I've did it, see One Plus 11 Convert to Oxygen from ColorOS (Both OFP and OTA package A07 Bootloader Lock/PIN working).
In this part: Following is the steps to flash the OFP/EDL Packages
but ACE 2 and 11R haven't init_boot.img and system_dlkm.img,so I skiped.and oplusstanvbk.img is same as Color OS.
Flashing is on ColorOS A.07.I'm not sure A.08 and A.09 can flashing.
The ROM in Stock Firmware + OTA Update Collection.
CPH2487export_11_A.07_2023012100050201.zip
adb reboot bootloader
Click to expand...
Click to collapse
fastboot flash --slot=all modem radio/modem.img
fastboot flash --slot=all boot images/boot.img
fastboot flash vbmeta_system_a images/vbmeta_system.img
fastboot flash vbmeta_system_b images/vbmeta_system.img
fastboot flash vbmeta_a images/vbmeta.img
fastboot flash vbmeta_b images/vbmeta.img
fastboot flash vendor_boot_a images/vendor_boot.img
fastboot flash vendor_boot_b images/vendor_boot.img
fastboot flash vbmeta_vendor_a images/vbmeta_vendor.img
fastboot flash vbmeta_vendor_b images/vbmeta_vendor.img
Click to expand...
Click to collapse
fastboot reboot fastboot
Click to expand...
Click to collapse
fastboot flash --slot=all init_boot images/init_boot.img
fastboot flash --slot=all abl radio/abl.img
fastboot flash --slot=all aop radio/aop.img
fastboot flash --slot=all aop_config radio/aop_config.img
fastboot flash --slot=all bluetooth radio/bluetooth.img
fastboot flash --slot=all cpucp radio/cpucp.img
fastboot flash --slot=all devcfg radio/devcfg.img
fastboot flash --slot=all dsp radio/dsp.img
fastboot flash --slot=all dtbo images/dtbo.img
fastboot flash --slot=all engineering_cdt images/engineering_cdt.img
fastboot flash --slot=all featenabler radio/featenabler.img
fastboot flash --slot=all hyp radio/hyp.img
fastboot flash --slot=all imagefv radio/imagefv.img
fastboot flash --slot=all keymaster radio/keymaster.img
fastboot flash --slot=all oplus_sec radio/oplus_sec.img
fastboot flash --slot=all oplusstanvbk radio/oplusstanvbk.img
fastboot flash --slot=all qupfw radio/qupfw.img
fastboot flash --slot=all recovery images/recovery.img
fastboot flash --slot=all shrm radio/shrm.img
fastboot flash --slot=all splash images/splash.img
fastboot flash --slot=all tz radio/tz.img
fastboot flash --slot=all uefi radio/uefi.img
fastboot flash --slot=all uefisecapp radio/uefisecapp.img
fastboot flash --slot=all xbl radio/xbl.img
fastboot flash --slot=all xbl_ramdump radio/xbl_ramdump.img
fastboot flash --slot=all system images/system.img
fastboot flash --slot=all system_ext images/system_ext.img
fastboot flash --slot=all vendor images/vendor.img
fastboot flash --slot=all product images/product.img
fastboot flash --slot=all my_product images/my_product.img
fastboot flash --slot=all odm images/odm.img
fastboot flash --slot=all my_engineering images/my_engineering.img
fastboot flash --slot=all vendor_dlkm images/vendor_dlkm.img
fastboot flash --slot=all system_dlkm images/system_dlkm.img
Click to expand...
Click to collapse
fastboot flash --slot=all my_stock images/my_stock.img
fastboot flash --slot=all my_preload images/my_preload.img
fastboot flash --slot=all my_heytap images/my_heytap.img
fastboot flash --slot=all my_carrier images/my_carrier.img
fastboot flash --slot=all my_region images/my_region.img
fastboot flash --slot=all my_bigball images/my_bigball.img
fastboot flash --slot=all my_manifest images/my_manifest.img
Click to expand...
Click to collapse
windows may change some command like this:
fastboot flash --slot=all my_stock images/my_stock/my_stock.14161913.img
fastboot flash --slot=all my_preload images/my_preload/my_preload.14218981.img
fastboot flash --slot=all my_heytap images/my_heytap/my_heytap.14132393.img
fastboot flash --slot=all my_carrier images/my_carrier/my_carrier.empty.img
fastboot flash --slot=all my_region images/my_region/my_region.14241105.img
fastboot flash --slot=all my_bigball images/my_bigball/my_bigball.14241585.img
fastboot flash --slot=all my_manifest images/my_manifest/my_manifest.00011011.img
Click to expand...
