Where can I find the firmware files?
I have seen this article: https://romprovider.com/unlock-bootloader-root-oneplus-11r/
I have this "CPH2487export_11_A.07_2023012100050201.zip" from the above link
My device version says : CPH2487_11_A.08
it shared a link to firmware but did mention that the Version in the device should be the same as the version downloaded.
Has anyone performed Magisk root on 11R?
1.first you need to extract the payload.bin from CPH2487export_11_A.07_2023012100050201.zip.
2.Use tools to extract boot.img from payload.bin.
3.Use the magisk app to patch the extracted boot.img
4.Install the patched img by magisk app.
5. Reboot your phone.
It`s done now.
loading800 said:
1.first you need to extract the payload.bin from CPH2487export_11_A.07_2023012100050201.zip.
2.Use tools to extract boot.img from payload.bin.
3.Use the magisk app to patch the extracted boot.img
4.Install the patched img by magisk app.
5. Reboot your phone.
It`s done now.
Click to expand...
Click to collapse
Hi thank you for the reply. But issue is that my current rom is CPH2487_11_A.08 and i didn't find OxygenOS firmware for CPH2487_11_A.08. There is a thread with ColorOS firmware
OnePlus 11R CPH2487 Firmware Flash File (Stock ROM) - ROM-Provider
download OnePlus 11R CPH2487 Firmware flash file stock rom, the file can be used to fix frp, pattern, bootloop & software issue on OnePlus 11R
romprovider.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does after rooting and unlocking, it looses L1 widewine certificate which is responsible for playing HD videos on Netflix?
Right now, I am using oneplus 7t and unlocking bootloader cause to loose L1.
I am thinking about buying this bad boy.
Related
stock rom is not flashed by twrp why ???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my phone is also not flashed from mi flash tool i think partition problem occuring can you help me any one
Wrong ROM
________________________
Sent from my phone using Tapatalk
help me out my 3s is not going on stock rom
download working rom for your device from here
as per Your Device If MTK/China Then download china rom/Fastboot
If Global then download Global Stable rom /Fastboot
Also Download Mi Flash Beta Tool
After Download Extract It to ur pc
Again open extracted file with Win Rar or change file ext to zip/rar
for extraxting again
after extracting two time you will find Imaages folder
Select images folder In mi Flash Beta Tool
Conect Your device In EDL Mode with PC
Press refresh Button on Tool
You will find Port showing in tool
Press flash
wait 3 mins
Now you are on stock rom
i can post links but my account not allowed to me
nihal_kumawat17 said:
stock rom is not flashed by twrp why ???
my phone is also not flashed from mi flash tool i think partition problem occuring can you help me any one
Click to expand...
Click to collapse
I'm not sure what you're trying to flash and what your actual device is, but you can't flash MIUI on regular TWRP.
Sent from my Redmi 3 using XDA Labs
Hello!
I encountered a problem with tv box X96 Max 4/32. I bought a tv box in July in a store VONTAR. The tv box came in a new revision, all old firmwares are not install and not work on it . If the firmware passes the installation, the TV box turns into a brick, and you need to close the contacts to flash another firmware. My tv box works on only one stock firmware X96Max_V311_20190625, but Bluetooth doesn't work on it.
On new revisions tv box have firmware X96Max_V31R_20190716_2201, can anyone get it for flash via UBT (img format).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please link firmware X96Max_V31R_20190716_2201
no longer needed. made without backup firmware for this revision
hi all, think i've same model
can't do anthing with it
burning tool not work and twrp recovery not working too
really bad i've removed my root with mmagisk installation
if i can have help i've original recovery if it needed thx all
z300muser said:
hi all, think i've same model
can't do anthing with it
burning tool not work and twrp recovery not working too
really bad i've removed my root with mmagisk installation
if i can have help i've original recovery if it needed thx all
Click to expand...
