Step 1: Unlock your bootloader using either [email protected]'s instructions on XDA or the instructions video from TechnoliRama on YouTube.
Step 2: Go to EDL mode on your Phone then open QFIL and go to Tools > Partition Manager (Make sure to use the Firehose ELF file, have Storage Type set to UFS, and Build Type set to Flat Build)
Step 3: Find "boot_a" and "boot_b" and backup them both incase something goes wrong then rename them both to their actual names then exit out of QFIL and reboot your Phone.
Step 4: Transfer boot_a to your Phone and install the Magisk app (If you haven't already).
Step 5: Open the Magisk app go to Install (Magisk Section/Part) > Options/Next > Select and Patch a File, then select the boot_a BIN file and press/click on LET'S GO.
Step 6: After Magisk is done patching your boot_a file, transfer your patched Magisk IMG file to your Computer and reboot your Phone back to EDL mode.
Step 7: Open QFIL and go to Partition Manager. (Make sure again you are using the Firehose ELF file and your Storage Type is set to UFS and Build Type set to Flat Build)
Step 8: Find boot_a and boot_b and load image/flash the patched Magisk IMG file to them both.
Step 9: Exit out of QFIL and reboot your Phone and check if everything works.
Step 10: If everything works, then congratulations you now have an unlocked bootloader and rooted Phone!
I am NOT responsible if you accidentally brick your Phone, this is my first time making instructions and stuff, and please do this at your own risk.
This has been tested on the LG G8X ThinQ (LM-G850UM) Canadian model and my Phone was using 40c firmware and Android 12.
Requirements: Android 12, 40c Firmware, Whatever needed from one or both of the Instructions including Fastboot drivers, and most importantly a Brain.
Harry's Instructions: https://forum.xda-developers.com/t/...r-and-root-lg-g8x-also-a-video-guide.4198267/
TechnoliRama's Instructions:
What's working: Audio, Bluetooth, NFC, Camera App, probably everything.
Related
Hi guys,
do you have any tips, tricks for putting this phone into default system version for warranty purpose?
I am just thinking to do:
1. delete everything from phone
2. download some official Global ROM - do not know yet where to take it
3. flash it using ?! - i do not know yet
4. lock bootloader in Developer settings
Any other thing I should not miss so it will look like from shop?
Thanks
Pavel
1) Go to http://en.miui.com/a-234.html
1.a) Download the"MIUI ROM Flashing Tool" mentioned in Step 1.
1.b) In step 2 download the correct version of fastbboot file for your RMN4
2) Extract the fastboot file (.tar file) using 7zip file manager.
3) In the extracted folder you will see another file. You need to extract this file also.
4) Now install and run MIUI Rom Flashing Tool.
5) Connect your device in fastboot mode (Vol down+ power button), the attach cable.
6) Click "Select", and locate the folder where you just extracted the rom.
7) Click on "Refresh", u will see your device ID in the window.
8) At the bottom right select "clean and lock" (* will lock the bootloader and clean your entire data so make sure to backup)
9) Finally click on "Flash".
Let it complete. You now have stock rom.
INFINIX HOT S 3 ROOTING PROCEDURE WITH LOCKED BOOTLOADER
Things You must First Do
1. Install Qualcomm drivers for your PC
2. Learn how to remove the device back cover:
3. Learn how to boot the device to EDL mode :
4. Learn how to backup your device full firmware with a box like miracle box or cracked version :
5. Learn how to flash firmware with QFIL tool version 2.0.1.9 :
PROCEDURE 1
1. Get hold of your device full stock firmware. Some build numbers do not have stock firmware especially my Hot S3 build number do not have correct stock firmware.
2. Install latest official magisk manager apk.
3. Copy stock boot.img to your device internal storage.
4. Launch magisk manager app, select install magisk 18.1v or any version that will appear, there will be an options select patch boot.img. Now locate where you stored your boot.img. After patch magisk will show you the location of the patched bootimg.
