Related
hi, i'm a newbie and i just wanna share on how to root the xperia sola through flashtool,(THANKS TO BIN4RY AND ANDROXYDE FOR THE GREAT APP THEY HAVE MADE!!!) i've been rooting my android maybe around 4 days trying different ways but still not rooted. I've tried the bin4ry runme.bat file but no success.i just figured out that you must first unlocked your bootloader in order to root it..so here it is for those like me who are so eager and desperate in rooting their xperia sola android phones..
DISCLAIMER: I WILL NOT HELD RESPONSIBLE FOR ANY DATA LOST OR BRICK OF YOUR ANDROID. PROCEED ON YOUR OWN RISK!!
THIS GUIDE IS FOR UNLOCKED BOOTLOADER
BEFORE PROCEEDING.YOU MUST BACKUP ALL YOUR FILES AND SAVE TO YOUR COMPUTER AND REMOVE YOUR EXTERNAL MEMORY CARD AND SIMCARD FOR YOU WILL LOSE ALL YOUR DATA AND FILES WHEN YOU ROOT YOUR ANDROID. YOU CAN ALSO BACKUP YOU FILES AND EVERYTHING USING PC COMPANION
BACKUP ALSO YOUR CURRENT FIRMWARE OR DOWNLOAD THE FTF FILE OF GINGERBREAD AND FLASH IT TO SWITCH BACK TO GB
BACKUP ALSO YOUR TA http://forum.xda-developers.com/showthread.php?t=2292598
HOW TO UNLOCKED YOUR BOOTLOADER:
http://unlockbootloader.sonymobile.com/instructions
OR
HOW TO UNLOCKED YOUR BOOTLOADER USING FLASHTOOL:
1. In your device, open the dialler and enter *#*#7378423#*#* to access the service menu.
2. In your device, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
3. On your computer, click Continue at the bottom of this page to start the unlock boot loader process.
4. Read through the information in the pop up window and click Yes, I’m sure, if you are still confident you want to unlock the boot loader.
Read through and accept the legal terms. Click I Accept.
Enter your name, a valid email adress and the first 14 digits of your device’s IMEI or MEID or IDID number (remove the last digit if necessary). Click Submit. You can view the IMEI or MEID number by entering *#06# on your device. If you have a tablet, click here to learn how to find your IMEI, MEID or IDID number.
The unlock boot boot loader key will be sent to your email. Save it for later use.
Now open your Flashtool(note: you must close the pc companion when it starts to show up because in some cases it slows down you Flashtool)
1. Turn on your phone, and connect with usb debugging on.
2. In you Flashtool go to Plugins-> Bootloader Unlock option, start it.
3. Now it will ask to disconnect your phone and reboot in FLASHMODE.
4. Again reboot your phone in FASTBOOT mode.
5. It will show a window with your IMEI number, insert your unlock key(the unlock that was sent to you in your email) and click "unlock".
6. The device will reboot and you are done!
*(your device must be turned off) hold the volume - before connecting it to your computer through usb (FLASHMODE) green light on led if you've done it correctly
*(your device must be turned off) hold the volume + before connecting it to your computer through usb (FASTBOOTMODE) blue light on led if you've done it correctly
credits to sid.8491 http://forum.xda-developers.com/showthread.php?t=1971363 ...sorry for copy-pasting your procedures..
TO RELOCKED YOUR BOOTLOADER http://forum.xda-developers.com/showthread.php?t=2332900 but i haven't tried it yet
PREPARATIONS:
1. download Flashtool by Bin4ry&Androxyde http://androxyde.github.io/
2. install the right drivers for your phone http://forum.xda-developers.com/showthread.php?t=1413293 -follow the procedures
PREPARATIONS FOR GINGERBREAD(.184)
1. your android must be manually updated to ics through Flashtool (LOCKED BOOTLOADER/UNLOCKED BOOTLOADER) http://androidlegend.com/update-son...cial-android-4-0-4-ics-firmware-6-1-1-b-1-54/
NOW THAT YOUR ANDROID IS ON ICS ROOT IT USING FLASHTOOL ( note: if your android is already on ics skip PREPARATIONS FOR GINGERBREAD(.184) of course )
1. Download this two kernels http://rapidgator.net/file/76795117/kernel.zip.html https://www.dropbox.com/s/8bj491lzhssrn20/kernel.zip or this link http://forum.xda-developers.com/showthread.php?t=2029756
2. Place the two Kernels into where your Flashtool folder in your computer (ex. C:\Flashtool\firmwares\(put the kernels here)
3. Tick usb debugging on ( Developer options > USB debugging ) and unknown sources ( Security > Unknown sources ) in your device
4. turn off your device
5. open the flashtool
6. click the Flash (bolt icon) and choose flashmode and select the 6.1.1.B.10 kernel and click ok
7. wait and when asked to connect your device, connect it by doing flashmode (volume - then connect it to your computer)
8. wait until it finishes.
9. unplug the device and turn it on
10. connect it again to the computer (device turned on) and wait till the root icon is clickable in your Flashtool
11. click the Root icon when available and choose superuser
12. wait until it finished and say that your device is rooted
13. unplug it again and turn it off
14. click again the Flash (bolt icon)and choose flashmode and select 6.1.1.B.54 kernel and click ok
15. wait and when asked to connect your device, connect it by doing flashmode (volume - then connect it to your computer)
16. wait till it finished and unplug your device and turn it on
17. enjoy!
*note : if in the first run you have the rooting unsuccessful or something. restart your computer. restart your device and Flash it again with the ics ftf file (PREPARATIONS FOR GINGERBREAD(.184) ) and repeat step 3.
*note : you must close the pc companion when doing the flashing and rooting
*your device must be flashed(6.1.1.B.10 kernel) in order to root it.
THANKS TO BIN4RY AND ANDROXYDE AND ALL THE PEOPLE THAT I HAVE USED LINKS TO THEIR THREADS!!
RECOGNITION ONLY TO THOSE PEOPLE AND NOT ME.
.i admire u made a very useful first post never seen anyone publishing a guide in his first post..great going..
thanks! i hope i can help those people who are just like me....it took me 4 days to figure out how to root my phone ..hehe
June 02, 2015
Edit: If anyone has a link to the stock ROM for the Ascend G7, please let me know. I would love to make a custom ROM that doesn't take up 98% of all resources 99% of the time.
Hello everyone.
Before I get started, here is everything you need to know about this post.
- This root works as of June 29, 2015
- This is a rooting process for the Huawei Ascend G7
- I did not make this, so please consider supporting all mentioned sources
- I am a new user to XDA, but I've been developing for over a decade. I will regularly check this post if enough people who view it have questions
There are two parts to this process.
First, we unlock the bootloader
Second, we flash a recovery, and subsequently, SU (root)
Let's get started. This will take at least 16 hours. User interaction 5 minutes, and about a 16 hour wait for an email response from Huawei.
Also, I have a new account, so I cannot post links. So please bear with me. I will upload photos in as best order as I can.
Before we get started, please note that your phone will factory reset in this process.
First thing's first. The Ascend G7 requires an unlocked bootloader, before any root can take place. This is obviously temporary, until someone finds a circumvention. But for now, this is how this needs to be done.
Send an email to [email protected], with this format:
Dear Sir/Madam
Please may I request the bootloader unlock code for my Huawei Ascend G7?
