I downloaded boot.img and flashed it through Magisk, then installed it and just the phone didn't turn on, stopped on MIUI and that's it (It didn't even reboot, it just got stuck)
But as a result, I turned it off, went to fastboot and installed a clean boot, and so the phone came to life
Related
Handset: Xiaomi Redmi 3 Pro.
Steps done:
1. bought on aliexpress with some suspicious bloatware preloaded.
2. was unsure if bootloader is locked, so flashed modified bootloader and TWRP as per this guide: http://en.miui.com/thread-276565-1-1.html
3. flashed latest xiaomi.eu dev build: xiaomi.eu_multi_ido_6.5.26_v7-5.1
4. boot, reboot
5. flash SuperSU via TWRP: UPDATE-SuperSU-v2.65-20151226141550.zip
6. booted and used several days, few reboots. All working fine, except apps closing in background and bluetooth earpiece losing connection. Described here: http://forum.xda-developers.com/redmi-3/help/redmi-3-pro-impressions-closing-t3397186
Where problems have started:
7. Decided to get stable xiaomi.eu release. Maybe forceclose and BT issues are resolved?
8. booted to TWRP and flashed STABLE release from xiaomi.eu: xiaomi.eu_multi_ido_V7.3.1.0.LHPCNDD_v7-5.1.zip
9. also flashed SuperSU without restart: UPDATE-SuperSU-v2.65-20151226141550.zip
10. After restart, I get boot loop.
It does very short boot attemps: when powered on, it vibrates and displays MI logo for a second, then reboots. Repeats it quickly 2 or 3 times and switches off.
Unable to go in to download mode, as volUp + Pwr will also give bootloop.
VolDn+Pwr will load fastboot after one reboot. MiFlash utility finds the phone, but throws an error on flash attempt (file not found or something).
If restarted with all VolDn+VolUp+Pwr buttons pressed, it will not turn on the screen at all, but appears on MiFlash utility and I am able to flash it. But still bootloops after that.
If I flash it with original bootloader, not the modified one as per guide (on step 2), I am able to boot in to china MIUI, and also in to bootloader menu. But of course TWRP does not work.
How do I do it with locked bootloader:
1. flash TWRP?
2. flash stable xiaomi.eu release?
3. get root?
Of course all of this is needed only until stable CM comes out.
Also, if bootloader is unlocked, is it displayed somehow? For example my old motorola would show a nasty warning during boot.
Short update. I have managed to install the latest xiaomi.eu ROM.
Unmodified bootloader is needed.
Flash TWRP via MiFlash separately, after MIUI is installed and booted.
Then flash SuperSU and you're good.
EDIT: I lost all my data since the phone was encrypted, but I recovered it flashing in fastboot mode
My Redmi 3 pro is stuck in a bootloader after trying to root it for the first time.
power off doesn't do anything.
power and volume up doesn't do anything
power and volume down shows a Fastboot logo with a cartoon, but I don't know what to do here and if it is useful.
After 1-2 minutes in fastboot logo it starts again in bootloop.
I've tried to press both volume up and down and power and keep it pressed for several bootloop cycles. It looks like the phone switched off, or at least the screen was black.
After restarting it again bootloop
I think soon the battery will drain and the phone switch off
I really don't know what to do
It was completely fine before that. It has been 3 weeks since I rooted the phone and it has been working perfectly. There was a pending update though (couldn't install it because it was leading to TWRP recovery mode at boot for some reason).
The battery was low, I connected the charger (not PC) and now the phone is not booting up. Just stuck on the logo. I can go into recovery mode and fastboot but that's it. I have no idea how to proceed.
8.2.4.0 (MHOMIDL)
Android version 6.0.1
I followed this guide to root my phone - r/Xiaomi/wiki/advanced/root (on reddit.com) (I can't link the link)
I would appreciate any help
Try to flash miui with my flash or something custom with twrp, if you need to backup data, you can do it with twrp.
its soft bricked....use mi flash tool to fladh fadtboot rom
Hi guys,
I have a Redmi Note 4 (MTK, 3GB RAM/64GB)
Have been using the global stable ROM without issue for about 3-4 months. No custom recovery, root, etc.
Yesterday, I used the phone till the battery completely discharged. I then tried to charge it back up, but it wouldn't boot:
- On normal boot, I see the Mi logo (but not the "powered by Android" one), which then disappears shortly to leave the backlight LEDs switched on, but nil graphics
- I get the same result if I try to boot into recovery (vol up & power)
- Am able to boot into FastBoot without issue
Have tried to flash the China Dev, China Stable & Global Stable Roms using SP Flash 5.1632 (used methods outlined in http://en.miui.com/thread-371349-1-1.html & http://en.miui.com/thread-370620-1-1.html) but to no avail. The flashing process goes through successfully, but the boot failure still persists.