Click to collapse
Can you leave your contact information? I'll add you. My qq810666038
可可以留下联系方式吗？我来加你。我的qq810666038
Mod. edit: post translated. alecxs
810666038 said:
Can you leave your contact information? I'll add you. My qq810666038
Click to expand...
Click to collapse
added you
加你了
Mod. edit: post translated. alecxs
Sir, is this ace2 machine activated overseas? Mine is locked and I don't know if brushing oxygen will work. Now my phone has been rooted, but I don't quite understand how to refresh your oxygen in this step.
fastboot flash --slot=all my_stock images/my_stock/my_stock.14161913.img I don't know why adb can't recognize this command --slot
大佬这ace2机器是在海外激活的吗？我的被锁了不知道刷氧行不行。现在我手机已经root了但没太看懂您这步骤怎样刷氧。
fastboot flash --slot=all my_stock images/my_stock/my_stock.14161913.img 这种指令我的adb不知道为什么会识别不了--slot
Mod. edit: post translated. alecxs
Sinastxs said:
Sir, is this ace2 machine activated overseas? Mine is locked and I don't know if brushing oxygen will work. Now my phone has been rooted, but I don't quite understand how to refresh your oxygen in this step.
fastboot flash --slot=all my_stock images/my_stock/my_stock.14161913.img I don't know why adb can't recognize this command --slot
Click to expand...
Click to collapse
Upgrade ADB.
升级ADB.
https://dl.google.com/android/repository/platform-tools_r34.0.0-windows.zip?hl=zh-cn
Mod. edit: post translated. alecxs
Sinastxs said:
Sir, is this ace2 machine activated overseas? Mine is locked and I don't know if brushing oxygen will work. Now my phone has been rooted, but I don't quite understand how to refresh your oxygen in this step.
fastboot flash --slot=all my_stock images/my_stock/my_stock.14161913.img I don't know why adb can't recognize this command --slot
Click to expand...
Click to collapse
I also activated it overseas, and it reminded that the call will be restricted, so I called the overseas customer service and sent it to unlock it! Should be back next week!
我也是海外激活的，提示通话即将受限，打电话给海外客服寄过去解锁了！下星期应该就寄回来了！
Mod. edit: post translated. alecxs
支持ota嗎？
Does this method support OTA?
yayor44176 said:
支持ota嗎？
Does this method support OTA?
Click to expand...
Click to collapse
ACE2 is flashed to oxygen OS A.8 via cable, and the model changes to 11R
ACE2通过线刷到oxygen OS A.8，机型变11R
Mod. edit: post translated. alecxs
The meaning is installed oxygen OS A.8 can be upgraded to a later updated version?
意义是裝了oxygen OS A.8能升级到以后更新的版本？
Mod. edit: post translated. alecxs
After the last step "fastboot flash --slot=all my_manifest images/my_manifest/my_manifest.00011011.img", what am I suppose to do ?
I did a reboot and hardbrick my device (black screen, cannot boot to recovery/bootloader/fastboot)
yayor44176 said:
The meaning is installed oxygen OS A.8 can be upgraded to a later updated version?
Click to expand...
Click to collapse
onePlus11 not available
onePlus11 不可
wzwcfei said:
ACE2 is flashed to oxygen OS A.8 via cable, and the model changes to 11R
Click to expand...
Click to collapse
The online guru said that in addition to oneplus 11 brushing oxygen ota upgrade will freeze the interface, there is also a solution on the Internet, ACE2 flashing oxygen OS can ota upgrade.
网上大神说除了oneplus 11 刷oxygen ota升级会卡开界面，网上也也解决办法，ACE2 刷oxygen OS可以ota升级
Mod. edit: post translated. alecxs
jowy_ham said:
After the last step "fastboot flash --slot=all my_manifest images/my_manifest/my_manifest.00011011.img", what am I suppose to do ?
I did a reboot and hardbrick my device (black screen, cannot boot to recovery/bootloader/fastboot)
Click to expand...
Click to collapse
Managed to get it unbricked (paid), but I still wish to flash OxygenOS.
Currently the "recovered" ROM is PHK110domestic_11_A.11_2023xxxxxx.zip
Can I flash CPH2487export_11_A.07 or A.08 ??
wzwcfei said:
The online guru said that in addition to oneplus 11 brushing oxygen ota upgrade will freeze the interface, there is also a solution on the Internet, ACE2 flashing oxygen OS can ota upgrade.
Click to expand...