Here are some Details:
Serial Number: (Found under Settings --> About phone --> Status)
IMEI: (Found under Settings --> About phone --> Status)
Baseband version: (Found under Settings --> About phone)
Please could you send me the code directly, as I cannot access the product ID on my device.
Thank You
Your name
This part is important. Sometimes, they do not even reply to your email(s). It is recommended - nay, required - for you to put "URGENT" in the subject field of the email. Something along the lines of "URGENT Request Bootloader Unlock Code." It would also be best if you mark your email as urgent/high priority, as well.
Meanwhile, while you wait for the email from them with your unlock code, (expect it to arrive the day after), download the Android SDK and the Java JDK, if you haven't already. What you need most are the SDK tools, which you can also download by typing in "SDK tools android" in Google and finding a download for the stand-alone tools.
Make sure Android Studio is updated, if you already have it. To make sure you have everything you need, open up command prompt in platform-tools, by holding shift and right clicking somewhere on the white, in the folder, (explained in attached picture).
Then, plug in your phone. Make sure USB debugging is enabled. To do so, go to Settings --> About phone --> Tap "Build Number" 7 times in a row. Then go back, and you will see "Developer options." Click on that, and enable USB debugging. Also, this optional, but I like to enable the "Stay Awake" function.
Make sure to accept any prompts that your phone will ask.
Then, go to the command prompt and type in "adb devices" without the quotations.
If you've done everything correctly so far, you should see something similar to the attached command prompt image file.
If everything checks out, let's proceed. If not, post below, and I, or fellow XDA users, will help you out.
Proceed to type in, "adb reboot bootloader" without the quotations, into the command prompt window that you opened. Your Ascend G7 should reboot into fastboot, where you will see something like the attached picture below, of the bootloader screen.
Except, it will say Phone Locked instead of Phone Unlocked.
Now, go back to your command line, and type in "fastboot reboot," to have access to your phone and its functions, while you wait for the email from Huawei.
`````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````
Everything below this line should be done AFTER receiving a reply email from Huawei, with your unlock code.
Now, download the "PHILZ-TOUCH-6.rar" file. I cannot attach it here because it exceed file size limit. No virus, no surveys, here's the link, https/goo.gl/sxPv7I. Just add a colon and a forward slash after https. It is not a virus, in case your firewall or antivirus software brings up red flags. I will post the whole ZIP that I've downloaded from another website. There's a bunch of redundant elements in the folder, but just in case you know what you're doing and might need the tools, I'll keep them there. But all you will need are 2 things from the folder. They're mentioned next.
Go to where you extracted PHILZ to, and hold shift and right click and open a command window in that directory, and type in "adb devices" one more time to make sure your device is listed and connected. Then, type in "adb reboot bootloader," give it a second, and then when fastboot loads up, type in,
fastboot oem unlock 123456789123
Replace "123456789123" with the unlock code provided to you from the Huawei email. Give it a second, and then you should be good. It should now say "Phone Unlocked" in red. Now, type
"fastboot reboot"
in the command line (that was opened in the PHILZ folder), without quotations. Then type,
adb reboot bootloader, one more time, and then,
Navigate to the PHILZ folder, and run "install-windows.bat" as administrator, if using Windows.
If using Linux, run "Install-Linux.sh," and if using a Mac, run "Install-Max.sh"
Now, in CMD type,
fastboot boot recovery.img
Then, again type in
fastboot reboot
Your phone will reboot.
`````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````
Aaaaaaand that's it! You should now be rooted. I recommend going to play store, and downloading a Root Checker to ascertain root access.
The last picture, where it says I have root access now, is a program called Root Genius. It's a one click tool to root any android device - obviously except the Ascend G7, (knowing my luck). But it does work as a root checker as well, if you want to ascertain root access. You can also download Root Checker from the play store; works more or less the same way.
Any questions, feel free to ask. Re-reading this, I could see if the instructions bring confusion to some. I will be glad to clarify any questions.
Works
Root confirmed G7-L01
some point that I did not understood
dear wertywhy,
your guide is really well done, but there are some points not clear to me
1) open up command prompt in platform-tools
what is platform-tools? A specific folder? I was not able to find it
2) if I open the command prompt from any forlder using the shift+right button as you said and then write adb devices I get this message:
'adb' is not recognized as in internal or external command operable progrma or batch file. What should I do?
3) when I connect the phone by usb cable, should I do something more (like enabling device file manager, pc suite or other options) or just connect it in charge only mode?
thank you for your time!
and... by the way, I'm really impressed that I got the anwer from Huawei with the code, that's really cool! Thank you!!
---------- Post added at 04:09 PM ---------- Previous post was at 03:19 PM ----------
I found the platform-tools folder, now if I type adb devices from a prompt open from that folder I don't get the error message anymore, but I get nothing, just the flashing prompt line (the huawei phone is on and usb connected to pc)
dear wertywhy,
your guide is really well done, but there are some points not clear to me
1) I had to install hi-suite to let the command adb work (before that adb was not finding the phone)
2) the file names of adb inside PHILZ_TOUCH is adb-windows and fastboot is fastboot-windows
3) when I input the command adb-windows devices inside the prompt inside the PHILZ folder the result is device offline, I could unlock the phone running the command from platform-tools directory (phone is unlocked now) but I can't run the command to root the phone until I have this "device offline"
Point 1 and 2 are not problem, just something that happened to me, but point 3 is stopping me, any idea how to solve point 3?
Frankleoni said:
3) when I input the command adb-windows devices inside the prompt inside the PHILZ folder the result is device offline, I could unlock the phone running the command from platform-tools directory (phone is unlocked now) but I can't run the command to root the phone until I have this "device offline"?
Click to expand...
Click to collapse
I'm having the same problem. I tried toggling usb debugging off and back on, tried another usb port and another PC (WIN 7 and 8) but none of that helped.
<device offline>
Frankleoni said:
dear wertywhy,
your guide is really well done, but there are some points not clear to me
1) I had to install hi-suite to let the command adb work (before that adb was not finding the phone)
2) the file names of adb inside PHILZ_TOUCH is adb-windows and fastboot is fastboot-windows
3) when I input the command adb-windows devices inside the prompt inside the PHILZ folder the result is device offline, I could unlock the phone running the command from platform-tools directory (phone is unlocked now) but I can't run the command to root the phone until I have this "device offline"
Point 1 and 2 are not problem, just something that happened to me, but point 3 is stopping me, any idea how to solve point 3?
Click to expand...
Click to collapse
Hi Frank,
Let's troubleshoot,
If it lists your device as offline, open up cmd (Run --> cmd), and type in,
taskkill /f /im adb.exe
Then, restart your G7; when it boots up, turn off and then on USB debugging, then find PHILZ, and retry point 3. If device is still offline, please let me know. The issue sounds like it's within the phone, not within ADB.
Alternatively, if that doesn't work, please delete PHILZ off your computer, and wherever it says "PHILZ" in my guide, replace it with the attached folder, (attached with this reply).
Cheers
PS, please make sure to check that your phone is not only in USB debugging mode, but that you've approved/allowed your computer access to your phone, (a prompt will show up on the Ascend G7 that asks you whether or not you trust your PC). And also make sure your phone isn't just set to "charge" when plugged in - activate/select MTP when you connect your phone to computer.
<device offline>
lume12 said:
I'm having the same problem. I tried toggling usb debugging off and back on, tried another usb port and another PC (WIN 7 and 8) but none of that helped.
