Poco F1 stuck on boot - Xiaomi Poco F1 Questions & Answers

Hey everyone,
Hope there are still people around in the F1 forum.
My F1 was sitting in the drawer for almost 2 years now.
I'm trying to boot it now, but it gets stuck in the process. It basically keeps going like this to infinity, i gave it hours and it's doing exactly the same thing.
As you can hopefully see in the video, when i try going to fastboot (by pressing power+volume down buttons) it shows the fastboot logo but gets stuck there.
From that point the only thing i can do is try to reboot normally again, which brings me back to the first state.
Connecting to the computer doesn't do anything.
Any ideas?
Ideally i'd like to keep the data but i'd consider anything at this point.
Many thanks!

Try to restore. Press volume up and power button when logo appear release power button but keep holding volume up until recovery has shown up

deojames said:
Try to restore. Press volume up and power button when logo appear release power button but keep holding volume up until recovery has shown up
Click to expand...
Click to collapse
Thanks for the tip!
Actually, emptying the battery completely and then charging all the way to 100% (without trying to reboot before it reaches 100%) eventually did the trick and the phone turned on with all the data.

Related

Atrix boot loop

I got an Atrix from a friend who was having problems with it.
I tried turning it on and it stays tuck in a boot loop with the "Dual Core Technology" screen.
I tried a couple of key combinations to see if I could get to fastboot but nothing works. So far I've tried the following combinations:
1. holding the volume up button while powering on
2. holding the volume down button while powering on
3. holding volume up + volume down while putting the battery in and then pressing the power button
4. holding volume up + volume down while putting the battery in and then letting go of volume down and pressing the power button
5. holding power and volume up button while putting the battery in
I also tried this. After holding down the volume up button and pressing the power button, i tried hitting the volume down button once and then hitting volume up, hitting it twice and then volume up, 3 times and volume up, etc. etc. and then plugging in the phone to the computer, just in case the fastboot menu was there but I couldn't see it, but that doesn't seem to work either.
As it stands right now, all I'm getting is the boot loop. The phone had been sitting around for a while so I'm not really sure what the history is so all I have to go off of is what I have in front of me.
I'd appreciate any help in the matter.
Can you tell more history of the phone?
Is it rooted?
Is the bootloader unlocked?
Which ROM is it running if it's running one?
Sent from my SGSIII with the XDA Premium App
Bruce Lee said:
Can you tell more history of the phone?
Is it rooted?
Is the bootloader unlocked?
Which ROM is it running if it's running one?
Sent from my SGSIII with the XDA Premium App
Click to expand...
Click to collapse
I'm pretty sure its not rooted and almost certain its the stock rom but I have no idea about the bootloader. My friend is not very tech-savy so I'm guessing that the bootloader is locked.
I have no way to verify any of this. All I have at this point is the phone that sits looping at the "dual core technology" screen.
If you have any ideas about which way to proceed from here, I'd greatly appreciate it!
What exactly is happening (down to the last detail) when you boot while holding Vol(-)?
ravilov said:
What exactly is happening (down to the last detail) when you boot while holding Vol(-)?
Click to expand...
Click to collapse
When I have the volume down button pressed while booting, the green led stays on for 4-5 seconds, then the phone boots to the dual core screen, it'll stay there for about 5-7 seconds, then go to the M logo with the ripples and then the screen goes black for a second and then it loops back to the dual core screen. Only, this time, there is no delay between the 'dual core technology' screen and the M logo with the ripples.
Try this:
1) Remove battery
2) Replace battery while holding volume down button
3) Navigate to recovery
Should get you out of the loop.
aerohp said:
I got an Atrix from a friend who was having problems with it.
I tried turning it on and it stays tuck in a boot loop with the "Dual Core Technology" screen.
I tried a couple of key combinations to see if I could get to fastboot but nothing works. So far I've tried the following combinations:
1. holding the volume up button while powering on
2. holding the volume down button while powering on
3. holding volume up + volume down while putting the battery in and then pressing the power button
4. holding volume up + volume down while putting the battery in and then letting go of volume down and pressing the power button
5. holding power and volume up button while putting the battery in
I also tried this. After holding down the volume up button and pressing the power button, i tried hitting the volume down button once and then hitting volume up, hitting it twice and then volume up, 3 times and volume up, etc. etc. and then plugging in the phone to the computer, just in case the fastboot menu was there but I couldn't see it, but that doesn't seem to work either.
As it stands right now, all I'm getting is the boot loop. The phone had been sitting around for a while so I'm not really sure what the history is so all I have to go off of is what I have in front of me.
I'd appreciate any help in the matter.
Click to expand...
Click to collapse
Maybe the easiest way to get make it work again would be to flash the original stock rom with RSDLite.
It's very easy, you just need to connect your phone via fastboot ( when powering on hold vol(-) key until it says fastboot), then press vol(+) and the computer will detect it.
Just remember to flash the correcto sbf for your phone, otherwise you will have another bootloop.
joelorona said:
Maybe the easiest way to get make it work again would be to flash the original stock rom with RSDLite.
It's very easy, you just need to connect your phone via fastboot ( when powering on hold vol(-) key until it says fastboot), then press vol(+) and the computer will detect it.
Just remember to flash the correcto sbf for your phone, otherwise you will have another bootloop.
Click to expand...
Click to collapse
Where do I get the stock rom?
How about you do some searching on your own for a change?
This time search for fruitcakes. That's the stock ROM.