Click to collapse
Can you listen to where the ota upgrade is, can you send a link? I'm afraid it will be bricked after the update
Are there any other tutorials you would recommend for reference?
可以ota升级在哪里听回来，能发个链接吗？我怕更新后变砖
另外有其他教程推荐做参考吗？
Mod. edit: post translated. alecxs
Bilibili has tutorials
哔哩哔哩有教程的
Mod. edit: post translated. alecxs
Ah ok, found it. Did you flash it here or there?
嗯好的，找到了。你是用這裏還是那裏的方法刷的？
Mod. edit: post translated. alecxs
yayor44176 said:
Ah ok, found it. Did you flash it here or there?
Click to expand...
Click to collapse
Yes, unlock the BL lock, and then watch the video to flash oxygenOS A8
对，解BL锁，然后看视频刷oxygenOS A8
Mod. edit: post translated. alecxs
can netflix widevine l1
You can search drminfo through playstore to view
可以netflix widevine l1吗
可以通过playstore 搜索 drminfo 来查看
Mod. edit: post translated. alecxs
Greetings. As a friendly reminder, we ask all members to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ , https://www.babelfish.com/ or https://fanyi.baidu.com/#auto/en or use one of your choice.
Thank you for your cooperation, and have a pleasant day.
Regards,
alecxs
moderator
Hello does this apply to PHK110?? If yes where is the firmware !
wzwcfei said:
Yes, unlock the BL lock, and then watch the video to flash oxygenOS A8
对，解BL锁，然后看视频刷oxygenOS A8
Mod. edit: post translated. alecxs
Click to expand...
Click to collapse
I have a flickering problem with the video of station B, do you have it too?
我跟了B站的视频有闪屏问题，你也有吗？
Related
Great news!!!
U can download the new ANDROID PIE stock (working on at&t Mexico, Movistar Mexico, Retail, and many others) firmware from here:
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Hit the thx button
Khanov said:
Great news!!!
U can download the new ANDROID PIE stock (working on at&t Mexico, Movistar Mexico, Retail, and many others) firmware from here: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Hit the thx button
Click to expand...
Click to collapse
Work with locked bootloader?
Yeah, totally
TheDemonOfSky said:
Work with locked bootloader?
Click to expand...
Click to collapse
Enviado desde mi motorola one mediante Tapatalk
Khanov said:
Yeah, totally
Enviado desde mi motorola one mediante Tapatalk
Click to expand...
Click to collapse
What's program I can use to flash?
Fastboot vía CMD
TheDemonOfSky said:
What's program I can use to flash?
Click to expand...
Click to collapse
Enviado desde mi motorola one mediante Tapatalk
deleted
little tutorial on flashing this? I know how to use fastboot, used it a bit on my ex addison..
but there are few new files and I wouldn't like to brick a new phone
This is aint working on my Motorola ONE ATT Mx, once it finishes to flash the following message appears "Your device has failed verification" and it wont boot my Variant is XT1941-5, you need to flash back oreo 8.1 stock rom to boot again, a more reliable source is needed or a proper guide
This Work in XT1941-5 ?
Zacknvmnd said:
This Work in XT1941-5 ?
Click to expand...
Click to collapse
I got that one and it doesn't
Darkzide86 said:
I got that one and it doesn't
Click to expand...
Click to collapse
My device die i have brick, u can help me?
Zacknvmnd said:
My device die i have brick, u can help me?
Click to expand...
Click to collapse
I reflashed this one
https://mirrors.lolinet.com/firmware/moto/deen/official/IUSMXLA/
Hello, in Mexico is already coming Android Pie via OTA.
new link, is the brazil version, If you like to flash it
https://mirrors.lolinet.com/firmware/moto/deen/official/RETBR/
Darkzide86 said:
This is aint working on my Motorola ONE ATT Mx, once it finishes to flash the following message appears "Your device has failed verification" and it wont boot my Variant is XT1941-5, you need to flash back oreo 8.1 stock rom to boot again, a more reliable source is needed or a proper guide
Click to expand...
Click to collapse
you managed to start your computer, mine is in paperweight status, all for not waiting for the official update and flashing, help my team is a paperweight: eek:
Zacknvmnd said:
My device die i have brick, u can help me?
Click to expand...
Click to collapse
Pudiste recuperarlo, estoy en la misma problemática que usted, alguien puede ayudarnos ?