Click to expand...
Click to collapse
Please refer to my reply to Frankleoni below.
Thank you for replying chy_vak,
I tried your solution in both the PHILZ folder and the new folder you attached. The device shows offline in both of them. However in the build-tools folder it shows online. The command line taskkill /f /im adb.exe terminated adb but the device still shows offline. I did everything in the exact order you wrote.
offline
search Kings Root via Google Chrome, install it and run it Easy and without chat with Huawei support
Kingroot Works like a charm !
@chy_vak, Thank you for your Work. 1st Part works great. 2nd Part went wrong, i dunno why i`ve tried every thing. I hate this Kingroot think, don`t touch it you never will leave it.
I have connect my G7 because unlock works. When i use CMD from Adb Tool it is connected, when i use command prompt from Philz he cant see and find the mobile?? Something for you absolute clearly, isn`t for other. Sry cant do screenshot with notebook and Win 10. have fun
Another Working Method to Root Huawei Ascend G7-L01/L03
Greetings!
I got an Ascend G7 Recently and I needed to Root it as soon as I got it. That's why I kind of broke my head looking for the current methods to do it. I found this one very promising so I started working. I followed the steps that were given to us one by one. Everything was alright until I tried to install the Windos-Installer.bat as administrator, I tried to many ways to this method work, but as much as I tried, I couldn't go with it, that's why I started working for 11 hours until I got it. This Worked for me, and I want to share it with you.
Please read the following notes before you start by rooting your device:
-As usually, do it at your own risk, I'm not responsable of any brick, or issue that damaged your device.
-This Method is working great on Windows 10
-This Method is working at 04/08/2015
-This Method, was tried by me, the directions I give to you, are based on my work by rooting my device and my experience, the software and files included were made and posted by someone else including the person who wrote this post: http://forum.xda-developers.com/gen...-confirmed-t3125621/post61122491#post61122491
-You can find screenshots of the procedure below
-You will need a microSD
-I strongly recommend you to have at least 80% of battery to avoid risks of bricks
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Here begins the directions:
1.- As has been said, you will need to unlock your device bootloader in order to root your phone. So as they said, you will need to write an email to Huawei. The mail you will send should look like this:
To: [email protected],
[email protected]
Subject: (URGENT) Unlock Bootloader
Model: Huawei G7-L03/L01 (Depends on your version)
Serial Number: (The one that comes in your Huawei's box)
IMEI: (You can get it on your box or in the info included on Configuration->About the phone->State
Product ID: (You can get it by typing on the Dial the next code: *#*#1357946#*#*)
I appreciate your concern of reading this. Waiting for a response.
Sincerely: (Your name)
After a while (Could take between 15 minutes and 16 hours depending on their time) A Huawei worker will answer you something like this:
Dear Customer,
Thank you for supporting Huawei device. My working number is ****. Your unlock code :************** , please keeping your unlock code properly.Thank you!
Huawei Terminal Company limited
1.1.- (OPTIONAL) As we are going to unlock the bootloader, we are going to make a factory reset, so I strongly recomend you to make a backup with the official huawei backup app in order to restore our settings, apps, and files.
1.2.- Once Again, as has been said, you will need to download the whole Android suite (Android Studio) the last version, update your java version, and download the last drivers for your device (A good way to do the last is by installing the HiSuite of Huawei).
1.3.- You need to activate the debug mode. You can find it in: Configuration->Developer Options->USB Debug (If you dont have the Developer options enabled, you have to go to Configuration->About the phone->Compilation And tap this last one 7 times)
2.- Download the .rar a the end of the page and extract it where you want, includes everything we are going to need. [You must put the file ''superuser.zip'' on your microSD (In the root of the microSD)]. After Downloading it, you must open a cmd window, running it as administrator. After that you will write:
cd (Here you should paste the ubication of your extracted File Ex: C:\Users\Josh\Downloads\Root Ascend G7)
Now you are in this ubication that includes adb. Write:
adb devices
You should see: List of devices attached, a code and the word device (There is a capture below). If you do, we can proceed.
3.- Type :
adb reboot bootloader
It should load a white page with the Android pet and the words FASTBOOT&RESCUE MODE Below there is the phrase ''PHONE LOCKED'' in color. Now type:
fastboot oem unlock *********** (The code Huawei gave to you)
Now your phone will make a factory reset. You will see how it reboots by itself and back to the default settings. You will need to activate the debug USB mode again. By this point its supposed your bootloader is now unlocked, to probe it, we will type again:
adb devices (To check it is correctly plugged)
Then we will type:
adb reboot bootloader
And now at the end of the page it should say: ''PHONE UNLOCKED''. If you do, we can proceed.
4.- At this point, you have two options: You can replace your stock recovery mode by a ClockWorkMod Recovery (I strongly recomend you to do that) or you can just ROOT the phone whithout replacing your stock recovery.
If you decided by replacing your stock recovery follow the next directions: We still have our CMD window opened and running adb while the phone it is on the bootloader mode. So now what you have to do it's to type:
fastboot flash recovery recoveryP.img (CMD will work and show a few commands)
And after that type:
fastboot reboot
Your phone will reboot again normally and we can proceed.
If you decided not to replace your stock recovery instead of typing ''fastboot flash recovery recoveryP.img'' you have to type:
fastboot boot recoveryP.img (This will send you directly to CWM recovery)
5.- You must acces to CWM Recovery.
If you installed it on your phone, turn off your device and then press the power button and vol+ until the Huawei logo appears, you should be in the recovery mode by now.
If you didn't install it, you already are in CWM recovery.
6.- With the vol and power buttons or the touch buttons at the end you should be able to navigate on the recovery. We go to:
Advanced Functions->Re-root System (SuperSu)->Yes-Apply SuperSu (You will see a few code at the end of the screen)
7.- Without leaving the recovery mode, go to the main screen and now we go to:
Install Zip->Choose zip from /sdcard->superuser.zip (The one that you previously putted on your microSD)->Yes-Install superuser.zip
(You will see again a few code at the end of the page) We go back to the main screen and Select:
Reboot System now
8.- It's supposed we are ROOT now. At first you will see the ''superuser'' app installed. To probe that works, Install ''android-terminal-emulator-1-0-70-multi-android.apk'' that it is included on the folder ''Terminal'' form the file you downloaded. Now open a new terminal window and type
su (If everything worked, superuser will ask for permissions)
8.1.- Restore your data with the Huawei Backup App
And that is all we have superuser acces now. If you have any question or issue let me know and I will help you.
https://mega.co.nz/#!Al9FxDBY!QHkljnnIbjURX01A59tJPNkAVQd3LbKTqRJHD_nNxrs
Thank you!
Cant boot into recovery
Hey guys so i tried following this procedure but it never works :/ if i flash the custom recovery and try boot into it, the phone directly goes to fastboot and rescue mood so cant boot into recovery, not even the stock recovery. if i try directly booting into the custom recovery it says dtb not found :/ can someone please help me?
the model is G7-L11 and the bootloader is unlocked
Engineer Mode Huawei Ascend G7 L03
Huawei Ascend G7 L03
Hi,
I have tried every thing to go into Engineer Mode.... Even Mobile Uncle Does not do that!
Please some one Help....