5. Copy the patched boot.img into the device firmware folder. Remove the original boot.img from the firmware folder and save it somewhere and rename the patched boot.img to boot.img.
6. Now launch the QFIL tool and flash using the previous procedure.
7. After successful flash, boot to the device recovery (Volume up + power button) wipe partition and factory wipe, then power off and reboot.
8. After reboot update Google play store and services sign into your account successfully to have a recognize certify device. Install magisk manager apk. Launch magisk manager app, update and install any other updates that will pop up. Every installed thing in magisk will show green.
9. Reboot. The device successfully rooted.
NOTE:
1. Those who have their correct official firmware and have tested and working correctly, there will be firehose file, patch0 file, rawprogram0 files, NON-HLOS file. These are the necessary files for the flashing.
2. Those who don't have the correct stock firmware use the backup firmware from the miracle and rename these files as;
boot= boot.img
Cache= cache.img
dummy= dummy.img
misc= misc.img
persist= persist.img
recovery= recovery.img
splash= splash.img
system= system.img
userdata= userdata.img
aboot= emmc_appsboot.mbn
Modem=NON-HLOS bin
The rest of the files add .mbn to it end.
You need:
patch0.xml
rawprogram0.xml
prog_emmc_firehose_8937_ddr.mbn
if you don't have these files I will upload my full prepared stock firmware so that you take all the necessary files from it into yours and flash.
But if you have any downloaded stock HOT S 3 firmware with only one system and vendor inside you can use it.
3. Those who have their stock firmware, if the system and vendor in the folder is in multiple form meaning more than one ( system and vendor are in parts) you can't use QFIL tool to flash, it require different flash tool. Use your backup firmware.
4. If any find things difficult I will upload my stock firmware so that all builds can use to create their own stock firmware.
Thank you.
5. After every flash try to remove battery cable and replace for some seconds when the device cover is opened.
6. At a point where the device refuse to boot or power off, long press power button to power off or reboot.
7. Do not be in haste, take your time to follow all these procedures to avoid the device going dead. Because a device does not go dead in my hands. It may brick but when you use good and required flash files everything will be okay.
With ease, convenience and future developments for the device I have created Facebook group for that because some informations are hard to come by. I have posted a lot of help in different forums, nobody seems to help, so this how far I have gone. Now trying to Port custom recovery like twrp for the device even though bootloader is locked.
Procedure 2
1. Follow procedure 1 to backup device
2. Patch boot.img with magisk manager
3. Copy patched image rename as boot.img into backup folder.
4. Flash only the patched boot.img by any supported tool.
5. Reboot device install magisk manager apk reboot and update magisk done.
Those who have already rooted or gone far with the device can join the facebook group or provide me better links. Thanks
Facebook Group Link: https://www.facebook.com/groups/324251668449205/
CREDITS
Thanks to XDA for creating this wonderful platform
The best App ever magisk
The best tool ever Miracle box
Hamenth Jabalpuri my best friend XDA Senior Member
Thanks to everyone.
CAUTION
If any want to use this information in his site, don't forget to credit XDA.
TWRP LINK
https://forum.xda-developers.com/android/development/unofficial-twrp-infinix-hot-s3-x573-t4064705
Skyhuppa said:
Hamenth Jabalpuri my best friend XDA Senior Member
Click to expand...
Click to collapse
Thank you too for sharing this.....
Great tutorial thx
i can't get into edl mode
i used the shorting method via the back cover.. the device was blinking... was detected in device manager but when i clicked on port inside miracle box... nothing happened
i am trying to dump the firmware
Skyhuppa said:
INFINIX HOT S 3 ROOTING PROCEDURE WITH LOCKED BOOTLOADER
Click to expand...
Click to collapse
aus7een said:
i used the shorting method via the back cover.. the device was blinking... was detected in device manager but when i clicked on port inside miracle box... nothing happened
i am trying to dump the firmware
Skyhuppa said:
INFINIX HOT S 3 ROOTING PROCEDURE WITH LOCKED BOOTLOADER
Click to expand...