Released officially on italian market
Inviato dal mio XT1805 utilizzando Tapatalk
Hi for flash with wipe use this script, i test in my device and all work fine remember use with the last version of binares of fastboot by Google.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
PHP:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash boot_a boot.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot erase userdata
fastboot erase DDR
fastboot flash logo_a logo.bin
fastboot oem fb_mode_clear
fastboot reboot
Seyaru said:
Hi for flash with wipe use this script, i test in my device and all work fine remember use with the last version of binares of fastboot by Google.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
PHP:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash boot_a boot.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot erase userdata
fastboot erase DDR
fastboot flash logo_a logo.bin
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Hi, thanks for the contribution, I'll be coming home, espeor work and upload a screen image of the status of my device.
tell me what version of firmware did you use?
guger10 said:
Hi, thanks for the contribution, I'll be coming home, espeor work and upload a screen image of the status of my device.
tell me what version of firmware did you use?
Click to expand...
Click to collapse
Stock BR Pie
Hi guys,
Did not see anyone here on XDA who uploaded recently leaked OFFICIAL PIE fastboot image ROM for Moto G6 Plus, so I decided to do it for you all. :highfive:
This is a RETAIL release so it should work on all variants of our device (I have XT1926-3 (this is RETEU, Europe, Poland) and flashed it without any problems, phone works flawlessly).
06.03.2019, THE NEWEST PPW29.116-20 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1Axk870qsui9w3TnnRQM9pt618CQ0CnHz
MIRROR: https://mega.nz/#!0ZUyTAqI!XXPwj0mcsGs0wLFwxwX8V0OeFXgCe-NXf-2VbDvr5Nc
OLDER BUILD: PPW29.116-16 FIRMWARE DOWNLOAD (RETAIL) - BE CAREFUL, IT BREAKS SAFETYNET ON EUROPEAN G6+ VARIANTS!
DOWNLOAD: https://drive.google.com/open?id=1F0SFwVyXgy3ZixL36W6xwxjqPJAwiDus
MIRROR: https://mega.nz/#!VJ8xEYRT!rb476WxlV099PVJrLwbFIr1Z3XNjo89sO5MU-HfPzMQ
OLDER BUILD: PPW29.116-11 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1shkeHg_jxsCTLgcDjwcCgecMLJKC4EB0
MIRROR: https://mega.nz/#!MQ8BBYwJ!KpwfgunwBONWlwAYFmFUEt4UsRPpjn34jJo1GHY66fo
Flashing scripts (G6PlusFlashPieOfficial.bat from the attached .zip file can be also used, it contains the same commands as below):
If you are not sure what are you doing, ask here or read fastboot documentation before flashing anything:
--- If you don't want to erase all your phone data, use script from G6PlusFlashPieOfficial_NoErase.zip. This will upgrade your G6+ to Android Pie without erasing data. ---
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
It works, indeed, flawless, though I used the version Vache shared on telegram. I assume it's the same file you used for this tutorial. I think it's important to mention that there are 2 possibilities to update:
1. The way you describe here
2. Use the update file (Blur_Version.29.11.11.evert.retail.en.US.zip) and place in the root of the internal storage. Then check for updates (though I think this only works when coming from a specific build).
Screenshots.
PS. Digital Wellbeing installed via Magisk.
My brother has a Moto G6 Plus (bought in Europe) without root, will he be able to update it without loosing his data?
Thanks in advance guys.
Is it also posible to use this zip, extract it and then use Fastboot to update without losing enything? So like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot reboot
This is normaly how i update my G6 Plus and never expierence problems......
cdfreak said:
Is it also posible to use this zip, extract it and then use Fastboot to update without losing enything? So like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot reboot
This is normaly how i update my G6 Plus and never expierence problems......
Click to expand...
Click to collapse
Exactly like this.
@cyberon these commands are for your brother.
rafikowy said:
Screenshots.
PS. Digital Wellbeing installed via Magisk.
Click to expand...
Click to collapse
So you were able to upgrade without getting the "Verity mode is set to disabled" on the boot screen or having your System Updates disabled due to the unlocked bootloader?
thump said:
So you were able to upgrade without getting the "Verity mode is set to disabled" on the boot screen or having your System Updates disabled due to the unlocked bootloader?
Click to expand...
Click to collapse
"Verity mode is set to disabled" is still present on boot screen - I don't care.
System Updates were disabled at the begining - there was some information about System Integrity. After flashing Magisk 18 this information dissapeared as you noticed.
smitharro said:
It works, indeed, flawless, though I used the version Vache shared on telegram. I assume it's the same file you used for this tutorial. I think it's important to mention that there are 2 possibilities to update:
1. The way you describe here
2. Use the update file (Blur_Version.29.11.11.evert.retail.en.US.zip) and place in the root of the internal storage. Then check for updates (though I think this only works when coming from a specific build).
