Hi, can anyone tell me how I can connect an external modem to the xda? Sometimes I am in places where ther is no GPRS or GSM coverage so the only way I could get on line is by hooking up to a landline.
Related
i have a siemens sx56 phone, got the usb cable and was able to load the xda rom with success, phone is unlocked, but i am nmot gettin a signal ever since i foudn this phone will it get signal when i connect it with my carrier,
Where are you located, network carrier and what band is your phone set to?
HTH
I am on a 3g contract and only use it for phone calls, I do not use the 3g stuff(directley as I know of) Is it possible to transfer my IMEI number to the XDA11 and will it work on the 3G network. I can then use the XDA11 and not have to carry two phones, well more like bricks but good stuff.
IMEI is harcoded into a phone and cant be changed in most cases not to mention it being illegal
if 3's sim were compatible which the newer ones are not you could use it in the xda phone though unless 3 have some odd IMEI locking on their networks
Thank you for your reply rudgear
Thank you for your reply rudgear, If it was possible could it work. Changing IMEI is legal in the uk, but not in some countries.
Re: Thank you for your reply rudgear
m01y1i00 said:
Thank you for your reply rudgear, If it was possible could it work. Changing IMEI is legal in the uk, but not in some countries.
Click to expand...
Click to collapse
YES !!! youre right.... so far I know in Indonesia almost everybody can change imei ...
Hi , I don't konw about the IMEI , but I know that you can use the 3G sim card with 2G phone if the provider use another network for roaming , in this case you will use the roaming one always and you will lose the benfits of 3G.
The only reason I have a 3g phone from three is the cheap calls/conrtact I don't want the 3g stuff, it's to expensive at the moment. I think 3g link up with O2 if there is no signal on thier network. :idea: maybe it,s possible to stay on the O2 network with a 2G phone?
indra 9110
I have read http://wiki.xda-developers.com, this did not help, I bought a serial cable and used that with a full reset and the xda malipulator, that did not work or the xda2unlock.
the xda manipulator only work with walaby xda1 devices and some say only with some radio stacks
as far as i know you cant change the imei it's hardcoded in a chip or something and cant be altered could be wrong though but i've never heard about anybody doing it
Currently I use 3G sim card with 2G phone and it work fine but in roaming mode because the 3G company has contract with another company to serve there customers where is no 3G coverage ... however my brother signed new contract with 3G and they give him sim card but in diffrent color , The new sim card doesn't work in my phone which mean the company changed something in the new sim cards .
note : I have to use manual network in my phone then I chose the other tel co. .
Regards
anyone using?
i use Sprint PPC 6800 whit RUIM
Sorry, you are telling that u'r Sprint 6800 is in RUIM mode and has an active RUIM card from chinese network?
If yes, is it possible for you to post some pictures of RUIM slot and face of the plate which covers RUIM slot.
Also where this kind of mobile available?
Thanks for your help.
I cant any space inside the Phone where we can place RUIM card
I think we have to use SIM Cutter to Cut out SmartChip and then Solder it using Wires to Board
rak123456 said:
Sorry, you are telling that u'r Sprint 6800 is in RUIM mode and has an active RUIM card from chinese network?
If yes, is it possible for you to post some pictures of RUIM slot and face of the plate which covers RUIM slot.
Also where this kind of mobile available?
Thanks for your help.
Click to expand...
Click to collapse
No updates on this question?
i also using a R-UIM based Sprint Mugol but recently once i upload the ROM it is not connecting to internet. i update the ROM because i want to use EvDO but now i can not connect to internet..not even 1x service. bit angry....about the new ROM.....my custom ROM which is come along with device (from china) is not support EvDO that's y i looked to install the recent updated ROM which shared by Sprint. after i flashed it and flash sucessfully, 1st i can not call but later once i change If R-UIM available mode to R-UIM only mode i now i can make calls and send txt messages but can not connect to internet.
i am desparately looking for a solution to know how i can conect to EvDO using R-UIM card as my R-UIM card is 64k EvDO R-UIM.
help help
Hi,
Could you genius's help me advising if I can use my USB Modem Simcard into HD2 to use internet on the go, so that I dont have to carry heavy laptop. If yes, what setting do i need.
BTW its Virgin USB Modem
[Solved]
Oh.. that's really bad to see that no one replied, anyways found the fix... you can use your USB Modem sim card, through this mobile, and make your mobile as wireless router...
works awesome...
NEed help.. reply to this post for further steps...
no one may have replied because people may not have seen it due to the amount of posts, it could have disapeared of the first page quickly.
anyone, glad you found a solution. If i seen it earlier, i would have been able to say that , yes as long as your hd2 is on virgiin network, or its unlocked it would work. 3g modems take normal phone simcards. infact there is no difference between the sim cards except for the plan that is associated with them. you actually hgave a mobile number, the sim card can even be used to make calls and send texts in a phone but ofcoarse you would get charged for it.
I used to have a 3g modem of tmobile, and i would actually swap sim cards when i used my allowance up, as i had unlimited data plan on both phone and modem. now that i have hd2 i canceled my 3g broadband plan and use just my hd2 (as my phone plane has unlimited date subject to fair use policy, which is 3gb)
Hi,
since my phone was stolen 1 day before my trip to the US, I had to buy another one in California. I asked at the T-Mobile Shop if I could use the HTC HD2 in Germany and they said yes - I just have to wait 6 Weeks and request a unlock code. Now that I am back in Germany, I can't get a Connection with my O2-SIM card. Even with the T-Mobile SIM-Card there is no reception. I tried everything, AutoData Config, Connection Config.
When I click on Set Networks I get a list of all the German Providers (o2, T-Mobile, E-Plus, Vodafone), so the phone actually has reception, but cannot connect. When I click on "Find Network" it says "Cannot register on selected network. Choose another network, or disconnect your data connection and try again".
Is there anything I can do?
Thank you so much for help!
Alex
I don't know what to do... it finds all the networks but I can't connect.
Maybe I should try to flash another Radio?
I have now:
R 2.10.50.26
G 15.39.50.07U
D 2 Energy
Are your Network Type and Band Fequency set to Auto?
fred_up said:
Are your Network Type and Band Fequency set to Auto?
Click to expand...
Click to collapse
Yes, did that! And tried to set the Europe- Types (GSM & 900-1800)
So, now I found something interesting. My original SIM Card from California T-Mobile can't connect to Networks, My ne O2-Sim-Card can't connect to any network either (but they can be found). But another FONIC SIM card (prepaid, germany) can connect to all networks!
I don't understand this...
Have you tried your O2 Sim Card in another working phone?
Ok, now that hurts. Found the solution for my problem: it says in the letter "Before you can use your new SIM card, you have to activate it!" Haha... I was searching the Web for 4 1/2 hours just to find out everything is right and I just have to read...
Thanks so much.
haha thats epic
DN41
*beer* for you good sir... everyone has one of those days.