XXU3CTD1_fac.zip), but maybe TWRP and Lineage would be the better options.
Click to expand...
Click to collapse
You can't replace recovery without OEM unlock.
smallfreak said:
Before I just go and make things worse, I'd like to ask for a qualified advice ;-)
Click to expand...
Click to collapse
Dunno if I'm qualified enough
Next turn ...
I tried flashing TWRP into the AP slot with SamFW FRP-Tool (ODIN). This worked so far but got me a note on the tablet "custom recovery blocked due to FRP lock".
Checking boot on the tablet - as before. Boot loop.
Next turn ...
Code:
Select file AP_T825XXU3CTD1_CL17011592_QB30231355_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
Select file CP_T825XXU3CTA1_CP14962504_CL17011592_QB28791445_REV00_user_low_ship_MULTI_CERT.tar.md5
Select file CSC_ATO_T825ATO3CTD1_CL18361310_QB30233690_REV00_user_low_ship_MULTI_CERT.tar.md5
Reading... OK
Detect mode: Download mode
Model : SM-T825
Bit : 4
Unique number : CBJ100915EAF124
Storage : 32
Vendor : SAMSUNG
Disk : BJNB4R
Firmware : https://samfw.com/firmware/SM-T825/
Analyze files...
Flashing with SAMSUNG Mobile USB Modem (COM5)
Flash failed
Flash time: 00:47
Reading... FAIL
unchecking CP and CSC, leaving only AP.
Code:
Analyze files...
Flashing with SAMSUNG Mobile USB Modem (COM5)
Flash failed
Flash time: 10:00
Reading... FAIL
Reboot tablet in download-mode, next turn: Try BL + AP:
Code:
Select file BL_T825XXU3CTD1_CL17011592_QB30231355_REV00_user_low_ship_MULTI_CERT.tar.md5
Reading... OK
Detect mode: Download mode
Model : SM-T825
Bit : 4
Unique number : CBJ100915EAF124
Storage : 32
Vendor : SAMSUNG
Disk : BJNB4R
Firmware : https://samfw.com/firmware/SM-T825/
Analyze files...
Flashing with SAMSUNG Mobile USB Modem (COM5)
Checking file BL_T825XXU3CTD1_CL17011592_QB30231355_REV00_user_low_ship_MULTI_CERT.tar.md5
Checking file AP_T825XXU3CTD1_CL17011592_QB30231355_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
Flashing (1/20) emmc_appsboot.mbn.lz4 OK
Flashing (2/20) lksecapp.mbn.lz4 OK
Flashing (3/20) xbl.elf.lz4Flash failed
Flash time: 01:26
Tablet moans about
SW REV CHECK FAIL : [lksecapp] Fused -1 > Binary 0
Click to expand...
Click to collapse
So maybe the firmware revision is different to the currently installed one? The latest file is from 2020 and since I did the usual OTA updates, this should be the version installed. But even if not, it sould not matter to upload a newer one, right?
Anything I can check?
So then obviously "Game Over"
Another piece of expensive waste that otherwise could have served well for years to come. Yes I know, selling something just once is an inferior business model to repeatedly draining my account for the same service.
Hi there
Today i booted my honor 50 into fastboot mode and executed this command:
fastboot flashing unlock
Click to expand...
Click to collapse
this message showed up in terminal:
OKAY [ 0.162s]
Click to expand...
Click to collapse
and the attached message showed up on the phone which i didn't expect it at all
i selected "Unlock the bootloader" and it formatted my data but after it completed and i entered fastboot mode again the bootloader was still locked.
i didn't expect to my phone's bootloader become unlocked but I want to know that if this behaviour is normal/expected on Honor devices or something is changing?
При входе в личный кабинет (верхняя строка настроек) телефон выдает предупреждение о разблокировке загрузчика?
Можете подробнее описать, как вы добились такого результата?
volkodav1975 said:
When you log in to your account (the top line of settings) the phone gives a warning that the bootloader is unlocking?When you log in to your account (the top line of settings) the phone gives a warning that the bootloader is Unlocked?
Can you describe in more detail how you achieved this result?
Click to expand...
Click to collapse
After updating to Magic UI 6.0 i booted into fastboot and executed this command: fastboot flashing unlock.
and no it didn't give me any warning about bootloader when i signed in into my acc.
Ww222 said:
После обновления до Magic UI 6.0 я загрузился в fastboot и выполнил эту команду: fastboot flashing unlock.
и нет, это не дало мне никакого предупреждения о загрузчике, когда я вошел в свой аккаунт.
Click to expand...
Click to collapse
яI am Russian, it is difficult to write here, but a very interesting result. I'll try to do it at home and see what happens.
volkodav1975 said:
яI am Russian, it is difficult to write here, but a very interesting result. I'll try to do it at home and see what happens.
Click to expand...
Click to collapse
please inform me about the result if you tried it.
Ww222 said:
please inform me about the result if you tried it.