Click to expand...
Click to collapse
which file i need to do the 2nd method and where can i download it?
rafikowy said:
"Verity mode is set to disabled" is still present on boot screen - I don't care.
System Updates were disabled at the begining - there was some information about System Integrity. After flashing Magisk 18 this information dissapeared as you noticed.
Click to expand...
Click to collapse
Just rechecked and found my System Updates page no longer gives the "system integrity" error either. Still do get the "verity" error, but seems of no concern. Cool.
giorgis91 said:
which file i need to do the 2nd method and where can i download it?
Click to expand...
Click to collapse
This should do the trick. Remember to rename the file to Blur_Version......zip. (see my previous post).
https://mega.nz/#!RRF01QID!9QjfFmaVjWQW6ZAoqqbn-tOW9bCYgnn7IojnSgrHLJU
smitharro said:
This should do the trick. Remember to rename the file to Blur_Version......zip. (see my previous post).
https://mega.nz/#!RRF01QID!9QjfFmaVjWQW6ZAoqqbn-tOW9bCYgnn7IojnSgrHLJU
Click to expand...
Click to collapse
Will it wipe the phone ?
giorgis91 said:
Will it wipe the phone ?
Click to expand...
Click to collapse
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Suggestions
rafikowy said:
Hi guys,
Did not see anyone here on XDA who uploaded recently released OFFICIAL PIE fastboot image ROM for Moto G6 Plus, so I decided to do it for you all. :highfive:
This is a RETAIL release so it should work on all variants of our device (I have XT1926-3 (this is RETEU, Europe, Poland) and flashed it without any problems, phone works flawlessly).
PPW29.116-11 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1shkeHg_jxsCTLgcDjwcCgecMLJKC4EB0
MIRROR: https://mega.nz/#!MQ8BBYwJ!KpwfgunwBONWlwAYFmFUEt4UsRPpjn34jJo1GHY66fo
Flashing scripts (G6PlusFlashPieOfficial.bat from the attached .zip file can be also used, it contains the same commands as below):
If you are not sure what are you doing, ask here or read fastboot documentation before flashing anything:
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin[PHP][/PHP]
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
I place an "m" in front of fastboot to use mfastboot.
Get the mfastbootv2 it's best for flashing this way imo
Good work buddy.
What's the command erase carrier for?
smitharro said:
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Click to expand...
Click to collapse
Is that multilang or only in english?
---------- Post added at 10:01 AM ---------- Previous post was at 09:49 AM ----------
giorgis91 said:
Is that multilang or only in english?
Click to expand...
Click to collapse
smitharro said:
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Click to expand...
Click to collapse
I ask because I'm italian and I see that the file as "en.US" in the name, i tried just now to rename the file but with "it.IT" and the system find it as an update. But i want to know if i can choose the language or it's just in english
giorgis91 said:
Is that multilang or only in english?
---------- Post added at 10:01 AM ---------- Previous post was at 09:49 AM ----------
I ask because I'm italian and I see that the file as "en.US" in the name, i tried just now to rename the file but with "it.IT" and the system find it as an update. But i want to know if i can choose the language or it's just in english
Click to expand...
Click to collapse
All stock ROMs are multilingual. So Italian shouldn't be a problem.
what dos this mane: Verity mode is set to disabled when you boot the phone up?
cdfreak said:
what dos this mane: Verity mode is set to disabled when you boot the phone up?
Click to expand...
Click to collapse
A short explanation:
dm-verity
transparent integrity checking for block devices
read error if block integrity check fails
try to recover damaged blocks (from Android 7.0)
useful for read-only partitions like*system
fundamental part of*verified boot*on Android
Verified boot
device software integrity based on hardware root of trust
Boot chain (simplified)
verify*bootloader*using a hardware root of trust
bootloader*verifies*boot*and*recoverypartition
kernel*verifies*system*partition
uses dm-verity for the integrity checks once execution has moved to the boot partition
Hmmm. For some reason I get "Server error" in play store. And autobrightness jumps up and down every few seconds. Have tried returning to oreo and reflashing/factory resetting to no avail On reteu.
EDIT: Hmm also get the error in oreo now Anyone know whats up? Came from Lineage 16.
OFFICIAL
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
COMMANDS
Code:
#MOTO G5
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
:fingers-crossed:
Hi takoa, thanks for your efforts. What are the differences with the firmware OPP28.85-16?
security update
Is this flashable in any cedric? I have a Moto G5 XT1675 italiani TIM brand (now with pixelexperience)
Any hope for capturing OTA update? I'd prefer to flash delta update instead of factory image
Hi. I’m currently on Android 7, build NPPS25.137-72-4, reteu channel.