Phone bricked without ROOT

Hey guys wondering if anyone experienced the phone being basically bricked without actually unlocking, rooting or anything.
It has happened before one, just laying on the table and the phone turning off but it came back on after a while.
Today it occurred again but has not turned back on for two days. When charging the only light is the LED flashing constantly every second. If I hold the power button and volume up then the flashing of the LED changes pace to One long flash (1 sec) to two quicker flashing ones (.5 seconds). If I unplug it and plug the phone back, The LED flashing is back to the original constant pace.
When unplugged sometimes holding the power and volume up button initiates the LG logo and then turns off and then shows the logo once more and then turns off for good.
If I plug this into the computer, its like someone ejecting a usb and plugging it in like a maniac. I heard the connecting and disconnecting sounds from windows nonstop like as if its about to blow up.
I've tried holding the power button for a minute the same goes with different combinations with the volume buttons.
The only thing I haven't tried is opening the phone, kind of afraid I will mess it up. Any solutions?
djrish said:
Hey guys wondering if anyone experienced the phone being basically bricked without actually unlocking, rooting or anything.
It has happened before one, just laying on the table and the phone turning off but it came back on after a while.
Today it occurred again but has not turned back on for two days. When charging the only light is the LED flashing constantly every second. If I hold the power button and volume up then the flashing of the LED changes pace to One long flash (1 sec) to two quicker flashing ones (.5 seconds). If I unplug it and plug the phone back, The LED flashing is back to the original constant pace.
When unplugged sometimes holding the power and volume up button initiates the LG logo and then turns off and then shows the logo once more and then turns off for good.
If I plug this into the computer, its like someone ejecting a usb and plugging it in like a maniac. I heard the connecting and disconnecting sounds from windows nonstop like as if its about to blow up.
I've tried holding the power button for a minute the same goes with different combinations with the volume buttons.
The only thing I haven't tried is opening the phone, kind of afraid I will mess it up. Any solutions?
Click to expand...
Click to collapse
Never heard of this but I can throw a few suggestions out. Try unplugging, then holding both Volume buttons and the power button (All three) for about 10 seconds. Try different USB ports.
Try this if all else fails: Source: http://cellphoneforums.net/lg/t348484-perform-master-hard-reset-lg-optimus-g.html#axzz2YPtvkfDk
To Perform a Master Reset via Hardware
1. Turn off your device.
2. With the device turned off, press and hold the Volume Down key as well as the Home key at the same time.
3. While both the Volume Down key and the Home key are held down, press the Power button.
4. When the LG logo appears, release all the keys.
5. Scroll to and highlight wipe data/factory reset by pressing the Volume Down key. Then press the Power button.
6. Scroll to and highlight Yes – delete all user data by pressing the Volume Down key. Then press the Power button.
7. As soon as the wipe has been completed, press the Volume Down key to scroll to and select wipe cache partition. Press the Power button when ready.
8. As soon as the wipe has been completed, press the Power button to select reboot system now.
9. The master reset should now be successfully completed and your LG Optimus G should restart.
Tried three buttons, nothing yet..As for the hard reset the home button is touch screen so not sure if it would would for this device
djrish said:
Tried three buttons, nothing yet..As for the hard reset the home button is touch screen so not sure if it would would for this device
Click to expand...
Click to collapse
What is your computer reading it as?
Sent from my LG-E970 using xda app-developers app
I have no idea, when I plugged it in and check device manager, its constantly refreshing as its connecting and disconnecting the phone very fast. Is there another way to check
djrish said:
I have no idea, when I plugged it in and check device manager, its constantly refreshing as its connecting and disconnecting the phone very fast. Is there another way to check
Click to expand...
Click to collapse
Anyways, doesnt matter guys thanks for trying, decided to just go in att and buy a samsung s4