Huawei Ascend G7 L03
thanks for the translated philz touch
Hello everyone, I have a big problem with a Huawei G7. I did Philz Touch and Root. How can I go back to stock rom?
I've emailed Huawei 3 times now, left a week in between emails, and still haven't received my unlock code. Has anyone else had this issue?
Thanks
1.- As has been said, you will need to unlock your device bootloader in order to root your phone. So as they said, you will need to write an email to Huawei. The mail you will send should look like this:
To: [email protected],
[email protected]
Subject: (URGENT) Unlock Bootloader
Model: Huawei G7-L03/L01 (Depends on your version)
Serial Number: (The one that comes in your Huawei's box)
IMEI: (You can get it on your box or in the info included on Configuration->About the phone->State
Product ID: (You can get it by typing on the Dial the next code: *#*#1357946#*#*)
I appreciate your concern of reading this. Waiting for a response.
Sincerely: (Your name)
Does anyone have a good tutorial on how to flash twrp on the phone ? I've tried different things but it never works
any other method exept this email method? they wont answer me.
http://forum.xda-developers.com/m4-aqua
I have just successfully completed all 3 steps in the title and would like to compile the information so that more people can report more success. Many thanks and all credit to the threadstarter of this guide, the devs of the amazing Flashtool, and the dev of this newly created TOUCH version of the TWRP recovery (finally!)
Code:
DISCLAIMER:
[B]Your warranty is now void. [/B][U]DO THIS AT YOUR OWN RISK.[/U]
I am not responsible for bricked devices, bootloops, dead SD cards, thermonuclear war,
or you getting fired because the alarm app failed.
Please do some research if you have any concerns about any of the steps in this guide before performing them!
YOU are choosing to make these modifications,
please own your actions and don't be a baby about it.
Bootloader Unlock (instructions taken from this guide)
0. First check if your phone allows unlocking by dialing *#*#7378423#*#* , when Service Menu opens, go to Service Info, then Configuration; scroll down to read Rooting Status.
If "Bootloader unlocked" says yes, skip to the next section on Root.
If it says no (unlocked allowed), great, proceed on to next step.
If it says no (unlocked disallowed) or something like that, I'm sorry, unlocking won't work on your phone. Lodge a complaint with your mobile provider for locking it.
Getting the unlock code (skip to Step 5 if you already have it)
1. Go to Sony's official bootloader unlocking website.
2. Select Xperia M or M2 in the dropdown.
3. Follow all the steps (including *#06# to note your phone's IMEI number)
4. COPY the unlock code and paste and save it in a text file on your desktop.
Ensuring Flashtool recognises phone
5. Download Flashtool here and install it.
(To apply the 0.9.19.10 patch, install 0.9.19.8 and replace x10flasher.jar with the one from the patch. Default install folder is C:\Flashtool , don't change it)
6. Open Flashtool, connect your phone via USB. (Make sure USB Debugging is enabled in Developer Options). If Flashtool warns that ADB driver is not installed, go to the Sony website to download them. If Flashtool recognises phone, skip to Step 11.
7. Unzip the Sony drivers into a folder.
8. Boot into Advanced Startup on Windows and disable signed driver enforcement (I'm sorry, you have to Google this for your specific Windows installation)
9. When Windows has restarted, go to Device Manager, click on the ADB Interface item with the yellow questionmark, click Update Drivers, Search Manually, Have Disk, and then open the folder where the Sony driver inf is. select the ADB inf and install it. Warnings will pop up but install the drivers anyway. When done, the yellow questionmark will be replaced by something normal.
10. Verify that Flashtool recognises phone by connecting the USB cable when phone is on. You should see information about phone kernel and ROM version.
<Congratulations for making it this far>
Setting up Flashtool for use
11. With Flashtool open and phone connected, click on Devices in Flashtool menu > Check Drivers.
12. More information will pop up. Under ADB Devices, your phone's serial number will be stated (something like 10 digits and letters). Copy that serial number.
13. Go to %USERPROFILE%\.flashTool\mydevices .
14. Create a new folder in here and rename it to the serial number.
15. Open the serial number folder, create a new text file and rename it "ulcode.txt" (without the quotes).
16. Open the text file, paste your bootloader unlock code, save and close the file.
For step 16, as a precaution, copy and paste the serial number folder inside registeredDevices too. I didn't test which folder was being used by Flashtool for the unlock.
Actual unlocking of bootloader
17. With Flashtool open and phone connected, click on the BLU button. Follow all instructions. One involves VOL UP, the other involves VOL DOWN (for fastboot), please take note to do both, it's not deja vu.
18. When you have done so correctly, Flashtool will pop a small dialog with your IMEI and unlock code already pasted inside.
19. Take a deep breath and click unlock.
20. Check in main window that bootloader has indeed been unlocked.
21. Unplug the USB cable and boot your phone to check that everything should be normal.
CONGRATULATIONS, YOUR WARRANTY IS NOW VOID. :laugh:
Installing TWRP recovery (with touch capability but NO external SD card mount yet as of 13 Nov 2015)
0. Make sure your bootloader is unlocked before proceeding.
1. The download link is from the M4 Aqua Marshmallow Site, scroll to the bottom. (XDA thread is here)
2. Download and save the recovery.img file anywhere you like.
3. Copy and paste recovery.img to C:\Flashtool\x10flasher_lib .
4. Install the recovery using fastboot using the instructions based on this website (thanks and credits to Shyam Karnani):
Flashtool comes with its own ADB interface so we don't need to install any new ones or the bloated Android SDK.
a) Open a command window inside the folder C:\Flashtool\x10flasher_lib (shift-rightclick and select "open command window here")
b) Connect phone to the computer using the USB cable.
c) type "adb reboot bootloader" (without quotes) in the command window and press enter (if asked to allow USB debugging in the phone screen, touch ok)
d) when the phone has entered fastboot, type "fastboot flash recovery recovery.img" (without quotes) and enter. Check that there are no errors produced by the flashing.
e) type "fastboot reboot" and enter.
The phone now has TWRP recovery but NO ROOT.
To boot into recovery
1. Simultaneously press the Power button and Volume down until your device vibrates.
2. Quickly release the Power button, but keep pressing Volume down.
3. When you see the TWRP screen, release Volume down. You have now successfully entered recovery mode.
(Instructions from Sony Developer website)
Rooting using SuperSU
0. Check that you have flashed a custom recovery. If not, please refer to steps right above.
1. Download SuperSU from the official website.
2. Connect your phone and transfer the zip file to the INTERNAL storage (because no recovery can mount external SD card yet as of 13 Nov 2015).
3. Power off phone and boot into TWRP recovery.
(An info dialog will popup asking if you want to keep read-only for /system. I chose NOT to keep, but need someone with knowledge to explain if read-only will block rooting procedure. It will, right?)
4. Touch the Install button and scroll to find the supersu zip.
5. Install the supersu zip. When done, clearing cache/Dalvik is optional (can be done using Titanium Backup anyway once you have root).
6. Reboot system.
Enjoy your root! :good:
Good work, but is it for the M4 Aqua E2353 only?
adejager1 said:
Good work, but is it for the M4 Aqua E2353 only?
Click to expand...
Click to collapse
Of course, that's what the title says lol. I cannot vouch for the other models.
I think the instructions can be modified, like for example different serial number for different model.