Click to collapse
I'm not getting your device blinking well but;
1. Make sure your device driver 9008 in edl mode installed well. When you open device manager you must see driver 9008 for your device. Download driver
https://www.allmobitools.com/download/Qualcomm_HS_USB_QDLoader_9008_Driver_Download.zip
2. If you are using windows 10 make sure you disable driver signature before installing any driver on your computer
3. Make sure you disconnect and reconnect battery cable on the board before and after every connection.
4. Use the miracle tutorial when you see driver Qloader 9008 in device manager after connecting device.
5. You must connect the two edl points well. Poor connection boot to battery charge.
6. Use miracle 2.82 version
Click to expand...
Click to collapse
did you have TWRP for infinix hot s3?
Nice well done thanks for sharing
agnitoya said:
did you have TWRP for infinix hot s3?
Click to expand...
Click to collapse
Not yet unless bootloader is fully unlocked.
Flash???
which file should i flash it,becouse i dont have the file... and almost all my frimware have .bak at the end so which flasher i should use,QFIL or others? heres the link of the pic of it
Nthn_Knt said:
which file should i flash it,becouse i dont have the file... and almost all my frimware have .bak at the end so which flasher i should use,QFIL or others? heres the link of the pic of it
Click to expand...
Click to collapse
Where did you get the .bak firmware files? Qfil can't flash such firmware. Use mobilsea tool or emmc tool.
Skyhuppa said:
INFINIX HOT S 3 ROOTING PROCEDURE WITH LOCKED BOOTLOADER
Things You must First Do
1. Install Qualcomm drivers for your PC
2. Learn how to remove the device back cover:
3. Learn how to boot the device to EDL mode :
4. Learn how to backup your device full firmware with a box like miracle box or cracked version :
5. Learn how to flash firmware with QFIL tool version 2.0.1.9 :
PROCEDURE 1
1. Get hold of your device full stock firmware. Some build numbers do not have stock firmware especially my Hot S3 build number do not have correct stock firmware.
2. Install latest official magisk manager apk.
3. Copy stock boot.img to your device internal storage.
4. Launch magisk manager app, select install magisk 18.1v or any version that will appear, there will be an options select patch boot.img. Now locate where you stored your boot.img. After patch magisk will show you the location of the patched bootimg.
5. Copy the patched boot.img into the device firmware folder. Remove the original boot.img from the firmware folder and save it somewhere and rename the patched boot.img to boot.img.
6. Now launch the QFIL tool and flash using the previous procedure.
7. After successful flash, boot to the device recovery (Volume up + power button) wipe partition and factory wipe, then power off and reboot.
8. After reboot update Google play store and services sign into your account successfully to have a recognize certify device. Install magisk manager apk. Launch magisk manager app, update and install any other updates that will pop up. Every installed thing in magisk will show green.
9. Reboot. The device successfully rooted.
NOTE:
1. Those who have their correct official firmware and have tested and working correctly, there will be firehose file, patch0 file, rawprogram0 files, NON-HLOS file. These are the necessary files for the flashing.
2. Those who don't have the correct stock firmware use the backup firmware from the miracle and rename these files as;
boot= boot.img
Cache= cache.img
dummy= dummy.img
misc= misc.img
persist= persist.img
recovery= recovery.img
splash= splash.img
system= system.img
userdata= userdata.img
aboot= emmc_appsboot.mbn
Modem=NON-HLOS bin
The rest of the files add .mbn to it end.
You need:
patch0.xml
rawprogram0.xml
prog_emmc_firehose_8937_ddr.mbn
if you don't have these files I will upload my full prepared stock firmware so that you take all the necessary files from it into yours and flash.
But if you have any downloaded stock HOT S 3 firmware with only one system and vendor inside you can use it.