[Q] S3 keeps restart itself

i got s3, suddenly it started to reboot itself all the time, what i see is only the samsung logo and then black, and samsung again.
the funny thing is that when i put the battery in, it automaticly start with this loop.
during the loop, when i press home+volume up, i can see the cwm screen for two seconds, and then it reboot again.
if i press home+voulume down, i see the warning in the stock recovery, but when i press volume up, nothing changed, and eventually after two seconds it reboots again.
i tried to connect it to my pc, but it dosen't show it in device manager, and have no indication that i connected it.
also, when i connect it the charger, i see circle, and then a battery for a brief second, and then the circle again.
is it simple hardware problem (stuck power button? even though it seem okay, but it may explain the automatic turn on), or half SDS?
anyway, are there any recommondations? i have'nt flashed it recently or anything like it.
kkffiirr said:
i got s3, suddenly it started to reboot itself all the time, what i see is only the samsung logo and then black, and samsung again.
the funny thing is that when i put the battery in, it automaticly start with this loop.
during the loop, when i press home+volume up, i can see the cwm screen for two seconds, and then it reboot again.
if i press home+voulume down, i see the warning in the stock recovery, but when i press volume up, nothing changed, and eventually after two seconds it reboots again.
i tried to connect it to my pc, but it dosen't show it in device manager, and have no indication that i connected it.
also, when i connect it the charger, i see circle, and then a battery for a brief second, and then the circle again.
is it simple hardware problem (stuck power button? even though it seem okay, but it may explain the automatic turn on), or half SDS?
anyway, are there any recommondations? i have'nt flashed it recently or anything like it.
Click to expand...
Click to collapse
can you enter recovery mode?(yes= factory reset). can you enter download mode?(what does it say under product name?)
sriram231092 said:
can you enter recovery mode?(yes= factory reset). can you enter download mode?(what does it say under product name?)
Click to expand...
Click to collapse
as i wrote before, i can enter to both recovery modes (volume up or volume down) for something like two seconds, i can't do anything in it.
if i try to get to download mode (home and volume down) i see the warning, but either i press volume up or down, it reset itself.
kkffiirr said:
as i wrote before, i can enter to both recovery modes (volume up or volume down) for something like two seconds, i can't do anything in it.
if i try to get to download mode (home and volume down) i see the warning, but either i press volume up or down, it reset itself.
Click to expand...
Click to collapse
what is the warning you see?
sriram231092 said:
what is the warning you see?
Click to expand...
Click to collapse
the regular, about flashing custom roms, if i want to continue press volume up, restart, volume down.
either way, it restarts.
any way it is the power button stuck in 1 mode?
If phone starts on battery insertion, before you push the button then yes, power button is shorted out.
kkffiirr said:
i got s3, suddenly it started to reboot itself all the time, what i see is only the samsung logo and then black, and samsung again.
the funny thing is that when i put the battery in, it automaticly start with this loop.
during the loop, when i press home+volume up, i can see the cwm screen for two seconds, and then it reboot again.
if i press home+voulume down, i see the warning in the stock recovery, but when i press volume up, nothing changed, and eventually after two seconds it reboots again.
i tried to connect it to my pc, but it dosen't show it in device manager, and have no indication that i connected it.
also, when i connect it the charger, i see circle, and then a battery for a brief second, and then the circle again.
is it simple hardware problem (stuck power button? even though it seem okay, but it may explain the automatic turn on), or half SDS?
anyway, are there any recommondations? i have'nt flashed it recently or anything like it.
Click to expand...
Click to collapse
Try leaving the battery out overnight/long time, it helped when I got my phone stuck in a bootloop. But that was due to oc/uv...did you try something risky, causing it to bootloop?
no, it was in regular use, nothing risky.
yesterday i dissassembled it and checked with multimeter, it seem that the power button shorting the circuit, so i ordered a new one, going to be a surgical operation...
Hi everybody,
3 months with this pb, i try all things in the internet:
finaly i found the sol;
after installation OMEGA v50.1 all things ok, no restarts!
http://forum.xda-developers.com/show...77&postcount=4
can you please post the full thread URL? I have the same problem, and I need to send my phone back to T-Mobile, trying to save the pictures/videos!
same problem ! Any soluttion?
darsov said:
same problem ! Any soluttion?
Click to expand...
Click to collapse
Problem solved just replace old power button and no problem! cost me less than 10 Euro