Click to collapse
i've found a valid twrp here
if i can have help for recover my root please i think it's possible if i replace the file in system
but i've "su" and "daemonsu" extracted maybe i need too put their in system/xbin but no work's i was tried
twrp have make me a valid backup of system i can restore it but i was made it after try magisk installer
Hey guys,
i'm trying to setup my Mi 10 to spoof Pokemon Go and I've unlocked the phone with XiaoMiTool V2 V20.7.28 (beta) but whenever i try to install TWRP now using the "Mods, root and twrp" i get this error message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can someone help me please?
I couldn't find a complete Step-by-Step Guide yet to do it any other way.
you want to root your device?
open fastboot go to fastboot folder on your computer and open command promt
use this command "fastboot flash recovery your_twrp.img"
vol up + power to open twrp
flash magisk.zip
So i should not use XiaoMiTool V2?
My plan was to put TWRP on it and then use the smali patcher.
Which is the right version of TWRP for the Xiaomi Mi 10?
N0sferat0 said:
So i should not use XiaoMiTool V2?
My plan was to put TWRP on it and then use the smali patcher.
Which is the right version of TWRP for the Xiaomi Mi 10?
Click to expand...
Click to collapse
https://mifirm.net/model/umi.ttt
Thank you
So this one?:
TWRP-3.4.2B-0623-XIAOMI10-CN-wzsx150-fastboot.zip
Even though that it seems to be for the chinese version and is unofficial?
This procedure is so different compared to my LG G4 and Galaxy S8.
What is meant with Fastboot folder on my PC - the unpacked .zip that contains the .img of TWRP?
Hi there,
I want tot root my A3 with the above Build, but i can't find this Build anywhere in the Net. Does anybody have this ore at last the boot.img ?
thank you
You will find all boot.img here both magisk patched and stock.
And all stock firmware versions can be found here, if you experience any issues you can always revert to stock
Thank you, but this Build can't be found behind you're links.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you are on a10. so: install twrp and flash magisk via recovery! download magisk23.apk. rename to magisk23.zip. enter in twrp. enter in adb sidelod mode. conbet phone to pc. open terminal into adb folder. type adb sidelod magisk23.zip. reboot. u can find this full guide in official magisk website
But to install TWRP, I need the Stockrom boot.img
ok, give me more detail... what rom have on your phone???? is not stock???? you don't need boot img for install twrp. into the guide section you can find the procedure step by step. simply install twrp.img via fastboot, and after enter into twrp and flash twrp installer
You can see my build in the Screenshot above. It was automaticly installed during a restart. Its Stock Android One.
I prefer to have the Stockrom boot.img just in case somthing ugly happens (what happens to often).
Hi, so i got a simple tablet, Multilaser M7S Lite, and i want to root it, my main goal is to be able to edit System folder, i want to change the boot animation, mainly.
So , since there is no TWRP recovery for this brand, i decided that the only way, was with magisk patching boot.img. So i found my deivce firmware - https://www.stockrom.net/2021/04/multilaser-m7s-lite-so06-v7-20200509-8-1oreo.htmland download the .img file. So to extract the boot.img, i need to change it to .zip file and open. But when opening it it says the following:
And using 7-zip, it only extract this files :
What can i do?
The firmware-package file you linked to is a .RAR-formatted archive.
When you unpack this .RAR-file then you can see a ML***USER.img is housed therein what is tablet's Stock ROM.
To unpack this .IMG-file you may use sim2img provided here:
[DEV][Tools] simg2img for Windows
Hello, although I'm working in Linux (VM too) I rewrote the SIMG2IMG so far for Windows (PE32, x86) Usage: simg2img.exe -i -o Optional: -d for debugging messages, listing all chunks of the image...
forum.xda-developers.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Running sim2img, it says bad magic.
It's the full firmware but is it an allwinner or a rockchip or... These tabs can be like whatever. Check that first then google how to extract etc.
I found this: https://forum.xda-developers.com/t/...images-unpacker-packer.1753473/#post-28329544
SOO i manage to unpack it!!
Which file i use in magisk to patch?? boot.fex?
yep.