3. Those who have their stock firmware, if the system and vendor in the folder is in multiple form meaning more than one ( system and vendor are in parts) you can't use QFIL tool to flash, it require different flash tool. Use your backup firmware.
4. If any find things difficult I will upload my stock firmware so that all builds can use to create their own stock firmware.
Thank you.
5. After every flash try to remove battery cable and replace for some seconds when the device cover is opened.
6. At a point where the device refuse to boot or power off, long press power button to power off or reboot.
7. Do not be in haste, take your time to follow all these procedures to avoid the device going dead. Because a device does not go dead in my hands. It may brick but when you use good and required flash files everything will be okay.
With ease, convenience and future developments for the device I have created Facebook group for that because some informations are hard to come by. I have posted a lot of help in different forums, nobody seems to help, so this how far I have gone. Now trying to Port custom recovery like twrp for the device even though bootloader is locked.
Procedure 2
1. Follow procedure 1 to backup device
2. Patch boot.img with magisk manager
3. Copy patched image rename as boot.img into backup folder.
4. Flash only the patched boot.img by any supported tool.
5. Reboot device install magisk manager apk reboot and update magisk done.
Those who have already rooted or gone far with the device can join the facebook group or provide me better links. Thanks
Facebook Group Link: https://www.facebook.com/groups/324251668449205/
CREDITS
Thanks to XDA for creating this wonderful platform
The best App ever magisk
The best tool ever Miracle box
Hamenth Jabalpuri my best friend XDA Senior Member
Thanks to everyone.
CAUTION
If any want to use this information in his site, don't forget to credit XDA.
Click to expand...
Click to collapse
TWRP LINK
https://forum.xda-developers.com/android/development/unofficial-twrp-infinix-hot-s3-x573-t4064705
Please read this guide fully before attempting to follow it. It requires some knowledge of how to use a Terminal and basic ADB/Fastboot operation. I don't think this guide is thorough enough for a person who's modifying their phone for the very first time. Feel free to ask for help though!
I am not reliable for any adverse effects this guide might have on your phone. If something breaks, that's your responsibility. However: if your phone doesn't boot anymore, but you can still get into fastboot, you should be able to flash the Stock Firmware OFP using the Realme Flash Tool. To get into fastboot, power off your phone, wait a few seconds, and hold power and volume down until you see the fastboot logo.
This guide was cobbled together using various other tutorials and my own attempts. I've used it on my RMX2075. It should also work for the RMX2076. The files Realme provides for the RMX2075 are named "RMX2076", so I assume they're the same device. I have no idea how the RMX2071 fits into this. Curiously, the TWRP version used here is intended for the RMX2071, although it works flawlessly on my RMX2075. However: if you're using it on an RMX2075/2076 TWRP thinks you're using an RMX2071, so it won't flash packages intended for the RMX2075/2076. Hence the following warning:
!!! YOU WON'T BE ABLE TO INSTALL OTA UPDATES AFTER INSTALLING TWRP !!!
If you attempt to install an OTA Update downloaded from within the Settings.app, the phone will reboot, TWRP will attempt to install the OTA Update and fail with an error. This does not break anything, it just doesn't update.