[Solved] 5.1.1 OTA and stuck in bootloop cant access fastboot

So I had the OTA update for 5.1.1 the other day and thought "yay, let's update." it worked fine till this evening where it crashed to a power off state and in now showing the Google logo like it's about to load up and then a turned off screen.
This repeats over and over I can't even stop this loop.
Holding the power button and it just continues to loop.
Power + ANY volume button and it will show the HBOOT or fastboot menu then before I can select anything turn to the powered off state and loop through (if I'm still holding the buttons the menu will show again shortly, or go back to the Google logo)
Any ideas for a solution?
try waiting until the battery drains all the way down then hold the volume down button and plug it in. if that doesn't work then all you can do is contact google support and they'll probably replace or fix it.
Hold the power button down for 20 seconds 3 times. It helped me once with a similar situation
So I have found a solution. Instead of deleting the thread I'll leave this here unless anyone else has this problem.
It seems that trying to enter the fastboot menu when plugged into a USB seemed to work.
It was either the fact it was in the computer, the timing I pressed the "power button + power down" combo, or it had just looped enough times and decided to actually stop interrupting me using the fastboot menu.
Either way, I cleared the cache partition using the recovery and it booted up fine.
EDIT: Thanks for the help, I had tried holding the combo for a long period of time (multiple loops of the booting). I also feared letting it drain in case it refused to startup again and I would have no chance of fixing it.
glad you figured that out! android can be mysterious sometimes. especially when it's on the nexus 9.

Turn off without screen

Hi
Crushed my screen and need to shut down the phone. Anyone know what to do?
Screen is currently not working at all, just showing some blue spots.
Pushing the power button for 10-15 seconds just make the phone restart.
I have also tried to shut down with various modes of Volume +/- while pushing power button, no luck.
Anyone have an idea here?
Appreciate anything.
Thanks.
eiriksen said:
Hi
Crushed my screen and need to shut down the phone. Anyone know what to do?
Screen is currently not working at all, just showing some blue spots.
Pushing the power button for 10-15 seconds just make the phone restart.
I have also tried to shut down with various modes of Volume +/- while pushing power button, no luck.
Anyone have an idea here?
Appreciate anything.
Thanks.
Click to expand...
Click to collapse
If you can get adb running you could always run (in cmd prompt) :
adb shell shutdown
ante0 said:
If you can get adb running you could always run (in cmd prompt) :
adb shell shutdown
Click to expand...
Click to collapse
Not possible, the screen is completely inactive.
Need to find the "button" to push for 20 seconds so it gets turned off, not restarted as it does now.
eiriksen said:
Not possible, the screen is completely inactive.
Need to find the "button" to push for 20 seconds so it gets turned off, not restarted as it does now.
Click to expand...
Click to collapse
Ok. When booted, plug in usb from computer.
Hold power and volume up until phone vibrates, release Power button.
Keep holding volume up for about 20 seconds (this should be a lot faster with bootloader locked) then release volume up.
Wait for another 10 seconds to be safe.
(If you hear it connecting to computer it's not actually done booting to eRecovery yet)
Now, click on Volume down twice, then power. Device should now shut down.
ante0 said:
Ok. When booted, plug in usb from computer.
Hold power and volume up until phone vibrates, release Power button.
Keep holding volume up for about 20 seconds (this should be a lot faster with bootloader locked) then release volume up.
Wait for another 10 seconds to be safe.
(If you hear it connecting to computer it's not actually done booting to eRecovery yet)
Now, click on Volume down twice, then power. Device should now shut down.
Click to expand...
Click to collapse
Excellent, thanks.
This seems to have worked, are no more blue spots left on the screen, so believe it to be shut down.
God lørdag fra Oslo
just wait until the battery dies
ante0 said:
Ok. When booted, plug in usb from computer.
Hold power and volume up until phone vibrates, release Power button.
Keep holding volume up for about 20 seconds (this should be a lot faster with bootloader locked) then release volume up.
Wait for another 10 seconds to be safe.
(If you hear it connecting to computer it's not actually done booting to eRecovery yet)
Now, click on Volume down twice, then power. Device should now shut down.
Click to expand...
Click to collapse
I had to press the volume down three times to reach the power off option
SlimShady1972 said:
I had to press the volume down three times to reach the power off option
Click to expand...
Click to collapse
It depends on android version. Pie has a new entry in eRecovery

Categories

Resources