I can directly flash this via fastboot to get 8.1? Thanks!
xfahim Hi, of course you can directly flash this firmware to go to 8.1. Greetings
yilhernandez said:
xfahim Hi, of course you can directly flash this firmware to go to 8.1. Greetings
Click to expand...
Click to collapse
Ah so it doesn’t matter which version am I using? I thought I’d need something for the reteu channel. Thanks for the confirmation!
moto g5
hola amigo, donde puedo descarar el firmware: CEDRIC_RETAIL_8.1.0_OPP28.85-19-4-2_cid50 para el moto g5 xt1670
juan raul perez kana said:
hola amigo, donde puedo descarar el firmware: CEDRIC_RETAIL_8.1.0_OPP28.85-19-4-2_cid50 para el moto g5 xt1670
Click to expand...
Click to collapse
Code:
https://mirrors.lolinet.com/firmware/moto/cedric/official/
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
vaibhavsirohi91 said:
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
Click to expand...
Click to collapse
Get the latest firmware from
https://mirrors.lolinet.com/firmware/moto/cedric/official/
Fastboot commands
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Note in order to flash gpt & bootloader the firmware must be the same or newer than what is on your device
If you get a security downgrade error the firmware you are trying to flash is too old
TheFixItMan said:
Get the latest firmware from
https://mirrors.lolinet.com/firmware/moto/cedric/official/
Fastboot commands
Note in order to flash gpt & bootloader the firmware must be the same or newer than what is on your device
If you get a security downgrade error the firmware you are trying to flash is too old
Click to expand...
Click to collapse
Already got the latest one from RETIN folder (India)but still my device stuck into bootloop
vaibhavsirohi91 said:
Already got the latest one from RETIN folder (India)but still my device stuck into bootloop
Click to expand...
Click to collapse
Assuming you got no errors when flashing the firmware & all parts of the firmware were flashed correctly
Did you erase userdata?
You can also go into stock recovery mode and factory reset
Also you can try & remove any sim & sdcards from the device & see if it boots without them
TheFixItMan said:
Assuming you got no errors when flashing the firmware & all parts of the firmware were flashed correctly
Did you erase userdata?
You can also go into stock recovery mode and factory reset
Also you can try & remove any sim & sdcards from the device & see if it boots without them
Click to expand...
Click to collapse
I am getting these errors and i can't even access recovery
vaibhavsirohi91 said:
I am getting these errors and i can't even access recovery
Click to expand...
Click to collapse
Can't see any errors there but you may want to use an older fastboot version
TheFixItMan said:
Can't see any errors there but you may want to use an older fastboot version
Click to expand...
Click to collapse
Logical system not found......and i am using the latest zip from Retin folder (India)
vaibhavsirohi91 said:
Logical system not found......and i am using the latest zip from Retin folder (India)
Click to expand...
Click to collapse
I don't believe that is an error but rather an issue with that version of fastboot
I didn't say use another firmware - just use an older version of fastboot
Try versions from
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Obviously I presume gpt & bootloader flashed successfully
TheFixItMan said:
I don't believe that is an error but rather an issue with that version of fastboot
I didn't say use another firmware - just use an older version of fastboot
Try versions from
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Obviously I presume gpt & bootloader flashed successfully
Click to expand...
Click to collapse
Ok wait let me try
vaibhavsirohi91 said:
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
Click to expand...
Click to collapse
Sorry, but I forgot to indicate that we have to eliminate the "m" from mfastboot.
or rename fastboot.exe to mfastboot.exe :good:
Hey everyone
My motorola one deen xt 1941-4 64GB PVT1 is not starting up
its just giving error Start Up Failed
Its just starting up in bootloader mode with locked oem and AP Fastboot Flash Mode (Secure).
Not going into recovery
not going into factory mode
Can you plz help me out to solve it plz
nashi_jee said:
Hey everyone
My motorola one deen xt 1941-4 64GB PVT1 is not starting up
its just giving error Start Up Failed
Its just starting up in bootloader mode with locked oem and AP Fastboot Flash Mode (Secure).
Not going into recovery
not going into factory mode
Can you plz help me out to solve it plz
Click to expand...
Click to collapse
Are you familiar with flashing moto firmware with fastboot.exe ?
Did it install an update recently?
Sent from my mata using XDA Labs
sd_shadow said:
Are you familiar with flashing moto firmware with fastboot.exe ?