DOWNLOADS:
- Realme Flash Tool
- Stock Firmware OFP
- OTA Update OZIP
- TWRP 3.4.1b for RMX2071 by wzsx150 and LR. Team
Spoiler: further details
The licensing of this TWRP is pretty unclear, so I can't provide a download link. If you search for it Online, make sure to find a version that includes both "recovery.img" and "misc.bin"
- Realme DeepTesting App
- Magisk Manager by topjohnwu
- oppo ozip decrypt
PREPARATION:
- install ADB & Fastboot on your computer
- enable "USB debugging" on your phone
- install the oppo ozip decryption tool by following the instruction on the GitHub page
UNLOCKING
- follow the unlock instructions provided by the official Realme Tutorial
RESTORING AND UPDATING - if you're on firmware A42, skip this step
- follow the restore instructions provided by the official Realme Tutorial
- go to the Realme Software Update page, click on "How to update?" and follow the instructions
FLASH TWRP
- open a Terminal window and cd into the folder that holds recovery.img and misc.bin
cd /path/to/folder
- enter the following commands and hit enter after each
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot flash misc misc.bin
fastboot reboot recovery
- your phone should now reboot into TWRP
- enter your phones unlock code if you have one
- go to "Advanced" -> "Disable Replace TWRP"
- reboot phone
ROOTING
DO NOT use "Install Root" in TWRP, it'll "destroy" the bootloader and you'll have to flash the stock firmware
Follow this instead:
- decrypt the OTA .ozip using the oppo ozip decrypt tool (instructions on its GitHub page)
- unzip the resulting decrypted file
- copy "boot.img" onto your phone
- copy "/firmware-update/vbmeta.img" into a folder of your choice
- install Magisk Manager on your phone
- open Magisk Manager, tap on "Install" followed by "Select and Patch a File"
- select the "boot.img" you've previously copied onto your phone and let Magisk do its thing
- the patched "boot.img" is called "magisk_patched_XXXX.img" or something similar. Make note of the resulting file name which is specific to you.
- copy the patched "magisk_patched_XXXX.img" into the same folder that holds your "vbmeta.img"
- open a terminal and cd into the folder that holds the patched "boot.img" and "vbmeta.img"
- enter the following commands and hit enter after each
adb reboot bootloader
in the following step, replace "magisk_patched_XXXX.img" with whatever your patched "boot.img" is called
fastboot flash boot magisk_patched_XXXX.img/ICODE]
[ICODE]fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot
- your phone should now be rooted
I have also uploaded the stock boot.img along with the rooted version as well as vbmeta.img here. They were created using the method described above with OTA update A42. I would recommend creating your own though, since this has a higher chance of success.
Another method to get the stock boot.img and vbmeta.img is creating a TWRP backup, renaming "boot.emmc.win" to "boot.img", and "vbmeta.emmc.win" to "vbmeta.img". I have NOT TESTED this method.
I don't know if this will work for Android 11 / ColorOS 2.0. My theory is that if you can get the RMX2076PU_11.C.16.ozip somewhere, you could just follow this guide using it instead of the A42 one. Again, I have NOT TESTED this method.
Unfortunately does not work with Android 11. The result is that the phone stays in the fastboot. The Realme flash tool doesn't work anymore. The phone is now bricked. Let's see if I can reach the service now. Isn't the first time they haven't answered. Now actually needs the MSM tool. But haven't found a working one yet.
corneo said:
Unfortunately does not work with Android 11. The result is that the phone stays in the fastboot. The Realme flash tool doesn't work anymore. The phone is now bricked. Let's see if I can reach the service now. Isn't the first time they haven't answered. Now actually needs the MSM tool. But haven't found a working one yet.
Click to expand...
Click to collapse
Android 11twrp brush Android 10, and then brush Android 10twrp, you can boot
can u using volte with stock ofp eu version?
Any guide on unlock/rooting Xiaomi Mi Pad 5 Pro from China? I need root access + english. If there is HD Netflix, it would be great.
Go through the regular Xiaomi unlock process (register device, connect to unlocking tool, wait 7 days, unlock). Unlocking will wipe (factory reset) the device. Choose English when setting up the device after unlocking.
Download Magisk and install.
Download Fastboot enuma ROM from Xiaomi. (Fastboot is easier than recovery)
Extract boot image from ROM zipfile.
Copy boot image file to device and use Magisk to patch the file. Copy file back to PC.
Reboot into fastboot. Fastboot flash patched boot image (possibly best to flash A & B, but if something goes wrong then its a long process to recover).
Reboot. Rooted.
There is another thread with details on getting HD Netflix & Amazon working if it does not by default.
Sorry, I have no knowledge of software.