I'm having problem after clicking the BLU button, I'm doing what it said "Unplug USB cable, power off, hold vol down, connect USB cable" but will have an error USB not recognized, check flashtool screen it said usb debugging is off, make sure your not in MTP, I already turn usb debugging on. I'm stuck here.
btw I disable signed driver enforcement already and installed the ADB, but still no luck
Running OS windows 10
help please, :crying: if you can make a video it may help. thanks!
Everything went well for me thanks a lot.
i'm on windows 8 64bits
---------- Post added at 05:20 PM ---------- Previous post was at 05:16 PM ----------
jmikaii said:
I'm having problem after clicking the BLU button, I'm doing what it said "Unplug USB cable, power off, hold vol down, connect USB cable" but will have an error USB not recognized, check flashtool screen it said usb debugging is off, make sure your not in MTP, I already turn usb debugging on. I'm stuck here.
btw I disable signed driver enforcement already and installed the ADB, but still no luck
Running OS windows 10
help please, :crying: if you can make a video it may help. thanks!
Click to expand...
Click to collapse
Have you installed the drivers in -> C:\Flashtool\drivers
select :
Flashmode Drivers (1st line)
Fastboot Drivers (2nd line - this one will be used)
Common drivers Nicky (11th line)
Yes i install it all, guys do you think because the os im using? "windows 10"?
Thanks a ton, bro successfully rooted my Sony Xperia M4 Aqua Dual (E2363).
jmikaii said:
I'm having problem after clicking the BLU button, I'm doing what it said "Unplug USB cable, power off, hold vol down, connect USB cable" but will have an error USB not recognized, check flashtool screen it said usb debugging is off, make sure your not in MTP, I already turn usb debugging on. I'm stuck here.
btw I disable signed driver enforcement already and installed the ADB, but still no luck
Running OS windows 10
help please, :crying: if you can make a video it may help. thanks!
Click to expand...
Click to collapse
I also find a problem of unable to unbrick my bricked my old sony device on windows 10 with flashtool.
I also get the same error.
Try on windows 8.1.
failed unlock
i have problem when trying to unlock the bootloader. it says "failed <remote: commend not allowed>" in flashtool
can someone help me?
thanks
alvind27 said:
i have problem when trying to unlock the bootloader. it says "failed <remote: commend not allowed>" in flashtool
can someone help me?
thanks
Click to expand...
Click to collapse
IS bootloader unlock allowed : yes ?
Go to calls,enter *#*#7378423#*#* and go to service info-configuration
angelus-95 said:
IS bootloader unlock allowed : yes ?
Go to calls,enter *#*#7378423#*#* and go to service info-configuration
Click to expand...
Click to collapse
yes, I already check it at first and it say "yes"
i search in google there's no answer too for this. i really really need to root my phone because i'm running out of internal memory
Same issue with alvind27
Same issue as alvind27 has there been a fix yet.
my model is the same as yours
Works fine with my 2303
Great tutorial. Thank you so much. I forgot many things since someone has stolen my Xperia S. Root revived this phone. Android 6 + root is great future but now I am happy with that, too.
Working on my E2303. If someone has problem then he/ she has to learn more about it. Just follow steps slowly and everything is gonna be fine.
I had the same problem but also on windows 10, flashed in a windows 8 computer without any major issues.
I have a problem. Me appears seen, how can I fix?
C:\Flashtool\x10flasher_lib>adb reboot bootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device unauthorized. Please check the confirmation dialog on your device.
C:\Flashtool\x10flasher_lib>adb reboot bootloader
C:\Flashtool\x10flasher_lib>fastboot flash recovery recovery.img
target reported max download size of 268435456 bytes
sending 'recovery' (32650 KB)...
OKAY [ 1.032s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 1.032s
Click to expand...
Click to collapse
Stuck at Bootloader Unlocking...
Hi, I have a problem here. I have the E2353 Xperia M4 Aqua and use the mac version of Flashtool
I've followed every step from checking whether or not the phone's BL can be unlocked (it is allowed) to putting all the necessary text files in the "mydevices" and "registeredDevices" folder. Problem is when I press and hold the VOL Down key and plug the USB in...nothing happens, it's just stuck there at the instructions screen while I keep holding the down volume key. I expected to see the Bootloader Unlock Wizard but it doesn't appear
Is there something I missed? What should I do?
Worked on e2363!
I managed to work on my E2363, though at the beginning I had problems and errors (when using fasboot to record TWRP.img got the error "unable to record the image").
In step 0, i got YES, but the error I mentioned persisted.
So did all the steps again (assuming in step 0 I would have gotten "no") and worked, the TWRP was recorded.
mikaaa6 said:
I have a problem. Me appears seen, how can I fix?
Click to expand...
Click to collapse
are you already unlock the bootloader first before flash recovery?
alvind27 said:
yes, I already check it at first and it say "yes"
i search in google there's no answer too for this. i really really need to root my phone because i'm running out of internal memory
Click to expand...
Click to collapse
what mean your bootloader say "yes"
check your bootloader again and maybe this can your answer
silencar said:
are u sure that it is unlocked? there are 3 kinds of status:
Bootloader unlock allowed: No - u can't unlock BL
Bootloader unlock allowed: Yes - u can unlock BL, BUT its not unlocked yet
Bootloader unlocked: Yes - BL is unlocked
Click to expand...
Click to collapse
sent from E2353 using bootloader
mufhm said:
are you already unlock the bootloader first before flash recovery?
I did every step to unlock the bootloader without any error, however Rooting Status spent UNAVAILABLE
Click to expand...
Click to collapse
IMPORTANT: It appearance that Huawei is no longer going to provide bootloader unlocking services for their devices. Because of this, this guide is of no use unless you can find a way to get a code or you just held onto the code.
Hello, this is a guide for unlocking the bootloader and rooting the Huawei Ascend XT. I am writing this because the current guide is not very well written and does not contain bootloader unlock instructions. This will be split into two parts: Part 1, unlocking the bootloader, and Part 2, rooting the phone.
PLEASE NOTE THAT FOLLOWING THESE INSTRUCTIONS WILL WIPE YOUR DEVICE. I AM NOT RESPONSIBLE FOR AND DAMAGE DONE TO YOUR PHONE!
THINGS YOU WILL NEED:
1. A Huawei Ascend XT with at least 60% of battery left
2. A computer with adb drivers, fastboot drivers, and the Huawei USB drivers
3. A Micro-SD card for your backups (THIS IS VERY IMPORTANT! PLEASE MAKE BACKUPS!)
4. TWRP for this phone. This can be found here: https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933 (credits to enigma2446)
5. The ZIP containing SuperSU. This can be found here: https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933
6. The SDK Platform Tools. These can be found on the android studio website.
PART 1: UNLOCKING THE BOOTLOADER1. Geting the Bootloader Unlock Code: You need to get your bootloader unlock code. You can get this by going to https://emui.huawei.com/en/plugin.php?id=unlock
(EDIT: It appears that this website is down. I have read that if you PM Huawei on Twitter or call them and provide all the details of your phone, they will give you a code. I have not tested this method, bit people have said it worked with the mate 10.) and signing into your Huawei ID. If you dont have one, create one. Then, follow the instructions given to you by Huawei to get the code.
2. Enabling the Enable OEM Unlock Option: To enable this option, you must enable developer options. To do this, go to Settings>About Phone and tap the Build number until it says "You are now a Developer". back out of About Phone, and go to Developer options. turn on "Enable OEM unlock" and press Enable.
