Hello I have a 2023 Cadillac Lyriq ( not the Debut Edition ), the right side of the screen where AAOS lives is not turning on.
I performed a display reset by holding the "phone hang up" button for 10 seconds -> open door -> close door -> nothing happens.
I wonder if you know of a different way to reset AAOS or restart it? Thank you =)
The screen is 33 inches and split in 3 or 4 areas and looks like only the AAOS side is not working the other areas are working just fine.
Red rectangle is the area not working.
Related
I played many games that make use of "landscape" mode, that is the screen is rotated. Those games where the on-screen "joystick" on the bottom-left of the screen (landscape) OR top left (portrait) and "button" on the bottom-right (landscape) or bottom left (portrait), I notice that sometimes the screen did NOT register my touch.
When it happened, I lift up my thumb and press it or move the button again and nothing is registered. After about 2-5 seconds, THEN it register again.
I used to have the International Note and I never experiences this issue.
I tried pretty much ANY games or apps and the problem persists.
Anyone experiences this?
This phone has never been modified, no custom ROMS, never rooted, using the latest OS from AT&T ...
And today, for whatever reason, when making originating a phone call, and once I've hit "dial" ... the phone screen goes completely black except for the status bar at the top (the one you can swipe down). I'm saying that whereas usually, after hitting "dial" and as the phone dials, you can actually see a screen full of information (hang up botton, number/name of who your dialing, etc.) ... in this case and now, there is just a black screen.
Though there is a black screen (other than the status bar at top), I can still hear the phone ring and even have a conversation should somebody answer. But when the call is over (the person on the other end has to end the connection because I have no screen interface to do such), the screen remains blank (other than the status bar at top) and none of the bottom, permanent keys are operative either ("home" / "back" / settings / etc.). To get back to the home screen, I have to pop the battery and re insert it and re start the phone. But even then, it's acting weird: when booting, at the "Reimagine Possilbe" screen (I think that's what it says) it hangs there for about 45 seconds (usually only about 5 when functioning correctly) and will eventually end up at the home screen.
But if I originate a call, the cycle repeats.
I've completely reset the phone to factory defaults at least three times, formatted the USB storage and the whole nine yards but it remains glitched as described above.
...
So... has anyone seen/heard of this?
I'm thinking of just warrantying the phone as it's only about 5 months and I figure AT&T should have no issue as it's such a replicable problem and it certainly doesn't seem to be software related as it's completely stock and multiple factory resets have not worked but wanted to put a line out here first to see if anyone else has experienced this.
Thanks in advance for any information.
Best,
Joel.
I think the network is fugazi right now, as I had issues with the phone, and read about another user having same troubles. I'd give it a little time.
rangercaptain said:
I think the network is fugazi right now, as I had issues with the phone, and read about another user having same troubles. I'd give it a little time.
Click to expand...
Click to collapse
I sure hope so. Even though I've reset the phone (which sucks) ... I'd prefer that over having to go to the store and all...
Odd that a network problem could cause such, though ....
Thanks for the word ...
Best.
.joel
Just a llittle update ...
I changed the "Proximity Sensor" to OFF and now the normal iin-call screen appears but it never goes away, which can be problematic.
In general, I've always had the proximity sensor set to ON as this allows the in-call screen to blank after a few seconds (complete blank with no status bar at top) and then reappear when I remove the phone from my ear.
But when I re enable the proximity sensor, now ... the screen blanks immediately (excepting the status bar at the top) and never comes back ... even after my call recipient ends the call ...
I'm just gonna warranty at at the local service center; at this point (two days now with all my friends AT&T phones working fine) I'm pretty sure something is glitched with the internal sensor that manages the proximity settings ...
Thank God for warranty.
My tablet is HKC P077A with 8GB ROM, 512 RAM and a 7'' Touch screen (Android 4.0.3). I am having 2 problems
When I switch on the tab, first "HKC" logo comes to screen and then disappears to show "android". This is standard. But after that the thing wont move forward. Just keeps on showing "andriod" with a flashing like thing implying the loading process. But after long wait there is no start screen and nothing changes. It just hangs there....
But if somehow got it to get into normal working(I donno how, but It sometimes boots ok and gets into normal working mode, with home screen and apps and everything). So once I get it right the other problem I am having is that the touch is giving VERY bad response. I have to click at spots multiple times to select that thing. Also the response is very slow. Its like the tablet is hanged. But when I tried connecting a mouse (through OTG) and everything works fine again. Is my touchscreen gone bad..??
I am already done with, reset (from "settings> backup and reset") [I cant find how to do factory reset on this model from "off" state(read below)]
I have tried to get into reset screen by pushing "Power Button+Vol up" button. Then I know the tab gets turned on (I can hear a small white noise from the loudspeaker) but nothing comes to screen. So the "Robot with heart open" is never shown. I also tried using "power button + Volume down", this takes me to a screen written in chinese. Now, I don't know Chinese but from the look and feel, its a troubleshooting window, where I can check weather components of my tablet are working (eg. I click one menu(with difficulty), then the front cam turns on, another menu makes loud sounds from speaker and another flashes many colors in screen etc). I found that most are ok except something called "T" (On the screen, its the last item to the right, is it "touchscreen"??)
So, what can I do to get my tab to work smooth again..? Is the touchpad having trouble..? Need I do any specific troubleshooting..?? Any Ideas on which key combinations to get on to the "factory reset" menu from off state..??
Also can u please specify the key combinations to the tablet factory-reset menu from "off" state.
Hello together
I have kind of a strange problem. Yesterday I got my new tablet (IRULU X1S) and it's a pretty neat thing, runs fast and everthing was working fine.
Then I have been using the chrome browser and let the tablet lie around. When the screen was darkening (because of idle) I turned the tablet and the screen tilted. Since then there is a bright bar on top of my screen (if I hold the phone upright).
When I tilt the Phone the bright bar stays at the same place, meaning the bar is now on the side.
Its almost as thick as the status bar and it's way brighter than the rest of the screen.
One could say the rest of the screen still seems "darkened".
What is really really weird is, the bright bar is even visible if I enter the phone "root" menu (pressing vol down und power). The top pixels seem brighter than the rest.
Is this a known Android poblem? It can't be a burn in, because it happened after tilting the screen and is there since then.
I tried to remove all apps that I installed and even factory reset the tablet. The bright bar is there in every screen, on the bootscreen and also in the "root" menu. Is there maybe a way to reset the phone to all defaults, e.g. putting a new OS on the phone? Because it has to be a software bug...
Thanks for reading and I hope you have some ideas how to fix this!
Hi, I suspect this may have something to do with me setting my Logitech ZeroTouch as a trusted device to unlock my phone, but sometimes when I dock my phone to it in the car, all I get is an almost empty black screen, just with the date and time and temperature in the top right hand corner, and my step count at the bottom. I need to undock and redock to get my home screen.
I’ve removed the ZeroTouch as a trusted device to see if this clears it, but was wondering if anyone else had come across this strange almost empty screen.