Magisk download from playstore and install on phone?
Any link to download the fastboot enuma rom?
What is Fastboot flash patched boot image? What is A and B?
While everyone must admittedly start from somewhere, I will need to caution you that blindly following instructions from the internet may end up with you having an un-usable device. Having some idea of what the instructions are doing is a far safer option.
Secondly, rooting is not a magical solution for everything, you indicated you *need* root, yet you also seem unfamiliar with Magisk. So are you sure you really need root? Root will not magically make the system native English UI if that is what you were hoping. You would need to use the Chinese ROM in English, or wait until a Global rom is released or 3rd party roms.
Unlocking Xiaomi / Mi devices is well documented you can follow any of those guides.
Once unlocked:
Download Magisk apk from here: https://github.com/topjohnwu/Magisk copy to the device and install.
Download the ROM for your device. Preferably the same version that is already on the device. Also preferably the "fastboot" type. Fastboot type has the individual files you need inside the zipfile, plus this will be a good backup to have in case something goes wrong as the fastboot ROM can be used to re-install.
You can try xiaomirom.com for the rom files, check that the download comes from the official xiaomi site though. "enuma" is the model name for the Pro 5G version.
Unzip the rom file and copy the boot.img file to the device
Open magisk on the device and choose install, select and patch a file, choose the boot.img file.
Copy the patched file back to a PC, reboot the tablet into fastboot mode and connect to the PC
On the PC make sure you have the right drivers installed and the fastboot program (no idea how to do this on windows).
In a command shell window type fastboot flash boot <name of patched file>
Reboot the tablet. Open Magisk and it should say installed and you should have root access
Heard of bricking and unbricking solutions.
I rrequire root access to system files or app files inaccessible normally.
I am ok with China rom as long as most of its UI is in English with Google Playstore.
"Download the rom for your device"? Any website link to do so? Hmmm... I am so confused. Any YouTube videos to show step by step? The first part to signing into xiaomi account to unlock device is ok. But the rooting part sounds so complicated.
Pardon me for my inexperience.
Check in Magisk manager if Mi Pad 5 Pro uses A/B partition. If so, flashing a patched boot.img to both partition is required.
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
I cant this working with 'https://hackmd.io/@EdwardWu/ArrowOS_elish'
can anyone help please?
i'm a sound lover, so i rooted my Samsung to get Viper4AndroidFx working.
I guess that this method is almost universal for Samsung devices, bit i'm not sure about that so be careful with this.
-you will void warranty for your device-
--Root access on the SM-A21F with the newest Firmware(A217FXXU8DVG4) update and Android 12--
if you are new to all of this search for all the things need first.(I used just heimdall for flashing, because JOdin3CASUAL throws error at me because of a corrupted pit file, don't know how to workaround this)
MAKE SURE YOU HAVE THE RIGHT FIRMWARE FOR THE FLASH!!!
Needs:
-Linux Machine for flashing tool Heimdall(try ubuntu studio for sound experience)
sudo apt install heimdall
There is also a frontend(GUI) for this tool:
sudo apt install heimdall-frontend
(install heimdall first, then the frontend)
-samloader Firmware tool(search for instructions to get the right Firmware)
-lz4 compression librarys to decompress the boot.img from stock firmware
-Magisk app(magisk from f-droid works)
-USB debugging allowed and OEM unlock enabled on your Samsung phone(search for developer options to do this and long press vol-up in Download mode)
1. get the firmware with samloader, decode,decompress,rename to ZIP and open the archive.Decompress the AP section, decompress the boot.img.lz4
2.put the boot.img on your phones storage to patch it with Magisk.
3.put the patched boot.img back on your Computer in a new folder and rename it back to it's original name boot.img
-make sure your phone is charged before you flash the image!