Did it install an update recently?
Click to expand...
Click to collapse
Not much familiar but know some basics.
No it did not install any update.
My wife just powered it off during a call and when tried to turn it on it showed up with the message
I have tried to unlock bootloader but it requires developer option to be turned on.
Simply I can follow the instructions if you provide some.
And thanks for reply buddy
nashi_jee said:
Not much familiar but know some basics.
No it did not install any update.
My wife just powered it off during a call and when tried to turn it on it showed up with the message
I have tried to unlock bootloader but it requires developer option to be turned on.
Simply I can follow the instructions if you provide some.
And thanks for reply buddy
Click to expand...
Click to collapse
I would start with
Motorola smart assistant
It has a recovery option
There's a link in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my mata using XDA Labs
sd_shadow said:
I would start with
Motorola smart assistant
It has a recovery option
There's a link in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Click to expand...
Click to collapse
I have already tried this LMSA. It shows its model in recovery option i.e xt1941-4. But when I try to recover it ends up with MODEL NOT SUPPORTED
Waiting for reply / solution from any expert please.
nashi_jee said:
Waiting for reply / solution from any expert please.
Click to expand...
Click to collapse
You could flash firmware but if you don't flash the correct firmware for the software channel on the device it won't work.
Usually the software channel is the named for the carrier or region.
https://mirrors.lolinet.com/firmware/moto/deen/official/
You can flash the firmware with fastboot.exe
Setting up and Using adb.exe and fastboit.exe https://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
The flashing commands should be
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash logo_a logo.bin
fastboot flash boot_a boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_a system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Another option would be trying to switch a/b system
Hoping that the non active partition is bootable.
Some instructions about that in my adb thread.
Sent from my mata using XDA Labs
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Switching active system partition is the easiest
If the bootloader will even allow the commands
It may not.
Sent from my mata using XDA Labs
Thanx to help me.
But I am confused.
Can you plz help me through team viewer or wonething like that if you dont mind
sd_shadow said:
You could flash firmware but if you don't flash the correct firmware for the software channel on the device it won't work.
Usually the software channel is the named for the carrier or region.
https://mirrors.lolinet.com/firmware/moto/deen/official/
You can flash the firmware with fastboot.exe
Setting up and Using adb.exe and fastboit.exe https://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
The flashing commands should be
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash logo_a logo.bin
fastboot flash boot_a boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_a system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Another option would be trying to switch a/b system
Hoping that the non active partition is bootable.
Some instructions about that in my adb thread.
Sent from my mata using XDA Labs
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Switching active system partition is the easiest
If the bootloader will even allow the commands
It may not.
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
I tried RSD Lite last night and successfully flashed the firmware but the problem still exists.
Everything gone good then why its not back into life?
One more thing I am thinking that the firmware folder does not contain any recovery file. Is it normal?
nashi_jee said:
You could flash firmware but if you don't flash the correct firmware for the software channel on the device it won't work.
Usually the software channel is the named for the carrier or region.
https://mirrors.lolinet.com/firmware/moto/deen/official/
You can flash the firmware with fastboot.exe
Setting up and Using adb.exe and fastboit.exe https://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
The flashing commands should be
I tried RSD Lite last night and successfully flashed the firmware but the problem still exists.
Everything gone good then why its not back into life?
One more thing I am thinking that the firmware folder does not contain any recovery file. Is it normal?
Click to expand...
Click to collapse
Recovery is part of the boot.img now
Sent from my mata using XDA Labs
sd_shadow said:
Recovery is part of the boot.img now
Click to expand...
Click to collapse
It finishes successfully but again comes up with same error
i face same problem you solve that problem or still not?
Same problem
Hey guys. Wait please I'm working for your blank flash for your device . Recently I worked two models before . Check this coming soon I'll add your model.
https://forum.xda-developers.com/one-vision/how-to/start-failed-motorola-one-macro-t4082275/amp/
still No luck mate.
yehison said:
Hey guys. Wait please I'm working for your blank flash for your device . Recently I worked two models before . Check this coming soon I'll add your model.
https://forum.xda-developers.com/one-vision/how-to/start-failed-motorola-one-macro-t4082275/amp/
Click to expand...
Click to collapse
Should I try this method for Motorola XT1941-4?