Click to expand...
Click to collapse
The result is the same as yours. Huawei hasn't had such a screen for a long time. Perhaps in the future something will give for us on the new Honor.
Ww222 said:
Hi there
Today i booted my honor 50 into fastboot mode and executed this command:
this message showed up in terminal:
and the attached message showed up on the phone which i didn't expect it at all
i selected "Unlock the bootloader" and it formatted my data but after it completed and i entered fastboot mode again the bootloader was still locked.
i didn't expect to my phone's bootloader become unlocked but I want to know that if this behaviour is normal/expected on Honor devices or something is changing?
Click to expand...
Click to collapse
i have edl firehose for honor 50, 50 lite, 60, 60 pro & 70, we can dump gpt & once we have gpt we can create a unbrick package, Interested user Please DM me..
Ww222 said:
Hi there
Today i booted my honor 50 into fastboot mode and executed this command:
this message showed up in terminal:
and the attached message showed up on the phone which i didn't expect it at all
i selected "Unlock the bootloader" and it formatted my data but after it completed and i entered fastboot mode again the bootloader was still locked.
i didn't expect to my phone's bootloader become unlocked but I want to know that if this behaviour is normal/expected on Honor devices or something is changing?
Click to expand...
Click to collapse
That's bizarre! Are you sure you were doing that on Honor 50? Could you root your deivice by using Magisk?
I am very interested in your device.
me to
my honor x9(any-lx2)
so how to unlock this phone?and How to short connect to 9008,
rnadow said:
me to
View attachment 5766267my honor x9(any-lx2)
so how to unlock this phone?and How to short connect to 9008,
Click to expand...
Click to collapse
moyuzai said:
That's bizarre! Are you sure you were doing that on Honor 50? Could you root your deivice by using Magisk?
I am very interested in your device.
Click to expand...
Click to collapse
yes pretty sure i have for honor 50 & 50 Lite, but i am asking for EDL unbrick package not root
mark332 said:
yes pretty sure i have for honor 50 & 50 Lite, but i am asking for EDL unbrick package not root
Click to expand...
Click to collapse
Are you interested in selling your Honor 50 & 50 Lite, I would love to pay an extra price that higher than you bought it.
rnadow said:
me to
View attachment 5766267my honor x9(any-lx2)
so how to unlock this phone?and How to short connect to 9008,
Click to expand...
Click to collapse
Hi, are you able to root you Honor x9? If so,
Are you interested in selling your device? I would love to pay an extra price that higher than you bought it.
moyuzai said:
Hi, are you able to root you Honor x9? If so,
Are you interested in selling your device? I would love to pay an extra price that higher than you bought it.
Click to expand...
Click to collapse
I have entered 9008 through the short contact point, but I do not have files such as firehose or GPT (I do not know what is required for Qualcomm processor to flash). I don't want to sell it, because I'm in China, and you can buy it at Amazon at a very cheap price. Thank you for your reply
mark332 said:
You can try to enter 9008 through the short contact point. The two contacts circled in the picture are short circuited. At least I enter in this way, and I don't understand the rest.
Click to expand...
Click to collapse
mark332 said:
i have edl firehose for honor 50, 50 lite, 60, 60 pro & 70, we can dump gpt & once we have gpt we can create a unbrick package, Interested user Please DM me..
Click to expand...
Click to collapse
Hello, friend, do you have the firehose of Qualcomm 680 processor? Its code is sm6225
rnadow said:
I have entered 9008 through the short contact point, but I do not have files such as firehose or GPT (I do not know what is required for Qualcomm processor to flash). I don't want to sell it, because I'm in China, and you can buy it at Amazon at a very cheap price. Thank you for your reply
Click to expand...
Click to collapse
Hey man, I am living in China as well. Are you able to root it or unlock its bootloader? We can discuss the price.
moyuzai said:
Hey man, I am living in China as well. Are you able to root it or unlock its bootloader? We can discuss the price.
Click to expand...
Click to collapse
解锁应该不太可能，自己折腾玩玩而已。前面已经说了，你可以去海淘
rnadow said:
解锁应该不太可能，自己折腾玩玩而已。前面已经说了，你可以去海淘
Click to expand...
Click to collapse
好吧，感谢老哥回复！
Hello I am trying to boot my phone to recovery mode to do a factory reset since it keeps restarting and it does not passes the Logo screen, it is stuck on a looping state. I tried to access the recovery mode usign the volume buttons but is not working, it keeps restarting. I did not enable debugging usb since I never knew I was going to need it. Any help will be greatly appreciated.
Hello everyone.
i could you some help as I got a phone for my partner. I got her an honor 70 Pro Plus. I want to know if it's possible to root it and install a working Android system instead of trying to bypass Google by using G-Box or gspace. At this stage. I would like to put any operating system that would work with the chipset it has as I haven't done anything like this in years, so I could use some help. in years, I mean about 15 year
Thank in advance