Android 11 - Tap To Check Phone - Not Working With Tempered Glass Screen Protector - Android Q&A, Help & Troubleshooting

I purchased and installed the below screen protector for the Google Pixel 4 XL that is running Android 11 and noticed that the tap to check phone no longer seems to work. I tried turning on "Increase touch sensitivity" as well as turning the tap to check feature on and off with rebooting but nothing has worked.
Anyone have any suggestions? Perhaps there is a mod with Root that can be done to change the thresholds for sensitivity on lock screen or the ambient light sensor?
Supershieldz Designed for Google Pixel 4 XL/Pixel 4XL Tempered Glass Screen
https://imgur.com/MvSBkcG

Related

Ecoo e04 aurora plus mtk6752 3gb

I have the above rooted phone with official rom Android 5.0 and I would like to know if exists a way to disable magnet reed switch to turn off flip cover function that locks/unlocks the phone that display a clock for some seconds after screen lock. I tried XDA magnetoff, flip cover, auto screen on/off, sensor disabler ecc. without success. Is there a way to disable magnet cover lock screen without replace it with a new one without magnetic component?
Thanks

Tap Screen for Always-On Display

I've read spotty reviews on how the ambient screen display feature works (as-in it didn't reliably) so I initially disabled it. I installed Nougat DP5 last night and re-enabled it just to see if it's any better. I've found that if I double tap the screen it comes on. Now, I don't think this is like the LG version where it's detecting your finger touching the screen but more like the accelerometer detects the vibration and interprets this as the motion needed to trip the display. I've noticed that it's not very reliable, or doesn't work at all, except on the right-side more or less inline with where the time is displayed. Double-tap here and it works very time (maybe the accelerometer is under that spot). Who knows. What I do know is that I can now check the time without having to press the power button.
I've noticed this as well - I'm on dp5, and I have the double tap 6p app installed. It doesn't seem to work as well, but the ambient display seems to trigger more when I touch the device.
On stock all you need to do is tap it hard enough to slightly move the phone and ambient display will work.

Double tap to wake screen up

I want to add ( double tap to wake screen up) to my device c5 ultra dual, there are alot of app on google play but the screen still work with black wallpaper and drain battery , otherwise i found app (night screen) that can reduce screen light without root or, i think programmers can make an app to lock screen and turn off screen light but screen still working and when click on screen light work again

only half of the touch screen working

I had a cracked screen on my Xiaomi Mi A2 Lite before and I bought the component to fix it myself, (replacing the screen using service just cost too much in UK, I can almost buy another brand new phone) however the lower half of the screen does not work.
Is there any app that use to make my screen smaller so that I can actually use the usable section of the screen only please?
There is a app Screen Resizer (itdo.at.screenresizer) but i never tested it. But you can enable rotation for lockscreen and launcher, and for soft buttons you can install Auto Hide Softkeys (com.gmd.hidesoftkeys)

"Imperfect" Ambient Display Behavior

So before upgrading to the Nord N105G I had a OnePlus 6T, which was a very reliable phone. I had it since launch, and I got very used to the behavior of the ambient display.
I didn't have any of those new-fangled features enabled like Smart Lock or Face Unlock, but I did use the fingerprint scanner but that's neither here nor there.
The display behavior I expect is that a single-tap will turn on the display (from completely off) to the black ambient display with the clock on it. Double tap to wake works just fine, but single tap does not.
Also possibly related: On the 6T I could use quick gestures to launch the flashlight etc from either a display-off state or the ambient display. However, on the Nord, quick gestures do not work on the ambient display - they can only be triggered when the display is fully off. Is anyone else experiencing these issues?
Also, I'm curious. If I use Titanium Backup (rooted) to back up the old Ambient Display app from the OP6T and then restore it to the new phone I wonder if they'd play nice. Might fiddle a bit...
No.
This isn't the same phone by a long shot and the display is one of those big changes.
Ambient display and it's features are limited to oled (and derivatives) screens.
At most, you'd be lucky if the app even registers.
ninjasinabag said:
No.
This isn't the same phone by a long shot and the display is one of those big changes.
Ambient display and it's features are limited to oled (and derivatives) screens.
At most, you'd be lucky if the app even registers.
Click to expand...
Click to collapse
I totally get what you're saying, and you seem knowledgeable, so you're likely right. However, other than the quirks I've described the Ambient display works exactly the same as it did on the OP6T.
For example, Plus Beat still works even though it hasn't been supported since shortly after the release of the 6t. It was designed for an OLED display as a replacement for a standard notification LED (Lighting up a few pixels on an OLED screen IS essentially a notification LED). Plus Beat will wake the N105G's ambient display and display the exact same notification info; obviously its lighting up the entire display to do this, but whatever foundation was originally laid to wake the ambient display doesn't seem to have changed.
So, when I find the time to flash the newest TWRP and make a backup, I will fiddle with it anyway, because contrary to your statement, I think the OP6T ambient display app will replace the N105G's app just fine. Whether the native Android settings will hook into it functionally or not is a whole different beast.
Ambient Display is useless for IPS screens. I use Glimpse Notifications, it normally turns on the screen and a bunch of settings
Alexey71 said:
Ambient Display is useless for IPS screens. I use Glimpse Notifications, it normally turns on the screen and a bunch of settings
Click to expand...
Click to collapse
I don't understand why you'd prefer lighting the lock screen with Glimpse Notifications when Plus Beat still functions as a notification LED (with info) on the black background ambient display. It's not true black obviously because it's not an OLED display, but it's pretty close.

Categories

Resources