Download this Firmware -> https://mega.nz/file/JRFUwbpY#gsn5SmaPBpND5Vfredrm5sFJx6tWzegS67v2YDYvfjA
Put Firmware Files in your platform tools folder
CMD into the platform tools directory (if you don't know what that means,. then you are a NOOB LOL)
type
Fastboot devices
output: phone detected ? yes then proceed if no then you need to fix that
copy and paste all this in fastboot
fastboot flash --disable-verity --disable-verification vbmeta_system vbmeta_system.img
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash --disable-verity --disable-verification vbmeta_vendor vbmeta_vendor.img
fastboot flash metadata metadata.img
fastboot flash userdata userdata.img
fastboot flash engineering_cdt engineering_cdt.img
fastboot flash bluetooth bluetooth.img
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash core_nhlos core_nhlos.bin
fastboot flash featenabler featenabler.mbn
fastboot flash vendor_boot vendor_boot.img
fastboot flash splash splash.img
fastboot flash oplus_sec oplus_sec.mbn
fastboot flash apdp apdp.mbn
fastboot flash toolsfv tools.fv
fastboot flash logfs logfs_ufs_8mb.bin
fastboot flash storsec storsec.mbn
fastboot flash oplusreserve2 oplusreserve2.img
then type fastboot reboot.
be patient
or if its bootlooping let me know.
i dont have a cph variant.
these commands above where tested in Gn2200
Theatrically it should still work for CPH
NOTES: I FIND IT Odd THAT THIS METHOD DEBRICKED my DEVICE to a success boot to HOMESCREEN without having too flash the critical PARTION NOR THE SUPER
I have the decrypted .ofp file. It doesn't give product.img, system.img, odm.img, and a couple others and everytime I unpack it, it corrupts some of the .img files. It also gives three supers. If you can get all of the raw files without corruption and post them, I'd be grateful.
TweakybirdsTheWord said:
I have the decrypted .ofp file. It doesn't give product.img, system.img, odm.img, and a couple others and everytime I unpack it, it corrupts some of the .img files. It also gives three supers. If you can get all of the raw files without corruption and post them, I'd be grateful.
Click to expand...
Click to collapse
Ya all those files are in the super.img . You gotta use simg2img to merge the parted supers then unpack that super
Well then. I'll, uh...I'll try that very simple sounding idea. My old college professor is laughing at me.
Decrypting the ofp takes like 20 minutes
Have you the merged super.img? I haven't had a chance to do it yet.
TweakybirdsTheWord said:
Have you the merged super.img? I haven't had a chance to do it yet.
Click to expand...
Click to collapse
redacted
How to use this
killerex said:
How to use this
Click to expand...
Click to collapse
redacted
I have one plus Nord n20 5g version is this compatible
killerex said:
I have one plus Nord n20 5g version is this compatible
Click to expand...
Click to collapse
Do you have the Gn2200 or the chp variant?
Chp
killerex said:
Chp
Click to expand...
Click to collapse
Then it should be compatible. . Is your device bricked and bootloader unlocked?
The guide wont be ready tonight maybe tomorrow.
Yes
redacted
bricklife4me said:
What was the lastest update you did to phone and how did you brick your phone.?
Click to expand...
Click to collapse
Latest update..I was trying to root it..I guess flashed wrong boot.img
killerex said:
Latest update..I was trying to root it..I guess flashed wrong boot.img
Click to expand...
Click to collapse
redacted
bricklife4me said:
here are the commands to flash in fast boot d
fastboot flash devcfg_a devcfg.mbn
fastboot flash devcfg_b devcfg.mbn
fastboot flash dsp_a adspso.bin
fastboot flash dsp_b adspso.bin
fastboot flash bluetooth_a BTFM.bin
fastboot flash bluetooth_b BTFM.bin
fastboot flash modem_a NON-HLOS.bin
fastboot flash modem_b NON-HLOS.bin
fastboot flash pmic_a pmic.elf
fastboot flash pmic_b pmic.elf
fastboot flash rpm_a rpm.mbn
fastboot flash rpm_b rpm.mbn
fastboot flash splash splash.img
fastboot flash tz_a tz.mbn
fastboot flash tz_b tz.mbn
fastboot flash xbl_a xbl.elf
fastboot flash xbl_b xbl.elf
fastboot flash abl_a abl.elf
fastboot flash abl_b abl.elf
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash super super.img
fastboot flash vendor_a vendor.img
fastboot flash vendor_b vendor.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot erase userdata
to get to fastboot you have to adb the below command
adb reboot fastboot
Click to expand...
Click to collapse
How can I flash all this command in one flash?
bricklife4me said:
Did you pull your own boot image?
Click to expand...
Click to collapse
No I got from telegram.
killerex said:
No I got from telegram.
Click to expand...
Click to collapse
Lol probably from my Channel