3. Enable USB Debugging: While you are still in Developer options, enable the option 'USB debugging" and press OK.
4. Booting Into the Bootloader: once you have completed the first three steps, you can now boot into the bootloader. Connect your phone to your computer, and open the Platform Tools folder you should have downloaded and extracted. Shift-Right click, and press "Open Command Window Here" or "Open Powershell Window Here", depending on your version of windows. Once it is open, make sure your device is detected by typing "adb devices". If it displays your device, you are good to continue. If not, something is not set up right on your computer or phone. Once you verified that your phone is detected, type "adb reboot bootloader".
5. Unlocking the Bootloader: Once your phone has booted into the bootloader, you can now unlock the bootloader. YOUR PHONE WILL BE WIPED ONCE YOU TYPED THIS COMMAND. You can unlock it by typing "fastboot oem unlock <your bootloader unlock code>". Once it has finished, you can reboot your phone, and just run through the setup fast, because you will still have to wipe it again.
PART 2: ROOTING YOUR PHONE1. Move the TWRP image you downloaded (called
Xtrecovery) to your Platform Tools folder and rename it to "TWRP.img"
2. Insert Your Micro-SD Card
3. Move the SuperSU Zip you downloaded to the SD card
4. Re-Enable USB Debugging: Enable Developer options by going to Settings>About Phone and taping the Build number until it says "You are now a Developer". Back out of About Phone, and go to Developer options, and enable USB debugging, and press OK.
5. Boot Into the Bootloader: Type "adb reboot bootloader" into your open CMD window or Powershell window.
6. Verify That your Phone says that the Bootloader is unlocked
7. Type "fastboot boot TWRP.img"
8. TWRP should boot. Tap "Keep Read Only"
9. You should now be in TWRP. Go to Backup>Select Storage and choose your Micro-SD card and tap OK. Uncheck everything and check "Recovery". Then, Swipe the slider to back up your stock recovery partition.
10. Once it has finished backing up, reboot your phone to the bootloader.
11. Once it is in the bootloader, type "fastboot flash recovery TWRP.img" to flash TWRP as your recovery. (I believe this is the point where your warrenty will be invalidated by Huawei, so be careful.)
12. When it finishes flashing TWRP, reboot your phone to TWRP by holding down the power button and volume up
13. It should boot to TWRP. Tap "Keep Read Only", then go to (YOU ARE ABOUT TO WIPE IT AGAIN)Wipe>Format Data and type yes, and hit the enter button.
14. Once it finishes, go to Backup>Select Storage, select your SD card and hit OK, then check every box to backup all six partitions, and swipe to back them up. (At the end, it may seem to get stuck at 98-99%, DO NOT STOP IT! It is generating an MD5 checksum)
15. When it finishes backing everything up, go back to the home screen of TWRP, then go to Install, navigate to where you stored the SuperSU ZIP, select it, then swipe to flash it.
16. When it finishes flashing the SuperSU ZIP, tap "Clear Cache/Dalvik" and swipe to clear them.
17. Reboot your phone. IT WILL REBOOT MULTIBLE TIMES AND APPEAR TO BE STUCK SOMETIMES, BUT DONT TOUCH IT! This is normal and it will eventually boot like normal.
That's it!
Your phone should now be rooted and have SuperSU installed. Please note that this is a Systemless root, and will be removed if you factory reset your phone.Thanks to divineBliss for creating the original instructions.
What do we do after we get root to install custom ROMS? please advise
nedfred0 said:
What do we do after we get root to install custom ROMS? please advise
Click to expand...
Click to collapse
To install a custom ROM, you need the ROM you want to install, gapps depending on the ROM, and the proper firmware. The firmware you are on can be found under about phone and is the last 4 digets of the build number (in the format of B1xx). Once you are on the proper firmware, have your ROM and other things it may require, (every ROM is different), and a backup (just in case), you can flash the ROM from TWRP. Follow the instructions provided by the creator of the ROM to properly flash it.
Where do you get the USB driver at because I am not seeing it at http://consumer.huawei.com/us/support/phones/ascend-xt/
BTJustice said:
Where do you get the USB driver at because I am not seeing it at
Click to expand...
Click to collapse
The drivers come with HiSuite. Download it and you should be good to go.
randomness725 said:
The drivers come with HiSuite. Download it and you should be good to go.
Click to expand...
Click to collapse
Thanks. I tried that but couldn't get it to go so I downloaded these instead which did the job:
https://www.androidfilehost.com/?fid=817550096634745788
does this work on the new h1711 huawei assend xt2
xaneth201 said:
does this work on the new h1711 huawei assend xt2
Click to expand...
Click to collapse
It will not. The TWRP recovery image is device specific and might brick your device if you flash it to your phone.
bricked 1711
randomness725 said:
It will not. The TWRP recovery image is device specific and might brick your device if you flash it to your phone.
Click to expand...
Click to collapse
Well I did not see that, so yeah, I have bricked it. IT comes up and says it is unlocked, it used to sit there then boot into the system.
So I downloaded the TWRP, tried to reboot to recovery and nothing.
Now, it just gets to the yellow warning screen, then goes black. Just bought this today on a black friday sale for 49.00
But did it for a reason. Now I would like to be able to recover it....
I was able to run adb and fastboot, so know that the drivers work, but it looks like it won't even get there now.
And it won't even go to the recovery, so I guess this phone is a real brick.
Can't seem to get the back cover off to remove the battery either.
You need a copy of the stock H1711 recovery image to use
"fastboot flash recovery H1711-stock-recovery.img" to restore the stock recovery. Until someone creates a working H1711 TWRP, I don't know where you'll find a stock H1711 recovery image file.
scrungydoolittle said:
Well I did not see that, so yeah, I have bricked it. IT comes up and says it is unlocked, it used to sit there then boot into the system.
So I downloaded the TWRP, tried to reboot to recovery and nothing.
Now, it just gets to the yellow warning screen, then goes black. Just bought this today on a black friday sale for 49.00
But did it for a reason. Now I would like to be able to recover it....
I was able to run adb and fastboot, so know that the drivers work, but it looks like it won't even get there now.
And it won't even go to the recovery, so I guess this phone is a real brick.
Can't seem to get the back cover off to remove the battery either.
Click to expand...
Click to collapse
download hisuite, enable oem unlocking and usb debbuginig, you gotta also get tha password or the unlocking, denn u run cmd and type:
adb devices
i hope i helped
there is easy way to get unlock bootloader pass for all huawei
just by IMEI search on google "hardreset24 unlock bootloader" there is full info how to do it
BTJustice said:
Where do you get the USB driver at because I am not seeing it at http://consumer.huawei.com/us/support/phones/ascend-xt/
Click to expand...
Click to collapse
Here is the site for USB drivers for all Huawei models:
http://huaweiadvices.com/download-huawei-usb-drivers/
Good luck....
Does the phone even have a fastboot mode?
RomLord14495 said:
Does the phone even have a fastboot mode?
Click to expand...
Click to collapse
Sure it does
Notes on booting up the phone (from power off)
Bootloader (fastboot) = power + volume down + USB hooked to pc
eRecovery = power + volume up + USB hooked to PC
TWRP = power + volume up
Click to expand...