4.connect your device in download mode to the Computer(for SM-A217F:turn off the phone, press vol+ and vol- hold it both and connect the USB cable)
5.open a terminal window in the new folder where the patched and renamed boot.img is placed and type sudo heimdall print-pit, it shows the partition table of your device, for --BOOT you can also type the number of the partition as it's shown in the pit file)
sudo heimdall flash --BOOT boot.img
If anything goes wrong you can always flash back the original boot.img from downloaded stock firmware or unroot your device this way.
After this your device is rooted but there is no Twrp custom recovery for ths model yet.
The unofficial release which can be found on xda doesn't work for me. I've flashed it but got stuck in download mode.
Flashing works fine with other rooting tools but there is no way to get rid of the unrooted stock recovery yet.
I cannot guarantee you that this guide won't Brick your phone. Just be careful with the re-partition options in Odin, if you want to use it. All the work can be done with linux, heimdall and magisk.
heimdall print-pit will show the partititition table from your device.
--+no warranties. What works for me must not work for others.
For everyone who wants to root and no method has worked for him, or you have errors, or your device has not booted after the root.
You can follow the following explanation
Firstly, I used sm-a217f/ds phone
The baseband version is A217FXXU8DVG4
And its protection is U8
Android 12
First of all, you must disable the bootloader ... and this is very important so that no errors occur ... and also do a factory reset for your phone. So you should transfer all your important files before that
1- Get your official ROM from any trusted site
2- Decompress the ROM file and it will show you all the ROM files AP - BL - CP - CSC - HOME_CSC
3- Take the AP file and transfer it to your phone
4- Then download the latest version of the Magisk application
5- Then open the application and inject the AP file into it
6- The injection process takes a relatively long time. I think it takes five minutes or less, depending on the size of the AP file
7- After the injection process is complete, you will find the file that was injected with Magisk in the download files
8- Take the injected file and put it into the computer
9- Then open the Odin application and put the file that was injected into the AP box
10- Put all the rest of the files in your ROM file into Odin
11- We cancel the autorun mode from Odin
12- Then press Start
13- After the process is completed, restart the phone and remove the USB cable, and the phone will ask you to do a factory reset again, and press OK
14- Now the phone supports root
15- After unlocking the phone, install the Magisk app again
16- The application will ask you to download an additional component, click OK, and the phone will restart again
17- Now you have a rooted phone that has been linked to the Magisk application
I think this is the easiest explanation of rooting in detail
And good luck to all of you.
hamada2001 said:
For everyone who wants to root and no method has worked for him, or you have errors, or your device has not booted after the root.
You can follow the following explanation
Firstly, I used sm-a217f/ds phone
The baseband version is A217FXXU8DVG4
And its protection is U8
Android 12
First of all, you must disable the bootloader ... and this is very important so that no errors occur ... and also do a factory reset for your phone. So you should transfer all your important files before that
1- Get your official ROM from any trusted site
2- Decompress the ROM file and it will show you all the ROM files AP - BL - CP - CSC - HOME_CSC
3- Take the AP file and transfer it to your phone
4- Then download the latest version of the Magisk application
5- Then open the application and inject the AP file into it
6- The injection process takes a relatively long time. I think it takes five minutes or less, depending on the size of the AP file
7- After the injection process is complete, you will find the file that was injected with Magisk in the download files
8- Take the injected file and put it into the computer
9- Then open the Odin application and put the file that was injected into the AP box
10- Put all the rest of the files in your ROM file into Odin
11- We cancel the autorun mode from Odin
12- Then press Start
13- After the process is completed, restart the phone and remove the USB cable, and the phone will ask you to do a factory reset again, and press OK
14- Now the phone supports root
15- After unlocking the phone, install the Magisk app again
16- The application will ask you to download an additional component, click OK, and the phone will restart again
17- Now you have a rooted phone that has been linked to the Magisk application
I think this is the easiest explanation of rooting in detail
And good luck to all of you.
Click to expand...
Click to collapse
Root achieved with your method, thanks!
Is there any way to remove software installation warning boot message not recognized by samsung and bootloader unlocked message?