Any ideas anyone? Thanks in advance!
So....managed to work this out
I left the device overnight to discharge completely (with the screen's LED backlights still on)
charged it to full without switching on the device and voila, back to life
hope this helps anyone out there with the same issues
My Poco F1 is unlocked and I recently rooted it with TWRP and Magisk for trying the Substratum theme engine. Yesterday I was texting over WhatsApp and the phone restarted. Restarted as in the POCO logo was visible for 4-5 seconds and the restart again. This went on. I tried going to TWRP but it wont stay for more than a second on TWRP screen before restarting. Same with FastBoot.
So I left the battery to drain and to start again after charging. But not to my surprise same repeated. Wont detect even in adb for the phone gets restarted every 10 seconds. Can someone help me out here?/I donot want this quarantine to kill me already.
Hello,
some days ago I noticed that my Poco F1 (with Lineage OS) is draining battery from 60% in the morning to 15% in the afternoon without using it. After unlocking it from lock screen it told me that it would like to stopp some apps from eating up battery. I agreed.
Some time later I grabbed my phone again and now I was not able to log in. The screen stayed black although my mobile was running.
I switched it off with power button and on again but I could not pass the Poco F1 boot screen. Fastboot Mode was possible too. TWRP was somehow gone. I was not able to enter TWRP. So I entered FasBoot and flashed TWRP (same version as before) again. Still not possible to enter TWRP. So I flashed Orange Fox. But it was not possible to enter that too.
So I flashed the phone completely with the automated Xiaomi Poco F1 repairtool back to the original Global ROM. The bootlogo change to a different Poco F1 bootlogo with the android sign on bottom and now the unlock sign was on top but still no chance to pass the bootscreen. Still no TWRP / or other Bootloader. Only Fastboot or Bootlogo.
What else could I try? I have opend it and removed the power cables so that it will not drain my battery cuz I could not switch my Poco off. (
Is it really bricked?
peterl30 said:
Hello,
some days ago I noticed that my Poco F1 (with Lineage OS) is draining battery from 60% in the morning to 15% in the afternoon without using it. After unlocking it from lock screen it told me that it would like to stopp some apps from eating up battery. I agreed.
Some time later I grabbed my phone again and now I was not able to log in. The screen stayed black although my mobile was running.
I switched it off with power button and on again but I could not pass the Poco F1 boot screen. Fastboot Mode was possible too. TWRP was somehow gone. I was not able to enter TWRP. So I entered FasBoot and flashed TWRP (same version as before) again. Still not possible to enter TWRP. So I flashed Orange Fox. But it was not possible to enter that too.
So I flashed the phone completely with the automated Xiaomi Poco F1 repairtool back to the original Global ROM. The bootlogo change to a different Poco F1 bootlogo with the android sign on bottom and now the unlock sign was on top but still no chance to pass the bootscreen. Still no TWRP / or other Bootloader. Only Fastboot or Bootlogo.
What else could I try? I have opend it and removed the power cables so that it will not drain my battery cuz I could not switch my Poco off. (
Is it really bricked?
Click to expand...
Click to collapse
Check and follow the guide "Clean Install Official Stock ROM" at POCO F1 Ultimate Collection & Guides.
Thanks. I will try and report back.
Retrial said:
Check and follow the guide "Clean Install Official Stock ROM" at POCO F1 Ultimate Collection & Guides.
Click to expand...
Click to collapse
I think the problem is that since I flashed a new global system I do not have USB Debugging enabled. (?)
But there are other problems too:
I can only enter "fastboot" mode. No bootlader (No TWRP/No Orangefox/No Miui Bootloader)
The only screen I get is "Poco F1" Bootlogo.
No errors are reported back. The files seem all to flash fine. But still it won't boot. Just "Poco F1" bootscreen. (Bootloader still open though.)
:sigh:
Thanks anyway.
peterl30 said:
I think the problem is that since I flashed a new global system I do not have USB Debugging enabled. (?)
But there are other problems too:
I can only enter "fastboot" mode. No bootlader (No TWRP/No Orangefox/No Miui Bootloader)
The only screen I get is "Poco F1" Bootlogo.
No errors are reported back. The files seem all to flash fine. But still it won't boot. Just "Poco F1" bootscreen. (Bootloader still open though.)
:sigh:
Thanks anyway.
Click to expand...
Click to collapse
Try this.