Click to collapse
Optionally you put phone into bootloader/fastboot or recovery modes by typing from an adb prompt "reboot bootloader" or "reboot recovery"
Hi there. The website link for submitting your imei to get the unlock code doesn't work. Does anyone know how to get this code now?
dominoes20 said:
Hi there. The website link for submitting your imei to get the unlock code doesn't work. Does anyone know how to get this code now?
Click to expand...
Click to collapse
You'll have to use DC Unlocker and pay to unlock until the page returns
Since unlocking the bootloader is no longer supported, I have a suggestion but am afraid to try myself.
So, download stock version of rom (aka fastboot rom). Extract, replace recovery.img with twrp (renamed to recovery.img). Restart phone in EDL mode, flash. In theory, edl is working fastboot mode so it shouldn't matter if bootloader is unlocked, correct?
ezopantyd said:
there is easy way to get unlock bootloader pass for all huawei
just by IMEI search on google "hardreset24 unlock bootloader" there is full info how to do it
Click to expand...
Click to collapse
Imma try this out, I’m stuck in a weird situation where my sd card slot broke. When I sent it in for service, they said it was rooted and refused to fix it. I specifically did not root it so that I could send it in for warranty service. So it’s mission to try and root, unlock boot loader etc so that I can have more storage space
---------- Post added at 11:50 AM ---------- Previous post was at 11:36 AM ----------
ezopantyd said:
there is easy way to get unlock bootloader pass for all huawei
just by IMEI search on google "hardreset24 unlock bootloader" there is full info how to do it
Click to expand...
Click to collapse
Can you be a little more specific? I didn’t get that info on google
Realme GT BL unlocking tool based on realme UI 2.0 (Android 11) is here !
I AM NOT LIABLE FOR ANY DAMAGES, BRICKED PHONES, OR ANYTHING ELSE THAT HAPPENS. IT IS YOUR CHOICE TO FOLLOW THIS GUIDE, AND THE CONSEQUENCES ARE YOUR RESPONSIBILITY.
Support unlocking models
realme GT (RMX2202)
[BL Unlocking Instructions] (Important!!!)
1. After unlocking, it may cause unpredictable effects on the phone;
2. The third-party firmware may make some functions of the mobile phone not work properly, for example, the camera function is not available, and may cause damage to the device;
3. It may cause the leakage of private personal information on the mobile phone;
4. After unlocking, it will affect the system upgrade, and users cannot receive the subsequent updated version of realme UI;
5. After unlocking, the phone status is equivalent to restoring the factory settings, all user personal data will be cleared, it is recommended to back up the data in advance;
6. After the phone is rooted, if necessary, you can contact the realme service center to assist in flashing the phone. If you can flash back to the official version, the warranty status of the phone will not be affected, but you cannot enjoy the return and exchange service; if you can’t flash back to the official version or the result Mobile phone hardware failure is not covered by the warranty and needs to be paid for repair according to the situation.
Click here to check offline service outlets https://www.realme.com/support/services
3. How to unlock BL?
Ready to work:
1. Download realme GT unlock tool APK:
Link: https://pan.baidu.com/s/1F7ZGGh9OmDoEhJmMPwO79w
Extraction code: h0xt
Link: https://lanzoui.com/b00o2iupa
or
https://drive.google.com/drive/folders/1Jp-tNhEuRNkRrj_juzv4-VgFmX9MA6Tc?usp=sharing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Keep the battery power of the mobile phone above 60%
3. Prepare a USB data line
4. Prepare a PC/Macbook
Officially begin:
Step 1. Open developer mode
Go to "Settings" → "About Phone" → "Version Information", click "Version Number" 7 times to open the developer mode;
Step 2. Open oemlock
Enter "Settings" → "Other Settings" → "Developer Mode", open OEM unlock;
Step 3. Use APK to enter fastboot mode
Connect to the network, open the APK, and apply for unlocking in the APK.
Step 4. Click "Start Application", please read the "Disclaimer" carefully and manually tick agree.
Step 5. Click "Submit Application" and then click "Return" to return to the application interface, and wait for about 15 minutes. You can check whether you have passed the review through "Query review status" on the application interface.
Step 6. Unlock fastboot
After the review is passed, click "Start Deep Test", the phone will restart to the START interface
(The following is a real shot of the unlocking process)
Step 7. Connect to the computer and run: fastboot flashing unlock
a. Go to https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/ to download platform-tools for Windows
b. After downloading, unzip it to the root directory of drive c
c. Keyboard Win + R, enter CMD and then Enter
d. Enter cd.. and then Enter until C:\ is displayed
e. Enter cd platform-tools and then Enter
f. Enter fastboot flashing unlock and then Enter to continue step 8 of this post
Step 8. Follow the prompt on the phone interface, press the volume down button to select unlock, and then press the power button to confirm. After selecting UNLOCK THE BOOTLOADER, the phone will restore the factory settings and restart to the language selection interface.
Note: This restart will clear all user data.
Four, lockback tutorial
method one:
In the shutdown state, press the volume down button and the power button at the same time to enter the BootLoader interface, connect to the computer, and enter: fastboot flashing lock
The phone will enter the lock interface, select LOCK THE BOOTLOADER with the volume button, confirm with the power button, and the phone will restore the factory to the language selection interface.
Method Two:
When the phone is turned on and connected to the computer, enter: adb reboot bootloader
The phone will enter the BootLoader interface
Input: fastboot flashing lock
The phone will enter the lock interface, select LOCK THE BOOTLOADER with the volume button, confirm with the power button, and the phone will restore the factory to the language selection interface.
After the Bootloader is locked by either of the above two methods, please download and unlock the APK to complete the installation, and apply to exit the in-depth test on the application interface.
Once again, there will be the following risks when operating BL unlocking! ! ! Very important, must see!
1. After unlocking, it may cause unpredictable effects on the phone;
2. The third-party firmware may make some functions of the mobile phone not work properly, for example, the camera function is not available, and may cause damage to the device;
3. It may cause the leakage of private personal information on the mobile phone;
4. After unlocking, it will affect the system upgrade, and users cannot receive the subsequent updated version of realme UI;
5. After unlocking, the phone status is equivalent to restoring the factory settings, all user personal data will be cleared, it is recommended to back up the data in advance;
6. After the phone is rooted, if necessary, you can contact the realme service center to assist in flashing the phone. If you can flash back to the official version, the warranty status of the phone will not be affected, but you cannot enjoy the return and exchange service; if you can’t flash back to the official version or the result Mobile phone hardware failure is not covered by the warranty and needs to be paid for repair according to the situation.
If the phone is abnormal after rooting, you can contact the realme service center for assistance. Service center outlets:
https://www.realme.com/support/services
For unlocking projects, if you have communication needs with the realme development team, please send an email to [email protected]
Source
***********************
The detailed version of BL unlocking guideFollowing the announcement of the release of BL unlocking this week, some real fans said that the introduction of the unlocking process was not detailed enough, and the community king's night code word, today I will present you a detailed version of the BL unlocking guide and popular science!
One, three deadly questions
1. Do you know what is to unlock BootLoader and what is root authority?
If you don’t know, it is recommended that you do not unlock BootLoader, let alone root.
2. Will you use adb and fastboot? Will you use TWRP? Do you know how to do double-clearing, card swiping, etc.?
If not, it is recommended that you do not unlock BootLoader, let alone root.
3. What do you do after unlocking Bootloader & root?
If you don't even know what to do, I advise you not to try it with curiosity, and unlock it only for people who really need it.
The important thing is said three times, there are risks in playing the machine, and you need to be cautious when you refresh the machine. Read the notes for this post carefully. Please be at your own risk for serious consequences such as the phone's failure to turn on or data loss, and the official after-sales service can help you flash back the official firmware. (If the hardware of the phone is damaged due to flashing, do I need to send the phone for repair, and may need to pay for repairs)
Two, unlock preparation
1. Apply for a realme account
Apply for Portal → https://id.realme.com/index.html
2. Download and apply to unlock APK
Link: https://pan.baidu.com/s/1F7ZGGh9OmDoEhJmMPwO79w
Extraction code: h0xt
3. Install APK and apply for unlock qualification
After reading the risk warning carefully, wait for the official release of the unlocking authority (about 15 minutes), and you can check whether it has passed the review through the "Check review status" on the application interface. After issuing the unlocking authority, apply for the APP to write the relevant information into the system, and then the following unlocking operations can be performed.
4. Backup data
Before unlocking, you can back up personal data, open-Settings-Backup Settings-Other Settings-Backup and Restore, back up important data, and then copy the built-in storage Backup directory to the computer or mobile storage, anyway, don't put it in the operation On your mobile phone, you can also backup very important data such as contact call records, short messages, etc. to the cloud. After unlocking the BootLoader, you can restore the data by yourself after you perform the required gaming operations.
5. Mobile phone settings and data preparation
①Settings-About the phone-Tap the version number 5 times in a row-prompt the developer option has been opened;
②Settings-other settings-developer options-turn on OEM unlocking and USB debugging;
③Download adb & fastboot command:
https://developer.android.google.cn/studio/releases/platform-tools
●Download SDK Platform-Tools for Windows window operation
●Download SDK Platform-Tools for Mac Mac operation
●Download SDK Platform-Tools for Linux Linux operation
After the download is complete, restart the phone to enter Fastboot mode.
Three, unlocking process
1. Decompress the file just downloaded on the computer, open it, and put it in the C:Windows\System32 directory of the C drive, as shown in the figure;
2. Win+R open the cmd window, enter adb reboot bootloader / open the depth test APP, click to start the depth test (both methods are available);
3. When the phone restarts, you see DEVICE STATE: locked, indicating that the BootLoader is in a locked state at this time;
4. Start unlocking:
After connecting to the computer, enter fastboot flashing unlock or fastboot flashing unlock_critical in the computer cmd window
5. Ask if you want to unlock, use the volume key to select UNLOCK THE BOOTLOADER to confirm the unlock, and select DO NOT UNLOCK THE BOOTLOADER for "No" (it’s too late to regret at this time), and confirm with the power button;
6. At this time, the phone will restart and enter the recovery mode to format the data partition, and then automatically power on. Congratulations, the phone has been unlocked successfully.
Fourth, check the unlock status
1. Open the cmd window on Win+R, enter adb reboot bootloader /open the depth test APP, click to start the depth test; (both methods are available);
2. Enter Fastboot mode again, you can see DEVICE STATE: unlocked;
3. It means that BootLoader is unlocked at this time, and you can use fastboot flash [partition name] [file path] to flash the file;
4. Flashing TWRP into the player in FastBoot mode. Flashing twrp.img into the recovery partition. (twrp needs a competent person to compile);
5. fastboot flash recovery twrp.img;
6. Select recovery mode with the volume button, press the power button to confirm, and enter TWRP (recovery mode).
Five, lethal science
1. What is to unlock BootLoader?
BootLoader runs before the operating system kernel runs. It can initialize hardware devices and establish a memory space map, so as to bring the system's software and hardware environment to a suitable state, so as to prepare the correct environment for the final call of the operating system kernel. In embedded systems, there is usually no firmware program like BIOS, so the loading and starting tasks of the entire system are completely completed by BootLoader.
2. What is root authority?
Root authority means that the mobile phone has the highest authority. For example, the administrator of the computer can modify the mobile phone software and some functions of the mobile phone at will.
3. How to use adb and fastboot?
We don’t use much here:
adb reboot bootloader reboot into, bootloader mode
fastboot flashing unclock unlock bootloader mode
fastboot flash recovery xxx flash files to recovery partition or boot partition
fastboot flashing lock lock bootloader mode
4. How to use TWRP? How to perform double-clearing, card swiping and other flashing operations? What can I do after rooting?
①TWRP uses double clearing: Homepage->Clear->Slide to restore factory settings (this operation will delete files in your data partition except the built-in storage).
②Format Data: Homepage ->Clear ->Format Data ->Enter yes (this operation will clear all files in your data partition, including built-in storage.
③Card swiping: Homepage -> Installation -> Browse to the card swiping package you need, click and swipe to swipe in.
④Backup: Homepage -> Backup -> Select the partition you need to back up -> Slide backup.
⑤Restore: Homepage ->Restore ->Select the version to be restored ->Select the partition to be restored ->Slide to restore.
⑥Advanced: Homepage->Advanced->File Management; Homepage->Advanced->Terminal command line can enter terminal commands.
⑦After rooting, we can modify: software, user data, system, or flash into the three-party system. (Three-party system needs to be adapted)
unfortunately it does not work for the eu version
Kratong said:
unfortunately it does not work for the eu version
Click to expand...
Click to collapse
unfortunately, yes
Wow... Suitable for many variants of GT and GT Neo...
Are you sure you need a Realme account to make the In-Depth test apk work? I didn't create a Realme account for that purpose on my old Realme phone.
Seems a bit different now.
I'm concerned would the process inject any extra apks to the system, and how much information would that send to the company.
Btw, I've just checked, mine is GT Neo RMX3031_11_A.25
Not sure whether can use the script for A.19
This Realme GT is far more complicated than my previous oneplus models...
I used this to unlock my gt 5g,
now im using EU ROM
MrVeverything said:
I used this to unlock my gt 5g,
now im using EU ROM
Click to expand...
Click to collapse
Do you have any clue your EU ROM will receive OTA update? I am thinking to do the same...
MrVeverything said:
I used this to unlock my gt 5g,
now im using EU ROM
Click to expand...
Click to collapse
hi,, how did you do that.. which rom did you download and how did you do it
MrVeverything said:
I used this to unlock my gt 5g,
now im using EU ROM
Click to expand...
Click to collapse
How did you do that !!!!
EU ROM
MrVeverything said:
EU ROM
Click to expand...
Click to collapse
but the steps are not clear
MrVeverything said:
EU ROM
Click to expand...
Click to collapse
the vedio is not clear can you tell me what you doing ....
Any news about global version
Or about the new devices gt master explorer edition
Hi I am stuck in the following part from the original post. The issue is when i type "fastboot flashing unlock" i get this error:
"waiting for any device"
- i have enabled usb debugging and oem unlock already.
a. Go to https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/ to download platform-tools for Windows
b. After downloading, unzip it to the root directory of drive c
c. Keyboard Win + R, enter CMD and then Enter
d. Enter cd.. and then Enter until C:\ is displayed
e. Enter cd platform-tools and then Enter
f. Enter fastboot flashing unlock and then Enter to continue step 8 of this post
Anyguide or video available for GT Neo 2 device
vygavedha said:
Anyguide or video available for GT Neo 2 device
Click to expand...
Click to collapse
no , sorry
does anyone have the file to do it in Android 12?